• University of Derby Online Learning Featured Masters Courses
  • New College of the Humanities Featured Masters Courses
  • Coventry University Featured Masters Courses
  • St Mary’s University, Twickenham Featured Masters Courses
  • University of Glasgow Featured Masters Courses
  • Cardiff University Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Goldsmiths, University of London Featured Masters Courses
University of the West of England, Bristol Featured Masters Courses
Ulster University Featured Masters Courses
University of Hertfordshire Featured Masters Courses
Institute for Advanced Architecture of Catalonia Featured Masters Courses
Bath Spa University Featured Masters Courses
"surface"×
0 miles

Masters Degrees (Surface)

  • "surface" ×
  • clear all
Showing 1 to 15 of 184
Order by 
The MA Surface Pattern Design course offers a unique MA experience in Wales, with its distinctly design driven flavour, tailored to address live briefs; shaping students to pursue employment; launch themselves as freelancers or establish enterprises. Read more
The MA Surface Pattern Design course offers a unique MA experience in Wales, with its distinctly design driven flavour, tailored to address live briefs; shaping students to pursue employment; launch themselves as freelancers or establish enterprises.

The MA is practice based, fast paced and built on the long established success and ethos of our BA Honours Surface Pattern Design programme.

Course Overview

The Contemporary Dialogues portfolio offers an exciting and innovative re-thinking of Postgraduate provision that reflects the strategic thinking of Swansea College of Art. The portfolio facilitates migration between diverse thematic disciplines, exploring new ideas and conceptual approaches to allow young artists and designers to confront the issues that face society today and into the future.

The portfolio’s ethos of collaborative dialogues through material practices provides an innovative model of design, fine and applied arts education. This development allows students from all pathways to experience and share creative practices and innovative mind-sets through inter-disciplinary and trans-disciplinary dialogues. This ethos is enhanced within each programme to stimulate ‘collaborative’ practices and experimentation across a broader spectrum of specialist fields, developing graduates with the contextual awareness, creative thinking and technical skills to operate at the forefront of their discipline.

During the course of your studies you will be supported by specialist staff, leading professionals and practicing artists through lectures, seminars, workshops and tutorials. We have exceptional traditional and digital facilities, housed in spacious purpose-build workshops. Through these, we encourage creative freedom within all of our students and support you in challenging conventional thinking and established practices and facilitate new technological advances across a broad range of disciplines. We have found that through collaborative experimentation and innovative design thinking our students are able to produce work that meets the challenges and respond to the demands of the 21st century.

Facilities include:
-Firing kilns for glass and ceramics
-Printmaking, Screen Printing and Digital Textile Technologies
-Traditional and Digital Stitch
-Wood, Metal, Clay
-Cutting Etching and Engraving Technologies - Waterjet, Laser, Plotter
-3D Printing and CNC
-Chemical and Digital Darkrooms
-Specialist computer facilities with commercial standard software

Modules

Core Modules
-Collaborative Dialogues (20 credits)
-Co-Existent Perspectives (20 credits)
-The Thought Experiment (20 credits)
-Explorative Research Praxis (60 credits)
-Confirmative Praxis (60 credits)

Key Features

MA Surface Pattern Design will provide a design-focused and student-led experience with its main aims to enhance creativity, innovation, design, making skills, advance contextual understanding and employability.

The multi-disciplinary programme will appeal to recent graduates of our own undergraduate programme and graduates of similar courses; to those wishing to change careers within the creative industries or to those wishing to revisit academia and the subject area.

Students will have a designated studio space and access to the existing Surface Pattern workshops and specialist facilities.

Students will benefit from a strong practice based grounding in the key areas of traditional and digital surface pattern design before exploring the wider possibilities that the MA portfolio will offer to advance their practice.

Assessment

The main modes of assessment used on this programme are; studio projects, written assignments and seminar presentations.

Assessment at postgraduate level is reflected by your ability to reformulate and use relevant methodologies and approaches to address problematic situations that involve many interacting factors. It includes taking responsibility for planning and developing courses of action that initiate or underpin substantial change or development, as well as exercising broad autonomy and judgement. It should also reflect an understanding of the relevant theoretical and methodological perspectives and how they affect your area of study or work.

Career Opportunities

We strive to ensure a sustainable future in Surface Pattern for our graduates through a rigorous programme underpinned by skills in employability, creative enterprise and professional studies.

There are opportunities to undertake work placements and address live briefs. Most recently our students have completed briefs with M&S, Tigerprint, Hallmark and Freshwest design companies.

Students are encouraged to establish links with industry and engage in collaborative projects. There is also the option to study abroad with the Erasmus programmes currently running with Universities in Barcelona, Norway and Sweden.

The programme has an excellent track record in design competitions, awards and industry events such as Indigo (Paris) and New Designers.

Graduates from the Surface Pattern programmes have been extremely successful and continue to be recruited in a highly competitive market. Employment roles for graduates from the programme are varied and wide reaching and include:

Freelance working for textiles for fashion studio, fashion brands, designers, retail, interiors studios, on bespoke commissions for clients, producing own name products, large-scale design retail operation. Also formal employment as textiles designer, designer within design brand or retail operation, Stylist, Trend forecasting, Buyer for design related operations, Visual Merchandising. Also employment within arts organisation, museum, gallery, Curator, Self-employed designer maker supplying galleries, retail outlets, selling through high-end craft events, or own website.

Read less
The Master’s programme in Earth Surface and Water involves the study of natural and human-induced physical and geochemical processes, patterns, and dynamics of the Earth’s continental and coastal systems. Read more

EXPLORE PROCESSES AT OR NEAR THE EARTH'S SURFACE

The Master’s programme in Earth Surface and Water involves the study of natural and human-induced physical and geochemical processes, patterns, and dynamics of the Earth’s continental and coastal systems. This two-year programme provides you with knowledge that is essential to manage the planet sustainably, guarantee the availability of resources for future generations, and understand and avert natural hazards.

The main subject areas you will study consist of the dynamics of coastal and river systems, (geo-)hydrological processes, groundwater remediation, land degradation in dry lands and mountainous regions, natural hazards, and delta evolution on centennial and longer time scales.

Tracks

You can choose one of four tracks based on your interests in the field:

-Geohazards and Earth Observation: Land-degradation processes and natural hazards in and on the Earth's surface;

-Coastal Dynamics and Fluvial Systems: Natural and human-induces processes, patterns, and products in the world's coasts and
rivers;

-Hydrology: Movement, distribution, and quality of water on Earth;

-Environmental Geochemistry: Processes that control the functioning of natural environments at the Earth's surface.

The Earth Surface and Water programme trains students to quantitatively study the natural and human-induced physical and chemical processes, patterns, and dynamics of Earth’s continental and coastal systems as well as their responses to global change. Students explore and understand the modelling capabilities of the past, present, and future as well as the evolution of Earth’s environment, including human impact on this evolution.

Read less
Students on this course cultivate an innovative view of surface design. They are challenged to ruthlessly explore pattern and decoration, reflecting on the social, cultural and aesthetic context for surface pattern design in the 21st century. Read more
Students on this course cultivate an innovative view of surface design. They are challenged to ruthlessly explore pattern and decoration, reflecting on the social, cultural and aesthetic context for surface pattern design in the 21st century. New relationships like that of surfaces and light are being investigated, while new materials and technologies continually challenge designers to develop fresh ideas and methods. Students get to research and experiment with lots of materials and new technology to decorate ceramics, plastics, cloth, glass, wood, metal and paper. They use our cutting edge digital equipment to develop designs for wallpaper, tableware, floor coverings, interior products, garments and jewellery. We help our students find their own creative process and to develop their own direction and style which enables them to choose a rewarding career.

LEARNING ENVIRONMENT AND ASSESSMENT

Practical work is carried out within our extensive and very well equipped studios and workshops. A programme of guest lecturers and visits to exhibitions, workshops, manufacturers, etc. further supports study.

A special feature of this course is the blend of practice and theory which underpins the student projects. As a student on a MA course in the School of Art, Design and Performance you will belong to a postgraduate design community. You will study some modules alongside students from other design disciplines. Through participation in a common programme, you will experience a strong sense of community, sharing of knowledge and access to a wide range of staff skills and resources.

Practical and theoretical elements will be assessed both during and at the end of each module. Assessment strategies for the Practice modules will usually involve portfolio assessment, presentations, summaries of reflective journals and the learning agreement. There are intermediate exit awards at appropriate stages.

FURTHER INFORMATION

Surface pattern designers work with many different products, processes and materials. They may practice within conventional design studios in traditional industries as well as in the smaller creative industries. The student will be expected to develop a personal focus of research and design or craft practice, which should lead to a package of research activities (live projects, placements, competitions, attendance at exhibitions and trade fairs, etc.) appropriate to their field of study. Throughout the course, students are encouraged to pursue a critical enquiry alongside the physical development of work. They should move toward developing concepts and understanding context.

The core belief of the MA degree is that understanding for the Design Practitioner can only be achieved through doing, making and creating. Thus a central theme of the course is that of 'Reflective Practice' where academic and theoretical issues arise out of Practice itself and where the Practice is informed by the theoretical considerations. Students will be asked to keep a reflective journal to record their thoughts, ideas and discoveries.

The MA exists in the framework of the University modular scheme. The first step for every new student is a two to three week induction block in which the student's proposed area of study is discussed, negotiated and formulated with their supervisor into a learning agreement. Following this induction and diagnostic phase, students continue to develop their physical work in Surface Pattern Practice 1. In Semester 2, they undertake Practice 2, which involves the opportunity for field study or external placement. Running parallel with, and complementary to the practice modules, are two Research for Creative Design Practice modules, one studied in semester 1 and the other in Semester 2.

The course is concluded in Semester 3 with the Postgraduate Project/Dissertation and Surface Pattern Practice 3 modules. In the Practice module, students continue their investigation into a particular personal area of study, leading to a final assessment presentation or public body of work.

Fundamental to the philosophy of the course is providing the opportunity for students to explore and realise their individual aspirations and potential, creating a framework for developing as skilled and informed professional practitioners.

Read less
Summary Suitable for engineering, mathematics and physical sciences graduates, this course is led by world-class experts from the national Centre for Advanced Tribology (nCATS). Read more

Summary

Summary Suitable for engineering, mathematics and physical sciences graduates, this course is led by world-class experts from the national Centre for Advanced Tribology (nCATS). This programme provides a comprehensive and academically challenging exposure to modern issues in advanced mechanical engineering science. You may specialise in any relevant aspect of tribology, from the traditional concepts of friction and wear to the cutting-edge development in surface engineering and bioengineering.

Modules

Compulsory modules: Introduction to Advanced Mechanical Engineering Science; Surface Engineering; Bio, Nano and Modelling Aspects of Tribology; Microstructural and Surface Characterisation; MSc Research Project

Optional modules: further module options are available

Visit our website for further information...



Read less
Oil and gas remains one of our major energy resources and the recovery of these resources is increasingly important, just as it was in the last century. Read more

Overview

Oil and gas remains one of our major energy resources and the recovery of these resources is increasingly important, just as it was in the last century. What has changed with time is the need to recover more of the reservoir, operating in harsher environments both physically and economically. Equally there are challenges due to changes in knowledge and the relative lack of experience from engineers in the market. Traditionally in the UK, the vast majority of engineers entering the industry do so through two routes; first as facilities or surface engineers - chemical and process, mechanical and electrical engineering working on the processing systems to stabilise fluid from the reservoir. The second route is through the petroleum engineering or sub-surface engineering route which sees engineers develop knowledge and skills necessary to locate, drill and extract oil and gas reserves.

This programme (See http://www.postgraduate.hw.ac.uk/prog/msc-oilandgas-technology/ ) was been designed with the help of the industry to provide a cross over between surface and sub-surface engineering functions with the intent that future oil and gas operations can be better optimised to enhance recovery of the reserves. In order to maximise recovery, surface engineers in an operating company must communicate effectively with the reservoir and production engineers within their own company as well as develop relationships with and assess the work of contractors and vendors when designing and constructing facilities. Therefore, surface engineers need to be competent not only in the areas of process design, pipeline engineering, but also be familiar with reservoir engineering, production technology and a variety of other engineering and management subjects, such as safety and control, management of projects, economics and planning, etc.

The programme contains 8 taught courses covering key topics in surface and sub-surface engineering. Two projects towards the end of the programme provide opportunities for participants to demonstrate their knowledge in the design of a surface facility, and to study a specific topic of interest.

Scholarships available

We have a number of fully funded Scottish Funding Council (SFC) scholarships available for students resident in Scotland applying for Oil and Gas Technology. Find out more about this scholarship and how to apply http://www.hw.ac.uk/student-life/scholarships/postgraduate-funded-places.htm .

Programme content

For the MSc and PGDip degrees, students are required to take eight taught courses. MSc students then complete the programme by undertaking two 30 credit projects.

Find more information on programme content here http://www.postgraduate.hw.ac.uk/prog/msc-oilandgas-technology/

English language requirements

If you are not from a UKBA recognised English speaking country, we will need to see evidence of your English language ability. If your first degree was taught in English a letter from them confirming this will be sufficient. Otherwise the minimum requirement for English language is IELTS 6.5 or equivalent, with a minimum of 5.5 in each skill.

The University offers a range English language courses (See http://www.hw.ac.uk/study/english.htm ) to help you meet the English language requirement prior to starting your masters programme:
- 14 weeks English (for IELTS of 5.5 with no more than one skill at 4.5);
- 10 weeks English (for IELTS of 5.5 with minimum of 5.0 in all skills);
- 6 weeks English (for IELTS 5.5 with minimum of 5.5 in reading & writing and minimum of 5.0 in speaking & listening)
- 3 weeks English refreshers course (for students who meet the English condition for the MSc but wish to refresh their English skills prior to starting).

Find information on Fees and Scholarships here http://www.postgraduate.hw.ac.uk/prog/msc-oilandgas-technology/

Read less
Primarily vocational and practical, the course caters for those with career interests in contemporary textile design. The course helps students to strengthen personal creativity, design and style by taking a professional approach to textile design. Read more

Summary

Primarily vocational and practical, the course caters for those with career interests in contemporary textile design.

The course helps students to strengthen personal creativity, design and style by taking a professional approach to textile design. Students will explore major issues linked to textile design and benefit from a unified programme and work alongside textile, fashion and surface designers.

Learning will be based around studio and workshop practice, with personal programmes of study and joint lecture and seminar programmes. Art, craft and design interpretations of the disciplines are all supported and our highly experienced course team recognise the importance of having a personal and distinctive approach to your work and study. There are also ample opportunities to collaborate, exchange ideas and broaden your perspective.

Learning through studio and workshop practice, students will also benefit from our close connections with manufacturers, and get to experiment with a wide range of materials to create new and innovative products.

Modules

Modules include: Portfolio 1; Lecture and Seminar programme; Research Strategy; Portfolio 2, Portfolio 3 or Dissertation.

Assessment

The programme includes a mixture of practical projects and written work; students develop a portfolio of work that showcases students' abilities and ideas and is executed and managed in a professional manner; at each stage students also write reflective reports that encourage student to develop a critical and contextual framework within which to understand their practice and future career choices; students are assessed using a mixture of tutorial reviews, project work submissions and oral exams.

Read less
Creative Futures offers recent graduates and established practitioners a chance to continue to develop their chosen discipline and specialist practice at masters level. Read more
Creative Futures offers recent graduates and established practitioners a chance to continue to develop their chosen discipline and specialist practice at masters level. You will gain advanced creative, technical and business skills, a sophisticated understanding of the business environment and a formalised work experience placement. The aim is to enhance your appeal in the job market and/or provide you with the tools needed to set up in freelance practice or to create your own business. Students will receive tuition in business skills that are designed and delivered specifically for creative practitioners as well as access to our extensive workshops and specialist facilities.

The course is designed to provide maximum flexibility, whether it is being studied on a full or part-time basis: All modules have an extensive distance learning component, combined with intensive, full-day workshops.

Course content

Modules you will study include:
-Creativity and Enterprise
-Developing Knowledge, Creative, Technical, Digital and Business Skills
-Creative Futures: Work Experience
-Creative Futures: Masters Project

There will also be an opportunity to choose from the following option modules:
-The Marketing Context
-Personal Branding
-Design Management
-Community Arts in a Global Perspective
-Creativity and Innovation
-New Media and Society
-Culture and Identity

Read less
Creative Futures offers recent graduates and established practitioners a chance to continue to develop their chosen discipline and specialist practice at masters level. Read more
Creative Futures offers recent graduates and established practitioners a chance to continue to develop their chosen discipline and specialist practice at masters level. You will gain advanced creative, technical and business skills, a sophisticated understanding of the business environment and a formalised work experience placement. The aim is to enhance your appeal in the job market and/or provide you with the tools needed to set up in freelance practice or to create your own business. Students will receive tuition in business skills that are designed and delivered specifically for creative practitioners as well as access to our extensive workshops and specialist facilities.

The course is designed to provide maximum flexibility, whether it is being studied on a full or part-time basis. All modules have an extensive distance learning component, combined with intensive, full day workshops.

Course content

Modules you will study include:
-Creativity and Enterprise
-Developing Knowledge, Creative, Technical, Digital and Business Skills
-Creative Futures: Work Experience
-Creative Futures: Masters Project

There will also be an opportunity to choose from the following option modules:
-The Marketing Context
-Personal Branding
-Design Management
-Community Arts in a Global Perspective
-Creativity and Innovation
-New Media and Society
-Culture and Identity

Read less
Society urgently needs experts with a multidisciplinary education in atmospheric and Earth System sciences. Climate change and issues of air quality and extreme weather are matters of global concern, but which are inadequately understood from the scientific point of view. Read more
Society urgently needs experts with a multidisciplinary education in atmospheric and Earth System sciences. Climate change and issues of air quality and extreme weather are matters of global concern, but which are inadequately understood from the scientific point of view. Not only must further research be done, but industry and business also need environmental specialists with a strong background in natural sciences. As new regulations and European Union directives are adopted in practice, people with knowledge of recent scientific research are required.

Upon graduating from the Programme you will have competence in:
-Applying experimental, computational and statistical methods to obtain and analyse atmospheric and environmental data.
-Knowledge applicable to solving global challenges such as climate change, air pollution, deforestation and issues related to water resources and eutrophication.
-Making systematic and innovative use of investigation or experimentation to discover new knowledge.
-Reporting results in a clear and logical manner.

The University of Helsinki will introduce annual tuition fees to foreign-language Master’s programmes starting on August 1, 2017 or later. The fee ranges from 13 000-18 000 euros. Citizens of non-EU/EEA countries, who do not have a permanent residence status in the area, are liable to these fees. You can check this FAQ at the Studyinfo website whether or not you are required to pay tuition fees: https://studyinfo.fi/wp2/en/higher-education/higher-education-institutions-will-introduce-tuition-fees-in-autumn-2017/am-i-required-to-pay-tuition-fees/

Programme Contents

The six study lines are as follows:
Aerosol Physics
Aerosol particles are tiny liquid or solid particles floating in the air. Aerosol physics is essential for our understanding of air quality, climate change and production of nanomaterials. Aerosol scientists investigate a large variety of phenomena associated with atmospheric aerosol particles and related gas-to-particle conversion using constantly improving experimental, theoretical, model-based and data analysis methods. As a graduate of this line you will be an expert in the most recent theoretical concepts, measurement techniques and computational methods applied in aerosol research.

Geophysics of the Hydrosphere
Hydrospheric geophysics studies water in all of its forms using physical methods. It includes hydrology, cryology, and physical oceanography. Hydrology includes the study of surface waters such as lakes and rivers, global and local hydrological cycles as well as water resources and geohydrology, the study of groundwater. Cryology focuses on snow and ice phenomena including glacier mass balance and dynamics, sea ice physics, snow cover effects and ground frost. Physical oceanography covers saline water bodies, focusing on describing their dynamics, both large scale circulation and water masses, and local phenomena such as surface waves, upwelling, tides, and ocean acoustics. Scientists study the hydrosphere through field measurements, large and small scale modelling, and formulating mathematical descriptions of the processes.

Meteorology
Meteorology is the physics of the atmosphere. Its best-known application is weather forecasting, but meteorological knowledge is also essential for understanding, predicting and mitigating climate change. Meteorologists study atmospheric phenomena across a wide range of space and time scales using theory, model simulations and observations. The field of meteorology is a forerunner in computing: the development of chaos theory, for example, was triggered by the unexpected behaviour of a meteorological computer model. Meteorology in ATM-MP is further divided into dynamic meteorology and biometeorology. Dynamic meteorology is about large-scale atmospheric dynamics, modelling and observation techniques, whereas biometeorology focuses on interactions between the atmosphere and the underlying surface by combining observations and modelling to study the flows of greenhouse gases and energy with links to biogeochemical cycles, for example. As a graduate of the meteorology line, you will be an expert in atmospheric phenomena who can produce valuable new information and share your knowledge.

Biogeochemical Cycles
Biogeochemistry studies the processes involved in cycling of elements in terrestrial and aquatic ecosystems by integrating physics, meteorology, geophysics, chemistry, geology and biology. Besides natural ecosystems, it also studies systems altered by human activity such as forests under different management regimes, drained peatlands, lakes loaded by excess nutrients and urban environments. The most important elements and substances studied are carbon, nitrogen, sulphur, water and phosphorus, which are vital for ecosystem functioning and processes such as photosynthesis. Biogeochemistry often focuses on the interphases of scientific disciplines and by doing so, it also combines different research methods. It treats ecosystems as open entities which are closely connected to the atmosphere and lithosphere. You will thus get versatile training in environmental issues and research techniques. As a graduate of this line you will be an expert in the functioning of ecosystems and the interactions between ecosystems and the atmosphere/hydrosphere/lithosphere in the context of global change. You will have knowledge applicable for solving global challenges such as climate change, air pollution, deforestation and issues related to water resources and eutrophication.

Remote Sensing
Remote sensing allows the collection of information about the atmosphere, oceans and land surfaces. Various techniques are applied for monitoring the state and dynamics of the Earth system from the ground, aircraft or satellites. While Lidar and radar scan from the surface or mounted on aircraft, instruments on polar orbiting or geostationary satellites permit measurements worldwide. In atmospheric sciences remote sensing has found numerous applications such as observations of greenhouse and other trace gases, aerosols, water vapour, clouds and precipitation, as well as surface observations, for example of vegetation, fire activity, snow cover, sea ice and oceanic parameters such as phytoplankton. Synergistic satellite data analysis enables the study of important processes and feedback in the climate system. Remote sensing advances climate research, weather forecasting, air quality studies, aviation safety and the renewable energy industry. As a graduate of the remote sensing line you will have broad expertise in the operational principles of remote sensing instruments as well as methods of data collection, analysis and interpretation.

Atmospheric Chemistry and Analysis
Atmospheric chemistry studies the composition and reactions of the molecules that make up the atmosphere, including atmospheric trace constituents and their role in chemical, geological and biological processes, including human influence. The low concentrations and high reactivity of these trace molecules place stringent requirements on the measurement and modelling methods used to study them. Analytical chemistry is the science of obtaining, processing, and communicating information about the composition and structure of matter and plays an essential role in the development of science. Environmental analysis consists of the most recent procedures for sampling, sample preparation and sample analysis and learning how to choose the best analytical methods for different environmental samples. Physical atmospheric chemistry studies focus on the reaction types and reaction mechanisms occurring in the atmosphere, with emphasis on reaction kinetics, thermodynamics and modelling methods. As a graduate of this line you will have understanding of the chemical processes of the atmosphere and the latest environmental analytical methods, so you will have vital skills for environmental research.

Programme Structure

The basic degree in the Programme is the Master of Science (MSc). The scope of the degree is 120 credits (ECTS). As a prerequisite you will need to have a relevant Bachelor’s degree. The possible major subjects are Physics, Meteorology, Geophysics, Chemistry, and Forest Ecology. The programme is designed to be completed in two years. Studies in ATM-MP consist of various courses and project work: lecture courses, seminars, laboratory work and intensive courses.

Your first year of studies will consist mainly of lecture courses. During the second year, you must also participate in the seminar course and give a presentation yourself. There is also a project course, which may contain laboratory work, data analysis, or theoretical or model studies. You will have to prepare a short, written report of the project. There are also several summer and winter schools as well as field courses for students in the Programme. Many of the courses take place at the Hyytiälä Forestry Field Station in Southern Finland. The intensive courses typically last 5–12 days and include a concise daily programme with lectures, exercises and group work.

Career Prospects

There is a global need for experts with multidisciplinary education in atmospheric and environmental issues. Governmental environmental agencies need people who are able to interpret new scientific results as a basis for future legislation. Industry, transportation and businesses need to be able to adapt to new regulations.

As a Master of Science graduating from the Programme you will have a strong background of working with environmental issues. You will have the ability to find innovative solutions to complex problems in the field of environmental sciences, climate change and weather forecasting. Graduates of the Programme have found employment in Meteorological Institutes and Environmental Administration in Finland and other countries, companies manufacturing instrumentation for atmospheric and environmental measurements and analysis, and consultancy companies. The Master's degree in ATM-MP also gives you a good background if you intend to proceed to doctoral level studies.

Internationalization

The Programme offers an international study environment with more than 30% of the students and teaching staff coming from abroad.

The ATM-MP is part of a Nordic Nordplus network in Atmosphere-Biosphere Studies, which gives you good opportunities to take courses currently in fourteen Nordic and Baltic universities. There are also several Erasmus agreements with European universities. The PanEurasian Experiment (PEEX) project provides you with opportunities to carry out part of your studies especially in China and Russia.

Research Focus

All the units teaching in the Programme belong to the National Centre of Excellence (FCoE) in Atmospheric Science – From Molecular and Biological processes to the Global Climate (ATM), which is a multidisciplinary team of the Departments of Physics, Forest Sciences and Chemistry at the University of Helsinki, the Department of Applied Physics at the University of Eastern Finland (Kuopio) and the Finnish Meteorological Institute.

The main objective of FCoE ATM is to quantify the feedbacks between the atmosphere and biosphere in a changing climate. The main focus of the research is on investigating the following topics:
1. Understanding the climatic feedbacks and forcing mechanisms related to aerosols, clouds, precipitation and biogeochemical cycles.
2. Developing, refining and utilising the newest measurement and modelling techniques, from quantum chemistry to observations and models of global earth systems.
3. Creating a comprehensive understanding of the role of atmospheric clusters and aerosol particles in regional and global biogeochemical cycles of water, carbon, sulphur, nitrogen and their linkages to atmospheric chemistry.
4. Integrating the results in the context of understanding regional and global Earth systems.

In addition to the research focus of FCoE, current research in hydrospheric geophysics at Helsinki University has an emphasis on cryology, with a focus on the effect of aerosols on Indian glaciers, the impact of climate change on the Arctic environment, the dynamics of the Austfonna ice cap in Svalbard, and the winter season in the coastal zone of the Baltic Sea.

Read less
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance. Read more
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance.

Course details

The programme of lectures and project work, encompasses a wide range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The course is applied in nature and has been designed so that on completion, you are technically well prepared for a career in industry.

Professional accreditation

Our MSc Petroleum Engineering is accredited by the Energy Institute, under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC.

By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification, and the earning potential of chartered petroleum engineers can exceed £100,000 a year.

Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase the industrial networking opportunities for students.

What you study

For the Postgraduate Diploma (PgDip) award you must successfully complete 120 credits of taught modules. For an MSc award you must successfully complete 120 credits of taught modules and a 60-credit master's research project.

You select your master’s research projects from titles suggested by either industry or our academic staff, but you may also, with your supervisor’s agreement, suggest your own titles.

Core modules
-Drill Engineering and Well Completion
-Hydrocarbon Production Engineering
-Material Balance and Recovery Mechanisms
-Petroleum Chemistry
-Petroleum Economics and Simulation
-Petroleum Reservoir Engineering
-Practical Health and Safety Skills
-Research and Study Skills

MSc candidates
-Research Project

Modules offered may vary.

Teaching

The course is delivered using a series of lectures, tutorials and laboratory sessions.

Our MSc Petroleum Engineering is supported by excellent laboratory and engineering machine workshop facilities including fluid flow measurement, computer modelling laboratories, other laboratories and workshops, an excellent library and computing facilities. We have invested around £150,000 in laboratory equipment particularly in within core analysis and enhanced oil recovery.

We have several computer laboratories equipped with specialised and general-purpose software. This generous computing provision gives you extended access to industry-standard software – it allows you to develop skills and techniques using important applications. For upstream processes, Teesside University has access to educational software packages like Petrel, Eclipse, CMG, PIPESIM and Ecrin to simulate the behaviour of oil reservoirs, calculating oil in situ, and oil and gas production optimisation. As for downstream processes, you can use HYSYS to test different scenarios to optimise plant designs.

Facilities include:
Enhanced oil recovery and core analysis laboratory
The flow through porous media, enhanced oil recovery techniques and core analysis is done in the core flooding lab. The lab is equipped with core plugging and trimming, core preparation and conventional core properties measurement equipment. At a higher level, the lab is also equipped to perform some special core analysis measurements such as fluid relative permeabilities as well as rock surface wetting quantification.

Petrophysics laboratory
The petrophysics lab allows you to study the properties of rocks, particularly the measurement of porosity and evaluation of permeability. The lab is equipped with sieve analysis equipment to investigate grain sorting and its effect on permeability and the porosity of rocks. You are able to gauge saturation and fluid flow through porous media.

Surface characterisation laboratory
The rock surface characterisation lab is equipped with a zeta analyser to measure the rock surface electric charge. You study the rock surface wetting state, adsorption and desorption potential using digitised contact angle apparatus and thermos-gravimetric apparatus respectively.

Drilling laboratory
The drilling lab is equipped with mud measurement equipment including mud density, mud rheology and mud filtration systems to enable you to measure mud cake and formation damage. The lab highlights the importance of oilfield drilling fluids.

Assessment varies from module to module. The assessment methodology could include in-course assignments, design exercises, technical reports, presentations or formal examinations. For your MSc project you prepare a dissertation.

Employability

These courses provide specialist education tailored to the requirements of both the upstream and downstream petroleum industry. The relevance of this education combined with careful selection of candidates has encouraged oil and gas companies to target our graduates for recruitment over the years.

The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy, with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists.

It is widely recognised that a steady influx of fresh people and ideas is vital for the longer-term success and stability of an organisation, and it is therefore expected that recruitment will continue, especially for those with motivation and the appropriate qualifications.

Read less
This challenging inter-disciplinary programme spans the major classes of engineering materials used in modern high technology manufacturing and industry. Read more
This challenging inter-disciplinary programme spans the major classes of engineering materials used in modern high technology manufacturing and industry. The course has considerable variety and offers career opportunities across a wide range of industry sectors, where qualified materials scientists and engineers are highly sought after.

This course is accredited by the Institute of Materials, Minerals and Mining (IOM3), allowing progression towards professional chartered status (CEng) after a period of relevant graduate-level employment.

Core study areas include advanced characterisation techniques, surface engineering, processing and properties of ceramics and metals, design with engineering materials, sustainability and a project.

Optional study areas include plastics processing technology, industrial case studies, materials modelling, adhesive bonding, rubber compounding and processing, and polymer properties.

See the website http://www.lboro.ac.uk/study/postgraduate/programmes/departments/materials/materials-science-tech/

Programme modules

Full-time Modules:
Core Modules
- Advanced Characterisation Techniques (SL)
- Surface Engineering (SL)
- Ceramics: Processing and Properties (SL)
- Design with Engineering Materials (SL)
- Sustainable Use of Materials (OW)
- Metals: Processing and Properties (SL)
- MSc Project

Optional Modules
- Plastics Processing Technology (OW)
- Industrial Case Studies (OW)
- Materials Modelling (SL)

Part-time Modules:
Core Modules
- Ceramics: Processing and Properties (DL)
- Design with Engineering Materials (DL)
- Sustainable Use of Materials (OW or DL)
- Metals: Processing and Properties (DL)
- Surface Engineering (DL)
- Plastics Processing Technology (OW)
- MSc Project

Optional Modules
- Industrial Case Studies (OW)
- Adhesive Bonding (OW)
- Rubber Compounding and Processing (OW or DL)

Alternative modules:*
- Polymer Properties (DL)
- Advanced Characterisation Techniques (SL)
- Materials Modelling (SL)

Key: SL = Semester-long, OW = One week, DL = Distance-learning
Alternative modules* are only available under certain circumstances by agreement with the Programme Director.

Selection

Interviews may be held on consideration of a prospective student’s application form. Overseas students are often accepted on their grades and strong recommendation from suitable referees.

Course structure, assessment and accreditation

The MSc comprises a combination of semester-long and one week modules for full-time students, whilst part-time students study a mix of one week and distance-learning modules.

MSc students undertake a major project many of which are sponsored by our industrial partners. Part-time student projects are often specified in conjunction with their sponsoring company and undertaken at their place of work.

All modules are 15 credits. The MSc project is 60 credits.

MSc: 180 credits – six core and two optional modules, plus the MSc project.
PG Diploma: 120 credits – six core and two optional modules.
PG Certificate: 60 credits – four core modules.

- Assessment
Modules are assessed by a combination of written examination, set coursework exercises and laboratory reports. The project is assessed by a dissertation, literature review and oral presentation.

- Accreditation
Both MSc programmes are accredited by the Institute of Materials, Minerals and Mining (IOM3), allowing progression towards professional chartered status (CEng) after a period of relevant graduate-level employment.

Careers and further Study

Typical careers span many industrial sectors, including aerospace, power generation, automotive, construction and transport. Possible roles include technical and project management, R&D, technical support to manufacturing as well as sales and marketing.
Many of our best masters students continue their studies with us, joining our thriving community of PhD students engaged in materials projects of real-world significance

Bursaries and Scholarships

Bursaries are available for both UK / EU and international students, and scholarships are available for good overseas applicants.

Why Choose Materials at Loughborough?

The Department has contributed to the advancement and application of knowledge for well over 40 years. With 21 academics and a large support team, we have about 85 full and part-time MSc students, 70 PhD students and 20 research associates.

Our philosophy is based on the engineering application and use of materials which, when processed, are altered in structure and properties.
Our approach includes materials selection and design considerations as well as business and environmental implications.

- Facilities
We are also home to the Loughborough Materials Characterisation Centre – its state of-the-art equipment makes it one of the best suites of its kind in Europe used by academia and our industrial partners.
The Centre supports our research and teaching activities developing understanding of the interactions of structure and properties with processing and product performance.

- Research
Our research activity is organised into 4 main research groups; energy materials, advanced ceramics, surface engineering and advanced polymers. These cover a broad span of research areas working on today’s global challenges, including sustainability, nanomaterials, composites and processing. However, we adopt an interdisciplinary approach to our research and frequently interact with other departments and Research Schools.

- Career prospects
Over 90% of our graduates were in employment and / or further study six months after graduating. Our unrivalled links with industry are
hugely beneficial to our students. We also tailor our courses according to industrial feedback and needs, ensuring our graduates are well prepared

Find out how to apply here http://www.lboro.ac.uk/study/postgraduate/programmes/departments/materials/materials-science-tech/

Read less
MA Ceramic Design is recognised worldwide as one of the leading postgraduate programmes in ceramic design for small and mass manufacture. Read more
MA Ceramic Design is recognised worldwide as one of the leading postgraduate programmes in ceramic design for small and mass manufacture. Taught in Stoke-on-Trent, the home of UK ceramics for over two centuries in the Potteries, this long-established course consistently produces career-ready graduates that are in demand by leading ceramic companies both in the UK and overseas. With world-famous ceramic manufacturers quite literally on the doorstep, Stoke-on-Trent provides a unique venue for the study of ceramic design.

This course provides a design-led creative experience of ceramics within a broad subject context. Designing through intelligent making allows you to access ideas through a unique material. The deep knowledge of one material helps you to appreciate the opportunities in ceramics but also its translation into other materials and professional opportunities. Whether your personal aspirations are embedded in 2D surface and pattern, and or 3D shape, form and function.

The relationship between the course and the global ceramic industry is mutually beneficial and is primarily responsible for the unique character and international reputation of the course. The strength of this award lies in the accumulated wealth of specialist knowledge and practical skills, which are the essential tools of the ceramics designer; and in the good working practices developed over many years. In the close working relationship with industry, and in the clarity of purpose that ensures academic coherence, and the credibility of the award.

Students are encouraged to pursue new and innovative ideas, redefining established ceramic craft and ceramic design market opportunities. These ideas may now be less wedded to the immediate perceived needs of the mass manufacturing industry and for the mass market. As a consequence encouraging students to take a wider perhaps more entrepreneurial, enterprising standpoint – working as designer-producers for example, engaging with small to medium sized factories in developing aspirational products of contemporary relevance with ‘added value’ aimed potentially at new and different niche markets.

The MA Ceramic Design course has in recent years provided the creative genesis for The New English ceramic design brand and the University’s unique Flux, blue and white fine bone china collection.

This course can be studied part time. For more information on part time study, see the website: http://www.staffs.ac.uk/course/SSTK-06801.jsp?utm_source=findamasters&utm_medium=courseprofile&utm_campaign=postgraduate

Course content

Semester 1
-Tools and Techniques
-Collaborative Project

Semester 2
-Ceramic Design, Professional Pathways
-Creativity & Innovation

Semester 3
The Masters Project

Graduate destinations

Many of our Ceramic Design graduates now work as designers or senior managers and creative directors within the ceramics and related creative industries. Some have set up in business as designer-producers or as freelance design consultants. And others have become retail developers, stylists, buyers, trend forecasters, lecturers and teachers.

Other admission requirements

For you to be able to execute your own ideas whilst on the course, You would be expected to demonstrate:
-Your ability to communicate your creative design ideas visually, this is critically important. Through traditional sketching and drawing (drawing with your own hand) and through digital techniques (the use of appropriate computer softwares).
-A broad understanding and experience of ceramic moulded techniques (the use of plaster moulds, typically slipcasting) or hand making techniques would be expected.
-Alternatively you may be interested in ceramic surface, ideas for surface pattern design whether this be for graphics; textiles or ceramics.
-Evidence that you have an awareness of the global marketplace for ceramic design, and as such develop innovative ceramic ideas informed by this knowledge.

Read less
Student research degrees in Metallic Materials are based within a vibrant research group, which is one of the largest in the UK. The research encompasses all aspects of metals alloys and composites, including their design, processing, forming, joining and performance. Read more
Student research degrees in Metallic Materials are based within a vibrant research group, which is one of the largest in the UK. The research encompasses all aspects of metals alloys and composites, including their design, processing, forming, joining and performance.

Research Focus

The research extends from fundamental science, and the `blue skies' development of novel technologies and techniques, to the very applied, with the aim of improving our understanding of the basic governing principles, process simulation and physical modelling. While our research is broad ranging, we focus on light alloys for aerospace and transport applications, high-temperature materials for aeroengines and power generation, and metal composites, as well as the failure of metallic materials, their environmental degradation and surface treatment. The research is supported by state of the art equipment for materials characterisation, testing, simulation and processing.

Examples of recent student PhD projects include; Microstructure Modelling for Friction Stir Welding, Laser Surface treatment of Aerospace Alloys, Advanced Strain Mapping for Structural Integrity application, Dynamic Grain Growth in Super Plastic Forming, Dynamics and Morphology of Stress Corrosion Cracking Using 3D X-ray Tomography, and Laser Depositioning of Nickel Base Superalloys.

Industry links

We have strong links with industry and the funding councils and sponsorship from global companies, including; Airbus, Alcan, Alcoa, British Energy, Rolls Royce, BNF and Jaguar. Major initiatives include the £6M EPSRC-Manchester Portfolio Partnership in Light Alloys for Environmentally Sustainable Transport and the Materials Performance Centre, a research alliance established with Nexia Solutions (supported by the NDA) in 2002, and partnered with British Energy, Serco Assurance, EDF and Westinghouse.

Facilities

To underpin the research and teaching activities, we have established state-of-the-art laboratories, which allow comprehensive characterisation and development of materials. These facilities range from synthetic/textile fibre chemistry to materials processing and materials testing.

To complement our teaching resources, there is a comprehensive range of electrochemical, electronoptical imaging and surface and bulk analytical facilities and techniques.

Read less
Student research degrees in Metallic Materials are based within a vibrant research group, which is one of the largest in the UK. The research encompasses all aspects of metals alloys and composites, including their design, processing, forming, joining and performance. Read more
Student research degrees in Metallic Materials are based within a vibrant research group, which is one of the largest in the UK. The research encompasses all aspects of metals alloys and composites, including their design, processing, forming, joining and performance.

Research Focus

The research extends from fundamental science, and the `blue skies' development of novel technologies and techniques, to the very applied, with the aim of improving our understanding of the basic governing principles, process simulation and physical modelling. While our research is broad ranging, we focus on light alloys for aerospace and transport applications, high-temperature materials for aeroengines and power generation, and metal composites, as well as the failure of metallic materials, their environmental degradation and surface treatment. The research is supported by state of the art equipment for materials characterisation, testing, simulation and processing.

Examples of recent student PhD projects include; Microstructure Modelling for Friction Stir Welding, Laser Surface treatment of Aerospace Alloys, Advanced Strain Mapping for Structural Integrity application, Dynamic Grain Growth in Super Plastic Forming, Dynamics and Morphology of Stress Corrosion Cracking Using 3D X-ray Tomography, and Laser Depositioning of Nickel Base Superalloys.

Industry links

We have strong links with industry and the funding councils and sponsorship from global companies, including; Airbus, Alcan, Alcoa, British Energy, Rolls Royce, BNF and Jaguar. Major initiatives include the £6M EPSRC-Manchester Portfolio Partnership in Light Alloys for Environmentally Sustainable Transport and the Materials Performance Centre, a research alliance established with Nexia Solutions (supported by the NDA) in 2002, and partnered with British Energy, Serco Assurance, EDF and Westinghouse.

Facilities

To underpin the research and teaching activities, we have established state-of-the-art laboratories, which allow comprehensive characterisation and development of materials. These facilities range from synthetic/textile fibre chemistry to materials processing and materials testing.

To complement our teaching resources, there is a comprehensive range of electrochemical, electronoptical imaging and surface and bulk analytical facilities and techniques.

Read less
The MA in Fashion Textile Practices aims to cover a vastly changing environment. As a broad subject area this course allows you to explore a varied range of fashion and textile directions. Read more
The MA in Fashion Textile Practices aims to cover a vastly changing environment. As a broad subject area this course allows you to explore a varied range of fashion and textile directions. It offers continuing or recent graduates opportunities to enhance their knowledge, skills, creativity and employment prospects, through imaginative enquiry into different fashion, textile and surface platforms and processes.
Our MA in Fashion Textile Practices aims to combine advanced creative, aesthetic and technical design skills. You will normally have a degree in a related subject (Fashion Design, Textile or Surface Design, Textile Crafts), may be seeking to develop fresh approaches to your subject (creative pattern cutting, design for fashion, interiors or exterior architectural surfaces, future materials, 3D printed textiles or surfaces, advancing your weave, embroidery, knit or print skills, or textile art), or may wish to build your portfolio for fashion, textile or surface roles in industry in the future. A portfolio of work or ideas is required for subject entry.

Read less

Show 10 15 30 per page



Cookie Policy    X