• University of Glasgow Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Leeds Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • University of York Featured Masters Courses
Middlesex University Featured Masters Courses
University of Bradford Featured Masters Courses
University of Hertfordshire Featured Masters Courses
Imperial College London Featured Masters Courses
Cardiff University Featured Masters Courses
0 miles
Materials Science×

University of Sheffield, Full Time MSc Degrees in Materials Science

  • Materials Science×
  • University of Sheffield×
  • MSc×
  • Full Time×
  • clear all
Showing 1 to 12 of 12
Order by 
This non-clinical course is run jointly with the Faculty of Engineering. It gives you a comprehensive education in basic materials science and the use of materials in dentistry and surgery. Read more

About the course

This non-clinical course is run jointly with the Faculty of Engineering. It gives you a comprehensive education in basic materials science and the use of materials in dentistry and surgery.

You’ll be taught by some of the leading academics in the fields of bio and dental materials science, tissue engineering, materials characterisation and biomedical engineering. You’ll also learn the principles of research and different techniques for evaluating dental materials and related health technologies.

Your career

We offer clinical and non-clinical courses that will further your career and develop your interests. Many of our clinical graduates go on to specialist dental practice, hospital practice or academic posts.

World-leading dental school

Our internationally recognised oral and dental research is organised into two overarching themes: ‘clinical and person centred’ and ‘basic and applied’. These themes are supported by three interdisciplinary research groups: Bioengineering and Health Technologies, Integrated Bioscience, and Person Centred and Population Oral Health.

We believe that dental science should not be constrained by the traditional boundaries created by specific clinical disciplines and that progress derives from a multidisciplinary approach. Our research supports our teaching enabling a blended approach to learning.
Your course will make the most of virtual learning environments and advanced practical sessions, as well as traditional lectures and seminars.

Facilities

You’ll develop your clinical skills in one of our two clinical skills labs or in our new virtual reality Simulation Suite where you can use haptic technology to undertake a range of clinical techniques.

You’ll complete your clinical training in Sheffield’s Charles Clifford Dental Hospital, part of the Sheffield Teaching Hospitals NHS Foundation Trust. There are 150 dental units with modern facilities for treatment under sedation, a well-equipped dental radiography department, oral pathology laboratories and a hospital dental production laboratory.

We have new modern research facilities and laboratories for tissue culture, molecular biology, materials science and histology- microscopy. All laboratories have dedicated technical support and academic expertise to guide you.

Core modules

Current Concepts in Dentistry; Dental Materials Science; Selecting Dental Materials for Clinical Applications; Science Writing and Health Informatics; Polymer Materials Chemistry; Structural and Physical Properties of Dental and Biomaterials; Group Projects and Developing Research; Introduction to Digital Dentistry and Dental Manufacturing; Dissertation.

Teaching

Teaching is through lectures, seminars and tutorials, personal academic study and self-directed learning, research project.

Assessment

You’ll be assessed on assignments, coursework, examination and research project dissertation.

Read less
It is estimated 70 per cent of innovations are due to an advance in materials. This course provides a solid grounding in all types of man-made materials, and aims to prepare you for a career in industry by teaching you the concepts and theories that make materials science and engineering possible. Read more

About the course

It is estimated 70 per cent of innovations are due to an advance in materials. This course provides a solid grounding in all types of man-made materials, and aims to prepare you for a career in industry by teaching you the concepts and theories that make materials science and engineering possible.

Our research-led teaching introduces you to all the latest developments, and you’ll have the option to specialise in the area that interests you the most.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development; Heat and Materials; Research project in an area of your choice.

Examples of optional modules

Functional and Structural Ceramics; Design and Manufacture of Composites; Materials 
for Energy Applications; Metals Processing Case Studies; Glasses and Cements; Metallurgical Processing; Nanostructures 
and Nanostructuring.

Read less
The course is designed to equip students with the know-how and skills for becoming an expert in materials science with nanotechnology specialisation. Read more

About the course

The course is designed to equip students with the know-how and skills for becoming an expert in materials science with nanotechnology specialisation.

You will experience the unique combination of a foundation semester in the general area of science and engineering of materials, followed by a nanoscience and nanotechnology specific semester to result in an unrivalled comprehensive nanomaterials expertise.

The course content reflects the highly interdisciplinary nature of this subject and allows students to specialise via options, 
and a major project.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Bionanomaterials; Nanoscale Magnetic Materials and Devices; Nanostructures and Nanostructuring; Nanomaterials; Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development

Examples of optional modules

Heat and Materials; Bio-photonics and Bio-imaging

Read less
Polymers and polymer composites are increasingly important in our everyday life and can be found everywhere around us. At the same time, more and more high-performance speciality polymers and polymer nanocomposites have been developed for advanced engineering, plastic electronics, biomedical applications. Read more

About the course

Polymers and polymer composites are increasingly important in our everyday life and can be found everywhere around us. At the same time, more and more high-performance speciality polymers and polymer nanocomposites have been developed for advanced engineering, plastic electronics, biomedical applications.

Bringing together expertise from the Department of Materials Science and Engineering and the Department of Chemistry, and further supported by the Polymer Centre, the UK’s largest single-university academic network in the field of polymers, this course will provide you with a thorough understanding of advanced topics on polymer and composite science and engineering.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Polymer Characterization and Analysis; Polymer Materials Science and Engineering; Polymer Chemistry; Biopolymers and Biomaterials; research project.

Read less
Home to the world-leading research centre, NucleUS Immobilsation Science Laboratory, the Department is recognised as a centre of excellence for the study of waste immobilisation and the development of new materials for future reactors. Read more

About the course

Home to the world-leading research centre, NucleUS Immobilsation Science Laboratory, the Department is recognised as a centre of excellence for the study of waste immobilisation and the development of new materials for future reactors.

You’ll be taught by staff with international reputations in their field, giving you an excellent grounding in materials science which can be applied to nuclear science and engineering, and across the whole nuclear fuel cycle.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Nuclear Reactor Engineering Studies; Nuclear Fuel Cycle; Nuclear Waste Immobilisation and Disposal; Materials for Nuclear Systems; Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development; Research project in the area of your choice.

Examples of optional modules

Glasses and Cements; Advanced Materials Manufacturing – Part 1.

Read less
A multi-disciplinary course, students will be introduced to the field of biomaterials, and important factors in the selection, design, and development of biomaterials for clinical applications. Read more

About the course

A multi-disciplinary course, students will be introduced to the field of biomaterials, and important factors in the selection, design, and development of biomaterials for clinical applications. You’ll develop an understanding of biomaterials science, engineering, regenerative medicine and associated specialisms.

This course will be of particular interest to students interested in facilitating their development into the medical field aiming to contribute in the health care sector.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Materials for Biological Applications; Scientific Writing and Health Informatics; Polymers Materials Chemistry; Biomaterials II (Advances in Biomaterials); Tissue Engineering and Regenerative Medicine; Structural and Physical Properties of Dental and Biomaterials.

Examples of optional modules

Group Projects in Bioengineering; Dental Materials Science; Tissue Structure and Function; Design of Medical Devices and Implants; Introduction to Digital Dentistry and Dental Manufacturing.

Read less
This course is designed with industry in mind. We have also partnered with Engineering Materials and Physics to encompass the breadth of modern polymer science and technology. Read more

About the course

This course is designed with industry in mind. We have also partnered with Engineering Materials and Physics to encompass the breadth of modern polymer science and technology. You’ll become the kind of high-calibre polymer science graduate needed to develop new products and processes in a variety of industries.

Through a combination of theory and practice, we’ll teach you about polymer synthesis, physics, characterisation and the latest developments in polymer research. When you design and conduct your own extended research project, you can look in more detail at the areas you’re most interested in and learn how to communicate your science to the chemical community.

Your future

Our graduates are highly valued in the chemical and pharmaceutical sector. They work all over the world for companies including AkzoNobel, Amgen, AstraZeneca, Corus, Dow Chemicals, GSK, Smith and Nephew and Syngenta. Many move on to PhD study, then careers in research or teaching.

Chemistry is vital to the way we live. It helps power industry and drive economic growth. Polymer science contributes to advances in everything from biology to engineering and medicine. As a researcher in industry or academia you could be involved in work that improves lives and changes the way we see the world.

Learn from world-class research

Top-quality research directly informs our teaching. The 2014 Research Excellence Framework (REF) rates 98 per cent of our work world-class or internationally excellent. You’ll learn about the very latest developments from experts in theory and spectroscopy, synthesis, analytical science, chemical biology and materials.

Labs, equipment and training

We’ll train you to use our modern analytical instrumentation. We have NMR spectroscopy, mass spectrometry, x-ray crystallography, polymer characterisation methods and advanced microscopy. We also have a team of technicians to assist with spectroscopic services. There are labs for molecular biology, protein chemistry, polymer/colloid synthesis and materials characterisation.

Core modules

Fundamental Polymer Chemistry; The Physics of Polymers; Biopolymers and Biomaterials; Polymer Characterisation and Analysis; Research and Presentation Skills and Polymer Laboratory Skills; Extended Research Project.

Examples of optional modules

Smart Polymers and Polymeric Materials; Polymers with Controlled Structures; Design and Manufacture of Composites; Polymer Fibre Composite Materials; Macromolecules at Interfaces and Structured Organic Films; Electronics and Photonics.

Teaching and assessment

We use a mixture of lectures, practicals, workshops and individual research projects. The optional modules in the second semester enable you to specialise in two specific areas of polymer science. You can also tailor your research project to your particular interests.

For all taught modules, written exams contribute 75 per cent towards your final grade. The other 25 per cent comes from continuous assessment, which might include essays on specialised topics or assessed workshops. You also produce a 15,000-word dissertation based on your research project.

Your research project

This can be based in an academic group at the University, or in industry. If it’s industry- based, the topic is usually suggested by the company you’re working with. You may be expected to liaise closely with the company to organise your project.

Read less
Solid State Chemistry covers the latest advances in advanced inorganic materials with applications ranging from energy storage systems, electronic materials and sensors to the more traditional, but increasingly hi-tech materials and industries that include glass, cement and refractories. Read more

About the course

Solid State Chemistry covers the latest advances in advanced inorganic materials with applications ranging from energy storage systems, electronic materials and sensors to the more traditional, but increasingly hi-tech materials and industries that include glass, cement and refractories.

This course is specifically designed to give students a broad overview of the synthesis, structure and properties of inorganic materials together with in-depth coverage of the main groups of ceramic materials and allows you further specialisation when it comes to choosing your personal research project.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Solid State Chemistry; Functional and Structural Ceramics; Glasses and Cements; Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development; Heat and Materials; Research project in an area of your choice.

Read less
A fantastic time to be a specialist in aerospace materials, Sheffield is in the heartland of the UK aerospace industry, meaning many international aerospace companies look to the Department to discover ways to improve both materials and processes for use in their products. Read more

About the course

A fantastic time to be a specialist in aerospace materials, Sheffield is in the heartland of the UK aerospace industry, meaning many international aerospace companies look to the Department to discover ways to improve both materials and processes for use in their products.

You’ll develop knowledge of the manufacturing, processing and properties of the metals and composite materials used in airframes and aeroengines. You’ll also be trained in the fundamentals of thermodynamics, structure and mechanical behaviour.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Aerospace Metals; Design and Manufacture of Composites; Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development; Heat and Materials with Application; Advanced Materials Manufacturing; Deformation, Fracture and Fatigue; Research project in an area of your choice.

Read less
Ceramic materials range from new electroceramics and high-temperature materials for aerospace, as well as other engineering applications, to the more traditional refractories and cements where new systems are being developed. Read more

About the course

Ceramic materials range from new electroceramics and high-temperature materials for aerospace, as well as other engineering applications, to the more traditional refractories and cements where new systems are being developed. Our course introduces you to the theories and concepts that make it all possible.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Core modules

Functional and Structural Ceramics; Glasses and Cements; Science of Materials; Materials Processing and Characterisation; Materials Selection, Properties and Applications; Technical Skills Development; Heat and Materials; Research project in an area of 
your choice.

Examples of optional modules

Solid State Chemistry; Materials for Energy; Nanomaterials.

Read less
Run in partnership with fellow members of the Nuclear Technology Education Consortium (NTEC), Birmingham, Leeds, London and Manchester, the course gives you access to more than 90 per cent of the UK’s academic expertise in nuclear waste immobilisation, decommissioning and clean-up. Read more

About the course

Run in partnership with fellow members of the Nuclear Technology Education Consortium (NTEC), Birmingham, Leeds, London and Manchester, the course gives you access to more than 90 per cent of the UK’s academic expertise in nuclear waste immobilisation, decommissioning and clean-up.

You’ll be based in the department’s world-leading NucleUS Immobilisation Science Laboratory, and will take eight modules on the nuclear fuel cycle. Topics include reactor materials and nuclear waste management with each module including one week at one of our partner universities.

A welcoming department

A friendly, forward-thinking community, our students and staff are on hand to welcome you to the department and ensure you settle into student life.

Your project supervisor will support you throughout your course. Plus you’ll have access to our extensive network of alumni, offering industry insight and valuable career advice to support your own career pathway.

Your career

Prospective employers recognise the value of our courses, and know that our students can apply their knowledge to industry. Our graduates work for organisations including Airbus, Rolls-Royce, the National Nuclear Laboratory and Saint-Gobain. Roles include materials development engineer, reactor engineer and research manager. They also work in academia in the UK and abroad.

90 per cent of our graduates are employed or in further study 6 months after graduating, with an average starting salary of £27,000, the highest being £50,000.

Equipment and facilities

We have invested in extensive, world-class equipment and facilities to provide a stimulating learning environment. Our laboratories are equipped to a high standard, with specialist facilities for each area of research.

Materials processing

Tools and production facilities for materials processing, fabrication and testing, including wet chemical processing for ceramics and polymers, rapid solidification and water atomisation for nanoscale metallic materials, and extensive facilities for deposition of functional and structural coatings.

Radioactive nuclear waste and disposal

Our £3million advanced nuclear materials research facility provides a high-quality environment for research on radioactive waste and disposal. Our unique thermomechanical compression and arbitrary strain path equipment is used for simulation of hot deformation.

Characterisation

You’ll have access to newly refurbished array of microscopy and analysis equipment, x-ray facilities, and surface analysis techniques covering state-of-the-art XPS and SIMS. There are also laboratories for cell and tissue culture, and facilities for measuring electrical, magnetic and mechanical properties.

The Kroto Research Institute and the Nanoscience and Technology Centre enhance our capabilities in materials fabrication and characterisation, and we have a computer cluster for modelling from the atomistic through nano and mesoscopic to the macroscopic.

Stimulating learning environment

An interdisciplinary research-led department; our network of world leading academics at the cutting edge of their research inform our courses providing a stimulating, dynamic environment in which to study.

Teaching and assessment

Working alongside students and staff from across the globe, you’ll tackle real-world projects, and attend lectures, seminars and laboratory classes delivered by academic and industry experts.

You’ll be assessed by formal examinations, coursework assignments and a dissertation.

Sample modules

Processing, Storage and Disposal of Nuclear Waste; Nuclear Fuel Cycle; Reactor Physics and Criticality; Risk Management.

Read less
The majority of new buildings in the UK have steel structures, the use of steel in construction is growing in many other parts of the world. Read more

About the course

The majority of new buildings in the UK have steel structures, the use of steel in construction is growing in many other parts of the world.

This specialist course aims to prepare structural engineers for careers in the global construction industry by providing advanced knowledge of the properties and applications of steel.

There is an active steel structures group within the department whose research feeds directly into our MSc (Eng) in Steel Construction.

About us

We are one of the largest and most active civil engineering departments in the UK. All our masters courses are informed by our own world-leading research and industry needs. The 2014 Research Excellence Framework (REF) puts us in the UK top four.

Our structures-based courses are accredited by The Institution of Civil Engineers, Institution of Structural Engineers, Chartered Institution of Highways and Transportation, and Institute of Highway Engineers as satisfying part 2 academic base requirements for a Chartered Engineer under UK-SPEC.

Your career

Our graduates work for top UK and international consultancies, contractors, regulators, universities and other private and public sector organisations.

Many of them join engineering consultancies, in roles such as Structural Engineer, Building Services Engineer and Sustainability Consultant. Some join architecture practices. Employers include Arup, Buro Happold, Capita Symonds, Roger Preston and Partners, Cundall and Foster and Partners.

Core modules

Linear Systems and Structural Analysis
Structural Dynamics (Earthquakes and Vibration)
Computational Structural Analysis and Research Skills
Structural Design
Structural Design and Fire Resistance

Examples of optional modules

Innovations in Structural Concrete
Advanced Simulation of High Strain Rate Dynamics
Blast and Impact Effects on Structures
Design of Earthquake Resistant Structures
Geotechnical Design

Teaching and assessment

Lectures, design tutorials, computational tutorials, lab work and industrial seminars.

All courses use lectures by academic staff and industrial partners, laboratory work, site visits, design projects and dissertation. Assessment is by formal examinations, coursework assignments and a dissertation with oral examination.

September–June: taught modules and preparation for your dissertation.
June–August: complete your dissertation.

Your research dissertation gives you the opportunity to work with an academic on a piece of research in a subdiscipline. We’ll give you training in research skills.

Read less

  • 1
Show 10 15 30 per page


Share this page:

Cookie Policy    X