• Swansea University Featured Masters Courses
  • University of Southampton Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Goldsmiths, University of London Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Ross University School of Veterinary Medicine Featured Masters Courses
  • Anglia Ruskin University Featured Masters Courses
Middlesex University Featured Masters Courses
Barcelona Technology school Featured Masters Courses
Bocconi University Featured Masters Courses
University of Manchester Featured Masters Courses
University of Glasgow Featured Masters Courses
0 miles
Materials Science×

University of Wales, Trinity Saint David, Full Time Masters Degrees in Materials Science

We have 2 University of Wales, Trinity Saint David, Full Time Masters Degrees in Materials Science

  • Materials Science×
  • University of Wales, Trinity Saint David×
  • Full Time×
  • clear all
Showing 1 to 2 of 2
Order by 
The course philosophy is that of experimentation, offering a challenge to conventional notions of medium - specificity in order to properly facilitate your ‘style' of expression and your inherent interests. Read more
The course philosophy is that of experimentation, offering a challenge to conventional notions of medium - specificity in order to properly facilitate your ‘style' of expression and your inherent interests.

Course Overview

MA Textiles within the Contemporary Dialogues portfolio offers an exciting and innovative re-thinking of Postgraduate provision that reflects the strategic thinking of Swansea College of Art. The portfolio facilitates migration between diverse thematic disciplines, exploring new ideas and conceptual approaches to allow young artists and designers to confront the issues that face society today and into the future.

The portfolio’s ethos of collaborative dialogues through material practices provides an innovative model of design, fine and applied arts education. This development allows students from all pathways to experience and share creative practices and innovative mind-sets through inter-disciplinary and trans-disciplinary dialogues. This ethos is enhanced within each programme to stimulate ‘collaborative’ practices and experimentation across a broader spectrum of specialist fields, developing graduates with the contextual awareness, creative thinking and technical skills to operate at the forefront of their discipline.

During the course of your studies you will be supported by specialist staff, leading professionals and practicing artists through lectures, seminars, workshops and tutorials. We have exceptional traditional and digital facilities, housed in spacious purpose-build workshops. Through these, we encourage creative freedom within all of our students and support you in challenging conventional thinking and established practices and facilitate new technological advances across a broad range of disciplines. We have found that through collaborative experimentation and innovative design thinking our students are able to produce work that meets the challenges and respond to the demands of the 21st century.

Facilities include:
-Firing kilns for glass and ceramics
-Printmaking, Screen Printing and Digital Textile Technologies
-Traditional and Digital Stitch
-Wood, Metal, Clay
-Cutting Etching and Engraving Technologies - Waterjet, Laser, Plotter
-3D Printing and CNC
-Chemical and Digital Darkrooms
-Specialist computer facilities with commercial standard software

Modules

-Collaborative Dialogues (20 credits)
-Co-Existent Perspectives (20 credits)
-The Thought Experiment (20 credits)
-Explorative Research Praxis (60 credits)
-Confirmative Praxis (60 credits)

Key Features

Students use the Masters Programme for all kinds of reasons; to gain an extra qualification, to achieve a higher and more sophisticated level of practice, as well as to have supported research and development time in order to elevate themselves to a more professional plateau with their artwork. Students from the Masters Programme have gone on to many varied careers in teaching and lecturing positions, in community arts and the cultural industries in general. Lots have continued to practice as artists and some have progressed to PhD study.

The programme has access to well equipped workshops including a resin, plaster, wood, metal and ceramic.
Beyond this specialist equipment, you will also have access to an extensive range of facilities including an excellent library, open-access computer suits and workshops in other areas within the art school. 
We currently have two research centres within the faculty.These research centres provide staff with research opportunities and access to high technology resources, they provide students with placement opportunity whilst also developing the creative industries infrastructure in the region, which will benefit graduating students.

CIRIC The Creative Industries Research and Innovation Centre was established in 2005 and is a knowledge transfer centre for projects that support the creative industries in Wales.

Current projects include Moving Image Wales, which supports the digital media industry, the Textiles Technologies Project, which supports the textiles and apparel industries, CIME, which supports business through creative intervention and SATnet, which provides a link between artists and businesses in the science and technology sectors. In addition, IPCRES is also based in CIRIC and is developing and disseminating research about durational and event based practices.

Alongside the numerous projects operating within CIRIC, there is also a Design Bureau, with water jet cutting, laser cutting and fabric printing services.

 The Centre for Lens Arts and Science Interaction is a research centre based within The Dynevor Centre for Art, Design, and Media at Swansea Metropolitan University. CLASI aims to encourage and promote interdisciplinary research projects, which stimulate research, innovation, and experimentation across photographic, digital and electronic arts. A strong emphasis is placed on research strands where the histories, philosophies and practices of art and science intersect. The definition of art and science is intentionally broad and the centre is aligned with SATnet and CIRIC.

Assessment

Our students have access to a diverse range of equipment and resources, which in most cases are sufficient to complete their programme of study. We provide the basic materials necessary for students to develop their practical work within our extensive workshop and studio facilities. However, it is likely that art and design students will incur some additional costs to extend their investigation of their personal practice. For example, purchasing their own specialised materials and equipment, joining in optional study trips, and printing.

Read less
The technology and applications of Non Destructive Testing (NDT) are wide-ranging and constantly evolving. Major fields of application include the aerospace industry, oil, gas and energy generation, chemical industries, space technology, rail transport, shipping and manufacturing. Read more
The technology and applications of Non Destructive Testing (NDT) are wide-ranging and constantly evolving. Major fields of application include the aerospace industry, oil, gas and energy generation, chemical industries, space technology, rail transport, shipping and manufacturing.

Other applications are constantly emerging and there are strong links with medical technology. New NDT techniques need to be developed to meet the changing needs of nano-technologies.

Course Overview

Careers in NDT often offer opportunities to travel and to work in new, high technology industries. The series of taught modules that form part one of the course will develop your in-depth knowledge and understanding of non-destructive testing technologies. The University has access to a range of state-of-the-art equipment and technologies including: Infrared Thermography; Ultrasonics; Scanning Laser Doppler Vibrometer; a ballistics testing cell and, DeltaVision computer software for the measurement of photoelasticity. Practical tasks undertaken with these facilities will enable you to develop your skills in applying a variety of testing and measurement techniques and critically examining the results.

Upon the successful completion of 120 credits in part one, you will be required to undertake an independent research project worth 60 credits. Your dissertation supervisor will be available to you to help guide you through the independent research phase.

Collaboration and Knowledge Transfer
Non Destructive Testing (NDT) and evaluation is a key area of research for UWTSD Swansea, where we are the lead academic partner in the NDT Validation Centre in Port Talbot (just outside Swansea), operated by TWI, a global leader in technology engineering and one of the UK's largest research organisations, with an international reputation. This partnership offers excellent opportunities to our students, providing industrial links relevant to the Part 2 project. Furthermore, funding from the Welsh Government and from the EPSRC has facilitated the acquisition of state-of-the-art equipment. Other links with industry include: Knauf Insulation; Silverwing UK Ltd; Oceaneering Inspection Services; Team Precision Pipeline Assembllies; Cyden; and, Rikoset.

UWTSD Swansea is the lead academic partner in the NDT Validation Centre, just outside Swansea, and through this partnership has strong links with TWI, one of the UK's largest research organisations, with an international reputation. The Institute has received significant funding for equipment and has an active research group in NDT,

Modules

The programme is structured in two parts. Part I (120 Credits) comprises the following taught modules:
-Research Methods
-NDT Systems, Standards and Applications
-Materials
-Ultrasonic Methods
-Radiographic Methods
-Electromagnetic Methods
-Thermal and Optical Methods

Part II (60 Credits)
-Major Project

Read less

  • 1
Show 10 15 30 per page



Cookie Policy    X