Masters Degrees in Tissue Engineering & Regenerative Medicine, United Kingdom

Visit our website for more information on fees, scholarships, postgraduate loans and other funding options to study Tissue Engineering and Regenerative Medicine at Swansea University - 'Welsh University of the Year 2017' (Times and Sunday Times Good University Guide 2017).

Every day we are hearing of ground breaking advances in the field of tissue engineering which offer tremendous potential for the future of regenerative medicine and health care. Staff at Swansea University are active in many aspects of tissue engineering.

Key Features of Tissue Engineering and Regenerative Medicine

We are actively researching many aspects of tissue engineering including the following areas:

- Characterisation and control of the stem cell niche

- Mechanical characterisation of stem cells and tissues

- Production of novel scaffolds for tissue engineering

- Electrospinning of scaffold materials

- Cartilage repair and replacement

- Bone repair and replacement

- The application of nanotechnology to regenerative medicine

- Wound healing engineering

- Reproductive Immunobiology

- Bioreactor design

As an MSc By Research Tissue Engineering and Regenerative Medicine student, you will join one of the teams at Swansea University working in tissue engineering and use state of the art research equipment within the Centre for NanoHealth, a collaborative initiative between the College of Engineering and Swansea University Medical School.

The MSc by Research in Tissue Engineering and Regenerative Medicine typically lasts one year full-time, two to three years part-time. This is an individual research project written up in a thesis of 30,000 words.

Aim of Tissue Engineering and Regenerative Medicine programme

The aim of this MSc by Research in Tissue Engineering and Regenerative Medicine is to provide you with a solid grounding within the field of tissue engineering and its application within regenerative medicine.

This will be achieved through a year of research in a relevant area of tissue engineering identified after discussion with Swansea academic staff. Working with two academic supervisors you will undertake a comprehensive literature survey which will enable the formulation of an experimental research programme.

As a student on the MSc by Research Tissue Engineering and Regenerative Medicine course, you will be given the relevant laboratory training to undertake the research program. The research will be written up as a thesis that is examined. You will also be encouraged to present your work in the form of scientific communications such as journals and conference poster presentation.

The MSc by Research in Tissue Engineering and Regenerative Medicine will equip you with a wealth of research experience and knowledge that will benefit your future career in academia or the health care industries.

Recent MSc by Research theses supervised in the area of Tissue Engineering at Swansea University include:

- Quality assurance of human stem cell/primary cell bank

- The development of electrospinning techniques for the production of novel tissue engineering scaffolds.

- The incorporation of pulsed electromagnetic fields into wound dressings.

- The application of pulsed electromagnetic fields for improved wound healing.

- The use of nanoparticles in the control of bacterial biofilms in chronic wounds.

- The control of bacterial adhesion at surfaces relevant to regenerative medicine.

- The production of micro-porous particles for bone repair

Facilities

The £22 million Centre for Nanohealth is a unique facility linking engineering and medicine, and will house a unique micro-nanofabrication clean room embedded within a biological research laboratory and with immediate access to clinical research facilities run by local NHS clinicians.

Links with industry

The academic staff of the Medical Engineering discipline have always had a good relationship with industrial organisations. The industrial input ranges from site visits to seminars delivered by clinical contacts.

The close proximity of Swansea University to two of the largest NHS Trusts in the UK outside of London also offers the opportunity for collaborative research.

Research

The Research Excellence Framework (REF) 2014 ranks Engineering at Swansea as 10th in the UK for the combined score in research quality across the Engineering disciplines.

World-leading research

The REF shows that 94% of research produced by our academic staff is of World-Leading (4*) or Internationally Excellent (3*) quality. This has increased from 73% in the 2008 RAE.

Research pioneered at the College of Engineering harnesses the expertise of academic staff within the department. This ground-breaking multidisciplinary research informs our world-class teaching with several of our staff leaders in their fields.

Highlights of the Engineering results according to the General Engineering Unit of Assessment:

Research Environment at Swansea ranked 2nd in the UK

Research Impact ranked 10th in the UK

Research Power (3*/4* Equivalent staff) ranked 10th in the UK

Read less

Regenerative Medicine
MSc ( 1 year Full-time )

Overview

Regenerative medicine is an interdisciplinary field, which aims to repair diseased or damaged tissues using biological or cell-based technologies. It is a rapidly growing area of biomedical research that encompasses stem cell biology, tissue engineering, drug delivery, and nanotechnology. This MSc course provides advanced, multi-disciplinary training in the scientific principles and clinical applications of regenerative medicine, and is delivered jointly by Barts and The London School of Medicine and Dentistry and the School of Engineering and Materials Science.

Taught modules will develop a strong scientific foundation in the biology of stem cells and regeneration and the fundamental principles of biomaterials, tissue engineering and cellular reprogramming. Through an intensive 12-week research project, students will then gain hands on experience applying these concepts to problems in human health and the development of novel regenerative technologies.

Upon completion of the MSc in Regenerative Medicine, students will be well placed for further training at the PhD level or professional careers in the biotechnology and pharmaceutical industries.

Structure
The MSc in Regenerative Medicine is a one year, full-time programme. Students are required to complete 180 credits comprising taught and research modules.


Taught Modules (15 credits each)

o Cellular and Molecular Basis of Regeneration
o Stem Cell and Developmental Biology
o Advanced Tissue Engineering and Regenerative Medicine
o Research Skills and Methodology
o Biomaterials in Regenerative Medicine
o Tissue-specific Stem Cells
o Induced Pluripotent Stem Cells and Genome Engineering
o Ethics and Regulatory Affairs

Research Project in Regenerative Medicine (60 credits)
During the final 12 weeks of the course, students will work full time on their laboratory-based research projects. Students will select research projects from a wide range of topics in regenerative medicine. Examples include research on the cellular and molecular aspects of tissue regeneration, disease pathogenesis, development of stem cell therapies, design of novel nano-biotechnologies, or engineering biomaterials and tissue scaffolds.


Entry requirements
As a multi-disciplinary course, the MSc is appropriate for a wide range of students. Graduates with degrees in biological sciences or medicine will gain an in-depth understanding of the cellular and molecular aspects of regenerative medicine as well as an introduction to the interdisciplinary fields of biomaterials and tissue engineering. Similarly, students with a physical sciences background will have the opportunity to broaden their experiences and acquire new skills in the biological sciences.
Admission to the course is selective, and based upon academic credentials, research experience, and motivation. At a minimum, students must have an undergraduate degree equivalent to UK second-class honours from a recognised academic institution. Applicants are required to submit a statement of purpose and letter of recommendation with their application.
Applications are accepted all year round, but there are limited places to ensure high-quality training, so please apply early to avoid disappointment.

Read less

The Masters of Research in Tissue Engineering for Regenerative Medicine (TERM) is a collaborative degree course that brings together interdisciplinary expertise from the Faculty of Biology, Medicine and Health and the Faculty of Science and Engineering.

This course provides:
-Postgraduate-level training to equip students from biological, engineering and/or medical-related backgrounds with the specialist knowledge and research skills to pursue a career in the field of tissue engineering/regenerative medicine
-A primary focus on strategies to repair, replace and ultimately regenerate various tissues and organs to solve major clinical problems
-A comprehensive insight into topical issues including stem cells, polymer technology, surface fabrication and gene delivery
-Training for students to identify major clinical needs and formulate novel therapeutic solutions

Tissue engineering/regenerative medicine as a discipline shows enormous potential for future health and, economically, there is a national demand for specific interdisciplinary training in this area.

The University of Manchester has a vast research network in this field comprising international experts from multiple disciplines, and so is extremely well-placed to deliver a truly unique masters course of exceptional quality.

This programme has both taught and research components and is suitable for those with little or no previous research experience.

Career opportunities

After the course, many students will continue their studies and register for a PhD.

However, the programme is also of value to students wishing to progress in the pharmaceutical industry, biotechnology companies or specialist clinical training.

The masters is also ideal for MBChB intercalating students who wish to undertake directly channelled research training in the tissue engineering/regenerative medicine field.

Read less

Tissue engineering is an ever-emerging interdisciplinary field of biomedical research, which combines life, engineering and materials sciences, to progress the maintenance, repair and replacement of diseased and damaged tissues. The Cardiff Institute of Tissue Engineering & Repair (CITER) MSc in Tissue Engineering aims to provide graduates from life sciences and clinical backgrounds with an advanced knowledge, understanding and skills in the science and practice of tissue engineering; from theoretical science, through to research translation and clinical application. The Programme provides in-depth training in this branch of biomedical science, including stem cell biology, biomaterials and tissue/organ engineering. The MSc offers a balanced combination of theory and practice; and can serve either as preparation for a PhD or as a self-contained advanced qualification in its own right. The MSc in Tissue Engineering is both lecture- and laboratory-based, and includes a number of opportunities to visit relevant clinical settings and local industrial partners. Graduates from this Programme will have a broad spectrum of knowledge and a variety of skills, making them highly attractive both to potential employers and research establishments.

Distinctive features of this course include:

• The first course of its kind in the UK, created in response to demand in the field of tissue engineering for interdisciplinary teaching.

• Excellent clinical, academic and research facilities.

• High probability of further research study and careers in tissue engineering and repair, relevant to the CITER MSc remit.

• Opportunity to study at Cardiff University, one of the UK’s major teaching and research universities.

• Opportunity to join a vibrant postgraduate community.

Structure

The CITER MSc Programme commences in September each year with Stage 1, a 6-month, taught component.

Stage 1 is taught almost entirely at a small group teaching level, supported by laboratory sessions, interactive workshops and tutorials, in addition to visits to relevant hospital clinics and local companies involved in producing tissue engineering and repair therapies. Modules are assessed by various written assignments, presentations and formal examinations.

On completing Stage 1, students undertake a 5-month, laboratory-based research project within the CITER network, between April-September (Stage 2). Projects are chosen by students from topics supplied by academic supervisors within CITER. Previous student projects have been in research areas such as embryonic or mesenchymal stem cell biology; cartilage, bone, skin or oral tissue repair; fibrosis; and biomaterials and drug delivery. Stage 2 culminates in the submission of an MSc Dissertation, based on MSc Project findings.

Core modules:

Cellular & Molecular Biology
Tissue Engineering From Concept To Clinical Practice
Research Methods
Stem Cells and Regenerative Medicine
Dissertation

Teaching

Teaching is delivered via lectures, laboratory sessions, interactive workshops and tutorials, in addition to visits to relevant hospital clinics, such as orthopaedics, nephrology and dermatology, and local companies involved in producing tissue engineering and repair therapies.

This Programme is based within the School of Dentistry and taught by academic staff from across Cardiff University and by external speakers.

All taught modules within the Programme are compulsory and students are expected to attend all lectures, laboratory sessions and other timetabled sessions. Students will receive supervision to help them complete the dissertation, but are also expected to engage in considerable independent study. Dissertation topics are normally chosen by the students from a list of options proposed by CITER academic staff in areas relevant to the MSc in Tissue Engineering.

Assessment

The 4 taught Modules within the Programme are assessed through in-course assessments, including:

Extended essays.
Oral presentations.
Poster presentations.
Statistical assignments.
Critical appraisals.
Dissertation (no more than 20,000 words).

Career prospects

After successfully completing this MSc, you should have a broad spectrum of knowledge and a variety of skills, making you highly attractive both to potential employers and research establishments.

Since its introduction in 2006, 95% of our MSc graduates have progressed onto career paths highly relevant to the CITER MSc remit. These include PhDs within CITER and at other UK, EU and USA Universities, Graduate-Entry Medicine, Specialist Registrar Training, Teaching, and positions in Industry and Clinical Laboratory settings.

Placements

You will have the opportunity to attend clinical attachments, in areas such as orthopaedics, nephrology and dermatology. Furthermore, you will also have the opportunity to visit local companies involved in producing tissue engineering and repair therapies for clinical use. These include Cell Therapy Ltd., Reneuron plc, Biomonde Ltd., and MBI Wales Ltd.

Read less

Overview

Located within a European Centre of Excellence for Tissue engineering, and based on Keele University’s local hospital campus, the MSc in Cell and Tissue Engineering provides support and development to enhance your career within this rapidly expanding field. The multidisciplinary environment enables close interaction with leading academics and clinicians involved in cutting-edge, and clinically transformative research.

Course Director: Dr Paul Roach ([email protected])

Studying Cell and Tissue Engineering at Keele

Our MSc Cell and Tissue Engineering programme has tracked alongside the strongly emergent global Regenerative Medicine industry and will prepare you for an exciting future within a range of medical engineering areas, be that in academic or industrial research, medical materials, devices, or therapeutics sectors, or in the clinical arena. The modular structure to the course enables flexibility and personalisation to suit your career aspirations, build upon strengths and interests and develop new understanding in key topics. The selection of modules on offer is professionally accredited by the Institute for Physics and Engineering in Medicine.

Graduate destinations for our students could include: undertaking further postgraduate study and research (PhD); pursuing a university-based, academic research career; providing technical consultancy for marketing and sales departments within industry; working within biomedical, biomaterials, therapeutic and regenerative medicine industries or working for a governmental regulatory agency for healthcare services and products.

See the website https://www.keele.ac.uk/pgtcourses/cellandtissueengineering/

‌The course provides support from the basics of human anatomy and physiology, through to development of novel nanotechnologies for healthcare. Due to the teaching and research involvement of clinical academic staff within the department, there are exciting opportunities to be exposed to current clinical challenges and state-of-the-art developments. Clinical visits and specialist seminars are offered and students will be able to select dissertation projects that span fundamental research to clinical translation of technologies – a truly ‘bench to bedside’ approach.

Learning and teaching methods include lectures and demonstrations from medical and engineering specialists, practical classes using state-of-the-art facilities and seminars with leading national and international researchers. Full-time study will see the course completed in 12 months; part-time study will allow you to complete it over two years.

About the department

Now delivered through the Keele Medical School and the Research Institute for Science and Technology in Medicine, the course dates as far back as 1999, when it was established in partnership with Biomedical Engineering and Medical Physics at the University Hospital. Most teaching now takes place in the Guy Hilton Research Centre, a dedicated research facility located on the hospital campus. The medical school is one of the top-ranked in the UK, and the research institute has an international reputation for world-leading research.

The centre was opened in 2006 and offers state-of-the-art equipment for translational research including newly-developed diagnostic instruments, advanced imaging modalities and additive manufacturing facilities. Its location adjacent to the university hospital ensures that students experience real-world patient care and the role that technology plays in that. Students also have access to advanced equipment for physiological measurement, motion analysis and functional assessment in other hospital and campus-based laboratories. The School embraces specialists working in UHNM and RJAH Orthopaedic Hospital Oswestry, covering key medical and surgical subspecialties.

The course runs alongside its sister course, the MSc in Biomedical Engineering, and an EPSRC-MRC funded Centre for Doctoral Training, ensuring a stimulating academic environment for students and many opportunities for engaging with further study and research.

Course Content

The aim of the course is to provide multidisciplinary Masters level postgraduate training in Cell and Tissue Engineering to prepare students for future employment in healthcare, industrial and academic environments. This involves building on existing undergraduate knowledge in basic science or engineering and applying it to core principles and current issues in medicine and healthcare.

Specifically, the objectives of the course are to:
- provide postgraduate-level education leading to professional careers in Cell and Tissue Engineering in industry, academia and a wide range of healthcare establishments such as medical organisations, medical research institutions and hospitals;

- provide an opportunity for in-depth research into specialist and novel areas of Biomaterials, and Cell and Tissue Engineering;

- expose students to the clinically translational environment within an active medical research environment with hands-on practical ability and supporting knowledge of up-to-date technological developments at the forefront of the field;

- introduce students to exciting new fields such as regenerative medicine, nanotechnology and novel devices for physiological monitoring and diagnostics.

Teaching and Learning Methods

The course is taught through subject-centred lectures and seminars, supported by tutorials and practical exercises. Collaborative learning and student-centred learning are also adopted giving widespread opportunity for group work and individual assignments. Students are required to conduct extensive independent study, and this is supported by full access to two libraries, online journal access and a suite of dedicated computers for exclusive use by MSc students on the course. In addition, students are supported by the guidance of a personal tutor within the department, as well as having access to university-wide support services. This includes English language support where appropriate.

Assessment

Modules will be assessed by a mixture of assessment methods, including lab reports, essays, and presentations, and final examination. This ensures the development of a range of transferrable employability skills such as time management and planning, written and verbal communication and numeracy as well as technical and subject-specific knowledge. The project dissertation forms a major component of the student’s assessed work.

Additional Costs

Apart from additional costs for text books, inter-library loans and potential overdue library fines we do not anticipate any additional costs for this postgraduate programme.

Find information on Scholarships here - http://www.keele.ac.uk/studentfunding/bursariesscholarships/

Read less

Tissue engineering is an ever-emerging interdisciplinary field of biomedical research, which combines life, engineering and materials sciences, to progress the maintenance, repair and replacement of diseased and damaged tissues. The Cardiff Institute of Tissue Engineering & Repair (CITER) MSc in Tissue Engineering aims to provide graduates from life sciences and clinical backgrounds with an advanced knowledge, understanding and skills in the science and practice of tissue engineering; from theoretical science, through to research translation and clinical application. The Programme provides in-depth training in this branch of biomedical science, including stem cell biology, biomaterials and tissue/organ engineering. The MSc offers a balanced combination of theory and practice; and can serve either as preparation for a PhD or as a self-contained advanced qualification in its own right. The MSc in Tissue Engineering is both lecture- and laboratory-based, and includes a number of opportunities to visit relevant clinical settings and local industrial partners. Graduates from this Programme will have a broad spectrum of knowledge and a variety of skills, making them highly attractive both to potential employers and research establishments.

Distinctive features of this course include:

• The first course of its kind in the UK, created in response to demand in the field of tissue engineering for interdisciplinary teaching.

• Excellent clinical, academic and research facilities.

• High probability of further research study and careers in tissue engineering and repair, relevant to the CITER MSc remit.

• Opportunity to study at Cardiff University, one of the UK’s major teaching and research universities.

• Opportunity to join a vibrant postgraduate community.

Course structure

The CITER MSc Programme commences in September each year with Stage 1, a 6-month, taught component.

Stage 1 is taught almost entirely at a small group teaching level, supported by laboratory sessions, interactive workshops and tutorials, in addition to visits to relevant hospital clinics and local companies involved in producing tissue engineering and repair therapies. Modules are assessed by various written assignments, presentations and formal examinations.

On completing Stage 1, students undertake a 5-month, laboratory-based research project within the CITER network, between April-September (Stage 2). Projects are chosen by students from topics supplied by academic supervisors within CITER. Previous student projects have been in research areas such as embryonic or mesenchymal stem cell biology; cartilage, bone, skin or oral tissue repair; fibrosis; and biomaterials and drug delivery. Stage 2 culminates in the submission of an MSc Dissertation, based on MSc Project findings.

Core modules:

Cellular & Molecular Biology
Tissue Engineering From Concept To Clinical Practice
Research Methods
Stem Cells and Regenerative Medicine
Dissertation

Teaching

Teaching is delivered via lectures, laboratory sessions, interactive workshops and tutorials, in addition to visits to relevant hospital clinics, such as orthopaedics, nephrology and dermatology, and local companies involved in producing tissue engineering and repair therapies.

This Programme is based within the School of Dentistry and taught by academic staff from across Cardiff University and by external speakers.

All taught modules within the Programme are compulsory and students are expected to attend all lectures, laboratory sessions and other timetabled sessions. Students will receive supervision to help them complete the dissertation, but are also expected to engage in considerable independent study. Dissertation topics are normally chosen by the students from a list of options proposed by CITER academic staff in areas relevant to the MSc in Tissue Engineering.

Support

All Modules within the Programme make extensive use of Cardiff University’s Virtual Learning Environment (VLE) Blackboard, on which students will find course materials and links to related materials. Students will be supervised when undertaking their dissertation. Supervision will include scheduled regular meetings to discuss progress, provide advice and guidance; and provide written feedback on draft dissertation contents.

Feedback:

Students will receive written feedback on all assessments, in addition to oral feedback on assessed oral/poster presentations.

Assessment

The 4 taught Modules within the Programme are assessed through in-course assessments, including:

Extended essays.
Oral presentations.
Poster presentations.
Statistical assignments.
Critical appraisals.
Dissertation (no more than 20,000 words).

Career prospects

After successfully completing this MSc, you should have a broad spectrum of knowledge and a variety of skills, making you highly attractive both to potential employers and research establishments.

Since its introduction in 2006, 95% of our MSc graduates have progressed onto career paths highly relevant to the CITER MSc remit. These include PhDs within CITER and at other UK, EU and USA Universities, Graduate-Entry Medicine, Specialist Registrar Training, Teaching, and positions in Industry and Clinical Laboratory settings.

Read less

Biomedical Engineering is a field of engineering that relies on highly inter- and multi-disciplinary approaches to research and development, in order to address biological and medical problems. Specialists in this area are trained to face scientific and technological challenges that significantly differ from those related to more traditional branches of engineering. Nevertheless, at the same time Biomedical Engineering makes use of more traditional engineering methodologies and techniques, which are adapted and further developed to meet specifications of biomedical applications.

This MSc programme covers the following topics:

• Fundamentals of human physiology;
• Ethics and regulatory affairs in the biomedical field;
• Advanced aspects of tissue engineering, regenerative medicine and biomaterials;
• Advanced techniques to synthesize and/or characterise materials for biomedical engineering;
• Mechanics of tissues, cells and sub-cellular components;
• Biocompatibility of implantable materials and devices;
• Materials and techniques for nanotechnology and nanomedicine.

Applications are welcome from students with a background in physical sciences (Chemistry, Physics, Mathematics and Materials Science) or Engineering.The programme has strong roots within the well-recognised expertise of the academics that deliver the lectures, who have international standing in cutting-edge research on Biomaterials and Tissue Engineering.

This fact ensures that the programme is delivered with the highest standards in the field. The students also benefit from access to state-of-the-art facilities and instrumentation in the areas of Biomaterials and Tissue Engineering, while undertaking research projects in brand-new large laboratories that are the result of a recent multi-million investment from the College.

The programme is designed with a careful balance of diversified learning components, such that, on completion of their studies, the postgraduates acquire extensive knowledge and skills that make them able to undertake careers in a wide range of professional ambits within the biomedical field, including health care services, industry and scientific research

Read less

The Masters in Biomedical Engineering is an interdisciplinary programme that will equip you for employment within the biomedical engineering sector. This programme addresses all the key aspects of biomedical engineering.

WHY THIS PROGRAMME

The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
Biomedical Engineering is the newest division of the School, bringing together our long standing expertise. Research covers four themes, Biomaterials and Tissue Engineering, Bionanotechnology, Rehabilitation Engineering, Biosensors and Diagnostics.
The course is based on in-depth modules and individual projects, which are designed to give graduates an opportunity to specialise in specific areas of Biomedical Engineering or to cover a more general Biomedical Engineering syllabus.
This taught MSc/PG Dip offers a wide exposure to the philosophy and practice of Biomedical Engineering whilst simultaneously enabling the students to deepen their knowledge of specific areas of biomedical engineering disciplines, which have been chosen on the basis of the research strengths of the Discipline. The choice includes Biomaterials and Biomechanics including their application in Tissue Engineering and Regenerative Medicine, Rehabilitation Engineering includes applied within Glasgow hospital and bioelectronics and diagnostic systems, designed to be applied from advanced hospitals to out-in-the-field situations.
The compulsory part provides the basic underlying knowledge need throughout biomedical engineering these core courses are taken in both semesters to allow a wide range of optional subjects to be available.
You will broaden and/or deepen your knowledge of biomedical engineering disciplines.

Programme structure

Modes of delivery of the MSc in Biomedical Engineering include lectures, seminars and tutorials and allow students the opportunity to take part in lab, team work and study trips in the UK. You will undertake an MSc project working on a specific research area with one of the academics.

Core courses

Applications of biomedical engineering
Biological fluid mechanics
Cellular biophysics
Energy in biological systems
Medical imaging
Statistics for biomedical engineering
MSc project.
Optional courses

Advanced imaging and therapy
Applied engineering mechanics
Bioinformatics and systems biology
Biomechanics
Biosensors and diagnostics
Microscopy and optics
Nanofabrication
Rehabilitation engineering
Scaffolds and tissues
Signal processing of bio-signatures
Tissue and cell engineering.

Career prospects

Career opportunities include positions in rehabilitation engineering, biomaterials for reconstructive surgery, biosensors, device and implant design and development, and biosignal processing.

Read less

Nanotechnology and Regenerative Medicine are rapidly expanding fields with the potential to revolutionise modern medicine. This cross-disciplinary programme provides students with a robust scientific understanding in these fields, combined with a "hands-on" practical and translational focus.

Degree information

This programme will equip students with a critical understanding of:
-How nanotechnology can be harnessed for the improved detection and treatment of disease.
-The use of stem cells in medicine.
-Tissue engineering strategies for tissue regeneration.
-Improving biomaterials for directing cell behaviour.
-The regulatory, ethical and commercial hurdles for the translation of these emerging technologies.

Students undertake modules to the value of 180 credits.

The programme consists of five core modules (75 credits), one optional module (15 credits) and a research project (90 credits). A Postgraduate Certificate (60 credits) is offered. The programme consists of two core modules (30 credits) and two optional modules (30 credits).

Core modules
-Nanotechnology in Medicine *
-Applied Tissue Engineering *
-Biomaterials
-Research Methodologies
-Practical Bio-Nanotechnology and Regenerative Medicine
-*PG Cert - compulsory modules

Optional modules - choose one of the following options; attendance at the other module is possible but will not be assessed.
-Stem Cells in Medicine and their Applications in Surgery
-Translation of Nanotechnology and Regenerative Medicine

Dissertation/report
All students undertake an extensive laboratory-based (90 credits) research project which culminates in a dissertation of c.15,000 words and an individual viva voce.

Teaching and learning
The programme is delivered through a combination of lectures, tutorials, workshops, group discussions, practical sessions, and demonstrations. Assessment is through presentations, problem-solving workshops, written practical reports, coursework, unseen written examinations and the dissertation.

Careers

Student career options and progression during and following the completion of the degree are considered to be of the utmost importance. Personal tutors will offer individual advice and seminars are arranged on a variety of career competencies including CV writing, writing research proposals and positive personal presentation.

Networking with world-leading scientists, new biotechnology CEO's and clinicians is encouraged and enabled throughout the programme. Research output in terms of publishing papers and presenting at conferences is also promoted.

Recent career destinations include:
-PhD or Medicine at UCL, Imperial College London and Universities of Oxford and Cambridge
-Clinical PhD training programmes
-NHS hospitals in the UK
-EU and overseas hospitals and research facilities

Top career destinations for this degree:
-Health Careers Program, Harvard University
-PhD Medicine, Queen's University, Belfast
-PhD Bioengineering, Imperial College London
-PhD Nanomedicine, UCL
-DPhil Researcher (Biomedical Sciences), University of Oxford and studying MSc Nanotechnology and Regenerative Medicine, -University College London (UCL)

Employability
Graduates of the programme gain the transferable laboratory, critical and soft skills, such as science communication, necessary to pursue a scientific or clinical research career in the fields of nanomedicine and regenerative medicine.

Why study this degree at UCL?

Based within the world-leading medical research environment of the UCL Division of Surgery and Interventional Science this MSc retains a clinical focus and addresses real medicine needs. Students learn about the route of translation from research ideas into actual products which can benefit patients.

An in-depth laboratory-based research project is an integral component of the programme: expert support allows students to investigate cutting-edge projects and thereby open up opportunities for further research and publications.

Students are embedded within the vibrant research community of the Faculty of Medical Sciences which provides students - through research seminars, symposia and eminent guest lecturers - outstanding networking opportunities within the research, clinical and translational science communities.

Read less

The Exciting Area of Regenerative Medicine

Regenerative Medicine is a vibrant area multidisciplinary area, encompassing life science and medicine, pharmaceutical-related approaches, as well as the use of cell-based therapies, to include also various types of stem-cells, bioactive scaffolds and drug delivery modalities. This 21st Century Medicine holds the promise of contributing to the development of alternatives to long-term, high-cost care approaches for many degenerative and age-related diseases, but at the same time is a rich area for question-driven research.

About the Course

The MSc Regenerative Medicine (taught masters) will provide students with a multidisciplinary approach to gaining a critical knowledge and training in the biological and chemical basis of tissue regeneration. You will cover subject such as stem cell biology, biotechnology, and tissue engineering. Students will be also made aware of the basics of intellectual property law, regulatory affairs, and ethical issues playing a role in the regenerative medicine industry. The delivery of the course comprises a mixture of structured taught modules, practical activities and self-directed study. The degree culminates in a laboratory-based research dissertation project.
Students will access high-specification laboratory facilities and benefit from the expertise of academics active in research projects at national and international level, with numerous opportunities to network with expert in the fields.

It is a vibrant area of endeavour, involving multidisciplinary interactions and strong employment opportunities for those trained in the field. Master Graduates will be well placed to secure jobs in academic research, as well as a wide range of careers outside the laboratory to include biotechnology business, legal sciences, and science communication. Additionally, the course prepares students for studies at PhD level.

Module on this Course

The delivery of the course Comprises a mixture of structured taught modules, practical activities and self-directed study. Students are set regular tasks and formative assessments helping strengthening skills of communication, team working, and self-evaluation. The Master degree culminates with a research project dissertation providing you with the opportunity to fully engage with contemporary research in the field; numerous opportunities for conducting part or the entirety of this research project outside the University or abroad can be discussed as required.

These are the Modules on this Course:
• Cell Biology and Biotechnology
• Developmental Biology and regeneration
• Advanced Laboratory Skills
• Research Methods
• Stem Cell Biology
• Cell Therapy and Tissue Engineering
• Dissertation Project

Read less

This programme aims to provide a high level of scientific knowledge and understanding of stem cell biology and regenerative medicine - from the molecular to the whole system level.

Course Outline & Modules

This programme aims to provide a high level of scientific knowledge and understanding of stem cell biology and regenerative medicine - from the molecular to the whole system level. The programme aims to enable students to develop an informed and critical appreciation of recent scientific developments in these areas of modern biomedical sciences and its clinical and industrial application, as well as a practical skill set for further research and learning, e.g. PhD studies.

The opportunity to undertake a work experience placement will enable students to further their employability and transferable skills and develop links with participating clinical and industrial partners.

This course offers a flexible framework of core and optional modules. The core modules are:
-Advanced Laboratory Skills with data analysis and interpretation
-Understanding Professional Practice & Enhancing your Employability
-Mammalian Cell Biology and Culture
-Stem Cells and Tissue Engineering Technology
-Tissue Formation, Function and Repair
-Models of Regeneration I

Optional modules include, but are not limited to:
-Ageing and Regenerative Medicine
-Transplantation Biology
-Finance and Business Management

Note that not all options may be available in any one year and that options will not proceed if the minimum student intake number is not reached.

Learning, Teaching & Assessment

The programme is delivered using a combination of lectures, practical classes, tutorials and seminars. Some modules will include group work. The core employability module will use visiting lecturers from industry to illustrate the potential employment avenues for graduates of this course. The course includes a research project, this is likely to be a laboratory-based project where students will collect and analyse their own data. Assessment methods employed include examinations and continuous assessment through coursework; these will differ for individual modules.

Career Opportunities

Completion of this course prepares students for a research-focussed role in industry, including the developing clinical field of stem cell therapies of regenerative medicine, or academia. Graduates can therefore expect to enter further research, in the form of a PhD or research assistant, or may undertake a career in the commercial or clinical sector.

Personal Development

Completion of this course prepares students for a research-focussed role in industry, including the developing clinical field of stem cell therapies of regenerative medicine, or academia. Graduates can therefore expect to enter further research, in the form of a PhD or research assistant, or may undertake a career in the commercial or clinical sector.

Read less

About the course

A multi-disciplinary course, students will be introduced to the field of biomaterials, and important factors in the selection, design, and development of biomaterials for clinical applications. You’ll develop an understanding of biomaterials science, engineering, regenerative medicine and associated specialisms.

This course will be of particular interest to students interested in facilitating their development into the medical field aiming to contribute in the health care sector.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Materials for Biological Applications; Scientific Writing and Health Informatics; Polymers Materials Chemistry; Biomaterials II (Advances in Biomaterials); Tissue Engineering and Regenerative Medicine; Structural and Physical Properties of Dental and Biomaterials.

Examples of optional modules

Group Projects in Bioengineering; Dental Materials Science; Tissue Structure and Function; Design of Medical Devices and Implants; Introduction to Digital Dentistry and Dental Manufacturing.

Read less

This programme focuses in particular on modern research in developmental biology, stem cell biology and tissue engineering with its potential applications to medicine and is a collaborative programme within the Centre for Regenerative Medicine.

The MRes provides a unique mix of taught components, extended laboratory projects, literature reviews and preparation of a grant proposal based on a research dissertation.It gives students an insight into a range of state-of-the-art research activities and techniques, and provides generic, transferable skills training needed for all early stage researchers. The programmes also address the scientific, ethical and commercial context within which the research takes place.All of the MRes programmes can be studied as the first year of our Integrated PhD programme.

Visit the website http://www.bath.ac.uk/science/graduate-school/taught-programmes/mres-regen-medicine/

Why study Biology and Biochemistry with us?

- Biology & Biochemistry ranked 2nd in the Sunday Times University Guide 2013
- 90% of our research judged to be internationally recognised, excellent or world-leading
- Our current research funding portfolio stands at £14 million, supporting internationally excellent research in the biosciences

What will I learn?

MRes degree programmes are designed for graduates who are contemplating a research career and who may go on to study for a PhD or to a position in industry involving interaction with research scientists.

If these do not apply, you might consider an MSc programme (http://www.bath.ac.uk/science/graduate-school/taught-programmes/).

For further information please visit our department pages (http://www.bath.ac.uk/bio-sci/)

Career opportunities

Since graduating, our students have gone on to employment or further research at institutions in the US, Europe, Australia, Asia and Africa.

Recent employers include:

Morvus-Technology Ltd
Janssen-Cilag
Royal United Hospital, Bath
Ministry of Defence
State Intellectual Property Office, Beijing
Wellcome Trust Centre for Human Genetics, Oxford University
AbCam
Salisbury Foundation Trust Hospital
BBSRC
Lonza

Find out more about the department here - http://www.bath.ac.uk/bio-sci/

Find out how to apply here - http://www.bath.ac.uk/science/graduate-school/taught-programmes/how-to-apply/

Read less

This programme aims to impart a robust scientific understanding of burns, plastic and reconstructive surgery, and to equip healthcare professionals (doctors, surgeons, nursing staff and physiotherapists) and scientists with the research techniques and translational tools necessary for research in this expanding field.

Degree information

Students will acquire both scientific and clinical research skills in plastic and reconstructive surgery, develop the necessary transferable skills (laboratory, critical, synthetic), and acquire an appreciation of the needs and requirements of patients requiring this speciality.

Students undertake modules to the value of 180 credits for the MSc. The programme consists of five core modules (75 credits), one optional module (15 credits) and a research project (90 credits). A Postgraduate Certificate (60 credits) is offered. The programme consists of two core modules (30 credits) and two optional module (30 credits).

Core modules
-Plastic and Reconstructive Surgery Burns
-Military Injury and Wound Healing
-Biomaterials in Regenerative Medicine
-Research Methodology
-Applied Tissue Engineering

Optional modules - choose one of the following options:
-Nanotechnology in Medicine
-Translation of Nanotechnology and Regenerative Medicine
-Advanced Surgical Skills in Microsurgery
-Stem cells and their applications in Surgery

Dissertation/report
All students undertake an independent research project which culminates in a dissertation of ~15,000 words and a viva.

Teaching and learning
The programme is delivered through a combination of lectures, tutorials, workshops, practical sessions, group discussions and distance learning. Assessment is through written examination, coursework, presentation, dissertation and viva voce.

Careers

Establishing a career in surgery is becoming very competitive, and students on this programme benefit from the latest knowledge and experience in this expanding field. On completion, graduates find they are in a better position to find placements due to the wide exposure they have had to emerging technologies such as nanotechnology, regenerative medicine, and speciality plastic surgery. This MSc also provide our students with an excellent foundation for further research either at MD or PhD level or for a career as a clinician or healthcare professional within this surgical speciality.

Top career destinations for this degree:
-Plastic Surgery Trainee Registrar, NHS (National Health Service)
-MSc Burns, Plastic and Reconstructive Surgery, UCL
-PhD Interventional Science, UCL
-PhD Surgery and Interventional Science, UCL

Employability
This MSc focuses on research as well as theory and students acquire technical, laboratory-based skills. Networking is also one of the key aspects of this programme. Consultant plastic surgeons from both military and civilian backgrounds present lectures, giving students access to one-on-one contact and a multitude of networking opportunities.

Why study this degree at UCL?

This is the only MSc programme in burns, plastic and reconstructive surgery currently in the UK, and addresses a national need.

Clinical staff who undertake teaching include renowned consultants based at the Royal Free Hospital.

The Division of Surgery & Interventional Science is part of one of the most prestigious medical schools in Europe; it is made up of nearly 400 people from surgeons and oncologists to clinical trials specialists and researchers. Its aim is to understand the causes of human disease and develop innovative therapies and technology to improve the quality of life.

Read less

Visit our website for more information on fees, scholarships, postgraduate loans and other funding options to study Medical Engineering at Swansea University - 'Welsh University of the Year 2017' (Times and Sunday Times Good University Guide 2017).

Medical Engineering is the application of engineering principles to both the human body and to a broad range of instrumentation used in modern medicine.

The courses at Swansea University draw on the exciting medical research that is taking place within the College of Engineering and the College of Medicine. The research success in the two colleges led to the creation of the £22 million Centre for NanoHealth (CNH), a unique facility linking engineering and medicine.

Our Medical Engineering graduates gain the skills of engineering, whilst also providing employers with the added experience and knowledge of anatomy and physiology, and the ability to communicate with clinicians.

Read less