• Northumbria University Featured Masters Courses
  • University of Surrey Featured Masters Courses
  • Ulster University Featured Masters Courses
  • University of Derby Online Learning Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Birmingham City University Featured Masters Courses
De Montfort University Featured Masters Courses
University College London Featured Masters Courses
University of Hertfordshire Featured Masters Courses
University of Leeds Featured Masters Courses
University of Bath Featured Masters Courses
0 miles
Engineering×

Masters Degrees in Gas Engineering

We have 42 Masters Degrees in Gas Engineering

Masters degrees in Gas Engineering equip postgraduates with the skills to develop and maintain systems engineering techniques involved with the production, distribution and use of gasses.

Taught MSc courses are typical for the field, though research-based MRes and MPhil programmes may be available at some institutions. Entry requirements normally include an undergraduate degree in a relevant subject such as Civil Engineering or Environmental Studies.

Why study a Masters in Gas Engineering?

Read more...

  • Engineering×
  • Gas Engineering×
  • clear all
Showing 1 to 15 of 42
Order by 
Your programme of study. You can study this programme either full time on campus, part time, or online to fit flexibly around work commitments. Read more

Your programme of study

You can study this programme either full time on campus, part time, or online to fit flexibly around work commitments.

Whilst Safety and Reliability Engineering allows you to apply your skills and knowledge to a wider range of industries, this programme is specifically for the oil and gas industry. It provides you with the knowledge to review reliability of engineering facilities, materials and products and legislative framework at the same time. Safety has always been of paramount concern in the oil and gas industry with a lot of learning and knowledge acquired since the oil industry growth of the 1970s. This knowledge has been scrutinised by University of Aberdeen and the industry to provide professional expertise to manage safety and reliability. Future challenges are being met to some extent by the advent of affordable sensors which manage difficult to reach places, but nonetheless require the knowledge and capabilities of professionals working in this discipline to ensure they are fit for purpose.

The MSc Safety Engineering for Oil & Gas programme provides training in safety engineering, reliability engineering, and loss prevention in the offshore, nuclear, transport, aerospace and process industries and more. Fully accredited by the Institution of Mechanical Engineers (IMechE), the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Institute of Highway Engineers (IHE) and the Chartered Institution of Highways & Transportation (CIHT).

Courses listed for the programme

Semester 1

  • Fundamental Safety Engineering and Risk Management Concepts
  • Statistics and Probability for Safety, Reliability, and Quality
  • Fire and Explosion Engineering
  • Offshore Oil and Gas Production Systems

Semester 2

  • Advanced Methods for Risk and Reliability Assessment
  • Applied Risk Analysis and Management
  • Process Design, Layout and Materials
  • Human Factors Engineering

Semester 3

  • Project

Find out more detail by visiting the programme web page

There is also on online delivery

Why study at Aberdeen?

  • The university is highly regarded within the oil and gas industry for continuous integration with industry needs and knowledge
  • You can study flexibly either part time or online
  • It is supported by the Lloyds Register and Advisory Board which in turn builds on the knowledge within the School of Engineering
  • We are ideally placed to provide this programme of study and support it with strong links to industry

Where you study

  • University of Aberdeen
  • Full time and part time
  • 12 Months or 24 Months
  • September start

There is also an Online delivery of this programme

International Student Fees 2017/2018

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Fees for Online delivery

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

Your Accommodation

Campus Facilities

Find out more about living in Aberdeen and living costs

Other engineering disciplines you may be interested in:



Read less
Your programme of study. This programme is delivered online to allow you to study flexibly from remote locations and anywhere in the world with internet access. Read more

Your programme of study

This programme is delivered online to allow you to study flexibly from remote locations and anywhere in the world with internet access. You can study this to fit around your lifestyle and study at University of Aberdeen in Aberdeen city, a university providing wide ranging programmes specifically for the oil and gas industry since the 1970s. You study with world renowned academics who have closely studied, consulted with and researched the oil and gas industry. 

If you are interested in working in the oil and gas industry and you have a science or engineering background you might want to consider Oil and Gas Engineering at Master's degree level. This qualification takes you across the full life cycle of production and it contains quite a few employable elements and modules in themselves giving you a wide variety of skills and knowledge to take with you into employment. You will often work with other specialists on offshore drilling platforms and facilities recording information on drilling, researching the most productive areas, ensuring maintenance and health and safety and a constant flow from a well. You also oversee some of the decommissioning aspects to redundant equipment on site.

This is a highly skilled job with a lot of responsibility associated to it, and you receive excellent input from University of Aberdeen which has been teaching oil and gas related subjects since the inception of the oil and gas industry in Aberdeen since the 1970s. Aberdeen is known the world over for energy production out of Aberdeen city and academics have worked with industry to ensure that knowledge is relevant now and in the future. You study use of technology and management of energy innovation projects.

Courses listed for the programme

Year 1

  • Compulsory
  • Fundamentals of Petroleum Geoscience
  • Fundamentals of Safety Engineering and Risk Management Concepts
  • Well and Production Engineering
  • Flow Assurance

Year 2

  • Compulsory
  • Reservoir Engineering
  • Project Management
  • Oil and Gas Chemistry
  • Facilities Engineering

Year 3

  • Individual Project in Oil and Gas Engineering

Find out more detail by visiting the programme web page

Why study at Aberdeen?

  •  You can study online in your own free time and pay by module
  • You can take up to six years to complete the degree if 27 months is not long enough for your personal circumstances
  • You study at University of Aberdeen a world renowned university linked to the oil and gas industry and research
  • You are taught by internationally respected researchers known to the oil and gas industry

Where you study

  • Online Learning
  • 5 Months, 27 Months, or 30 Months
  • Part Time
  • September or January start

International Student Fees 2017/2018

Find out about fees

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page

Living in Aberdeen

Find out more about:

Campus Facilities

Other engineering disciplines you may be interested in:



Read less
Your programme of study. You can study Safety and Reliability Engineering for Oil and Gas flexibly from anywhere in the world as this delivery is online. Read more

Your programme of study

You can study Safety and Reliability Engineering for Oil and Gas flexibly from anywhere in the world as this delivery is online. You can fit this programme around your work and other commitments part time.

Whilst Safety and Reliability Engineering allows you to apply your skills and knowledge to a wider range of industries, this programme is specifically for the oil and gas industry. It provides you with the knowledge to review reliability of engineering facilities, materials and products and legislative framework at the same time. Safety has always been of paramount concern in the oil and gas industry with a lot of learning and knowledge acquired since the oil industry growth of the 1970s. This knowledge has been scrutinised by University of Aberdeen and the industry to provide professional expertise to manage safety and reliability. Future challenges are being met to some extent by the advent of affordable sensors which manage difficult to reach places, but nonetheless require the knowledge and capabilities of professionals working in this discipline to ensure they are fit for purpose.

The MSc Safety Engineering for Oil & Gas programme provides training in safety engineering, reliability engineering, and loss prevention in the offshore, nuclear, transport, aerospace and process industries and more. Fully accredited by the Institution of Mechanical Engineers (IMechE), the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Institute of Highway Engineers (IHE) and the Chartered Institution of Highways & Transportation (CIHT).

Courses listed for the programme

Year 1

  • Fundamental Safety Engineering and Risk Management Concepts
  • Statistics and Probability for Safety, Reliability and Quality
  • Advanced Methods for Risk and Reliability Assessment (Distance Learning)
  • Applied Risk Analysis and Management (Distance Learning)

Year 2

  • Fire and Explosion Engineering
  • Process Design, Layout and Materials (Distance Learning)
  • Human Factors Engineering
  • Offshore Oil and Gas Production Systems (Distance Learning)

Year 3

  • Individual Project

Find out more detail by visiting the programme web page

Why study at Aberdeen?

  • The university is highly regarded within the oil and gas industry for continuous integration with industry needs and knowledge
  • You can study flexibly either part time or online
  • It is supported by the Lloyds Register and Advisory Board which in turn builds on the knowledge within the School of Engineering
  • We are ideally placed to provide this programme of study and support it with strong links to industry

Where you study

  • Online
  • Part Time
  • 5 Months or 27 Months
  • September or January start

International Student Fees 2017/2018

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen and living costs 

Other engineering disciplines you may be interested in:



Read less
Your programme of study. If you are interested in working in the oil and gas industry and you have a science or engineering background you might want to consider Oil and Gas Engineering at Master's degree level. Read more

Your programme of study

If you are interested in working in the oil and gas industry and you have a science or engineering background you might want to consider Oil and Gas Engineering at Master's degree level. This qualification takes you across the full life cycle of production and it contains quite a few employable elements and modules in themselves giving you a wide variety of skills and knowledge to take with you into employment. You will often work with other specialists on offshore drilling platforms and facilities recording information on drilling, researching the most productive areas, ensuring maintenance and health and safety and a constant flow from a well. You also oversee some of the decommissioning aspects to redundant equipment on site.

This is a highly skilled job with a lot of responsibility associated to it, and you receive excellent input from University of Aberdeen which has been teaching oil and gas related subjects since the inception of the oil and gas industry in Aberdeen since the 1970s. Aberdeen is known the world over for energy production out of Aberdeen city and academics have worked with industry to ensure that knowledge is relevant now and in the future. You study use of technology and management of energy innovation projects.

Courses listed for the programme

Semester 1

  • Reservoir Engineering
  • Fundamental Safety Engineering and Risk Management Concepts
  • Fundamentals of Petroleum Geoscience

Semester 2

  • Oil and Gas Chemistry
  • Facilities Engineering
  • Project Management
  • Flow Assurance

Semester 3

  • Project

Find out more detail by visiting the programme web page

Why study at Aberdeen?

  • The programme allows you to explore a wide range of career options due to its breadth and depth
  • You learn technological skills, health and safety plus risk management, planning and communication
  • The programme is fully accredited by IMechE and Energy Institute both industry recognised
  • You are uniquely situated in Aberdeen city, Scotland, home of the European energy industry

Where you study

  • University of Aberdeen
  • Full Time
  • 12 Months
  • September or January start

International Student Fees 2017/2018

Find out about fees

  • International
  • EU and Scotland
  • Other UK

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

Your Accommodation

Campus Facilities

Find out more about living in Aberdeen and living costs

Other engineering disciplines you may be interested in:



Read less
Your programme of study. The programme is delivered on. campus. full time. and online. part time to give you flexible study options. Read more

Your programme of study

The programme is delivered on campus full time and online part time to give you flexible study options. If you want to join the growing companies operating in the subsea industry in Aberdeen or internationally or set up your own company this programme will provide you with a high level of technical training

The Master of Science in Subsea Engineering seeks to prepare highly-trained, highly-qualified, business-aware graduates that can make an immediate impact in their chosen career, and who can address the need for key skills in the subsea industry. Subsea Engineering at the University of Aberdeen has a unique relationship with the subsea industry both locally and internationally, and the programme receives contributions from local industrial organisations in terms of relevant and up-to-the minute contributions to teaching, and support in the specification of group and individual projects.

Aberdeen is the heart of the European oil and gas industry, an international hub for companies engaged in Subsea Engineering. A degree from the University of Aberdeen puts you in a unique position to develop business links alongside of learning and developing international skills within the flexible, modular programme.

Courses listed for the Campus programme

Semester 1

  • Offshore Structures and Subsea Systems
  • Subsea Control
  • Subsea Integrity
  • Subsea Construction, Inspection and Maintenance

Semester 2

  • Pipelines and Soil Mechanics
  • Risers Systems and Hydrodynamics
  • Flow Assurance
  • Engineering Risk and Reliability Analysis

Semester 3

  • Subsea Engineering Individual Project

Courses for the Online Programme

Year 1

  • Offshore Structures and Subsea Systems
  • Subsea Construction, Inspection and Maintenance
  • Pipelines and Soil Mechanics
  • Engineering Risk and Reliability Analytics

Year 2

  • Subsea Control
  • Subsea Integrity
  • Risers Systems and Hydrodynamics
  • Flow Assurance

Year 3

  • Subsea Engineering Individual project

Find out more detail by visiting the programme web page

Online delivery

Why study at Aberdeen?

  • Aberdeen is a recognised hub and centre of excellence in Subsea, as Europe's energy capital and 'World Energy City'
  • The programme is accredited by the Institute of Marine Engineering, Science and Technology (MarEST) and Institution of Mechnical Engineers (IMechE). the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), The
  • Institute of Highway Engineers (IHE) and Chartered Institution of Highways and Transportation (CIHT)
  • We are able to draw upon knowledge and industry experience within the subsea sector on our doorstep to challenge you
  • The programme is very employable with graduates moving to CEO level

Where you study

  • University of Aberdeen
  • Full Time
  • September start

There is also an online delivery of this programme

  • Online
  • 5 Months 27, 30 Months
  • Part Time
  • September and January start

International Student Fees 2017/2018

Find out about fees for campus delivery:

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Find out about online fees

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen for Campus Study

Find out more about:

Your Accommodation

Campus Facilities

Find out more about living in Aberdeen and living costs

Online delivery

Other engineering disciplines you may be interested in:



Read less
Your programme of study. This is a flexible online programme which offers you a variety of study options to gain your MSc in Petroleum Engineering from as little as 36 months to a maximum of 72 months to complete with 10-12 hours of study per week on average. Read more

Your programme of study

This is a flexible online programme which offers you a variety of study options to gain your MSc in Petroleum Engineering from as little as 36 months to a maximum of 72 months to complete with 10-12 hours of study per week on average. You can study this programme from anywhere in the world and it offers the same academic rigour you would expect if you were studying on campus at University of Aberdeen but you can fit it around a busy life, work, other responsibilities and much more.

If have an engineering, science or mathematics degree and you are considering work in the oil and gas industry worldwide Petroleum Engineering can provide you with a wide range of knowledge and skills within the upstream oil and gas extraction area. The programme mainly focuses on the skills you need to extract oil which can be the initial geoscience knowledge through to core analysis and reservoir engineering. Within reservoir and well engineering there are several areas of analysis, testing and development you then specialise in. This ensures you have a very robust approach to offshore production with the type of advanced skills to problem solve and troubleshoot different situations.

The programme also develops your skills in formation evaluation, simulation, and appraisal plus safe production and enhancing the recovery of hydrocarbon oil and gas. This programme is highly regarded in the industry internationally and it is recognised by all major players in the oil and gas industry. Careers can be anything from Drilling, Operations, Piping Specification, Production, Reservoir, Subsurface and Wellhead Engineer. The degree hold accreditation from the Energy Institute and Institute of Mechanical Engineers

Courses listed for the programme

Find out more detail by visiting the programme web page

Why study at Aberdeen?

  • The programme is fully flexible to allow you to study wherever you are online
  • You will acquire skills and knowledge from a programme closely linked to industry needs
  • You study with a university situated in the heart of the European and world Energy Industry, many companies are located here
  • You study with two highly regarded departments in Geology and Engineering and at University of Aberdeen which is very well known in the oil and gas industry globally
  • You can pay by module and take the degree over a longer period up to six years

Where you study

  • Online Learning
  • 5 Months, 27 Months, or 30 Months
  • Part Time
  • September or January start

International Student Fees 2017/2018

Find out about international fees:

  • International
  • EU and Scotland
  • Other UK

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

You may be also interested in the campus delivery of this programme

Related Postgraduate Degrees

Other engineering disciplines you may be interested in:



Read less
Your programme of study. This is a highly specialised area of oil and gas engineering in which you learn the discipline and wider areas that feed into it. Read more

Your programme of study

This is a highly specialised area of oil and gas engineering in which you learn the discipline and wider areas that feed into it. You are taught by industry respected researchers and academics who have followed the oil and gas industry since the 1970s and its inception in Aberdeen city. Aberdeen is at the heart of the oil and gas industry in Europe and is known worldwide as a major energy hub.

Reservoir Engineering is a highly specialised but essential part of upstream oil and gas extraction process. It requires detailed knowledge of geology, performance and management of reserves. Often these reserves are deep in oceans or land and in very difficult and hard to reach locations with complex geology  so it is essential to have a high degree of skills and knowledge to understand how best these reserves can be tapped into in critically sensitive environments.

There is a recognised, global shortage of practitioners in the area of reservoir engineering which is addressed by the programme. You study a wide spectrum of reservoir phenomena, and to evaluate them in the context of petroleum engineering and cognate areas of petroleum Geoscience, within the economic context of the hydrocarbon industry. You have employment options worldwide in the oil and gas industry with plenty of options to travel to growth markets and untapped areas of reserves within multinationals and consultancies. 

Courses listed for the programme

Semester 1

  • Fundamentals of Petroleum Geo-science
  • PetroPhysics, Core Analysis, and Formation Evaluation
  • Reservoir Engineering
  • Introduction to Energy Economics

Semester 2

  • Reservoir Sedimentology and Structure
  • Group Project and Research Skills

Semester 3

  • Project

Find out more detail by visiting the programme web page

Why study at Aberdeen?

  • You study with world renowned researchers at University of Aberdeen which has had a close connection with the energy industry based in the city since the 1970s
  • You take part in a field trip to experience application of theory and practical understanding of elements to the programme
  • You learn a wide range of skills applicable to this programme but also employable in their own right such as Energy Economics, Petrophysics, Core Analysis and Formation Evaluation. This adds value to your specialism in reservoir engineering.

Where you study

  • University of Aberdeen
  • 12 Months Full Time
  • September start

International Student Fees 2017/2018

Find out about international fees:

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

Your Accommodation

Campus Facilities

Find out more about living in Aberdeen and living costs

Other engineering disciplines you may be interested in:



Read less
IN THIS INTENSIVE, PART-TIME, 18-MONTH ONLINE PROGRAM YOU WILL GAIN. - Skills and know-how in the latest technologies in E & I oil and gas engineering. Read more

IN THIS INTENSIVE, PART-TIME, 18-MONTH ONLINE PROGRAM YOU WILL GAIN:

- Skills and know-how in the latest technologies in E & I oil and gas engineering

- Tremendous boost to your E & I oil and gas career – no matter whether you are a new graduate or a technician

- Decades of real experience distilled into the course presentations and materials

- Guidance from real E & I oil and gas experts in the field

- Hands-on practical knowledge from the extensive experience of instructors, rather than the theoretical information from books and colleges

- Credibility as the local expert in E & I oil and gas

- Networking contacts in the oil and gas industry

- Improved career prospects and income

- An Advanced Diploma in Electrical & Instrumentation Engineering for Oil and Gas

Next intake is scheduled for September 3, 2018. Applications are now open; places are limited.

INTRODUCTION

There is a growing shortage, and hence opportunity, for Electrical and Instrumentation (E & I) technicians, technologists and engineers in the oil and gas industry. This is due to an increasing need for higher technology methods of obtaining and processing oil and gas as it is a finite declining resource. The technical challenges of extracting oil and gas are becoming ever more demanding, with increasing emphasis on more marginal fields and previously inaccessible zones such as deep oceans, Polar regions, Falkland Islands and Greenland. The aim of this 18-month e-learning program is to provide you with core E & I engineering skills so that these opportunities may be accessed, to enhance your career, and to benefit your firm.

This advanced diploma is presented by lecturers who are highly experienced engineers from industry, having 'worked in the trenches' in the various E & I engineering areas. When doing any course today, a mix of both extensive experience and teaching prowess is essential. All our lecturers have been carefully selected and are seasoned professionals.

This advanced diploma course provides a practical treatment of electrical power systems and instrumentation within the oil, gas, petrochemical and offshore industries. Whilst there is some theory this is used in a practical context giving you the necessary tools to ensure that the Electrical and Instrumentation hardware is delivering the results intended. No matter whether you are a new electrical, instrumentation or control technician/technologist/graduate engineer or indeed, even a practicing facilities engineer, you will find this course beneficial in improving your understanding, skills and knowledge of the whole spectrum of activities ranging from basic E & I engineering to advanced practice including hazardous areas, data communications along with a vast array of E & I equipment utilized in an oil and gas environment.

WHO SHOULD COMPLETE THIS PROGRAM?

This program would be ideal for you if you are seeking to get know-how and expertise in the oil and gas business and are an:

- Instrument and process control technician or technologist

- Instrument fitter

- Chemical or mechanical engineer

- Electrical engineer currently working in a different area to oil and gas

- Experienced electrician

- A recent graduate electrical, instrumentation or mechanical engineer

Even if you are highly experienced you will find this a great way to become familiar with the oil and gas technology as quickly as possible.

COURSE CONTENT

The valuable oil and gas program has five main streams:

- Electrical engineering

- Instrumentation and Control engineering

- General Oil and Gas engineering

- Subsea Instrumentation and Control

- Floating Production, Storage and Offloading (FPSO) Facilities

COURSE FEES

EIT provides distance education to students located almost anywhere in the world – it is one of the very few truly global training institutes. Course fees are paid in a currency that is determined by the student’s location. A full list of fees in a currency appropriate for every country would be complex to navigate and, with today’s exchange rate fluctuations, difficult to maintain. Instead we aim to give you a rapid response regarding fees that is customized to your individual circumstances.

We understand that cost is a major consideration before a student commences study. For a rapid reply to your query regarding courses fees and payment options, please query via the below button and we will respond within 2 business days.



Read less
WHAT YOU WILL GAIN. ·        Skills and know-how in the latest and developing technologies in electrical and instrumentation in oil and gas. Read more

WHAT YOU WILL GAIN:

·        Skills and know-how in the latest and developing technologies in electrical and instrumentation in oil and gas

·        Practical guidance and feedback from electrical and instrumentation experts from around the world

·        Live knowledge from the extensive experience of expert instructors, rather than from just theoretical information gained from books and college

·        Credibility and respect as the local electrical and instrumentation in oil and gas expert in your firm

·        Global networking contacts in the industry

·        Improved career choices and income

·        A valuable and accredited Master of Engineering (Electrical and Instrumentation in Oil and Gas)** qualification

Next intake is scheduled for 2019.

INTRODUCTION

The Master of Engineering (Electrical and Instrumentation in Oil and Gas) is a comprehensive qualification for Design, Installation, Commissioning and Maintenance Engineers who are looking for a career in the onshore and offshore oil and gas industry. The course addresses the specific core competencies and associated underpinning knowledge required for the position of Principal Engineer.

There are twelve units in the degree which cover electrical & instrumentation (E&I) engineering, its design and the management of E&I personnel. Other topics include process control, process safety lifecycle management and the safetyintegrity of facilities. Power engineering, maintenance management and specialist areas such as emergency shutdown systems, fire and gas are also covered. The course is rounded off with a unit on project management.

The Masters project thesis, as the capstone of the course, requires a high level of personal autonomy and purpose; it reinforces the knowledge gained during the degree. As a significant research component of the course, this project requires students to examine and explore their subjects, make critical evaluations and apply their knowledge and skill. It aims to prepare and enable students to critique and potentially enhance current professional practice in the Oil and Gas industry.

ENTRANCE REQUIREMENTS

Entry Requirements: Master of Engineering (Electrical and Instrumentation in Oil and Gas)

 To gain entry into this program, applicants need one of the following:

a) a recognized 3-year bachelor degree* in an engineering qualification in a congruent** field of practice.

b) an EIT Bachelor of Science (Engineering) degree* in a congruent** field of practice.

c) a 4-year Bachelor of Engineering qualification (or equivalent), that is recognized under the Washington Accord or Engineers Australia, in a congruent**, or a different field of practice at the discretion of the Admissions Committee.

d) a 4-year Bachelor of Engineering qualification (or equivalent)* that is not recognized under the Washington Accord, in a congruent** field of practice to this program.

AND

An appropriate level of English Language Proficiency equivalent to an English pass level in an Australian Senior Certificate of Education, or an IELTS score of 6.0 (with no individual band less than 6.0), or equivalent as outlined in the EIT Admissions Policy.HE

* With integrated compulsory 12-week professional industry experience, training or project work of which 6 weeks are directly supervised by a professional/eligible professional engineer as determined by EIT.

** Congruent field of practice means one of the following with adequate Electrical and Instrumentation in Oil and Gas content (fields not listed below to be considered by the Dean and the Admissions Committee on a case-by-case basis):

• Electronic and Communication Systems

• Instrumentation, Control and Automation

• Industrial Automation

• Industrial Engineering

• Electrical Engineering

• Chemical Engineering

• Process Engineering

• Mechatronic Systems

• Production Engineering

• Robotics

PROGRAM STRUCTURE

Students must complete 48 credit points comprised of 12 core subjects and one capstone thesis. The thesis is the equivalent of one full semester of work. There are no electives in this course. The course duration is two years full time, or equivalent. Subjects will be delivered over 4 semesters per year. Students will take 2 subjects per semester and be able to complete 8 subjects per year. There will be a short break between semesters. Each semester is 12 weeks long.

LIVE WEBINARS

During the program you will participate in weekly interactive sessions with the lecturers and other participants from around the world. Each unit's weekly live tutorial will last 60 to 90 minutes. We take student availability into consideration wherever possible before scheduling webinar times. All you need to participate is an adequate Internet connection, speakers and a microphone. The software package and setup details will be sent to you at the start of the program.

COURSE FEES

EIT provides distance education to students located almost anywhere in the world – it is one of the very few truly global training institutes. Course fees are paid in a currency that is determined by the student’s location. A full list of fees in a currency appropriate for every country would be complex to navigate and, with today’s exchange rate fluctuations, difficult to maintain. Instead we aim to give you a rapid response regarding fees that is customized to your individual circumstances.

We understand that cost is a major consideration before a student commences study. For a rapid reply to your query regarding courses fees and payment options, please query via the below button and we will respond within 2 business days.



Read less
This course aims to equip you with sector specific oil and gas engineering, technology and operational skills to succeed in this competitive environment. Read more
This course aims to equip you with sector specific oil and gas engineering, technology and operational skills to succeed in this competitive environment.

WHY CHOOSE THIS COURSE?

The oil and gas industry is continuously developing and is therefore both recognised and expected to remain as a major contributor to the economy of many developed and developing regions as it continues to be driven not only by new oil and gas discoveries, but by a constant demand to find newer, safer, more efficient and cost-effective ways of extracting resources. Whilst exploration continues to identify major oil and gas finds across the world, these are increasingly less accessible and require complex engineering solutions to deliver effective operations and supply. Additionally, the significant and rising operating costs of existing installations are driving the sector to seek suitably qualified engineers are able to support operations and initiate improvements within the four main strands of oil and gas facilities: offshore, onshore, sub-sea and pipelines.

This course will provide you with specialist education in oil and gas engineering and help to equip you with the theoretical and practical knowledge and skills required by the industry to solve and manage oil and gas engineering problems and complexities and to optimise existing processes to deliver increased efficiencies.

The global nature of the industry offers significant scope for graduates to have an incredibly varied career spanning international borders. This course is designed to allow you to develop the knowledge and skills for a wide range of professional opportunities in national and multinational oil and gas companies and consultancies.

WHAT WILL I LEARN?

A wide range of subjects are available, giving you a multidisciplinary approach to oil and gas engineering.

Modules
-Durability, Reliability and Sustainability
-Engineering Materials for the Oil and Gas Sector
-Fluid Flow Systems including Distribution and Transmission
-Control Systems and Instrumentation for the Oil and Gas Industry
-Petroleum Processing and Gas Technologies
-Drilling and Production Technology
-Health, Safety and Environmental Management in the Oil and Gas Industry
-Project Management
-Study Skills and Research Methods
-Research or Industry Sponsored Project

HOW WILL THIS COURSE ENHANCE MY CAREER PROSPECTS?

This course has been developed with industry experts and aims to provide you with technical capability alongside analytical and creative skills to have a successful career in the oil and gas industries. Throughout the course you will find yourself working on current industry-based problems, providing you with the opportunity to gain additional skills and experience. The course will keep you up to date with current events and the latest, leading-edge industry thinking through opportunities to visit facilities and hear from leading industry figures. These visits are a great way to network with potential employers.

GLOBAL LEADERS PROGRAMME

To prepare students for the challenges of the global employment market and to strengthen and develop their broader personal and professional skills Coventry University has developed a unique Global Leaders Programme.

The objectives of the programme, in which postgraduate and eligible undergraduate students can participate, is to provide practical career workshops and enable participants to experience different business cultures.

Read less
There is still a shortage of qualified engineering specialists in the oil and gas sector, with skilled professionals enjoying competitive salaries. Read more

About the course

There is still a shortage of qualified engineering specialists in the oil and gas sector, with skilled professionals enjoying competitive salaries.

This programme trains specialist engineers in oilfield structural design, fabrication and installation. It is aimed both at engineering and physical science graduates who are interested in working in the oil and gas industry and practising professionals who wish to specialise in the design, analysis and construction of oil and gas installations.

Aims

With high demand for qualified oil and gas engineers, graduates enter a global job market and can expect exciting career prospects - a trend that looks likely to continue for years to come.

As the industry now seeks the rapid drilling and commissioning of new wells to meet energy demands, along with major investment in heavy oils and shale oil and gas, skilled engineers who can rapidly design and commission oilfield installations will be the backbone for growth in this industry. It is precisely this type of engineer that Brunel’s programme will develop.

A distinguishing feature of the course is its ambition to instil systems thinking, by treating structures and their operating environment holistically as a system – helping graduates develop the skills to address a wide range of complex engineering problems rapidly.

Course Content

The programme duration will be 12 months for full-time study, or 24 months for part-time.

The taught part of the programme will take place during the Autumn and Spring terms over 24 weeks. Students will be encouraged to start planning their dissertation at the beginning of the programme. During the Summer term, students will be expected to focus their effort on their dissertation project, researching the dissertation topic full-time. Part-time students will be allowed an extended period to execute their dissertation project in line with the overall programme duration. However, they will be expected to devote an equivalent of at least one day per week on their dissertation project.

This programme has been developed with extensive consultation with the industry. It will be delivered by Brunel staff members and by industrial specialists. The programme structure is shown below and comprises two parts:

Core modules: The taught part of the course (Part 1) worth 120 credits. This includes a set of compulsory modules that provides fundamentals of structural and process engineering, and focuses on providing an understanding of how to design oil and gas structures such as pipelines, offshore and onshore to withstand internal loading induced by complex internal flows of oil and gas and also external loads such as waves and wind. Throughout fundamental mathematical, computational, experimental, testing and inspection techniques as well as codes of practice are taken into account. Civil engineering and construction aspects are also taught.

Dissertation: Your dissertation project forms Part 2 of the programme and is worth 60 credits.

Full-time (12 months) MSc and PGDip modules include:

Petroleum Production Fundamentals
Applied Engineering Mathematics
Structural Materials
Structural Integrity and FEA
Multiphase Flow Fundamentals and Flow Assurance
Dynamics of Petroleum Structures
Design and Construction of Installations
Reliability Engineering and Risk Management

Term Three (MSc Only):

Dissertation
Students will conduct a major piece of research (c. 30,000 words) in an area of oil and gas engineering.

Delivery will take place in block mode teaching with each module requiring a week-long teaching schedule. Laboratory sessions will take place at specialist facilities in the week following the module delivery and will last for up to three days each.

Part-time (24 months) MSc and PGDip:

In the part-time mode, four taught modules are taken each year with the completion of the dissertation following in term three of the second year.

Full-time and part-time (12 and 24 months) PGCert:

Students must take the Design and Construction Installations and Petroleum Production Fundamentals modules and select any other two modules.

Work Placements

Brunel has a purpose built award-winning Professional Development Centre with over 30 staff, including specialist industry consultants. The Placement service includes CV writing, one-to-one guidance and mock interviews. Brunel was named ‘Best University Placement Service’ at the Rate My Placement Awards in 2012.

Teaching

Students are introduced to subject material, including key concepts, information and approaches, through a mixture of standard lectures and seminars, laboratory practicals, self-study and individual research reports. Supporting material is available online. The aim is to challenge students and inspire them to expand their own knowledge and understanding.

Preparation for work is achieved through the development of 'soft' skills such as communication, planning, management and team work.
In addition, guest speakers from industries will provide a valuable insight into the real world of the oil and gas sector.

Many elements of coursework involve, and reward, the use of initiative and imagination. Some of the projects may be linked with research in the College's research institutes.

Assessment

Each module is assessed either by formal examination, written assignments and laboratories or a combination of these. Cut-off dates for receipt of assignments are specified at the beginning of the academic year. Examinations are normally taken in December and May.

Special Features

Students will be able to access laboratory facilities at the recently formed NSIRC site which are extensive, modern and well equipped.

Although we recruit a large number of highly qualified students to our undergraduate, postgraduate and research degrees each year, we don’t forget that you are an individual. From the beginning of your time here, you are allocated a personal tutor who will guide you through academic and pastoral issues.

The College is research intensive as our academics are actively involved in cutting-edge research. Much of this research is undertaken with collaborators outside the University, including leading oil and gas companies, construction companies, water utilities, and other leading industrial firms. We work with universities in China, Poland, Egypt, Turkey, Italy, Denmark and Japan. This research is fed directly into our courses, providing a challenging investigative culture and ensuring that you are exposed to up-to-date and relevant material throughout your time at Brunel.

We have excellent links with business and industry in the UK and overseas. This means:
Brunel degrees are designed to meet the needs of industry and the market-place;
The latest developments in the commercial world feed into your course;
You have greater opportunity at the dissertation stage of conducting a dissertation in industry;
We have more contacts to help you find a job when you graduate.

Accreditation

This course has been designed and developed in close consultation with industry and the Oil and Gas Engineering MSc is accredited by the Institute of Materials, Minerals and Mining (IOM3). We are seeking accreditation with the following professional bodies:

Institution of Mechanical Engineers
Society of Petroleum Engineers
Institution of Chemical Engineers

Read less
Your programme of study. Subsea Engineering is one of the most challenging areas within the energy industry due to the locations involved in minerals extraction. Read more

Your programme of study

Subsea Engineering is one of the most challenging areas within the energy industry due to the locations involved in minerals extraction. It is a vital part of the oil and gas industry and though it is technically challenging there is a lot of new technology coming online to improve supply and monitoring in the ocean.

You are taught by industry informed academics from two main energy hubs internationally in Global Subsea Engineering. At Aberdeen you have the combined expertise of academics who have closely followed the oil and gas since growth in the 1970s at Aberdeen from which they have been informed by industry in the city. In Perth Australia you are taught by another major university at Curtin who also work closely with their energy hub both in the Pacific and Asian regions. This partnership gives you the best teaching and future opportunities possible within the Subsea sector in your respective region. You are awarded with a degree from both institutions giving you strength in the global employment market and the level of knowledge you will carry with you.

You learn in depth skills, application and theory within subsea environments to ensure sufficient knowledge about control, risk management and maintenance, flow assurance, reliability and integrity. You can begin the programme with Curtin by taking Semester 1 and the Project module in Perth and Semester 2 in Aberdeen as an alternative. Graduates from the programme have gone on to successful careers as CEO and MD within existing business and new business and as specialists in Subsea Engineering,. 

Find out more detail by visiting the programme web page

Courses listed for the programme

Semester 1 (University of Aberdeen)

  • Subsea Construction, Inspection and Maintenance
  • Subsea Control
  • Subsea Integrity
  • Offshore Structures and Subsea Systems

Semester 2 (Curtin University)

  • Phase Behaviour and Flow Assurance
  • Umbilical's and Risers
  • Safety, Reliability and Integrity Management
  • Flow and Pipelines

Research Project (University of Aberdeen)

Why Study at Aberdeen?

  • You spend a semester studying at Curtin University in Perth, Western Australia and graduate with a degree from both universities
  • Aberdeen is recognised as a global Centre of Excellence for Subsea. It is a founding member of the Global Subsea Universities Alliance
  • Aberdeen is a major global hub of the energy industry and Aberdeen is recognised as a global centre of excellence in Subsea development and operations

Where you study

  • University of Aberdeen
  • 12 Months
  • Full Time
  • September start

International Student Fees 2017/2018

Find out about fees:

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

Your Accommodation

Campus Facilities

Find out more about living in Aberdeen and living costs

Other engineering disciplines you may be interested in:

 



Read less
IN BRIEF. The first course of its kind in the UK. Enhances your career prospects in the oil and gas industries. Gives you the opportunity to become a Chartered Engineer. Read more

IN BRIEF:

  • The first course of its kind in the UK
  • Enhances your career prospects in the oil and gas industries
  • Gives you the opportunity to become a Chartered Engineer
  • Part-time study option
  • International students can apply

COURSE SUMMARY

This course is designed for engineering graduates who intend to enter or enhance their career prospects in the oil or natural gas industry. It will be re-accredited by the IGEM in 2016.

The course explores the geology, exploration, drilling, production (surface and subsurface), reservoir engineering and management, distribution and transmission of oil and gas from practical and theoretical viewpoints.

You will develop the knowledge and the skills for problem solving in terms of development, design, business and economics management in oil and gas engineering which will assist you to make management and scientific decisions in the workplace.

On completion of this course you may be eligible to join the Institution of Gas Engineers & Managers or Society of Petroleum Engineers which may enable you to qualify as a Chartered Engineer.

COURSE DETAILS

As well as studying the topics outlined in the following modules you will be expected to develop, to a professional standard, a number of transferable skills such as numeracy skills by way of quantitative mathematical analysis, problem solving skills, communication skills during group work, laboratory report writing and time management skills.

DURATION:

September intake

MSc (one year full-time or two years part-time)

PgDip (nine months full-time or one year and six months part-time)

January intake

MSc (one year and four months full-time or two years and eight months part-time)

PgDip (one year full-time or two years part-time)

TEACHING

Teaching will be carried out as formal lectures, laboratories, tutorials and workshops

ASSESSMENT

Petroleum and Gas Engineering students are required to attend all of the modules. There are seven examination sessions. Students must pass all the modules studied with an overall average of at least 50% in the module programmes and in the course assessed work.

All laboratory and course assessed work must be submitted on time and to the required standard.

Students admitted to the course at Diploma level with examination and coursework of 50 % may proceed to MSc level. (120 Credits)

MSc Students must undertake a dissertation (60 Credits) on any aspect of the natural gas business either experimentally or computationally. The project can frequently relate to research work already in the school and or natural gas engineering and management.

CAREER PROSPECTS

Due to the relative uniqueness of this course in the UK, together with the high demand of graduates with the types of skills and knowledge that this course offers, employment prospects are excellent.

Graduates can expect to enter or progress in industries such as petroleum, gas, process engineering, chemical or steel.

LINKS WITH INDUSTRY

This programme is strongly supported by major petroleum and gas engineering technology providers.

You will be assessed by both coursework 50% and examinations 50%



Read less
An oil and gas engineer is involved in nearly all stages of oil and gas field evaluation, development and production. The aim is to maximise hydrocarbon recovery at minimum cost while maintaining a strong emphasis on reducing environmental impact. Read more
An oil and gas engineer is involved in nearly all stages of oil and gas field evaluation, development and production. The aim is to maximise hydrocarbon recovery at minimum cost while maintaining a strong emphasis on reducing environmental impact. The range of employment opportunities for students who hold an MSc oil & gas Engineering is very wide. Once you have completed your MSC in Oil & Gas Engineering, you will be equipped with skills and knowledge that enable you to solve future tasks and challenges related to the development and production of oil and gas fields. There are great work opportunities within the traditional as well as the future oil industry. Possible work places include National and international oil companies, consultancy firms and service providers. A completed study also forms a good basis for a future career as a researcher.

You will receive guidance and support from staff that have specialised in the discipline of oil & gas, fire science and energy for many years. All the staff involved in this course are committed to meeting your expectations. However, in turn there are certain expectations of you, as studying at this level requires you to demonstrate that you have the mental capacity, self-motivation and commitment to achieve this award.

Teaching methods include lectures, seminars, workshops, laboratory work, project work, case studies, site visits. The mix of teaching methods is designed to motivate, challenge students considering different learning styles to maximise their potential. Personal study also forms an integral part of the course. The students will learn by a variety of methods including innovative information and communication technologies and practical case studies based on research outcomes achieved by the School staff.

INDUSTRY LINKS

The course is supported by an Industrial Liaison Group which reviews and provide input into the development of the course in order to ensure that it meets the needs of the oil and gas industry. Our Industrial partners also contribute to some teaching through guest lecturers, CPD events, and research projects. Invited lectures were done by representatives from Energy Institute, Institution of Fire Engineers, Shell, BP, GexCon, Fire and Rescue Services, Tyco, BRE, Horea Lea, Carbon Trust, Government Office for the North West and others.

LEARNING ENVIRONMENT AND ASSESSMENT

The course will be delivered through lectures, tutorials and practical exercises. Guided teaching and formal assessments will enhance the development of transferable skills such report-writing, maintenance of case notes, formal presentations, participation in discussions, ability to work to deadlines, computing skills, public speaking, scientific analysis, adherence and development of laboratory protocols and research methods.

There are different assessment methods employed across the modules. Some modules are assessed by both examination and coursework while others are assessed by coursework only, which may take the form of group projects, modelling exercises or time-controlled assignments or seminar presentations.

OPPORTUNITIES

The range of employment opportunities for students who hold MSc Oil & Gas Engineering is very wide.

By completing Masters in Oil & Gas Engineering, you will learn skills and knowledge that enable you to solve upcoming responsibilities and challenges related to the petroleum industry. There are great work opportunities within the oil and gas industry. Possible work places include national and international oil companies, consultancy companies and oil and gas service firms.

Many of our students have progressed into either further higher study at the PhD level, or full-time employment within national and international organisations, consultancy or servicing companies.

Read less
Your programme of study. Ageing infrastructure from the golden days of the oil and gas and energy industry is now being identified for decommissioning. Read more

Your programme of study

Ageing infrastructure from the golden days of the oil and gas and energy industry is now being identified for decommissioning. Some of it is in the North Sea but many other countries are increasingly realising that they need to decommission properly and effectively due to environmental regulation. Building a platform has provided a rapid and continuous learning process since the start of the energy industry but learning how to decommission a platform has now started a rapid learning experience about best practise methods across the supply chain and facilities available to deal with entire platforms and their various facilities are now an important concern.

The degree will cover all aspects of decommissioning process including engineering, legal, environmental regulation, business and project management risks and challenges across the oil and gas industry, You study the important aspects of offshore subsea systems, well plugging, offshore installations, project evaluating and economics, environment impact assessment process an regulation, and a group project in comparative assessment. You also look at process shutdown and disposal.  This is a highly complex area due to the level of environmental contaminants and different types of facilities to take down.

There are many oil and gas companies now decommissioning with the Brent Delta platform being a highly publicised example. You may be interested in reading about decommissioning from the Department of Business Energy and Industrial Strategy which gives you more information about the process, the companies involved and some examples of environmental statements and other useful information

There is also a Decommissioning MSc delivered online by University of Aberdeen listed below:

Courses listed in the programme

SEMSTER 1

  • Offshore Structures and Subsea Systems
  • Well Plugging and Abandonment
  • Law and Decommissioning Regulatory Aspects
  • Petroleum Economics and Project Evaluation

SEMESTER 2

  • Group Projects in Comparative Assessment
  • Marine Environmental Impact Assessment
  • Process Shut Down, Structural Decommissioning and Disposal

Optional x 2

1 course from the option below:

  • Decommissioning of Offshore Installations: Commercial Aspects
  • Engineering Risk and Reliability Analysis*
  • Applied Marine Ecology and Ecosystem Management

*Suitable only for students with Engineering, Maths or Physics

SEMESTER 3

  • Project

Find out more from the Decommissioning web page

Why study at Aberdeen?

  • This programme is one of the first programmes in decommissioning oil rigs, platforms and structures
  • Aberdeen is the European energy hub where many academics have worked in the industry
  • Many of the decommissioning activities take place and are planned in Aberdeen
  • You gain from wide ranging oil and gas knowledge at the university spanning the entire life cycle

Where you study

  • University of Aberdeen
  • 12 Months Full Time
  • September start
  • There is also an online delivery listed at the bottom

International Student Fees for 2017/ 2018

Find out about international fees:

  • International
  • EU and Scotland
  • Other UK

Find out more about fees on the programme page

*Please be advised that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page and the latest postgraduate opportunities

Living in Aberdeen

Find out more about:

Your Accommodation

Campus Facilities    

Find out more about living in Aberdeen and living costs

You may also be interested in the online Decommissioning MSc

Other engineering disciplines you may be interested in:



Read less

Show 10 15 30 per page



Cookie Policy    X