• Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of York Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Imperial College London Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Regent’s University London Featured Masters Courses
De Montfort University Featured Masters Courses
Cardiff University Featured Masters Courses
University of Leeds Featured Masters Courses
Southampton Solent University Featured Masters Courses
Aberdeen University Featured Masters Courses
"process" AND "optimisati…×
0 miles

Masters Degrees (Process Optimisation)

  • "process" AND "optimisation" ×
  • clear all
Showing 1 to 15 of 78
Order by 
The MSc in Advanced Process Integration and Design started in the Department of Chemical Engineering (UMIST) over twenty years ago. Read more
The MSc in Advanced Process Integration and Design started in the Department of Chemical Engineering (UMIST) over twenty years ago. The programme was a result of emerging research from the Centre for Process Integration, initially focused on energy efficiency, but expanded to include efficient use of raw materials and emissions reduction. Much of the content of the course stems from research related to energy production, including oil and gas processing.

The MSc in Advanced Process Integration and Design aims to enable students with a prior qualification in chemical engineering to acquire a deep and systematic conceptual understanding of the principles of process design and integration in relation to the petroleum, gas and chemicals sectors of the process industries.

Overview of course structure and content
In the first trimester, all students take course units on energy systems, utility systems and computer aided process design. Energy Systems develops systematic methods for designing heat recovery systems, while Utility Systems focuses on provision of heat and power in the process industries. Computer Aided Process Design develops skills for modelling and optimisation of chemical processes.

In the second trimester, the students choose three elective units from a range covering reaction systems, distillation systems, distributed and renewable energy systems, biorefining, and oil and gas processing. These units focus on design, optimisation and integration of process technologies and their associated heat and power supply systems.

In two research-related units, students develop their research skills and prepare a proposal for their research project. These units develop students skills in critical assessment of research literature, group work, written and oral communication, time management and research planning.

Students then carry out the research project during the third trimester. In these projects, students apply their knowledge and skills in process design and integration to investigate a wide range of process technologies and design methodologies. Recent projects have addressed modelling, assessment and optimisation of petroleum refinery hydrotreating processes, crude oil distillation systems, power plants, waste heat recovery systems, refrigeration cycles with mixed refrigerants, heat recovery steam generators, biorefining and biocatalytic processes and waste-to-energy technologies.

The course also aims to develop students' skills in implementing engineering models, optimisation and process simulation, in the context of chemical processes, using bespoke and commercially available software.

Industrial relevance of the course
A key feature of the course is the applicability and relevance of the learning to the process industries. The programme is underpinned by research activities in the Centre for Process Integration within the School. This research focuses on energy efficiency, the efficient use of raw materials, the reduction of emissions reduction and operability in the process industries. Much of this research has been supported financially by the Process Integration Research Consortium for over 30 years. Course units are updated regularly to reflect emerging research and design technologies developed at the University of Manchester and also from other research groups worldwide contributing to the field.

The research results have been transferred to industry via research communications, training and software leading to successful industrial application of the new methodologies. The Research Consortium continues to support research in process integration and design in Manchester, identifying industrial needs and challenges requiring further research and investigation and providing valuable feedback on practical application of the methodologies. In addition, the Centre for Process Integration has long history of delivering material in the form of continuing professional development courses, for example in Japan, China, Malaysia, Australia, India, Saudi Arabia, Libya, Europe, the United States, Brazil and Colombia.

Career opportunities

The MSc course in Advanced Process Design and Integration typically attracts 40 students; our graduates have found employment with major international oil and petrochemical companies (e.g. Shell, BP, Reliance and Petrobras and Saudi Aramco), chemical and process companies (e.g. Air Products), engineering, consultancy and software companies (e.g. Jacobs and Aspen Tech) and academia.

Accrediting organisations

This programme is accredited by the IChemE (Institution of Chemical Engineers).

Read less
The MSc Process Systems Engineering programme will widen your understanding of the fundamental concepts of process systems engineering. Read more
The MSc Process Systems Engineering programme will widen your understanding of the fundamental concepts of process systems engineering.

It will provide you with a thorough grounding in current technologies and trends that will prepare you will for a rewarding career and/or further research.

PROGRAMME OVERVIEW

This Masters programme trains graduates of engineering, science or related disciplines in general and specialist process systems engineering subjects.

Such areas are not generally covered in engineering and science curricula, and BSc graduates tend to be ill prepared for the systems challenges they will face in industry or academia on graduation.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time students must study at least two taught technical modules per academic year. It consists of eight taught modules and a dissertation. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-Optimisation and Decision-Making
-Process Modelling and Simulation
-Advanced Process Control
-Renewable Energy Technologies
-Refinery and Petrochemical Process
-Technology, Business & Research Seminars
-Process and Energy Integration
-Process Systems Design
-Supply Chain Management
-Knowledge-based Systems and Artificial Intelligence
-Biomass Processing Technology
-Introduction to Petroleum Production
-Process Safety and Operation Integrity
-Dissertation

FACILITIES, EQUIPMENT AND ACADEMIC SUPPORT

Modules related to the different groups are taught by a total of six full-time members of staff and a number of visiting lecturers.

As part of their learning experience, students have at their disposal a wide range of relevant software needed to support the programme material dissertation projects. In recent years, this work included the design of various knowledge-based and business systems on the internet, the application of optimisation algorithms, and semantic web applications.

Numerous laboratory facilities across the Faculty and the University are also available for those opting for technology-based projects, such as the process engineering facility, a control and robotics facility and signal processing labs.

The work related to the MSc dissertation can often be carried out in parallel with, and in support of, ongoing research. In the past, several graduates have carried on their MSc research to a PhD programme.

CAREER PROSPECTS

Engineers and scientists are increasingly expected to have skills in information systems engineering and decision-support systems alongside their main technical and/or scientific expertise.

Graduates of this programme will be well prepared to help technology-intensive organisations make important decisions in view of vast amounts of information by adopting, combining, implementing and executing the right technologies.

EDUCATIONAL AIMS OF THE PROGRAMME

The programme aims to provide a highly vocational education which is intellectually rigorous and up-to-date. It also aims to provide the students with the necessary skills required for a successful career in the process industries.

This is achieved through a balanced curriculum with a core of process systems engineering modules supplemented by a flexible element by way of elective modules that permit students to pursue an element of specialisation relevant to their backgrounds, interests and/or career aspirations.

An integrated approach is taken so as to provide a coherent view that explores the interrelationships between the various components of the programme. The programme draws on the stimulus of the Faculty’s research activities.

The programme provides the students with the basis for developing their own approach to learning and personal development.

PROGRAMME LEARNING OUTCOMES

Knowledge and understanding
-State-of- the-art knowledge in process systems engineering methods, in the areas of: modelling and simulation of process systems, mathematical optimization and decision making, process systems design, supply chain management, process and energy integration, and advanced process control technologies
-Advanced level of understanding in technical topics of preference, in one or more of the following aspects: renewable energy technologies, refinery and petrochemical processes, biomass processing technologies, and knowledge-based systems

Intellectual / cognitive skills
-Select, define and focus upon an issue at an appropriate level
-Collect and digest knowledge and information selectively and independently to support a particular scientific or engineering enquiry
-Develop and apply relevant and sound methodologies for analysing the issue, developing solutions, recommendations and logical conclusions, and for evaluating the results of own or other’s work

Professional practical skills
-Assess the available systems in the process industries
-Design and/or select appropriate system components, and optimise and evaluate system design
-Apply generic systems engineering methods such as modelling, simulation, and optimization to facilitate the assessment and development of advanced process technologies and systems

Key / transferable skills
-Preparation and delivery of communication and presentation
-Report and essay writing
-Use of general and professional computing tools
-Collaborative working with team members
-Organising and planning of work
-Research into new areas, particularly in the aspect of literature review and skills acquisition

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
This programme delivers a thorough grounding in current technologies and trends, offering comprehensive training in the fundamentals of the subject. Read more
This programme delivers a thorough grounding in current technologies and trends, offering comprehensive training in the fundamentals of the subject.

It combines high-quality education with rigorous intellectual challenges, enabling you to understand the principles of knowledge management, decision-making and design in process systems and business-information technologies.

PROGRAMME OVERVIEW

The MSc Information and Process Systems Engineering programme is aimed at graduates of traditional engineering, science and related disciplines.

Graduates from non-IT or related disciplines tend to be ill-prepared for the information and knowledge-related challenges and demands of today’s business environments.

We offer a wide selection of modules spanning process engineering, information systems, business and management. All taught modules are delivered by qualified experts in the topics and academic staff, assisted by specialist external lecturers.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year. Part-time students must study at least two taught technical modules per academic year. The programme consists of eight taught modules and a dissertation. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-Information Security Management
-Optimisation and Decision-Making
-Process Modelling and Simulation
-Technology, Business and Research Seminars
-Database Systems
-Knowledge-Based Systems and Artificial Intelligence
-Process and Energy Integration
-Process Systems Design
-Supply Chain Management
-Biomass Processing Technology
-Process Safety and Operation Integrity
-Process and Energy Integration
-Transition to a Low Carbon Economy
-Dissertation

FACILITIES, EQUIPMENT AND ACADEMIC SUPPORT

Modules related to the different groups are taught by a total of six full-time members of staff and a number of visiting lecturers.

An extensive library is available for individual study. It stocks more than 85,000 printed books and e-books, and more than 1,400 (1,100 online) journal titles, all in the broad area of engineering. The library support can be extended further through inter-library loans.

As part of their learning experience, students have at their disposal a wide range of relevant software needed to support the programme material dissertation projects.

In recent years, this work included the design of various knowledge-based and business systems on the internet, the application of optimisation algorithms, and semantic web applications, as well as modelling of process systems.

Numerous laboratory facilities across the Faculty and the University are also available for those opting for technology-based projects, such as the process engineering facility, a control and robotics facility and signal processing labs.

The work related to the MSc dissertation can often be carried out in parallel with, and in support of, on-going research. In the past, several graduates have carried on their MSc research to a PhD programme.

RESEARCH

Process integration and systems analysis for sustainability of resources and energy efficiency are carried out within our well-established Centre for Process and Information Systems Engineering (PRISE).

CAREER PROSPECTS

Engineers and scientists are increasingly expected to have skills in information systems engineering and decision support systems alongside their main technical and/or scientific expertise.

Graduates of these programmes will be well prepared to help technology-intensive organisations make important decisions in respect of vast amounts of information, by adopting, combining, implementing and executing the right technologies.

EDUCATIONAL AIMS OF THE PROGRAMME

The primary aims are achieved through a balanced, multi-disciplinary curriculum with a core of information systems engineering modules and decision-making and process systems engineering modules as well as a flexible element by way of elective modules that permit students to pursue an element of specialisation relevant to their backgrounds, interests and/or career aspirations.

An integrated approach is taken so as to provide a coherent view that explores the interrelationships between the various components of the programme.

The programme draws on the stimulus of recent research activities in the Faculty of Engineering and Physical Sciences. The programme provides the students with the basis for developing their own approach to learning and personal development.

PROGRAMME LEARNING OUTCOMES

The programme provides opportunities for students to develop and demonstrate knowledge and understanding, skills, qualities and other attributes in the following areas:

Knowledge and understanding
-The sources, technologies, systems, performance, and applications in information and process engineering
-Approaches to the assessment of information and process technologies
-Decision making in complex systems
-Optimisation and operations research
-Technical systems modelling
-Databases and data protection
-Representation of design processes
-Systematic approaches to observing organisational data security processes
-Understanding research issues
-Literature studies and research planning
-Experimental planning
-Communication of research outcomes
-Design of decision-support systems
-Development of databases, ontologies and agent-based architectures
-Information technology and security
-Process modelling and simulation

Intellectual / cognitive skills
-Select, define and focus upon an issue at an appropriate level
-Collect and digest knowledge and information selectively and independently to support a particular scientific or engineering enquiry
-Develop and apply relevant and sound methodologies for analysing the issue, developing solutions, recommendations and logical conclusions, and for evaluating the results of own or other’s work

Professional practical skills
-Assess the available information and process and their interaction
-Design and select appropriate collection and storage, and optimise and evaluate system design
-Apply generic systems engineering methods such as conceptual design and optimization to facilitate the assessment and development of information, information security and process technologies and systems

Key / transferable skills
-Preparation and delivery of communication and presentation
-Report and essay writing
-Use of general and professional computing tools
-Collaborative working with team members
-Organizing and planning of work
-Research into new areas, particularly in the aspect of literature review and skills acquisition

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
With an increasing awareness of the environmental impact of modern manufacturing, graduates with the combined skills taught on this programme are highly sought after by both process and environmental industries. Read more
With an increasing awareness of the environmental impact of modern manufacturing, graduates with the combined skills taught on this programme are highly sought after by both process and environmental industries.

If you want to develop core skills in process systems engineering, yet focusing your attention on environmental systems approaches, this Masters is for you.

PROGRAMME OVERVIEW

This programme explores technology across a wide scope of engineering disciplines and will train you in general and specialist process systems engineering – crucial aspects for finance, industrial management and computer-integrated manufacturing.

There is a wide selection of modules on offer within the programme. All taught modules are delivered by qualified experts in the topics and academic members of University staff, assisted by specialist external lecturers.

Our programme combines high-quality education with substantial intellectual challenges, making you aware of current technologies and trends while providing a rigorous training in the fundamentals of the subject.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time students must study at least two taught technical modules per academic year. It consists of eight taught modules and a dissertation. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-Life Cycle Thinking
-Optimisation and Decision-Making
-Renewable Energy Technologies
-Process Modelling and Simulation
-Solar Energy Technology
-Advanced Process Control
-Technology, Business and Research Seminars
-Environmental Law
-Sustainable Development Applications
-Process and Energy Integration
-Process Systems Design
-Dissertation

EDUCATIONAL AIMS OF THE PROGRAMME

The programme combines advanced material in two popular and complementary topics: systems engineering and environmental engineering. The key learning outcome is a balanced combination of systems and environmental skills and prepares students in a competitive market where both topics appear attractive.

The programme will provide training in general and specialist process and environmental systems engineering subjects, and prepare the students for the systems challenges they will face in industry or academia upon graduation.

The programme disseminates technology with a wide scope among engineering disciplines, with a wide selection of modules on offer. All taught modules are delivered by qualified experts in the topics and academic members of the university staff, assisted by specialist external lecturers.

The programme provides high-quality education with substantial intellectual challenges, commensurate with the financial rewards and job satisfaction when venturing into the real world. A key component is to make the student aware of current technologies and trends, whilst providing a rigorous training in the fundamentals of the subject.

PROGRAMME LEARNING OUTCOMES

Knowledge and understanding
-State-of- the-art knowledge in process and environmental technologies, in the areas of: life cycle assessment and sustainable development, modelling and simulation of process systems, mathematical optimization and decision making, process systems design, and process and energy integration
-Advanced level of understanding in technical topics of preference, in one or more of the following aspects: general renewable energy technologies, and solar energy in particular; advanced process control

Intellectual / cognitive skills
-Select, define and focus upon an issue at an appropriate level
-Collect and digest knowledge and information selectively and independently to support a particular scientific or engineering enquiry
-Develop and apply relevant and sound methodologies for analysing the issue, developing solutions, recommendations and logical conclusions, and for evaluating the results of own or other’s work

Professional practical skills
-Assess the available systems in the process industries with focus on environmental challenges
-Design and/or select appropriate system components, and optimise and evaluate system design
-Apply generic systems engineering methods such as modelling, simulation, and optimization to facilitate the assessment and development of advanced process and environmental technologies and systems

Key / transferable skills
-Preparation and delivery of communication and presentation
-Report and essay writing
-Use of general and professional computing tools
-Collaborative working with team members
-Organising and planning of work
-Research into new areas, particularly in the aspect of literature review and skills acquisition

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
This part-time modular programme is mainly for industry-based students from the UK and overseas whose focus is on process technology, management, business and IT. Read more

Why this course?

This part-time modular programme is mainly for industry-based students from the UK and overseas whose focus is on process technology, management, business and IT.

The course is accredited by the Institution of Chemical Engineers (IChemE), an international body of Chemical Engineers operating in countries such as the UK, Australia, New Zealand, Singapore, and more. Graduates can fulfil the Master’s degree requirement for gaining chartership and becoming a Chartered Engineer (CEng).

This course uses a project and work-based approach. It operates mainly by distance learning to allow you to spend the minimum time off-the-job. The programme meets the development needs of graduates from a range of engineering, technology and science disciplines, for example:
- Chemical Engineers
- Mechanical Engineers
- Control Engineers
- Chemists

It’s relevant to a broad range of type and size of company throughout the chemical and process sectors.

For graduates in disciplines other than chemical engineering, a wide range of chemical engineering bridging modules are available and can be studied as part of an agreed programme prior to starting the MSc.

See the website https://www.strath.ac.uk/courses/postgraduatetaught/processtechnologymanagement/

You'll study

The MSc Chemical Technology & Management and the MSc Process Technology & Management are delivered in parallel. Both courses have some of the same core classes. Some of the classes relate to business/management and IT and some are technical classes of mutual interest.

The course format is a three year, modular course with a major final year project completed in your place of work. A two year postgraduate diploma option and one year postgraduate certificate are also available.

You can tailor the degree to your own requirements by selecting classes from the areas of:
- Process Technology
- Chemical Technology
- Business/IT

The Process Technology modules address two major priority areas for the process industries:
- The design, optimisation, control and operation of safe, clean, economically viable processes
- A deeper understanding of principles in complex areas, such as reactors, multi-phase mixtures and advanced separation processes

- How many classes do you need to complete?
The MSc requires 12 taught classes and a work-based project (equivalent to six modules). The diploma requires 12 classes and the certificate six classes.
For graduates in disciplines other than chemical engineering, foundation or bridging modules in chemical engineering are available.

- Final project
You’ll normally take on this project in your own workplace allowing you to make practical use of the concepts learned throughout the course. The project is the main focus of year 3 of the course. An academic supervisor with experience in your chosen project field will help you with the academic requirements of the project. The management and eventual conclusion of the project will be driven by you.

Facilities

In the department of Chemical & Process Engineering we've state-of-the-art research laboratories that opened in 2008. They include a comprehensive suite of experimental facilities including:
- light scattering
- spectroscopy
- adsorption measurements
- high pressure viscometry

Distance learning students are able to access to the University library online services, borrow online books and download academic papers and journals. You'll be able to access the University of Strathclyde library which holds 1,200,700 electronic books, 239 databases and over 105,000 e-journals that can be used 24 hours a day from any suitably enabled computer. The library also offers a postal service for distance learning students.

Course awards

Teaching staff in the department regularly receive nominations in the annual University-wide Teaching Excellence Awards, voted for by Strathclyde’s students. Staff have also been in receipt of external awards from organisations such as the IChemE and the Royal Academy of Engineering.

Additional information

This programme is only available on a part-time basis. If you want to cover the same scope of subjects on a full-time basis you should apply for the MSc Advanced Chemical & Process Engineering or MSc Sustainable Engineering: Chemical Processing.

Learning & teaching

The course is based on printed lecture notes and material delivered from the University’s Virtual Learning Environment (VLE), ‘myplace’. GoToWebinar is used for live tutorial sessions.

Lecturers provide support through:
- online tutorials
- forums
- email
- telephone
- face to face on campus tutorials

Engineering modules are run by staff in the Chemical and Process Engineering department and specialists from industry.

Distance learning students are also welcome to attend full time lectures and tutorials and access on campus facilities if they are in the Glasgow area either temporarily or as a local resident.

- Guest lectures
There are a number guest lectures from experts across several industries.

Careers

Whether you're planning to progress your career into management, redevelop yourself as an engineer or move into a new industry – a Masters degree will expand your career opportunities. As you choose your own modules, the MSc Process Technology and Management allows flexible and adaptable learning, so that you can plan your degree to you own career aspirations. Relevant industries that graduates work in include oil and gas, food and drink, pharmaceutical, water treatment and many more.

In addition, this MSc will provide you with a means to validate your skills and competency to employers – but also to the engineering council (specifically IChemE) opening up new prospects with charterships and further development.

- Where are they now?
100% of our graduates are in work or further study.*

Job titles include:
Manufacturing Co-ordinator
Operations Director
Process Chemist
Process Engineer
Production Chemist
Senior Research Engineer

Employers include:
Bristol-Myers Squibb
Commonwealth Scientific and Industrial Research Organisation (CSIRO)
DSM Nutritional Products Ltd
H2Oil & Gas Ltd
Infineum UK Ltd
Simon Carves Engineering

*Based on the results of the national Destinations of Leavers from Higher Education Survey (2010/11 and 2011/12).

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/index.jsp

Read less
Created in response to the worldwide shortage of qualified engineers in the petroleum-refining systems-engineering industry, our programme combines technologies, operations and economics with modelling, simulation, optimisation, and process design and integration. Read more
Created in response to the worldwide shortage of qualified engineers in the petroleum-refining systems-engineering industry, our programme combines technologies, operations and economics with modelling, simulation, optimisation, and process design and integration.

PROGRAMME OVERVIEW

This programme will equip you with the essential knowledge for engineering careers in the oil, gas and petrochemical sectors.

Upon completion of the course you will have gained a comprehensive understanding of oil refining and associated downstream processing technologies, operations and economics; process safety and operations integrity; and methods for the optimal design of process systems.

You will learn about the general economics of the energy sector, oil exploration and production, as well as renewable energy systems.

Furthermore, your study of the various aspects of petroleum refining will be augmented by unique work assignments at a virtual oil-refining and chemical company.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time students must study at least two taught technical modules per academic year. It consists of eight taught modules and a dissertation. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-Optimisation and Decision-Making
-Process Modelling and Simulation
-Refinery and Petrochemical Process
-Renewable Energy Technologies
-Solar Energy Technology
-Advanced Process Control
-Technology, Business & Research Seminars
-Energy Economics and Technology
-Process and Energy Integration
-Process Systems Design
-Process Safety and Operation Integrity
-Knowledge-based Systems and Artificial Intelligence
-Supply Chain Management
-Biomass Processing Technology
-Introduction to Petroleum Production
-Wind Energy Technology
-Economics of International Oil & Gas
-Dissertation

EDUCATIONAL AIMS OF THE PROGRAMME

The programme aims to provide a highly vocational education that equips the students with the essential knowledge and skills required to work as competent engineers in the petrochemical sector.

This is to be achieved through combining proper material in two popular and complementary topics: process systems engineering and petroleum refining. The key objective is to develop a sound understanding of oil refining and downstream processing technologies, process safety and operation integrity, as well as systems methods for the optimal design of process systems.

A balanced curriculum is provided with essential modules from these two areas supplemented by a flexible element by way of elective modules that permit students to pursue subjects of preference relevant to their backgrounds, interests and/or career aspirations.

An integrated approach is taken so as to provide a coherent view that explores the interrelationships between the various components of the programme.

PROGRAMME LEARNING OUTCOMES

Knowledge and understanding
-State-of- the-art knowledge in petroleum refining and petrochemical processing, in terms of the technologies of processes that comprise a modern refinery and petrochemicals complex
-The principles for analysing and improving the profitability of refining and petrochemicals processing
-General Safety, health, and environment (SHE) principles on a refinery and petrochemicals complex
-Methods and systems for ensuring safe and reliable design and operation of process units
-State-of- the-art knowledge in process systems engineering methods, in the areas of: modelling and simulation of process systems, mathematical optimization and decision making, process systems design and process and energy integration
-Advanced level of understanding in technical topics of preference, in one or more of the following aspects: petroleum exploration and production, economics of the energy sector, sustainable and renewable systems, supply chain management

Intellectual / cognitive skills
-The programme aims to strengthen cognitive skills of the students, particularly in the aspects of problem definition, knowledge and information acquiring, synthesis, and creativity, as collectively demonstrable through the successful completion of the research dissertation.
-Select, define and focus upon an issue at an appropriate level
-Collect and digest knowledge and information selectively and independently to support a particular scientific or engineering enquiry
-Develop and apply relevant and sound methodologies for analysing the issue, developing solutions, recommendations and logical conclusions, and for evaluating the results of own or other’s work

Professional practical skills
-Apply knowledge of the operation of refineries to analyze and to improve the profitability of refining and petrochemical processing
-Apply relevant principles, methods, and tools to improve the safety and operation integrity of refineries
-Apply systems engineering methods such as modelling, simulation, optimization, and energy integration to improve the design of petroleum refining units and systems

Key / transferable skills
-The programme aims to strengthen a range of transferable skills that are relevant to the needs of existing and future professionals in knowledge intensive industries irrespective of their sector of operation.
-Preparation and delivery of communication and presentation
-Report and essay writing
-Use of general and professional computing tools
-Collaborative working with team members
-Organizing and planning of work
-Research into new areas, particularly in the aspect of literature review and skills acquisition

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
This course is mainly for engineering students from the UK and overseas who want to develop careers in the oil, gas, process and chemical industries. Read more

Why this course?

This course is mainly for engineering students from the UK and overseas who want to develop careers in the oil, gas, process and chemical industries. The course has a strong project-based approach and is relevant to the recruitment needs of a wide range of employers.

It meets accreditation requirements for the Institute of Chemical Engineers allowing graduates to apply for chartered engineer status.

Our course is one of the few MSc programmes to offer the module Safety Management Practices. It offers exposure to best industry practice and much required industrial training.

See the website https://www.strath.ac.uk/courses/postgraduatetaught/advancedchemicalprocessengineering/

You’ll study

This is a modular course. To gain the Postgraduate Certificate you need to pass six modules.

The Diploma requires eight taught modules and a group project.

The MSc requires eight taught modules, a group design project and an individual research project. You'll work with our talented team of researchers on chemical engineering issues of the future.

The key areas of the programme are:
Chemical & Process Engineering:
- process design principles
- safety management practices
- energy systems
- colloid engineering
- multi-phase processing
- petroleum engineering
- environmental control technologies
- process safety design
- emerging technologies
- programming & optimisation

Multidisciplinary Skills:
- project management
- risk management
- information management
- understanding financial information

If you want to study the same scope of subjects but be part a sustainable engineering programme, you should apply for the MSc Sustainable Engineering: Chemical Processing pathway.

You’ll work on an individual research project with our highly talented team of leading researchers on chemical engineering issues of the future.

Facilities

We're one of the largest chemical engineering departments in the country.
We have new state-of-the-art research laboratories. These include experimental facilities for light scattering, spectroscopy, adsorption measurements and high pressure viscometry.
You'll have access to the department's own dedicated computer suite which is installed with industry standard software.

Accreditation

The course meets accreditation requirements for the Institute of Chemical Engineers allowing graduates to apply for chartered engineer status.

Guest lecturers

In the Emerging Technologies modules you’ll benefit from external speakers who are leading practitioners in their field.

Learning & teaching

All classes are delivered over a twelve week period.
The Emerging Technologies module makes extensive use of external speakers who are leading practitioners in their field.
The Safety Management Practices module offers exposure to best industry practice and is one of a few MSc programmes to offer much required industrial training.

Assessment

Assessment is through a balanced work load of class based assessment, individual and group based projects and exams.

Careers

There is growing demand for high-calibre graduates who can develop and apply advanced process technologies in chemical and process industries.

Some students may be eligible to apply for PhD places in the department and across the Engineering faculty.

How much will I earn?

- The average graduate starting salary for a chemical engineer is £28,000*.
- The average salary for chemical engineers with experience is £53,000*.
- Chartered chemical engineers can earn £70,000* plus.

*Information is intended only as a guide.

Read less
This programme is idea for graduates from engineering, science or other relevant backgrounds and who have an interest in pursuing a successful career in research, technological change and the commercialisation of renewable-energy systems. Read more
This programme is idea for graduates from engineering, science or other relevant backgrounds and who have an interest in pursuing a successful career in research, technological change and the commercialisation of renewable-energy systems.

This programme will give you opportunities to learn about major renewable-energy technologies, energy-sector economics, supply-chain management and sustainable development.

PROGRAMME OVERVIEW

Created in the context of the rapid advancement of the renewable-energy industry, this Masters programme investigates both renewable energy and systems technologies.

It is designed to build your competence and confidence in the R&D and engineering tasks that are demanded of scientific engineers in the renewable and sustainable-development sector.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time students must study at least two taught technical modules per academic year. It consists of eight taught modules and a dissertation. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-Optimisation and Decision-Making
-Process Modelling and Simulation
-Technology, Business & Research Seminars
-Renewable Energy Technologies
-Refinery and Petrochemical Process
-Solar Energy Technology
-Advanced Process Control
-Energy Economics and Technology
-Process Systems Design
-Biomass Processing Technology
-Wind Energy Technology
-Process and Energy Integration
-Knowledge-based Systems and Artificial Intelligence
-Supply Chain Management
-Introduction to Petroleum Production
-Process Safety and Operation Integrity
-Economics of International Oil & Gas
-Dissertation

FACILITIES, EQUIPMENT AND ACADEMIC SUPPORT

Modules related to the different groups are taught by a total of six full-time members of staff and a number of visiting lecturers.

As part of their learning experience, students have at their disposal a wide range of relevant software needed to support the programme material dissertation projects. In recent years, this work included the design of various knowledge-based and business systems on the internet, the application of optimisation algorithms, and semantic web applications.

Numerous laboratory facilities across the Faculty and the University are also available for those opting for technology-based projects, such as the process engineering facility, a control and robotics facility and signal processing labs.

The work related to the MSc dissertation can often be carried out in parallel with, and in support of, ongoing research. In the past, several graduates have carried on their MSc research to a PhD programme.

CAREER PROSPECTS

Engineers and scientists are increasingly expected to have skills in information systems engineering and decision-support systems alongside their main technical and/or scientific expertise.

Graduates of this programme will be well prepared to help technology-intensive organisations make important decisions in view of vast amounts of information by adopting, combining, implementing and executing the right technologies.

EDUCATIONAL AIMS OF THE PROGRAMME

This programme investigates both renewable energy and systems technologies in order to produce scientific researchers and engineers who are competent in the R&D and engineering tasks applicable to the renewable energy and sustainable development sectors.

Its primary aims lie in developing a global understanding of the major types of renewable energy technologies, in-depth knowledge of the technology for biomass-based renewable energy, and knowledge and skills in systems modelling and optimisation.

A balanced curriculum will be provided with a core of renewable energy and systems engineering modules supplemented by a flexible element by way of elective modules that permit students to pursue an element of specialisation relevant to their backgrounds, interests and/or career aspirations.

An integrated approach is taken so as to provide a coherent view that explores the interrelationships between the various components of the programme.

PROGRAMME LEARNING OUTCOMES

Knowledge and understanding
-State-of- the-art knowledge in renewable energy technologies, in terms of: the sources, technologies, systems, performance, and applications of all the major types of renewable energy; approaches to the assessment of renewable energy technologies; the processes, equipment, products, and integration opportunities of biomass-based manufacturing
-State-of- the-art knowledge in process systems engineering methods, in the areas of: modelling and simulation of process systems; mathematical optimization and decision making; process systems design
-Advanced level of understanding in technical topics of preference, in one or more of the following aspects: process and energy integration, economics of the energy sector, sustainable development, supply chain management

Intellectual / cognitive skills
-Select, define and focus upon an issue at an appropriate level
-Collect and digest knowledge and information selectively and independently to support a particular scientific or engineering enquiry
-Develop and apply relevant and sound methodologies for analysing the issue, developing solutions, recommendations and logical conclusions, and for evaluating the results of own or other’s work

Professional practical skills
-Assess the available renewable energy systems
-Design and select appropriate collection and storage, and optimise and evaluate system design
-Apply generic systems engineering methods such as modelling, simulation, and optimization to facilitate the assessment and development of renewable energy technologies and systems

Key / transferable skills
-Preparation and delivery of communication and presentation
-Report and essay writing
-Use of general and professional computing tools
-Collaborative working with team members
-Organizing and planning of work
-Research into new areas, particularly in the aspect of literature review and skills acquisition

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
This course offers students a grounding in modelling, simulation and optimisation for the process industries, while helping them to strengthen their understanding of chemical engineering. Read more
This course offers students a grounding in modelling, simulation and optimisation for the process industries, while helping them to strengthen their understanding of chemical engineering. Students take a minimum of four systems engineering modules, six "free" modules (up to two management courses), follow the professional skills workshops and join the Process Systems Engineering research focus area for a year-long research project. This course is ideal for students wishing to become fluent in the use of techniques and tools for computer-aided decision-making.

The programme aims to:
• produce graduates equipped to pursue careers in Process Systems Engineering, in industry, the public sector and non-governmental organisations, or to enter Ph.D. programmes;
• provide the basis for the understanding of the development and key achievements of the major areas of Process Systems Engineering and in Chemical Engineering topics of interest;
• develop an understanding of how this knowledge may be applied in practice in an economic and environmentally friendly fashion;
• foster the acquisition and implementation of broad research and analytical skills both general and related to Process Systems Engineering;
• attract highly motivated students, both from within the UK and from overseas;
• develop new areas of teaching in response to the advance of scholarship and the needs of vocational training;
• offer students with industrial experience the possibility to gain a deeper fundamental grounding.

Read less
This programme is accredited by the French Conférence des Grandes Ecoles and is accessible after a 4 to 5 years degree. To equip graduates with a set of competencies to manage Supply Chains and Supply Networks. Read more
This programme is accredited by the French Conférence des Grandes Ecoles and is accessible after a 4 to 5 years degree.

Objectives

To equip graduates with a set of competencies to manage Supply Chains and Supply Networks.

Strong Points

- A programme taught in English in a very international environment : EM Normandie welcomes over 500 foreign students every year
Innovative Logistics Topics : Green Logistics, Green Supply Chain,...
- Lecturing by world class experts from a variety of countries and cultures
- A professionally-oriented programme : Junior Consulting Projects (HEC Entrepreneurs), In-company Contests, Business Dating Sessions, Professional Conventions
- A campus right in the heart of an exception logistics area : Le Havre is the n°1 French Port for External Trade & Containers, Elected Best European Port by Asian Professionals
- A Research Institute (IPER) as a resource for maritime and port management expertise
- A cohort of manageable size and individual coaching

Programme

- 4 modules are scheduled during the first semester, from September to December
- 3 modules are scheduled during the second semester, from January to April

Professionalisation -

- One 5-week Junior Consulting Project: Logistics Auditing in a company. JCPs are found and validated by the Programme staff (Pédagogie HEC Entrepreneurs);
- One 2-week Challenge contest: Flow Optimisation;
- One 5-week minimum work placement/internship. stage en entreprise de 5 mois minimum.

All courses taught in English by EM Normandy Faculty Members, Visiting Faculty from various countries, and Experienced Professionals in the Marketing, Sales, International Business, and Cross-cultural Management industries.

Practical Information

Program duration: One academic year (on campus)

Tuition: €10,990

Teaching Campus: Le Havre

Important dates -
Admission session: April 18th, 2016
Intake: September 7th, 2016

Infrastructure -
The School offers:

- 22,200 m2 of teaching facilities in Caen, Deauville, Le Havre, Oxford and Paris,
- 8 Amphitheatres,
- 2 Sports Centres,
- 5 Relaxation Areas,
- 2 Cafeterias,
- 2 Media Centre & Library with 33,500 books, 530 national and international journals, and 9 data banks open to all students,
- 12 PC and Multimedia Rooms
- 280 PCs on free access,
- 4 Very High Speed Internet Networks,
- 10 LaSmartEcole® equipped rooms,
- Wi-Fi access on all campuses.

Accommodation -
On each of the campuses, you may rent rooms with local people, flats with landlords or in university residences, located from 200 m to 1.5km from the campuses. EM Normandie is a member of Association havraise pour le logement étudiant http://www.ahloet.fr .

Location of the Campus -
EM Normandie located in Normandy, a region in the Northwestern part of France, close to Paris, which can easily be reached by train and motorway. Several ferries a day to the UK (Portsmouth).

The Le Havre Campus enjoys an exceptional location in the city centre, less than 200 meters from the sea-front and beach. A tramway line links the seafront and city centre to the rest of the town. This privileged location helps the integration of foreign students.

In this major Normandy city, the downtown area has been listed as a Unesco World Heritage since 2005 for its ‘innovative way of using concrete'.

Le Havre is the number 1 port in France for Exports and containers.

A city of Arts and History, Le Havre offers a pleasant living environment to students, with many cultural, intellectual and sports options.

Le Havre was ranked by the L'Etudiant website as the 12th medium-range city for pleasant studying conditions - http://www.letudiant.fr/palmares/palmares-des-villes-etudiantes/havre-le.html

Le Havre is also ranked as the 4th city where to ‘study successfully and graduate'.

International Candidates

Admission -
International Applicants (who require a visa) must send their applications by June 13th 2016 at the latest. Application files will be accepted as from September 2015.

Alongside their EM Normandie application files, international applicants must file in a Campus France application to make easier to obtain their visas - http://www.campusfrance.org/fr/page/procedure-cef-creez-votre-dossier

If you are admitted, you will be requested to send in a first down payment of € 1,000 (which will be deducted from the total tuition fee) in order to secure your place in the programme. Once the down payment has been received, you will then be helped in your accommodation and visa application formalities by the International Relations Service.

http://www.ecole-management-normandie.fr/uk/formation/msc/msc-supply-chain-management/international-candidates-_1674.html

Careers

Career Opportunities -
The relevant sectors of activity include Transport, Mass Distribution, Industrial Production as well as Banking or Insurance Services.

Professional openings are found in Strategic Information Management and Supply Chain Process Optimisation. Graduates will be purchasing services for Global Logistics Integrators or International Supply and Purchasing Managers in sectors as varied as Agrifood, Cosmetics, our even Luxury Hotel Industries. Finally, when becoming Strategic Planners, they will be able to match their economic and financial objectives with their solutions for better logistics organisation.

Examples;

- Supply Chain Manager
- Head of Industrial Operations
- Head of Planning/Scheduling
- Head of Procurement
- Head of Logistics Flows
- Products Manager
- Industrial Buyer
- Supply Chain Controller
- Consultant in Supply Chain Management

http://www.ecole-management-normandie.fr/uk/formation/msc/msc-supply-chain-management/careers_1675.html

Admission

Find out how to apply here - http://www.ecole-management-normandie.fr/uk/formation/msc/msc-supply-chain-management/admission_1676.html

Read less
The MSc Environmental Engineering course provides highly employable graduates who will act as managers and leaders serving the environmental needs of the process industries. Read more
The MSc Environmental Engineering course provides highly employable graduates who will act as managers and leaders serving the environmental needs of the process industries.

The scale of modern industralisation has given rise to environmental problems of unprecedented complexity. This MSc examines environmental problems like toxic waste, air pollution, waste disposal, global warming, contaminated land and water. The challenge for today’s environmental engineers is to manage these problems through a high level of resource management and technological innovation.

Today’s environmental problems require innovation in improvements to manufacturing processes and in the utilisation
of natural resources. Both the assessment and management of the effects of natural and human activity on the natural and built
environment are examined in this course. The course demands a high level of resource management and is designed to enable graduates to work across the interface between engineering and the environment.

Students will develop:
a solid understanding of existing technology and its application, and an appreciation of the economic, legal, social and ethical aspects of the problems presented
skills in research, project management, problem solving and reporting
the ability to communicate ideas effectively in written reports, verbally and by means of presentations to groups
the ability to exercise original thought
the ability to plan and undertake an individual project
the ability to understand and apply the theory, method and
practice of environmental engineering
interpersonal communication and professional skill

Previous research projects have included:
assessment of energy crops for combined heat and power systems
bio-diesel process optimisation
microbial Fuel Cells
nanobots for contaminated land remediation
metal contamination of lakes near Nottingham
starch nanoparticles for water treatment
renewable energy at point of consumption

Scholarship information can be found at http://www.nottingham.ac.uk/graduateschool/funding/index.aspx

Read less
Research in biotechnology at Newcastle spans the Faculty of Medical Sciences (FMS) and the Faculty of Science, Agriculture and Engineering (SAgE). Read more

Course overview

Research in biotechnology at Newcastle spans the Faculty of Medical Sciences (FMS) and the Faculty of Science, Agriculture and Engineering (SAgE). We invite proposals for MPhil and PhD projects in biotechnology across the fields of medical sciences, biological, agricultural and environmental sciences, and marine science and technology.

We offer MPhil and PhD supervision in the following research areas:

Medical sciences

In medical sciences our research focuses on translational medicine, from drug discovery and development to effective product commercialisation and process optimisation. Our key areas are: the development of drugs for the treatment of cancer and psychiatric disorders; novel antibiotic innovation; design and development of integrated electrochemical and bio-microelectromechanical (bio-MEMS) sensors for application to point-of-care diagnosis of disease processes and sensor technologies for real-time, high content intracellular analysis using polymer-based nanosensor systems.

Biological, agricultural and environmental sciences

In biological, agricultural and environmental sciences our research focuses on: the search and discovery of commercially significant natural products; the production of crops with novel traits; the fundamental role played by micro-organisms in the turnover of pollutants and the production of high value novel compounds, including pharmaceuticals and pesticides.

Marine science and technology

Our work has led to pioneering advancements in developing novel antibiotics and omega-3 oils from plankton. We also explore the industrial applications of marine organisms such as the development of environmentally friendly antifouling coatings.

Training and skills

As a research student you will receive a tailored package of academic and support elements to ensure you maximise your research and future career. The academic information is in the programme profile and you will be supported by our Faculty of Medical Sciences Graduate School.

For further information see http://www.ncl.ac.uk/postgraduate/courses/degrees/biotechnology-mphil-phd/#training&skills

How to apply

For course application information see http://www.ncl.ac.uk/postgraduate/courses/degrees/biotechnology-mphil-phd/#howtoapply

Read less
The MPhil and PhD programmes in Chemical Engineering attract students from diverse disciplinary backgrounds such as statistics, maths, electrical engineering, chemistry and physics. Read more

Course overview

The MPhil and PhD programmes in Chemical Engineering attract students from diverse disciplinary backgrounds such as statistics, maths, electrical engineering, chemistry and physics. You may work on multidisciplinary research projects in collaboration with colleagues across the University or from external organisations.

Research Areas

MPhil and PhD supervision is normally available in the following areas:

Advanced materials:
Every article, instrument, machine or device we use depends for its success upon materials, design and effective production. We work on a wide range of materials topics including: new material development; optimising of materials processing; testing and evaluation at component scale and at high spatial resolution; modelling; failure analysis.

Much of our work relates to materials and processes for renewable energy generation, energy efficiency, carbon capture and storage. We also use biological and bio-inspired processes to develop new functional materials.

Electrochemical engineering science:
Electrochemical Engineering Science (EES) arose out of the pioneering fuel cell research at Newcastle in the 1960s. We are continuing this research on new catalyst and membrane materials, optimising electrode structures and developing meaningful fuel cell test procedures.

We are investigating electrochemical methods for surface structuring, probing and testing at the micron and nanoscale. More recently, we have been using electrochemical analysis to understand cellular and microbial catalysis and processes.

Process intensification:
Process intensification is the philosophy that processes can often be made smaller, more efficient and safer using new process technologies and techniques, resulting in order of magnitude reductions in the size of process equipment. This leads to substantial capital cost savings and often a reduction in running costs.

Process modelling and optimisation:
Our goal is to attain better insight into process behaviour to achieve improved process and product design and operational performance. The complexity of the challenge arises from the presence of physiochemical interactions, multiple unit operations and multi-scale effects.

Underpinning our activity is the need for improved process and product characterisation through the development and application of process analytical techniques, hybrid statistical and empirical modeling and high throughput technologies for chemical synthesis.

Training and Skills

As a research student you will receive a tailored package of academic and support elements to ensure you maximise your research and future career. The academic information is in the programme profile and you will be supported by our Postgraduate Researcher Development Programme, doctoral training centres and Research Student Support Team.

For further information see http://www.ncl.ac.uk/postgraduate/courses/degrees/chemical-engineering-mphil-phd/#training&skills

How to apply

For course application information see http://www.ncl.ac.uk/postgraduate/courses/degrees/chemical-engineering-mphil-phd/#howtoapply

Read less
Take advantage of one of our 100 Master’s Scholarships to study Fuel Technology at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Read more
Take advantage of one of our 100 Master’s Scholarships to study Fuel Technology at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Postgraduate loans are also available to English and Welsh domiciled students. For more information on fees and funding please visit our website.

Key Features of MSc in Fuel Technology

Providing a sustainable, affordable and secure energy future through the discovery and implementation of new technology is a key challenge for the 21st Century. With more people requiring energy, effective solutions need to come from a wide range of sources. For the near term, various fuels will be the key to energy globally; presently oil and gas with an increasing reliance on hydrogen and biofuels.

The Energy Safety Research Institute (ESRI) is a leading centre of excellence for the development of advanced technologies in energy resources.

The Centre benefits from world-leading expertise in the area of a wide range of energy technologies and fuel technology.

The Energy Safety Research Institute (ESRI) research areas, broadly speaking, fit into one of three categories:

- Hydrocarbon: Oil and gas production and processing; downstream issues relating to efficient fuel refining; additives and fuel composition/performance chemistry.
- Hydrogen: technologies for the efficient generation of hydrogen from wasted energy generation; photocatalysis for hydrogen generation; hydrogen as an energy vector.
- CO2: technologies for the efficient removal of carbon dioxide from fuel feedstocks; use of carbon dioxide as a fuel source.
- Biofuel: methods for developing the process streams enabling integration of biofuel production with the chemistry industry supply chain.

The MSc by Research Fuel Technology has a wide range of subject choices including:

Catalyst design
Process characterisation
Refining
Process optimisation
Pilot scale studies

MSc by Reasearch in Fuel Technology typically lasts one year full-time, two to three years part-time. This is an individual research project written up in a thesis of 30,000 words.

Facilities

Our new home at the innovative Bay Campus provides some of the best university facilities in the UK, in an outstanding location.

Find out more about the facilities at the Energy Safety Research Institute (ESRI) at Swansea University on our website.

Links with Industry

One of the major strengths of the College of Engineering at Swansea University is the close and extensive involvement with local, national and international engineering companies.

Research

The Research Excellence Framework (REF) 2014 ranks Engineering at Swansea as 10th in the UK for the combined score in research quality across the Engineering disciplines.

World-leading research

The REF shows that 94% of research produced by our academic staff is of World-Leading (4*) or Internationally Excellent (3*) quality. This has increased from 73% in the 2008 RAE.

Research pioneered at the College of Engineering harnesses the expertise of academic staff within the department. This ground-breaking multidisciplinary research informs our world-class teaching with several of our staff leaders in their fields.

Highlights of the Engineering results according to the General Engineering Unit of Assessment:

Research Environment at Swansea ranked 2nd in the UK
Research Impact ranked 10th in the UK
Research Power (3*/4* Equivalent staff) ranked 10th in the UK

Read less
This programme will provide you with the advanced knowledge and skills to pursue a successful career in the oil and gas industry. Read more
This programme will provide you with the advanced knowledge and skills to pursue a successful career in the oil and gas industry.

You’ll study modules covering core topics related to the downstream activities of the industry including drilling and production technology, oilfield chemistry and corrosion, and chemical reaction processes. You’ll also have the option to take modules in topics such as separation processes, process optimisation and control, and multi-scale modelling and simulation.

Practical work supports your lectures and seminars, as you split your time between the lab and the classroom. You’ll also undertake a major research project investigating a specific topic in petroleum production engineering, which could relate to your own interests or career intentions. Taught by experts in our world-class facilities, you’ll gain the knowledge and skills to thrive in a challenging and exciting industry.

You’ll benefit from the chance to study in cutting-edge facilities where our researchers are pushing the boundaries of chemical and process engineering. We have facilities for characterising particulate systems for a wide range of technological materials, as well as facilities for fuel characterisation, environmental monitoring and pollution control. In our Energy Building, you’ll find an engine testing fuel evaluation and transport emissions suite and other characterisation equipment.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X