• Swansea University Featured Masters Courses
  • Northumbria University Featured Masters Courses
  • University of Derby Online Learning Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • Aberystwyth University Featured Masters Courses
  • University of Surrey Featured Masters Courses
  • University of Bristol Featured Masters Courses
King’s College London Featured Masters Courses
University of Bedfordshire Featured Masters Courses
University of Birmingham Featured Masters Courses
Xi’an Jiaotong-Liverpool University Featured Masters Courses
University of Hertfordshire Featured Masters Courses
0 miles
Engineering×

Teesside University Masters Degrees in Petroleum Engineering

We have 2 Teesside University Masters Degrees in Petroleum Engineering

  • Engineering×
  • Petroleum Engineering×
  • Teesside University×
  • clear all
Showing 1 to 2 of 2
Order by 
Teesside is a major European centre for the chemical and petroleum processing sector and our MSc helps you gain knowledge and develop skills with industrial relevance. Read more

Teesside is a major European centre for the chemical and petroleum processing sector and our MSc helps you gain knowledge and develop skills with industrial relevance. Petroleum reservoir engineering, well drilling, petroleum chemistry and economics of the oil and gas sector are just some of the topics covered.

Course details

There are three routes you can select from to gain a postgraduate Master’s award:

  • MSc Petroleum Engineering – one year full time
  • MSc Petroleum Engineering – two years part time
  • MSc Petroleum Engineering (with Advanced Practice) two years full time

The one-year programme is a great option if you want to gain a traditional MSc qualification – you can find out more here. This two-year master’s degree with advanced practice enhances your qualification by adding to the one-year master’s programme an internship, research or study abroad experience.

The MSc Petroleum Engineering (with Advanced Practice) offers you the chance to enhance your qualification by completing an internship, research or study abroad experience in addition to the content of the one-year MSc.

The programme of lectures and project work encompasses a range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems.

Professional accreditation

Our one-year MSc Petroleum Engineering course is accredited by the Energy Institute under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC. 

By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification. The earning potential of chartered petroleum engineers can exceed £100,000 a year.

The two-year MSc Petroleum Engineering with Advanced Practice incorporates all the elements of the one-year MSc and adds to these the advanced practice module. The new title is being prepared for formal recognition as accredited title. 

Teesside University Society of Petroleum Engineering student chapter

Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase industrial networking opportunities for students.

What you study

For the MSc with advanced practice, you complete 120 credits of taught modules, a 60-credit master’s research project and 60 credits of advanced practice.

You select your master’s research project from titles suggested by either industry or our academic staff but you may also, with your supervisor’s agreement, suggest your own titles. 

Student projects

Here are some examples of the Major Project module developed by our MSc Petroleum Engineering students.

View the projects

Course structure

Core modules

  • Drill Engineering and Well Completion
  • Hydrocarbon Production Engineering
  • Material Balance and Recovery Mechanisms
  • Petroleum Chemistry
  • Petroleum Economics and Simulation
  • Petroleum Reservoir Engineering
  • Practical Health and Safety Skills
  • Research and Study Skills
  • Research Project (Advanced Practice)

Advanced Practice options

  • Research Internship
  • Study Abroad
  • Vocational Internship

Modules offered may vary.

Employability

This course provides specialist education tailored to the upstream and downstream petroleum industry. The relevance of this education, combined with our careful selection of candidates, has encouraged oil and gas companies to target our graduates for recruitment over the years.

The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists. 

It is widely recognised that a steady influx of fresh people and ideas is vital for the longer-term success and stability of an organisation. As a result, it is expected that recruitment will continue, especially if you have the motivation and appropriate qualifications.



Read less
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance. Read more

Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance.

Course details

The programme of lectures and project work, encompasses a wide range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The course is applied in nature and has been designed so that on completion, you are technically well prepared for a career in industry.

Professional accreditation

Our MSc Petroleum Engineering is accredited by the Energy Institute, under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC.

By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification, and the earning potential of chartered petroleum engineers can exceed £100,000 a year.

Teesside University Society of Petroleum Engineering student chapter

Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase the industrial networking opportunities for students. 

What you study

For the Postgraduate Diploma (PgDip) award you must successfully complete 120 credits of taught modules. For an MSc award you must successfully complete 120 credits of taught modules and a 60-credit master's research project.

You select your master’s research projects from titles suggested by either industry or our academic staff, but you may also, with your supervisor’s agreement, suggest your own titles. 

Student projects

Here are some examples of the Major Project module developed by our MSc Petroleum Engineering students.

View the projects

Course structure

Core modules

  • Drill Engineering and Well Completion
  • Hydrocarbon Production Engineering
  • Material Balance and Recovery Mechanisms
  • Petroleum Chemistry
  • Petroleum Economics and Simulation
  • Petroleum Reservoir Engineering
  • Practical Health and Safety Skills
  • Research and Study Skills

MSc candidates

  • Research Project

Modules offered may vary.

Teaching

How you learn

The course is delivered using a series of lectures, tutorials and laboratory sessions.

Our MSc Petroleum Engineering is supported by excellent laboratory and engineering machine workshop facilities including fluid flow measurement, computer modelling laboratories, other laboratories and workshops, an excellent library and computing facilities. We have invested around £150,000 in laboratory equipment particularly in within core analysis and enhanced oil recovery. 

We have several computer laboratories equipped with specialised and general-purpose software. This generous computing provision gives you extended access to industry-standard software – it allows you to develop skills and techniques using important applications. For upstream processes, Teesside University has access to educational software packages like Petrel, Eclipse, CMG, PIPESIM and Ecrin to simulate the behaviour of oil reservoirs, calculating oil in situ, and oil and gas production optimisation. As for downstream processes, you can use HYSYS to test different scenarios to optimise plant designs. 

Petroleum Experts Ltd has donated to Teesside University a network system and 10 educational licences for the IPM suite (Integrated Production Modelling software) which includes Prosper, Gap, Mbal, Pvtp, Reveal and Resolve. This £1.3m system and software is used by our students to design complete field models including the reservoir tanks, all the wells and the surface gathering system.

Petroleum laboratory facilities

Enhanced oil recovery and core analysis laboratory

The flow through porous media, enhanced oil recovery techniques and core analysis is done in the core flooding lab. The lab is equipped with core plugging and trimming, core preparation and conventional core properties measurement equipment. At a higher level, the lab is also equipped to perform some special core analysis measurements such as fluid relative permeabilities as well as rock surface wetting quantification. 

Petrophysics laboratory

The petrophysics lab allows you to study the properties of rocks, particularly the measurement of porosity and evaluation of permeability. The lab is equipped with sieve analysis equipment to investigate grain sorting and its effect on permeability and the porosity of rocks. You are able to gauge saturation and fluid flow through porous media.

Surface characterisation laboratory

The rock surface characterisation lab is equipped with a zeta analyser to measure the rock surface electric charge. You study the rock surface wetting state, adsorption and desorption potential using digitised contact angle apparatus and thermos-gravimetric apparatus respectively.

Drilling laboratory

The drilling lab is equipped with mud measurement equipment including mud density, mud rheology and mud filtration systems to enable you to measure mud cake and formation damage. The lab highlights the importance of oilfield drilling fluids.

How you are assessed

Assessment varies from module to module. The assessment methodology could include in-course assignments, design exercises, technical reports, presentations or formal examinations. For your MSc project you prepare a dissertation.

Employability

These courses provide specialist education tailored to the requirements of both the upstream and downstream petroleum industry. The relevance of this education combined with careful selection of candidates has encouraged oil and gas companies to target our graduates for recruitment over the years.

The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy, with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists. 



Read less

  • 1
Show 10 15 30 per page



Cookie Policy    X