• Birmingham City University Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Northumbria University Featured Masters Courses
  • Cardiff University Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • University of Surrey Featured Masters Courses
  • University of Northampton Featured Masters Courses
London Metropolitan University Featured Masters Courses
University College Cork Featured Masters Courses
Cass Business School Featured Masters Courses
Queen Mary University of London Featured Masters Courses
University of Bath Featured Masters Courses
United Kingdom ×
0 miles
Engineering×

Masters Degrees in Electromechanical Engineering, United Kingdom

We have 9 Masters Degrees in Electromechanical Engineering, United Kingdom

  • Engineering×
  • Electromechanical Engineering×
  • United Kingdom ×
  • clear all
Showing 1 to 9 of 9
Order by 
This is an MSc course in Embedded Systems with contributions from the fields of mechatronics and robotics. Embedded systems are microprocessor-based systems within a larger mechanical or electrical system that performs a dedicated function or task. Read more
This is an MSc course in Embedded Systems with contributions from the fields of mechatronics and robotics.

Embedded systems are microprocessor-based systems within a larger mechanical or electrical system that performs a dedicated function or task. They encompass a wide variety of products ranging from small mobile phones to large process automation installations. A practicing engineer in the field of embedded systems needs to have a specialised expertise in more than one of the engineering subjects of this multi-discipline subject.

Our MSc is tailored to provide you with advanced learning in microprocessor systems that are at the heart of embedded systems, with additional contributions from the fields of mechatronics and robotics. This approach reflects the needs of the industry and is well supported by the range in expertise we have in our Department.

The Department of Engineering and Design covers the full gamete of teaching in electronic, telecommunication and computer networks engineering as well as mechanical engineering and product design.

Our academics are a cohesive group of highly skilled lecturers, practitioners and researchers. You'll benefit from your choice of supervisors to support a wide range of modern and multi-discipline Masters-level projects. Our teaching is supported by well-equipped laboratory workshops, using mostly the latest hardware and software available in universities.

Modules

In each of the semesters 1 and 2 you will be required to take two core and one optional module from the lists below:

Semester 1:

•Robotics (20 credits)
• Microprocessors and Control (20 credits)

Optional modules (Semester 1):

• Pattern recognition and machine learning (20 credits)
• Technical, research and professional skills (20 credits)
• Advanced Instrumentation and Design (20 credits)
• Electrical Energy Converters and Drives (20 credits)

Semester 2:

• Digital Signal Processing and Real Time Systems (20 credits)
• Mechatronics and Embedded System Design (20 credits)

Optional modules (Semester 2):

• Electromechanical systems and manufacturing technology (20 credits)
• Technology evaluation and commercialisation (20 credits)
• Cloud Computing (20 credits)
• E-Business Applications (20 credits)

Semester 3

•MSc project (60 credits)

Professional links

The School of Engineering at LSBU has a strong culture of research, extensive research links with industry through consultancy works and Knowledge Transfer Partnerships (KTPs), and teaching content is closely related to the latest research findings in the field.

History and expertise

A strong research tradition and our industrial links has helped shaped the course design, content selection, course delivery and project supervision.

The Department of Engineering and Design has a strong Mechatronics, Robotics and Non-destructive testing research group with a wide national and international profile. This is in addition to excellent research in many areas of mechanical engineering, electrical engineering, product design, computer network and telecommunications engineering.

Employability

The course has been designed to help to meet the needs of industry. How much your employability will increase, will depend on your background and the personal contribution you make to your development whilst studying on the course.

Benefits for new graduates

If you are a new graduate in electronic or computer engineering then you benefit from the further advanced topics presented. You'll get an opportunity to cut your teeth on a challenging MSc Project, which will demonstrate your abilities to the potential employers. Alternatively, you could also pursue PhD studies after completing the course.

Benefits of returning to University

If you are returning to University after a period of working in industry, then you'll be able to update yourself with the recent technological progress in the field. You'll gain confidence in your ability to perform at your best and stand a better chance to seek challenging work opportunities. If you are already working in the field, the MSc qualification will enhance your status which will may help with your promotion.

Employment links

We are continually developing links with employers who are interested to provide internship to our students . Examples of this can include small VHDL and DSP designs, ARM based designs, industrial design or correlation research. These projects can be performed as part of the curriculum or as part of a research project.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

• Direct engagement from employers who come in to interview and talk to students
• Job Shop and on-campus recruitment agencies to help your job search
• Mentoring and work shadowing schemes.

Read less
Our MSc in Electronic Engineering offers content that is different to many other similarly-titled courses. It equips you with a skill set that is in demand by industry worldwide, allowing you to maximise your employability by taking a course that is broad in scope but challenging in detail. Read more

About the course

Our MSc in Electronic Engineering offers content that is different to many other similarly-titled courses. It equips you with a skill set that is in demand by industry worldwide, allowing you to maximise your employability by taking a course that is broad in scope but challenging in detail.

Electronic Engineering provides a broad master’s-level study of some of the most important aspects of electronic engineering today. It builds on your undergraduate knowledge of core aspects of electronics, supported by a module in Engineering Business Environment and Energy Policies, which provides you with an understanding of the context of engineering in the early 21st Century.

The course embraces a number of themes in areas identified as being generally under-represented in many other courses, such as power electronics and electromagnetic compatibility, providing you with as wide a range of employment opportunities as possible – whether this is in industry or continuing in research at university.

The course has achieved accreditation by the Institution of Engineering and Technology (IET) to CEng level for the full five year period.

Reasons to study

• Accredited by the Institution of Engineering and Technology (IET) to CEng level
offering a streamlined route to professional registration

• Industry placement opportunity
you can chose to undertake a year-long work placement, gaining valuable experience to enhance your practical and professional skills further

• Graduate employability
Our graduates have gone on to work in a variety of specialist roles in diverse industries, including; embedded systems, electronic design and biomedical monitoring

• Access to superb professional facilities
such as general electronics and assembly, digital electronics and microprocessor engineering, power electronics, control systems and communications engineering

• Study a wide range of specialist modules
course content is regularly reviewed and modules have been specifically developed to address skills gaps in the industry

• Academic and research expertise
benefit from teaching by experienced academic and research-based staff, including those from DMU’s dedicated Centre for Electronic and Communications Engineering, who are actively involved in international leadership roles in the sector.Programme

Course Structure

First semester (September to January)

• Digital Signal Processing
• Physics of Semiconductor Devices
• Engineering Business Environment and Energy Policies
• Control and Instrumentation

Second semester (February to May)

• Embedded Systems
• Research Methods
• Electromagnetic Compatibility and Signal Integrity
• Power Electronics

Third semester (June to September)

This is a major research-based individual project

Optional placement
We offer a great opportunity to boost your career prospects through an optional one year placement as part of your postgraduate studies. We have a dedicated Placement Unit which will help you obtain this. Once on your placement you will be supported by your Visiting Tutor to ensure that you gain maximum benefit from the experience. Placements begin after the taught component of the course has been completed - usually around June - and last for one year. When you return from your work placement you will begin your dissertation.

Teaching and Assessment

Modules are delivered through a mixture of lectures, tutorials and laboratories. The methodology ensures a good balance between theory and practice so that real engineering problems are better understood, using strong theoretical and analytical knowledge translated into practical skills.

Contact and learning hours

You will normally attend 4 hours of timetabled taught sessions each week for each module undertaken during term time, for full time study this would be 16 hours per week during term time. You are expected to undertake around 212 further hours of independent study per 30 credit modules. Alternate study modes and entry points may change the timetabled session available, please contact us for details.

Industry Accreditation

he course is fully accredited by the Institution of Engineering and Technology (IET) which is one of the world’s leading professional societies for the engineering and technology community, with more than 150,000 members in 127 countries.

IET accreditation recognises the high standard of the course and confirms the relevance of its content. In order to achieve IET accreditation the course has had to reach a certain standard in areas such as the course structure, staffing, resourcing, quality assurance, student support and technical depth.

The benefits of an IET accredited course include increased opportunities, being looked on favourably by employers and completing the first step in your journey to achieving professional Chartered Engineer (CEng) status which can be applied for following a period of suitable industrial experience after graduation.

This degree has been accredited by IET under licence from the UK regulator, the Engineering Council. Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

Facilities

You will have flexible access to our laboratories and workshops which include: electrical and electronic experimental facilities in general electronics and assembly, digital electronics and microprocessor engineering, power electronics, control systems and communications engineering. Each area is equipped with the latest experimental equipment appropriate to the corresponding areas of study and research. An additional CAD design suite provides access to computing facilities with specialist electronics CAD tools including OrCAD and PSpice. A specialised area incorporating a spacious radio frequency reverberation chamber and Faraday cage allows for experimentation in radio frequency engineering and electromagnetics, while our digital design suite is equipped with the latest 8 and 32-bit embedded microprocessor platforms together with high-speed programmable logic development environments. Power generation and conversion, industrial process control and embedded drives are provided while our communications laboratory is additionally equipped for RF engineering.

To find out more

To learn more about this course and DMU, visit our website:
Postgraduate open days: http://www.dmu.ac.uk/study/postgraduate-study/open-evenings/postgraduate-open-days.aspx

Applying for a postgraduate course:
http://www.dmu.ac.uk/study/postgraduate-study/entry-criteria-and-how-to-apply/entry-criteria-and-how-to-apply.aspx

Funding for postgraduate students:
http://www.dmu.ac.uk/study/postgraduate-study/postgraduate-funding-2017-18/postgraduate-funding-2017-18.aspx

Read less
The Mechanical Engineering MSc builds on your undergraduate knowledge base through a number of advanced modules in core subject areas. Read more

About the course

The Mechanical Engineering MSc builds on your undergraduate knowledge base through a number of advanced modules in core subject areas. These are supported by modules in business and electromechanics, providing you with an insight of the engineering business environment and broadening your understanding of other engineering disciplines.

The course provides you with an understanding of the methodology used in research and an awareness of the numerical techniques underpinning the tools employed in mechanical and thermal analysis.

Topicality and direct application to the needs of society are also catered for, providing you with an understanding of the environmental impact of human activities and energy consumption and the role of the mechanical engineer in seeking appropriate solutions.

Course Structure

Modules

First semester (September to January)

• Electromechanics
• Engineering Business Environment and Energy Studies
• Numerical Techniques in Engineering
• Advanced Thermodynamics and Heat Transfer

Second semester (February to May)

• Advanced Solid Mechanics
• Research Methods
• Engineering Systems Dynamics and Control
• Advanced Materials and Design

Third semester (June to September)

• This is a major research-based individual project

Optional placement
We offer a great opportunity to boost your career prospects through an optional one year placement as part of your postgraduate studies. We have a dedicated Placement Unit which will help you obtain this. Once on your placement you will be supported by your Visiting Tutor to ensure that you gain maximum benefit from the experience. Placements begin after the taught component of the course has been completed - usually around June - and last for one year. When you return from your work placement you will begin your dissertation.

Teaching and assessment

The modules are delivered through a mixture of lectures, tutorials and laboratories. This ensures a good balance between theory and practice so that real engineering problems are better understood through an underpinning of strong theoretical and analytical knowledge translated into practical skills.

Contact and learning hours

You will normally attend four hours of timetabled taught sessions each week for each module undertaken during term time; for full-time study this would be 16 hours per week during term time. You can expect to also undertake around 24 further hours of independent study and assignments as required per week.

Academic expertise

Mechanical Engineering teaching staff are active in several important research areas, including: Combustion modelling and energy conversion research using both experimental and CFD methods to analyse efficiencies and emissions of energy systems Computational rheology, non- Newtonian biofluid simulations, viscoelastic effects on lubrication thin film flows Surface engineering via surface modification of materials for enhancement of mechanical, tribological and chemical properties.

To find out more

To learn more about this course and DMU, visit our website:
Postgraduate open days: http://www.dmu.ac.uk/study/postgraduate-study/open-evenings/postgraduate-open-days.aspx

Applying for a postgraduate course:
http://www.dmu.ac.uk/study/postgraduate-study/entry-criteria-and-how-to-apply/entry-criteria-and-how-to-apply.aspx

Funding for postgraduate students
http://www.dmu.ac.uk/study/postgraduate-study/postgraduate-funding-2017-18/postgraduate-funding-2017-18.aspx

Read less
If you are a graduate in engineering or a related science subject who wishes to progress to a technical project management position, then this is the course for you. Read more

If you are a graduate in engineering or a related science subject who wishes to progress to a technical project management position, then this is the course for you. It has been developed in consultation with industry and is supported by our internationally renowned expert staff and the state of the art facilities based in our Centre for Precision Technologies.

Our modern facilities include an impressive range of professionally equipped laboratories for control, electrical, electronic and communications projects. There are also a computer numerical control (CNC) machine tool facility and metrology laboratory for aspiring engineers wishing to undertake projects related to manufacturing control. In addition, our computing laboratories are equipped with industry standard software for measurement and control and for computer aided engineering applications - all with high speed internet access.

With our support you will develop the practical skills and expert knowledge required to succeed in roles in technical design, development and project management in the areas of controls systems and instrumentation; improving your technical effectiveness and preparing you for roles in management.

Postgraduate Study Fairs

Come along to our Postgraduate Study Fair, Thursday 21st June, 10am – 2pm and discover all your postgraduate study and research options.

Our award-winning academic staff will be on hand to chat about all our postgraduate study and research options, flexible teaching and how postgraduate study can help you to advance your career or prepare for a career change.

To find out more and to book visit https://www.hud.ac.uk/open-days/postgraduate/



Read less
Course description. Enhance your knowledge and skills in the rapidly developing field of additive manufacturing and advanced manufacturing technologies. Read more

Course description

Enhance your knowledge and skills in the rapidly developing field of additive manufacturing and advanced manufacturing technologies.

This course has been developed to meet the demands of industry and will expose you to cutting-edge manufacturing techniques and applications.

There are specialist modules in additive manufacturing, state-of-the-art manufacturing technologies, materials and a broad range of modules in advanced mechanical engineering.

You will undertake an industry-focused research project on additive manufacturing, working with both commercial and bespoke manufacturing technologies using high-performance materials.

Further optional modules are available, allowing you to customise the course based on your interests or career aspirations.

Core modules

  • Additive Manufacturing – Principles and Applications
  • Additive Manufacturing – Principles and Applications 2
  • Individual Additive Manufacturing Research Project
  • Information Skills for Engineers

Teaching

  • Lectures
  • Tutorials and example classes
  • Interactive workshops
  • Group presentation sessions
  • Individual research project

Assessment

  • Exams
  • Essays
  • Oral and poster presentations
  • Research project report


Read less
The Placement Course for Professional Engineers in the Construction Infrastructure and Oil & Gas sectors aims to train engineers to become managers in Construction and Oil & Gas Companies who are able to manage business processes and construction site procedures. Read more

The Placement Course for Professional Engineers in the Construction Infrastructure and Oil & Gas sectors aims to train engineers to become managers in Construction and Oil & Gas Companies who are able to manage business processes and construction site procedures.

The Placement Course for Professional Engineers Construction and Oil & Gas Sectors is accredited by CPD Certification Service in London. Accredited CPD training means the learning activity has reached the required Professional Development standards and benchmarks. The learning value has been scrutinised to ensure integrity and quality. The CPD Certification Service provides recognised independent CPD accreditation compatible with global CPD requirements.

The Course is delivered with the support of Multinational Companies operating worldwide

Dirextra has more than 2,300 alumni engineers who have worked on the construction of major infrastructures around the world. There is no growth without engineers.

6 months (1000 hours) of training on a Construction or Oil & Gas Site. Accommodation will be provided by the host company. (not applicable to positions in the office headquarters).

Kick-start your career with a programme in Construction and Oil & Gas. Dirextra is a leader in the field of Construction Infrastructure, Oil & Gas and Engineering education.

EMPLOYMENT OPPORTUNITIES

The programme is supported by large Oil & Gas and Construction Infrastructure Companies operating all over the world aiming to hire young engineers.

100% successful placement in previous cohorts.

Next editions

28th cohort will start in Manchester on 26 Feb 2018

29th cohort will start in Rome on 26 Sep 2018

Fees and Financing

Tuition fees £ 12,000. (pounds).

Payment can be made in the following ways:

-in total at the time of registration (discount of £ 1,000 (pounds)

-in 4 installments

The Construction and Oil & Gas Companies sponsoring our Programme grant Scholarships to cover part of Tuition Fees.

6 scholarship up to 40% and 4 scholarship up to 30%.

Scholarships are limited students who register in advance will receive a higher amount based on selection performance.

Selection will be determined by qualifications and psychometric tests and interviews.



Read less
Your programme of study. Read more

Your programme of study

Have you ever wanted to invent something mechanical, prevent environmental damage to a building from floods, fire, explosions, landslides and other natural disasters, understand risks and reliability across buildings, renewables, and other areas? Do you want to improve quality of life across environmental remediation, farming, smart grid, green technology, food production, housing, transportation, safety, security, healthcare and water? Do you find it fascinating to try to make things work from what you have available? There will be plenty of major challenges to get involved with in the coming years crossing over into Nano technologies, advanced materials, electronic printing, grapheme technologies, wearable's, 3d printing, renewables and recycling and biotechnologies. Technology now means that you can design and engineer from anywhere in the world, including your home. Advanced Mechanical Engineering looks at computational mechanics, response to materials and reliability engineering. The Victorians set up some of the most advanced mechanical engineering of our times and in many ways they were the biggest mechanical engineering innovators ever.

This programme specialises in mechanical engineering so you are becoming proficient in designing anything that has background moving parts to allow it to work such as engines, motor driven devices and the effects of nature on mechanical objects and their ability to perform. You also look at how material composition can alter performance issues and provide new innovative methods to solve challenges in every day life and natural and other risks to machinery in all situations.  Your employment options are very varied, you may want to work within consumer goods to design and improve everyday objects like white goods, or you may like to be involved in very large scale hydro electric and power driving machinery in energy , manufacturing or large scale developments, or you may decide to get involved in innovation and enterprise yourself.

Courses listed for the programme

SEMESTER 1

  • Compulsory Courses
  • Computational Fluid Dynamics
  • Numerical Simulation of Waves
  • Advanced Composite Materials

Optional Courses

  • Fire and Explosion Engineering
  • Structural Dynamics

SEMESTER 2

  • Compulsory Courses
  • Finite Element Methods
  • Mathematical Optimisation
  • Engineering Risk and Reliability Analysis

Optional Courses

  • Project Management
  • Risers Systems Hydrodynamics
  • Renewable Energy 3 (Wind, Marine and Hydro

SEMESTER 3

  • Project

Find out more detail by visiting the programme web page

Why study at Aberdeen?

  • Your skills and knowledge can have huge application potential within newly disruptive industries affecting life and work
  • You can improve employability in Aerospace, Marine, Defences, Transport Systems and Vehicles
  • Some of the knowledge you build directly relates to industries in Aberdeen such as the energy industry.
  • Mechanical Engineering cuts into high growth Industry 4.0 and IOT related areas across many areas disrupted by climate, population growth, and quality of life
  • We ensure close links with industries to attend industry events, visits and teaching by professionals from the industry
  • Graduates are very successful and many work in senior industry roles

Where you study

  • University of Aberdeen
  • 12 Months Full Time
  • September start

International Student Fees 2017/2018

Find out about international fees:

  • International
  • EU and Scotland
  • Other UK

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

Your Accommodation

Campus Facilities

Find out more about living in Aberdeen and living costs

Other engineering disciplines you may be interested in:



Read less
The main objective of this programme is to produce graduates with the ability to plan, execute and produce reports on technical projects for industry and academia. Read more
The main objective of this programme is to produce graduates with the ability to plan, execute and produce reports on technical projects for industry and academia. The programme is composed of taught units, assessed by examination and coursework submission, and a major research project supervised by academic staff in the department.

The facilities and expertise in the Department of Mechanical Engineering have earned us consistently high rankings in university league tables and an internationally excellent rating for research.

Programme structure

Core units

Four mandatory units, each worth 10 credits, are designed to develop your skills of investigation, system analysis and project planning.

- Finite Element Analysis
- Literature Review
- Power Generation for the 22nd Century
- Research Project Proposal

You will be able to choose eight optional 10-credit units from the list below at the start of the programme. The current options list is as follows:

Design and Manufacture

- Virtual Product Development
- Robotic Systems
- Biomechanics

Engineering and the Environment

- Environmental Thermalhydraulics

Materials

- Ultrasonic Non-Destructive Testing
- Non-linear Behaviour of Materials
- Advanced Composites Analysis

Dynamics

- Advanced Dynamics
- Systems and Control Engineering 4
- Nonlinear Structural Dynamics
- Generic Propulsion

Research project (60 credits)

Each student is allocated an individual project, worth 60 credits, which is supported from within the department through the three main research groups:

- Dynamics and Control
- Design and Process Engineering
- Solid Mechanics

Provided that the content is academically rigorous, industrially-related projects are possible, through either your own contacts or the department's strong links with major companies such as Airbus UK, BAE Systems, Bechtel, British Energy, Nestlé, Qinetiq Ltd, Renishaw, Renold Chain and Rolls-Royce.

Careers

Several of our recent students have gone into research, including two recent PhD graduates from Bristol.

One further student is currently working towards an Engineering doctorate with the Systems Centre in Bristol and has been working closely with a local company, Vestas Wind Systems (his industrial sponsor). His research title is "Expanding the life cycle of wind turbine components through reverse engineering and repairing solutions".

Read less
Learn the essential skills and techniques needed to develop autonomous systems, embedded artificial intelligence and robotics. This course is new for 2018. Read more

Learn the essential skills and techniques needed to develop autonomous systems, embedded artificial intelligence and robotics.

This course is new for 2018

Our course will help you take your career forward in an innovative and developing area of engineering. It balances advanced theory with technical skills so that you can learn to develop complete operational systems. Our course is suited to you if you have a background in electronic and electrical engineering, computer science or a related discipline.

During the course, you will gain a comprehensive understanding of how to research, design and develop systems. You’ll explore robotics engineering and software, autonomous systems technologies, processes and products throughout the industry value chain. Other areas you will cover include computational intelligence, machine learning and sensors.

Your studies will focus on tackling engineering challenges using whole-systems approaches. We’ll give you the tools to analyse and evaluate the impact of the resources, processes and products you choose in developing systems. You’ll consider stakeholder needs and factors such as technical, economic, environmental and social.

You’ll learn from academics in our Departments of Computer Science, Electronic & Electrical Engineering, and Mechanical Engineering. Their international collaborations and research expertise feed into your learning experience.

You will work on individual and group projects using the same systems platforms as those used in industry. Our focus on practical learning makes sure you have the skills to design and build robotic platforms and autonomous systems.

You’ll develop:

  • The fundamentals in robotics, electronics and autonomous systems, from established principles to new techniques
  • An understanding of design processes and methodologies and how to apply them
  • Awareness of current challenges and the latest thinking in electronic systems design
  • The ability to test a range of concepts and apply them to engineering projects

You’ll graduate with the skills to innovate and deliver resource-efficient practices and solutions for robotic and autonomous systems. Your knowledge will prepare you for a career in the engineering sector or for further postgraduate study and research.

We also offer this course without a placement (3 semesters).

Course structure

See our webpage for details.



Read less

  • 1
Show 10 15 30 per page



Cookie Policy    X