• University of Derby Online Learning Featured Masters Courses
  • University of Oxford Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • University of Southampton Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Goldsmiths, University of London Featured Masters Courses
Middlesex University Featured Masters Courses
University of Reading Featured Masters Courses
Vlerick Business School Featured Masters Courses
Coventry University Featured Masters Courses
University of Surrey Featured Masters Courses
0 miles
Engineering×

Heriot-Watt University, Full Time MSc Degrees in Engineering

We have 15 Heriot-Watt University, Full Time MSc Degrees in Engineering

  • Engineering×
  • Heriot-Watt University×
  • MSc×
  • Full Time×
  • clear all
Showing 1 to 15 of 15
Order by 
The MSc in Petroleum Engineering is designed to equip students with the knowledge and skills to tackle the oil and gas industry’s most challenging problems. Read more

The MSc in Petroleum Engineering is designed to equip students with the knowledge and skills to tackle the oil and gas industry’s most challenging problems. Upon graduating students will be able to understand, frame and solve the most complex of upstream problems in today’s petroleum industry.

These courses provide specialist education tailored to the requirements of the upstream petroleum industry. The relevance of this education, combined with careful selection of candidates, has encouraged oil and oilfield service companies to target Heriot-Watt for recruitment of graduates since 1976.

The Petroleum Engineering degree is delivered by the Institute of Petroleum Engineering, a world-leading Institute committed to delivering research and training programmes that meet the needs of the international petroleum industry. Students have been attending the Institute of Petroleum Engineering at Heriot-Watt University to study for the MSc programme in Petroleum Engineering since 1975.

Course details

The MSc in Petroleum Engineering is a programme of lectures and project work, encompassing a wide range of petroleum engineering fundamentals, relevant to the current petroleum engineering industry.

Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The courses on this programme are applied in nature and have been specifically designed so that our students are technically well prepared for, and have a sound knowledge of, the industry.

English language requirements

If your first language is not English, or your first degree was not taught in English, we’ll need to see evidence of your English language ability. The minimum requirement for English language is IELTS 6.5 or equivalent.

We offer a range of English language courses



Read less
The MSc/Diploma in Structural and Foundation Engineering is designed for graduates and practising engineers who wish to improve their knowledge of structural and foundation engineering. Read more

Programme Background

The MSc/Diploma in Structural and Foundation Engineering is designed for graduates and practising engineers who wish to improve their knowledge of structural and foundation engineering. The structure and content of the programme has been carefully designed following liaison with a wide range of employers in the sector.

The staff members who deliver the programme have wide ranging expertise in specialist subjects which include reinforced concrete technology, dynamic and impact testing of materials, offshore engineering, structural safety, soil-structure interaction and numerical modelling.

The research activities of the programme involve combinations of experimental, numerical and theoretical work. The School has excellent practical facilities for static, dynamic, and impact testing and it has access to advanced computer and networking facilities that include a state-of-the-art parallel processing computer.

Professional Recognition

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) or an accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. See http://www.jbm.org.uk for further information.

Programme Content

The curriculum covers the specialist technical and computational skills necessary for today’s construction industry and therefore offers excellent preparation for employment across an industry that includes consulting and contracting engineers, public authorities and local government. In addition, the programme also provides a suitable springboard for graduates seeking a career in a research lead environment.

Both MSc and Diploma students undertake the eight taught courses listed below. MSc students also complete a Masters dissertation.

Semester 1:
Indeterminate Structures
Stability and Dynamics
Ground Engineering
FEA & Stress Analysis A

Semester 2:
Safety, Risk and Reliability
Earthquake Engineering
Foundation Engineering
FEA & Stress Analysis B

Dissertation

MSc students are also required to submit a research dissertation, the research topic normally aligns with the research interests of the staff in the School but can be tailored to suit the interests of the student or student’s employer. Distance learning and part time students are encouraged to suggest project topics based on their own work experience.

At the discretion of the Programme Leader, MSc students may choose to nominate a research project which enables them to investigate a problem they have encountered in their workplace or elsewhere. The research project can be undertaken in conjunction with a suitable industrial partner on campus or in industry if the industrial partner has the facilities to provide adequate supervision.

Mode of Study

The programme may be studied on a part-time basis and will therefore appeal to practising engineers. It is also delivered via distance learning which enables students from all around the globe to study without the need to interrupt their career and travel to Scotland. Examinations may be organised in each student’s country of residence to avoid unnecessary travel costs.

Read less
This programme aims to develop the knowledge and skills of a Bachelor’s-level graduate Mechanical Engineering to Masters level through advanced teaching, design work and research. Read more

This programme aims to develop the knowledge and skills of a Bachelor’s-level graduate Mechanical Engineering to Masters level through advanced teaching, design work and research. It provides an opportunity for candidates from a different Engineering background to develop key Mechanical Engineering knowledge and skills required for their professional development. A key objective of the programme is to be an accredited route to becoming a Chartered Engineer.

This programme makes use of Masters-level courses in the Energy Sciences and Manufacture and Design complemented with specialist courses from relevant MSc courses offered by the Institute. There is a growing need for an advanced mechanical engineering programme from our industry partners and this programme has been specifically developed to meet this need and to encourage students into further learning.

The Scottish Funding Council has made available 20 scholarships covering fees only to students with Scottish backgrounds. Six of these places are reserved for applicants to this programme in the first instance. The remaining places are spread over all our Energy based MSc programmes. There is no separate application process for this. If you are eligible, you will be considered automatically. You will be notified through the summer if you have been selected



Read less
Modern civil engineering professionals often require an extensive understanding of construction management due to the strategic benefits it can bring to both individuals and project teams. Read more

Modern civil engineering professionals often require an extensive understanding of construction management due to the strategic benefits it can bring to both individuals and project teams.

As the industry becomes more competitive, organisations and their clients are increasingly demanding the combined time, cost and quality assurances that good project management practice provides. Furthermore, the industry now recognises that there is a need for engineers to gain specialist technical knowledge which compliments their academic and professional background.

The programme uses experience from our internationally recognised Construction Project Management programme and combines it with our high-profile Civil Engineering postgraduate programme to provide a broad and valuable education. As a result, our recent graduates have been employed by a range of both national and international employers.

Our students and graduates

Our students are recruited mainly from the civil engineering profession and are typically looking to broaden their knowledge base, extend their technical expertise or gain further learning to meet the needs of the professional institutions. Applicants from other backgrounds planning to develop a career in civil engineering and construction management will also be considered. Graduates of this programme are much sought after by employers, working in areas such as transport, water and wastewater engineering and the energy sector.



Read less
Building Services Engineers design strategies and technology that make buildings work for us in today’s fast-paced, ecologically responsible and cost-driven construction industry. Read more
Building Services Engineers design strategies and technology that make buildings work for us in today’s fast-paced, ecologically responsible and cost-driven construction industry. It is an exciting, broad-based and challenging profession and the role is evolving and expanding today at an unprecedented rate.

Our Building Services Engineering Programme considers low carbon building design, passive and active strategies for efficiency and wellbeing, and the integration of renewable energy systems into buildings. It deals with services engineering issues, building the multidisciplinary skills required to cope with the challenges in services design and implementation which will be experienced in the working environment. As a conversion course, it provides students with the best foundation for launching or accelerating a career as a Building Services Engineer, or technical sustainability consultant. These are critical roles in interdisciplinary design teams, and as a consequence rank among the highest paid built environment professionals with rapid career advancement opportunities.

The scope of our programme has unprecedented flexibility inbuilt, to allow you to focus on areas of particular interest to you, and your career development, through your individual course choices.

Professional Development and Recognition

The programme meets the professional development needs as specified by the Engineering Council (ECUK) and relevant engineering institutions in the UK Standard for Professional Engineering Competence (UK-SPEC).

It allows graduates at either Diploma or MSc level to achieve a qualification equivalent to an MEng which will therefore gain professional recognition by the Chartered Institute of Building Services Engineers (CIBSE) and the Energy Institute (EI). The programme does this by providing:

• learning which contributes to the educational requirement for CEng;
• design tasks undertaken to an acceptable standard;
• development of transferable skills appropriate to professional practice.

Flexible Study Options

This programme can be studied full-time, part-time or via Independent Distance Learning (IDL), ideal for those in employment or with other commitments, providing flexible study options that fit around work or family. As an IDL student you will not be required to attend any lectures, tutorials or other events at any of Heriot-Watt University’s campuses, and you can also arrange to sit examinations in a location close to you.

Those who are close to our Dubai Campus will, in addition, benefit from our local support in the form of dissertation supervision and access to licensed software programmes and subscribed literatures, depending on availability.

Programme Content

Students undertake eight taught courses for the Diploma plus the research dissertation for the MSc. Students can opt to complete a total of four courses and graduate with the Heriot Watt University Postgraduate Certificate.

The taught element of the programme comprises 8 courses, with five core courses and three optional courses out of eight available alternatives:

Semester 1

• Building Electrical and Lighting Services (core)
• Ventilation and Air Conditioning (core)
• Contracts and Procurement (optional)
• Water Conservation (optional)
• Sustainable Design and Development (optional)
• Climate Change, Sustainability & Adaptation (optional)

Semester 2

• Thermofluids (core)
• Human Factors (core)
• Architectural Acoustics (optional)
• People and Organisational Management for the Built Environment (optional)
• Energy Systems and Buildings (optional)
• Carbon Footprinting (optional)
• Low Carbon Buildings (core)

English language requirements

If English is not the applicant’s first language a minimum of IELTS 6.5 or equivalent is required with all elements passed at 6.0 or above.

Applicants who have previously successfully completed programmes delivered in the medium of English language may be considered and will be required to provide documentary evidence of this. Examples would be secondary school education or undergraduate degree programme. A minimum of at least one year of full time study (or equivalent) in the medium of English language will be required.

We offer a range of English language courses to help you meet the English language requirement prior to starting your masters programme, please visit: http://www.hw.ac.uk/study/english.htm

Read less
This is an advanced, specialist programme in the rapidly expanding area of renewable energy engineering with a clear Mechanical Engineering focus. Read more

This is an advanced, specialist programme in the rapidly expanding area of renewable energy engineering with a clear Mechanical Engineering focus. The programme is aimed at students wishing to develop critical understanding of the significant changes afoot in the energy system due to the development and integration of wind, marine, biomass and solar technologies. The programme will enable graduates to develop and implement creative solutions to the problems encountered in renewable energy capture, conversion, storage and management.

Students will gain the knowledge and skills to assess renewable energy resources, design appropriate renewable energy systems, evaluate the performance of these systems and assess the wider impacts of renewable energy development. The programme provides introductory courses to fundamental energy science and current energy issues, while the project-led courses focus on the design of renewable energy systems. The programme concludes with a research-led dissertation in the summer.

Renewable energy research focuses on six main areas:

  • Photovoltaics and Solar Energy
  • Wind and Marine Energy
  • Renewable Energy Systems
  • Minimising CO2 Emissions
  • Biofuels
  • Wind and Marine Energy


Read less
This Masters in Sustainable Engineering will let you assess sustainability issues and formulate strategies to implement practical solutions in business and society. Read more

This Masters in Sustainable Engineering will let you assess sustainability issues and formulate strategies to implement practical solutions in business and society. The course aims to produce Sustainability Engineers who can make optimum use of energy and materials – embracing concepts such as life-cycle analysis and recycling within the design process.

The course has been developed together with industry and covers a practical framework to meet the challenge of responsibly using the world’s finite natural resources. This includes narrowing the ‘sustainable gap’ and developing an awareness of environmental degradation.

As part of the Masters in Sustainable Engineering dissertation, you’ll undertake ‘in-house’ laboratory-based projects. You’ll also be able to take environmental management system assessments or technical design analyses within companies too. These include William Grant & Sons, Caledonian Alloys, United Wire Ltd, and the Scottish Environmental Protection Agency.



Read less
Oil and gas remains one of our major energy resources and the recovery of these resources is increasingly important, just as it was in the last century. Read more

Overview

Oil and gas remains one of our major energy resources and the recovery of these resources is increasingly important, just as it was in the last century. What has changed with time is the need to recover more of the reservoir, operating in harsher environments both physically and economically. Equally there are challenges due to changes in knowledge and the relative lack of experience from engineers in the market. Traditionally in the UK, the vast majority of engineers entering the industry do so through two routes; first as facilities or surface engineers - chemical and process, mechanical and electrical engineering working on the processing systems to stabilise fluid from the reservoir. The second route is through the petroleum engineering or sub-surface engineering route which sees engineers develop knowledge and skills necessary to locate, drill and extract oil and gas reserves.

This programme (See http://www.postgraduate.hw.ac.uk/prog/msc-oilandgas-technology/ ) was been designed with the help of the industry to provide a cross over between surface and sub-surface engineering functions with the intent that future oil and gas operations can be better optimised to enhance recovery of the reserves. In order to maximise recovery, surface engineers in an operating company must communicate effectively with the reservoir and production engineers within their own company as well as develop relationships with and assess the work of contractors and vendors when designing and constructing facilities. Therefore, surface engineers need to be competent not only in the areas of process design, pipeline engineering, but also be familiar with reservoir engineering, production technology and a variety of other engineering and management subjects, such as safety and control, management of projects, economics and planning, etc.

The programme contains 8 taught courses covering key topics in surface and sub-surface engineering. Two projects towards the end of the programme provide opportunities for participants to demonstrate their knowledge in the design of a surface facility, and to study a specific topic of interest.

Scholarships available

We have a number of fully funded Scottish Funding Council (SFC) scholarships available for students resident in Scotland applying for Oil and Gas Technology. Find out more about this scholarship and how to apply http://www.hw.ac.uk/student-life/scholarships/postgraduate-funded-places.htm .

Programme content

For the MSc and PGDip degrees, students are required to take eight taught courses. MSc students then complete the programme by undertaking two 30 credit projects.

Find more information on programme content here http://www.postgraduate.hw.ac.uk/prog/msc-oilandgas-technology/

English language requirements

If you are not from a UKBA recognised English speaking country, we will need to see evidence of your English language ability. If your first degree was taught in English a letter from them confirming this will be sufficient. Otherwise the minimum requirement for English language is IELTS 6.5 or equivalent, with a minimum of 5.5 in each skill.

The University offers a range English language courses (See http://www.hw.ac.uk/study/english.htm ) to help you meet the English language requirement prior to starting your masters programme:
- 14 weeks English (for IELTS of 5.5 with no more than one skill at 4.5);
- 10 weeks English (for IELTS of 5.5 with minimum of 5.0 in all skills);
- 6 weeks English (for IELTS 5.5 with minimum of 5.5 in reading & writing and minimum of 5.0 in speaking & listening)
- 3 weeks English refreshers course (for students who meet the English condition for the MSc but wish to refresh their English skills prior to starting).

Find information on Fees and Scholarships here http://www.postgraduate.hw.ac.uk/prog/msc-oilandgas-technology/

Read less
The Applied Petroleum Geoscience programme is a unique programme in subsurface geoscience and exploration at Heriot-Watt University. Read more
The Applied Petroleum Geoscience programme is a unique programme in subsurface geoscience and exploration at Heriot-Watt University.

This year-long MSc mainly focuses on petroleum geoscience, but it is closely linked with other MSc programmes and research groups in petroleum engineering and reservoir geology at Heriot-Watt's Institute of Petroleum Engineering. The programme is also applicable to non-petroleum subsurface geoscience subjects, such as CO2 storage and groundwater flow.

More information about the MSc is available in Heriot-Watt's online prospectus: http://www.postgraduate.hw.ac.uk/prog/msc-petroleum-geoscience-petgeo-/

About the programme

The MSc in Applied Petroleum Geoscience provides students with a thorough training in aspects of subsurface geology, geophysics and geo-engineering, relating to the exploration, appraisal and development of subsurface resources.

Although the programme mainly focuses on exploration for hydrocarbon resources, and delineation of hydrocarbon reservoirs in the subsurface, the skills and knowledge learned in this subject are applicable to all subsurface geoscience areas, including groundwater exploration, waste disposal or CO2 sequestration.

Project work, both as groups and individually is part of the programme. Two fieldtrips are also a permanent part of the course.

Topics covered:
=============
• Reservoir Concepts
• Petroleum Basins
• Formation Evaluation
• Reservoir Sedimentology
• Geomechanics and Flow Mechanics
• Petroleum Systems Analysis
• Petroleum Geophysics
• Stratigraphy and Reservoir Quality

For more information on the programme content, including course descriptions, please visit: https://www.hw.ac.uk/study/uk/postgraduate/petroleum-geoscience-petgeo.htm

Professional recognition

The Applied Petroleum Geoscience MSc is accredited by the Institute of Materials, Minerals and Mining (IOM3) and Energy Institute (EI).

Career opportunities

Recent graduates of the Applied Petroleum Geoscience MSc have gone into further research or to work in geoscience departments of major oil and gas companies as well as industry service organisations, contractors and small local companies. Companies who have employed some of the past students include Shell and Petroceltic here in the UK, and a number of other companies worldwide including Tullow, GNPC, and Total.

English language requirements

If your first language is not English, or your first degree was not taught in English, we’ll need to see evidence of your English language ability. The minimum requirement for English language is IELTS 6.5 or equivalent.

We offer a range of English language courses: http://www.hw.ac.uk/study/english.htm

Read less
This is an advanced MSc course in the rapidly expanding area of mobile communications and networks. This course is concerned with the concepts, applications, design, development and deployment of mobile communication systems and networks. Read more
This is an advanced MSc course in the rapidly expanding area of mobile communications and networks. This course is concerned with the concepts, applications, design, development and deployment of mobile communication systems and networks. Students will develop a detailed knowledge and critical understanding of the core skills in mobile communications and networks and use a significant range of principal and specialist skills, techniques and practices in the domain of mobile communications and networks. The course will provide a stream of graduates of a calibre capable of developing and implementing creative solutions to the problems encountered in mobile communication systems and networks.

This is a hardware-oriented course and is aimed directly at electrical engineering graduates.

Core Subject Areas
•Digital Signal Processing
•Digital Design
•Networks and Communications
•Research Methods Critical Analysis and Project Planning
•Principles of Mobile Communications
•RF Mobile Communication Systems
•Project Phase 1
•MSc Project
.Optional Subject Areas
•Software Engineering 2
•Network Applications
.
Heriot-Watt University is set in almost 400 acres of woodland, making it one of the most beautiful places to study and live. Less than ten miles and a 15-minute bus ride into the centre of Edinburgh, its proximity to this architecturally famous city only adds to its appeal.

Edinburgh is renowned as a centre of learning and discovery; studying and living here is a stimulating and inspirational experience. It offers a unique city environment. It's culturally diverse, historically significant, socially alive, environmentally aware, politically central and visually stunning. The centre of Edinburgh has been awarded UNESCO World Heritage Site status in recognition of its stunning urban landscape in the medieval Old Town and the Georgian New Town. In addition, the city encompasses some striking modern architecture including the parliament building and the Museum of Scotland.

To top it all, Edinburgh is lucky to have significant and magnificent green spaces: the impressive extinct volcano, Arthur's Seat, and its associated park, lie at the heart of the city. If that wasn't enough, Edinburgh has 112 public parks and more trees per person than any other British city.

You're also within easy striking distance of some of the world's most beautiful wild landscapes, from the Trossachs in the west and the Highlands in the north, to the Borders in the south.

Read less
Our Robotics degree offers a cross-disciplinary course on a subject that could revolutionise society in the next 20 years. It’s aimed at graduates with a good first degree in areas like Electrical and Electronic Engineering, Computer Science and Mechanical Engineering. Read more

Our Robotics degree offers a cross-disciplinary course on a subject that could revolutionise society in the next 20 years. It’s aimed at graduates with a good first degree in areas like Electrical and Electronic Engineering, Computer Science and Mechanical Engineering. The course is designed to help you develop your skills in specific aspects of robotic systems.

This robotics course is both theoretical and practical, aiming to give you the knowledge and skills you’ll need for international employment in this expanding and economically relevant area.You can also go onto further study at the EPSRC Robotics and Autonomous Systems Centre for Doctoral Training.



Read less
The Oil and Gas Innovation MSc is a project-led masters programme which will equip students with the skills and competencies to generate and commercialise innovations for the oil and gas industry. Read more
The Oil and Gas Innovation MSc is a project-led masters programme which will equip students with the skills and competencies to generate and commercialise innovations for the oil and gas industry.

The programme is a collaboration between the Oil & Gas Innovation Centre (OGIC) and a range of Scottish Universities, including the University of Aberdeen (lead), Heriot-Watt, Strathclyde University, University of St Andrews, Glasgow Caledonian University, University of the Highlands and Islands and Robert Gordon University to develop new technologies in exploration, production and decommissioning.

The collaborative nature of this programme means that in addition to courses at Heriot-Watt's Institute of Petroleum Engineering, students will also take modules at the University of Aberdeen and the University of Strathclyde giving them the unique opportunity to benefit from the oil and gas expertise available at each of these three institutions.

Our students

The Oil and Gas Innovation MSc by Research is aimed at:

• Technical staff who have identified an innovation or have expertise likely to yield innovative solutions and want to learn how to commercialise these.
• Business developers who have identified an opportunity to innovate in the oil and gas sector and seek to understand the framework of the industry and its supply chain.
• Managers or technical staff who are seeking innovative solutions for their challenges and want to equip themselves with the knowledge and leadership skills to enable their companies to identify, validate and commercialise possible solutions.
• Graduates in engineering or science, who have the qualities and ideas required to become leaders in innovation.

About the programme

This research-led MSc will include courses taken at Heriot-Watt University, the University of Aberdeen and the University of Strathclyde.

The project in Oil and Gas Innovation (75% of the degree) can be completed in a company or university.

Topics covered:
=============
• Business Essentials for Innovators (University of Strathclyde) - 10 credits
• Product Development (University of Strathclyde) - 5 credits
• Commercialising Innovation (University of Aberdeen) - 15 credits
• Technical Elective (Heriot-Watt)
• Project Scoping (Heriot-Watt)
• Project in Oil and Gas Innovation (Heriot-Watt) - 120 credits

English language requirements

If your first language is not English, or your first degree was not taught in English, we’ll need to see evidence of your English language ability. The minimum requirement for English language is IELTS 6.5 or equivalent.

We offer a range of English language courses: http://www.hw.ac.uk/study/english.htm

Read less
The Flexible Advanced Masters in Energy (FLAME) is a new concept in British postgraduate courses. It is built on the prinicple of maximum flexibility to ensure that you as a student will benefit most from it. Read more
The Flexible Advanced Masters in Energy (FLAME) is a new concept in British postgraduate courses. It is built on the prinicple of maximum flexibility to ensure that you as a student will benefit most from it. The content ranges from the energy resources, through power generation, to energy use in industry and buildings. This can be combined with MBA business modules to provide training for recent graduates as well as for experienced and established engineers working in the industry or other organisations.

We have designed the course so that you can choose
- Full-time or part-time attendance in Edinburgh or by distance-learning
- An MSc, a Postgraduate Diploma, a Postgraduate Certificate, and even individual modules.
- A mix of technical modules and business modules from the Edinburgh School of Business's MBA course
- Modules from a broad range of Energy-related subjects

Only two modules are compulsory. The remaining optional modules cover the thematic areas of
- Energy Resources
- Power generation
- Process Engineering
- Energy in Buildings
- The Environment
- Safety

EPSRC studentships for full-time study for British and EU citizens are available.

Read less
This Embedded Systems course offers a natural follow-up to an undergraduate degree in electrical and electronic engineering. It concentrates on the rapidly expanding area of embedded digital systems for communication and control. Read more

This Embedded Systems course offers a natural follow-up to an undergraduate degree in electrical and electronic engineering. It concentrates on the rapidly expanding area of embedded digital systems for communication and control. The course is relevant to industry and offers good preparation for a career in research. It’ll also help you develop a detailed knowledge of the core skills in embedded systems – whilst developing specialist techniques and practices in embedded systems.

On our Embedded Systems course, you’ll work with peers and staff, developing a good level of autonomy and responsibility. You’ll also be able to apply your knowledge to complex applications, critically review existing practice, and develop creative solutions in the field.



Read less
Energy – based on fossil fuels and, increasingly, renewables – is an essential component of our existence. Read more

Energy – based on fossil fuels and, increasingly, renewables – is an essential component of our existence. The cost, availability and efficient utilisation of energy are increasingly strong focal points in the strategies of governments world-wide, as they realise that the 'raw material' for most of the energy used today has a finite life.

Large industries and small households alike depend on a reliable provision of energy. Energy includes not only electricity, but also heat and transportation. The programme will make you aware of the relationship between demand and supply of energy, a relationship that consists of much more than its technical component. It includes political, economic and social issues and has to be viewed on a global as well as a local scale with respect to energy provision, consumption and the costs it might incur – both in the monetary as well as environmental terms.



Read less

  • 1
Show 10 15 30 per page



Cookie Policy    X