• University of Derby Online Learning Featured Masters Courses
  • University of Southampton Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • University of Leeds Featured Masters Courses
  • Aberystwyth University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • Northumbria University Featured Masters Courses

Postgrad LIVE! Study Fair

Birmingham | Bristol | Sheffield | Liverpool | Edinburgh

University of Leeds Featured Masters Courses
University of Reading Featured Masters Courses
Durham University Featured Masters Courses
University of Cambridge Featured Masters Courses
ETH Zürich Featured Masters Courses
United Kingdom ×
0 miles
Engineering×

Masters Degrees in Thermodynamics, United Kingdom

We have 23 Masters Degrees in Thermodynamics, United Kingdom

  • Engineering×
  • Thermodynamics×
  • United Kingdom ×
  • clear all
Showing 1 to 15 of 23
Order by 
The Thermal Power and Fluid Engineering MSc is a highly successful course which has been offered here for almost forty years. Read more
The Thermal Power and Fluid Engineering MSc is a highly successful course which has been offered here for almost forty years. The aim of this postgraduate course is to train and educate thermofluid engineers to enable them to meet present and future demands of the industry and to equip them with the necessary skills to engage in employment or further research.

The course is suitable for engineering/science graduates and professionals who not only wish to enhance their expertise in thermofluids but also to develop their competence in the use of state-of-the-art analytical, computational and experimental methods; advanced methods which are specifically designed for the analysis of heat and fluid flow in both industrial and research applications.

The objectives of this course are to produce postgraduate specialists with:
-Advanced understanding of heat and fluid flow processes and their role in modern methods of power generation
-In-depth understanding of numerical and experimental techniques in heat and fluid flow

Teaching on the course is delivered by academics from our world-leading research group in the field of turbulence modelling and heat transfer.

Special features

The three students who achieve the highest performance in this MSc course in 2016-17 will receive an award.

The winners of the Thermal Power and Fluid Engineering Merit Award are presented with a certificate by the Head of the School, Prof Andy Gibson, and are awarded a cash prize. The awards are £3,000 for the top student, £2,000 for the second and £1,000 for the third student in each semester.

The winners of the award this semester were: Aseem Bhavnesh Desai (1st), Robert O'Donoghue (2nd) and Luca Cappellone (3rd).

Teaching and learning

This is a full-time course studied over 12 months with one start date each year in September. Every year this MSc course in Thermal Power and Fluid Engineering attracts a large number of applications from all around the world, which allows us to select only the best candidates.

Throughout the course, alongside the teaching, special emphasis is placed on both computational and experimental work; the aim is to provide insight through experimentally observed phenomena, and also to provide practical/computational experience of a wide range of measurement and data analysis techniques. Thus, the course has a strong practical orientation which is supported by our School laboratories and facilities and it aims to produce engineers who are able to engage in the design, development and testing of internal combustion engines, turbines or power producing devices. Whilst on the course, students have the opportunity to participate in a number of industrial visits. Relevant companies sometimes offer projects to our students as a result of these visits.

The MSc is continually reviewed and now includes course units such as research and experimental methods, advanced fluid mechanics, advanced heat transfer, engineering thermodynamics, power engineering and computational fluid dynamics. Students are assessed based upon a combination of coursework, laboratory calculations, exams and projects. Upon successful completion of taught modules the students are required to do a research dissertation.

Career opportunities

The MSc in Thermal Power and Fluid Engineering trains graduates in the theory and practice of a broad range of industrially relevant topics within the fields of thermodynamics and fluid mechanics. It is specifically designed to meet the needs of the modern engineer both in industry and in research. Most of our research is derived and funded by industry, and we have always been proud of maintaining strong links with our industrial partners. Teaching staff on this course have research-based collaborations with multinational companies such as Boeing, Airbus, Rolls Royce, Jaguar Land rover, Électricité de France, Procter and Gamble, Unilever, Dyson, Alstom and many others.

Each year Manchester careers fairs, workshops and presentations attract more than 600 exhibitors and 20,000 visitors illustrating how employers target Manchester graduates.

Our recent graduates have gone on to work in internationally renowned companies including:
-Airbus, UK
-Électricité de France, UK
-Jaguar Land Rover, UK
-Dassault Systèmes, France
-Honda Motors, UK
-Doosan Global, UK
-ExxonMobil, UK
-Saudi Aramco, KSA
-Engro Chemicals, Pakistan
-Abu Dhabi National Oil Company, UAE
-ANSYS, UK
-ABB Group, UK
-Exa GmbH, UK

Accrediting organisations

This Masters Course is accredited by the IMechE, the Institution of Mechanical Engineers which is the UK's professional body of Mechanical Engineers. This means that graduates from this course are recognised by the IMechE as having the academic qualifications required of candidates for the status of Chartered Engineer.

Read less
This programme has been designed to meet the challenges of the rapidly changing global market by providing the skills and abilities to contribute to the availability of well-designed products, process and systems. Read more
This programme has been designed to meet the challenges of the rapidly changing global market by providing the skills and abilities to contribute to the availability of well-designed products, process and systems.

As a broad-based Mechanical Engineering degree this programme provides a wide variety of career options in the engineering sector.

Core study areas include experimental mechanics, simulation of advanced materials and processes structural analysis, computer aided engineering, engineering design methods, sustainable development: the engineering context, the innovation process and project management, thermofluids and a project.

See the website http://www.lboro.ac.uk/study/postgraduate/programmes/departments/mechanical-manufacturing/mechanical-engineering/

Programme modules

- Experimental Mechanics
This module introduces the following elements: experimental techniques for analysis and characterisation of various engineering materials and full-field, non-contact optical methods for deformation and strain measurements. Students will learn to identify the most appropriate experimental techniques for evaluating material response in a specific setting and for different types of materials.

- Simulation of Advanced Materials and Processes
The objective of this module is to introduce students to the concepts in numerical simulation of advanced materials and processes. To enable students to gain theoretical and practical experience in simulating mechanical behaviour of advanced materials and modelling processes related to these materials using finite element modelling techniques.

- Structural Analysis
Students will gain an understanding of modern concepts of structural analysis. They will gain practical experience in analyses of structures using finite-element modelling and understand the need for structural analysis in design.

- Computer Aided Engineering
Students will learn how to evaluate, choose and implement CAE systems. Students will learn to select and apply appropriate computer based methods and systems for modelling engineering products; analysing engineering problems; and assisting in the product design process.

- Engineering Design Methods
The aims of this module are to provide students with a working understanding of some of the main methods which may be employed in the design of products and systems. Students will learn to identify appropriate methods and techniques for use at different times and situations within a project.

- Sustainable Development: The Engineering Context
The objective of this module are to provide students with an understanding of the principles and practices of sustainable development and to provide them with an understanding of how engineers can help manufacturing businesses develop into more sustainable enterprises.

- The Innovation Process and Project Management
This module allows students to gain a clear overview of the innovation process and an understanding of the essential elements within it. Students will learn strategies for planning and carrying out innovative projects in any field.

- Thermofluids
In this module students study the fundamentals of combustion processes and understand key aspects relating to performance and emissions. Students develop knowledge and skills required by engineers entering industries involved in the design and use of combustion equipment.

- Project
In addition to the taught modules, all students undertake an individual major project. Part-time students normally undertake a major project that is based on the needs of their employing company.

How you will learn

You will learn through a carefully balanced combination of lectures, in-class guided workshops, hands-on computer modelling and independent research.

The programme consists of eight, week-long, taught lecture modules plus project work. Each taught module is self-contained and covers a complete target. This programme is available in both full-time and part-time forms. Full-time students commence their studies on the first Monday in October for a period of 12 months. Part-time students may commence their registration at any time between October and the following March, and take 3 years (typical) to complete the programme.

On completion of this programme, students should be able to:
- Plan and monitor multi-disciplinary projects;
- appreciate the central role of design within engineering;
- demonstrate competence in using computer based engineering techniques;
- analyse and understand complex engineering problems; and
- use team working skills and communicate effectively at an advanced technical level.

Facilities

As a student within the School of Mechanical and Manufacturing Engineering you will have access to a range of state-of-the-art equipment. Our computer labs are open 24/7 and use some of the latest industry standard software including STAR-CCM and CAD.

We have high-tech laboratories devoted to:
- Dynamics and control
- Electronics
- Fluid mechanics
- Materials
- Mechatronics
- Metrology
- Optical engineering
- Structural integrity
- Thermodynamics

Careers and further study

The programme will allow students to acquire the technical and transferable skills required to succeed in a career in industry or academic research. Graduates may also study for an MPhil or PhD with the School.

Scholarships

The University offers over 100 scholarships each year to new self-financing full-time international students who are permanently resident in a country outside the European Union. These scholarships are to the value of 25% of the programme tuition fee and that value will be credited to the student’s tuition fee account.
You can apply for a scholarship once you have received an offer for a place on this programme.

Why Choose Mechanical and Manufacturing Engineering at Loughborough?

The School of Mechanical and Manufacturing Engineering is a leader in technological research and innovation, with extensive national and international industrial links, and a long standing tradition of excellent teaching.

Our Industrial Advisory Committee, comprising of engineers at senior levels in the profession, ensures that our programmes contain the optimal balance of subjects and industrial relevance, with our programmes accredited by the Institution of Mechanical Engineers, Institution of Engineering and Technology and Institution of Engineering Designers.

- Facilities
The School has laboratories devoted to disciplines such as; dynamics and control, automation, fluid mechanics, healthcare engineering, internal combustion engines, materials, mechatronics, metrology, optical engineering, additive manufacturing, sports engineering, structural integrity and thermodynamics.

- Research
The School has a busy, multi-national community of well over 150 postgraduate research students who form an important part of our internationally recognised research activities.
We have seven key research centres (Electronics Manufacture, Intelligent Automation, Regenerative Medicine Embedded Intelligence, High Efficiency SCR for Low Emission Vehicles and High Value Manufacturing Catapult Centre) and we are a lead governing partner in the newly formed UK Manufacturing Technology Centre.

- Career prospects
90% of our graduates were in employment or further study within six months of graduating. Our graduates go on to work with companies such as Airbus, BAE Systems, Caterpillar, EDF Energy, Ford, IBM, Jaguar Land Rover, Millbrook Proving Ground, Rolls Royce and Tata Steel.

Find out how to apply here http://www.lboro.ac.uk/study/postgraduate/programmes/departments/mechanical-manufacturing/mechanical-engineering/

Read less
Could you see yourself designing high performance bikes, working with racing car teams or producing ground breaking medical components? You could follow in the footsteps of some of our graduates and begin shaping your own exciting career in mechanical engineering. Read more
Could you see yourself designing high performance bikes, working with racing car teams or producing ground breaking medical components? You could follow in the footsteps of some of our graduates and begin shaping your own exciting career in mechanical engineering.

You will distinguish yourself professionally with a degree accredited by the Institution of Mechanical Engineers (IMechE) and the Institute of Materials, Minerals and Mining (IoM3) for Chartered Engineer status. You can apply to either of these institutions for membership as a Chartered Engineer.

Key features

-Open the door to a successful future. Our graduates have gone on to work for Ferrari, Honda, British Cycling, Rolls-Royce, Williams Grand Prix Engineering, Activa, Babcock Marine, Princess Yachts and more.
-Primed for your career: 82 per cent of our students are in a professional or managerial job six months after graduation. (Source: unistats)
-Benefit from an optional 48 week paid work placement.
-Distinguish yourself professionally with a degree accredited by the Institution of Mechanical Engineers (IMechE) and the Institute of Materials, Minerals and Mining (IoM3) for Chartered Engineer status. You can apply to either of these institutions for membership as a Chartered Engineer.
-Develop a strong foundation in mechanical engineering principles and materials science.
-Choose from specialist modules in composites engineering, design and manufacture.
-Experience modern laboratory facilities for practical work which is a core part of the degree.
-Benefit from working on industrially relevant problems within composite materials and design of composite structures.

Course details

Year 1
In Year 1, you’ll acquire a sound foundation in design, mechanics, materials, electrical principles, thermo-fluids, mathematics and business, learning by active involvement in real engineering problems. You‘ll undertake a popular hands-on module in manufacturing methods. Modules are shared with the MEng and BEng (Hons) in Mechanical Engineering and the MEng and BEng (Hons) Marine Technology.

Core modules
-MECH120 Skills for Design and Engineering (Mechanical)
-THER104 Introduction to Thermal Principles
-BPIE115 Stage 1 Mechanical Placement Preparation
-MECH117 Mechanics
-MECH118 Basic Electrical Principles
-A5MFT1 Mech BEng 1 MFT Session
-MATH187 Engineering Mathematics
-MATS122 Manufacturing and Materials
-MECH121PP Team Engineering (Engineering Design in Action)

Year 2
In Year 2, you’ll build your knowledge of composite materials in preparation for specialist modules in the final year. The central role of design integrates with other modules like structures and materials. You'll also study modules on thermodynamics, fluid mechanics, business dynamics, mathematics and control and quality management.

Core modules
-BPIE215 Stage 2 Mechanical Placement Preparation
-CONT221 Engineering Mathematics and Control
-HYFM230 Fluid Mechanics 1
-STRC203 Engineering Structures
-MECH232 Engineering Design
-MFRG208 Quality Management l
-MATS234 Materials
-THER207 Applied Thermodynamics
-STO208 Business for Engineers

Optional placement year
In Year 3, you're strongly encouraged to do a year’s work placement to gain valuable paid professional experience. We will support you to find a placement that is right for you. Our students have worked for a variety of companies from BMW Mini, Bentley, Babcock Marine to NASA. A successful placement could lead to sponsorship in your final year, an industrially relevant final year project, and opportunities for future employment.

Optional modules
-BPIE335 Mechanical Engineering Related Placement

Year 4
In Year 4, you’ll specialise in composites design, engineering and manufacture. You’ll undertake an group design project. Additional modules of study include statistics and quality management. You'll also develop your knowledge and skills through an in-depth project on a topic of your choice.

Core modules
-HYFM322 Computational Fluid Dynamics
-MFRG311 Quality Management II
-MATS347 Composites Design and Manufacture
-PRME307 Honours Project
-MATS348 Composites Engineering
-MECH340 Engineering Design

Final year
In your final year, you'll extend your existing skills in engineering design, analysis and control theory. Broaden your knowledge by studying subjects such as entrepreneurship, advanced information technology, robotics and marine renewable energy. You’ll also work in a design team with students from other engineering disciplines working on projects such as design, materials and environmental issues related to bioenergy production, gas/nuclear power stations, energy from the sea and eco villages.

Core modules
-MECH532 Applied Computer Aided Engineering
-MECH533 Robotics and Control
-MECH534 Product Development and Evaluation
-MAR528 Mechanics of MRE Structures
-PRCE513 Interdisciplinary Design
-MECH544 Data Processing, Simulation and Optimisation of Engineering Systems

Every undergraduate taught course has a detailed programme specification document describing the course aims, the course structure, the teaching and learning methods, the learning outcomes and the rules of assessment.

Read less
The Mechanical Engineering MSc builds on your undergraduate knowledge base through a number of advanced modules in core subject areas. Read more

About the course

The Mechanical Engineering MSc builds on your undergraduate knowledge base through a number of advanced modules in core subject areas. These are supported by modules in business and electromechanics, providing you with an insight of the engineering business environment and broadening your understanding of other engineering disciplines.

The course provides you with an understanding of the methodology used in research and an awareness of the numerical techniques underpinning the tools employed in mechanical and thermal analysis.

Topicality and direct application to the needs of society are also catered for, providing you with an understanding of the environmental impact of human activities and energy consumption and the role of the mechanical engineer in seeking appropriate solutions.

Course Structure

Modules

First semester (September to January)

• Electromechanics
• Engineering Business Environment and Energy Studies
• Numerical Techniques in Engineering
• Advanced Thermodynamics and Heat Transfer

Second semester (February to May)

• Advanced Solid Mechanics
• Research Methods
• Engineering Systems Dynamics and Control
• Advanced Materials and Design

Third semester (June to September)

• This is a major research-based individual project

Optional placement
We offer a great opportunity to boost your career prospects through an optional one year placement as part of your postgraduate studies. We have a dedicated Placement Unit which will help you obtain this. Once on your placement you will be supported by your Visiting Tutor to ensure that you gain maximum benefit from the experience. Placements begin after the taught component of the course has been completed - usually around June - and last for one year. When you return from your work placement you will begin your dissertation.

Teaching and assessment

The modules are delivered through a mixture of lectures, tutorials and laboratories. This ensures a good balance between theory and practice so that real engineering problems are better understood through an underpinning of strong theoretical and analytical knowledge translated into practical skills.

Contact and learning hours

You will normally attend four hours of timetabled taught sessions each week for each module undertaken during term time; for full-time study this would be 16 hours per week during term time. You can expect to also undertake around 24 further hours of independent study and assignments as required per week.

Academic expertise

Mechanical Engineering teaching staff are active in several important research areas, including: Combustion modelling and energy conversion research using both experimental and CFD methods to analyse efficiencies and emissions of energy systems Computational rheology, non- Newtonian biofluid simulations, viscoelastic effects on lubrication thin film flows Surface engineering via surface modification of materials for enhancement of mechanical, tribological and chemical properties.

To find out more

To learn more about this course and DMU, visit our website:
Postgraduate open days: http://www.dmu.ac.uk/study/postgraduate-study/open-evenings/postgraduate-open-days.aspx

Applying for a postgraduate course:
http://www.dmu.ac.uk/study/postgraduate-study/entry-criteria-and-how-to-apply/entry-criteria-and-how-to-apply.aspx

Funding for postgraduate students
http://www.dmu.ac.uk/study/postgraduate-study/postgraduate-funding-2017-18/postgraduate-funding-2017-18.aspx

Read less
First established in the early 1950s, the MMet course has produced over 700 graduates, with many now working in senior positions within metallurgical companies across the globe. Read more

About the course

First established in the early 1950s, the MMet course has produced over 700 graduates, with many now working in senior positions within metallurgical companies across the globe.

You’ll receive an in-depth and up-to-date understanding of current developments in metallurgy and metallurgical engineering. You’ll learn the fundamentals of thermodynamics, structure and mechanical behaviour. As well as the option to study the more advanced courses on engineering alloys, processing, modelling and performance in service.

Fully accredited by the IoM3 graduates will have the underpinning knowledge for later professional registration as a Chartered Engineer (CEng).

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Metals; Metallurgical Processing; Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development; Heat and Materials with Application; Advanced Materials Manufacturing; Deformation, Fracture and Fatigue; Research Project in an area of your choice.

Read less
This course is designed to respond to a growing shortage of workforce in mechanical engineering sectors. It intends to equip our students with relevant and up-to-date knowledge and skills for their engineering competencies and careers. Read more

Why take this course?

This course is designed to respond to a growing shortage of workforce in mechanical engineering sectors. It intends to equip our students with relevant and up-to-date knowledge and skills for their engineering competencies and careers. Students have a chance to broaden and deepen their knowledge in wide range of mechanical engineering subjects. This enables our students to undertake an advanced treatment of core mechanical engineering disciplines such as design and critical evaluation of structural integrity, computation fluid dynamics, advanced materials, energy and control systems.

What will I experience?

On this course you can:

Use simulation and modelling application software for virtual design and manufacturing
Utilise our strong links with companies and investigate real industrial problems to enhance your understanding of the profession
Tie in the topic of your individual project with one of our research groups and benefit from the expertise of our actively researching academics

What opportunities might it lead to?

This course has been accredited by the Institution of Mechanical Engineers (IMechE) and Institution of Engineering and Technology (IET), meeting the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). It will provide you with some of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng).

Here are some routes our graduates have pursued:

Design
Research and development
Product manufacture
Project management

Module Details

You will study several key topics that will help equip you to work as a mechanical engineer in a broad spectrum of mechanical engineering business activity management, research, design and development roles. You will also complete a four-month individual project tailored to your individual interests that can take place in our own laboratories or, by agreement, in industry.

Here are the units you will study:

Structural Integrity: Contemporary approaches are applied to the evaluation of mixed mode fracture and fatigue failure. Dynamic plastic responses of structures and the performance of composite structures are evaluated.

Industrial Control Systems: This unit covers mathematical representation of control system models is developed principally using Laplace transforms. System behaviour and simulation is analysed with practical case studies, leading to control system specifications.

Advanced Materials: This unit is designed to deal with a wide range of advanced materials for engineering applications. Teaching will address analytical and numerical methods to assess the strength, stiffness, toughness, non-linearity behaviours, vibration and failures of engineering materials for component and structure design.

Energy Systems: This unit is designed to study the principles and techniques of operation of thermodynamics and combustion systems, as well as the provision and management of energy. The current and future requirements and trends in energy production and consumption are addressed.

Structural Application of Finite Elements: The use of finite element analysis techniques and software applied to structural problems is developed. Modelling with both isotropic and orthotropic materials is investigated, as well as such topics as cracking in dissimilar materials and composite laminates.

Computational Fluid Dynamics: A practical case study analysis approach is used for model formulation and CFD simulation. Fundamental principles are used to appraise the results of CFD analysis of problems with industrial applications.

Individual Project: A strong feature of the course is the individual project, which comprises a third of the course. We encourage students to undertake projects in industrial companies, but we can also use our extensive resources and staff skills to undertake projects within the University.

Programme Assessment

You will be taught through a mixture of lectures, seminars, tutorials (personal and academic), laboratory sessions and project work. The course has a strong practical emphasis with a significant amount of your time spent our laboratories. We pride ourselves on working at the leading-edge of technology and learning practices.

A range of assessment methods encourages a deeper understanding of engineering and allows you to develop your skills. Here’s how we assess your work:

Written examinations
Coursework
Laboratory-based project work
A major individual project/dissertation

Student Destinations

The demand for more highly skilled mechanical engineers is always present and it is generally accepted that there is a current shortage of engineers.

When you graduate from this course you could find employment in a wide range of mechanical engineering-based careers, such as design, research and development and manufacturing. You could work for a large company, in the Armed Forces or in one of the many small companies within this sector. You could even start your own specialist company.

Roles our graduates have taken on include:

Mechanical engineer
Product design engineer
Aerospace engineer
Application engineer

Read less
IN BRIEF. A specialist qualification that is recognised by industry experts. Taught by distance e-learning so you can fit in study around your work. Read more

IN BRIEF:

  • A specialist qualification that is recognised by industry experts
  • Taught by distance e-learning so you can fit in study around your work
  • The first course in the UK to specialise in combustion engineering at a commercial level
  • International students can apply

COURSE SUMMARY

Industrial Combustion Engineering is a significant market sector which functions between the electrical and mechanical disciplines. A competent engineer needs to have a knowledge and understanding of thermodynamics, fluid dynamics, and the chemistry of combustion and process engineering.

A formal training and qualification route for industrial combustion engineers does not currently exist. The result of this is a world-wide shortage of skilled competent combustion engineers.

This course has been designed to meet this shortage, and is suitable for graduates and professional engineers who wish to gain specialist knowledge and skills in the field of commercial and industrial combustion engineering, or who wish to formalise and progress in their current profession.

COURSE DETAILS

This course aims:

  • To provide engineers and industrial practitioners with specialist skills and advanced knowledge to work within industrial and commercial combustion engineering processes.
  • To develop engineers and scientists with a systematic and a critical awareness of burner technology and its utilisation within industrial and commercial processes (oil and gas).
  • To provide comprehensive knowledge and a critical understanding of gas safety standards and its application to industrial/commercial combustion processes.
  • To develop the student professionally to make informed decisions on the design, development, installation and commissioning of industrial and commercial combustion systems.

There are three qualifications available, each taking a total of one year. To attain the competent engineer certification you will need to complete a PgDip.

TEACHING

Teaching is delivered online by e-learning.

You will required to attend the University of Salford for a two week period for laboratory teaching and assessment.

ASSESSMENT

You will be assessed through:

  • Coursework 40%
  • Examinations 60%

Plus dissertation

CAREER PROSPECTS

You will be able to enter or progress in careers in the designing, commissioning, servicing and maintaining of industrial or commercial combustion equipment.

Examples of jobs you could apply for with this qualification might be Service Engineer, Commissioning Engineer, Design Engineer.

LINKS WITH INDUSTRY

This course was designed in conjunction with Advanced Combustion Engineering Ltd (ACE) a regional burner manufacturing company.

It was their concerns of the lack of formalised training in the commercial combustion engineering sector that they approached the university to devise a programme that would meets these concerns.



Read less
NOTE Are you a student from outside the EU? If you are an international student we have designed a version of this award especially for you! It is called the Extended International Master in Mechanical Engineering. Read more
NOTE Are you a student from outside the EU? If you are an international student we have designed a version of this award especially for you! It is called the Extended International Master in Mechanical Engineering. It includes an extra semester of preliminary study to prepare you for postgraduate learning in the UK. We strongly recommend that all international students take this option as it is proven to improve your chances of success. Take a look at this alternative course here.

Engineering is a major wealth creator for the UK and many other economies worldwide. Highly qualified engineers command a high salary and are much sought after. This course will provide you with significant skills in the major engineering functions allowing you to work in a senior technical or project management role within industry.

Course content

The course consists of 8 taught modules plus a major personal project leading to a written thesis. The taught modules cover the broad range of activities involved in designing and validating new products and machinery. You will study topics such as solid and surface modelling, rapid prototyping, Finite Element Analysis, advanced materials and thermodynamics. The subject area of your final thesis can be selected to suit your own aspirations and interests. You will be assigned a supervisor with whom you will work closely to develop an academically challenging portfolio of work.

Core modules are:
-Research Methods & Project Management
-Design Technologies for Masters
-Energy Management
-Structural Integrity
-Advanced Engineering Materials
-Applied Structural Integrity
-MSc

Project Option Modules are:
-Industrial Robotics & Control
-Control System
-Sustainable Design & Manufacture
-Industrial Placement

This course can be completed within 1 year. However this timescale is dependent on students starting the course in September, passing all modules, undertaking their project during the summer semester and experiencing no other delays (such as health issues). Many students choose to delay their project start and enjoy a well-deserved summer break to ‘re-charge their batteries’ which also has academic benefits. In this case a more realistic duration is 15 months.

Accreditation

Accredited by the Institute of Mechanical Engineers and the Institution of Engineering and Technology on behalf of the Engineering Council (partial CEng). The MSc will meet, in part, the exemplifying academic benchmark requirements for registration as a Chartered Engineer. Accredited MSc graduates who also have a BEng(Hons) accredited for CEng will be able to show that they have satisfied the educational base for CEng registration.

Employment opportunities

Upon graduation you will be ideally placed to work in a manufacturing or engineering company at a senior level working towards Chartered (CEng) status. If you prefer the course also gives a good grounding in research techniques which could allow you to continue your personal research interests to PhD level.

Read less
As a graduate mechanical engineer, this MSc course will provide you with an advanced qualification which will enhance your career prospects and extend and update your skills and knowledge. Read more
As a graduate mechanical engineer, this MSc course will provide you with an advanced qualification which will enhance your career prospects and extend and update your skills and knowledge. The course actively encourages the understanding and practice of inter-disciplinary systems engineering thinking that brings together mechanical engineering subjects in a way that reflects the needs of industrial and academic problem solving.

The close integration of the case study and project will allow you to explore, in-depth, a chosen topic related to the course. This provides you with an individually tailored programme to meet your needs in a flexible yet focused manner, with the project seen as being the key opportunity to acquire and exercise leading edge mechanical engineering knowledge. You will be given the opportunity to show originality in applying the knowledge you acquire, and will develop an appreciation of how the boundaries of knowledge are advanced through research. You will be trained to deal with complex issues both systematically and creatively, and will be given the opportunity and encouragement to demonstrate initiative and innovation in solving challenging problems and in designing new components and systems.

The close involvement with industry, particularly at the project stage, ensures that the experience the course provides has both relevance and meaning. Lecturers delivering the modules are working with some of the world's most renowned engineering companies. Partners include Airbus, BAe Systems, Bosch, Tata Steel, Daimler, EADS, Fiat, Hewlett-Packard, IBM, Messier-Dowty, Network Rail, TWI, Parametric Technology, Physical Acoustics Ltd, Renault, Renishaw, Rolls-Royce, SAP, Siemens, Silicon Graphics, Stile Bertone, The Highways Agency, TRL, Microchip, and WS Atkins.

This degree course will prepare you for entry into careers in research or industry. In addition to technical skills, you will acquire professional skills such effective communication with technical, management and non-technical audiences, project planning, evaluation and prioritisation.

Structure

This is a one year full time MSc course beginning with a taught section worth 120 credits. The Autumn and Spring semesters utilise taught and research project based material to enable you to progress from a typical bachelor graduate standard at entry to the master’s level. The eight taught optional modules are split between these semesters to provide eighty credits of masters level study. Two twenty credit Case Study modules form both group (semester 1) and individual (semester 2) activities. This prepares you for the third section of the course where you will use your advanced skills to complete an in-depth project and prepare a dissertation in the field of Advanced Mechanical Engineering. The project and dissertation stage of your course are worth a further 60 credits.

A 10-credit module typically represents 100 hours of study in total. This may involve 24–36 hours of contact time with teaching staff. The remaining hours are intended to be for private study, coursework, revision and assessment: all students are expected to spend a significant amount of time (typically 20 hours each week) studying independently. You must keep your personal tutor, project supervisor and the Teaching Office informed of any circumstances or illnesses that might affect your capacity to attend teaching or undertake assessment.

Core modules:

Advanced Mechanical Engineering Group Research Study
Advanced Mechanical Engineering Case Study
Advanced Mechanical Engineering Project

Optional modules:

Measurement Systems
Manufacturing Informatics
Fundamentals of Nanomechanics
Tribology
Artificial Intelligence
Control
Quality and Reliability
Risk and Hazard Management in the Energy Sector
Condition Monitoring, Systems Modelling and Forecasting
Management in Industry
Thermodynamics and Heat Transfer 2
Energy Management
Advanced Robotics

Teaching

A wide range of teaching styles and mechanisms will be used to deliver the diverse material forming the curriculum of the programme. You will be expected to attend lectures and participate in tutorial classes. All students must complete 120 credits in Stage 1 in order to progress to the dissertation, for which they are allocated a supervisor from among the teaching staff. Dissertation topics are normally chosen from a range of project titles proposed by academic staff, usually in areas of current research interest, although you are encouraged to put forward your own project ideas.

Assessment

Achievement of learning outcomes in the classroom based modules is assessed by University examinations set in January and May/June. Predominantly examination-based assessment will be deployed in eight modules (80 credits) taken in Stage 1 of the programme. The balance between examination and coursework depends upon the modules selected, with the equivalent of up to six credits being available in coursework elements in individual modules, in addition to two double module (40-credit) case studies.

Award of an MSc requires successful completion of Stage 2, the Dissertation, with a mark of 50% or higher. Candidates achieving a 70% average may be awarded a Distinction. Candidates achieving a 60% average may be awarded a Merit. Candidates failing to qualify for an MSc may be awarded a Postgraduate Diploma of Higher Education for 120 credits in Stage 1. Candidates failing to complete the 120 credits required for Stage 1 may still be eligible for the award of a Postgraduate Certificate of Higher Education for the achievement of at least 60 credits.

Career prospects

The course provides master’s level training to the standard necessary to practice as a chartered professional mechanical engineer. When you graduate you will be equipped to apply for management level roles across a broad spectrum of mechanical and related engineering fields. The material presented during the course will provide an excellent foundation for any career in mechanical engineering or related discipline.

Read less
Your programme of study. The energy industry has historically provided immense rewards and immense challenges in terms of infrastructure development in very challenging environments. Read more

Your programme of study

The energy industry has historically provided immense rewards and immense challenges in terms of infrastructure development in very challenging environments. Over time there have been many learning points as a result of process which did not address the challenge sufficiently resulting in new standards of safety, assessing risk and managing the challenges presented in mineral extraction. The industry has come a long way since its inception in Aberdeen in the 1970s and globally and University of Aberdeen has acquired this knowledge and research to work with industry and train the next Safety and Reliability Engineers to continuously improve safety. This programme is highly regarded from a well known provider in the industry. You visit industry and receive technical lectures with practical sessions to provide further awareness of the responsibility involved in the energy industry.

The programme is ideal if you are from an engineering, physics or mathematics background but it is also relevant to you if you studied stress analysis and thermodynamics with experience from the industry. The added value of this programme is that you can apply the discipline to other industries such as nuclear, defence, transport, aerospace, manufacturing and process industries, making you more employable and allowing wider scope for career options at graduation.

Courses listed for the programme

Semester 1

  • Fundamental Safety Engineering, and Risk Management Concepts
  • Statistics and Probability for Safety, Reliability and Quality
  • Fire and Explosion Engineering
  • Subsea Integrity

Semester 2

  • Advanced Methods for Risk and Reliability Assessments
  • Applied Risk Analysis and Management
  • Process Design, Layout and Materials
  • Human Factors Engineering

Semester 3

  • Safety Engineering Project

Find out more detail by visiting the programme web page

or on campus delivery:

Why study at Aberdeen?

  • This is a highly regarded programme by the industry which is informed by the energy industry in Aberdeen city
  • Aberdeen is at the heart of the European and world oil and gas industry with many multinational FTS 100 companies located in the city
  • This is a world class programme which informs the Lloyds Register Foundation Centre for Safety and Reliability Engineering
  • You are taught by industry professionals with worldwide industry experience

Where you study

  • Online
  • Full Time or Part Time
  • 5 Months or 27 Months
  • September or January start

*• There is an online programme available from University of Aberdeen

International Student Fees 2017/2018

Find out about fees:

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the latest opportunities page

Living in Aberdeen

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen and living costs

Other engineering disciplines you may be interested in:



Read less
Your programme of study. You can study this programme either full time on campus, part time, or online to fit flexibly around work commitments. Read more

Your programme of study

You can study this programme either full time on campus, part time, or online to fit flexibly around work commitments.

Whilst Safety and Reliability Engineering allows you to apply your skills and knowledge to a wider range of industries, this programme is specifically for the oil and gas industry. It provides you with the knowledge to review reliability of engineering facilities, materials and products and legislative framework at the same time. Safety has always been of paramount concern in the oil and gas industry with a lot of learning and knowledge acquired since the oil industry growth of the 1970s. This knowledge has been scrutinised by University of Aberdeen and the industry to provide professional expertise to manage safety and reliability. Future challenges are being met to some extent by the advent of affordable sensors which manage difficult to reach places, but nonetheless require the knowledge and capabilities of professionals working in this discipline to ensure they are fit for purpose.

The MSc Safety Engineering for Oil & Gas programme provides training in safety engineering, reliability engineering, and loss prevention in the offshore, nuclear, transport, aerospace and process industries and more. Fully accredited by the Institution of Mechanical Engineers (IMechE), the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Institute of Highway Engineers (IHE) and the Chartered Institution of Highways & Transportation (CIHT).

Courses listed for the programme

Semester 1

  • Fundamental Safety Engineering and Risk Management Concepts
  • Statistics and Probability for Safety, Reliability, and Quality
  • Fire and Explosion Engineering
  • Offshore Oil and Gas Production Systems

Semester 2

  • Advanced Methods for Risk and Reliability Assessment
  • Applied Risk Analysis and Management
  • Process Design, Layout and Materials
  • Human Factors Engineering

Semester 3

  • Project

Find out more detail by visiting the programme web page

There is also on online delivery

Why study at Aberdeen?

  • The university is highly regarded within the oil and gas industry for continuous integration with industry needs and knowledge
  • You can study flexibly either part time or online
  • It is supported by the Lloyds Register and Advisory Board which in turn builds on the knowledge within the School of Engineering
  • We are ideally placed to provide this programme of study and support it with strong links to industry

Where you study

  • University of Aberdeen
  • Full time and part time
  • 12 Months or 24 Months
  • September start

There is also an Online delivery of this programme

International Student Fees 2017/2018

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Fees for Online delivery

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen and living costs 

Other engineering disciplines you may be interested in:



Read less
Your programme of study. The programme is delivered on. campus. full time. and online. part time to give you flexible study options. Read more

Your programme of study

The programme is delivered on campus full time and online part time to give you flexible study options. If you want to join the growing companies operating in the subsea industry in Aberdeen or internationally or set up your own company this programme will provide you with a high level of technical training

The Master of Science in Subsea Engineering seeks to prepare highly-trained, highly-qualified, business-aware graduates that can make an immediate impact in their chosen career, and who can address the need for key skills in the subsea industry. Subsea Engineering at the University of Aberdeen has a unique relationship with the subsea industry both locally and internationally, and the programme receives contributions from local industrial organisations in terms of relevant and up-to-the minute contributions to teaching, and support in the specification of group and individual projects.

Aberdeen is the heart of the European oil and gas industry, an international hub for companies engaged in Subsea Engineering. A degree from the University of Aberdeen puts you in a unique position to develop business links alongside of learning and developing international skills within the flexible, modular programme.

Courses listed for the Campus programme

Semester 1

  • Offshore Structures and Subsea Systems
  • Subsea Control
  • Subsea Integrity
  • Subsea Construction, Inspection and Maintenance

Semester 2

  • Pipelines and Soil Mechanics
  • Risers Systems and Hydrodynamics
  • Flow Assurance
  • Engineering Risk and Reliability Analysis

Semester 3

  • Subsea Engineering Individual Project

Courses for the Online Programme

Year 1

  • Offshore Structures and Subsea Systems
  • Subsea Construction, Inspection and Maintenance
  • Pipelines and Soil Mechanics
  • Engineering Risk and Reliability Analytics

Year 2

  • Subsea Control
  • Subsea Integrity
  • Risers Systems and Hydrodynamics
  • Flow Assurance

Year 3

  • Subsea Engineering Individual project

Find out more detail by visiting the programme web page

Online delivery

Why study at Aberdeen?

  • Aberdeen is a recognised hub and centre of excellence in Subsea, as Europe's energy capital and 'World Energy City'
  • The programme is accredited by the Institute of Marine Engineering, Science and Technology (MarEST) and Institution of Mechnical Engineers (IMechE). the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), The
  • Institute of Highway Engineers (IHE) and Chartered Institution of Highways and Transportation (CIHT)
  • We are able to draw upon knowledge and industry experience within the subsea sector on our doorstep to challenge you
  • The programme is very employable with graduates moving to CEO level

Where you study

  • University of Aberdeen
  • Full Time
  • September start

There is also an online delivery of this programme

  • Online
  • 5 Months 27, 30 Months
  • Part Time
  • September and January start

International Student Fees 2017/2018

Find out about fees for campus delivery:

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Find out about online fees

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen for Campus Study

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen and living costs 

Online delivery

Other engineering disciplines you may be interested in:



Read less
Our MSc in Electronic Engineering offers content that is different to many other similarly-titled courses. It equips you with a skill set that is in demand by industry worldwide, allowing you to maximise your employability by taking a course that is broad in scope but challenging in detail. Read more

About the course

Our MSc in Electronic Engineering offers content that is different to many other similarly-titled courses. It equips you with a skill set that is in demand by industry worldwide, allowing you to maximise your employability by taking a course that is broad in scope but challenging in detail.

Electronic Engineering provides a broad master’s-level study of some of the most important aspects of electronic engineering today. It builds on your undergraduate knowledge of core aspects of electronics, supported by a module in Engineering Business Environment and Energy Policies, which provides you with an understanding of the context of engineering in the early 21st Century.

The course embraces a number of themes in areas identified as being generally under-represented in many other courses, such as power electronics and electromagnetic compatibility, providing you with as wide a range of employment opportunities as possible – whether this is in industry or continuing in research at university.

The course has achieved accreditation by the Institution of Engineering and Technology (IET) to CEng level for the full five year period.

Reasons to study

• Accredited by the Institution of Engineering and Technology (IET) to CEng level
offering a streamlined route to professional registration

• Industry placement opportunity
you can chose to undertake a year-long work placement, gaining valuable experience to enhance your practical and professional skills further

• Graduate employability
Our graduates have gone on to work in a variety of specialist roles in diverse industries, including; embedded systems, electronic design and biomedical monitoring

• Access to superb professional facilities
such as general electronics and assembly, digital electronics and microprocessor engineering, power electronics, control systems and communications engineering

• Study a wide range of specialist modules
course content is regularly reviewed and modules have been specifically developed to address skills gaps in the industry

• Academic and research expertise
benefit from teaching by experienced academic and research-based staff, including those from DMU’s dedicated Centre for Electronic and Communications Engineering, who are actively involved in international leadership roles in the sector.Programme

Course Structure

First semester (September to January)

• Digital Signal Processing
• Physics of Semiconductor Devices
• Engineering Business Environment and Energy Policies
• Control and Instrumentation

Second semester (February to May)

• Embedded Systems
• Research Methods
• Electromagnetic Compatibility and Signal Integrity
• Power Electronics

Third semester (June to September)

This is a major research-based individual project

Optional placement
We offer a great opportunity to boost your career prospects through an optional one year placement as part of your postgraduate studies. We have a dedicated Placement Unit which will help you obtain this. Once on your placement you will be supported by your Visiting Tutor to ensure that you gain maximum benefit from the experience. Placements begin after the taught component of the course has been completed - usually around June - and last for one year. When you return from your work placement you will begin your dissertation.

Teaching and Assessment

Modules are delivered through a mixture of lectures, tutorials and laboratories. The methodology ensures a good balance between theory and practice so that real engineering problems are better understood, using strong theoretical and analytical knowledge translated into practical skills.

Contact and learning hours

You will normally attend 4 hours of timetabled taught sessions each week for each module undertaken during term time, for full time study this would be 16 hours per week during term time. You are expected to undertake around 212 further hours of independent study per 30 credit modules. Alternate study modes and entry points may change the timetabled session available, please contact us for details.

Industry Accreditation

he course is fully accredited by the Institution of Engineering and Technology (IET) which is one of the world’s leading professional societies for the engineering and technology community, with more than 150,000 members in 127 countries.

IET accreditation recognises the high standard of the course and confirms the relevance of its content. In order to achieve IET accreditation the course has had to reach a certain standard in areas such as the course structure, staffing, resourcing, quality assurance, student support and technical depth.

The benefits of an IET accredited course include increased opportunities, being looked on favourably by employers and completing the first step in your journey to achieving professional Chartered Engineer (CEng) status which can be applied for following a period of suitable industrial experience after graduation.

This degree has been accredited by IET under licence from the UK regulator, the Engineering Council. Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

Facilities

You will have flexible access to our laboratories and workshops which include: electrical and electronic experimental facilities in general electronics and assembly, digital electronics and microprocessor engineering, power electronics, control systems and communications engineering. Each area is equipped with the latest experimental equipment appropriate to the corresponding areas of study and research. An additional CAD design suite provides access to computing facilities with specialist electronics CAD tools including OrCAD and PSpice. A specialised area incorporating a spacious radio frequency reverberation chamber and Faraday cage allows for experimentation in radio frequency engineering and electromagnetics, while our digital design suite is equipped with the latest 8 and 32-bit embedded microprocessor platforms together with high-speed programmable logic development environments. Power generation and conversion, industrial process control and embedded drives are provided while our communications laboratory is additionally equipped for RF engineering.

To find out more

To learn more about this course and DMU, visit our website:
Postgraduate open days: http://www.dmu.ac.uk/study/postgraduate-study/open-evenings/postgraduate-open-days.aspx

Applying for a postgraduate course:
http://www.dmu.ac.uk/study/postgraduate-study/entry-criteria-and-how-to-apply/entry-criteria-and-how-to-apply.aspx

Funding for postgraduate students:
http://www.dmu.ac.uk/study/postgraduate-study/postgraduate-funding-2017-18/postgraduate-funding-2017-18.aspx

Read less
Your programme of study. Renewable energy engineering is in high demand globally as we find alternate methods of energy harvesting to meet our future energy needs and future proof our reliance on hydrocarbons as much as it is possible to do. Read more

Your programme of study

Renewable energy engineering is in high demand globally as we find alternate methods of energy harvesting to meet our future energy needs and future proof our reliance on hydrocarbons as much as it is possible to do. Considerable innovation and improvements are continuous within this field as it is by no means at a stage where society can rely on it to fuel all needs. The sector is interdisciplinary and this programme provides you with a wide range of very useful skills and knowledge to problem solve and progress current renewables and work towards innovation whether that is in a renewables company or as a start up.

You study electrical and electronic engineering pertinent to smart grid, sensing energy use, developing energy harvesting techniques, and renewable energy exchange, plus ability to harvest energy from all of our natural resources including wind, solar, hydro, marine, geothermal, biomass and other newly developing areas.Renewables is definitely an employable sector as governments are now challenged by finite resources coming from traditional areas, climate change and societal concerns about how we harvest energy in the future and our ability to survive climatic issues, population increase and manage work and life.

Courses listed for the programme

Semester 1

  • Electrical Systems for Renewable Energy
  • Renewable Energy 1 (Solar and Geothermal)
  • Renewable Energy 2 (Biomass)
  • Fundamental Concepts in Safety Engineering

Semester 2

  • Renewable Energy 3 (Wind, Marine and Hydro)
  • Energy Conversion and Storage
  • Renewable Energy Integration to Grid
  • Legislation, Planning and Economics

Semester 3

  • Project

Find out more detail by visiting the programme web page

or online delivery

Why study at Aberdeen?

  • You study with industry professionals and industry lead projects to encourage and challenge you in practical application
  • The full supply of energy is covered in the programme from the initial harvesting to the conversion methods required to link to grid
  • You can study your degree at University of Aberdeen or online to fit flexibly with your needs
  • You learn within a lab setting with industry visits and events in a global sector community

Where you study

  • University of Aberdeen
  • 12 Months Full Time
  • September start

• Online option available

International Student Fees 2017/2018

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen and living costs 

Other engineering disciplines you may be interested in:



Read less
Mechanical engineers are both generalists and specialists, bringing broad expertise and specialised mastery to their roles as project managers, leaders and innovators. Read more

Mechanical engineers are both generalists and specialists, bringing broad expertise and specialised mastery to their roles as project managers, leaders and innovators. As a student of GCU's MSc Mechanical Engineering, you'll continue in this tradition. The programme is designed to expand your core knowledge of the discipline while enhancing your skills as a specialist in either design or manufacture.

The programme was developed according to the UK Engineering Council's benchmark requirements for professional engineering, ensuring you'll enter the workforce with the relevant capabilities that employers value. It is also accredited by the Institution of Mechanical Engineers (IMechE). Furthermore, our industrial advisory board offers strong connections to industry.

GCU's mechanical engineering department contributes to important research in the discipline, investigating topics like materials and manufacturing, finite element analysis, computer-aided design and manufacture, and machine condition monitoring.

The MSc Mechanical Engineering curriculum encourages you to develop as a professional as well as an engineer.

  • Build your interpersonal skills to succeed as a team member and manager
  • Explore topics such as project planning and methodology, strategy and innovation, and computer-aided engineering
  • Practise managing resources and meeting project objectives
  • Choose from two options for specialisation: Design or Manufacture

When you study engineering at GCU, you'll join a welcoming community of learners and professionals. You'll find classmates and colleagues who are creative and entrepreneurial, committed to using their expertise to make a positive impact and advance the common good.

What you will study

The programme offers two specialist study options; Design and Manufacture. These options share a number of common modules that directly reflect the activities of a professional mechanical engineer. Students complete eight taught modules - four in trimester A and four in trimester B; and an MSc dissertation in trimester C.

  • Project Planning and Methodology
  • Strategy and Innovation
  • Advanced Computer-Aided Engineering
  • Condition Monitoring
  • Project
  • Specialist Modules (Design)
  • Specialist Modules (Manufacture)

Assessment methods

The taught modules are either assessed by coursework only or a combination of coursework and examination. In the later case the final mark is determined by weighted average of the two elements. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Professional accreditation

The development of these Masters options is in direct response to the specification of benchmark requirements for professional competence by the UK's Engineering Council (UK-SPEC). This programme is accredited by the Institution of Mechanical Engineers (IMechE).

Why choose this programme?

The MSc in Mechanical Engineering has very strong industrial links through its industry advisory board. The school participates in many research activities within the area of mechanical engineering. This includes; advanced materials and manufacturing processes, finite element analysts, computer-aided design and manufacture and machine condition monitoring.

HM Forces

In partnership with HM Forces, GCU has identified this programme is being particularly suited to military and ex-military men and women. Visit the HM Forces Careers Zone for more information on the services we provide.

Graduate prospects

Our graduates are appreciated by employers for their career-focused attitudes and socially driven perspectives. With skilled engineers in high demand, you can expect excellent job prospects in the field.

Graduates of the MSc Mechanical Engineering find employment in the oil and gas industry, defence, computer-aided engineering and building. They also work in mechanical design engineering, project engineering, manufacturing engineering and engineering sales.



Read less

Show 10 15 30 per page



Cookie Policy    X