• Ross University School of Veterinary Medicine Featured Masters Courses
  • University of Southampton Featured Masters Courses
  • Anglia Ruskin University Featured Masters Courses
  • University of Cambridge Featured Masters Courses
  • Swansea University Featured Masters Courses
King’s College London Featured Masters Courses
University of Reading Featured Masters Courses
Queen’s University Belfast Featured Masters Courses
Leeds Beckett University Featured Masters Courses
Aberdeen University Featured Masters Courses
"petroleum" AND "engineer…×
0 miles

Masters Degrees (Petroleum Engineer)

We have 19 Masters Degrees (Petroleum Engineer)

  • "petroleum" AND "engineer" ×
  • clear all
Showing 1 to 15 of 19
Order by 
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance. Read more
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance.

Course details

The programme of lectures and project work, encompasses a wide range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The course is applied in nature and has been designed so that on completion, you are technically well prepared for a career in industry.

Professional accreditation

Our MSc Petroleum Engineering is accredited by the Energy Institute, under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC.

By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification, and the earning potential of chartered petroleum engineers can exceed £100,000 a year.

Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase the industrial networking opportunities for students.

What you study

For the Postgraduate Diploma (PgDip) award you must successfully complete 120 credits of taught modules. For an MSc award you must successfully complete 120 credits of taught modules and a 60-credit master's research project.

You select your master’s research projects from titles suggested by either industry or our academic staff, but you may also, with your supervisor’s agreement, suggest your own titles.

Core modules
-Drill Engineering and Well Completion
-Hydrocarbon Production Engineering
-Material Balance and Recovery Mechanisms
-Petroleum Chemistry
-Petroleum Economics and Simulation
-Petroleum Reservoir Engineering
-Practical Health and Safety Skills
-Research and Study Skills

MSc candidates
-Research Project

Modules offered may vary.

Teaching

The course is delivered using a series of lectures, tutorials and laboratory sessions.

Our MSc Petroleum Engineering is supported by excellent laboratory and engineering machine workshop facilities including fluid flow measurement, computer modelling laboratories, other laboratories and workshops, an excellent library and computing facilities. We have invested around £150,000 in laboratory equipment particularly in within core analysis and enhanced oil recovery.

We have several computer laboratories equipped with specialised and general-purpose software. This generous computing provision gives you extended access to industry-standard software – it allows you to develop skills and techniques using important applications. For upstream processes, Teesside University has access to educational software packages like Petrel, Eclipse, CMG, PIPESIM and Ecrin to simulate the behaviour of oil reservoirs, calculating oil in situ, and oil and gas production optimisation. As for downstream processes, you can use HYSYS to test different scenarios to optimise plant designs.

Facilities include:
Enhanced oil recovery and core analysis laboratory
The flow through porous media, enhanced oil recovery techniques and core analysis is done in the core flooding lab. The lab is equipped with core plugging and trimming, core preparation and conventional core properties measurement equipment. At a higher level, the lab is also equipped to perform some special core analysis measurements such as fluid relative permeabilities as well as rock surface wetting quantification.

Petrophysics laboratory
The petrophysics lab allows you to study the properties of rocks, particularly the measurement of porosity and evaluation of permeability. The lab is equipped with sieve analysis equipment to investigate grain sorting and its effect on permeability and the porosity of rocks. You are able to gauge saturation and fluid flow through porous media.

Surface characterisation laboratory
The rock surface characterisation lab is equipped with a zeta analyser to measure the rock surface electric charge. You study the rock surface wetting state, adsorption and desorption potential using digitised contact angle apparatus and thermos-gravimetric apparatus respectively.

Drilling laboratory
The drilling lab is equipped with mud measurement equipment including mud density, mud rheology and mud filtration systems to enable you to measure mud cake and formation damage. The lab highlights the importance of oilfield drilling fluids.

Assessment varies from module to module. The assessment methodology could include in-course assignments, design exercises, technical reports, presentations or formal examinations. For your MSc project you prepare a dissertation.

Employability

These courses provide specialist education tailored to the requirements of both the upstream and downstream petroleum industry. The relevance of this education combined with careful selection of candidates has encouraged oil and gas companies to target our graduates for recruitment over the years.

The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy, with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists.

It is widely recognised that a steady influx of fresh people and ideas is vital for the longer-term success and stability of an organisation, and it is therefore expected that recruitment will continue, especially for those with motivation and the appropriate qualifications.

Read less
The MSc in Petroleum Engineering programme aims at broadening, strengthening and integrating knowledge and understanding of the oil and gas industry processes. Read more
The MSc in Petroleum Engineering programme aims at broadening, strengthening and integrating knowledge and understanding of the oil and gas industry processes. You'll learn the mathematics, science, computer-based methods, design, and engineering practice to solve petroleum engineering problems of varying complexity, taking in consideration the economic, social and environmental context.

You'll gain a detailed knowledge of the integrated model of the oil reservoir, so that you'll be able to predict, maintain and improve oil and gas production processes. You'll benefit from the detailed instruction you receive on a suite of software packages that are used in the oil and gas industries to maximise cost effective production from the field, these include: PETREL, HYSYS, Eclipse, Prosper and GAP.

At the end of the programme you should have obtained a deep and broad knowledge of the integrated model of the oil reservoir in order to predict, improve, maintain and to innovate the processes of oil and gas production.

Modules

Petroleum geoscience
Petro physics
Reservior engineering and simulation
Drilling and production
Advanced reservoir engineering
Petroleum economics and oilfield management
Group project (summer period)
Dissertation (summer period)

Professional links

• This Masters course is accredited by the Energy Institute.

The Energy Institute (EI) is the professional body for the energy industry delivering good practice and professionalism across the depth and breadth of the sector.

• Society of Petroleum Engineers

LSBU gained approval for the creation of the Society of Petroleum Engineers (SPE) Student Chapter in March 2007. The interaction with SPE-London allows our students to attend specialised conferences related to the oil industry, and also to have invited speakers from the industry, delivering presentations on relevant topics.

Employability

The complexity of the oil and gas industry offers a wide variety of opportunities for career development to petroleum engineers.

In most oil companies worldwide the petroleum engineering team consists of a geologist, a reservoir engineer, a petro-physicist, a drilling engineer and a production engineer. With this Masters qualification you'll be qualified to apply for positions in all of these fields. Each member of this team will be concentrating on their own aspect of the larger task in hand, which is to maximise cost-effective production from the field.

As a graduate of the MSc in Petroleum Engineering your profile will match the needs in different areas of oil and gas production, and reservoir engineering in large companies, which offer attractive graduate programmes, and in medium and small operating and consulting companies.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

• Direct engagement from employers who come in to interview and talk to students
• Job Shop and on-campus recruitment agencies to help your job search
• Mentoring and work shadowing schemes.

Read less
Your programme of study. If have an engineering, science or mathematics degree and you are considering work in the oil and gas industry worldwide Petroleum Engineering can provide you with a wide range of knowledge and skills within the upstream oil and gas extraction area. Read more

Your programme of study

If have an engineering, science or mathematics degree and you are considering work in the oil and gas industry worldwide Petroleum Engineering can provide you with a wide range of knowledge and skills within the upstream oil and gas extraction area. The programme mainly focuses on the skills you need to extract oil which can be the initial geoscience knowledge through to core analysis and reservoir engineering. Within reservoir and well engineering there are several areas of analysis, testing and development you then specialise in. This ensures you have a very robust approach to offshore production with the type of advanced skills to problem solve and troubleshoot different situations.

The programme also develops your skills in formation evaluation, simulation, and appraisal plus safe production and enhancing the recovery of hydrocarbon oil and gas. This programme is highly regarded in the industry internationally and it is recognised by all major players in the oil and gas industry. Careers can be anything from Drilling, Operations, Piping Specification, Production, Reservoir, Subsurface and Wellhead Engineer. The degree hold accreditation from the Energy Institute and Institute of Mechanical Engineers.

This programme is relevant for any oil and gas professional or professional interested in working in the industry worldwide. It is taught by world renowned international experts from the industry, researching and teaching the skills and knowledge necessary. Aberdeen is seen as the oil and gas European capital of the industry with major FTSE 100 multinationals located in the city.

Courses listed for the programme

Semester 1

Fundamentals of Petroleum Geoscience

Petrophysics, Core Analysis, and Formation Evaluation

Reservoir Engineering

Well and Production Engineering

Semester 2

Reservoir Simulation

Well Test: Analysis and Design

Field Development and Petroleum Economics

Enhanced Oil Recovery

Semester 3

Project in Petroleum Engineering

Find out more detail by visiting the programme web page

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/222/petroleum-engineering/

for online visit:

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1076/petroleum-engineering/

Why study at Aberdeen?

  • You get accreditation from the Energy Institute and Institute of Mechanical Engineers
  • The programme is jointly delivered from the department of Geology and Engineering
  • Petroleum Engineering is highly regarded and designed with the industry
  • This programme is also delivered in an online version

Where you study

  • University of Aberdeen
  • 12 Months Full Time or 24 Months Part Time
  • September or January start
  • There is an online programme available from University of Aberdeen to study flexibly (details above)

International Student Fees 2017/2018

Find out about fees:

https://www.abdn.ac.uk/study/international/tuition-fees-and-living-costs-287.php

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page

https://www.abdn.ac.uk/study/postgraduate-taught/finance-funding-1599.php

https://www.abdn.ac.uk/funding/

Living in Aberdeen

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen:

https://abdn.ac.uk/study/student-life

Living costs

https://www.abdn.ac.uk/study/international/finance.php



Read less
IN BRIEF. The first course of its kind in the UK. Enhances your career prospects in the oil and gas industries. Gives you the opportunity to become a Chartered Engineer. Read more

IN BRIEF:

  • The first course of its kind in the UK
  • Enhances your career prospects in the oil and gas industries
  • Gives you the opportunity to become a Chartered Engineer
  • Part-time study option
  • International students can apply

COURSE SUMMARY

This course is designed for engineering graduates who intend to enter or enhance their career prospects in the oil or natural gas industry. It will be re-accredited by the IGEM in 2016.

The course explores the geology, exploration, drilling, production (surface and subsurface), reservoir engineering and management, distribution and transmission of oil and gas from practical and theoretical viewpoints.

You will develop the knowledge and the skills for problem solving in terms of development, design, business and economics management in oil and gas engineering which will assist you to make management and scientific decisions in the workplace.

On completion of this course you may be eligible to join the Institution of Gas Engineers & Managers or Society of Petroleum Engineers which may enable you to qualify as a Chartered Engineer.

COURSE DETAILS

As well as studying the topics outlined in the following modules you will be expected to develop, to a professional standard, a number of transferable skills such as numeracy skills by way of quantitative mathematical analysis, problem solving skills, communication skills during group work, laboratory report writing and time management skills.

DURATION:

September intake

MSc (one year full-time or two years part-time)

PgDip (nine months full-time or one year and six months part-time)

January intake

MSc (one year and four months full-time or two years and eight months part-time)

PgDip (one year full-time or two years part-time)

TEACHING

Teaching will be carried out as formal lectures, laboratories, tutorials and workshops

ASSESSMENT

Petroleum and Gas Engineering students are required to attend all of the modules. There are seven examination sessions. Students must pass all the modules studied with an overall average of at least 50% in the module programmes and in the course assessed work.

All laboratory and course assessed work must be submitted on time and to the required standard.

Students admitted to the course at Diploma level with examination and coursework of 50 % may proceed to MSc level. (120 Credits)

MSc Students must undertake a dissertation (60 Credits) on any aspect of the natural gas business either experimentally or computationally. The project can frequently relate to research work already in the school and or natural gas engineering and management.

CAREER PROSPECTS

Due to the relative uniqueness of this course in the UK, together with the high demand of graduates with the types of skills and knowledge that this course offers, employment prospects are excellent.

Graduates can expect to enter or progress in industries such as petroleum, gas, process engineering, chemical or steel.

LINKS WITH INDUSTRY

This programme is strongly supported by major petroleum and gas engineering technology providers.

You will be assessed by both coursework 50% and examinations 50%



Read less
Your programme of study. This is a flexible online programme which offers you a variety of study options to gain your MSc in Petroleum Engineering from as little as 36 months to a maximum of 72 months to complete with 10-12 hours of study per week on average. Read more

Your programme of study

This is a flexible online programme which offers you a variety of study options to gain your MSc in Petroleum Engineering from as little as 36 months to a maximum of 72 months to complete with 10-12 hours of study per week on average. You can study this programme from anywhere in the world and it offers the same academic rigour you would expect if you were studying on campus at University of Aberdeen but you can fit it around a busy life, work, other responsibilities and much more.

If have an engineering, science or mathematics degree and you are considering work in the oil and gas industry worldwide Petroleum Engineering can provide you with a wide range of knowledge and skills within the upstream oil and gas extraction area. The programme mainly focuses on the skills you need to extract oil which can be the initial geoscience knowledge through to core analysis and reservoir engineering. Within reservoir and well engineering there are several areas of analysis, testing and development you then specialise in. This ensures you have a very robust approach to offshore production with the type of advanced skills to problem solve and troubleshoot different situations.

The programme also develops your skills in formation evaluation, simulation, and appraisal plus safe production and enhancing the recovery of hydrocarbon oil and gas. This programme is highly regarded in the industry internationally and it is recognised by all major players in the oil and gas industry. Careers can be anything from Drilling, Operations, Piping Specification, Production, Reservoir, Subsurface and Wellhead Engineer. The degree hold accreditation from the Energy Institute and Institute of Mechanical Engineers

Courses listed for the programme

Find out more detail by visiting the programme web page

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1076/petroleum-engineering/

Why study at Aberdeen?

  • The programme is fully flexible to allow you to study wherever you are online
  • You will acquire skills and knowledge from a programme closely linked to industry needs
  • You study with a university situated in the heart of the European and world Energy Industry, many companies are located here
  • You study with two highly regarded departments in Geology and Engineering and at University of Aberdeen which is very well known in the oil and gas industry globally
  • You can pay by module and take the degree over a longer period up to six years

Where you study

  • Online Learning
  • 5 Months, 27 Months, or 30 Months
  • Part Time
  • September or January start

International Student Fees 2017/2018

Find out about fee on the programme page:

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1076/petroleum-engineering/

Scholarships

View all funding options on our funding database via the programme page

https://www.abdn.ac.uk/study/postgraduate-taught/finance-funding-1599.php

https://www.abdn.ac.uk/funding/

You may be also interested in the campus delivery of this programme:

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/222/petroleum-engineering/

Related Postgraduate Degrees

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/210/oil-and-gas-engineering/

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/249/process-safety/

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/283/reservoir-engineering/

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/935/safety-and-reliability-engineering/

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/288/safety-and-reliability-engineering-for-oil-and-gas/

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/317/subsea-engineering/



Read less
The modern society relies on the work of Chemical Engineers who develop and design the processes that make the useful products for the society by efficient use and management of resources including water and energy while controlling health and safety procedures and protecting the environment. Read more
The modern society relies on the work of Chemical Engineers who develop and design the processes that make the useful products for the society by efficient use and management of resources including water and energy while controlling health and safety procedures and protecting the environment.

Chemical Engineering provides essential tools based on the concept of sustainability and low carbon footprint for changing raw materials into useful products in a safe and cost effective way. Chemical Engineers understand how to alter the chemical, biochemical or physical state of a substance, to create everything from health care products (face creams, shampoo, perfume, drugs) to food (dairy products, cereals, agro-chemicals) and water (desalination for freshwater) to energy (petroleum to nuclear fuels).

Your study at MSc level at Bradford will be a foundation for life aimed at developing a deep understanding of advanced technical principles, analytical tools, and competence in their application together with a wide range of management, personal and professional skills. The course will provide you with essential tools based on the concept of sustainability and low carbon footprint for changing raw materials into useful products in a safe and cost effective way.

Why Bradford?

Flexibility of career path – Choice of three routes:
-Chemical Engineering - advanced chemical engineering and process technology skills for exciting and challenging careers in chemical and process industries
-Petroleum Engineering -matches the needs in different areas of oil and gas production and in medium/small operating and consulting companies
-Polymer Engineering - design and operation of processes to engineer materials with advanced properties leading to careers in diverse manufacturing sectors

Research Strengths - Internationally acclaimed research activities in the following areas:
-Chemical and Petrochemical Engineering
-Polymers
-Energy
-Water
-Pharmaceutical engineering
-Coating and advanced materials engineering

Rankings

Top Five: Chemical Engineering at the University of Bradford is ranked 5th in the UK in the Guardian University League Table 2017/

[[Modules
MSc Chemical & Petroleum Engineering (Chemical Engineering Background)
-Desalination Technology
-Materials & Manufacturing Processes
-Transport Phenomena
-Design Optimisation
-Computational Fluid Dynamics
-Upstream Production & Refinery Operations
-Research Skills
-Food & Pharmaceutical Processes Engineering
-Polymer Engineering
-Risk Management
-Engineering Computational Methods
-MSc Project

MSc Chemical & Petroleum Engineering (non-Chemical Engineering Background)
-Desalination Technology
-Transport Phenomena
-Chemical Engineering Practice
-Material & Manufacturing Processes
-Design Optimisation
-Computational Fluid Dynamics
-Upstream Production & Refinery Operations
-Research Skills
-Food & Pharmaceutical Processes Engineering
-Polymer Engineering
-Risk Management
-Engineering Computational Methods
-MSc Project

Career support and prospects

The University is committed to helping students develop and enhance employability and this is an integral part of many programmes. Specialist support is available throughout the course from Career and Employability Services including help to find part-time work while studying, placements, vacation work and graduate vacancies. Students are encouraged to access this support at an early stage and to use the extensive resources on the Careers website.

Discussing options with specialist advisers helps to clarify plans through exploring options and refining skills of job-hunting. In most of our programmes there is direct input by Career Development Advisers into the curriculum or through specially arranged workshops.

Read less
Process engineering often involves close collaboration between engineers and scientists from a variety of disciplines. Read more
Process engineering often involves close collaboration between engineers and scientists from a variety of disciplines. The Chemical Process Engineering MSc at UCL is specifically designed to facilitate this collaboration and provides graduates from a variety of engineering and science disciplines with the advanced training necessary to enter the chemical or biochemical industries.

Degree information

The programme covers core chemical engineering subjects alongside a wide range of options. Students choose either a research or an advanced design project. The advanced design project option is aimed at students who have not undertaken a design project during their undergraduate degree and eventually seek to become Chartered Engineers.

Students undertake modules to the value of 180 credits.

The programme consists of six optional modules (90 credits) and a project (90 credits).

Optional modules 1 (15 credits each) - students must choose three optional modules from the list below (45 credits in total).
-Advanced Process Engineering
-Advanced Safety and Loss Prevention
-Chemical Reaction Engineering II
-Electrochemical Engineering and Power Sources
-Energy Systems and Sustainability
-Fluid-Particle Systems
-Molecular Thermodynamics
-Nature Inspired Chemical Engineering
-Process Systems Modelling and Design (students taking this module must have passed the equivalent of Process Dynamics and Control in their first degree)
-Process Dynamics & Control
-Separation Processes
-Transport Phenomena II

Optional modules 2 (15 credits each) - students must choose three optional modules from the list below (45 credits in total).
-Advanced Bioreactor Engineering
-Environmental Systems
-Mastering Entrepreneurship
-Project Management
-Water and Wastewater Treatment

Research project/design project
All MSc students undertake either a Research Project (90 credits) or an Advanced Design Project (90 credits) that culminates in a project report and oral examination. Students who have already passed a Design Project module in their first degree cannot select the Advanced Design Project module.

Teaching and learning
The programme is delivered through a combination of lectures, tutorials, and individual and group activities. Invited lectures delivered by industrialists provide a professional and social context. Assessment is through written papers, coursework, a report on the research or design project and an oral examination.

Careers

Upon completion, our graduates can expect to play a major role in developing the technologies that make available most of the things that we use in everyday life and provide the expertise and technology to enhance our health and standard of living. These activities may involve the development of new materials, food processing, water treatment, pharmaceuticals, transport and energy resources as well as being at the frontline, addressing present environmental issues such as climate change.

Typical destinations of recent graduates include: Amec Process and Energy, British Petroleum, Royal Dutch Shell, National Grid, Health & Safety Executive. Career profiles of some of our recent MSc graduates are available on our website.

Top career destinations for this degree:
-Project Engineer, Global Energy
-Process Engineer, Nigerian National Petroleum Corporation
-Process Engineer, Petrofac
-Project Control Administrator, Mott MacDonald
-Project Engineer, Kinetics Process Systems Pte Ltd

Employability
Students gain in-depth knowledge of core chemical engineering subjects and of the advanced use of computers in process design, operation and management. They receive thorough training in hazard identification, quantification and mitigation, as well as in risk management and loss prevention, and also learn how to design advanced energy systems, with emphasis on sustainability, energy efficiency and the use of renewable energy sources. Students learn how to make decisions under uncertain scenarios and with limited available data and receive training on how to plan, conduct and manage a complex (design or research) project.

Why study this degree at UCL?

UCL Chemical Engineering, situated in the heart of London, is one of the top-rated departments in the UK, being internationally renowned for its outstanding research.

The programme is the first of its kind in the UK and is accredited by the Institution of Chemical Engineers (IChemE) as meeting IChemE's requirements for Further Learning to Master's Level. This recognition will fulfil an important academic qualification for MSc graduates with suitable first degrees in eventually becoming Corporate Members of IChemE.

Read less
There is still a shortage of qualified engineering specialists in the oil and gas sector, with skilled professionals enjoying competitive salaries. Read more

About the course

There is still a shortage of qualified engineering specialists in the oil and gas sector, with skilled professionals enjoying competitive salaries.

This programme trains specialist engineers in oilfield structural design, fabrication and installation. It is aimed both at engineering and physical science graduates who are interested in working in the oil and gas industry and practising professionals who wish to specialise in the design, analysis and construction of oil and gas installations.

Aims

With high demand for qualified oil and gas engineers, graduates enter a global job market and can expect exciting career prospects - a trend that looks likely to continue for years to come.

As the industry now seeks the rapid drilling and commissioning of new wells to meet energy demands, along with major investment in heavy oils and shale oil and gas, skilled engineers who can rapidly design and commission oilfield installations will be the backbone for growth in this industry. It is precisely this type of engineer that Brunel’s programme will develop.

A distinguishing feature of the course is its ambition to instil systems thinking, by treating structures and their operating environment holistically as a system – helping graduates develop the skills to address a wide range of complex engineering problems rapidly.

Course Content

The programme duration will be 12 months for full-time study, or 24 months for part-time.

The taught part of the programme will take place during the Autumn and Spring terms over 24 weeks. Students will be encouraged to start planning their dissertation at the beginning of the programme. During the Summer term, students will be expected to focus their effort on their dissertation project, researching the dissertation topic full-time. Part-time students will be allowed an extended period to execute their dissertation project in line with the overall programme duration. However, they will be expected to devote an equivalent of at least one day per week on their dissertation project.

This programme has been developed with extensive consultation with the industry. It will be delivered by Brunel staff members and by industrial specialists. The programme structure is shown below and comprises two parts:

Core modules: The taught part of the course (Part 1) worth 120 credits. This includes a set of compulsory modules that provides fundamentals of structural and process engineering, and focuses on providing an understanding of how to design oil and gas structures such as pipelines, offshore and onshore to withstand internal loading induced by complex internal flows of oil and gas and also external loads such as waves and wind. Throughout fundamental mathematical, computational, experimental, testing and inspection techniques as well as codes of practice are taken into account. Civil engineering and construction aspects are also taught.

Dissertation: Your dissertation project forms Part 2 of the programme and is worth 60 credits.

Full-time (12 months) MSc and PGDip modules include:

Petroleum Production Fundamentals
Applied Engineering Mathematics
Structural Materials
Structural Integrity and FEA
Multiphase Flow Fundamentals and Flow Assurance
Dynamics of Petroleum Structures
Design and Construction of Installations
Reliability Engineering and Risk Management

Term Three (MSc Only):

Dissertation
Students will conduct a major piece of research (c. 30,000 words) in an area of oil and gas engineering.

Delivery will take place in block mode teaching with each module requiring a week-long teaching schedule. Laboratory sessions will take place at specialist facilities in the week following the module delivery and will last for up to three days each.

Part-time (24 months) MSc and PGDip:

In the part-time mode, four taught modules are taken each year with the completion of the dissertation following in term three of the second year.

Full-time and part-time (12 and 24 months) PGCert:

Students must take the Design and Construction Installations and Petroleum Production Fundamentals modules and select any other two modules.

Work Placements

Brunel has a purpose built award-winning Professional Development Centre with over 30 staff, including specialist industry consultants. The Placement service includes CV writing, one-to-one guidance and mock interviews. Brunel was named ‘Best University Placement Service’ at the Rate My Placement Awards in 2012.

Teaching

Students are introduced to subject material, including key concepts, information and approaches, through a mixture of standard lectures and seminars, laboratory practicals, self-study and individual research reports. Supporting material is available online. The aim is to challenge students and inspire them to expand their own knowledge and understanding.

Preparation for work is achieved through the development of 'soft' skills such as communication, planning, management and team work.
In addition, guest speakers from industries will provide a valuable insight into the real world of the oil and gas sector.

Many elements of coursework involve, and reward, the use of initiative and imagination. Some of the projects may be linked with research in the College's research institutes.

Assessment

Each module is assessed either by formal examination, written assignments and laboratories or a combination of these. Cut-off dates for receipt of assignments are specified at the beginning of the academic year. Examinations are normally taken in December and May.

Special Features

Students will be able to access laboratory facilities at the recently formed NSIRC site which are extensive, modern and well equipped.

Although we recruit a large number of highly qualified students to our undergraduate, postgraduate and research degrees each year, we don’t forget that you are an individual. From the beginning of your time here, you are allocated a personal tutor who will guide you through academic and pastoral issues.

The College is research intensive as our academics are actively involved in cutting-edge research. Much of this research is undertaken with collaborators outside the University, including leading oil and gas companies, construction companies, water utilities, and other leading industrial firms. We work with universities in China, Poland, Egypt, Turkey, Italy, Denmark and Japan. This research is fed directly into our courses, providing a challenging investigative culture and ensuring that you are exposed to up-to-date and relevant material throughout your time at Brunel.

We have excellent links with business and industry in the UK and overseas. This means:
Brunel degrees are designed to meet the needs of industry and the market-place;
The latest developments in the commercial world feed into your course;
You have greater opportunity at the dissertation stage of conducting a dissertation in industry;
We have more contacts to help you find a job when you graduate.

Accreditation

This course has been designed and developed in close consultation with industry and the Oil and Gas Engineering MSc is accredited by the Institute of Materials, Minerals and Mining (IOM3). We are seeking accreditation with the following professional bodies:

Institution of Mechanical Engineers
Society of Petroleum Engineers
Institution of Chemical Engineers

Read less
Overview. Many engineering projects are now undertaken by multidisciplinary teams who are responsible for the whole project life cycle in a multi-project or programme management environment. Read more

Overview

Many engineering projects are now undertaken by multidisciplinary teams who are responsible for the whole project life cycle in a multi-project or programme management environment. Typically, these projects are becoming increasingly complex. As a result, team members are expected to have a range of project management skills, including contractual knowledge, financial engineering competency and strategic awareness.

This programme allows you to develop your knowledge of the entire project management process, from inception and feasibility, engineering, procurement and implementation through to commissioning and operation. Particular emphasis is placed on financial, planning and management aspects of the project life cycle, to equip you with the range of skills you’ll need to make a major contribution at every stage of a project.

We have all the specialist software you’ll need for your programme, and you’ll have access to a dedicated study suite for Masters students.

Accreditation

This degree is accredited by the Joint Board of Moderators as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a partial CEng accredited undergraduate first degree.

This course is also accredited by EUR-ACE, the European quality label for engineering degree programmes at Bachelor and Master level.

Course content

You’ll gain a thorough understanding of a range of topics affecting how construction and engineering projects are managed. In addition to the tools and techniques that are used by project managers, you’ll examine the issues and challenges they currently face and consider them in a “whole life project” context. You’ll look at topics such as project cash flow, risk management, project appraisals and stakeholder relationship management among many others.

You’ll also focus on key topics such as project funding, especially for major infrastructure projects, as well as procurement management and supply chain issues. The process of value engineering, the concepts of value management and risk management will also be covered in depth.

Over the summer months you’ll work with your supervisor to complete your independent research project – a chance to demonstrate the knowledge and skills you’ve gained and perhaps specialise in an area that relates to your career ambitions.

Want to find out more about your modules?

Take a look at the Engineering Project Management module descriptions for more detail on what you will study.

Course structure

Compulsory modules

  • International Construction Management and Engineering/ Engineering Project Management Dissertation 60 credits
  • Project Management 15 credits
  • Advanced Project Management 15 credits
  • Strategic Management in Construction 15 credits
  • Funding for Projects 15 credits
  • Risk Management 15 credits
  • Procurement Management 15 credits
  • Value Management 30 credits

For more information on typical modules, read Engineering Project Management MSc(Eng) Full Time in the course catalogue

For more information on typical modules, read Engineering Project Management MSc(Eng) Part Time in the course catalogue

Learning and teaching

Our ground breaking research feeds directly into teaching, and you’ll have regular contact with staff who are at the forefront of their disciplines. You’ll have regular contact with them through lectures, seminars, tutorials, small group work and project meetings.

Independent study is also important to the programme, as you develop your problem-solving and research skills as well as your subject knowledge.

Assessment

You’ll be assessed using a range of techniques including case studies, technical reports, presentations, in-class tests, assignments and exams.

Projects

The dissertation project is one of the most satisfying elements of this course. It allows you to apply what you’ve learned to a piece of research focusing on a real-world problem, and it can be used to explore and develop your specific interests.

Most projects are experimentally based and linked with companies within the oil and gas industry to ensure the topic of research is relevant to the field whilst also addressing a real-world problem.

Career opportunities

Many of our previous graduates now work as project managers for construction companies, in consultancy or for large client organisations. Alternatively, you may choose to continue to work as an engineer or general manager, but with increased input into the project work of an organisation.

Graduates have gone on to find work with companies such as Arup, British Nuclear Fuels, KPMG (Major Projects Advisory), Laing O’Rourke, MNHD, Nexen Petroleum, Petrochem Kazakhstan, Seplat Petroleum Development Company and Sir Robert McAlpine.

Careers support

You’ll have access to the wide range of engineering and computing careers resources held by our Employability team in our dedicated Employability Suite. You’ll have the chance to attend industry presentations book appointments with qualified careers consultants and take part in employability workshops. Our annual Engineering and Computing Careers Fairs provide further opportunities to explore your career options with some of the UK’s leading employers.

The University's Careers Centre also provide a range of help and advice to help you plan your career and make well-informed decisions along the way, even after you graduate. Find out more at the Careers website.



Read less
This course is mainly for engineering students from the UK and overseas who want to develop careers in the oil, gas, process and chemical industries. Read more

Why this course?

This course is mainly for engineering students from the UK and overseas who want to develop careers in the oil, gas, process and chemical industries. The course has a strong project-based approach and is relevant to the recruitment needs of a wide range of employers.

It meets accreditation requirements for the Institute of Chemical Engineers allowing graduates to apply for chartered engineer status.

Our course is one of the few MSc programmes to offer the module Safety Management Practices. It offers exposure to best industry practice and much required industrial training.

See the website https://www.strath.ac.uk/courses/postgraduatetaught/advancedchemicalprocessengineering/

You’ll study

This is a modular course. To gain the Postgraduate Certificate you need to pass six modules.

The Diploma requires eight taught modules and a group project.

The MSc requires eight taught modules, a group design project and an individual research project. You'll work with our talented team of researchers on chemical engineering issues of the future.

The key areas of the programme are:
Chemical & Process Engineering:
- process design principles
- safety management practices
- energy systems
- colloid engineering
- multi-phase processing
- petroleum engineering
- environmental control technologies
- process safety design
- emerging technologies
- programming & optimisation

Multidisciplinary Skills:
- project management
- risk management
- information management
- understanding financial information

If you want to study the same scope of subjects but be part a sustainable engineering programme, you should apply for the MSc Sustainable Engineering: Chemical Processing pathway.

You’ll work on an individual research project with our highly talented team of leading researchers on chemical engineering issues of the future.

Facilities

We're one of the largest chemical engineering departments in the country.
We have new state-of-the-art research laboratories. These include experimental facilities for light scattering, spectroscopy, adsorption measurements and high pressure viscometry.
You'll have access to the department's own dedicated computer suite which is installed with industry standard software.

Accreditation

The course meets accreditation requirements for the Institute of Chemical Engineers allowing graduates to apply for chartered engineer status.

Guest lecturers

In the Emerging Technologies modules you’ll benefit from external speakers who are leading practitioners in their field.

Learning & teaching

All classes are delivered over a twelve week period.
The Emerging Technologies module makes extensive use of external speakers who are leading practitioners in their field.
The Safety Management Practices module offers exposure to best industry practice and is one of a few MSc programmes to offer much required industrial training.

Assessment

Assessment is through a balanced work load of class based assessment, individual and group based projects and exams.

Careers

There is growing demand for high-calibre graduates who can develop and apply advanced process technologies in chemical and process industries.

Some students may be eligible to apply for PhD places in the department and across the Engineering faculty.

How much will I earn?

- The average graduate starting salary for a chemical engineer is £28,000*.
- The average salary for chemical engineers with experience is £53,000*.
- Chartered chemical engineers can earn £70,000* plus.

*Information is intended only as a guide.

Read less
IN BRIEF. Flexible but rigorous period of study for graduates working in, or intending to work in, the natural gas/oil industry. Accredited by the Institution of Gas Engineers and Managers (IGEM). Read more

IN BRIEF:

  • Flexible but rigorous period of study for graduates working in, or intending to work in, the natural gas/oil industry
  • Accredited by the Institution of Gas Engineers and Managers (IGEM)
  • Excellent employment prospects
  • Part-time study option
  • International students can apply

COURSE SUMMARY

A comprehensive range of subjects is studied covering the whole spectrum of natural gas engineering, providing a sound base from which to select an area of specialised study.

You may also be eligible for membership of the Gas Engineering and Management Institute and subsequently become a Chartered Engineer. Alternatively you may wish to continue your studies to PhD level, researching gas engineering or other related subjects available within the School of Computing, Science & Engineering.

COURSE STRUCTURE

Duration:

September intake

MSc (one year full-time or two years part-time)

PgDip (nine months full-time or one year and six months part-time)

January intake

MSc (one year and four months full-time or two years and eight months part-time)

PgDip (one year full-time or two years part-time)

TEACHING

Teaching will take the form of traditional lectures in a class room, with PowerPoint presentations and videos and reference to laboratory work, demonstrations, workshops and tutorials and use of specialised software as applicable.

ASSESSMENT

Coursework and labs – 30%

Examinations – 70%

Plus Dissertation

EMPLOYABILITY

Graduates pursue a variety of careers in the natural gas/oil industry. The programme covers all aspects of gas technology and associated gas business management and will enable students to increase their skills and technical knowledge.

FURTHER STUDY

You may want to go on to further study with our Engineering 2050 Research Centre as part of the Spray Research Group.

The Spray Research Group is specialised in the production of sprays, atomiser design and turbulent spray structures. The group has a wide variety of experience in applying experimental and computational modelling techniques, utilising state-of-the-art facilities to fundamental and industrial and commercial applications of sprays, the design of atomisation devices and Petroleum Technology. We have a wide variety of experience in applying experimental and simulation modelling techniques, utilising state-of-the-art facilities to fundamental and industrial and commercial applications of Petroleum Technology.

Our expertise also extends to fluid mechanical and instrumentation related research and devoplment in the covers the production of sprays, the structures of sprays and interaction with fluid/boundary interactions, mixing, vaporization and combustion.

Research areas include: 

  • Reservoir simulation modelling
  • Smart well technology
  • Drilling technologies
  • Enhanced oil recovery (EOR)
  • Internal and external fluid flow modelling of production facilities
  • Gas processing and transportation (GTL)


Read less
Your programme of study. Read more

Your programme of study

Have you ever wanted to invent something mechanical, prevent environmental damage to a building from floods, fire, explosions, landslides and other natural disasters, understand risks and reliability across buildings, renewables, and other areas? Do you want to improve quality of life across environmental remediation, farming, smart grid, green technology, food production, housing, transportation, safety, security, healthcare and water? Do you find it fascinating to try to make things work from what you have available? There will be plenty of major challenges to get involved with in the coming years crossing over into Nano technologies, advanced materials, electronic printing, grapheme technologies, wearable's, 3d printing, renewables and recycling and biotechnologies. Technology now means that you can design and engineer from anywhere in the world, including your home. Advanced Mechanical Engineering looks at computational mechanics, response to materials and reliability engineering. The Victorians set up some of the most advanced mechanical engineering of our times and in many ways they were the biggest mechanical engineering innovators ever.

This programme specialises in mechanical engineering so you are becoming proficient in designing anything that has background moving parts to allow it to work such as engines, motor driven devices and the effects of nature on mechanical objects and their ability to perform. You also look at how material composition can alter performance issues and provide new innovative methods to solve challenges in every day life and natural and other risks to machinery in all situations.  Your employment options are very varied, you may want to work within consumer goods to design and improve everyday objects like white goods, or you may like to be involved in very large scale hydro electric and power driving machinery in energy , manufacturing or large scale developments, or you may decide to get involved in innovation and enterprise yourself.

Courses listed for the programme

SEMESTER 1

Compulsory Courses

Computational Fluid Dynamics

Numerical Simulation of Waves

Advanced Composite Materials

Optional Courses

Fire and Explosion Engineering

Structural Dynamics

SEMESTER 2

Compulsory Courses

Finite Element Methods

Mathematical Optimisation

Engineering Risk and Reliability Analysis

Optional Courses

Project Management

Risers Systems Hydrodynamics

Renewable Energy 3 (Wind, Marine and Hydro

SEMESTER 3

Project

Find out more detail by visiting the programme web page;

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1037/advanced-mechanical-engineering/

Why study at Aberdeen?

  • Your skills and knowledge can have huge application potential within newly disruptive industries affecting life and work
  • You can improve employability in Aerospace, Marine, Defences, Transport Systems and Vehicles
  • Some of the knowledge you build directly relates to industries in Aberdeen such as the energy industry.
  • Mechanical Engineering cuts into high growth Industry 4.0 and IOT related areas across many areas disrupted by climate, population growth, and quality of life
  • We ensure close links with industries to attend industry events, visits and teaching by professionals from the industry
  • Graduates are very successful and many work in senior industry roles

Where you study

  • University of Aberdeen
  • 12 Months Full Time
  • September start

International Student Fees 2017/2018

Find out about fees:

https://www.abdn.ac.uk/study/international/tuition-fees-and-living-costs-287.php

*Please be advised that some programmes have different tuition fees from those listed above and that some programmes also have additional costs.

Scholarships

View all funding options on our funding database via the programme page

https://www.abdn.ac.uk/study/postgraduate-taught/finance-funding-1599.php

https://www.abdn.ac.uk/funding/

Living in Aberdeen

Find out more about:

  • Your Accommodation
  • Campus Facilities
  • Aberdeen City
  • Student Support
  • Clubs and Societies

Find out more about living in Aberdeen: - abdn.ac.uk/study/student-life

Other engineering disciplines you may be interested in:

Global Subsea Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1070/global-subsea-engineering/

Subsea Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1082/subsea-engineering/

Oil and Gas Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1074/oil-and-gas-engineering/

Oil and Gas Structural Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/217/oil-and-gas-structural-engineering/

Petroleum Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/222/petroleum-engineering/

Renewable Energy Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1077/renewable-energy-engineering/

Reservoir Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/283/reservoir-engineering/

Safety and Reliability Engineering

https://www.abdn.ac.uk/study/postgraduate-taught/degree-programmes/1078/safety-and-reliability-engineering/



Read less
An oil and gas engineer is involved in nearly all stages of oil and gas field evaluation, development and production. The aim is to maximise hydrocarbon recovery at minimum cost while maintaining a strong emphasis on reducing environmental impact. Read more
An oil and gas engineer is involved in nearly all stages of oil and gas field evaluation, development and production. The aim is to maximise hydrocarbon recovery at minimum cost while maintaining a strong emphasis on reducing environmental impact. The range of employment opportunities for students who hold an MSc oil & gas Engineering is very wide. Once you have completed your MSC in Oil & Gas Engineering, you will be equipped with skills and knowledge that enable you to solve future tasks and challenges related to the development and production of oil and gas fields. There are great work opportunities within the traditional as well as the future oil industry. Possible work places include National and international oil companies, consultancy firms and service providers. A completed study also forms a good basis for a future career as a researcher.

You will receive guidance and support from staff that have specialised in the discipline of oil & gas, fire science and energy for many years. All the staff involved in this course are committed to meeting your expectations. However, in turn there are certain expectations of you, as studying at this level requires you to demonstrate that you have the mental capacity, self-motivation and commitment to achieve this award.

Teaching methods include lectures, seminars, workshops, laboratory work, project work, case studies, site visits. The mix of teaching methods is designed to motivate, challenge students considering different learning styles to maximise their potential. Personal study also forms an integral part of the course. The students will learn by a variety of methods including innovative information and communication technologies and practical case studies based on research outcomes achieved by the School staff.

INDUSTRY LINKS

The course is supported by an Industrial Liaison Group which reviews and provide input into the development of the course in order to ensure that it meets the needs of the oil and gas industry. Our Industrial partners also contribute to some teaching through guest lecturers, CPD events, and research projects. Invited lectures were done by representatives from Energy Institute, Institution of Fire Engineers, Shell, BP, GexCon, Fire and Rescue Services, Tyco, BRE, Horea Lea, Carbon Trust, Government Office for the North West and others.

LEARNING ENVIRONMENT AND ASSESSMENT

The course will be delivered through lectures, tutorials and practical exercises. Guided teaching and formal assessments will enhance the development of transferable skills such report-writing, maintenance of case notes, formal presentations, participation in discussions, ability to work to deadlines, computing skills, public speaking, scientific analysis, adherence and development of laboratory protocols and research methods.

There are different assessment methods employed across the modules. Some modules are assessed by both examination and coursework while others are assessed by coursework only, which may take the form of group projects, modelling exercises or time-controlled assignments or seminar presentations.

OPPORTUNITIES

The range of employment opportunities for students who hold MSc Oil & Gas Engineering is very wide.

By completing Masters in Oil & Gas Engineering, you will learn skills and knowledge that enable you to solve upcoming responsibilities and challenges related to the petroleum industry. There are great work opportunities within the oil and gas industry. Possible work places include national and international oil companies, consultancy companies and oil and gas service firms.

Many of our students have progressed into either further higher study at the PhD level, or full-time employment within national and international organisations, consultancy or servicing companies.

Read less
This course is suited to those with an eye for materials, material structure and material mechanics. Our course aims to extend your understanding of the core disciplines of civil engineering and widen your professional scope to include expertise in geotechnical engineering. Read more

Why take this course?

This course is suited to those with an eye for materials, material structure and material mechanics.

Our course aims to extend your understanding of the core disciplines of civil engineering and widen your professional scope to include expertise in geotechnical engineering. From ground investigations to soil structure testing, you will gain the analytical and technical skills required to make informed decisions when faced with the complex geotechnical problems of construction projects.

What will I experience?

On this course you can:

Attend lectures and seminars given by practitioners from client, contracting and consulting organisations
Gain experience of environmental assessment techniques plus a range of other skills such as mapping using GIS, GPS and remote sensing technologies
Opt to study overseas at a variety of European universities through the ERASMUS exchange scheme

What opportunities might it lead to?

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a Accredited CEng (Partial) BEng (Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

Here are some routes our graduates have pursued:

Civil engineering
Mining companies
Petroleum companies
The military
Consultancy

Module Details

The course is divided into three stages, the first two stages are generally taught through formal tuition, with stage three covering independent research in an academic or industrial setting.

You will build upon established fundamental civil/construction engineering and project management principles in order to confidently apply them to a range of complex construction project problems with due regard to related geotechnical factors.

Here are the units you will study:

Environmental Management for Civil Engineering: This unit introduces you to the main environmental issues associated with civil engineering projects and how they are considered and mitigated in the Environmental Assessment process.

Civil Engineering Science: In this unit you will study integrated topics of analytical structural analysis, numerical analysis and solving engineering problems. Whilst being an introduction to the finite element method (FEM) and application of FEM software packages, this unit aims to give you the ability to solve engineering problems in the design of real structures.

Geotechnical Engineering Design Project: This unit gives you an opportunity to simulate the design activities of a civil engineering consultancy. Project briefs are typically drawn from the work of professional contacts in the civil engineering industry. You will be required to make professional contacts, obtain advice and guidance, carry out research and conduct site visits outside the University.

Strategic and General Management: You will cover management in the construction industry, and the development of organisational and project strategic direction, taking into account internal and external environments.

Independent Research Project: This covers the generic research framework within which new knowledge is discovered, and involves the practical application of research skills and techniques to a chosen system within the construction industry.

Programme Assessment

Teaching on this course will focus on small lectures, seminars and discussion groups. It will also centre on supporting your independent learning strategies, which tutorials will help to develop.

Assessment can take many forms and is geared towards the subject matter in a way that encourages a deeper understanding and allows you to develop your skills. It includes:

Examinations
Coursework
Projects
A dissertation

Student Destinations

This course is designed to equip you with knowledge, skills and competencies that employers in the construction industry expect. Alongside the technical topics, you will develop commercial and interpersonal skills required of construction industry professionals.

There is currently a huge demand for geotechnical engineering specialists within the civil engineering sector. This fact, combined with the vocational nature of this course and the extensive training you will receive, means that you are likely to quickly find employment in the industry. Potential roles will include geotechnical engineers, mining engineers and tunnelling engineers for major mining companies, as well as environmental and geotechnical consultancies.

Overall, the delivery of this course and its opportunities for you to interact with the industry throughout your studies means the employment rate of our civil engineering graduates is excellent.

Read less
Effective use of renewable energy and improvements in the efficiency of power generation facilities will enable better energy management in the future and help reduce environmental impact. Read more

Why take this course?

Effective use of renewable energy and improvements in the efficiency of power generation facilities will enable better energy management in the future and help reduce environmental impact. This course responds to an urgent need for specialists in energy and power systems management, as well as a growing skills shortage of people with core knowledge in this field.

The course provides relevant, up-to-date skills that will equip both graduates and working professionals in the advanced concepts of sustainable electrical power and energy generation. It offers skills for operation, control, design, regulation and management of power systems and networks of the future. You will also receive training in and understanding of energy production, delivery, consumption and efficiency.

What will I experience?

On this course you will:

Benefit from experts in the industry who will deliver part of the course as visiting lecturers, bringing professional expertise and industry-relevant material
Be encouraged to reach a level of competence and professionalism where you can effectively integrate your technical and non-technical knowledge to solve a range of problems of a complex nature
Learn in a challenging and stimulating study environment
Develop a range of key skills by means of opportunities provided in the study units
Being an MSc course, you are encouraged and expected to be able to reach a level of competence and professionalism where you can effectively integrate your technical and non-technical knowledge to solve a range of problems of a complex nature.

What opportunities might it lead to?

The course will help to maximise your career potential in this field and equips you to work as an engineer, at an advanced level, in the fields of energy and power systems management.

Module Details

You will study several key topics and complete a four-month individual project in which you apply your knowledge to a significant, in-depth piece of analysis or design. Projects are tailored to your individual interests and may take place in our own laboratories or, by agreement, in industry. Experts from Industry (STS Nuclear) deliver part of the course as visiting lecturers, bringing professional expertise and industry-relevant material to the programme.

Here are the units you will study:

Power Systems Technology: This unit provides an in-depth overview of contemporary electrical power systems. It covers the elements of electrical power systems including generation, transmission and distribution in the mixed energy source paradigm.

Electrical Machines and drives: Provides an in-depth overview of the operational principles and physical design of DC and AC electrical machines as well as broad understanding of concepts of power electronics and power electronic converters, so that you can describe their application and selection criteria. You will develop an understanding of the issues present in converter design, including the impact of physical layout and heat dissipation.

Energy Systems: Focuses on the techniques and principles of operation of thermodynamics and combustion systems, as well as the provision and management of energy. It also focuses on power generation and combined systems, BioMass processers application of heat and fluid transfer.

Renewable and Alternative Energy: Provides an in-depth coverage of the principles of renewable and alternative energy systems: Winds, Solar, BioMass, Geothermal, Fuel Cells, Hydrogen Technologies and Nuclear Energy.

Nuclear Technology: A study of nuclear engineering including the theory of atomic and nuclear physics, methods and benefits of generating electricity from nuclear power plants, and the effects of ionising radiation. The nuclear fuel cycle and the associated environmental impacts are also considered. The development of international guidance on nuclear and radiological safety and a comparison of national regulatory structures are analysed. The importance of safety cultures, safety behaviours and safety cases is a key element throughout this module.

Energy Management: The unit is specifically designed to provide the students with the basic of economical analysis and evaluation of energy projects and asset management as well as risk and hazard assessment, comprising legislation, hazard identification and quantification, quantified risk analyses, methods of elimination/mitigation, economic appraisal of integrated renewable, and petroleum projects; with numerous pertinent case studies.

Programme Assessment

You will be taught through a mixture of lectures, seminars, tutorials (personal and academic), laboratory sessions and project work. The course has a strong practical emphasis and you will spend a significant amount of time in our Energy, Power systems and Electronic laboratories.

A range of assessment methods encourages a deeper understanding of engineering and allows you to develop your skills. Here’s how we assess your work:

Written examinations
Coursework
Laboratory-based project work
A major individual project/dissertation

Student Destinations

This course is designed to respond to a growing skills shortage of people with core knowledge in energy and power systems management. It is an excellent preparation for a successful career in this ever expanding and dynamic field.

On successful completion of the course, you will have gained the skills and knowledge that will make you attractive to a wide variety of employers with interests ranging from overall system design to the more detailed development of subsystems. You will acquire the ability to critically evaluate methodologies, analytical procedures and research methods in energy and power systems management and in the use of state-of-the-art computational tools, the design of sustainable electrical power systems and networks and regulatory frameworks. For practicing engineers with professional business experience, the course is an opportunity to update your knowledge of current design practice and also to familiarise themselves with developments in codes and methods of analysis.

Read less

Show 10 15 30 per page



Cookie Policy    X