• University of Derby Online Learning Featured Masters Courses
  • Northumbria University Featured Masters Courses
  • Aberystwyth University Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Leeds Featured Masters Courses

Postgrad LIVE! Study Fair

Birmingham | Bristol | Sheffield | Liverpool | Edinburgh

Cranfield University Featured Masters Courses
FindA University Ltd Featured Masters Courses
Southampton Solent University Featured Masters Courses
Nottingham Trent University Featured Masters Courses
Swansea University Featured Masters Courses
"services" AND "engineeri…×
0 miles

Masters Degrees (Services Engineering)

We have 791 Masters Degrees (Services Engineering)

  • "services" AND "engineering" ×
  • clear all
Showing 1 to 15 of 791
Order by 
If you’ve completed an undergraduate engineering degree and want to continue expanding your knowledge and enhancing your skills, GCU’s MSc Building Services Engineering is for you. Read more

If you’ve completed an undergraduate engineering degree and want to continue expanding your knowledge and enhancing your skills, GCU’s MSc Building Services Engineering is for you. Master this vibrant, essential discipline and achieve eligibility for Chartered Engineer status.

Chartered building services engineers with the broad skillsets to tackle complex technical challenges are in high demand. Their work brings together expertise in both construction and engineering, offering excellent career opportunities. With the advanced post-graduate study offered by GCU’s MSc Building Services Engineering, you’ll be prepared for a successful career in this important field.

The programme is approved by the Chartered Institution of Building Services Engineers (CIBSE) and the Energy Institute. Together with an accredited BEng Honours degree, the MSc provides an educational foundation for you to achieve full CEng status.

  • Broaden your knowledge of all technical aspects of building services design
  • Gain more experience tackling a variety of diverse technical challenges
  • Learn about building management
  • Progress toward full CEng status

At GCU, you’ll find a welcoming community of career-focused professionals who are dedicated to the common good. While you develop your skills and increase your expertise to make a positive impact through your work, your welcoming classmates, colleagues and teachers at GCU will both challenge and support you.

What you will study

The building services engineering profession is a vibrant and important component of both the construction and engineering sectors of industry. The MSc Building Services Engineering is aimed at engineering graduates to enable them to progress towards full chartered (CEng) status.

There is a strong demand for good quality chartered building services engineers who have the wide and multi-disciplinary knowledge that enables them to operate effectively on projects involving diverse technical challenges. Engineers now require a period of postgraduate study after achieving an Honours degree on an accredited BEng programme before they can become eligible for chartered (CEng) status. The MSc Building Services Engineering programme has been designed primarily as a period of further learning to follow an honours degree in building services engineering or environmental engineering.

The programme offers you the opportunity to broaden your knowledge and experience of all technical aspects of building services design as well as providing an understanding of building management.

Assessment methods

Various methods are used to assess the modules depending on the nature of the module. These include written examination, course work, and oral presentation. Normally there is more than one assessment component in each module.

HM Forces

In partnership with HM Forces, GCU has identified this programme is being particularly suited to military and ex-military men and women. Visit the HM Forces Careers Zone for more information on the services we provide.

Accreditation

The programme is approved by the Chartered Institution of Building Services Engineers (CIBSE) and the Energy Institute (EI). The MSc and a suitable accredited BEng (Hons) degree will together form the educational base for full CEng status.

Graduate prospects

The MSc Building Services Engineering will give you the preparation you need for a successful career. With a 96% graduate employment rate for GCU alumni, you can count on excellent prospects.

Graduates of this programme have many options, both within the UK and with firms across the globe. They design mechanical and electrical services for buildings of all kinds, work as consultants or become members of a design-and-build construction team. They manage building or shipping facilities. They also work on either the technical or management side of installing and commissioning equipment and systems.



Read less
If you’ve completed an undergraduate engineering degree and want to continue expanding your knowledge and enhancing your skills, GCU’s MSc Building Services Engineering is for you. Read more

If you’ve completed an undergraduate engineering degree and want to continue expanding your knowledge and enhancing your skills, GCU’s MSc Building Services Engineering is for you. Master this vibrant, essential discipline and achieve eligibility for Chartered Engineer status.

Chartered building services engineers with the broad skillsets to tackle complex technical challenges are in high demand. Their work brings together expertise in both construction and engineering, offering excellent career opportunities. With the advanced post-graduate study offered by GCU’s MSc Building Services Engineering, you’ll be prepared for a successful career in this important field.

The programme is approved by the Chartered Institution of Building Services Engineers (CIBSE) and the Energy Institute. Together with an accredited BEng Honours degree, the MSc provides an educational foundation for you to achieve full CEng status.

  • Broaden your knowledge of all technical aspects of building services design
  • Gain more experience tackling a variety of diverse technical challenges
  • Learn about building management
  • Progress toward full CEng status

At GCU, you’ll find a welcoming community of career-focused professionals who are dedicated to the common good. While you develop your skills and increase your expertise to make a positive impact through your work, your welcoming classmates, colleagues and teachers at GCU will both challenge and support you.

What you will study

The building services engineering profession is a vibrant and important component of both the construction and engineering sectors of industry. The MSc Building Services Engineering is aimed at engineering graduates to enable them to progress towards full chartered (CEng) status.

There is a strong demand for good quality chartered building services engineers who have the wide and multi-disciplinary knowledge that enables them to operate effectively on projects involving diverse technical challenges. Engineers now require a period of postgraduate study after achieving an Honours degree on an accredited BEng programme before they can become eligible for chartered (CEng) status. The MSc Building Services Engineering programme has been designed primarily as a period of further learning to follow an honours degree in building services engineering or environmental engineering.

The programme offers you the opportunity to broaden your knowledge and experience of all technical aspects of building services design as well as providing an understanding of building management.

Assessment methods

Various methods are used to assess the modules depending on the nature of the module. These include written examination, course work, and oral presentation. Normally there is more than one assessment component in each module.

HM Forces

In partnership with HM Forces, GCU has identified this programme is being particularly suited to military and ex-military men and women. Visit the HM Forces Careers Zone for more information on the services we provide.

Accreditation

The programme is approved by the Chartered Institution of Building Services Engineers (CIBSE) and the Energy Institute (EI). The MSc and a suitable accredited BEng (Hons) degree will together form the educational base for full CEng status.

Graduate prospects

The MSc Building Services Engineering will give you the preparation you need for a successful career. With a 96% graduate employment rate for GCU alumni, you can count on excellent prospects.

Graduates of this programme have many options, both within the UK and with firms across the globe. They design mechanical and electrical services for buildings of all kinds, work as consultants or become members of a design-and-build construction team. They manage building or shipping facilities. They also work on either the technical or management side of installing and commissioning equipment and systems.



Read less
This course is aimed at professional engineers aspiring to increased management responsibility in the building services sector or who have reached a stage in their careers when they are carrying increasing management responsibility. Read more

About the course

This course is aimed at professional engineers aspiring to increased management responsibility in the building services sector or who have reached a stage in their careers when they are carrying increasing management responsibility.

It caters to the worldwide demand for building services engineering managers who have a sound knowledge of engineering and management principles – and the ability to apply this knowledge to complex situations.

Management modules cover engineering finance and accounting, people management, business organisation and facilities and contract management.

Aims

Building Service Engineers help buildings to deliver on their potential by working with architects and construction engineers to produce buildings that offer the functionality and comfort we expect, with the minimum impact on our environment. They design the lighting appropriate for the space, the heating, cooling, ventilation and all systems that ensure comfort, health and safety in all types of buildings, residential commercial and industrial.

Building services engineering is an interdisciplinary profession. It involves the specification, design, installation and management of all the engineering services associated with the built environment.

With the growing complexity of engineering services in modern buildings and the significance of energy conservation and pollution control, the role of the building services engineer is becoming increasingly important.

As an interdisciplinary profession that involves the specification, design, installation and management of all the engineering services associated with the built environment, comfort and function also need to be combined – which calls for engineers with a wide range of knowledge and skills.

This MSc programme is for:

Recent engineering and technology graduates, moving into building services and related disciplines.
Established engineers and technologists, working in building services and faced with the challenge of new areas of responsibility.
Engineers who want to develop technical understanding and expertise across the multi-disciplines of building services engineering.
Managers and designers, who need to broaden their experience and require updating.
Lecturers in higher education, moving into or requiring updating in building services engineering.
Others with engineering and technology backgrounds, perhaps working in advisory or consultancy roles, who wish to familiarise themselves with building services engineering. However, choice of course will be dependent upon the type and extent of knowledge and skills required.

Course Content

Modes of Study
3-5 Years Distance Learning

The distance learning programme is designed to enable you to conduct most of your studies at home, in your own time and at your own pace.

There is no requirement to attend lectures at Brunel University and there is no set timetable of lectures, instead you follow a structured programme of self-study at home or at work. This gives you the freedom to arrange a work programme to suit yourself and you should usually allow about twelve hours each week for study.

There are set submission dates for assignments but we have tried to design the programme so that they are well-spaced, giving you the maximum flexibility in your study plans.

You can take between three and five years to complete the course. The average is three years, with students taking four modules in the first year, four modules in the second year and the dissertation in the third year. However, depending on your other commitments you can take longer up to a maximum of five years.

You are supplied with a study pack in the form of textbooks and CD-ROMs; you have assignments to submit and exams to sit each year.

Examinations can be taken either at Brunel University or in the country you are resident in. We have an extensive network of organisations (universities, colleges and British Council offices) throughout the world who will provide invigilation services.

The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Compulsory Modules

Building Heat Transfer and Air Conditioning
Electrical Services and Lighting Design
Acoustics, Fire, Lifts and Drainage
Engineering Finance and Accounting
Management of People in Engineering Activities
Organisation of Engineering Business
Management of Facilities and Engineering Contracts
Dissertation

Students should choose one of the two themes below:

Theme A - Traditional

Energy Conversion Technologies
This element provides a broad introduction to the principles of energy conversion and thermodynamic machines and demonstrates their application to energy conversion and management in buildings. Emphasis is placed on refrigeration plant, energy conversion plant and energy management.
Refrigeration covers the basic principles and components of vapour compression systems, heat pumps and absorption systems.
Energy Conversion considers power cycles, combined heat and power, combustion processes, boiler plant, thermal energy storage and environmental impacts of plant operation.

Theme B - Renewable

Renewable Energy Technologies
This element includes: energy sources, economics and environmental impact, energy storage technologies, the role of renewables, solar thermal, solar electricity, wind power generation, hydro, tidal and wave power, biofuels, building integrated renewables.

Special Features

There are several advantages in choosing Brunel's Building Services programme:

Award-winning courses: Building Services Engineering courses at Brunel have been awarded the Happold Brilliant Award for teaching excellence by the Chartered Institution of Building Services Engineers.

Relevance: it is well established within the building services industry, with sponsors of students that include major design and contracting organisations, area health authorities, local authorities and the British Council, as well as several national governments.

Applicability: emphasis on applications enables students and employers to benefit immediately from the skills and knowledge gained.

Responsiveness: Brunel's proximity to London, where large and innovative building developments have been taking place over the last decade, enables rapid infusion of new ideas and technological innovations into the programme content.

Excellent facilities

We have extensive and well-equipped laboratories, particular areas of strength being in fluid and biofluid mechanics, IC engines, vibrations, building service engineering, and structural testing. Our computing facilities are diverse and are readily available to all students. The University is fully networked with both Sun workstations and PCs. Advanced software is available for finite and boundary element modelling of structures, finite volume modelling of flows, and for the simulation of varied control systems, flow machines, combustion engines, suspensions, built environment, and other systems of interest to the research groups.

Accreditation

The course is approved by the Chartered Institute of Building Services Engineers (CIBSE) and the Institution of Mechanical Engineers (IMechE) as appropriate additional academic study (further learning) for those seeking to become qualified to register as Chartered Engineers (CEng).

Teaching

Students are supplied with a study pack in the form of text books and CD-ROMs; you have assignments to submit and exams to sit each year. Examinations can be taken either at Brunel University or in the country you are resident in.
We have an extensive network of organisations (Universities, Colleges and British Council Offices) throughout the world who will provide invigilation services. The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Assessment

Each module is assessed either by formal examination, written assignments or a combination of the two. Cut-off dates for receipt of assignments are specified at the beginning of each stage. Examinations are normally taken in May.
Successful completion of the taught modules allows the student to proceed to the dissertation stage. To qualify for the award of the MSc degree, the student must submit a satisfactory dissertation.

Read less
This programme responds to the worldwide demand for building services engineers who have a sound knowledge of engineering principles and the ability to apply this knowledge within the building services industry. Read more

About the course

This programme responds to the worldwide demand for building services engineers who have a sound knowledge of engineering principles and the ability to apply this knowledge within the building services industry.

Professional ‘Building Services Engineers’ design all of the systems that are necessary in a building for occupants to carry out their business. These systems include: heating, lighting, air-conditioning and electrical systems. The role is increasingly involved with the provision of sustainable, energy efficient and green building within our society. Services have to be carefully designed and installed so that they are unobtrusive and aesthetically pleasing, and also work in harmony with the architecture of the building. The programme will respond to the worldwide demand for building services engineers who have a sound knowledge engineering principles and the ability to apply this knowledge to the complex situations prevailing within the building services industry.

The course is available either as a full-time, 1-year programme at Brunel or as a 3-to-5 year distance learning programme.

Aims

With the growing complexity of engineering services in modern buildings and the significance of energy conservation and emissions control, the role of the building services engineer is becoming increasingly important.

As an interdisciplinary profession that involves the specification, design, installation and management of all the engineering services associated with the built environment, comfort and function also need to be combined – which calls for engineers with a wide range of knowledge and skills.

This MSc programme is suitable for:

Recent engineering and technology graduates, moving into building services and related disciplines.
Established engineers and technologists, working in building services and faced with the challenge of new areas of responsibility.
Engineers who want to develop technical understanding and expertise across the multi-disciplines of building services engineering.
Managers and designers, who need to broaden their experience and require updating.
Lecturers in higher education, moving into or requiring updating in building services engineering.
Others with engineering and technology backgrounds, perhaps working in advisory or consultancy roles, who wish to familiarise themselves with building services engineering. However, choice of course will be dependent upon the type and extent of knowledge and skills required.

Course Content

Modes of Study

1 Year Full-Time: The taught element of the course (September to April) includes seven modules; delivery will be by a combination of lectures, tutorials and group/seminar work. A further four months (May to September) is spent undertaking the dissertation.

3-5 Years Distance Learning: The distance learning programme is designed to enable you to conduct most of your studies at home, in your own time and at your own pace.

There is no requirement to attend lectures at Brunel University and there is no set timetable of lectures, instead you follow a structured programme of self-study at home or at work. This gives you the freedom to arrange a work programme to study yourself and you should usually allow about twelve hours each week for study.

There are set submission dates for assignments but we have tried to design the programme so that they are well-spaced, giving you the maximum flexibility in your study plans.

You can take between three and five years to complete the course. The average is three years, with students taking four modules in the first year, four modules in the second year and the dissertation in the third year. However, depending on your other commitments you can take longer up to a maximum of five years.

You are supplied with a study pack in the form of textbooks and CD-ROMs; you have assignments to submit and exams to sit each year.

Examinations can be taken either at Brunel University or in the country you are resident in. We have an extensive network of organisations (universities, colleges and British Council offices) throughout the world who will provide invigilation services.

The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Typical Modules

The course comprises four core modules, three technical modules and a dissertation. The taught modules are:

Core Modules:

Building Heat Transfer and Air Conditioning
Electrical Services and Lighting Design
Acoustics, Fire, Lifts and Drainage
Energy Conversion Technologies
Dissertation

Technical Modules:

Building Management and Control Systems
Design of Fluid Services and Heat Transfer Equipment
Building Services Design and Management

Special Features

There are several advantages in choosing the Brunel Building Services programme:

Award-winning courses: Building Services Engineering courses have been awarded the Happold Brilliant Award for teaching excellence by the Chartered Institution of Building Services Engineers.

Relevance: It is well established within the building services industry, with sponsors of students that include major design and contracting organisations, area health authorities, local authorities and the British Council, as well as several national governments.

Applicability: Emphasis on applications enables students and employers to benefit immediately from the skills and knowledge gained.

Responsiveness: Brunel's proximity to London, where large and innovative building developments have been taking place over the last decade, enables rapid infusion of new ideas and technological innovations into the programme content.

Excellent facilities
We have extensive and well-equipped laboratories, particular areas of strength being in fluid and biofluid mechanics, IC engines, vibrations, building service engineering, and structural testing. Our computing facilities are diverse and are readily available to all students. The University is fully networked with both Sun workstations and PCs. Advanced software is available for finite and boundary element modelling of structures, finite volume modelling of flows, and for the simulation of varied control systems, flow machines, combustion engines, suspensions, built environment, and other systems of interest to the research groups.

Collaborative research
Engineering at Brunel benefits from research collaboration with numerous outside organisations including major oil companies, vehicle manufacturers, and other leading industrial firms and governmental laboratories. We have links with at least six teaching hospitals and work with universities in China, Poland, Egypt, Turkey, Denmark, Japan, Brazil, Germany, Belgium, Greece, Italy and the US.

Women in Engineering and Computing Programme

Brunel’s Women in Engineering and Computing mentoring scheme provides our female students with invaluable help and support from their industry mentors.

Accreditation

This course is approved by the Chartered Institute of Building Services Engineers (CIBSE) and the Institution of Mechanical Engineers (IMechE) as appropriate additional academic study (further learning) for those seeking to become qualified to register as Chartered Engineers (CEng). Additioanlly we are seeking reaccreditation with the Energy Institute.

Teaching

Students are supplied with a study pack in the form of text books and CD-ROMs; you have assignments to submit and exams to sit each year. Examinations can be taken either at Brunel University or in the country you are resident in.
We have an extensive network of organisations (Universities, Colleges and British Council Offices) throughout the world who will provide invigilation services. The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Assessment

Each module is assessed either by formal examination, written assignments or a combination of the two. Cut-off dates for receipt of assignments are specified at the beginning of the academic year.
Examinations are normally taken in May. MSc dissertation project normally is carried out over four months (full-time students) or one year (distance learning students) and it is accessed by submission of an MSc dissertation.

Read less
This programme is aimed at graduates of building services engineering and other science and engineering disciplines who wish to extend their technical expertise in the field of building services engineering. Read more

This programme is aimed at graduates of building services engineering and other science and engineering disciplines who wish to extend their technical expertise in the field of building services engineering. With energy consumption within the design and operation of buildings becoming an ever increasingly important factor this programme is designed to combine building services engineering knowledge with specific energy considerations in their design.

The programme is accredited for further learning for CEng and professional membership by the Energy Institute and CIBSE. CIBSE has praised the programme as ‘one of the leading MSc courses of its kind in the UK’.

Key Facts

- An outstanding place to study. The School of Architecture, Building and Civil Engineering is ranked 1st in the UK for Building in the Times Good University Guide 2018. 

- Research-led teaching from international experts. 75% of the School’s research was rated as world-leading or internationally excellent in the latest Government Research Excellence Framework.

- The programme is accredited by the two main institutions representing energy and buildings – the Chartered Institution of Building Services Engineers and the Energy Institute. On successful completion of the course, students are deemed to meet the education requirements for both institutions and their applications can be endorsed by course tutors.

See the website http://www.lboro.ac.uk/study/postgraduate/programmes/departments/civil/low-energy-building-services/

Programme modules

Compulsory Modules:

- Thermodynamics, Heat Transfer & Fluid Flow [70% exam, 10 credits]

- Thermal Comfort & Indoor Air Quality [70% exam, 15 credits]

- Building Thermal Loads & Systems [70% exam, 15 credits]

- Building Energy Supply Systems [70% exam, 15 credits]

- Building Control & Commissioning [70% exam, 10 credits]

- Concept Design [0% exam, 15 credits]

- Low Carbon Building Design [50% exam, 15 credits]

- Advanced Thermal Modelling [50% exam, 15 credits]

- Research Project [0% exam, 60 credits]

- Research Methods in Building Performance [0% exam, 10 credits]

Facilities

All masters students have access to a wide range of building simulation codes which include commercial software, as well as bespoke codes developed in-house. Students can run these codes on their personal laptops or access any one of our computer laboratories, including access to our recently commissioned 2000-node high performance computer cluster.

One of our key strengths at Loughborough is our experimental facilities which enable us to validate computer models. Our masters students have access to a vast range of experimental facilities, some of which are used during the taught modules and all of which are available for use by students during their research dissertations.

How you will learn

You will learn through a carefully balanced combination of lectures, in-class guided workshops, hands-on computer modelling, field measurements and independent research. Students have access to a wide range of air flow and thermal modelling software as wells as extensive laboratory facilities. Following nine taught modules, students pursue a research dissertation of their choice which draws on the skills developed during the taught modules.

Students are assessed by a combination of traditional written exams, coursework and assignments. This split is typically 70/30 (exam/coursework) or 50/50, although some modules, such as research methods and concept design are assessed entirely based on coursework which comprises individual presentations and group work.

Scholarships

The University offers over 100 scholarships each year to new self-financing full-time international students who are permanently resident in a county outside the European Union. These Scholarships are to the value of 25% of the programme tuition fee and that value will be credited to the student’s tuition fee account.

You can apply for a scholarship once you have received an offer for a place on this programme.

Why choose civil engineering at Loughborough?

As one of four Royal Academy of Engineering designated Centres of Excellence in Sustainable Building Design, the School of Civil and Building Engineering is one of the largest of its type in the UK and holds together a thriving community of over 60 academic staff, 40 technical and clerical support staff and over 240 active researchers that include Fellows, Associates, Assistants, Engineers and Doctoral Students.

Our world-class teaching and research are integrated to support the technical and commercial needs of both industry and society. A key part of our ethos is our extensive links with industry resulting in our graduates being extremely sought after by industry and commerce world-wide,

- Postgraduate programmes

The School offers a focussed suite of post graduate programmes aligned to meet the needs of industry and fully accredited by the relevant professional institutions. Consequently, our record of graduate employment is second to none. Our programmes also have a long track record of delivering high quality, research-led education. Indeed, some of our programmes have been responding to the needs of industry and producing high quality graduates for over 40 years.

Currently, our suite of Masters programmes seeks to draw upon our cutting edge research and broad base knowledge of within the areas of contemporary construction management, project management, infrastructure management, building engineering, building modelling, building energy demand and waste and water engineering. The programmes are designed to respond to contemporary issues in the field such as sustainable construction, low carbon building, low energy services, project complexity, socio-technical systems and socio-economic concerns.

- Research

Drawing from our excellent record in attracting research funds (currently standing at over £19M), the focal point of the School is innovative, industry-relevant research. This continues to nurture and refresh our long history of working closely with industrial partners on novel collaborative research and informs our ongoing innovative teaching and extensive enterprise activities. This is further complemented by our outstanding record of doctoral supervision which has provided, on average, a PhD graduate from the School every two weeks.

- Career Prospects

Independent surveys continue to show that industry has the highest regard for our graduates. Over 98% (DLHE, 2016) were in employment and/or further study six months after graduating. Recent independent surveys of major employers have also consistently rated the School at the top nationally for civil engineering and construction graduates.

Find out how to apply here http://www.lboro.ac.uk/study/postgraduate/programmes/departments/civil/low-energy-building-services/



Read less
A dual pathway conversion course that gives STEM students the opportunity to gain the knowledge and skills needed for a career in building services engineering. Read more
A dual pathway conversion course that gives STEM students the opportunity to gain the knowledge and skills needed for a career in building services engineering.

Building services engineers are responsible for the mechanical and electrical systems that contribute to people's comfort, health and productivity. They provide analytic and design skills to buildings of all scales and levels of complexity, from residential and commercial, to industrial and cultural.

With greater efficiency constantly being sought in the use of energy and materials (for environmental and economic reasons) there is a growing demand for a new generation of environmentally responsible buildings. Currently however, the field of architecture and engineering is facing a deficit of people with the right type of expertise. In response, this full time Masters course has been created to provide a route through which STEM graduates (or people with relevant experience) can align their skills with the needs of the profession.

Course detail

The MSc Building Services Engineering is suitable for graduates with degrees in technological subjects (such as mechanical, aeronautical, civil and automotive engineering), or maths or science graduates. Graduates of the pure sciences will be recommended to enter the MSc course through the pathway offering some preparatory grounding in relevant technical subjects.

In developing the skills to practice as a building services professional, you will learn about the relevant technologies and methods of the discipline, and will be introduced to themes related to management and professional conduct within an engineering context.

Modules

Over the course of one year, you will study the following compulsory modules:

• Mechanical Services
• Construction Procurement
• Low Carbon Building Services
• Building Services Design Project
• Building Engineering Research
• Dissertation

Format

Input from industry practitioners as well as other interdisciplinary professionals is a key part of the course. Along with field trips to working sites, this will help you develop an understanding of how to apply the concepts and principles to real world situations and projects.

Through project work, group work, hands-on practice and theory, you will gain the skills needed to make a positive impact on the places where people live, study and work.

Much of the teaching will focus around a studio-based engineering design project under the guidance and critique of your tutor. There will also be traditional teacher-led classroom delivery supported by online materials.

Assessment

We use a range of assessment tools throughout the course, including exams, coursework, presentations, lab reports and portfolio development.

Careers / Further study

A career in building services engineering is likely to be varied, analytical and inventive. This Masters will equip you with the knowledge and experience needed to step into a wide range of roles, including Building Services Consulting Engineer, Mechanical Building Services Design Engineer, Sustainability Engineer and MEP Construction Engineer.

How to apply

Information on applications can be found at the following link: http://www1.uwe.ac.uk/study/applyingtouwebristol/postgraduateapplications.aspx

Funding

- New Postgraduate Master's loans for 2016/17 academic year –

The government are introducing a master’s loan scheme, whereby master’s students under 60 can access a loan of up to £10,000 as a contribution towards the cost of their study. This is part of the government’s long-term commitment to enhance support for postgraduate study.

Scholarships and other sources of funding are also available.

More information can be found here: http://www1.uwe.ac.uk/students/feesandfunding/fundingandscholarships/postgraduatefunding.aspx

Read less
Building Services Engineers design strategies and technology that make buildings work for us in today’s fast-paced, ecologically responsible and cost-driven construction industry. Read more
Building Services Engineers design strategies and technology that make buildings work for us in today’s fast-paced, ecologically responsible and cost-driven construction industry. It is an exciting, broad-based and challenging profession and the role is evolving and expanding today at an unprecedented rate.

Our Building Services Engineering Programme considers low carbon building design, passive and active strategies for efficiency and wellbeing, and the integration of renewable energy systems into buildings. It deals with services engineering issues, building the multidisciplinary skills required to cope with the challenges in services design and implementation which will be experienced in the working environment. As a conversion course, it provides students with the best foundation for launching or accelerating a career as a Building Services Engineer, or technical sustainability consultant. These are critical roles in interdisciplinary design teams, and as a consequence rank among the highest paid built environment professionals with rapid career advancement opportunities.

The scope of our programme has unprecedented flexibility inbuilt, to allow you to focus on areas of particular interest to you, and your career development, through your individual course choices.

Professional Development and Recognition

The programme meets the professional development needs as specified by the Engineering Council (ECUK) and relevant engineering institutions in the UK Standard for Professional Engineering Competence (UK-SPEC).

It allows graduates at either Diploma or MSc level to achieve a qualification equivalent to an MEng which will therefore gain professional recognition by the Chartered Institute of Building Services Engineers (CIBSE) and the Energy Institute (EI). The programme does this by providing:

• learning which contributes to the educational requirement for CEng;
• design tasks undertaken to an acceptable standard;
• development of transferable skills appropriate to professional practice.

Flexible Study Options

This programme can be studied full-time, part-time or via Independent Distance Learning (IDL), ideal for those in employment or with other commitments, providing flexible study options that fit around work or family. As an IDL student you will not be required to attend any lectures, tutorials or other events at any of Heriot-Watt University’s campuses, and you can also arrange to sit examinations in a location close to you.

Those who are close to our Dubai Campus will, in addition, benefit from our local support in the form of dissertation supervision and access to licensed software programmes and subscribed literatures, depending on availability.

Programme Content

Students undertake eight taught courses for the Diploma plus the research dissertation for the MSc. Students can opt to complete a total of four courses and graduate with the Heriot Watt University Postgraduate Certificate.

The taught element of the programme comprises 8 courses, with five core courses and three optional courses out of eight available alternatives:

Semester 1

• Building Electrical and Lighting Services (core)
• Ventilation and Air Conditioning (core)
• Contracts and Procurement (optional)
• Water Conservation (optional)
• Sustainable Design and Development (optional)
• Climate Change, Sustainability & Adaptation (optional)

Semester 2

• Thermofluids (core)
• Human Factors (core)
• Architectural Acoustics (optional)
• People and Organisational Management for the Built Environment (optional)
• Energy Systems and Buildings (optional)
• Carbon Footprinting (optional)
• Low Carbon Buildings (core)

English language requirements

If English is not the applicant’s first language a minimum of IELTS 6.5 or equivalent is required with all elements passed at 6.0 or above.

Applicants who have previously successfully completed programmes delivered in the medium of English language may be considered and will be required to provide documentary evidence of this. Examples would be secondary school education or undergraduate degree programme. A minimum of at least one year of full time study (or equivalent) in the medium of English language will be required.

We offer a range of English language courses to help you meet the English language requirement prior to starting your masters programme, please visit: http://www.hw.ac.uk/study/english.htm

Read less
The world is recognising that buildings need to consume less energy in the future – and this course develops your building services engineering knowledge with a focus on sustainable design. Read more

About the course

The world is recognising that buildings need to consume less energy in the future – and this course develops your building services engineering knowledge with a focus on sustainable design.

You will learn about renewable energy technologies, efficient ventilation, air conditioning and energy conversion technologies in the programme, and can choose from a broad range of dissertation topics.

The course is available on either a one-year, full-time or three-to-five-year, distance-learning basis.

Aims

The era of zero emission building is within grasping distance of the mass construction industry – creating a huge demand for specialists with the skills to design and project manage effectively.

The aim of this programme is to respond to the worldwide demand for building services engineers and managers who have a sound knowledge of engineering principles and the ability to apply this knowledge to the complex situations prevailing within the building services industry.

Course Content

Modes of Study

1-Year Full-Time
The taught element of the course (September to April) includes seven modules; delivery will be by a combination of lectures, tutorials and group/seminar work. A further four months (May to September) is spent undertaking the dissertation.

3-to-5-Years Distance-Learning
The distance learning programme is designed to enable you to conduct most of your studies at home, in your own time and at your own pace.

There is no requirement to attend lectures at Brunel University and there is no set timetable of lectures, instead you follow a structured programme of self-study at home or at work. This gives you the freedom to arrange a work programme to suit yourself and you should usually allow about twelve hours each week for study.

There are set submission dates for assignments but we have tried to design the programme so that they are well-spaced, giving you the maximum flexibility in your study plans.

You can take between three and five years to complete the course. The average is three years, with students taking four modules in the first year, four modules in the second year and the dissertation in the third year. However, depending on your other commitments you can take longer up to a maximum of five years.

You are supplied with a study pack in the form of textbooks and CD-ROMs; you have assignments to submit and exams to sit each year.
Examinations can be taken either at Brunel University or in the country you are resident in. We have an extensive network of organisations (universities, colleges and British Council offices) throughout the world who will provide invigilation services.

The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Typical Modules

Building Heat Transfer and Air Conditioning
Electrical Services and Lighting Design
Acoustics, Fire, Lifts and Drainage
Energy Conversion Technologies
Building Services Design and Management
Renewable Energy Technologies
Energy Efficient Ventilation for Buildings
Dissertation

Special Features

There are numerous advantages in choosing the Brunel Building Services programme:

Award-winning courses: Building Services Engineering courses have been awarded the Happold Brilliant Award for teaching excellence by the Chartered Institution of Building Services Engineers.

Relevance: It is well established within the building services industry, with sponsors of students that include major design and contracting organisations, area health authorities, local authorities and the British Council, as well as several national governments.

Applicability: Emphasis on applications enables students and employers to benefit immediately from the skills and knowledge gained.

Responsiveness: Brunel's proximity to London, where large and innovative building developments have been taking place over the last decade, enables rapid infusion of new ideas and technological innovations into the programme content.

Excellent facilities
We have extensive and well-equipped laboratories, particular areas of strength being in fluid and biofluid mechanics, IC engines, vibrations, building service engineering, and structural testing. Our computing facilities are diverse and are readily available to all students. The University is fully networked with both Sun workstations and PCs. Advanced software is available for finite and boundary element modelling of structures, finite volume modelling of flows, and for the simulation of varied control systems, flow machines, combustion engines, suspensions, built environment, and other systems of interest to the research groups.

Collaborative research
Engineering at Brunel benefits from research collaboration with numerous outside organisations including major oil companies, vehicle manufacturers, and other leading industrial firms and governmental laboratories. We have links with at least six teaching hospitals and work with universities in China, Poland, Egypt, Turkey, Denmark, Japan, Brazil, Germany, Belgium, Greece, Italy and the US.

Women in Engineering and Computing Programme

Brunel’s Women in Engineering and Computing mentoring scheme provides our female students with invaluable help and support from their industry mentors.

Accreditation

This course is approved by the Chartered Institute of Building Services Engineers (CIBSE) and the Institution of Mechanical Engineers (IMechE) as appropriate additional academic study (further learning) for those seeking to become qualified to register as Chartered Engineers (CEng). Additionally we are seeking reaccreditation with the Energy Institute.

Teaching

Students are supplied with a study pack in the form of textbooks and CD-ROMs; you have assignments to submit and exams to sit each year. Examinations can be taken either at Brunel University or in the country you are resident in.
We have an extensive network of organisations (Universities, Colleges and British Council Offices) throughout the world who will provide invigilation services. The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Assessment

Each module is assessed either by formal examination, written assignments or a combination of the two. Cut-off dates for receipt of assignments are specified at the beginning of each stage. Examinations are normally taken in May/June.
Successful completion of the taught modules allows the student to proceed to the dissertation stage. To qualify for the award of the MSc degree, the student must submit a satisfactory dissertation.

Read less
Beautiful architecture. Solid structure. What else do buildings need?. Try living in one without any heating, cooling, electrical power, lighting, water or drainage. Read more
Beautiful architecture. Solid structure. What else do buildings need?

Try living in one without any heating, cooling, electrical power, lighting, water or drainage. What would it be like to work in a tower without lifts? How would you manage without telephones, an IT system or an internet connection? All of these systems and many more are designed by building services engineers. Building Service Engineers turn buildings from empty shells into spaces fit for people to use.

From the very start of the building design, Building Services Engineers are involved helping architects and other members of the design team to get the size, shape and configuration of the building right. They determine strategies for designing energy efficient buildings, making them sustainable in the long term. Buildings are responsible for a large chunk of carbon emissions so this work makes a critical contribution to reducing a building's impact on climate change.

Of all the disciplines working in the built environment today, the building services engineer has the broadest reach and the deepest impact, affecting virtually every aspect of building design. In short, they make buildings work.

This Masters course provides a broad basis of advanced understanding in the technological areas of building services and energy engineering, with particular emphasis on those areas that are relevant to the interaction between the built and natural environments, modern industry, and the analysis of developing technologies.

Modules

The course provides a practitioner perspective with which we analyse building energy requirements in terms of the external environment and internal space, and the effect on energy resources. We consider the principles and analyse associated building engineering systems to understand control, simulation and modelling techniques.

As well as the core engineering skills, appropriate areas of management and research methods are studied to provide a balance foundation for the specialist units. The MSc dissertation provides an opportunity to develop further research skills by application to problems that require in-depth and innovative thinking.

Modules taught on this course include:

Thermal environment, acoustics and lighting
Heating and energy in buildings
Energy resource and use analysis
Electrical power
Sustainable refrigeration
Ventilation and air conditioning
Energy engineering project

Timetable

Full-time timetable: 2 days per week
Part-time day release timetable: 1 day per week

Accreditation

This course is accredited by the Chartered Institution of Building Services Engineers (CIBSE) and the Energy Institute as masters further learning to meet the academic requirements of becoming a Chartered Engineer (with a suitable first degree). The course is accredited on behalf of the Engineering Council as meeting the requirements for Further Learning for registration as a Chartered Engineer.

Expertise

The course is based in what was formerly the National College for Heating Ventilation and Refrigeration Engineering as well as Centre for Energy Studies, and maintains extremely strong links with all areas of the associated industries. Many of the leaders in energy and building services engineering fields are former LSBU students, lending much support in guidance and industrial collaboration, placement and employment.

Employability

Employment prospects are excellent. Construction and engineering activity is expected to accelerate in the UK, Europe and worldwide over the next 20 years and demand for building services engineers continues to outstrip supply.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

• Direct engagement from employers who come in to interview and talk to students
• Job Shop and on-campus recruitment agencies to help your job search
• Mentoring and work shadowing schemes.

Read less
If your aim is to become a chartered building services engineer we will give you the experience and knowledge - subject to accreditation approval from the Chartered Institution of Building Services Engineers - to achieve your goal. Read more
If your aim is to become a chartered building services engineer we will give you the experience and knowledge - subject to accreditation approval from the Chartered Institution of Building Services Engineers - to achieve your goal. Whether you've graduated from our BSc (Hons) course, or already work in industry as an associate engineer, we will equip you with the ability to play a leading role in the design, installation and management of building services.

The digital age has revolutionised how engineers operate - gone are the days when you could work with calculators, paper and design chart. To meet the demands of this changing industry we've invested heavily in industry standard software to which you'll have access to develop your expertise.

Sustainability and the carbon reduction of buildings is a key issue internationally. We will teach you how to implement this outlook in your work, from energy usage on site, emissions control, and your knowledge of environmental science, to the latest systems and innovation in energy conservation.

We'll improve your technical engineering capabilities so that you can take responsibility for building services and mechanical installations. You'll also focus on areas such as project leadership and management, lighting design, heating, thermal comfort, air conditioning, cooling systems, acoustic comfort and electrical services.

- Research Excellence Framework 2014: our University's results for the Architecture, Built Environment and Planning unit, which it entered for the first time, were impressive with 37% of its research being rated world leading or internationally excellent.

Visit the website http://courses.leedsbeckett.ac.uk/buildingengineering_msc

Mature Applicants

Our University welcomes applications from mature applicants who demonstrate academic potential. We usually require some evidence of recent academic study, for example completion of an access course, however recent relevant work experience may also be considered. Please note that for some of our professional courses all applicants will need to meet the specified entry criteria and in these cases work experience cannot be considered in lieu.

If you wish to apply through this route you should refer to our University Recognition of Prior Learning policy that is available on our website (http://www.leedsbeckett.ac.uk/studenthub/recognition-of-prior-learning.htm).

Please note that all applicants to our University are required to meet our standard English language requirement of GCSE grade C or equivalent, variations to this will be listed on the individual course entry requirements.

Careers

The global outlook of our course content will help you impress many UK companies, who will expect their employees to work for clients around the world. Subject to your accreditation as a chartered engineer - you will be qualified to take responsibility for making key decisions in the industry. We are seeking accreditation from the Chartered Institution of Building Services Engineers from 2015.

- Mechanical Design Engineer
- Building Services Engineer
- Facilities Manager
- Sustainability Engineer

Careers advice:
Visit the careers site - https://www.leedsbeckett.ac.uk/employability/jobs-careers-support.htm

Course Benefits

By 2016 public sector projects over the value of £5,000,000 have to be BIM (Building Information Management) enabled and can no longer comprise of a paper based design - our course gives you the chance to keep pace with an evolving industry.

You'll have the opportunity to use building information modelling that includes packages such as Revit, Tekla and Vico, with a strong emphasis in design that meets environmental constraints.

You'll be taught by staff who are practicing engineers and who will give you a global stance on building services engineering, drawing international comparisons with systems and operational solutions from around the world.

Modules

Masters Final Project / Dissertation & Research Skills (60 Credits)
This is an opportunity to engage in research or advanced scholarship in a subject area that is appropriate to the course and of particular interest to you.

Project Management (20 Credits)
Examine the role of a project manager in the co-ordination of a range of professional skills required in the development and implementation of complex projects to satisfy client objectives.

Sustainable Buildings (20 Credits)
Extend and deepen your knowledge of building and system performance in resolution of carbon reduction and achieving long term sustainability. This focus relates to both the design of the building fabric, the operation of the building and its usage.

BIM & MEP (20 Credits)

WBL - Developing Engineering Portfolios & Study Methods (20 Credits)
Based upon the Engineering Gateways work based tool kit you will be introduced to the requirements for an engineering pathway and uses work based tools and skills as a means of developing that approach.

BEM & Intelligent Buildings (20 Credits)

Sustainable Systems Design (20 Credits)
Review current trends in building services systems design, focusing upon design approaches, sustainability considerations, electrical systems and lighting design.

Professor Mohammad Dastbaz

Dean, Faculty of Arts, Environment and Technology

"We aim to provide innovation in curriculum, engagement with current industry practices and standards, and to give our students the experience of working with staff whose research has national and international reputation."

Mohammad is responsible for the strategic leadership of the Faculty of Arts, Environment and Technology,having joined our University in June 2011 from the University of East London. A well published researcher, with over 50 refereed conference and Journal publications, his research profile includes many funded research programmes including JISC and EU FP7 projects. Mohammad’s first degree was in Electrical and Electronic Engineering. He then went on to complete a PhD in the 'Design, Development and Evaluation of Multimedia Based Learning Systems' at Kingston University. In 1989 he set up one of the UK's first multimedia PC companies, 'Systems 2000'.

Facilities

- Library
Our Library is one of the only university libraries in the UK open 24/7 every day of the year. However you like to study, our Library has you covered with group study, silent study, extensive e-learning resources and PC suites.

- Broadcasting Place
Broadcasting Place provides students with creative and contemporary learning environments, is packed with the latest technology and is a focal point for new and innovative thinking in the city.

Find out how to apply here - http://www.leedsbeckett.ac.uk/postgraduate/how-to-apply/

Read less
This Master's degree is designed for students who wish to practice across a broad range environmental engineering and apply new sustainable risk management strategies for complex environmental problems. Read more
This Master's degree is designed for students who wish to practice across a broad range environmental engineering and apply new sustainable risk management strategies for complex environmental problems. Water, Waste and Environmental Engineering has been traditionally referred to as public health engineering in the United Kingdom. In this postgraduate course, the technical aspects of both natural and engineering environmental systems will be covered. There will be broad interdisciplinary subjects synthesizing knowledge from a wide spectrum of science and engineering, expanding the content of public health engineering, which in the UK has traditionally been responsible for developing the infrastructure for managing water and waste.

Students will develop engineering skills and be able to design, develop and apply concepts for water and waste as a resource based on environmental sensitivity and be competent in planning, modelling, design, construction, operations, maintenance and control of both engineered and natural water and earth resources.

Students who select this postgraduate programme will gain a skill set that will enable them to progress in the fields of:

- Environmental engineering
- Desalination and water reuse
- Water resources engineering
- Hydraulics and hydrology
- Environmental fluid hydraulics
- Environmental remediation
- Waste management
- Other specialities valued in both the private and public sectors.

The MSc in Water, Waste and Environmental Engineering will incorporate solid waste management, contaminated land treatment and the use of geographic information systems (GIS) with emphasis on management of the earth's resources.

The programme will explain the relationship between different earth resources including hydrosystems, both 'engineered' - hydro-power plants, water/wastewater treatment plants, sewers - and 'natural' - rivers, lakes, wetlands, irrigation districts, reservoirs etc., solid wastes, brownfield land, and geo-derived primary resources and their sustainable management.

The aims of the programme are:

- To show you how to design, implement and manage sustainable, risk-reduced eco-friendly solutions for reducing the environmental impact of exploitation of earth's resources in the context of environmental engineering-related issues facing global societies

- To provide you with the skills to further your careers in these areas

- To support you in understanding the innovative and pioneering approaches in this field and to be able to apply them to the solution of real-world problems in developing novel industrially-relevant solutions.

Visit the website http://www2.gre.ac.uk/study/courses/pg/enggen/wwee

What you'll study

Full time
- Year 1:
Students are required to study the following compulsory courses.

Environmental Engineering and Sustainability (15 credits)
Hydrosystems Engineering and Management (15 credits)
Individual Research Project for Civil and Environmental Engineering (60 credits)
Information Technologies for Environmental Engineering (15 credits)
Research, Planning and Communication (15 credits)
Waste Management and Remediation Technology (15 credits)
Desalination and Water Reuse (15 credits)
Water and Sanitation for Developing Countries (15 credits)
Water and Wastewater Engineering (15 credits)

Part time
- Year 1:
Students are required to study the following compulsory courses.

Environmental Engineering and Sustainability (15 credits)
Information Technologies for Environmental Engineering (15 credits)
Waste Management and Remediation Technology (15 credits)
Desalination and Water Reuse (15 credits)

-Year 2:
Students are required to study the following compulsory courses.

Hydrosystems Engineering and Management (15 credits)
Individual Research Project for Civil and Environmental Engineering (60 credits)
Research, Planning and Communication (15 credits)
Water and Sanitation for Developing Countries (15 credits)
Water and Wastewater Engineering (15 credits)

Fees and finance

Your time at university should be enjoyable and rewarding, and it is important that it is not spoilt by unnecessary financial worries. We recommend that you spend time planning your finances, both before coming to university and while you are here. We can offer advice on living costs and budgeting, as well as on awards, allowances and loans.

Teaching and learning

The number of contact hours (e.g. lectures, seminars and feedback on assignments) per module/course ranges from 50-75 hours for the one year full time programme or roughly equivalent to four hours per week per module. The expected self-study time is approximately 80-90 hours per module per year (roughly equivalent to four hours per week per module).

You will be taught by academics with a range of industrial and academia experience for each module.

Assessment

Project work, assignments and laboratory exercises in addition to substantial written examination of course materials will occur in most modules. The Environmental Engineering Research Project will require submission of a substantial final report/dissertation. Assessment of this module will involve participation in a poster and seminar presentation and a final oral examination.

Professional recognition

Accreditation will be sought from the Chartered Institution of Water and Environmental Management (CIWEM) and The Joint Board of Moderators (JBM) including the Institution of Civil Engineers, The Institution of Structural Engineers, the Chartered Institution of Highways and Transportation and Institute of Highway Engineers.

Career options

Postgraduate students from this programme will find such employment opportunities as engineers, scientist and technical managers in the private sector (engineering design firms, engineering consultancy, project management, risk management and waste management), in the public sector (environmental protection engineering, regulations and standards, local government) and in non-governmental sectors (NGOs, environmental advocacy) or may wish to pursue further qualifications such as a PhD within the Faculty of Engineering and Science at the University of Greenwich to become even more specialised. Employers of environmental engineers include engineering consultancies (such as AECOM, Atkins, Mott MacDonald Group, Hyder), government agencies (such as Environment Agency, Scottish Environment Protection Agency) and NGOs (such as Oxfam, Engineers without Boarders, Water Aid).

Careers and employability

FACULTY OF ENGINEERING & SCIENCE
We work with employers to ensure our degrees provide students with the skills and knowledge they need to succeed in the world of work. They also provide a range of work experience opportunities for undergraduates in areas such as civil engineering, manufacturing and business information technology.

Students also benefit from the services provided by the university’s Guidance and Employability Team, including ‘JobShop’, mentoring, volunteering and the student ambassador scheme.

Find out how to apply here - http://www2.gre.ac.uk/study/apply

Read less
Why this course?. Civil engineering develops and improves facilities and services that society needs – from the supply of clean water and energy to the design and construction of roads, railways and stations. Read more

Why this course?

Civil engineering develops and improves facilities and services that society needs – from the supply of clean water and energy to the design and construction of roads, railways and stations. Solving problems of air, land and water pollution and protecting society against natural disasters are also important aspects of civil engineering.

Engineering graduates are in high demand from recruiting companies worldwide.

This 18-month MSc course has been designed to meet the needs of a broad range of engineering industries. As a Masters student, you’ll gain the specialist and generic skills necessary to lead future developments, with practical experience provided by the industrial placement.

The course has a significant design element based on the most up-to-date specialist design guidelines. This includes a major design project that integrates acquired knowledge and acts as a platform for structured self-learning.

This MSc in Civil Engineering with Industrial Placement is suitable for graduates with a background in any discipline of civil engineering. Applicants with a degree in environmental engineering, earth science, mathematics, physics and mechanical engineering may also be considered.

The MSc in Civil Engineering with Industrial Placement has three optional specialist streams:

- Structural Engineering & Project Management

- Geotechnical Engineering & Project Management

- Geoenvironmental Engineering & Project Management

- Civil Engineering with Water Engineering & Project Management

See the website https://www.strath.ac.uk/courses/postgraduatetaught/civilengineeringwithindustrialplacement/

Industrial placement

A wide range of companies, such as AECOM, ATKINS, CAPITA, CH2M HILL and ClimateXChange (Scotland’s Centre of Expertise on Climate Change), are offering placements exclusively for this MSc. A full list of companies can be provided upon request. The 8 to 12 weeks industrial placement will take place in the period from June to September.

You’ll study

You'll take the compulsory module Civil Engineering Design Projects. This module gives you the opportunity to work on real projects. You can choose between a renewable energy project or an industrial project. You’ll develop comprehensive and innovative designs that involve structural engineering, geotechnical engineering and water engineering, management, environmental and financial planning.

In additional to the industrial placement you'll also take the compulsory module Research Protocols for Science & Engineering which supports the dissertation project. You also have a wide choice of optional modules.

Following successful completion of the taught component, you’ll undertake a dissertation. If you’re on one of the specialist streams you’ll undertake a research project on a topic related to that stream. The dissertation can be linked to the industrial placement and worked on together with the industrial partner.

Facilities

In the Department of Civil & Environmental Engineering we’ve invested £6million in state-of-the-art laboratories which cover core areas of activity including:

- geomechanics

- microbiology

- analytical chemistry

- structural design

- Field investigation

We’re equipped with:

- nanoseismic systems for monitoring the mechanical evolution of soil and rock masses

- Electrical Resistivity Tomography systems to detect clay fissuring and ground water flow in earth-structures

- dielectric permittivity-based sensors to monitor water flow in the sub-surface environment

- Geomechanics Laboratory

We’re equipped with state-of-the art technologies for testing multiphase (unsaturated) porous geomaterials. These include:

- suction-controlled double-wall triaxial cells

pressure plates

- triaxial cells equipped with bender elements for dynamic testing

- image analysis unit to monitor soil specimen deformation

- instruments for measurement of pore-water tensile stress

- Mercury Intrusion Porosimeter and SEM for microstructure investigation

- Software and numerical modelling

You’ll have access to a wide range of software packages relevant to civil and geotechnical engineering applications, including:

- GEOSTUDIO suite (Slope, Seep, Sigma, Quake, Temp, CTran, Air and Vadose)

- ABAQUS finite element packages

- Ansys

- Autodesk Civil 3D

- Limit State

- Strand 7

- Talren 4

Accreditation

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a partial CEng accredited undergraduate first degree.

Additional requirements

For candidates whose first language is not English, minimum standards of English proficiency are an IELTS score of 6.5. Applicants with slightly lower scores have the opportunity to attend the University's Pre-Sessional English classes to bring them up to the required level. Some exceptions to the above may apply to nationals of UKBA-approved Majority English Speaking countries.

Pre-Masters preparation course

The Pre-Masters Programme is a preparation course for international students (non EU/UK) who do not meet the entry requirements for a Masters degree at the University of Strathclyde. The Pre-Masters programme provides progression to a number of degree options

To find out more about the courses and opportunities on offer visit isc.strath.ac.uk or call today on +44 (0) 1273 339333 and discuss your education future. You can also complete the online application form. To ask a question please fill in the enquiry form and talk to one of our multi-lingual Student Enrolment Advisers today.

Learning & teaching

Some classes involve fieldtrips and/or lab work. For fieldtrips, you need to wear warm clothing, waterproof jacket/trousers and sturdy shoes/boots (e.g. hiking boots or non-slip wellington boots).

For lab work, you’ll need a lab coat. At the start of your course you’ll attend a two-day induction welcoming you to the department

Careers

High-calibre civil engineers are in demand throughout the world. As a graduate you'll have many different career options including:

- engineering consultancies, where the work normally involves planning and designing projects

- contractors, where you’ll be managing and overseeing works on-site

- working for utilities or local authorities

- working for large companies such as those within oil production, mining and power generation

How much will I earn?

As a contracting civil engineer the average graduate starting salary is around £23,500. With five years' experience this could rise to £28,523*.

*Information is intended only as a guide.

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/index.jsp



Read less
The modern society relies on the work of Chemical Engineers who develop and design the processes that make the useful products for the society by efficient use and management of resources including water and energy while controlling health and safety procedures and protecting the environment. Read more
The modern society relies on the work of Chemical Engineers who develop and design the processes that make the useful products for the society by efficient use and management of resources including water and energy while controlling health and safety procedures and protecting the environment.

Chemical Engineering provides essential tools based on the concept of sustainability and low carbon footprint for changing raw materials into useful products in a safe and cost effective way. Chemical Engineers understand how to alter the chemical, biochemical or physical state of a substance, to create everything from health care products (face creams, shampoo, perfume, drugs) to food (dairy products, cereals, agro-chemicals) and water (desalination for freshwater) to energy (petroleum to nuclear fuels).

Your study at MSc level at Bradford will be a foundation for life aimed at developing a deep understanding of advanced technical principles, analytical tools, and competence in their application together with a wide range of management, personal and professional skills. The course will provide you with essential tools based on the concept of sustainability and low carbon footprint for changing raw materials into useful products in a safe and cost effective way.

Why Bradford?

Flexibility of career path – Choice of three routes:
-Chemical Engineering - advanced chemical engineering and process technology skills for exciting and challenging careers in chemical and process industries
-Petroleum Engineering -matches the needs in different areas of oil and gas production and in medium/small operating and consulting companies
-Polymer Engineering - design and operation of processes to engineer materials with advanced properties leading to careers in diverse manufacturing sectors

Research Strengths - Internationally acclaimed research activities in the following areas:
-Chemical and Petrochemical Engineering
-Polymers
-Energy
-Water
-Pharmaceutical engineering
-Coating and advanced materials engineering

Rankings

Top Five: Chemical Engineering at the University of Bradford is ranked 5th in the UK in the Guardian University League Table 2017/

[[Modules
MSc Chemical & Petroleum Engineering (Chemical Engineering Background)
-Desalination Technology
-Materials & Manufacturing Processes
-Transport Phenomena
-Design Optimisation
-Computational Fluid Dynamics
-Upstream Production & Refinery Operations
-Research Skills
-Food & Pharmaceutical Processes Engineering
-Polymer Engineering
-Risk Management
-Engineering Computational Methods
-MSc Project

MSc Chemical & Petroleum Engineering (non-Chemical Engineering Background)
-Desalination Technology
-Transport Phenomena
-Chemical Engineering Practice
-Material & Manufacturing Processes
-Design Optimisation
-Computational Fluid Dynamics
-Upstream Production & Refinery Operations
-Research Skills
-Food & Pharmaceutical Processes Engineering
-Polymer Engineering
-Risk Management
-Engineering Computational Methods
-MSc Project

Career support and prospects

The University is committed to helping students develop and enhance employability and this is an integral part of many programmes. Specialist support is available throughout the course from Career and Employability Services including help to find part-time work while studying, placements, vacation work and graduate vacancies. Students are encouraged to access this support at an early stage and to use the extensive resources on the Careers website.

Discussing options with specialist advisers helps to clarify plans through exploring options and refining skills of job-hunting. In most of our programmes there is direct input by Career Development Advisers into the curriculum or through specially arranged workshops.

Read less
The MSc in Geotechnical Engineering is part of the Division of Civil Engineering's extensive programme of postgraduate studies and research. Read more
The MSc in Geotechnical Engineering is part of the Division of Civil Engineering's extensive programme of postgraduate studies and research. The course builds on the Division's renowned research expertise and industrial experience in current aspects of geotechnical engineering.

Why study Geotechnical Engineering at Dundee?

Key reasons include:
Better preparation for successful careers in industry, commerce or academia
Development of skills, knowledge and understanding in a specialist field
Participation in the research activities of a world-class department

A wide range of research projects are available in any of the following areas: earthquake engineering (foundations during earthquakes, liquefaction, faulting), offshore engineering (foundations, anchors, pipelines and offshore processes), foundation engineering and ground improvement. Some of these projects will be linked to industry

Development of transferable skills in research methods, communication and management of large and small scale projects

Part-time students have the option of relating their research project directly to ongoing work within their employment

Professional Accreditation: ICE/IStructE

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. Visit http://www.jbm.org.uk for further information.

What's great about Geotechnical Engineering at Dundee?

Civil Engineering at Dundee is ranked top in Scotland for research. You will have the opportunity to engage with leading edge research at Dundee, meaning we attract students of the highest calibre and our graduates are highly sought after by employers worldwide. Students studying on our masters programmes benefit from our renowned research expertise and industry experience.

The Geotechnical Engineering research sub-group was established in 1997 and it has grown significantly since that time. In addition to its undergraduate and postgraduate teaching and research activities, the group offers services to industry across a broad range of geotechnical engineering. The group has hosted a number of major conferences and symposia in Dundee.

Who should study this course?

It is designed both for people pursuing a higher degree soon or immediately after obtaining their first degree, and for those with considerable work experience.

"I love how specialised [this course] is, as very few universities offer such speciality in Earthquake and Offshore Engineering. The course taught me how to solve real-life challenging problems, not to mention the strong industry linkage with my future employer - Subsea 7."
Vithiea Pang, MSc student

The start date is September each year, and lasts for 12 months.

How you will be taught

Modules start at the beginning of the academic session in September and are taught by lectures and tutorials.

What you will study

There are three main elements to the course programme:

Core Modules
These provide skills generic to engineering and research. The two modules are:

Research Methods and Diploma Project
Health, Safety & Environmental Engineering
Specialist Modules
The specialist modules provide in-depth and advanced knowledge, and build upon our expertise. These cover the following topics:

Offshore Geotechnical Engineering
Advanced Soil Mechanics and Geo-Environmental Engineering
Soil Dynamics and Earthquake Engineering
Advanced Structural Analysis
Research Project
The research project gives you the opportunity to benefit from, and contribute to our research. At the end of the project students submit a dissertation based on their research. Students select their projects from a list offered by the academic staff or may suggest their own topic. Many of these projects are collaborative with industry, particularly those in offshore engineering (for Oil and Gas, Marine Renewables and Aquaculture)

How you will be assessed

The course is assessed by coursework and examination.

Students taking the Postgraduate Diploma carry out a shorter research project and complete an extended report.

Careers

There is a continuing demand for civil engineers particularly in the energy and water sectors and the skills of the civil engineer are highly portable in the multi-disciplinary engineering sectors. The latest Institution of Civil Engineers Salary Survey for the UK (2010) indicates that the average total income of its senior members is nearly £100k, while that of recent graduates is £27.5k.

We are proud of our achievements in graduate employment. The blend of science, technology and management education and training gained in a unique learning environment that is both challenging and friendly, makes our graduates attractive to employers in civil engineering and a wider range of sectors.

Graduates from Dundee have gone on to achieve high level positions in most sectors of the profession. These include consulting engineers and contractors, the offshore industry and research organisations.

Funded places

Due to an initiative from the Scottish Funding Council (SFC) designed to support key sectors in the Scottish economy, there are 7 fully-funded places available to eligible students starting this course in 2013/14. This covers all tuition fees associated with the MSc programme and can be held by students classified as Scottish or EU for fee purposes only. Please indicate your interest in being considered for a funded place when you apply through UKPASS.

Read less
The objective of this programme of study is to prepare professionals able to deal with complex systems using sophisticated mathematical tools, yet with an engineering attitude. Read more

Mission and goals

The objective of this programme of study is to prepare professionals able to deal with complex systems using sophisticated mathematical tools, yet with an engineering attitude. It harmonises a solid scientific background with a command of advanced methodologies and technologies. The programme is characterised by a continuous synergy between Applied Mathematics and Engineering disciplines- The students may choose among three specialisations:
- Computational Science and Engineering
- Applied Statistics
- Quantitative Finance

See the website http://www.polinternational.polimi.it/educational-offer/laurea-magistrale-equivalent-to-master-of-science-programmes/mathematical-engineering/

Career opportunities

The professional opportunities offered by this course are rather ample and varied: engineering consultancy companies that deal with complex computational problems; manufacturing or civil engineering companies where analyses based on the use of advanced mathematical tools are needed; banks, insurance companies and financial institutions making use of quantitative finance for risk analysis or forecast; companies that require statistical interpretation and the processing of complex data, or the simulation of different scenarios; public and private research institutes and laboratories.

Eligible students

Students holding a Bachelor degree in Mathematical Engineering, or in a related area with a solid background in the core disciplines of the programme, i.e. Applied Mathematics, Computer Science, Applied Physics or other Engineering disciplines are eligible for application. In particular, eligible students' past studies must include courses in different areas of Engineering (among Informatics, Economics & Business Organization, Electrotechnics, Automation, Electronics, Applied Physics, Civil Engineering) for at least 25% of the overall courses, as well as courses in different areas of Mathematics (Mathematical Analysis, Linear Algebra, Geometry, Probability, Statistics, Numerical Analysis, Optimization) for at least 33% of the overall courses.
The following tracks are available:
1. Computational Science and Engineering
2. Applied Statistics
3. Quantitative Finance

Eligible students must clearly specify the track they are applying for in their motivation letter.

Presentation

See http://www.polinternational.polimi.it/uploads/media/Mathematical_Engineering.pdf
The Master of Science in Mathematical Engineering (MSME) aims to form an innovative and flexible professional profile, endowed with a wide spectrum of basic scientific notions and engineering principles, together with a deep knowledge of modern pure and applied mathematical techniques. MSME is characterized by a continuous synergy between Mathematics and Engineering methods, oriented to the modelling, analysis and solution of complex planning, control and management problems, and provides the students with the possibility to face problems from various scientific, financial and/or technological areas. The MSME graduates can find employment in Engineering companies specialized in handling complex computational problems, requiring a multidisciplinary knowledge; in companies manufacturing industrial goods for which design analysis based on the use of advanced mathematical procedures are required; in service societies, banks, insurance companies, finance or consultant agencies for the statistical interpretation and the simulation of complex situations related to the analysis of large number of data (e.g. management and optimization of services, data mining, information retrieval) or for handling financial products and risk management; in public and private institutions. The programme is taught in English.

Subjects

Three main tracks available:
1. Computational Science for Engineering
Real and functional analysis; algorithms and parallel programming; numerical and theoretical analysis for partial differential equations; fluid mechanics; computational fluid dynamics advanced programming techniques for scientific computing;

2. Statistics
Real and functional analysis; algorithms and parallel programming; stochastic dynamical models; applied statistics, model identification and data analysis; Bayesian statistics

3. Mathematical Finance
Real and functional analysis; algorithms and parallel programming; stochastic differential equations; mathematical finance; financial engineering; model identification and data analysis.

In the motivation letter the student must clearly specify the track he/she is applying for.

See the website http://www.polinternational.polimi.it/educational-offer/laurea-magistrale-equivalent-to-master-of-science-programmes/mathematical-engineering/

For contact information see here http://www.polinternational.polimi.it/educational-offer/laurea-magistrale-equivalent-to-master-of-science-programmes/mathematical-engineering/

Find out how to apply here http://www.polinternational.polimi.it/how-to-apply/

Read less

Show 10 15 30 per page



Cookie Policy    X