• Northumbria University Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • University of Derby Online Learning Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Aberystwyth University Featured Masters Courses
  • University of Leeds Featured Masters Courses

Postgrad LIVE! Study Fair

Birmingham | Bristol | Sheffield | Liverpool | Edinburgh

Cranfield University Featured Masters Courses
FindA University Ltd Featured Masters Courses
University of Cambridge Featured Masters Courses
Southampton Solent University Featured Masters Courses
Swansea University Featured Masters Courses
United Kingdom
Glasgow×
0 miles
Engineering×

Full Time MSc Degrees in Engineering, Glasgow, United Kingdom

We have 76 Full Time MSc Degrees in Engineering, Glasgow, United Kingdom

  • Engineering×
  • United Kingdom
  • Glasgow×
  • MSc×
  • Full Time×
  • clear all
Showing 1 to 15 of 76
Order by 
The Masters in Civil Engineering & Management introduces you to contemporary business and management issues while increasing your depth of knowledge in your chosen civil engineering speciality. Read more
The Masters in Civil Engineering & Management introduces you to contemporary business and management issues while increasing your depth of knowledge in your chosen civil engineering speciality.

Why this programme

◾Civil engineering at the University of Glasgow is ranked 4th in the UK and 1st in Scotland (Guardian University Guide 2017).
◾With a 93% overall student satisfaction in the National Student Survey 2016, Civil Engineering at Glasgow continues to meet student expectations combining both teaching excellence and a supportive learning environment.
◾The University has a long history of research in Civil Engineering. The UK's first Chair of Civil Engineering was established at the University in 1840 and early occupants such as William J. M. Rankine set a research ethos that has endured.
◾You will be taught jointly by staff from the School of Engineering and the Adam Smith Business School. You will benefit from their combined resources and expertise and from an industry-focused curriculum.
◾If you are a graduate engineer looking to broaden your knowledge of management while also furthering your knowledge of civil engineering, this innovative programme is designed for you.
◾You will gain first-hand experience of managing an engineering project through the integrated systems design project, allowing development of skills in project management, quality management and costing.
◾You will be able to apply management to engineering projects, allowing you to gain an advantage in today’s competitive job market and advance to the most senior positions within an engineering organisation.
◾This programme has a September and January intake.

Programme structure

There are two semesters of taught material and a summer session during which you will work on an individual supervised project and write a dissertation on its outcomes. Students entering the programme in January are restricted to civil engineering (i.e. excluding management) topics only.

Semester 1

You will be based in the Adam Smith Business School, developing knowledge and skills in management principles and techniques. We offer an applied approach, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.
◾Contemporary issues in human resource management
◾Managing creativity and innovation
◾Managing innovative change
◾Marketing management
◾Operations management
◾Project management.

Semester 2

You will study engineering courses, which aim to enhance your group working and project management capability at the same time as improving your depth of knowledge in chosen civil engineering subjects.
◾Integrated systems design project.

Optional courses

Select a total of 4 courses from Lists A and B, at least 1 must be from List A:

List A

◾Advanced soil mechanics 5
◾Advanced structural analysis and dynamics 5
◾Computational modelling of non-linear problems 5
◾Introduction to wind engineering
◾Principles of GIS.

List B

◾Geotechnical engineering 3
◾Ground engineering 4
◾Recycling urban land
◾Structural analysis 4
◾Transportation systems engineering 4.

Project or dissertation

You will undertake an individual project or dissertation work in the summer period (May–August). This will give you an opportunity to apply and consolidate the course material and enhance your ability to do independent work, as well as present results in the most appropriate format. Project and dissertation options are closely linked to staff research interests. September entry students have a choice of management dissertation topics in addition to civil engineering projects, and January entry students have a choice of civil engineering projects.

Projects

There are two semesters of taught material and a summer session during which you will work on an individual supervised project and write a dissertation on its outcomes. Students entering the programme in January are restricted to civil engineering (i.e. excluding management) topics only.

Semester 1

You will be based in the Adam Smith Business School, developing knowledge and skills in management principles and techniques. We offer an applied approach, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.
◾Contemporary issues in human resource management
◾Managing creativity and innovation
◾Managing innovative change
◾Marketing management
◾Operations management
◾Project management.

Semester 2

You will study engineering courses, which aim to enhance your group working and project management capability at the same time as improving your depth of knowledge in chosen civil engineering subjects.
◾Integrated systems design project.

Optional courses

Select a total of 4 courses from Lists A and B, at least 1 must be from List A:

List A
◾Advanced soil mechanics 5
◾Advanced structural analysis and dynamics 5
◾Computational modelling of non-linear problems 5
◾Introduction to wind engineering
◾Principles of GIS.

List B
◾Geotechnical engineering 3
◾Ground engineering 4
◾Recycling urban land
◾Structural analysis 4
◾Transportation systems engineering 4.

Project or dissertation

You will undertake an individual project or dissertation work in the summer period (May–August). This will give you an opportunity to apply and consolidate the course material and enhance your ability to do independent work, as well as present results in the most appropriate format. Project and dissertation options are closely linked to staff research interests. September entry students have a choice of management dissertation topics in addition to civil engineering projects, and January entry students have a choice of civil engineering projects.

Industry links and employability

◾The programme makes use of the combined resources and complementary expertise of the civil engineering and business school staff to deliver a curriculum which is relevant to the needs of industry.
◾You, as a graduate of this programme, will be capable of applying the extremely important aspect of management to engineering projects allowing you to gain an advantage in today’s competitive job market and advance to the most senior positions within an engineering organisation.
◾The School of Engineering has extensive contacts with industrial partners who contribute to several of their taught courses, through active teaching, curriculum development, and panel discussion. Recent contributions in Civil Engineering include: Arup and Mott MacDonald.
◾During the programme students have an opportunity to develop and practice relevant professional and transferable skills, and to meet and learn from employers about working in the civil engineering industry.

Read less
Those who study the Masters in Civil Engineering will gain advanced knowledge and associated analytical and problem-solving skills in a range of key sub-disciplines of Civil Engineering, and develop the ability to apply this knowledge in engineering design and to the solution of open-ended and multi-disciplinary problems. Read more
Those who study the Masters in Civil Engineering will gain advanced knowledge and associated analytical and problem-solving skills in a range of key sub-disciplines of Civil Engineering, and develop the ability to apply this knowledge in engineering design and to the solution of open-ended and multi-disciplinary problems. The MSc in Civil Engineering is intended for students with a first degree in Civil Engineering or a closely related discipline who wish to extend their expertise to a higher level in preparation for a professional career.

Why this programme

◾Civil engineering at the University of Glasgow is ranked 4th in the UK and 1st in Scotland (Guardian University Guide 2017).
◾The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
◾You will select courses from key sub-disciplines of Civil Engineering, notably structural engineering, geotechnical engineering, environmental engineering, computational mechanics and transportation engineering.
◾With all lecture courses selected from sets of options, you can choose to develop a degree of specialization in a given sub-discipline or to remain broad-based, thus tailoring the programme to suit your interests and career aspirations.
◾Two major design project courses will develop your abilities to apply your knowledge of Civil Engineering to design of engineering projects. One of these projects is specifically civil engineering in content, but the other is multi-disciplinary in nature and will also involve MSc students from other engineering disciplines, working in teams to tackle a broad-based design problem.
◾You will also undertake an individual project, allowing you to investigate a specific topic in considerable depth.
◾You will be taught by staff who are leading researchers in their fields, so that course content can reflect state-of-the-art understanding, relevant to future challenges for civil engineering industry and the profession.
◾The programme is designed to provide the advanced education required of civil engineers of tomorrow.
◾With a 93% overall student satisfaction in the National Student Survey 2016, Civil Engineering at Glasgow continues to meet student expectations combining both teaching excellence and a supportive learning environment.

Programme structure

Modes of delivery of the MSc Civil Engineering include lectures, tutorials, design classes and computing labs, and give you the opportunity to take part in team design projects, other coursework and project-based activities, and a major individual project.

Core courses
◾Civil design project
◾Integrated systems design project.

Optional courses

Select a total of 8 courses, at least 5 of which must be from List A:

List A
◾Advanced soil mechanics 5
◾Advanced structural analysis and dynamics 5
◾Applied engineering mechanics 4
◾Computational modelling of non-linear problems 5
◾Introduction to wind engineering
◾Principles of GIS
◾Reclamation of contaminated land 5
◾Structural concrete C5.

List B
◾Environmental biotechnology 4
◾Geotechnical engineering 4
◾Ground engineering 4
◾Renewable energy 4
◾Structural analysis 4
◾Structural design 4
◾Transportation systems engineering 4.

Projects

◾To complete the MSc degree you must undertake an individual project worth 60 credits.
◾Projects can involve laboratory work, computational modelling, fieldwork, theoretical development, design or a study of industry application.
◾The project is an important part of your MSc where you can apply your newly learned skills and show to future employers that you have been working on cutting edge projects relevant to industry.
◾Your project is completed under the supervision of an academic staff member. You can choose a topic from a list of MSc projects in Civil Engineering. Alternatively, should you have your own idea for a project, staff members are always open to discussion of topics.

Example projects

Examples of projects can be found online

*Posters shown are for illustrative purposes

Industry links and employability

◾The School of Engineering has extensive contacts with industrial partners who contribute to several of the taught courses, through active teaching, curriculum development, and panel discussion.
◾The two design projects courses represent the types of projects undertaken in industry, and typically there will be input from industry practitioners in setting up the projects used in these courses.
◾Some MSc individual projects will involve interaction with industry.

Career prospects

Career opportunities include positions in civil engineering, structural engineering and environmental engineering, and working with design consultants, contractors and public authorities or utilities.

Read less
The Masters in Mechanical Engineering & Management offers you the opportunity to develop the knowledge and skills needed for modern engineering or technology management. Read more

The Masters in Mechanical Engineering & Management offers you the opportunity to develop the knowledge and skills needed for modern engineering or technology management. The programme content includes design engineering and other mechanical engineering disciplines.

Why this programme

  • The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
  • You will be taught jointly by staff from the School of Engineering and the Adam Smith Business School. You will benefit from their combined resources and expertise and from an industry-focused curriculum.
  • Mechanical Engineering is a core engineering discipline that has a long history in the University of Glasgow, dating back to the 1760’s and includes famous people as James Watt.
  • If you have a mechanical engineering background, but with little management experience and are wanting to develop your knowledge of management while also furthering your knowledge of mechanical engineering, this programme is designed for you.
  • You will learn to understand management principles and practices in an engineering environment, evaluate engineering information, and apply business and management tools. You will combine engineering and management knowledge and skills in projects and problem solving.
  • The programme is split into two semesters and a summer session. One semester will be based in the Adam Smith Business School and is aimed at developing knowledge and skills of management principles and techniques. An applied approach is adopted, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.
  • During the other semester there will be a combination of compulsory and optional courses that will combine to provide the required credits in Mechanical Engineering.
  • In the summer session, a project will be undertaken by MSc students. The topic of the project can be either in Management, or Mechanical Engineering, in which case the topic will usually be closely allied with the research interests of the Discipline.
  • This programme has a September and January intake.

Aims of the programme:

  • To understand management principles and practices in an engineering environment.
  • To evaluate engineering information, and subsequent application of business and management.
  • To combine engineering and management knowledge and skills in projects and problem solving.

Programme structure

There are two semesters of taught material and a summer session working on a project or dissertation for MSc students. September entry students start with management courses and January entry students with engineering courses.

Semester 1   

You will be based in the Business School, developing knowledge and skills in management principles and techniques. We offer an applied approach, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.

Core courses

  • Contemporary issues in human resource management 
  • Managing creativity and innovation 
  • Managing innovative change 
  • Marketing management 
  • Operations management 
  • Project management.

Semester 2

You will study engineering courses, which aim to enhance your group working and project management capability at the same time as improving your depth of knowledge in chosen mechanical engineering subjects.

Core course

  • Integrated systems design project.

Optional courses

  • Desalination technology
  • Dynamics
  • Materials engineering
  • Vibration.

Project or dissertation

You will undertake an individual project or dissertation work in the summer period (May–August). This will give you an opportunity to apply and consolidate the course material and enhance your ability to do independent work, as well as present results in the most appropriate format. Project and dissertation options are closely linked to staff research interests. September entry students have a choice of management dissertation topics in addition to mechanical engineering projects, and January entry students have a choice of mechanical engineering projects.

Career prospects

Career opportunities include positions in project management, engineering design, materials & mechanics, dynamics, control and desalination technology.

Graduates of this programme have gone on to positions such as:

Technology Engineer at Procter and Gamble

Quality Engineer at Worcester Bosch.



Read less
The Masters in Biomedical Engineering is an interdisciplinary programme that will equip you for employment within the biomedical engineering sector. Read more

The Masters in Biomedical Engineering is an interdisciplinary programme that will equip you for employment within the biomedical engineering sector. This programme addresses all the key aspects of biomedical engineering.

Why this programme

  • The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
  • Biomedical Engineering is the newest division of the School, bringing together our long standing expertise. Research covers four themes, Biomaterials and Tissue Engineering, Bionanotechnology, Rehabilitation Engineering, Biosensors and Diagnostics.
  • The course is based on in-depth modules and individual projects, which are designed to give graduates an opportunity to specialise in specific areas of Biomedical Engineering or to cover a more general Biomedical Engineering syllabus.
  • This taught MSc/PG Dip offers a wide exposure to the philosophy and practice of Biomedical Engineering whilst simultaneously enabling the students to deepen their knowledge of specific areas of biomedical engineering disciplines, which have been chosen on the basis of the research strengths of the Discipline. The choice includes Biomaterials and Biomechanics including their application in Tissue Engineering and Regenerative Medicine, Rehabilitation Engineering includes applied within Glasgow hospital and bioelectronics and diagnostic systems, designed to be applied from advanced hospitals to out-in-the-field situations.
  • The compulsory part provides the basic underlying knowledge need throughout biomedical engineering these core courses are taken in both semesters to allow a wide range of optional subjects to be available.
  • You will broaden and/or deepen your knowledge of biomedical engineering disciplines.

Programme structure

Modes of delivery of the MSc in Biomedical Engineering include lectures, seminars and tutorials and allow students the opportunity to take part in lab, team work and study trips in the UK. You will undertake an MSc project working on a specific research area with one of the academics.

Core courses

  • Applications of biomedical engineering
  • Biological fluid mechanics
  • Cellular biophysics
  • Energy in biological systems
  • Medical imaging
  • Statistics for biomedical engineering
  • MSc project.

Optional courses

  • Advanced imaging and therapy
  • Applied engineering mechanics
  • Bioinformatics and systems biology
  • Biomechanics
  • Biosensors and diagnostics
  • Microscopy and optics
  • Nanofabrication
  • Rehabilitation engineering
  • Scaffolds and tissues
  • Signal processing of bio-signatures
  • Tissue and cell engineering.

Career prospects

Career opportunities include positions in rehabilitation engineering, biomaterials for reconstructive surgery, biosensors, device and implant design and development, and biosignal processing.



Read less
Why this course?. Engineering graduates are in high demand from recruiting companies worldwide. This course has been designed to meet the needs of a broad range of engineering industries. Read more

Why this course?

Engineering graduates are in high demand from recruiting companies worldwide.

This course has been designed to meet the needs of a broad range of engineering industries. As a Masters student, you’ll gain the specialist and generic skills necessary to lead future developments.

This one-year MSc in civil engineering is suitable for graduates with a background in any discipline of civil engineering. Applicants with a degree in environmental engineering, earth science, maths, physics and mechanical engineering may also be considered.

You can graduate with an MSc in Civil Engineering or choose to follow a specialist named stream:

- Civil Engineering with Structural Engineering & Project Management

- Civil Engineering with Geotechnical Engineering & Project Management

- Civil Engineering with Geoenvironmental Engineering & Project Management

- Civil Engineering with Water Engineering & Project Management

See the website https://www.strath.ac.uk/courses/postgraduatetaught/civilengineering/

You’ll study

You'll take the compulsory module Civil Engineering Design Projects. This module gives you the opportunity to work on real projects. You can choose between a renewable energy project or an industrial project. You’ll develop comprehensive and innovative designs that involve structural engineering, geotechnical engineering and water engineering, management, environmental and financial planning.

You'll also take the compulsory module Research Protocols for Science & Engineering which supports the dissertation project. You also have a wide choice of optional modules.

Following successful completion of the taught component, you’ll undertake a dissertation. If you’re on one of the specialist streams you’ll undertake a research project on a topic related to that stream. The dissertation can be linked to the industrial placement and worked on together with the industrial partner.

Placements

As part of the class Independent Study in Collaboration with Industry, you can apply to work with industry projects.

Facilities

In the Department of Civil & Environmental Engineering we’ve invested £6million in state-of-the-art laboratories which cover core areas of activity including:

- geomechanics

- microbiology

- analytical chemistry

- structural design

- Field investigation

We’re equipped with:

- nanoseismic systems for monitoring the mechanical evolution of soil and rock masses

- Electrical Resistivity Tomography systems to detect clay fissuring and ground water flow in earth-structures

- dielectric permittivity-based sensors to monitor water flow in the sub-surface environment

- Geomechanics Laboratory

We’re equipped with state-of-the art technologies for testing multiphase (unsaturated) porous geomaterials. These include:

- suction-controlled double-wall triaxial cells

- pressure plates

- triaxial cells equipped with bender elements for dynamic testing

- image analysis unit to monitor soil specimen deformation

- instruments for measurement of pore-water tensile stress

- Mercury Intrusion Porosimeter and SEM for microstructure investigation

- Software & numerical modelling

You’ll have access to a wide range of software packages relevant to civil and geotechnical engineering applications, including:

- GEOSTUDIO suite (Slope, Seep, Sigma, Quake, Temp, CTran, Air and Vadose)

- ABAQUS finite element packages

- Ansys

- Autodesk Civil 3D

- Limit State

- Strand 7

- Talren 4

Accreditation

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a partial CEng accredited undergraduate first degree.

Open Access

Home students can also choose to study through Open Access. This is initially a non-graduating route. You register for one module at a time and have the option to build up credits eventually leading to a Postgraduate Certificate, Postgraduate Diploma or MSc. You can take up to five years to achieve the qualification.

This option is popular with students in employment, who may wish to undertake modules for Continuing Professional Development purposes.

Home students who do not meet the normal MSc entry requirements for this programme are welcome to apply through the Open Access route instead.

Additional requirements

For candidates whose first language is not English, minimum standards of English proficiency are an IELTS score of 6.5. Applicants with slightly lower scores have the opportunity to attend the University's Pre-Sessional English classes to bring them up to the required level. Some exceptions to the above may apply to nationals of UKBA-approved Majority English Speaking countries.

Pre-Masters preparation course

The Pre-Masters Programme is a preparation course for international students (non EU/UK) who do not meet the entry requirements for a Masters degree at the University of Strathclyde. The Pre-Masters programme provides progression to a number of degree options

To find out more about the courses and opportunities on offer visit isc.strath.ac.uk or call today on +44 (0) 1273 339333 and discuss your education future. You can also complete the online application form. To ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers today.

Learning & teaching

The course has two semesters of taught classes. Some classes involve fieldtrips and/or lab work. For fieldtrips, you need to wear warm clothing, waterproof jacket/trousers and sturdy shoes/boots (e.g. hiking boots or non-slip wellington boots).

For lab work, you’ll need a lab coat. At the start of your course you’ll attend a two-day induction welcoming you to the department

Careers

High-calibre civil engineers are in demand throughout the world. As a graduate you'll have many different career options including:

- engineering consultancies, where the work normally involves planning and designing projects

- contractors, where you’ll be managing and overseeing works on-site

- working for utilities or local authorities

- working for large companies such as those within oil production, mining and power generation

How much will I earn?

As a contracting civil engineer the average graduate starting salary is around £23,500. With five years' experience this could rise to £28,523

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/index.jsp



Read less
The Masters in Biomedical Engineering is an interdisciplinary programme that will equip you for employment within the biomedical engineering sector. Read more

The Masters in Biomedical Engineering is an interdisciplinary programme that will equip you for employment within the biomedical engineering sector. This programme addresses all the key aspects of biomedical engineering.

Why This Programme

  • The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
  • Biomedical Engineering is the newest division of the School, bringing together our long standing expertise. Research covers four themes, Biomaterials and Tissue Engineering, Bionanotechnology, Rehabilitation Engineering, Biosensors and Diagnostics.
  • The course is based on in-depth modules and individual projects, which are designed to give graduates an opportunity to specialise in specific areas of Biomedical Engineering or to cover a more general Biomedical Engineering syllabus.
  • This taught MSc/PG Dip offers a wide exposure to the philosophy and practice of Biomedical Engineering whilst simultaneously enabling the students to deepen their knowledge of specific areas of biomedical engineering disciplines, which have been chosen on the basis of the research strengths of the Discipline. The choice includes Biomaterials and Biomechanics including their application in Tissue Engineering and Regenerative Medicine, Rehabilitation Engineering includes applied within Glasgow hospital and bioelectronics and diagnostic systems, designed to be applied from advanced hospitals to out-in-the-field situations.
  • The compulsory part provides the basic underlying knowledge need throughout biomedical engineering these core courses are taken in both semesters to allow a wide range of optional subjects to be available.
  • You will broaden and/or deepen your knowledge of biomedical engineering disciplines.

Programme structure

Modes of delivery of the MSc in Biomedical Engineering include lectures, seminars and tutorials and allow students the opportunity to take part in lab, team work and study trips in the UK. You will undertake an MSc project working on a specific research area with one of the academics.

Core courses

  • Applications of biomedical engineering
  • Biological fluid mechanics
  • Cellular biophysics
  • Energy in biological systems
  • Medical imaging
  • Statistics for biomedical engineering
  • MSc project.

Optional courses

  • Advanced imaging and therapy
  • Applied engineering mechanics
  • Bioinformatics and systems biology
  • Biomechanics
  • Biosensors and diagnostics
  • Microscopy and optics
  • Nanofabrication
  • Rehabilitation engineering
  • Scaffolds and tissues
  • Signal processing of bio-signatures
  • Tissue and cell engineering.

Career prospects

Career opportunities include positions in rehabilitation engineering, biomaterials for reconstructive surgery, biosensors, device and implant design and development, and biosignal processing.



Read less
Why this course?. Civil engineering develops and improves facilities and services that society needs – from the supply of clean water and energy to the design and construction of roads, railways and stations. Read more

Why this course?

Civil engineering develops and improves facilities and services that society needs – from the supply of clean water and energy to the design and construction of roads, railways and stations. Solving problems of air, land and water pollution and protecting society against natural disasters are also important aspects of civil engineering.

Engineering graduates are in high demand from recruiting companies worldwide.

This 18-month MSc course has been designed to meet the needs of a broad range of engineering industries. As a Masters student, you’ll gain the specialist and generic skills necessary to lead future developments, with practical experience provided by the industrial placement.

The course has a significant design element based on the most up-to-date specialist design guidelines. This includes a major design project that integrates acquired knowledge and acts as a platform for structured self-learning.

This MSc in Civil Engineering with Industrial Placement is suitable for graduates with a background in any discipline of civil engineering. Applicants with a degree in environmental engineering, earth science, mathematics, physics and mechanical engineering may also be considered.

The MSc in Civil Engineering with Industrial Placement has three optional specialist streams:

- Structural Engineering & Project Management

- Geotechnical Engineering & Project Management

- Geoenvironmental Engineering & Project Management

- Civil Engineering with Water Engineering & Project Management

See the website https://www.strath.ac.uk/courses/postgraduatetaught/civilengineeringwithindustrialplacement/

Industrial placement

A wide range of companies, such as AECOM, ATKINS, CAPITA, CH2M HILL and ClimateXChange (Scotland’s Centre of Expertise on Climate Change), are offering placements exclusively for this MSc. A full list of companies can be provided upon request. The 8 to 12 weeks industrial placement will take place in the period from June to September.

You’ll study

You'll take the compulsory module Civil Engineering Design Projects. This module gives you the opportunity to work on real projects. You can choose between a renewable energy project or an industrial project. You’ll develop comprehensive and innovative designs that involve structural engineering, geotechnical engineering and water engineering, management, environmental and financial planning.

In additional to the industrial placement you'll also take the compulsory module Research Protocols for Science & Engineering which supports the dissertation project. You also have a wide choice of optional modules.

Following successful completion of the taught component, you’ll undertake a dissertation. If you’re on one of the specialist streams you’ll undertake a research project on a topic related to that stream. The dissertation can be linked to the industrial placement and worked on together with the industrial partner.

Facilities

In the Department of Civil & Environmental Engineering we’ve invested £6million in state-of-the-art laboratories which cover core areas of activity including:

- geomechanics

- microbiology

- analytical chemistry

- structural design

- Field investigation

We’re equipped with:

- nanoseismic systems for monitoring the mechanical evolution of soil and rock masses

- Electrical Resistivity Tomography systems to detect clay fissuring and ground water flow in earth-structures

- dielectric permittivity-based sensors to monitor water flow in the sub-surface environment

- Geomechanics Laboratory

We’re equipped with state-of-the art technologies for testing multiphase (unsaturated) porous geomaterials. These include:

- suction-controlled double-wall triaxial cells

pressure plates

- triaxial cells equipped with bender elements for dynamic testing

- image analysis unit to monitor soil specimen deformation

- instruments for measurement of pore-water tensile stress

- Mercury Intrusion Porosimeter and SEM for microstructure investigation

- Software and numerical modelling

You’ll have access to a wide range of software packages relevant to civil and geotechnical engineering applications, including:

- GEOSTUDIO suite (Slope, Seep, Sigma, Quake, Temp, CTran, Air and Vadose)

- ABAQUS finite element packages

- Ansys

- Autodesk Civil 3D

- Limit State

- Strand 7

- Talren 4

Accreditation

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a partial CEng accredited undergraduate first degree.

Additional requirements

For candidates whose first language is not English, minimum standards of English proficiency are an IELTS score of 6.5. Applicants with slightly lower scores have the opportunity to attend the University's Pre-Sessional English classes to bring them up to the required level. Some exceptions to the above may apply to nationals of UKBA-approved Majority English Speaking countries.

Pre-Masters preparation course

The Pre-Masters Programme is a preparation course for international students (non EU/UK) who do not meet the entry requirements for a Masters degree at the University of Strathclyde. The Pre-Masters programme provides progression to a number of degree options

To find out more about the courses and opportunities on offer visit isc.strath.ac.uk or call today on +44 (0) 1273 339333 and discuss your education future. You can also complete the online application form. To ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers today.

Learning & teaching

Some classes involve fieldtrips and/or lab work. For fieldtrips, you need to wear warm clothing, waterproof jacket/trousers and sturdy shoes/boots (e.g. hiking boots or non-slip wellington boots).

For lab work, you’ll need a lab coat. At the start of your course you’ll attend a two-day induction welcoming you to the department

Careers

High-calibre civil engineers are in demand throughout the world. As a graduate you'll have many different career options including:

- engineering consultancies, where the work normally involves planning and designing projects

- contractors, where you’ll be managing and overseeing works on-site

- working for utilities or local authorities

- working for large companies such as those within oil production, mining and power generation

How much will I earn?

As a contracting civil engineer the average graduate starting salary is around £23,500. With five years' experience this could rise to £28,523*.

*Information is intended only as a guide.

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/index.jsp



Read less
Mechanical engineers are both generalists and specialists, bringing broad expertise and specialised mastery to their roles as project managers, leaders and innovators. Read more

Mechanical engineers are both generalists and specialists, bringing broad expertise and specialised mastery to their roles as project managers, leaders and innovators. As a student of GCU's MSc Mechanical Engineering, you'll continue in this tradition. The programme is designed to expand your core knowledge of the discipline while enhancing your skills as a specialist in either design or manufacture.

The programme was developed according to the UK Engineering Council's benchmark requirements for professional engineering, ensuring you'll enter the workforce with the relevant capabilities that employers value. It is also accredited by the Institution of Mechanical Engineers (IMechE). Furthermore, our industrial advisory board offers strong connections to industry.

GCU's mechanical engineering department contributes to important research in the discipline, investigating topics like materials and manufacturing, finite element analysis, computer-aided design and manufacture, and machine condition monitoring.

The MSc Mechanical Engineering curriculum encourages you to develop as a professional as well as an engineer.

  • Build your interpersonal skills to succeed as a team member and manager
  • Explore topics such as project planning and methodology, strategy and innovation, and computer-aided engineering
  • Practise managing resources and meeting project objectives
  • Choose from two options for specialisation: Design or Manufacture

When you study engineering at GCU, you'll join a welcoming community of learners and professionals. You'll find classmates and colleagues who are creative and entrepreneurial, committed to using their expertise to make a positive impact and advance the common good.

What you will study

The programme offers two specialist study options; Design and Manufacture. These options share a number of common modules that directly reflect the activities of a professional mechanical engineer. Students complete eight taught modules - four in trimester A and four in trimester B; and an MSc dissertation in trimester C.

  • Project Planning and Methodology
  • Strategy and Innovation
  • Advanced Computer-Aided Engineering
  • Condition Monitoring
  • Project
  • Specialist Modules (Design)
  • Specialist Modules (Manufacture)

Assessment methods

The taught modules are either assessed by coursework only or a combination of coursework and examination. In the later case the final mark is determined by weighted average of the two elements. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Professional accreditation

The development of these Masters options is in direct response to the specification of benchmark requirements for professional competence by the UK's Engineering Council (UK-SPEC). This programme is accredited by the Institution of Mechanical Engineers (IMechE).

Why choose this programme?

The MSc in Mechanical Engineering has very strong industrial links through its industry advisory board. The school participates in many research activities within the area of mechanical engineering. This includes; advanced materials and manufacturing processes, finite element analysts, computer-aided design and manufacture and machine condition monitoring.

HM Forces

In partnership with HM Forces, GCU has identified this programme is being particularly suited to military and ex-military men and women. Visit the HM Forces Careers Zone for more information on the services we provide.

Graduate prospects

Our graduates are appreciated by employers for their career-focused attitudes and socially driven perspectives. With skilled engineers in high demand, you can expect excellent job prospects in the field.

Graduates of the MSc Mechanical Engineering find employment in the oil and gas industry, defence, computer-aided engineering and building. They also work in mechanical design engineering, project engineering, manufacturing engineering and engineering sales.



Read less
Mechanical engineers are both generalists and specialists, bringing broad expertise and specialised mastery to their roles as project managers, leaders and innovators. Read more

Mechanical engineers are both generalists and specialists, bringing broad expertise and specialised mastery to their roles as project managers, leaders and innovators. As a student of GCU's MSc Mechanical Engineering, you'll continue in this tradition. The programme is designed to expand your core knowledge of the discipline while enhancing your skills as a specialist in either design or manufacture.

The programme was developed according to the UK Engineering Council's benchmark requirements for professional engineering, ensuring you'll enter the workforce with the relevant capabilities that employers value. It is also accredited by the Institution of Mechanical Engineers (IMechE). Furthermore, our industrial advisory board offers strong connections to industry.

GCU's mechanical engineering department contributes to important research in the discipline, investigating topics like materials and manufacturing, finite element analysis, computer-aided design and manufacture, and machine condition monitoring.

The MSc Mechanical Engineering curriculum encourages you to develop as a professional as well as an engineer.

  • Build your interpersonal skills to succeed as a team member and manager
  • Explore topics such as project planning and methodology, strategy and innovation, and computer-aided engineering
  • Practise managing resources and meeting project objectives
  • Choose from two options for specialisation: Design or Manufacture

When you study engineering at GCU, you'll join a welcoming community of learners and professionals. You'll find classmates and colleagues who are creative and entrepreneurial, committed to using their expertise to make a positive impact and advance the common good.

What you will study

The programme offers two specialist study options; Design and Manufacture. These options share a number of common modules that directly reflect the activities of a professional mechanical engineer. Students complete eight taught modules - four in trimester A and four in trimester B; and an MSc dissertation in trimester C.

  • Project Planning and Methodology
  • Strategy and Innovation
  • Advanced Computer-Aided Engineering
  • Condition Monitoring
  • Project
  • Specialist Modules (Design)
  • Specialist Modules (Manufacture)

Assessment methods

The taught modules are either assessed by coursework only or a combination of coursework and examination. In the later case the final mark is determined by weighted average of the two elements. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Professional accreditation

The development of these Masters options is in direct response to the specification of benchmark requirements for professional competence by the UK's Engineering Council (UK-SPEC). This programme is accredited by the Institution of Mechanical Engineers (IMechE).

Why choose this programme?

The MSc in Mechanical Engineering has very strong industrial links through its industry advisory board. The school participates in many research activities within the area of mechanical engineering. This includes; advanced materials and manufacturing processes, finite element analysts, computer-aided design and manufacture and machine condition monitoring.

HM Forces

In partnership with HM Forces, GCU has identified this programme is being particularly suited to military and ex-military men and women. Visit the HM Forces Careers Zone for more information on the services we provide.

Graduate prospects

Our graduates are appreciated by employers for their career-focused attitudes and socially driven perspectives. With skilled engineers in high demand, you can expect excellent job prospects in the field.

Graduates of the MSc Mechanical Engineering find employment in the oil and gas industry, defence, computer-aided engineering and building. They also work in mechanical design engineering, project engineering, manufacturing engineering and engineering sales.



Read less
This Masters programme provides advanced experience of the central role that manufacture and design take in the integration of mechanical engineering. Read more

This Masters programme provides advanced experience of the central role that manufacture and design take in the integration of mechanical engineering.

Why this programme

  • The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
  • Mechanical Engineering is a core engineering discipline that has a long history in the University of Glasgow, dating back to the 1760’s and including such famous people as James Watt.
  • This programme is based on in-depth modules and individual projects, which are designed to give graduates an opportunity to specialise in any combination of a wide range of Mechanical Engineering areas.
  • This taught MSc/PG Dip offers a wide exposure to the philosophy and practice of Engineering Design whilst simultaneously enabling the students to deepen their knowledge of certain engineering disciplines, which have largely been chosen on the basis of the research and design teaching strengths of the Discipline. The choice includes Materials and Mechanics, Dynamics and Control, Desalination Technology and Thermal Science.
  • The compulsory design part deals with innovation aspects of industrial and mechanical design and the integration of design methods and techniques. Not only is design taught in this way, but also practised in its research activities, both explicitly and implicitly. It is practised explicitly through research in, for instance rapid design and manufacture, and implicitly through the design of, for instance, heart assist devices, paraplegic assist devices and mountain bike components together with apparatus for experiments and for demonstration.
  • You will broaden and/or deepen your knowledge of selected engineering disciplines, which have been chosen on the basis of our research strengths, including materials, vibration, control and desalination.
  • This programme has a September and January intake*.

*For suitable qualified candidates

Programme structure

Modes of delivery of the MSc in Mechanical Engineering include lectures, seminars and tutorials and allow students the opportunity to take part in lab, project and team work.

You will undertake a project where you will apply your newly learned skills and show to future employers that you have been working on cutting-edge projects relevant to the industry.

Core courses

  • Advanced manufacture
  • Integrated engineering design project.

Optional courses

  • Advanced thermal engineering
  • Control
  • Desalination technology
  • Dynamics
  • Lasers
  • Materials engineering
  • Mechanics of solids and structures
  • Vibration.

Career prospects

Career opportunities include positions in engineering design, materials and mechanics, dynamics, control, desalination technology and thermal science.

Graduates of this programme have gone on to positions such as:

Technical Engineer at Bridon International Ltd

Mechanical Engineer in a university

Mechanical Engineer for Oil and Gas at AKER Solutions

Project Engineer in state government.

Accreditation

The MSc Mechanical Engineering is accredited by the Institution of Mechanical Engineering. An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.



Read less
The goal of structural engineering is to predict the performance of structures under extreme events. This Masters in Structural Engineering provides you with a range of methods to analyse and design structures with quantifiable reliability over their design life. Read more

The goal of structural engineering is to predict the performance of structures under extreme events. This Masters in Structural Engineering provides you with a range of methods to analyse and design structures with quantifiable reliability over their design life.

Why this programme

  • If you intend to pursue a career in this specialist area of civil and structural engineering, in design consultancies and elsewhere, or if you want to transfer from other engineering disciplines, this programme is designed for you.
  • This programme offers a curriculum that is relevant to the needs of industry, designed to provide the advanced education required for the structural engineers of tomorrow.
  • The goal of structural engineering is to predict the performance of structures. This programme empowers future engineers with a range of methods to analyse and design structures with quantifiable reliability over their design life.
  • The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.

Programme structure

Modes of delivery of the MSc in Structural Engineering include lectures, seminars, tutorials, a group design project and individual projects.

Core courses

  • Advanced structural analysis and dynamics
  • Applied engineering mechanics
  • Computational modelling of nonlinear problems
  • Structural concrete
  • Structural design
  • Advanced soil mechanics
  • Structural engineering preliminary research project
  • Structural engineering review project
  • Structural design project

MSc students undertake an additional individual project.

Career prospects

This is a new programme which will be delivered the first time in 2016/17. However, it is a continuation of a former Structural Engineering and Mechanics MSc programme. Graduates from the former Structural Engineering and Mechanics programme have gone on to positions such as:

  • Graduate Structural Engineer at Wood Group PSN
  • Research Fellow at Fraunhofer Institute High Speed Dynamics
  • Graduate Structural Engineer at Wood Group
  • Graduate Structural Engineer at Design ID
  • Structure Engineer at Fujian United Benefit Broad Sustainable Building Technology
  • Structural Engineer-Subsea at a structural engineering company
  • Real Estate Assistant at Icade
  • Graduate Structure Engineer at P2ML
  • Graduate Engineer at Technip
  • Civil Engineering Technical Engineer at Hongrun Construction Corporation
  • Subsea Project Engineer at Halliburton
  • Bid and Building Engineer at Jingzhen Construction and Supervision Co.
  • Graduate Engineer at Reinertsen.


Read less
This course is aimed at those who wish to study advanced topics in mechanical engineering with a focus on materials. It's been developed to provide you with an in-depth technical understanding of advanced mechanical engineering topics. Read more

Why this course?

This course is aimed at those who wish to study advanced topics in mechanical engineering with a focus on materials.

It's been developed to provide you with an in-depth technical understanding of advanced mechanical engineering topics. You’ll also develop generic skills that allow you to contribute effectively in developing company capabilities.

The course is designed to make you more employable and also satisfies the Further Learning requirements necessary to obtain Chartered Engineer status.

This course is particularly suitable for graduate engineers in these sectors:
- chemical, petrochemical & process engineering
- design engineering
- power generation
- manufacturing
- oil & gas
- renewable energy

See the website https://www.strath.ac.uk/courses/postgraduatetaught/advancedmechanicalengineeringwithmaterials/

You’ll study

You’ll have the opportunity to select technical and specialist classes.

- Compulsory classes
You’ll study three compulsory classes:
- Engineering Composites
- Polymer & Polymer Composites
- Industrial Metallurgy

- Other specialist instructional modules
These focus on different technical aspects allowing you to tailor learning to your individual needs. When choosing technical modules, you’ll discuss the options with the course co-ordinator. These include:
- Pressurised Systems
- Aerodynamic Performance
- Aerodynamic Propulsion Systems
- Systems Engineering 1 & 2
- Machine Dynamics
- Machinery Diagnosis & Condition Monitoring
- Mathematical Modelling in Engineering Science
- Spaceflight Mechanics
- Advanced Topics in Fluid Systems Engineering
- Spaceflight Systems
- Advanced Boiler Technologies 1 & 2
- Materials for Power Plant
- Gas & Steam Turbines

- Faculty-wide generic instructional modules
You’ll choose three faculty-wide generic modules which satisfy the broader learning requirements for Chartered Engineer status. You'll choose from:
- Design Management
- Project Management
- Sustainability
- Information Management
- Finance
- Risk Management
-Environmental Impact Assessment
- Knowledge Engineering & Management for Engineers

- Individual project
MSc students take on an individual project which allows study of a selected topic in-depth. This may be an industry-themed project or one aligned to engineering research at Strathclyde.

Facilities

Our facilities include many laboratories and research centres including:
- Advanced Space Concepts Laboratory
- Energy Systems Research Unit
- Future Air-Space Transportation Technology
- James Weir Fluids Laboratory
- Mechanics & Materials Research Centre

We have local access to a 3500-node region supercomputer.

Accreditation

As this is a new course starting in 2014/15, accreditation by IMechE is expected (as has been obtained for the Advanced Mechanical Engineering course), after it has been operational for one year.

English language requirements for international students

IELTS - minimum overall band score of 6.5 (no individual test score below 5.5) or TOEFL iBT minimum total score of 95 (minimum scores of Listening-17, Writing-19, Reading and Speaking-20). Both tests are valid for two years.

Learning & teaching

Teaching methods include lectures and practical exercises. Site visits are also arranged.

Careers

Engineering graduates, particularly Mechanical Engineers, are in demand from recruiting companies. This course is designed to meet industrial demand for qualified staff in the area of Mechanical Engineering. This course is particularly suitable for Graduate Engineers in the following sectors:
- Chemical, Petrochemical & Process Engineering
- Design Engineering
- Power Generation
- Manufacturing
- Oil & Gas
- Renewable Energy

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/

Read less
The Faculty of Engineering runs a multi-disciplinary postgraduate course entitled Sustainable Engineering with a number of different themes, one of which is offshore renewable energy. Read more

Why this course?

The Faculty of Engineering runs a multi-disciplinary postgraduate course entitled Sustainable Engineering with a number of different themes, one of which is offshore renewable energy.

This flexible programme combines study in specialist, advanced engineering technologies underpinned with training in sustainability. The programme has been developed with direct industrial involvement to provide you with a solid understanding of modern, sustainable engineering. As well as gaining an understanding of how sustainable engineering applies to offshore renewable energy, this programme will also provide you with key transferable skills to aid your employability.

The course is designed for experienced or newly qualified engineers in:
- Naval Architecture
- Marine Engineering
- Mechanical Engineering
- Civil Engineering
- Electrical Engineering or related disciplines

The Department of Naval Architecture, Ocean & Marine Engineering, a leading institution in Scotland, offers excellent teaching and research facilities in naval architecture, ocean and marine engineering, which expands your career opportunities in naval architecture, marine, offshore oil and gas industry.

See the website https://www.strath.ac.uk/courses/postgraduatetaught/sustainableengineeringoffshorerenewableenergy/

You’ll study

Studying at least three generic classes will meet the key requirements to attain Chartered Engineer status.

You must take three specialist classes if you are studying for the Postgraduate Certificate and up to five if you are studying for a Postgraduate Diploma or MSc.

Successful completion of six classes leads to the award of a Postgraduate Certificate.

- Group project
You’ll work with a group of students from different pathways of the Sustainable Engineering programme. You’ll produce sustainable solutions to real-life industry problems. This project will include site visits, field trips and progress reports to industry partners.
Successful completion of eight modules and the group project leads to the award of a Postgraduate Diploma.

- Individual project
MSc students will study a selected topic in depth and submit a thesis.
Successful completion of eight classes, the group project and an individual project leads to the award of an MSc.

Facilities

We have excellent teaching facilities including:
- Catalina - our departmental racing yacht
- Kelvin Hydrodynamics Lab - the largest ship-model experiment tank in any UK university
- Towing/wave tank exclusively for teaching purposes
- Marine engine laboratory
- Hydrogen fuel cell laboratory
- Cutting-edge computer facilities
- Industry standard software

Studying at least three generic modules will meet the key requirements to attain Chartered Engineer status.

Student competitions

Naval Architecture, Ocean & Marine Engineering supports and promotes students in various competitions and awards, from cash bursaries for top performing students to the highest of awards from international organisations.

In recent years our students have been triumphant in the following high profile competitions:
- Science, Engineering & Technology Student of the Year (SET Awards)
- Best Maritime Technology Student (SET Awards)
- Double winner of BP’s Ultimate Field Trip Competition
- Strathclyder of the Year

Pre-Masters preparation course

The Pre-Masters Programme is a preparation course for international students (non EU/UK) who do not meet the entry requirements for a Masters degree at University of Strathclyde. The Pre-Masters programme provides progression to a number of degree options.

To find out more about the courses and opportunities on offer visit isc.strath.ac.uk or call today on +44 (0) 1273 339333 and discuss your education future. You can also complete the online application form. To ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers today.

Learning & teaching

There are two teaching periods (semesters) of 12 weeks each. The first semester is usually from the beginning of October and the second semester starts at the end of January.
Some of the second semester subjects are taught over eight weeks so that you can devote as much time as possible to your individual project work.
Each year about 15 experts from the industry give talks and seminars on wide-ranging topics. Industrial visits are made to a variety of companies.
You’re required to attend an induction prior to the start of the course.

Assessment

There are two types of method for module assessment. One is course work assessment only, the other is examination assessment. For examined modules the final assessment mark consists of 30-40% course work and 60-70% examination

Careers

- Where are they now?
100% of our graduates are in work or further study.*

Job titles include:
- Graduate Design Engineer
- Project Engineer
- Renewable Energy Consultant
- Thermal Performance Engineer

Employers include:
- Arup
- Eaton
- Esteyco Energua
- Granite Services International
- Moorfield International
- Mott Macdonald

*Based on the results of the national Destinations of Leavers from Higher Education Survey (2010/11 and 2011/12).

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/index.jsp

Read less
This Masters programme is aimed at engineering graduates aspiring to senior level positions in large manufacturing or service provider organisations, or as part of an engineering supply chain. Read more
This Masters programme is aimed at engineering graduates aspiring to senior level positions in large manufacturing or service provider organisations, or as part of an engineering supply chain. Graduates from related disciplines can embrace engineering continuous improvement, operations management and enterprise requirement planning (ERP) applications in engineering.

About the programme

In many engineering organisations ERP is the main software system application that controls and assists in the management of all functional departments and the whole facility, often globally. This unique programme has a UK and global appeal for career development and future plans are currently being developed to offer SAP ERP certification. It satisfies both the operations management and continuous improvement (CI) elements within engineering, and the application of ERP systems such as SAP and/or Oracle. Many companies use ERP within the supply chain including Terex, Tata Steels, RollsRoyce, Honeywell, Audi, and BMW.

This programme will develop the skills you need to interface with functional users, other than engineers, giving you an informed view for further configuration or customisation.

Your learning

Core topics include ERP, continuous improvement and operations management with options of Total Productive Maintenance (TPM), Project Management and modules with further planning and management of resources.

Our lecturers are seasoned industry experts, and we complement their knowledge with industry visits to determine the effectiveness of various applications.

MSc students undertake a dissertation, selecting a specialism to achieve a greater understanding of the implementation and advanced use of software applications, management initiatives and planning within an engineering setting. There may be scope to integrate this dissertation with industry, where an engineering supervisor will be allocated to assist your MSc journey and to advise and introduce you to industry links.

Our Careers Adviser says

Graduates are equipped for the next step in their career in manufacturing and service operations. Most business organisations that implement ERP solutions use fully-trained, qualified implementation partners and consultants throughout their lifecycle.

There is demand for graduates who have had some initial education and training and hands-on experience in ERP solutions such as SAP. Businesses, ERP solution providers, and consulting organisations require top calibre trained ERP consultants and users. UWS graduates who are trained in ERP and supporting materials will possess a unique skill-set that will be a differentiator when competing in the employment market.

Professional recognition

We will seek accreditation for this programme in the near future from the Institution of Engineering and Technology (IET).

Industry-standard facilities

Our recently upgraded facilities will ensure you’re equipped to deal with the requirements of industry:
• Recent investment in new laboratories for engineering and physics will further enhance our reputation for applied interdisciplinary research
• Paisley Campus – fully equipped manufacturing workshop; materials testing and analysis facilities; metrology laboratory; rapid prototyping centre; and assembly and welding laboratories
• Significant investment in facilities for thin film technologies, micro-scale sensors and nuclear physics research
• Lanarkshire Campus – £2.1 million engineering centre, with particular focus on the design and engineering disciplines opened in 2008
• Both Lanarkshire and Paisley campuses have modern, dedicated IT facilities utilising a range of industrial applications software such as PRO/Engineer, Ansys, Fluent, WITNESS and MS Project.

Read less
This course was introduced last year and is aimed at students who want to study advanced topics in mechanical engineering with a focus on power plant technologies. Read more

Why this course?

This course was introduced last year and is aimed at students who want to study advanced topics in mechanical engineering with a focus on power plant technologies.

It provides mechanical engineering graduates with an in-depth technical understanding of advanced mechanical engineering topics relevant to the power generation industry. You’ll also develop generic skills that allow you to contribute effectively in developing company capabilities.

The course helps to make you more employable and also satisfies the further learning requirements necessary to obtain Chartered Engineer status.

See the website https://www.strath.ac.uk/courses/postgraduatetaught/advancedmechanicalengineeringwithpowerplanttechnologies/

You’ll study

You’ll have the opportunity to select technical and specialist classes.

- Compulsory modules
You’ll study three compulsory modules:
- Gas & Steam Turbines
- Advanced Boiler Technologies 1
- Power Plant Systems

- Other specialist instructional modules
These focus on different technical aspects allowing you to tailor learning to your individual needs. When choosing technical modules, you’ll discuss the options with the course co-ordinator. These options include:
- Ceramic & Polymer Engineering; Engineering Composites
- Metals & Alloys
- Light Weight Structures
- Machine Dynamics
- Mathematical Modelling in Engineering Science
- Pressurised Systems
- Systems Engineering 1 & 2
- Polymer & Polymer Composites
- Industrial Metallurgy

- Faculty-wide generic instructional modules
You’ll choose three faculty-wide generic modules which satisfy the broader learning requirements for Chartered Engineer status. You'll choose from:
- Design Management
- Project Management
- Sustainability
- Information Management
- Finance
- Risk Management
- Environmental Impact Assessment
- Knowledge Engineering & Management for Engineers

- Individual project
MSc students take on an individual project which allows study of a selected topic in-depth. This may be an industry-themed project or one aligned to engineering research at Strathclyde.

Facilities

Our facilities include many laboratories and research centres including:
- Advanced Space Concepts Laboratory
- Energy Systems Research Unit
- Future Air-Space Transportation Technology
- James Weir Fluids Laboratory
- Mechanics & Materials Research Centre

We have local access to a 3500-node region supercomputer.

Accreditation

As this is a new course starting in 2014/15, accreditation by IMechE is expected (as has been obtained for the Advanced Mechanical Engineering course), after it has been operational for one year.

English language requirements for international students

IELTS - minimum overall band score of 6.5 (no individual test score below 5.5).

Pre-Masters preparation course

The Pre-Masters Programme is a preparation course for international students (non EU/UK) who do not meet the entry requirements for a Masters degree at University of Strathclyde. The Pre-Masters programme provides progression to a number of degree options.

To find out more about the courses and opportunities on offer visit isc.strath.ac.uk or call today on +44 (0) 1273 339333 and discuss your education future. You can also complete the online application form. To ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers today.

Learning & teaching

Students take three compulsory modules and a selection of specialist and generic modules.
To qualify for the MSc, students undertake an individual project which allows study of a selected topic in depth, normally industry-themed or aligned to engineering research at Strathclyde.

Assessment

Assessment is by written assignments, exams and the individual project.

Careers

This course is particularly suitable for graduate engineers in these sectors:
- chemical, petrochemical & process engineering
- design engineering
- power generation
- manufacturing
- oil & gas

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/

Read less

Show 10 15 30 per page



Cookie Policy    X