• University of Leeds Featured Masters Courses
  • University of York Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of Glasgow Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Regent’s University London Featured Masters Courses
De Montfort University Featured Masters Courses
University of Leeds Featured Masters Courses
Southampton Solent University Featured Masters Courses
Coventry University Featured Masters Courses
University of London International Programmes Featured Masters Courses
"vibration" AND "analysis…×
0 miles

Masters Degrees (Vibration Analysis)

  • "vibration" AND "analysis" ×
  • clear all
Showing 1 to 15 of 22
Order by 
This is an advanced postgraduate course specialising in structural engineering covering advanced structural analysis and design, structural computing simulation and also offering units linked with steel, concrete, timber and other structural designs. Read more
This is an advanced postgraduate course specialising in structural engineering covering advanced structural analysis and design, structural computing simulation and also offering units linked with steel, concrete, timber and other structural designs. It will also provide you with knowledge to design structures under dynamic and earthquake conditions.

The modules taught focus on learning advanced methods and techniques while developing analytic skills across a range of structural engineering topics.

Two modules, Finite Elements and Stress Analysis and Advanced Computing Structural Simulation, focus on learning advanced computing methods and commercial computing software for structures modelling and simulation.

Advanced Structural Analysis and Design and the Masonry and Timber Engineering modules will cover advanced structural theory and designing traditional structures, such as, steel, concrete, masonry and timbers. Earthquake Engineering will cover design of structures in seismic areas and analysis of structures under dynamic loading.

Soil-Structure Engineering will cover interaction of geotechnics and structures as well as foundation structures. Finally, you'll either conduct a structural related research project or a design project.

If you'd like any further information, please contact the course administrator, Ms. Jo Hillman: or call 020 7815 7106.

Accreditation:
Joint Board of Moderators (ICE, IStructE, IHE, CIHT)

See the website http://www.lsbu.ac.uk/courses/course-finder/structural-engineering-msc

Modules

Teaching techniques include: lectures, workshops, tutorials, laboratories, field trips and IT based blended learning. Visiting lecturers from industry contribute in some modules.

Module descriptions

- Advanced structural design
The module will deal with the design of structural elements and complex structural systems using the increasingly popular structural Eurocodes. It will cover engineering design principles and analytic techniques as well as the application of industrial standard software packages. There will also be an element of group and research work based on innovative design techniques.

- Soil-structure engineering
To acquaint the student with classical and modern methods for the analysis and design of structures that are embedded in the ground, specifically embedded retaining walls, piled foundations, and tunnels.

- Finite elements and stress analysis
The module will equip the student with linear elastic analysis of thin-walled sections, 2D and 3D stress analysis and transformations. It will introduce the Finite Element method theory and use ANSYS software.

- Masonry and timber engineering
This module introduces students to the materials, properties and design processes using timber and masonry construction. Eurocodes are used for the design of elements. Proprietary computer programmes are used alongside hand calculations. New techniques are introduced and discussed.

- Structural dynamics and earthquake engineering
The module aims to develop a thorough understanding of causes and nature of vibration in structures and to enable students to analyse the response of a structure under earthquake loadings.

- Advanced computing and structural simulation
The module will enable the students to use the advanced Finite Element Analysis (FEA) software (ANSYS) for modelling steel, reinforced concrete and composite structures. Both material and geometrical nonlinearities will be considered which link the complex structural system.

- Project / dissertation
This module is one third of the course and is an individually supervised piece of work that is typically either a research project or an innovative design exercise. The theme is related to topics covered on the course.

Employability

Employment prospects for graduates of Structural Engineering are strong. Successful students will enter into a variety of positions with employers which might include: structural engineer, consultant, project manager, government advisor and researcher.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

- direct engagement from employers who come in to interview and talk to students
- Job Shop and on-campus recruitment agencies to help your job search
- mentoring and work shadowing schemes.

Professional links

This degree is an accredited MSc (Technical) course by the Joint Board of Moderators as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

Read less
This programme (See http://www.postgraduate.hw.ac.uk/prog/msc-advanced-mechanical-engineering/ ) aims to develop the knowledge and skills of a Bachelor’s-level graduate Mechanical Engineering to Masters level through advanced teaching, design work and research. Read more

Overview

This programme (See http://www.postgraduate.hw.ac.uk/prog/msc-advanced-mechanical-engineering/ ) aims to develop the knowledge and skills of a Bachelor’s-level graduate Mechanical Engineering to Masters level through advanced teaching, design work and research. As such it is also an opportunity for candidates from a different Engineering background to develop key Mechanical Engineering knowledge and skills required for their professional development. A key objective of the programme is to be an accredited route to becoming Chartered Engineer.

This programme makes use of masters-level courses in the Energy Sciences and Manufacture & Design complemented with specialist courses from relevant MSc courses offered by the institute. We have seen a growing need for an advanced mechanical engineering programme at the request of applicants, and our industry partners. This programme has been specifically developed to meet this need and to encourage students of this field into further learning.

The Scottish Funding Council has made available 20 scholarships covering fees only to students with Scottish backgrounds. 6 of these places are reserved for applicants to this programme in the first instance. The remaining places are spread over all our Energy based MSc programmes. There is no separate application process for this. If you are eligible, you will be considered automatically. You will be notified through the summer if you have been selected.

Programme content

Semester One - Mandatory
- B81PI Professional and Industrial Studies
This course is specifically designed to meet the master’s level outcome requirements in the areas of professional development and practice for chartered engineering status. This multi-disciplinary course uses industrial speakers and speakers from those in the university involved in bridging the gap between academia and industrial application.

- B51GS Specialist Engineering Technologies 1
The first of the specialist engineering technologies courses is based on computational fluid dynamics and assessed by a group project

Optional (Choose two)
- B51DE Engineering Design
In this course students interact with companies in a real life small R&D project supplied by the industrial partners. Working in teams, the students have to manage the design of a prototype, product or system and interact with the industrial contact putting into practice problem-solving skills from other engineering topics studied elsewhere in the programme.

- B51EK Fluids 1
Fluid mechanics applied to aerodynamics, including ideal flows, boundary layers, and aerofoils and their use for analysis and design purposes.

- B51EM Advanced Mechanics of Materials 1
Advanced classical mechanics including 3D stress and strain with particular application to thin walled vessels. Fatigue analysis and design for fatigue limit.

- B51EO Dynamics 1
To provide students with a thorough understanding of vibration theory and an appreciation of its application in an engineering environment

- B51EQ Thermodynamics 1
Thermodynamic cycles including heat engines and reverse heat engines and means of evaluating best performance.

- G11GA Flame Appraisal
Introduction to the stages required for evaluating an oilfield for production. This covers geological considerations and fluid flow from oil bearing rock.

Semester Two – Mandatory

- B81EZ Critical Analysis and Research Preparation
This course provides research training and addresses literature review skills, project planning, data analysis and presentation with a focus to critically discuss literature, and use data to support an argument.

- B51HB Failure Accident Analysis
To acquaint students with the potential causes of material, structure or component failure; framework under which a failure or forensic engineering investigation should be carried out and give them the opportunity to work case studies through from information-gathering to preparation of reports and an awareness of fire and explosion engineering.

- B51GT Specialist Engineering Technologies 2
To present advanced theory and practice in important or emerging areas of technology including non-linear final element materials to include contact mechanics, design of components subjected to high stress applications.

Optional (Choose one)
- B51EL Fluids 2
To provide a methodology for analysing one-dimensional compressible flow systems.

- B51EN Advanced Mechanics of Materials 2
To provide students with an opportunity to: carry out advanced analyses of mechanics of materials problems; analyse mechanics of materials where time is a significant additional variable; use final element analysis for cases involving viscoelasticity and complex geometry
engage with the findings of recent research in a mechanics of materials topic

- B51EP Dynamics 2
To provide students with a thorough understanding of control theory and an appreciation of the subject of environmental acoustics and passive noise control

- B51ER Thermodynamics 2
Investigation of heat transfer mechanisms with a view to the design of effective heat exchangers for given operating conditions. The study of radiation heat transfer and combustion equilibrium.

- B51DF Engineering Manufacture
To provide the student with a detailed understanding of the importance and integration of advanced manufacturing technology and manufacturing systems within the context of product engineering. On completion, the students should have acquired a detailed understanding of the product development process from initial conception through to product support as well as appreciate the impact of each stage of the process on the business and organisationally with respect to information dependence and manufacturing processes employed.

- G11GD Flame Development
A continuation of Flame Appraisal, this course looks at the well-head arrangement for oil extraction. This is an introduction to drilling engineering and the techniques required for oil extraction.

Semester 3 – Mandatory

- B51MD Masters Dissertation
An individual project led by a research active member of staff on a current research theme with the aim of leading to the production of a journal article.

Find information on Fees and Scholarships here http://www.postgraduate.hw.ac.uk/prog/msc-advanced-mechanical-engineering/

Scholarships available

We have a number of fully funded Scottish Funding Council (SFC) scholarships available for students resident in Scotland applying for Advanced Mechanical Engineering. Find out more about this scholarship and how to apply http://www.hw.ac.uk/student-life/scholarships/postgraduate-funded-places.htm .

Read less
Today, structural engineering is more than just design. Expert consultants are needed globally with a complete skill set; the ability to design, manage and maintain structures, but also to enable existing civil infrastructure to operate under changing loading and environment. Read more
Today, structural engineering is more than just design. Expert consultants are needed globally with a complete skill set; the ability to design, manage and maintain structures, but also to enable existing civil infrastructure to operate under changing loading and environment.

This programme will provide you with a solid understanding of the whole process of structural design, analysis and operation. You will discover how to design and manage the dynamic behaviour of structures using state of the art hardware and software for performance assessment, measurement, and instrumentation to withstand normal and extreme operational loads.

The programme is taught by our internationally leading academic team with expertise in structural performance analysis and health monitoring, structural dynamics, control, infrastructure management, systems and informatics.

Successful graduates will be equipped with specialist skills increasingly demanded by employing infrastructure consultants, contractors, operators, and government agencies and can expect to progress into international senior level positions in civil, construction and environmental industries.

Programme Structure

This programme is modular and flexible and consists of nine core engineering modules.

Core modules

The core modules can include; Structural Design; Software Modelling; Conceptual Design of Buildings; Conceptual Design of Bridges; Active and Passive Structural Control; Vibration Engineering; Structural Health and Performance Monitoring; Introduction to Earthquake Engineering and Structural Engineering Dissertation

The modules listed here provide examples of what you can expect to learn on this degree course based on recent academic teaching. The precise modules available to you in future years may vary depending on staff availability and research interests, new topics of study, timetabling and student demand

Teaching and assessment

The programme is delivered through a mix of lectures, seminars, tutorials, industrial presentations, case studies, industry visits, computer simulations, project work and a dissertation. It has particular value in developing transferable skills development including management skills, communication skills, computational techniques, data handling and analysis, problem solving, decision making and research methodology. Many of these skills will be addressed within an industrial and commercial context.

A world-class laboratory

The MSc Structural Engineering programme will take advantage of a cutting edge laboratory, with state of the art measurement and testing technology. This purpose-built teaching and research facility is dedicated to better understanding structural performance including in-situ testing and monitoring of prototype and real life structures. Featuring;
• Unique and reconfigurable prototype floor or footbridge structure weighing up to 15 tonnes
• Instruments capable of measuring static and dynamic structural movements from meter to nanometer
• Ambient and forced vibration testing, facilities including equipment and software
• Vibration control systems
• Individual and group human motion tracking and measurement systems
• Motion capture facilities

Read less
This programme enables you to focus on developing your technical engineering skills, as well as your management skills. Today, structural engineering is more than just design. Read more
This programme enables you to focus on developing your technical engineering skills, as well as your management skills

Today, structural engineering is more than just design. Expert consultants are needed globally with a complete skill set; the ability to design, manage and maintain structures, but also to enable existing civil infrastructure to operate under changing loading and environment.

Alongside the core engineering modules, you will also study two management modules taught by the Business School which will help you develop transferable professional management skills that will enhance your study experience and improve your career prospects.

This programme will provide you with a solid understanding of the whole process of structural design, analysis and operation. You will discover how to design and manage the dynamic behaviour of structures using state of the art hardware and software for performance assessment, measurement, and instrumentation to withstand normal and extreme operational loads.

The programme is taught by our internationally leading academic team with expertise in structural performance analysis and health monitoring, structural dynamics, control, infrastructure management, systems and informatics.

Successful graduates will be equipped with specialist skills increasingly demanded by employing infrastructure consultants, contractors, operators, and government agencies and can expect to progress into international senior level positions in civil, construction and environmental industries.

Programme Structure

This programme is modular and flexible and consists of eight core engineering modules and one option module.

Core modules

The core modules can include; Structural Design; Software Modelling; Conceptual Design of Buildings; Conceptual Design of Bridges; Active and Passive Structural Control; Vibration Engineering; Management Concepts and Structural Engineering Dissertation

Optional modules

Some examples of the optional modules are Strategic Innovation Management and Strategy.

The modules listed here provide examples of what you can expect to learn on this degree course based on recent academic teaching. The precise modules available to you in future years may vary depending on staff availability and research interests, new topics of study, timetabling and student demand

Teaching and assessment

The programme is delivered through a mix of lectures, seminars, tutorials, industrial presentations, case studies, industry visits, computer simulations, project work and a dissertation. It has particular value in developing transferable skills development including management skills, communication skills, computational techniques, data handling and analysis, problem solving, decision making and research methodology. Many of these skills will be addressed within an industrial and commercial context.

A world-class laboratory

The MSc Structural Engineering programme will take advantage of a cutting edge laboratory, with state of the art measurement and testing technology. This purpose-built teaching and research facility is dedicated to better understanding structural performance including in-situ testing and monitoring of prototype and real life structures. Featuring;
• Unique and reconfigurable prototype floor or footbridge structure weighing up to 15 tonnes
• Instruments capable of measuring static and dynamic structural movements from meter to nanometer
• Ambient and forced vibration testing, facilities including equipment and software
• Vibration control systems
• Individual and group human motion tracking and measurement systems
• Motion capture facilities

Read less
This course provides education and training in selected weapons systems. The course is intended for officers of the armed forces and for scientists and technical officers in government defence establishments and the defence industry. Read more

Course Description

This course provides education and training in selected weapons systems. The course is intended for officers of the armed forces and for scientists and technical officers in government defence establishments and the defence industry. It is particularly suitable for those who, in their subsequent careers, will be involved with the specification, analysis, development, technical management or operation of weapons systems.

The course is accredited by the Institution of Mechanical Engineers and will contribute towards an application for chartered status.

Overview

The Gun System Design MSc is part of the Vehicle and Weapons Engineering Programme. The course is designed to provide an understanding of the technologies used in the design, development, test and evaluation of gun systems.

This course offers the underpinning knowledge and education to enhance the student’s suitability for senior positions within their organisation.

Each individual module is designed and offered as a standalone course which allows an individual to understand the fundamental technology required to efficiently perform the relevant, specific job responsibilities. The course provides students with the depth of knowledge to undertake engineering analysis or the evaluation of relevant sub systems.

Duration: Full-time MSc - one year, Part-time MSc - up to three years, Full-time PgCert - one year, Part-time PgCert - two years, Full-time PgDip - one year, Part-time PgDip - two years

English Language Requirements

If you are an international student you will need to provide evidence that you have achieved a satisfactory test result in an English qualification. The minimum standard expected from a number of accepted courses are as follows:

IELTS - 6.5
TOEFL - 92
Pearson PTE Academic - 65
Cambridge English Scale - 180
Cambridge English: Advanced - C
Cambridge English: Proficiency - C

In addition to these minimum scores you are also expected to achieve a balanced score across all elements of the test. We reserve the right to reject any test score if any one element of the test score is too low.

We can only accept tests taken within two years of your registration date (with the exception of Cambridge English tests which have no expiry date).

Course overview

This MSc course is made up of two essential components, the equivalent of 12 taught modules (including some double modules, typically of a two-week duration), and an individual project.

Modules

MSc and PGDip students take 11 compulsory modules and 1 optional module.
PGCert students take 4 compulsory modules and 2 optional modules.

Core:
- Element Design
- Fundamentals of Ballistics
- Finite Element Methods in Engineering
- Gun System Design
- Light Weapon Design
- Military Vehicle Propulsion and Dynamics
- Modelling, Simulation and Control
- Solid Modelling CAD
- Survivability
- Vehicle Systems Integration

Optional:
- Guided Weapons
- Military Vehicle Dynamics
- Reliability and System Effectiveness
- Uninhabited Military Vehicle Systems

Individual Project

In addition to the taught part of the course, students can opt either to undertake an individual project or participate in a group design project. The aim of the project phase is to enable students to develop expertise in engineering research, design or development. The project phase requires a thesis to be submitted and is worth 80 credit points.

Examples of recent titles are given below.
- Use of Vibration Absorber to help in Vibration
- Validated Model of Unmanned Ground Vehicle Power Usage
- Effect of Ceramic Tile Spacing in Lightweight Armour systems
- Investigation of Suspension System for Main Battle Tank
- An Experimental and Theoretical Investigation into a Pivot Adjustable Suspension System as a Low Cost Method of Adjusting for Payload
- Analysis of Amphibious Operation and Waterjet Propulsions for Infantry Combat Vehicle.
- Design of the Light Weapon System
- Analysis of the Off-road Performance of a Wheeled or Tracked Vehicle

Group Project

- Armoured Fighting Vehicle and Weapon Systems Study
To develop the technical requirements and characteristics of armoured fighting vehicles and weapon systems, and to examine the interactions between the various sub-systems and consequential compromises and trade-offs.

Syllabus/curriculum:
- Application of systems engineering practice to an armoured fighting vehicle and weapon system.
- Practical aspects of system integration.
- Ammunition stowage, handling, replenishment and their effects on crew performance and safety.
- Applications of power, data and video bus technology to next generation armoured fighting vehicles.
- Effects of nuclear, biological and chemical attack on personnel and vehicles, and their survivability.

- Intended learning outcomes
On successful completion of the group project the students should be able to –
- Demonstrate an understanding of the engineering principles involved in matching elements of the vehicle and weapon system together.
- Propose concepts for vehicle and weapon systems, taking into account incomplete and possibly conflicting user requirements.
- Effectively apply Solid Modelling in outlining proposed solutions.
- Interpret relevant legislation and standards and understand their relevance to vehicle and weapon systems.
- Work effectively in a team, communicate and make decisions.
- Report the outcome of a design study orally to a critical audience.

Assessment

Continuous assessment, examinations and thesis (MSc only). Approximately 30% of the assessment is by examination.

Career opportunities

Many previous students have returned to their sponsor organisations to take up senior programme appointments and equivalent research and development roles in this technical area.

For further information

On this course, please visit our course webpage - https://www.cranfield.ac.uk/Courses/Masters/Gun-Systems-Design

Read less
This course provides education and training in military vehicle systems. The course is intended for officers of the armed forces and for scientists and technical officers in government defence establishments and the defence industry. Read more

Course Description

This course provides education and training in military vehicle systems. The course is intended for officers of the armed forces and for scientists and technical officers in government defence establishments and the defence industry. It is particularly suitable for those who, in their subsequent careers, will be involved with the specification, analysis, development, technical management or operation of military vehicles.

It will provide students with the technical knowledge and understanding of weapon systems and military vehicles to make them effective in their specification, design, development and assessment.

The course is accredited by the Institute of Mechanical Engineers and will contribute towards an application for chartered status.

Course overview

This course is made up of two essential components, the equivalent of 12 taught modules (including some double modules, typically of a two week duration).

In addition to the taught part of the course, students undertake an individual project . The aim of the project phase is to enable students to develop expertise in engineering research, design or development. The project phase requires a thesis to be submitted and is worth 80 credit points.

Earning the appropriate credits can lead to the following academic awards:

- Postgraduate Certificate (PgCert) – any combination of modules (building a total of 60 credits).
- Postgraduate Diploma (PgDip) – all modules (120 credits).
- Master of Science (MSc) – all modules (120 credits) plus project (80 credits).

The Military Vehicle Technology MSc is part of the Vehicle and Weapons Engineering Programme. The course is designed to provide an understanding of the technologies used in the design, development, test and evaluation of military vehicle systems. Both armoured and support vehicles are covered within the course.

This course offers the underpinning knowledge and education to enhance the student’s suitability for senior positions within their organisation.

Each individual module is designed and offered as a standalone course which allows an individual to understand the fundamental technology required to efficiently perform the relevant, specific job responsibilities. The course also offers a critical depth to undertake engineering analysis or the evaluation of relevant sub systems.

Individual Project

In addition to the taught part of the course, students undertake an individual project. The aim of the project phase is to enable students to develop expertise in engineering research, design or development. The project phase requires a thesis to be submitted and is worth 80 credit points.

Examples of current titles are given below:

- Use of Vibration Absorber to help in Vibration
- Validated Model of UGV Power Usage
- Effect of Ceramic Tile Spacing in Lightweight Armour systems
- Investigation of Suspension System for Main Battle Tank
- An Experimental and Theoretical Investigation into a Pivot Adjustable Suspension System as a Low Cost Method of Adjusting for Payload
- Analysis of Amphibious Operation and Waterjet Propulsions for Infantry Combat Vehicle.
- Optimisation of the suspension system for a vehicle.
- Analysis of the off-road performance of a wheeled or tracked vehicle.

Modules

Core -

Introductory Studies
Solid Modelling CAD
Finite Element Methods in Engineering
Modelling, Simulation and Control
Weapon System Technology
Survivability
Vehicle Systems Integration
Armoured Fighting Vehicle and Weapon Systems Study
Military Vehicle Dynamics
Military Vehicle Propulsion

Optional -

Fundamentals of Ballistics
Military Vehicle Propulsion and Dynamics
Gun System Design
Element Design
Guided Weapons
Uninhabited Military Vehicle Systems
Reliability and System Effectiveness
Light Weapon Design
Rocket Motors and Propellants

Assessment

Continuous assessment, examinations and thesis (MSc only). Approximately 30% of the assessment is by examination.

Funding

For more information on funding please contact

Career opportunities

Many previous students have returned to their sponsor organisations to take-up senior programme appointments and equivalent research and development roles in this technical area.

Further Information

For further information on this course, please visit our course webpage - http://www.cranfield.ac.uk/courses/masters/military-vehicle-technology.html

Read less
The aim of the programme is to equip non-engineering graduates with a STEM background to meet the stringent demands of today’s highly competitive industrial environment. Read more
The aim of the programme is to equip non-engineering graduates with a STEM background to meet the stringent demands of today’s highly competitive industrial environment. On completion of these courses students acquire a broad understanding of Engineering with a focus on aerospace engineering.

The University has been running automotive degree courses for almost forty years and is very well-established within the automotive industry. We have some 250 undergraduate and postgraduate students reading automotive engineering so are one of the largest providers of automotive engineering degree courses in the UK. We have excellent facilities in automotive engineering technology including an automotive centre with engine test facilities.

The development of skills and advancement of knowledge focus on:
-The selection of materials, process and techniques for the structural analysis and the design and construction of automotive components such as body and chassis, in relation to vibration and vehicle dynamics
-Understanding of alternative power train and fuel technologies, their impact on vehicle performance and environment
-The construction of CAE models and to assess implications of the results, the limitations of present techniques and the potential future direction of developments in the CAE field
-Appreciation of the need for process and product development relevant to the introduction of products in a cost effective and timely manner
-Critical review of the present knowledge base, its applicability, usage and relevance to enhance product and enterprise performance

Why choose this course?

This pioneering programme consists of a number of “specialist” Masters awards with an expectation that students will have studied a STEM related discipline to a Bachelor’s level or equivalent, as opposed to a “traditional” masters philosophy aimed at students from an engineering background. The programme offers options with separate entry routes for candidates transitioning from ‘Near STEM’ and ‘Far STEM’ disciplines:The Far STEM route is for first degrees where statistical analysis was a dominant feature of their analytical studies. Students will spend one to two semesters studying appropriate Level 4/5 modules in the first year then joining the Near STEM cohort (e.g., chemistry or biology). The Far STEM route is for first degrees where statistical analysis was a dominant feature of their analytical studies. Students will spend one to two semesters studying appropriate Level 4/5 modules in the first year then joining the Near STEM cohort (e.g., chemistry or biology).

Careers

The successful postgraduates of the programme will acquire the knowledge and understanding, intellectual, practical and transferable skills necessary for the analysis and synthesis of problems in engineering through a combination of experimental, simulation, research methods and case studies. They can expect to gain work in a range of disciplines within a variety of industries from specialist technical roles to positions of management responsibility.

Teaching methods

The School has a reputation for innovation in teaching and learning, where nearly all MSc modules are delivered through a combination of traditional face-to-face teaching and backup tutorial's using the University's StudyNet web based facility.
The online StudyNet is accessible 24/7 and allows students to access electronic teaching and learning resources, and conduct electronic discussion's with staff and other students. A heavy emphasis is placed on theory and practice, and the School has a policy of using industrial standard software wherever possible. The School also operate an open access laboratory, and computer policy, that will help students complete coursework and assignments, at a scheduled pace and on time.

Structure

Year 1
Core Modules
-Automotive Materials & Manufacture
-CFD Techniques
-Computing for Business and Technology
-Dynamics
-Engineering Application of Mathematics
-Engineering Fundamentals
-Mechanical Experimental Engineering
-Mechanical Science
-Operations Management

Year 2
Core Modules
-Advanced Engines & Power Systems
-Automotive Chassis & Powertrain Technology
-Automotive Dynamics & Safety
-Automotive Electrical Systems
-Integrated Product Engineering
-Operations Research

Read less
The aim of the programme is to equip non-engineering graduates with a STEM background to meet the stringent demands of today’s highly competitive industrial environment. Read more
The aim of the programme is to equip non-engineering graduates with a STEM background to meet the stringent demands of today’s highly competitive industrial environment. On completion of these courses students acquire a broad understanding of Engineering with a focus on aerospace engineering.

The University has been running automotive degree courses for almost forty years and is very well-established within the automotive industry. We have some 250 undergraduate and postgraduate students reading automotive engineering so are one of the largest providers of automotive engineering degree courses in the UK. We have excellent facilities in automotive engineering technology including an automotive centre with engine test facilities.

The development of skills and advancement of knowledge focus on:
-The selection of materials, process and techniques for the structural analysis and the design and construction of automotive components such as body and chassis, in relation to vibration and vehicle dynamics
-Understanding of alternative power train and fuel technologies, their impact on vehicle performance and environment
-The construction of CAE models and to assess implications of the results, the limitations of present techniques and the potential future direction of developments in the CAE field
-Appreciation of the need for process and product development relevant to the introduction of products in a cost effective and timely manner
-Critical review of the present knowledge base, its applicability, usage and relevance to enhance product and enterprise performance

Why choose this course?

This pioneering programme consists of a number of “specialist” Masters awards with an expectation that students will have studied a STEM related discipline to a Bachelor’s level or equivalent, as opposed to a “traditional” masters philosophy aimed at students from an engineering background. The programme offers options with separate entry routes for candidates transitioning from ‘Near STEM’ and ‘Far STEM’ disciplines:The Far STEM route is for first degrees where statistical analysis was a dominant feature of their analytical studies. Students will spend one to two semesters studying appropriate Level 4/5 modules in the first year then joining the Near STEM cohort (e.g., chemistry or biology). The Near STEM route is for admission of relevant first degree candidates and whose programme would have made extensive use of applied mathematics to design and explain engineering and/or scientific concepts (e.g., physics or maths).

Careers

The successful postgraduates of the programme will acquire the knowledge and understanding, intellectual, practical and transferable skills necessary for the analysis and synthesis of problems in engineering through a combination of experimental, simulation, research methods and case studies. They can expect to gain work in a range of disciplines within a variety of industries from specialist technical roles to positions of management responsibility.

Teaching methods

The School has a reputation for innovation in teaching and learning, where nearly all MSc modules are delivered through a combination of traditional face-to-face teaching and backup tutorial's using the University's StudyNet web based facility.
The online StudyNet is accessible 24/7 and allows students to access electronic teaching and learning resources, and conduct electronic discussion's with staff and other students. A heavy emphasis is placed on theory and practice, and the School has a policy of using industrial standard software wherever possible. The School also operate an open access laboratory, and computer policy, that will help students complete coursework and assignments, at a scheduled pace and on time.

Structure

Year 1
Core Modules
-Advanced Engines & Power Systems
-Automotive Chassis & Powertrain Technology
-Automotive Dynamics & Safety
-Automotive Materials & Manufacture
-CFD Techniques
-Dynamics
-Operations Management
-Operations Research

Year 2
Core Modules
-Individual Masters Project

Read less
This course is designed to provide an advanced level of knowledge and understanding in mechanics, materials selection, manufacturing, mechatronics, control, plus computer-aided design and engineering techniques to design and develop integrated mechanical systems. Read more
This course is designed to provide an advanced level of knowledge and understanding in mechanics, materials selection, manufacturing, mechatronics, control, plus computer-aided design and engineering techniques to design and develop integrated mechanical systems.

Professional Accreditation

This course is accredited by the Institution of Mechanical Engineers.

Why Bradford?

-This course is accredited by the Institution of Mechanical Engineers
-The course is carefully designed to ensure all-round growth of the student – developing intellectual knowledge and understanding, discipline-specific expertise, as well as personal and transferable skills. Graduates gain technical depth, and broadening in terms of the ability to innovate, exposure to other branches of engineering, and enhanced research skills. In addition, leadership and managerial strengths are cultivated that can lead to Chartered Engineer (CEng) status.
-Participants benefit from learning advanced principles of the design and control of mechanical systems along with computational and simulation methods to ensure reliability and robustness of mechanical systems. They will gain knowledge in vibration, computational fluid dynamics, and manufacturing simulation. Students will learn to use industry-standard computational tools and analysis packages in the advanced analysis, design and evaluation of complex mechanical systems and numerical methods for modelling and analysing engineering problems.

[[Modules
-Interdisciplinary Competitive Design
-Engineering Vibration
-Design Optimisation
-Materials & Manufacturing Processes
-Advanced Manufacturing Technology
-Computational Fluid Dynamics
-Research Skills
-Advanced Solid Mechanics
-Polymer Engineering
-Supply Chain Management
-Engineering Computational Methods
-MSc Project

Career support and prospects

The University is committed to helping students develop and enhance employability and this is an integral part of many programmes. Specialist support is available throughout the course from Career and Employability Services including help to find part-time work while studying, placements, vacation work and graduate vacancies. Students are encouraged to access this support at an early stage and to use the extensive resources on the Careers website.

Discussing options with specialist advisers helps to clarify plans through exploring options and refining skills of job-hunting. In most of our programmes there is direct input by Career Development Advisers into the curriculum or through specially arranged workshops.

Our graduates find employment in a very wide range of engineering and manufacturing environments, from the aerospace, transportation and automotive sectors to process industries such as oil and gas, utility companies (e.g. water and electricity), as well as research and development. Employers of recent graduates include Ford Motor Company, Cummins, Jaguar Land Rover, Rolls-Royce and Cameron.

Read less
This course is designed to respond to a growing shortage of workforce in manufacturing sector. Read more

Why take this course?

This course is designed to respond to a growing shortage of workforce in manufacturing sector. It intends to equip our students with relevant and up-to-date knowledge and skills of advanced design tools, materials, manufacturing processes and systems in conjunction with developing efficient operation and effective management skills. Integrating these will ensure our students to develop the technological and practical ability to meet manufacturing demand for product, company and market needs.

What will I experience?

On this course you can:

Use simulation and modelling application software for virtual design and manufacturing
Utilise our strong links with companies and investigate real industrial problems to enhance your understanding of the profession
Tie in the topic of your individual project with one of our research groups and benefit from the expertise of our actively researching academics

What opportunities might it lead to?

This course has been accredited by the Institution of Mechanical Engineers (IMechE) meeting the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). It will provide you with some of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng).

Here are some routes our graduates have pursued:

Design
Research and development
Product manufacture
Project management

Module Details

This course aims to provide you with the inter-disciplinary knowledge, attributes and skills necessary to apply the principles of advanced manufacturing systems within the manufacturing industry. You will study several key topics and also complete a four-month individual project tailored to your individual interests that can take place in our own laboratories or, by agreement, in industry.

Here are the units you will study:

Integrated Manufacturing Systems: Systems concepts and techniques are developed in logistics and manufacturing areas with a strong emphasis on simulation techniques and practical case study analysis.

Operations and Quality Management: A strategic approach is used with modern inventory and supply chain management and logistics tools and techniques. Management strategies are developed for quality, including quality systems and quality control.

Advanced Materials: This unit is designed to deal with a wide range of advanced materials for engineering applications. Teaching will address analytical and numerical methods to assess the strength, stiffness, toughness, non-linearity behaviours, vibration and failures of engineering materials for component and structure design.

Supply Chain Management: Supply chain management involves the coordination of production, inventory, location and transportation, among participants in a supply chain. This unit considers the principles and tools of supply chain management, with an emphasis on lean six sigma methods.

Virtual Systems Design and Simulation for Production: This unit is particularly designed to enhance students’ analytical knowledge and practical skills focusing on a sustainable development of systematic approaches and lean production methods to support manufacturing systems analysis, design and performance evaluation with an aid of using advanced computer design and modelling simulation tools.

CAD/CAM Systems: An integrated approach is used towards CAD and CAM. Significant practical hands-on experience is given with commercial level software. Emphasis is placed on case study analysis and system selection and evaluation.

Individual Project: A strong feature that comprises a third of the course. You will be encouraged to undertake projects where possible in industrial companies. However, we also use our extensive resources and staff skills to undertake them within the University.

Programme Assessment

You will be taught through a mixture of lectures, seminars, tutorials (personal and academic), laboratory sessions and project work. The course has a strong practical emphasis with a significant amount of your time spent our laboratories. We pride ourselves on working at the leading-edge of technology and learning practices.

A range of assessment methods encourages a deeper understanding of engineering and allows you to develop your skills. Here’s how we assess your work:

Written examinations
Coursework
Laboratory-based project work
A major individual project/dissertation

Student Destinations

The demand for more highly skilled manufacturing engineers is always present and it is generally accepted that there is a current shortage of engineers.

This course has a record of almost 100 per cent of our graduates gaining employment in relevant areas such as manufacturing and logistics management, systems engineering, production engineering, design engineering and project management. You could work for a large company, in the Armed Forces or in one of the many small companies within this sector. You could even start your own specialist company.

Roles our graduates have taken on include:

Manufacturing engineer
Product design engineer
Aerospace engineer
Application engineer

Read less
Learn the analytical and design skills needed to create successful structures in challenging environments. This is the largest academic concrete research centre in the UK so you’ll benefit from some great facilities. Read more

About the course

Learn the analytical and design skills needed to create successful structures in challenging environments.

This is the largest academic concrete research centre in the UK so you’ll benefit from some great facilities.

We have international-level expertise in cement chemistry, aggregate science, binder technology, concrete durability, alternative concrete materials, structural performance and design, earthquake and nuclear reactor design, and finite element analysis.

About us

We are one of the largest and most active civil engineering departments in the UK. All our masters courses are informed by our own world-leading research and industry needs. The 2014 Research Excellence Framework (REF) puts us in the UK top four.

Our structures-based courses are accredited by The Institution of Civil Engineers, Institution of Structural Engineers, Chartered Institution of Highways and Transportation, and Institute of Highway Engineers as satisfying part 2 academic base requirements for a Chartered Engineer under UK-SPEC.

Your career

Our graduates work for top UK and international consultancies, contractors, regulators, universities and other private and public sector organisations.

Many of them join engineering consultancies, in roles such as Structural Engineer, Building Services Engineer and Sustainability Consultant. Some join architecture practices. Employers include Arup, Buro Happold, Capita Symonds, Roger Preston and Partners, Cundall and Foster and Partners.

Core modules

Linear Systems and Structural Analysis
Structural Dynamics (Earthquakes and Vibration)
Computational Structural 
Analysis and Research Skills
Advanced Concrete Design
Sustainable Concrete Technology
Innovations in Structural Concrete
Structural Design

Examples of optional modules

Blast and Impact Effects on Structures
Advanced Simulation of High Strain Rate Dynamics
Geotechnical Design

Teaching and assessment

Lectures, design tutorials, computational tutorials, lab work and industrial seminars.

All courses use lectures by academic staff and industrial partners, laboratory work, site visits, design projects and dissertation. Assessment is by formal examinations, coursework assignments and a dissertation with oral examination.

September–June: taught modules and preparation for your dissertation.
June–August: complete your dissertation.

Your research dissertation gives you the opportunity to work with an academic on a piece of research in a subdiscipline. We’ll give you training in research skills.

Read less
The civil engineers of the future will have to find innovative solutions to environmental challenges. We believe graduates from our MSc will be at the forefront of the new generation. Read more

About the course

The civil engineers of the future will have to find innovative solutions to environmental challenges. We believe graduates from our MSc will be at the forefront of the new generation.

The core modules give you a grounding in engineering analysis and design. In the second semester, you can follow your interests and choose from a list of specialist modules.

About us

We are one of the largest and most active civil engineering departments in the UK. All our masters courses are informed by our own world-leading research and industry needs. The 2014 Research Excellence Framework (REF) puts us in the UK top four.

Our structures-based courses are accredited by The Institution of Civil Engineers, Institution of Structural Engineers, Chartered Institution of Highways and Transportation, and Institute of Highway Engineers as satisfying part 2 academic base requirements for a Chartered Engineer under UK-SPEC.

Your career

Our graduates work for top UK and international consultancies, contractors, regulators, universities and other private and public sector organisations.

Many of them join engineering consultancies, in roles such as Structural Engineer, Building Services Engineer and Sustainability Consultant. Some join architecture practices. Employers include Arup, Buro Happold, Capita Symonds, Roger Preston and Partners, Cundall and Foster and Partners.

Specialist facilities

Our laboratories are equipped to a very high standard:

Large-scale tri-axial apparatus for stress path and cyclic load testing; flexible walled tri-axial calibration chambers; optical microscopy, digital camera and measurement software; model pile testing and durability testing facilities. We have recently established the Centre for Energy and Infrastructure Ground Research that is home to our world leading 4m diameter beam centrifuge and complementary £1m teaching facility.

Core modules

Linear Systems and Structural Analysis
Structural Dynamics (Earthquakes and Vibration)
Computational Structural Analysis and Research Skills
Structural Design
Design of Earthquake Resistant Structures
Advanced Simulation of High Strain Rate Dynamics

Examples of optional modules

Advanced Concrete Design
Sustainable Concrete Technology
Structural Design and Fire Resistance
Innovations in Structural Concrete
Blast and Impact Effects on Structures
Geotechnical Design

Teaching and assessment

Lectures, design tutorials, computational tutorials, lab work and industrial seminars.

All courses use lectures by academic staff and industrial partners, laboratory work, site visits, design projects and dissertation. Assessment is by formal examinations, coursework assignments and a dissertation with oral examination.

September–June: taught modules and preparation for your dissertation.
June–August: complete your dissertation.

Your research dissertation gives you the opportunity to work with an academic on a piece of research in a subdiscipline. We’ll give you training in research skills.

Read less
Develop skills in the analysis and design of steel and concrete structures. You can tailor the course to your specific interests, so it’s ideal for practising structural engineers who want to enhance their skills or for anyone pursuing a career in this field. Read more

About the course

Develop skills in the analysis and design of steel and concrete structures. You can tailor the course to your specific interests, so it’s ideal for practising structural engineers who want to enhance their skills or for anyone pursuing a career in this field.

About us

We are one of the largest and most active civil engineering departments in the UK. All our masters courses are informed by our own world-leading research and industry needs. The 2014 Research Excellence Framework (REF) puts us in the UK top four.

Our structures-based courses are accredited by The Institution of Civil Engineers, Institution of Structural Engineers, Chartered Institution of Highways and Transportation, and Institute of Highway Engineers as satisfying part 2 academic base requirements for a Chartered Engineer under UK-SPEC.

Your career

Our graduates work for top UK and international consultancies, contractors, regulators, universities and other private and public sector organisations.

Many of them join engineering consultancies, in roles such as Structural Engineer, Building Services Engineer and Sustainability Consultant. Some join architecture practices. Employers include Arup, Buro Happold, Capita Symonds, Roger Preston and Partners, Cundall and Foster and Partners.

Core modules

Linear Systems and Structural Analysis; Structural Design; Computational Structural Analysis and Research Skills; Structural Dynamics and Applications to Earthquake Engineering and Vibration.

Examples of optional modules

Innovations in Structural Concrete; Advanced Concrete Design; Structural Design and Fire Resistance of Medium Rise Steel-framed Buildings; Advanced Simulation of High Strain Rate Dynamics; Blast and Impact Effects on Structures; Design of Earthquake Resistant Structures; Geotechnical Design; Sustainable Concrete Technology.

Teaching and assessment

Lectures, design tutorials, computational tutorials, lab work and industrial seminars.

All courses use lectures by academic staff and industrial partners, laboratory work, site visits, design projects and dissertation. Assessment is by formal examinations, coursework assignments and a dissertation with oral examination.

September–June: taught modules and preparation for your dissertation.
June–August: complete your dissertation.

Your research dissertation gives you the opportunity to work with an academic on a piece of research in a subdiscipline. We’ll give you training in research skills.

Read less
This course is designed to respond to a growing shortage of workforce in mechanical engineering sectors. It intends to equip our students with relevant and up-to-date knowledge and skills for their engineering competencies and careers. Read more

Why take this course?

This course is designed to respond to a growing shortage of workforce in mechanical engineering sectors. It intends to equip our students with relevant and up-to-date knowledge and skills for their engineering competencies and careers. Students have a chance to broaden and deepen their knowledge in wide range of mechanical engineering subjects. This enables our students to undertake an advanced treatment of core mechanical engineering disciplines such as design and critical evaluation of structural integrity, computation fluid dynamics, advanced materials, energy and control systems.

What will I experience?

On this course you can:

Use simulation and modelling application software for virtual design and manufacturing
Utilise our strong links with companies and investigate real industrial problems to enhance your understanding of the profession
Tie in the topic of your individual project with one of our research groups and benefit from the expertise of our actively researching academics

What opportunities might it lead to?

This course has been accredited by the Institution of Mechanical Engineers (IMechE) and Institution of Engineering and Technology (IET), meeting the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). It will provide you with some of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng).

Here are some routes our graduates have pursued:

Design
Research and development
Product manufacture
Project management

Module Details

You will study several key topics that will help equip you to work as a mechanical engineer in a broad spectrum of mechanical engineering business activity management, research, design and development roles. You will also complete a four-month individual project tailored to your individual interests that can take place in our own laboratories or, by agreement, in industry.

Here are the units you will study:

Structural Integrity: Contemporary approaches are applied to the evaluation of mixed mode fracture and fatigue failure. Dynamic plastic responses of structures and the performance of composite structures are evaluated.

Industrial Control Systems: This unit covers mathematical representation of control system models is developed principally using Laplace transforms. System behaviour and simulation is analysed with practical case studies, leading to control system specifications.

Advanced Materials: This unit is designed to deal with a wide range of advanced materials for engineering applications. Teaching will address analytical and numerical methods to assess the strength, stiffness, toughness, non-linearity behaviours, vibration and failures of engineering materials for component and structure design.

Energy Systems: This unit is designed to study the principles and techniques of operation of thermodynamics and combustion systems, as well as the provision and management of energy. The current and future requirements and trends in energy production and consumption are addressed.

Structural Application of Finite Elements: The use of finite element analysis techniques and software applied to structural problems is developed. Modelling with both isotropic and orthotropic materials is investigated, as well as such topics as cracking in dissimilar materials and composite laminates.

Computational Fluid Dynamics: A practical case study analysis approach is used for model formulation and CFD simulation. Fundamental principles are used to appraise the results of CFD analysis of problems with industrial applications.

Individual Project: A strong feature of the course is the individual project, which comprises a third of the course. We encourage students to undertake projects in industrial companies, but we can also use our extensive resources and staff skills to undertake projects within the University.

Programme Assessment

You will be taught through a mixture of lectures, seminars, tutorials (personal and academic), laboratory sessions and project work. The course has a strong practical emphasis with a significant amount of your time spent our laboratories. We pride ourselves on working at the leading-edge of technology and learning practices.

A range of assessment methods encourages a deeper understanding of engineering and allows you to develop your skills. Here’s how we assess your work:

Written examinations
Coursework
Laboratory-based project work
A major individual project/dissertation

Student Destinations

The demand for more highly skilled mechanical engineers is always present and it is generally accepted that there is a current shortage of engineers.

When you graduate from this course you could find employment in a wide range of mechanical engineering-based careers, such as design, research and development and manufacturing. You could work for a large company, in the Armed Forces or in one of the many small companies within this sector. You could even start your own specialist company.

Roles our graduates have taken on include:

Mechanical engineer
Product design engineer
Aerospace engineer
Application engineer

Read less
The Mechanical Engineering MSc is designed to offer an advanced level of study in specific aspects of mechanical engineering that are in demand from industry. Read more
The Mechanical Engineering MSc is designed to offer an advanced level of study in specific aspects of mechanical engineering that are in demand from industry. The degree comprises study in analysis and design of power machinery systems, engineering structures, vibration, control and the use of computers in advanced engineering analysis.

Degree information

You will develop an advanced knowledge of mechanical engineering and associated disciplines, alongside an awareness of the context in which engineering operates, in terms of safety, environmental, social and economic aspects. Alongside this you will gain a range of intellectual, practical and transferable skills necessary to develop careers in this field.

Students undertake modules to the value of 180 credits.

The programme consists of six core modules (90 credits), optional modules (15 credits), and a research project (75 credits).

Core modules
-Advanced Computer Applications in Engineering
-Group Project
-Materials and Fatigue
-Vibrations, Acoustics and Control
-Project Management
-Power Transmission and Auxiliary Machinery Systems

Optional modules - one of the following subject to availability:
-Applied Thermodynamics and Turbomachinery
-Heat Transfer and Heat Systems
-New and Renewable Energy Systems

Dissertation/report
Culminating in a substantial dissertation, the research project, which often has industry input, focuses your research interests and develops high-level presentation and critical thinking skills.

Teaching and learning
This dynamic programme is delivered through a combination of lectures, seminars, tutorials and example classes all of which frequently draw upon real-life industrial case studies. Each module is assessed by coursework submission alone or a combination of examination and coursework. Some include an oral presentation of project or assignment work.

Careers

Engineering graduates with good analytical abilities are in high demand and our graduates have little difficulty gaining employment across many industries. The programme specifically aims to equip students with skills in analysis and design such that they can be employed as professional engineers in virtually any sector of the mechanical engineering industry.

Top career destinations for this degree:
-Foreign Exchange Analyst, JP Morgan
-Mechanical Engineer, Lloyds Register
-PhD Mechanical Engineering, University College London (UCL)
-Graduate Trainee Engineer, Rolls-Royce
-Mechanical Engineer, Shanghai Electric

Employability
Delivered by leading researchers from across UCL, you will definitely have plenty of opportunities to network and keep abreast of emerging ideas. Collaborating with companies and bodies such as the Ministry of Defence and industry leaders such as BAE Systems and Shell are key to our success and we will encourage you to develop networks through the programme itself and via the department’s careers programme which includes employer-led events and individual coaching. We equip our graduates with the skills and confidence needed to play a creative and leading role in the professional and research community.

Why study this degree at UCL?

UCL Mechanical Engineering scored highly in the UK's most recent Research Excellence Framework survey with research in such diverse areas as Formula 1, biomedical engineering and naval architecture. The department is located in the centre of one of the most dynamic cities in the world.

The department has an international reputation for the excellence of its research which is funded by numerous bodies including: the Royal Society, the Leverhulme Trust, UK Ministry of Defence, BAE Systems, Cosworth Technology, Shell, BP, Lloyds Register Educational Trust, and many others.

The Mechanical Engineering MSc has been accredited by the Institute of Mechanical Engineers (IMechE) and the Institute of Marine Engineering, Science & Technology (IMarEST) as meeting the further learning requirements, in full, for registration as a Chartered Engineer for a period of five years, from the 2012 student cohort intake.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X