• University of Leeds Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • University of York Featured Masters Courses
  • University of Glasgow Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Swansea University Featured Masters Courses
King’s College London Featured Masters Courses
Barcelona Executive Business School Featured Masters Courses
Institute for Advanced Architecture of Catalonia Featured Masters Courses
Cardiff University Featured Masters Courses
University of Kent Featured Masters Courses
"test" AND "measurement"×
0 miles

Masters Degrees (Test And Measurement)

  • "test" AND "measurement" ×
  • clear all
Showing 1 to 15 of 64
Order by 
Make future breakthroughs within healthcare with the MSc Biomedical Engineering with Healthcare Technology Management course. This course is for inquisitive students who want to design, develop, apply or even manage the use of cutting-edge methods and devices that will revolutionise healthcare. Read more
Make future breakthroughs within healthcare with the MSc Biomedical Engineering with Healthcare Technology Management course.

Who is it for?

This course is for inquisitive students who want to design, develop, apply or even manage the use of cutting-edge methods and devices that will revolutionise healthcare. It is open to science and engineering graduates and those working within hospitals or related industry who want to work in healthcare organisations, in the medical devices industry, or in biomedical engineering research.

The course will suit recent graduates and/or clinical engineers with a technical background or those working in healthcare who want to move into a management position.

Objectives

With several medical conditions requiring extensive and continuous monitoring and early and accurate diagnosis becoming increasingly desirable, technology for biomedical applications is rapidly becoming one of the key ingredients of today and tomorrow’s medical care.

From miniaturised home diagnostic instruments to therapeutic devices and to large scale hospital imaging and monitoring systems, healthcare is becoming increasingly dependent on technology. This course meets the growing need for biomedical and clinical engineers across the world by focusing on the design of medical devices from conception to application.

One of the few accredited courses of its kind in London, the programme concentrates on the use of biomedical-driven engineering design and technology in healthcare settings so you can approach this multidisciplinary topic from the biological and medical perspective; the technological design and development perspective; and from the perspective of managing the organisation and maintenance of large scale equipment and IT systems in a hospital.

This MSc in Biomedical Engineering with Healthcare Technology Management course has been created in consultation and close collaboration with clinicians, biomedical engineering researchers and medical technology industrial partners. The programme fosters close links with the NHS and internationally-renowned hospitals including St. Bartholomew's (Barts) and the Royal London Hospital and Great Ormond street so that you can gain a comprehensive insight into the applied use and the management of medical technology and apply your knowledge in real-world clinical settings.

Placements

In the last few years there have been some limited opportunities for our top students to carry out their projects through placements within hospital-based healthcare technology groups or specialist London-based biomedical technology companies. Placement-based projects are also offered to selected students in City’s leading Research Centre for Biomedical Engineering (RCBE). As we continue our cutting-edge research and industrial and clinical collaborations, you will also have this opportunity.

Academic facilities

As a student on this course you will have the opportunity to work with cutting-edge test and measurement instrumentation – oscilloscopes, function generators, analysers – as well as specialist signal generators and analysers. The equipment is predominantly provided by the world-leading test and measurement equipment manufacturer Keysight, who have partnered with City to provide branding to our electronics laboratories. You also have access to brand new teaching labs and a dedicated postgraduate teaching lab. And as part of the University of London you can also become a member of Senate House Library for free with your student ID card.

Teaching and learning

You will be taught through face-to-face lectures in small groups, where there is a lot of interaction and feedback. Laboratory sessions run alongside the lectures, giving you the opportunity to develop your problem-solving and design skills. You also learn software skills in certain modules, which are taught inside computer labs. We also arrange hospital visits so you gain hands-on experience of different clinical environments.

We arrange tutorials for setting coursework, highlight important subject areas, conduct practical demonstrations, and offer support with revision. You are assessed by written examinations at the end of each term, and coursework assignments, which are set at various times throughout the term.

You also work towards an individual project, which is assessed in the form of a written thesis and an oral examination at the end of the summer. The project can be based on any area of biomedical engineering, telemedicine or technology management and will be supervised by an academic or clinical scientist with expertise in the subject area. Many projects are based in hospital clinical engineering departments, or if you are a part-time student, you can base the project on your own workplace. You will have regular contact with the supervisor to make sure the project progresses satisfactorily. Some of the programme’s current students are working on a project focusing on devices that use brain signals to move external objects such as a remote control car and a prosthetic arm.

Some of the previous projects students have worked on include:
-A cursor controller based on electrooculography (EOG)
-Modelling a closed-loop automated anaesthesia system
-Design of a movement artefact-resistant wearable heart rate/activity monitor
-Review of progress towards a fully autonomous artificial mechanical heart
-Design of smartphone-based healthcare diagnostic devices and sensors.

If you successfully complete eight modules and the dissertation you will be awarded 180 credits and a Masters level qualification. Alternatively, if you do not complete the dissertation but have successfully completed eight modules, you will be awarded 120 credits and a postgraduate diploma. Completing four modules (60 credits) will lead to a postgraduate certificate.

Modules

Along with the 60 credit dissertation eight core modules cover diverse subject areas including biomedical electronics and instrumentation, technology infrastructure management, as well as the latest advances in medical imaging and patient monitoring.

The course includes a special module which gives you an introduction to anatomy, physiology and pathology designed for non-clinical science graduates.

The most innovative areas of biomedical and clinical engineering are covered and the content draws from our research expertise in biomedical sensors, bio-optics, medical imaging, signal processing and modelling. You will learn from academic lecturers as well as clinical scientists drawn from our collaborating institutions and departments, which include:
-Charing Cross Hospital, London
-The Royal London Hospital
-St Bartholomew's Hospital, London
-Basildon Hospital
-Department of Radiography, School of Community and Health Sciences, City, University of London

Modules
-Anatomy, Physiology and Pathology (15 credits)
-Physiological Measurement (15 credits)
-Biomedical Instrumentation (15 credits)
-Medical Electronics (15 credits)
-Cardiovascular Diagnostics and Therapy (15 credits)
-Medical Imaging Modalities (15 credits)
-Clinical Engineering Practice (15 credits)
-Healthcare Technology Management (15 credits)

Career prospects

This exciting MSc programme offers a well-rounded background and specialised knowledge for those seeking a professional career as biomedical engineers in medical technology companies or research groups but is also uniquely placed for offering skills to clinical engineers in the NHS and international healthcare organisations.

Alumnus Alex Serdaris is now working as field clinical engineer for E&E Medical and alumna Despoina Sklia is working as a technical support specialist at Royal Brompton & Harefield NHS Foundation Trust. Other Alumni are carrying out research in City’s Research Centre for Biomedical Engineering (RCBE).

Applicants may wish to apply for vacancies in the NHS, private sector or international healthcare organisations. Students are encouraged to become members of the Institute of Physics and Engineering in Medicine (IPEM) where they will be put in touch with the Clinical Engineering community and any opportunities that arise around the UK during their studies. Application to the Clinical Scientist training programme is encouraged and fully supported.

The Careers, Student Development & Outreach team provides a professional, high quality careers and information service for students and recent graduates of City, University of London, in collaboration with employers and other institutional academic and service departments. The course also prepares graduates who plan to work in biomedical engineering research and work within an academic setting.

Read less
The MERM Program is dedicated to advancing the science and practice of measurement, program evaluation, and research methodology in the social and behavioral sciences (e.g., Psychology, Education, Quality of Life Studies, Health Studies). Read more
The MERM Program is dedicated to advancing the science and practice of measurement, program evaluation, and research methodology in the social and behavioral sciences (e.g., Psychology, Education, Quality of Life Studies, Health Studies). For more than 25 years, the faculty and students of the MERM program have been contributing to its international reputation as a leader in the field. Our students and faculty have done research in human and health services, psychological, educational, community and health settings. The essential difference between the MA and MED in MERM is that the MED is wholly course based whereas the MA requires two fewer courses but the completion of a master's thesis. As such completion of a master's thesis is viewed as a prerequisite for the pursuit of doctoral studies in most institutions.

Quick Facts

- Degree: Master of Arts (research-based), Master of Education (course-based)
- Specialization: Measurement, Evaluation and Research Methodology
- Subject: Education
- Mode of delivery: On campus
- Faculty: Faculty of Education

Program Overview

The graduate program in Measurement, Evaluation, and Research Methodology (MERM) offers Ph.D., M.A., and M.Ed. degrees. The MERM area focuses on the preparation of graduate students to be methodological and measurement specialists. We strive to promote in our research, student supervision, and teaching the highest standards of measurement and research methodology in our discipline. Upon degree completion, our master's and Ph.D. students are employed as university faculty, data analysts, research scientists, test developers, directors of research in school districts or government, research consultants, assessment and testing specialists in business, industry, and education, certification and credentialing professionals, and psychometricians at research and testing organizations.

MERM students generally fit into one of three categories:
1. Students who have an applied interest in educational and psychological measurement, program evaluation, or data analysis. Although they may have some preparation in measurement and data analysis in their undergraduate studies, this is not always the case. These students are more oriented toward the use of measurement, program evaluation, or data analysis techniques in fields such as education, psychology, or health.

2. Students who have strong theoretical interests in technical problems related to areas such as test theory, item response theory, assessment, statistics, factor analysis, and multi-level modeling. Although some of these students come to the Program with some statistical and/or mathematical background, often obtained while studying in another social science discipline such as psychology or sociology, other students arrive with degrees in statistics or mathematics as well.
3. Students who find it compatible with their career goals to give equal attention to both applied and theoretical aspects of this program.

Read less
Designed in consultation with industry, the MSc Applied Instrumentation and Control gives you a structured approach to the implementation of recent developments whilst embedding the knowledge we have acquired through many years of experience. Read more
Designed in consultation with industry, the MSc Applied Instrumentation and Control gives you a structured approach to the implementation of recent developments whilst embedding the knowledge we have acquired through many years of experience.

Using case studies throughout, you build up knowledge that is instantly applicable to industry, ensuring an efficient and relevant knowledge transfer into the work place.

Accredited by the Institute of Measurement and Control.

This course has several available start dates and modes of study - please view the relevant web-page for more information:
JANUARY 2017 (Distance Learning) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00725-1DLAB-1617/Applied_Instrumentation_&_Control_(January)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

JANUARY 2018 (Full Time) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00927-1FTAB-1718/Applied_Instrumentation_and_Control?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

SEPTEMBER 2017 (Distance Learning) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00725-1DLA-1718/Applied_Instrumentation_and_Control_(Distance_Learning)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

JANUARY 2018 (Distance Learning) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00725-1DLAB-1718/Applied_Instrumentation_and_Control_(Distance_Learning)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

Programme Description

Accredited by the Institute of Measurement and Control, the MSc Applied Instrumentation and Control provides a solid foundation in measurement science and control theory, practical experience of data acquisition and instrument networking, analysis of systems for condition monitoring, fault detection and control system design.

Designed in consultation with industry, the programme provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience.

Using case studies throughout, the programme provides you with knowledge that is instantly applicable to industry, thus ensuring efficient and relevant knowledge transfer. The programme will include a project which may be industrially based.

Accreditation

The programme is accredited by the Institute of Measurement and Control (InstMC) as meeting the Engineering Council’s further learning requirements for registration as a Chartered Engineer.

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of process variables and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems.

The range of sectors includes: petrochemicals, agrochemicals, pharmaceuticals, optics and optoelectronics, medical instrumentation, power generation and the food, environmental and water industries. The employment areas within these sectors include: computer controlled instrumentation systems; process instrumentation; technical management and sales; process control and automation; sensor development and manufacture; instrument networking; instrument development; and test and measurement systems.

Read less
This course covers all the major disciplines in automation and control. It includes in-depth study of advanced control systems, industrial automation technologies, systems integration, distributed control systems and field bus protocols. Read more
This course covers all the major disciplines in automation and control. It includes in-depth study of advanced control systems, industrial automation technologies, systems integration, distributed control systems and field bus protocols.

The Automation and Control MSc equips engineering graduates with the theory and practical experience to begin a career as a design or development engineer in control and automated systems. It also develops skills in research and knowledge acquisition, which provides the foundation for further study.

You study modern and classic control systems and industrial automation technologies. The course also provides the latest information on systems integration using field buses and distributed control systems. You use industry standard test and measurement equipment and also experimental hardware and software packages relevant to the field of automation and control.

The course comprises a mixture of lectures, tutorials, coursework and practical laboratory classes. Innovative educational techniques equip you with practical design skills and research methodologies. A specialist topic of your choice is developed through an in-depth research project. You will engage with experts with world-wide reputations for high quality research in the field of Electrical Engineering and Control.

The course is delivered by the School of Electrical and Electronic Engineering. Find out from our staff and previous students about the benefits of studying Electrical and Electronic Engineering at Newcastle.

Delivery

You take modules to a total value of 180 credits over three semesters. Taught modules, worth 120 credits, take place during the first and second semesters with exams held in January and May/June. An individual project, worth 60 credits, is undertaken over semesters two and three.

Background reading and design work take place during the second semester. The majority of experimental work and preparation of your dissertation takes place during semester three.

Teaching is delivered in modern lecture theatres equipped with audio visual equipment. Blackboard, a web based Virtual Learning Environment (VLE), supports your taught modules. Practical sessions take place in small groups in world-class laboratories with extensive computing facilities.

Accreditation

The course is accredited by the Institution of Engineering and Technology (IET) and Engineering Council, and therefore provides a good foundation for professional registration.

Read less
This course delivers a broad coverage of all major disciplines in Electrical Power, including power electronics, electric drives, electrical machine design and power systems. Read more
This course delivers a broad coverage of all major disciplines in Electrical Power, including power electronics, electric drives, electrical machine design and power systems. It also covers important electrical power themes such as renewable energy systems and electric vehicles.

The Electrical Power MSc covers the following key subject areas:
-Electrical Machines
-Power Electronics
-Electric Drives
-Power System Operation
-Control of Electrical Power

A feature of the course is design of electrical systems for transportation and renewable energy applications. This is a particular specialisation of researchers in the School of Electrical and Electronic Engineering.

You will develop a knowledge of industry standard computer aided design and analysis techniques appropriate to electrical power such as the use of software packages such as MagNet, MATLAB, Simulink, PSpice and ERACS.

Throughout the course you use industry standard test and measurement equipment, experimental hardware, and software packages relevant to the field of electrical and power engineering.

The course comprises a mixture of lectures, tutorials, coursework and practical laboratory classes. You will research a specialist topic of your choice through an in-depth project. Innovative educational techniques are designed to equip you with practical design skills and research methodologies.

As a graduate of this course you are equipped with the knowledge and practical experience to embark on a career as an engineer in the field of Electrical Power. You will also have skills in research and knowledge acquisition and a solid foundation for further postgraduate studies in the field of electrical engineering and power engineering.

Delivery

You take modules to a total value of 180 credits over three semesters. Taught modules, worth 120 credits, take place during the first and second semesters with exams held in January and May/June. An individual project, worth 60 credits, is undertaken over semesters two and three.

Background reading and design work take place during the second semester. The majority of experimental work and preparation of your dissertation takes place during the semester three.

Teaching takes place in lecture theatres equipped with audio visual equipment. Blackboard, a web based Virtual Learning Environment (VLE) supports your taught modules. Practical sessions are in small groups with experts in the field of Power Electronics, Electric Drives, Machines, and Power Systems and in modern laboratory and computing facilities.

Employability

We collect information from our graduates six months after they leave University. This is part of the Destination of Leavers from Higher Education (DLHE) survey that every UK higher education institution takes part in.

Accreditation

The course is accredited by the Institution of Engineering and Technology (IET) and Engineering Council, and therefore provides a good foundation for professional registration.

Read less
This MSc covers a range of advanced topics drawn from wireless communications and communications-related signal processing, including associated enabling technologies. Read more
This MSc covers a range of advanced topics drawn from wireless communications and communications-related signal processing, including associated enabling technologies. It provides an excellent opportunity to develop the skills required for careers in some of the most dynamic fields in wireless communications.

This programme builds on the internationally recognised research strengths of the Communications Systems and Networks group within the Smart Internet Lab. This group conducts pioneering research in a number of key fundamental and experimental work areas, including spatial channel measurements and predictions, information theory, advanced wireless access (cellular and WLAN) and RF technologies. The group has well-equipped laboratories with state-of-the-art test and measurement equipment and first-class computational facilities.

The MSc provides in-depth training in design, analysis and management skills relevant to the theory and practice of the wireless communications industry. This degree is accredited by the Institute of Engineering and Technology (IET) until 2018, and is one of only a handful of accredited programmes in this field in the UK.

Programme structure

Your course will cover the following core subjects:
Semester One (60 credits)
-Coding theory
-Radio frequency engineering
-Communication systems
-Mobile communications
-Networking protocol principles
-Digital filters and spectral analysis

Semester Two (60 credits)
-Advanced mobile radio techniques
-Antennas and electromagnetic compatibility
-Broadband wireless communications
-Digital signal processing systems
-Engineering research skills
-Research project (60 credits)

You will carry out a substantial research project, starting during Semester Two and completing during the summer. This may be based at the University or with industrial partners.

Careers

This is a challenging one-year taught Master’s degree, covering all aspects of current and future wireless communication systems and associated signal processing technologies. It will prepare you for a diverse range of exciting careers - not only in the communications field, but also in other areas such as management consultancy, project management, finance and government agencies.

Our graduates have gone on to have rewarding careers in some of the leading multinational communications companies, such as Huawei, China Telecom, Toshiba, China Mobile and Intel. Some graduates follow a more research-oriented career path, with a number of students going on to study for PhDs at leading universities.

Read less
The oil and gas industries are widely affected by a growing range of factors, including shifting global economics, an evolving global energy mix and environmental issues. Read more
The oil and gas industries are widely affected by a growing range of factors, including shifting global economics, an evolving global energy mix and environmental issues.

There is an increasing demand for those working in the industries to develop an intelligent awareness of this complex business environment and to grasp the ways in which these changes will affect organisations.

Developed in conjunction with industry, the School of Engineering and Built Environment at GCU offers a suite of programmes designed to provide the knowledge required for a range of professional careers within the oil and gas industry.

The oil and gas industry instrumentation professional must be equipped to understand the principles and implementation of instrumentation, the importance of efficient and reliable measurement and control systems and have a suitably wide perspective of the subject area so that a number of different approaches to a problem can be identified. This programme addresses these requirements.

This course can also be taken in January 2018 - see the web-page for more details: http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P02555-1FTAB-1718/Applied_Instrumentation_and_Control_(Oil_&_Gas)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of processes and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems. The range of industrial sectors includes: petrochemical, agrochemical, the food industry, pharmaceutical, environmental, optics and optoelectronics, medical instrumentation, power generation and the water industry. The employment areas within these sectors include: computer controlled instrumentation systems, process instrumentation, technical management and sales, process control and automation, sensor development and manufacture, instrument working and test and measurement systems.

Assessment

The taught modules are assessed by coursework only or a combination of coursework and examination. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Read less
Surrey is one of very few institutions with the expertise and facilities to give you hands-on experience in RF and microwave devices, backed and informed by pioneering research in wireless communications, space technology, advanced gigahertz and terahertz microwave technologies. Read more
Surrey is one of very few institutions with the expertise and facilities to give you hands-on experience in RF and microwave devices, backed and informed by pioneering research in wireless communications, space technology, advanced gigahertz and terahertz microwave technologies.

This programme emphasises radio and microwave communications in 5G and beyond.

PROGRAMME OVERVIEW

This programme addresses the great shortage of skilled radio frequency (RF) and microwave engineers, and the growing demand for conceptually new wireless systems.

You will learn about a range of modern theories and techniques, accompanied by topics on wireless frequencies and sizes of RF and microwave devices.

This ranges from the lowest frequencies used in radio frequency identification (RFID) systems through to systems used at mm wave frequencies that can have applications in satellite communication systems and fifth generation wireless communication systems.

Theoretical concepts established in lectures are complemented by practical implementation in laboratory sessions, with direct experience of industry-standard computer-aided design (CAD) software.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time students must study at least two taught technical modules per academic year. It consists of eight taught modules and a project. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-RF and Microwave Fundamentals
-Nanoscience and Nanotechnology
-Antennas and Propagation
-Fundamentals of Mobile Communications
-Principles of Telecommunications and Packet Networks
-Satellite Communication Fundamentals
-RF Systems and Circuit Design
-Advanced Mobile Communication Systems
-Microwave Engineering
-Nanoelectronics and Devices
-Advanced Satellite Communication Techniques
-Standard Project

ACADEMIC SUPPORT

We provide solid academic support through the taught modules and into the project period. You will be assigned a personal tutor with whom you can discuss both academic and general issues related to the programme.

When you move into the project phase of the programme, you will be assigned a project supervisor who you will meet, usually on a weekly basis, to discuss the progress of your project.

The individual taught modules also feature strong academic support, usually through a tutorial programme. All of the RF and microwave modules have tutorial sheets to support the lectures.

Although completing the tutorials is not part of the formal assessment, you have the option of using the tutorials to receive individual feedback on your progress in the modules.

FACILITIES AND EQUIPMENT

The combined facilities of the RF teaching laboratories and the Advanced Technology Institute provide MSc students with an exceptionally wide range of modern fabrication and measurement equipment.

Furthermore a wide variety of RF test and measurement facilities are available through Surrey Space Centre and the 5G Innovation Centre, which also involve work in the RF and microwave engineering domain.

Equipment includes access to CAD design tools, anechoic chamber, spectrum analysers, network analysers, wideband channel sounder, circuit etching and circuit testing.

INDUSTRIAL AND OVERSEAS LINKS

The 5G Innovation Centre and Advanced Technology Institute within the Department have a range of active links with industry, both in the UK and overseas. During the past few years we have had students taking the MSc through the part-time route and completing their projects in industry.

Examples of industrial projects range from looking at new microwave measurement techniques at the National Physical Laboratory (NPL), to antenna design and construction at the Defence Science and Technology Laboratory (Dstl).

We have also sent students overseas to complete their projects, funded through the Erasmus scheme, which is a European programme that provides full financial support for students completing their project work at one of our partner universities in mainland Europe.

Students taking advantage of this opportunity not only enhance their CVs with a European perspective, but also produce excellent project dissertations.

PROGRAMME LEARNING OUTCOMES

The programme provides opportunities for students to develop and demonstrate knowledge and understanding, skills, qualities and other attributes in the following areas:

General transferable skills
-Be able to use computers and basic IT tools effectively
-Be able to retrieve information from written and electronic sources
-Be able to apply critical but constructive thinking to received information
-Be able to study and learn effectively
-Be able to communicate effectively in writing and by oral presentations
-Be able to present quantitative data effectively, using appropriate methods
-Be able to manage own time and resources
-Be able to develop, monitor and update a plan, in the light of changing circumstances
-Be able to reflect on own learning and performance, and plan its development/improvement, as a foundation for life-long learning

Underpinning learning
-Know and understand scientific principles necessary to underpin their education in electronic and electrical engineering, to enable appreciation of its scientific and engineering content, and to support their understanding of historical, current and future developments
-Know and understand the mathematical principles necessary to underpin their education in electronic and electrical engineering and to enable them to apply mathematical methods, tools and notations proficiently in the analysis and solution of engineering problems
-Be able to apply and integrate knowledge and understanding of other engineering disciplines to support study of electronic and electrical engineering.

Engineering problem-solving
-Understand electronic and electrical engineering principles and be able to apply them to analyse key engineering processes
-Be able to identify, classify and describe the performance of systems and components through the use of analytical methods and modelling techniques
-Be able to apply mathematical and computer-based models to solve problems in electronic and electrical engineering, and be able to assess the limitations of particular cases
-Be able to apply quantitative methods relevant to electronic and electrical engineering, in order to solve engineering problems
-Understand and be able to apply a systems approach to electronic and electrical engineering problems

Engineering tools
-Have relevant workshop and laboratory skills
-Be able to write simple computer programs, be aware of the nature of microprocessor programming, and be aware of the nature of software design
-Be able to apply computer software packages relevant to electronic and electrical engineering, in order to solve engineering problems

Technical expertise
-Know and understand the facts, concepts, conventions, principles, mathematics and applications of the range of electronic and electrical engineering topics he/she has chosen to study
-Know the characteristics of particular materials, equipment, processes or products
-Have thorough understanding of current practice and limitations, and some appreciation of likely future developments
-Be aware of developing technologies related to electronic and electrical engineering
-Have comprehensive understanding of the scientific principles of electronic engineering and related disciplines
-Have comprehensive knowledge and understanding of mathematical and computer models relevant to electronic and electrical engineering, and an appreciation of their limitations
-Know and understand, at Master's level, the facts, concepts, conventions, principles, mathematics and applications of a range of engineering topics that he/she has chosen to study
-Have extensive knowledge of a wide range of engineering materials and components
-Understand concepts from a range of areas including some from outside engineering, and be able to apply them effectively in engineering projects

Societal and environmental context
-Understand the requirement for engineering activities to promote sustainable development
-Be aware of the framework of relevant legal requirements governing engineering activities, including personnel, health, safety and risk (including environmental risk issues
-Understand the need for a high level of professional and ethical conduct in engineering

Employment context
-Know and understand the commercial and economic context of electronic and electrical engineering processes
-Understand the contexts in which engineering knowledge can be applied (e.g. operations and management, technology development, etc.)
-Be aware of the nature of intellectual property
-Understand appropriate codes of practice and industry standards
-Be aware of quality issues
-Be able to apply engineering techniques taking account of a range of commercial and industrial constraints
-Understand the basics of financial accounting procedures relevant to engineering project work
-Be able to make general evaluations of commercial risks through some understanding of the basis of such risks
-Be aware of the framework of relevant legal requirements governing engineering activities, including personnel, health, safety and risk (including environmental risk) issues

Research and development
-Understand the use of technical literature and other information sources
-Be aware of the need, in appropriate cases, for experimentation during scientific investigations and during engineering development
-Be able to use fundamental knowledge to investigate new and emerging technologies
-Be able to extract data pertinent to an unfamiliar problem, and employ this data in solving the problem, using computer-based engineering tools when appropriate
-Be able to work with technical uncertainty

Design
-Understand the nature of the engineering design process
-Investigate and define a problem and identify constraints, including environmental and sustainability limitations, and health and safety and risk assessment issues
-Understand customer and user needs and the importance of considerations such as aesthetics
-Identify and manage cost drivers
-Use creativity to establish innovative solutions
-Ensure fitness for purpose and all aspects of the problem including production, operation, maintenance and disposal
-Manage the design process and evaluate outcomes
-Have wide knowledge and comprehensive understanding of design processes and methodologies and be able to apply and adapt them in unfamiliar situations
-Be able to generate an innovative design for products, systems, components or processes, to fulfil new needs

Project management
-Be able to work as a member of a team
-Be able to exercise leadership in a team
-Be able to work in a multidisciplinary environment
-Know about management techniques that may be used to achieve engineering objectives within the commercial and economic context of engineering processes
-Have extensive knowledge and understanding of management and business practices, and their limitations, and how these may be applied appropriately

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
Designed in consultation with industry, MSc Applied Instrumentation and Control provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience. Read more
Designed in consultation with industry, MSc Applied Instrumentation and Control provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience. Using case studies throughout, the programme provides you with knowledge that is instantly applicable to industry, thus ensuring efficient and relevant knowledge transfer.

Accredited by the Institute of Measurement and Control.

Programme Description

Accredited by the Institute of Measurement and Control, the MSc Applied Instrumentation and Control provides a solid foundation in measurement science and control theory, practical experience of data acquisition and instrument networking, analysis of systems for condition monitoring, fault detection and control system design.

Designed in consultation with industry, the programme provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience.

Using case studies throughout, the programme provides you with knowledge that is instantly applicable to industry, thus ensuring efficient and relevant knowledge transfer. The programme will include a project which may be industrially based.

Accreditation

The programme is accredited by the Institute of Measurement and Control (InstMC) as meeting the Engineering Council’s further learning requirements for registration as a Chartered Engineer.

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of process variables and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems.

The range of sectors includes: petrochemicals, agrochemicals, pharmaceuticals, optics and optoelectronics, medical instrumentation, power generation and the food, environmental and water industries. The employment areas within these sectors include: computer controlled instrumentation systems; process instrumentation; technical management and sales; process control and automation; sensor development and manufacture; instrument networking; instrument development; and test and measurement systems.

Read less
The oil and gas industry instrumentation professional must be equipped to understand the principles and implementation of instrumentation, the importance of efficient and reliable measurement and control systems and have a suitably wide perspective of the subject area so that a number of different approaches to a problem can be identified. Read more
The oil and gas industry instrumentation professional must be equipped to understand the principles and implementation of instrumentation, the importance of efficient and reliable measurement and control systems and have a suitably wide perspective of the subject area so that a number of different approaches to a problem can be identified. This programme addresses these requirements.

The MSc Applied Instrumentation and Control (Oil & Gas) is available to study full-time beginning in September and January.

Programme Description

The oil and gas industries are widely affected by a growing range of factors, including shifting global economics, an evolving global energy mix and environmental issues.

There is an increasing demand for those working in the industries to develop an intelligent awareness of this complex business environment and to grasp the ways in which these changes will affect organisations.

Developed in conjunction with industry, the School of Engineering and Built Environment at GCU offers a suite of programmes designed to provide the knowledge required for a range of professional careers within the oil and gas industry.

The oil and gas industry instrumentation professionalmust be equipped to understand the principles andimplementation of instrumentation, the importanceof efficient and reliable measurement and controlsystems and have a suitably wide perspective of thesubject area so that a number of different approachesto a problem can be identified. This programmeaddresses these requirements.

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of processes and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems. The range of industrial sectors includes: petrochemical, agrochemical, the food industry, pharmaceutical, environmental, optics and optoelectronics, medical instrumentation, power generation and the water industry. The employment areas within these sectors include: computer controlled instrumentation systems, process instrumentation, technical management and sales, process control and automation, sensor development and manufacture, instrument working and test and measurement systems.

Assessment

The taught modules are assessed by coursework only or a combination of coursework and examination. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Read less
Humber’s Wireless Telecommunications graduate certificate program prepares you with electronics, computer engineering, physics and telecommunications skills for work on the cutting-edge technologies in the wireless telecommunications industry. Read more
Humber’s Wireless Telecommunications graduate certificate program prepares you with electronics, computer engineering, physics and telecommunications skills for work on the cutting-edge technologies in the wireless telecommunications industry.

Students will become familiar with the infrastructure of communications systems and how to be successful in the communications industry. This wireless program focuses on three main outcomes: RF/optical test and measurement, networking, and troubleshooting a number of wireless telecommunications systems.You will learn to use engineering tools and equipment for testing of systems including LTE/UMTS/GSM drive test tools, spectrum analyzers, network analyzers, optical time domain reflectometers. You will also learn how to troubleshoot and configure local- and wide-area networks (LAN/WANs) at the device and at the protocol levels. Our courses cover additional networking topics relevant to telecom carriers such as MPLS, VPNs, QoS and VoIP. You will be prepared to understand the technology roadmap leading into Internet of Things (IoT), 5G and data center virtualization technologies.

This program is an established program with industry with over two decades of expertise. Students will have access to learn on some of the best equipment available. Curriculum is kept current with the collaboration of our industry partners in the wireless field. Students utilize the latest technologies in small classes taught by experienced faculty and industry leaders.

Course detail

Upon successful completion of the program, a graduate will:

• Analyze, test, measure and troubleshoot RF (radio frequency) signals, attenuation and antenna systems, and test and troubleshoot linear and non-linear circuit modules.
• Manage network performance issues and problems against user needs through the design, implementation, testing, and troubleshooting of a variety of current and relevant protocols.
• Build wired and/or wireless networks using design documentation, and measure the performance of both the wired and wireless networks’ components and the networks’ applications using basic and advanced network management tools and applications.
• Design, install and configure networks - implementing various network configurations using different standard protocols, and upgrade network hardware (e.g. workstations, servers, wireless access points, routers, switches, firewalls etc.) and related components and software according to the best practices in the industry.
• Monitor and evaluate network security issues and perform basic security audits on both wired and wireless networks.
• Utilize change control, issue documentation and problem escalation procedures and processes, generate and maintain “as-built” network documentation following industry best practices.
• Apply RF analog and digital circuit analysis and design concepts to analyze voice and data communication using different modulation techniques.
• Use simulation tools to mathematically model and solve RF (radio frequency) electrical and electronics networks which are essential components of telecommunications and wireless technologies.
• Install, or use existing, operating systems & its components and manage users, processes, memory management, peripheral devices, telecommunication, networking and security, and troubleshoot hardware and software components of computer and operating systems using system level commands and scripts.
• Assist in the design and development of a wide area of networks using a variety of network layer-one, layer-two and layer-three protocols, microwave communication links, and fiber optics links.
• Describe the infrastructures, components, and protocols of a wide range of wireless technologies.
• Develop the infrastructure required for VoIP transport through IP networks, and be able to configure VoIP clients such as IP telephones and soft phones.

Modules

Semester 1
• WLS 5000: Applied Electromagnetics
• WLS 5002: RF Technology
• WLS 5003: Telecommunication Systems
• WLS 5004: Data Networks
• WLS 5500: Microwave and Fibre Optics

Semester 2
• WLS 5501: Broadband Communications and Security
• WLS 5503: Mobile Technologies
• WLS 5505: Wireless Data Networks
• WLS 5506: LTE Core
• WLS 5507: Wireless Project and ITIL

Your Career

The Canadian wireless industry supports over 280,000 jobs with sector salary average more than Canada’s average salary. In addition, the international wireless telecommunications market is growing. There are numerous employment opportunities in the planning, developing, manufacturing, co-ordinating, implementing, maintaining and managing of telecommunications systems for businesses and government.

As the rate of technology adoption increases in Canadian industry, the Wireless Telecommunications program is preparing graduates for these new markets. A 2015-2019 labour market report by the Information and Communications Technology Council (ICTC) indicates that by 2019, over 182,000 critical ICT positions will be left unfilled.

Graduates of the program work at cell phone service providers, equipment manufacturers, in house information technology (IT) departments, sales departments, and specialized telecommunication and networking companies.

How to apply

Click here to apply: http://humber.ca/admissions/how-apply.html

Funding

For information on funding, please use the following link: http://humber.ca/admissions/financial-aid.html

Read less
Fascinated by the science of sound? Southampton Solent University’s applied acoustics masters programme can provide you with the skills and knowledge required to work in a range of acoustics fields. Read more

Overview

Fascinated by the science of sound? Southampton Solent University’s applied acoustics masters programme can provide you with the skills and knowledge required to work in a range of acoustics fields. Suitable graduate destinations include consultancy, engineering, environmental health, built environment work or further study at PhD level.

Taught by experts with experience in both research and industry, you can get hands-on experience and learn to use the latest measurement, simulation and modelling technology. You will also study important acoustics principles including how humans respond to sound, acoustic physics, and how sound interacts with our environment.

- Students learn from industry experts with strong backgrounds in industry, research and consultancy roles.
- Southampton Solent’s on-campus acoustics consultancy provides students with the opportunity to work with real clients.
- The curriculum is informed by industry partners and Solent’s strong track record of acoustics research.
- Solent has a 10-year history of successful graduate employment in the acoustic industries.
- Students are given the opportunity to tailor the programme to their own career ambitions by picking from a range of optional units.
- Students have free access to the latest industry-standard technology including a state-of-the-art 3D digital Cinema with Dolby Atmos; a Hemi-anechoic chamber; CadnaA, EASE and CATT software; and a wide variety of lab and field test equipment.

The industry -

Acoustics offers an intellectual and practical challenge across a wide range of sectors - from manufacturing or construction to architecture, telecommunications and engineering.

Acousticians could be involved in designing and planning exciting new infrastructure projects such as airports, motorways and sports arenas; could be responsible for making aeroplanes and cars quieter; or could work on improving the sound quality of consumer electronics. Acousticians are also involved in the design of new buildings – from flats and houses through to skyscrapers and concert halls.

The programme -

Taught by experts with strong research and industry backgrounds, MSc Applied Acoustics offers students the chance to gain hands-on experience with the latest measurement, simulation and modelling technology. Students also study relevant scientific principles such as how humans respond to sound, acoustic physics, and how sound interacts with our environment.

We have excellent links with the Institute of Acoustics (IoA) and the Association of Noise Consultants, as well as a number of commercial companies across the sector. These include KP Acoustics, with whom we have a formal partnership for work placement and mentoring. The course has also been designed to meet the requirements for professional IoA registration.

To aid study and help perfect techniques, students have full access to the University’s laboratory and studio facilities. Students will be able to undertake acoustic measurement and laboratory projects using a wide range of test equipment such as sound level meters, a 16-channel data acquisition system, head and torso simulators, a laser vibrometer and ambisonic microphones. Students will also have access to cutting-edge simulation and modelling software, including MATLAB, NI Labview, CadnaA, CATT Acoustic, and EASE.

The University also offers access to specialist facilities for the testing and demonstration of acoustic and electro-acoustic principles, including a hemi-anechoic chamber, audio isolation booths for sound recording and audiometric testing, and the University’s own digital 3D cinema.

Thanks to the course team’s strong industry connections, students have access to guest speakers from a range of relevant organisations. Previous speakers have included Mark Murphy and Jim Griffiths (Vanguardia Consulting), Nicholas Jones (Hilson Moran) and Phil McIlwain (Westminster City Council).

Course Content

Programme specification document - http://mycourse.solent.ac.uk/course/view.php?id=6152

Teaching, learning and assessment -
The course is taught through classroom seminars/lectures, laboratory sessions and independent learning, as well as your supervised research project. While some laboratory sessions entail working in a group, all assessment is individual.

Partial credit can be awarded to holders of the Institute of Acoustics diploma in acoustics and noise control against equivalent taught modules of the MSc. Please contact the course team for further information.

Work experience -

There are a number of opportunities for work experience with professional partners and contacts, as well as through the University’s own Solent Acoustics consultancy.

Past students have worked on a range of projects, including for Truck Festival, Isle of Wight Festival, Westminster City Council and KP Acoustics.

Additionally, the Professional Skills and Practice unit involves organising your own work placement with an external company, supported by staff and making use of the course team’s industry contacts.

Assessment -

The course is assessed through a mixture of coursework, projects, presentations and practical and written examinations.

Our facilities -

On the master’s course you will have access to a wide range of specialist equipment and facilities, including:

- Hemi-anechoic chamber with 16-channel National Instruments data acquisition system.
- NTi Flexus electroacoustic analysis system with turntable.
- Wide range of Class 1 and 2 Sound level meters.
- Cirrus Research Dosebadge workplace noise assessment kits.
- Building acoustics systems including conical and dodecahedral loudspeakers and tapping machine.
- B&K Head and Torso Simulators (HATS).
- Environmental noise measurement kits.
- Polytec Laser Vibrometer.
- Larson Davis Hand Arm vibration measurement system.
- Siemens Unity and Amplivox audiometers and Larson Davis Audiometer calibration system.
- Computer suites with EASE, CATT and CadnaA acoustic modelling software.

Web-based learning -

Solent’s virtual learning environment provides quick online access to assignments, lecture notes, suggested reading, discussion forums and other course information.

You will also receive a subscription to the online video tutorial resource Lynda.com, to help learn extra professional skills.

The Professional Skills and Practice optional module is a distance/online module, supported through the virtual learning environment.

Why Solent?

What do we offer?

From a vibrant city centre campus to our first class facilities, this is where you can find out why you should choose Solent.

Facilities - http://www.solent.ac.uk/about/facilities/facilities.aspx

City living - http://www.solent.ac.uk/studying/southampton/living-in-southampton.aspx

Accommodation - http://www.solent.ac.uk/studying/accommodation/accommodation.aspx

Career Potential

Acoustics offers an intellectual and practical challenge across a wide range of sectors, from manufacturing or construction to architecture, telecommunications or various engineering industries.

Acousticians could be involved in designing and planning exciting new infrastructure projects such as airports, motorways and sports arenas, or could be responsible for making airplanes and cars quieter, or improving the sound quality of a television or computer.

Acousticians are also involved in the design of new buildings – from flats and houses through to skyscrapers and concert halls.

Career destinations -

Examples of career destinations include:

- acoustic engineer
- audio system designer
- recording studio and concert hall designer
- environmental health officer
- environmental consultant
- audio engineer
- health and safety officer
- building control officer.

Links with industry -

We have excellent links with the Institute of Acoustics and the Association of Noise Consultants, as well as a number of companies across the sector, including KP Acoustics (with whom we have a formal partnership for work placement and mentoring).

Guest speakers from a range of different organisations regularly present seminars and workshops, which have recently included Mark Murphy and Jim Griffiths (Vangardia Consulting), Nicholas Jones (Hilson Moran) and Phil McIlwain (Westminster City Council).

The University also hosts regular industry events and conferences to which students are invited.

Transferable skills -

The MSc in Applied Acoustics offers students a wide variety of transferable skills, such as using software to analyse and present complex data, use of Geographical Information Systems (GIS) and architectural CAD modelling, problem solving, mathematics, project management and research skills.

Further study -

If you are particularly interested in research, the course offers opportunities to continue on to PhD study.

You will also have the chance to gain additional qualifications while you study, such as the Institute of Acoustics (IoA)’s certificates of competence in building acoustics measurement or environmental noise measurement, at significantly reduced cost.

There is also the opportunity to register to take the assessment for the IoA Diploma in Acoustics and Noise Control while taking the MSc (registration fee applies).

Examples of employment obtained by recent graduates -

Solent graduates have gone on to work in acoustics roles for Apple (acoustic engineer), Accon UK, Samsung (audio engineer), Cole Jarman Associates, Hilson Moran, Mott Macdonald, KP Acoustics, Hann Tucker Associates, Hoare Lea, Vangardia Consulting and Clarke Saunders Associates, among others.

Next steps

Looking to hone your knowledge of acoustics while boosting your employability? With top-of-the-line facilities, an experienced teaching team and a history of delivering world-class acoustics tuition, Southampton Solent University’s MSc Applied Acoustics will help equip you with the skills you need to thrive in a range of exciting careers.

Read less
The optoelectronics market is expected to grow significantly in coming years. This specialist optoelectronics Masters course will give you access to optoelectronics expertise, so you can take advantage of new opportunities in this field. Read more
The optoelectronics market is expected to grow significantly in coming years. This specialist optoelectronics Masters course will give you access to optoelectronics expertise, so you can take advantage of new opportunities in this field.

Optoelectronics includes electronic devices that source, detect and control light. On this course you will benefit from high-level vocational training in lasers, LED lighting and semiconductors, tailored to the needs of the optoelectronics and optical communications industries.

As part of your studies, you will also benefit from the latest research within the field. You will be able to attend relevant research seminars and departmental seminars that are held regularly throughout the year. These events reflect the most up-to-date thinking from academics and specialists from industry.

The teaching team, many of whom have published research in optoelectronics, lead the University’s Wireless and Optoelectronics Research and Innovation Centre This informs our teaching, so you will benefit from cutting-edge Course Content that embodies the latest research.

Routes of study:
The course is available to study via two routes:
- MSc Optoelectronics (with internship)
- MSc Optoelectronics (without internship)

Please note: *Internships are optional and available to full-time students only. Internship places are limited. Students have the opportunity to work in a participating UK company or within a Research Centre at the University. You can also opt to study the course without an internship which will reduce your course length.

What you will study

You will study the following modules:
- Physics in Modern Optics
- Optoelectronics Devices for Telecommunications
- Optoelectronics Devices for Life Science & Measurement
- Applied Digital Signal Processing
- Embedded System Design
- Product Innovation and Entrepreneurship
- Six month Internship
- Masters Major Individual Project

Learning and teaching methods

The optoelectronics course offers an intensive but flexible learning pattern, with two start points each year – February and September. There are three major blocks during the 18 months’ study (full-time), which includes 12 months of teaching and a possible six months of internship*. Throughout your studies you will complete a 15-week final research project.

You will be taught through lectures, tutorials and workshops involving hands-on systems modeling and simulations using state-of-the-art hardware and software facilities (Zemax, Lightools etc). Students will also engage in supervised research supported by full access to world-class online and library facilities.

You are also expected to regularly attend relevant research seminars and departmental colloquia, which reflect the up-to-date research interests of the Wireless and Optoelectronics Research and Innovation Centre (WORIC).

The optoelectronics course is available to study via two main routes, you can opt to add further value to your studies by undertaking an internship or simply focus on building your academic knowledge through a on-campus study as detailed below:

- MSc Optoelectronics (with internship):
Delivery: Full-time only | Start dates: September and February

If you choose to undertake an internship, your course will be delivered in four major blocks that offer an intensive but flexible learning pattern. Six taught modules are completed during two teaching blocks featuring 12 contact hours per week. This is followed by 6 month period of internship, after which the student returns to undertake a 16-week major research project. Please note: Course length may vary dependent on your chosen start date.

- MSc Optoelectronics (without internship):
Delivery: Full-time and Part-time | Start dates: September and February

The study pathway available without internship is available full-time and part-time. The full-time route is delivered in three major blocks. Six taught modules are completed during two teaching blocks featuring 12 contact hours per week followed by a 16-week major research project. The full-time course duration is about 12 months, if you study part-time then you will complete the course in three years. Part-time study involves completing three modules in each of the first two years and a major research project in the final year. The use of block-mode delivery in this way allows flexible entry and exit, and also enables practising engineers to attend a single module as a short course.

Work Experience and Employment Prospects

Many industries need specialists in optoelectronics systems design. Careers are available in industrial and technology sectors such as automotives, computers, consumer electronics, communications, industrial optical sensing equipment and medical laser equipment.

The major project gives you a great opportunity to deepen your knowledge and hone your skills in a specialist topic informed by your planned career, and the period of internship gives you an industrial experience that can set you apart from others immediately upon graduation.

Internship

Internships are only available to students studying full-time: Following successful completion of six taught modules, you will be competitively selected to join participating UK companies or University Research Centres on a six-month period of unpaid work placement before returning to undertake your major research project. All students who have an offer for the MSc Optoelectronics (with internship) are guaranteed an internship either in industry or in a University Research Centre.

There are 25 internship places available. Students who wish to undertake an internship must apply for the MSc Optoelectronics (with internship). It is anticipated that there will be significant demand for this programme and applicants are advised to apply as soon as possible to avoid disappointment. Applications will be considered on a first come first served basis and the numbers of students offered a place on the programme with internship will be capped.

If the course is already full and we are unable to offer you a place on the Masters course with internship, we may be able to consider you for the standard MSc Optoelectronics (without internship) which is a shorter programme.

Assessment methods

Each of the six taught modules is typically assessed through 50% coursework and 50% closed-book class test. The major project is assessed through presentation to a panel of examiners, viva and written report. Work for lecture modules is assessed largely through examinations whereas the laboratory work is assessed in a continuous manner. Lecture courses are examined at the end of each teaching block.

Facilities

There are two optoelectronics and two RF laboratories equipped with £1million worth of experimental equipments and modeling facilities. These state-of-the-art facilities are home to:

The Innova® Sabre® MotoFreD™ ion laser
Newfocus TLM-8700 fast sweep tunable laser source
Agilent 8164B Lightwave Measurement System
RENISHAW ML-10 Measurement Systems
Beam profilers: Thorlabs BC106-VIS – CCD Camera Beam Profiler, Thorlabs BP109-IR – Beam Profiler
Scanning Fabry-Perot Spectrum Analyzer. e.g. Thorlabs SA200-5B, Coherence 0464H08
Anritsu MS9710B Optical Spectrum Analyzer
Ocean Optics spectrometers. e.g. HR4000 and USB4000
Edwards E306A Coating System Thermal Vacuum Evaporator
SCS G3-8 Spin Coater
ZEPTO laboratory plasma cleaner ZEPTO
FUJIKURA FSM-40S ARC FUSION SPLICER
National Instruments FPGA and Digitizer
Signal generator: TG210 2MhZ function Generator
Oscilloscopes: HP infinium Oscilloscope, HM507 Combiscope
Anechoic Chamber suitable for frequencies above 1 GHz.
Various measurement systems for 2, 10, 20, 40, & 60 GHz links
VubiQ 60 GHz development kits
Three 60 GHz Backhaul links (Sub10 Systems)
Antenna radiation patterns measurement system
Two equipped vans for outdoor measurements
Programmable or Reconfigurable Platform (DSPs, FPGAs, GPPs)
The modeling facilities include high performance computing facilities (e.g. a 24-core cluster) equipped with various optoelectronic and EM modeling packages such as FDTD solutions, Zemax, FEKO, and VPI Photonics suites. We also in-house novel RF Ray-tracing and Physical Optics EM planning tools developed by members of WORIC.

Teaching

The academic staff teaching on the MSc Optoelectronics are the same people who lead and work in the WORIC. This international centre has a significant track record of innovation in lasers, sensors, nanophotonics, wireless communications, telecommunications, and optical communications and aims to provide industry with access to cutting edge innovative ideas and knowledge. WORIC has won many grants from EPSRC, TSB, EADS, as well as A4B is keen to solve real industrial problems with innovation that provides enormous market.

Read less
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance. Read more
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance.

Course details

The programme of lectures and project work, encompasses a wide range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The course is applied in nature and has been designed so that on completion, you are technically well prepared for a career in industry.

Professional accreditation

Our MSc Petroleum Engineering is accredited by the Energy Institute, under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC.

By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification, and the earning potential of chartered petroleum engineers can exceed £100,000 a year.

Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase the industrial networking opportunities for students.

What you study

For the Postgraduate Diploma (PgDip) award you must successfully complete 120 credits of taught modules. For an MSc award you must successfully complete 120 credits of taught modules and a 60-credit master's research project.

You select your master’s research projects from titles suggested by either industry or our academic staff, but you may also, with your supervisor’s agreement, suggest your own titles.

Core modules
-Drill Engineering and Well Completion
-Hydrocarbon Production Engineering
-Material Balance and Recovery Mechanisms
-Petroleum Chemistry
-Petroleum Economics and Simulation
-Petroleum Reservoir Engineering
-Practical Health and Safety Skills
-Research and Study Skills

MSc candidates
-Research Project

Modules offered may vary.

Teaching

The course is delivered using a series of lectures, tutorials and laboratory sessions.

Our MSc Petroleum Engineering is supported by excellent laboratory and engineering machine workshop facilities including fluid flow measurement, computer modelling laboratories, other laboratories and workshops, an excellent library and computing facilities. We have invested around £150,000 in laboratory equipment particularly in within core analysis and enhanced oil recovery.

We have several computer laboratories equipped with specialised and general-purpose software. This generous computing provision gives you extended access to industry-standard software – it allows you to develop skills and techniques using important applications. For upstream processes, Teesside University has access to educational software packages like Petrel, Eclipse, CMG, PIPESIM and Ecrin to simulate the behaviour of oil reservoirs, calculating oil in situ, and oil and gas production optimisation. As for downstream processes, you can use HYSYS to test different scenarios to optimise plant designs.

Facilities include:
Enhanced oil recovery and core analysis laboratory
The flow through porous media, enhanced oil recovery techniques and core analysis is done in the core flooding lab. The lab is equipped with core plugging and trimming, core preparation and conventional core properties measurement equipment. At a higher level, the lab is also equipped to perform some special core analysis measurements such as fluid relative permeabilities as well as rock surface wetting quantification.

Petrophysics laboratory
The petrophysics lab allows you to study the properties of rocks, particularly the measurement of porosity and evaluation of permeability. The lab is equipped with sieve analysis equipment to investigate grain sorting and its effect on permeability and the porosity of rocks. You are able to gauge saturation and fluid flow through porous media.

Surface characterisation laboratory
The rock surface characterisation lab is equipped with a zeta analyser to measure the rock surface electric charge. You study the rock surface wetting state, adsorption and desorption potential using digitised contact angle apparatus and thermos-gravimetric apparatus respectively.

Drilling laboratory
The drilling lab is equipped with mud measurement equipment including mud density, mud rheology and mud filtration systems to enable you to measure mud cake and formation damage. The lab highlights the importance of oilfield drilling fluids.

Assessment varies from module to module. The assessment methodology could include in-course assignments, design exercises, technical reports, presentations or formal examinations. For your MSc project you prepare a dissertation.

Employability

These courses provide specialist education tailored to the requirements of both the upstream and downstream petroleum industry. The relevance of this education combined with careful selection of candidates has encouraged oil and gas companies to target our graduates for recruitment over the years.

The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy, with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists.

It is widely recognised that a steady influx of fresh people and ideas is vital for the longer-term success and stability of an organisation, and it is therefore expected that recruitment will continue, especially for those with motivation and the appropriate qualifications.

Read less
This course recognises the need for skilled graduates to address the world’s major issues in electrical energy and power systems. Read more

Why this course?

This course recognises the need for skilled graduates to address the world’s major issues in electrical energy and power systems. It offers an integrated programme focusing on:
- the design, operation and analysis of power supply systems
- power plant
- renewables and industrial electrical equipment relating to a liberalised power supply industry
- globalised markets and environmental drivers

The course provides the advanced level of knowledge and understanding required for challenging, well paid and exciting careers in the dynamic and high growth electrical power and renewable energy sectors.

See the website https://www.strath.ac.uk/courses/postgraduatetaught/electricalpowerengineeringwithbusiness/

You’ll study

There’s two semesters of compulsory and optional classes, followed by a three-month summer research project in your chosen area. There’s the opportunity to carry this out through the department's competitive MSc industrial internships.

The internships are offered in collaboration with selected department industry partners, including ScottishPower, Smarter Grid Solutions and SSE. You'll address real-world engineering challenges facing the partner, with site visits, access and provision of relevant technical data and/or facilities provided, along with an industry mentor and academic supervisor.

Facilities

You'll have exclusive access to our extensive computing network and purpose built teaching spaces, including our outdoor test facility for photovoltaics high voltage laboratory, equipped with the latest technologies, including:
- LDS 6-digital partial discharge test & measurement system
- Marx impulse generators & GIS test rigs
- £1M distribution network and protection laboratory comprising a 100kVA microgrid, induction machines and programme load banks

You'll have access to the UK’s only high-fidelity control room simulation suite and the Power Networks Demonstration Centre (PNDC). This is Europe’s first centre dedicated to the development and demonstration of “smart-grid” technologies.

Accreditation

The course is fully accredited by the professional body, the Institution of Engineering and Technology (IET).

Pre-Masters preparation course

The Pre-Masters Programme is a preparation course for international students (non EU/UK) who do not meet the entry requirements for a Masters degree at University of Strathclyde. The Pre-Masters programme provides progression to a number of degree options.
To find out more about the courses and opportunities on offer visit isc.strath.ac.uk or call today on +44 (0) 1273 339333 and discuss your education future. You can also complete the online application form. To ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers today.

Learning & teaching

We use a blend of teaching and learning methods including interactive lectures, problem-solving tutorials and practical project-based laboratories. Our technical and experimental officers are available to support and guide you on individual subject material.
Each module comprises of approximately five hours of direct teaching per week. To enhance your understanding of the technical and theoretical topics covered in these, you're expected to undertake a further five to six hours of self-study, using our web-based virtual learning environment (MyPlace), research journals and library facilities.
The teaching and learning methods used ensure you'll develop not only technical engineering expertise but also communications, project management and leadership skills.
You'll undertake group projects. These will help to develop your interpersonal, communication and transferable skills essential to a career in industry.

- Industry engagement
Interaction with industry is provided through our internships, teaching seminars and networking events. The department delivers monthly seminars to support students’ learning and career development. Iberdrola, National Grid, ScottishPower, SSE, Siemens and Rolls-Royce are just a few examples of the industry partners you can engage with during your course.

Assessment

A variety of assessment techniques are used throughout the course. You'll complete at least six modules. Each module has a combination of written assignments, individual and group reports, oral presentations, practical lab work and, where appropriate, an end-of-term exam.

Assessment of the summer research project/internship consists of four elements, with individual criteria:
1. Interim report (10%, 1500 to 3000 words) – The purpose of this report is to provide a mechanism for supervisors to provide valuable feedback on the project’s objectives and direction.

2. Poster Presentation (15%) – A vital skill of an engineer is the ability to describe their work to others and respond to requests for information. The poster presentation is designed to give you an opportunity to practise that.

3. Final report (55%) – This assesses the communication of project objectives and context, accuracy and relevant of background material, description of practical work and results, depth and soundness of discussion and conclusions, level of engineering achievement and the quality of the report’s presentation.

4. Conduct (20%) - Independent study, project and time management are key features of university learning. The level of your initiative & independent thinking and technical understanding are assessed through project meetings with your supervisor and your written logbooks.

Careers

The course provides the advanced level of knowledge and understanding required for challenging, well paid and exciting careers in the dynamic and high growth electrical power and renewable energy sectors.
Employment prospects are excellent, with recent graduates operating in power engineering consultancy, global power utilities (generation, supply and distribution), the renewable energy sector and manufacturing. They've taken up professional and technical positions as electrical engineers, power systems specialists, distribution engineer and asset managers in large energy utilities such as ScottishPower Energy Networks, Aker Solutions, National Grid & EDF Energy. Graduates have also taken up roles in project management and engineering consultancy with companies such as Arup, Atkins Global, Ramboll, Moot MacDonald and AMEC.

How much will I earn?

Salaries for electrical engineers start at around £20,000 to £25,000. Experienced or incorporated engineers can earn between £28,000 and £40,000. A chartered electrical engineer can earn higher salaries of £40,000 to £55,000 or more.*

*information is intended only as a guide. Figures taken from Prospects.

Find information on Scholarships here http://www.strath.ac.uk/engineering/electronicelectricalengineering/ourscholarships/.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X