• Swansea University Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Leeds Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • University of York Featured Masters Courses
  • University of Glasgow Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
De Montfort University Featured Masters Courses
University of Birmingham Featured Masters Courses
University of Leeds Featured Masters Courses
University of Leeds Featured Masters Courses
University of Kent Featured Masters Courses
"operating" AND "systems"…×
0 miles

Masters Degrees (Operating Systems)

  • "operating" AND "systems" ×
  • clear all
Showing 1 to 15 of 222
Order by 
Take advantage of one of our 100 Master’s Scholarships or College of Science Postgraduate Scholarships to study High Performance and Scientific Computing at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Read more
Take advantage of one of our 100 Master’s Scholarships or College of Science Postgraduate Scholarships to study High Performance and Scientific Computing at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Postgraduate loans are also available to English and Welsh domiciled students. For more information on fees and funding please visit our website.

The MSc in High Performance and Scientific Computing is for you if you are a graduate in a scientific or engineering discipline and want to specialise in applications of High Performance computing in your chosen scientific area. During your studies in High Performance and Scientific Computing you will develop your computational and scientific knowledge and skills in tandem helping emphasise their inter-dependence.

On the course in High Performance and Scientific Computing you will develop a solid knowledge base of high performance computing tools and concepts with a flexibility in terms of techniques and applications. As s student of the MSc High Performance and Scientific Computing you will take core computational modules in addition to specialising in high performance computing applications in a scientific discipline that defines the route you have chosen (Biosciences, Computer Science, Geography or Physics). You will also be encouraged to take at least one module in a related discipline.

Modules of High Performance and Scientific Computing MSc

The modules you study on the High Performance and Scientific Computing MSc depend on the route you choose and routes are as follows:

Biosciences route (High Performance and Scientific Computing MSc):

Graphics Processor Programming
High Performance Computing in C/C++
Operating Systems and Architectures
Software Testing
Programming in C/C++
Conservation of Aquatic Resources or Environmental Impact Assessment
Ecosystems
Research Project in Environmental Biology
+ 10 credits from optional modules

Computer Science route (High Performance and Scientific Computing MSc):

Graphics Processor Programming
High Performance Computing in C/C++
Operating Systems and Architectures
Software Testing
Programming in C/C++
Partial Differential Equations
Numerics of ODEs and PDEs
Software Engineering
Data Visualization
MSc Project
+ 30 credits from optional modules

Geography route (High Performance and Scientific Computing MSc):

Graphics Processor Programming
High Performance Computing in C/C++
Operating Systems and Architectures
Software Testing
Programming in C/C++
Partial Differential Equations
Numerics of ODEs and PDEs
Modelling Earth Systems or Satellite Remote Sensing or Climate Change – Past, Present and Future or Geographical Information Systems
Research Project
+ 10 credits from optional modules

Physics route (High Performance and Scientific Computing MSc):

Graphics Processor Programming
High Performance Computing in C/C++
Operating Systems and Architectures
Software Testing
Programming in C/C++
Partial Differential Equations
Numerics of ODEs and PDEs
Monte Carlo Methods
Quantum Information Processing
Phase Transitions and Critical Phenomena
Physics Project
+ 20 credits from optional modules

Optional Modules (High Performance and Scientific Computing MSc):

Software Engineering
Data Visualization
Monte Carlo Methods
Quantum Information Processing
Phase Transitions and Critical Phenomena
Modelling Earth Systems
Satellite Remote Sensing
Climate Change – Past, Present and Future
Geographical Information Systems
Conservation of Aquatic Resources
Environmental Impact Assessment
Ecosystems

Facilities

Students of the High Performance and Scientific Computing programme will benefit from the Department that is well-resourced to support research. Swansea physics graduates are more fortunate than most, gaining unique insights into exciting cutting-edge areas of physics due to the specialized research interests of all the teaching staff. This combined with a great staff-student ratio enables individual supervision in advanced final year research projects. Projects range from superconductivity and nano-technology to superstring theory and anti-matter. The success of this programme is apparent in the large proportion of our M.Phys. students who seek to continue with postgraduate programmes in research.

Specialist equipment includes:

a low-energy positron beam with a highfield superconducting magnet for the study of positronium
a number of CW and pulsed laser systems
scanning tunnelling electron and nearfield optical microscopes
a Raman microscope
a 72 CPU parallel cluster
access to the IBM-built ‘Blue C’ Supercomputer at Swansea University and is part of the shared use of the teraflop QCDOC facility based in Edinburgh

The Physics laboratories and teaching rooms were refurbished during 2012 and were officially opened by Professor Lyn Evans, Project Leader of the Large Hadron Collider at CERN. This major refurbishment was made possible through the University’s capital programme, the College of Science, and a generous bequest made to the Physics Department by Dr Gething Morgan Lewis FRSE, an eminent physicist who grew up in Ystalyfera in the Swansea Valley and was educated at Brecon College.

Read less
The Systems Engineering Management MSc has been specifically designed for the needs of engineering professionals working in the field of complex systems development. Read more
The Systems Engineering Management MSc has been specifically designed for the needs of engineering professionals working in the field of complex systems development. The programme encompasses not only the technical tools and approaches needed to build success in this area, but also the management dimension of the relevant processes.

Degree information

Students gain an integrated, interdisciplinary view of complex systems and an advanced understanding of the systems engineering process. They gain the ability to apply this process to a variety of real world situations and the management skills necessary to facilitate the development of complex systems on time and within budget.

Students undertake modules to the value of 180 credits.

The programme consists of four core taught modules (60 credits) two optional taught modules (30 credits) and three research modules (90 credits). Modules are generally taught as intensive five-day 'block weeks' to minimise time away from the office.

A Postgraduate Diploma (120 credits, full-time nine months, or flexible study up to five years) is offered. A Postgraduate Certificate (60 credits, full-time 12 weeks, or flexible study up to two years) is offered.

Core modules
-Systems Engineering Management
-Lifecycle Management
-Risk, Reliability, Resilience
-The Business Environment

Optional modules
-Defence Systems
-Environmental Systems*
-Project Management
-Rail Systems
-Spacecraft Systems
-Systems Design
-Systems, Society, Sustainability*

*These modules are delivered by UCL's Department of Civil, Environmental and Geomatic Engineering in ten half-day sessions over the course of a term instead of the usual intensive 'block week' format

Research modules - all MSc students undertake a structured research programme comprising the following mandatory modules:
-Systems Engineering in Practice (15 credits)
-Systems Engineering Project Concept (15 credits)
-Systems Engineering Research Project (60 credits)

Teaching and learning
The programme is delivered through a combination of lectures, discussion sessions, workshop activity, and project work. Each taught course will be separately assessed through a combination of course work and a written examination. The project will be assessed through written dissertation and subsequent oral examination.

Careers

Complex systems are commonplace in many branches of UK industry including rail, aerospace, defence, and manufacturing. The ability to create such systems effectively is crucial to the competitiveness of these industries and has a direct bearing on the wealth of the nation.

Recent graduates of the programme have the following careers:
-London Underground: Head of Railway Systems
-Accenture: Analyst
-Thales Aerospace: Design Authority Manager
-BAE Systems: Systems Design Authority
-Selex Sensors and Airborne Management: Engineering Lead
-Xerox: Engineering Manager
-QinetiQ: Marine Engineer
-BAE Systems: Senior Hardware Engineer
-British Aerospace: Software Engineer
-Orange: Principal Engineer
-Halcrow Group Limited: Design Manager

Top career destinations for this degree:
-Software Engineer, Bank of America Merrill Lynch
-Analyst, Accenture
-Proposals engineer, Invensys PLC
-Engineering Manager, BAE Systems
-Systems Engineer, BIG

Why study this degree at UCL?

This MSc combines academic rigour with the practical expertise exemplified by our collaborators in UK industry and government. The flexible programme enables participants to structure their studies to suit their own career goals, and is accredited by the IET as a programme of further learning for registration as a Chartered Engineer.

Lectures are presented by experts in the field, many of whom have engaged in the practice of systems engineering in industry.

Industry is operating in an environment where technology changes rapidly, and where global competition grows ever more intensive. The challenge to remain competitive means we must make the right thing at the right price. Our MSc equips graduates with the skills to meet this challenge.

Read less
The 1-year Electrical Power Systems Masters/MSc is good, the 2-year Electrical Power Systems with Advanced Research Masters/MSc is even better!. Read more
The 1-year Electrical Power Systems Masters/MSc is good, the 2-year Electrical Power Systems with Advanced Research Masters/MSc is even better!

The 3rd energy industry revolution is taking place where the key is the development of electrical power systems in the contexts of smart grids. Electrical power systems are playing a pivotal role in the development of a sustainable energy supply, enabling renewable energy generation. Globally there is a big shortage of skilled engineers for designing, operating, controlling and the economic analysis of future electricity networks – smart grids

The new 2-year MSc Electrical Power Systems with Advanced Research will give you the timely advanced skills and specialist experience required to significantly enhance your career in the electrical power industry. The programme builds on a very close involvement with the power industry, the education of power engineers and extensive research work and expertise as well as the successful experience on the 1-year MSc Electrical Power Systems at the University of Birmingham. The 2-year MSc Electrical Power Systems with Advanced Research will be able to fill in the gap of skills between the 1-year MSc and PhD research.

Some modules will be taught by leading industry experts, which will give you the exciting opportunity to understand the real challenges that power industry is facing, hence propose innovative solutions. In addition, students working on relevant MSc projects may have the opportunity to work with leading industry experts directly.

The new 2-Year MSc Electrical Power Systems with Advanced Research will run in parallel with the existing 1-Year MSc Electrical Power Systems. The taught credits in the 1st year of the 2 Year MSc are identical to that of the 1-Year MSc while the 2nd Year is mainly focused on a research project.

This programme also aims to provide graduates with the ability to critically evaluate methodologies, analytical procedures and advanced research methods. Year 1 of the programme is focussed on the taught modules covering:

Control concepts and methods
Advanced energy conversion systems and power electronic applications
Advanced power electronic technologies for electrical power networks – HVDC and FACTS
Electrical power system engineering - using state-of-the-art computational tools and methods, and design of sustainable electrical power systems and networks
Economic analysis of electrical power systems and electricity markets.
While Year 2 of the programme will give you the opportunity to work on an advanced research project. For some suitable projects, in conjunction with joint industry supervisions, industry placement may be available.

It is envisaged there will be the opportunity for students to transfer between the two programmes using the University’s procedures for transfers between programmes, subject to programme requirements. This opportunity would take place at the end of the taught part of the programme.

About the School of Electronic, Electrical & Systems Engineering

Electronic, Electrical and Systems Engineering, is an exceptionally broad subject. It sits between Mathematics, Physics, Computer Science, Psychology, Materials Science, Education, Biological and Medical Sciences, with interfaces to many other areas of engineering such as transportation systems, renewable energy systems and the built environment.
Our students study in modern, purpose built and up to date facilities in the Gisbert Kapp building, which houses dedicated state-of-theart teaching and research facilities. The Department has a strong commitment to interdisciplinary research and boasts an annual research fund of more than £4 million a year. This means that wherever your interest lies, you can be sure you’ll be taught by experts in the field.

Funding and Scholarships

There are many ways to finance your postgraduate study at the University of Birmingham. To see what funding and scholarships are available, please visit: http://www.birmingham.ac.uk/pgfunding

Open Days

Explore postgraduate study at Birmingham at our on-campus open days.
Register to attend at: http://www.birmingham.ac.uk/pgopendays

Virtual Open Days

If you can’t make it to one of our on-campus open days, our virtual open days run regularly throughout the year. For more information, please visit: http://www.pg.bham.ac.uk

Read less
This Masters in Sensor and Imaging Systems (SIS) focuses on the technologies and techniques that underpin a vast range of societal, research and industrial needs. Read more
This Masters in Sensor and Imaging Systems (SIS) focuses on the technologies and techniques that underpin a vast range of societal, research and industrial needs. It is delivered and awarded jointly by the Universities of Glasgow and Edinburgh. Sensing and sensor systems are essential for advances in research across all fields of physics, engineering and chemistry and are enhanced when multiple sensing functions are combined into arrays to enable imaging. Industrial applications of sensor systems are ubiquitous: from mass-produced sensors found in modern smart phones and every modern car to the state-of-the-art, specialist high-value sensors routinely used in oil and gas recovery, scientific equipment, machine tools, medical equipment and environmental monitoring. This is an industry-focused programme, designed for people looking to develop skills that will open up opportunities in a host of end applications.

Why this programme

-This is a jointly taught and awarded degree from the University of Glasgow and the University of Edinburgh, developed in with conjunction with CENSIS.
-CENSIS is a centre of excellence for Sensor and Imaging Systems (SIS) technologies, CENSIS enables industry innovators and university researchers to collaborate at the forefront of market-focused SIS innovation, developing products and services for global markets.
-CENSIS, the Innovation Centre for Sensor and Imaging Systems, is one of eight Innovation Centres that are transforming the way universities and business work together to enhance innovation and entrepreneurship across Scotland’s key economic sectors, create jobs and grow the economy. CENSIS is funded by the Scottish Funding Council (£10m) and supported by Scottish Enterprise, Highlands and Islands Enterprise and the Scottish Government.
-CENSIS has now launched its collaborative MSc in Sensor and Imaging Systems, designed to train the next generation of sensor system experts.
-This programme will allow you to benefit from the commercial focus of CENSIS along with the combined resources and complementary expertise of staff from two top ranking Russell Group universities, working together to offer you a curriculum relevant to the needs of industry.
-The Colleges of Science and Engineering at the University of Glasgow and the University of Edinburgh delivered power and impact in the 2014 Research Excellent Framework. Overall, 94% of Edinburgh’s and 90% of Glasgow’s research activity is world leading or internationally excellent, rising in Glasgow’s case to 95% for its impact.

Programme structure

The programme comprises a mix of core and optional courses. The curriculum you undertake is flexible and tailored to your prior experience and expertise, your particular research interests, and the specific nature of the extended research project topic provisionally identified at the beginning of the MSc programme.

Graduates receive a joint degree from the universities of Edinburgh and Glasgow.

Programme timetable
-Semester 1: University of Glasgow
-Semester 2: University of Edinburgh
-Semester 3: MSc project, including the possibility of an industry placement

Core courses
-Circuits and systems
-Detection and analysis of ionising radiation
-Fundamentals of sensing and imaging
-Imaging and detectors
-Technology and innovation management
-Research project preparation

Optional courses
-Biomedical imaging techniques
-Biophysical chemistry
-Biosensors and instrumentation
-Chemical biology
-Digital signal processing
-Electronic product design and manufacture
-Electronic system design
-Entrepreneurship
-Lab-on-chip technologies
-Lasers and electro-optic systems
-Microelectronics in consumer products
-Microfabrication techniques
-Nanofabrication
-Physical techniques in action
-Waves and diffraction

Industry links and employability

-This is an industry-focused programme, developed in conjunction with CENSIS, an Innovation Centre established to maximise the growth potential of Scottish companies operating in the sensor systems market. It will appeal to graduates seeking to develop sensor and imaging systems (SIS) skills that can be used in a range of end markets and applications.
-SIS is key enabling technology to achieve quality, efficiency and performance across all key markets – from transport, security and oil and gas, through to agriculture, the built environment and life sciences. The underlying requirement across of these sectors is the same: to sense, measure, process, communicate and visualise in a way that provides valuable and actionable information based on data.
-Sensing is essential for advances in research across all fields of physics, engineering and chemistry, and is enhanced when multiple sensing functions are combined into arrays to enable imaging. Industrial applications of SIS are ubiquitous: from mass-produced sensors found in smart phones and cars, to the state-of-the-art, specialist high-value sensors routinely used in oil and gas recovery, scientific equipment, machine tools, medical equipment and environmental monitoring.
-Increasingly, sensor systems – along with their underpinning device, signal processing, networking, information dissemination and diagnostics technologies - are being tightly integrated within the products and services of a wide range of Scottish businesses. There are endless opportunities within this emerging global market (worth £500Bn) to develop fundamental changes to benefit society and commercialise sensor lead products over wide market areas.
-Markets that need graduates with SIS skills include include defence and security, renewables, aerospace, subsea, intelligent transport, environmental science, built environment, energy and the smart grid, healthcare and drug discovery, medical diagnostics, and food and drink.

Career prospects

You will gain an understanding of sensor-based systems applicable to a whole host of markets supported by CENSIS.

Career opportunities are extensive. Sensor systems are spearheading the next wave of connectivity and intelligence for internet connected devices, underpinning all of the new ‘smart markets’, e.g., grid, cities, transport and mobility, digital healthcare and big data.

You will graduate with domain-appropriate skills suitable for a range of careers in areas including renewable energy, subsea and marine technologies, defence, automotive engineering, intelligent transport, healthcare, aerospace, manufacturing and process control, consumer electronics, and environmental monitoring.

Globally, the market for sensor systems is valued at £500Bn with an annual growth rate of 10%. The Scottish sensor systems market is worth £2.6Bn pa. There are over 170 sensor systems companies based in Scotland (SMEs and large companies), employing 16,000 people in high-value jobs including product R&D, design, engineering, manufacturing and field services.

Read less
The Department of Computer Science at Binghamton University aims to provide all graduates with a strong foundation in computer science while also offering the opportunity to pursue specific interests within computer science and/or interests in other disciplines. Read more
The Department of Computer Science at Binghamton University aims to provide all graduates with a strong foundation in computer science while also offering the opportunity to pursue specific interests within computer science and/or interests in other disciplines. The program provides students with an understanding of the theory and practice of automating the representation, storage and processing of information, while emphasizing experimental research to design and engineer a wide variety of computer and information systems.

The Master of Science in Computer Science (MSCS) is intended for students with a strong background in computer science and a desire to prepare for research studies or professional practice. If you have bachelor's degree in computer science or a related field, you're invited to apply for admission to our MSCS program.

The doctoral program leads to a PhD in Computer Science. Students admitted into the program typically have a master's degree in computer science or a closely related discipline. Students with a bachelor's degree and a strong academic record may also be directly admitted.

Recent doctoral graduates have gone on to careers in as software engineering at Intel, eBay, Cisco Systems, positions at Hewlett Packard, Microsoft, Twitter, Bloomberg, the Air Force Research Lab, and the U.S. Census. Academic placements include assistant professorships at California State University at Fullerton, Valdosta State University, and Harran University, Turkey.

The Master's program leads to a Master of Science in Computer Science. It is intended for students with a strong background in computer science and a desire to prepare for research studies or professional practice. Holders of the baccalaureate degree in computer science or a related field are invited to apply for admission to the MSCS program. Students whose undergraduate degree is not in computer science may be required to complete some preparatory work in addition to fulfilling the requirements listed below.
Program requirements include four core courses taken over the first two semesters of study. These courses are Computer Organization and Architecture, Operating Systems, Programming Languages and Design & Analysis of Computer Algorithms. Three graduating options are offered: a thesis option, a project option and a comprehensive exam. Beyond the 4 core courses, these options require students to complete 4, 5 and 6 elective courses, respectively, chosen from a broad set of courses offered by the Department.

Applicant Qualifications

- Undergraduate major in computer science or related field desirable for admission
- Applicants are additionally expected to have completed coursework in the following areas:
*Algorithms and data structures
*Computer organization and architecture
*Operating systems
*Programming languages
*Discrete mathematics

All applicants must submit the following:

- Online graduate degree application and application fee
- Transcripts from each college/university you have attended
- Two letters of recommendation (three letters of recommendation for PhD applicants)
- Personal statement (2-3 pages) describing your reasons for pursuing graduate study, your career aspirations, your special interests within your field, and any unusual features of your background that might need explanation or be of interest to your program's admissions committee.
- Resume or Curriculum Vitae (max. 2 pages)
- Official GRE scores

And, for international applicants:
- International Student Financial Statement form
- Official bank statement/proof of support
- Official TOEFL, IELTS, or PTE Academic scores

Read less
The Computer Science program will introduce you to core areas of advanced computing architecture, advanced operating systems and theories and algorithms used in computing. Read more
The Computer Science program will introduce you to core areas of advanced computing architecture, advanced operating systems and theories and algorithms used in computing. You will conduct advanced research in software engineering, systems or artificial intelligence as you learn high-demand skills sought by industry.

Program Highlights

State-of-the-art computing facilities including the Integrated Engineering Science and Laboratory Facility (ISELF) Visualization Lab, Sunfire 280R running Solaris, several workstations running Windows and Linux and supercomputing facilities in the Twin Cities.
Five to seven graduate assistantship positions each year.
Research and project labs are equipped with Sun, Silicon Graphics and DEC Alpha workstations.
Program is offered on a part-time or full-time track.

Program Distinctions

Graduates have gone on to work for Amazon, Google, Guidant, Medtronics, IBM, Beckman Coulter and Thomson Reuters among others. They have also continued on to Ph.D. programs where they have been awarded assistantships.
Taught by 13 internationally-recognized faculty members.

Requirements and Details

The GRE is required.

A strong showing (more than 75th percentile) in the quantitative GRE score is essential.
A strong score in the verbal section is also important.
Admission is competitive.

Positive letters of recommendation are important, as is a solid undergraduate academic record.

Lack of a computer science background is usually not a major concern, since prerequisite courses are prescribed. However, a background in the sciences and mathematics is essential.

Admission decisions are made at specific times associated with the application deadlines, usually in the week following the deadlines.

A final admission decision may take up to three weeks to receive from the application deadline and up to ten weeks for I-20s to be issued to international students.

Fully-qualified applicants will have taken courses that cover the following topics:

Non-linear data structures: sorting and searching algorithms.
Computer architecture: hardware organization, I/O interface, interrupt mechanisms and pipeline processor design.
File systems; hashed indexed, ISAM files; B-trees; external sorting.
Programming languages: design and implementation.
Operating systems: process, memory and file system management, device handlers.
Finite mathematics and modern algebra.

Read less
The course aims to provide students with the skills to design, implement and manage computer-based systems security, using software and networking technologies. Read more

Description

The course aims to provide students with the skills to design, implement and manage computer-based systems security, using software and networking technologies. This title also includes the basic, key elements of forensic computing: forensics and the legal and ethical issues involved in any digital investigation. Students will gain a broad understanding of the different levels of computer and network security together with the basic phases of a forensic investigation and of computing in general. They will examine wireless communication systems; networks; operating systems and interfacing socket programming; servers and their security implications; and the planning and implementation of network security management, including security, risk analysis and disaster recovery planning.

Units

- Advanced Computer Networks and Operating Systems
- Introduction to Computer Forensics and Security
- Advanced Network Security
- Cryptography and Encryption
- Masters Project

All course units combine with a flexible approach, which allows students to undertake practical project work while attending work placements. With one-third of the course project based, it may be possible to undertake yours in collaboration with an external organisation or within the School. The part-time route is especially suitable if you have industrial experience and wish to update your knowledge. Especially useful in the case of missed classes, the online virtual learning environment, Moodle, provides extensive access to lectures, course materials and assessment information. Assessment will be through coursework, examination and dissertation.

Career prospects

This course will equip you for a range of IT positions in the private and public sectors and is also a good foundation for further study. Our MSc graduates have entered a wide range of industries or gone onto PhDs, including in the School of Computing, Mathematics and Digital Technology.

Careers support is available from the moment you join us, throughout your time here, and for up to three years after the completion of your course. We have a range of services available through the School of Computing, Mathematics and Digital Technology and the University Careers Service including dedicated careers and employability advisors.

Professional Accreditation

The School is an educational affiliate of the British Computing Society – the Chartered Institute for IT in the UK (BCS), a member of the Oracle Academy and an Academy for the Computer Technology Industry Association (CompTIA). Many of the School’s degree programmes are accredited by BCS.

The School is also an academic partner of the Institute of Information Security Professionals who recognise our expertise in the field of information and cyber security. Mathematics degree courses are approved by the Institute of Mathematics and its Applications.

Read less
Learn how to identify new and existing cyber threats and determine methods and processes to minimise attacks. Gain skills in a real-life business context, by cracking passwords and wireless networks and testing web applications for vulnerabilities and security breaches. Read more
Learn how to identify new and existing cyber threats and determine methods and processes to minimise attacks. Gain skills in a real-life business context, by cracking passwords and wireless networks and testing web applications for vulnerabilities and security breaches.

Cyber security is a priority for governments and organisations throughout the world. We’ll work together to explore how organisations and individuals can take action to protect themselves online from cyber-attacks.

We’ll begin by understanding networks and operating systems, how they work and the strengths and weaknesses of them. You’ll then think like a hacker, working from the inside out, as you recognise the threats to an organisation and its resources, and learn to implement and test secure systems.

Focusing on the strategic deployment and implementation of cyber security within an organisation, you’ll cover all aspects of cyber security including network security, computer security and information security.

You’ll apply your knowledge and skills hands-on in a real-life context, in our specialised lab, which is already equipped with tools such as Kali LInux, Wireshark, Nmap and Burp Suite. You’ll write your own Metasploit modules, automate social-engineering attacks, bypass antivirus software and turn access to one machine as you take total control of the enterprise.

You’ll gain skills in communicating information to higher levels of the corporation’s managers, giving you confidence to present your invaluable problem solving solutions and strategic security planning in any organisation.

We know there’s a worldwide shortage of skills graduates in cyber security, so you’ll be ahead of the game as you further your career and make a real impact on a society that is increasingly dependent on the internet and IT technology.

See the website http://www.anglia.ac.uk/study/postgraduate/cyber-security

Careers

The 2015 Global Information Security Workforce Study predicts that the global cyber security workforce shortage will reach 1.5 million by 2020, as demand outstrips supply. This means that there hasn't been a better time to join the cyber security sector.

Computer security is a fast developing area and your skills in computer, network and information security could see you working closely with lawyers, government, commercial organisations, the education sector and investigation agencies, as well as the finance and e-commerce sectors and national security organisations.

You’re also in the perfect position to continue your academic career and move up to our research degree Computer Science PhD.

Modules & assessment

Computer Networks
Operating Systems and Virtualisation
Secure Systems
Research Methods
Advanced Network Security Principles
Penetration Testing
Major Project

Assessment

We’ll asses your knowledge and understanding through a case study in which you’ll design, implement and test the security strategy of an organisation. You’ll also complete in-class tests, written assignments, software projects and presentations as part of the course.

Your faculty

The Faculty of Science & Technology is one of the largest of five faculties at Anglia Ruskin University. Whether you choose to study with us full- or part-time, on campus or at a distance, there’s an option whatever your level – from a foundation degree, to a BSc, MSc, PhD or professional doctorate.

Whichever course you pick, you’ll gain the theory and practical skills needed to progress with confidence. Join us and you could find yourself learning in the very latest laboratories or on field trips or work placements with well-known and respected companies. You may even have the opportunity to study abroad.

Everything we do in the faculty has a singular purpose: to provide a world-class environment to create, share and advance knowledge in science and technology fields. This is key to all of our futures.

Read less
Computer Science Departmental degree requirements for the master’s degree, which are in addition to those established by the College of Engineering and the Graduate School (http://graduate.ua.edu/), are as follows for Plan I and Plan II students. Read more
Computer Science Departmental degree requirements for the master’s degree, which are in addition to those established by the College of Engineering and the Graduate School (http://graduate.ua.edu/), are as follows for Plan I and Plan II students.

- Master of Science–Thesis Option (http://cs.ua.edu/graduate/ms-program/#thesis)
- Master of Science–Non-Thesis Option (http://cs.ua.edu/graduate/ms-program/#nonthesis)
- Timetable for the Submission of Graduate School Forms for an MS Degree (http://cs.ua.edu/graduate/ms-program/#timetable)

Visit the website http://cs.ua.edu/graduate/ms-program/

MASTER OF SCIENCE–THESIS OPTION (PLAN I):

30 CREDIT HOURS
Each candidate must earn a minimum of 24 semester hours of credit for coursework, plus a 6-hour thesis under the direction of a faculty member. Unlike the general College of Engineering requirements, graduate credit may not be obtained for courses at the 400-level.

Degree Requirements Effective Fall 2011

Credit Hours
The student must successfully complete 30 total credit hours, as follows:

- 24 hours of CS graduate-level course work

- 6 hours of CS 599 Master’s Thesis Research: Thesis Research.

- Completion of at least one 500-level or 600-level course in each of the four core areas (applications, software, systems and theory). These courses must be taken within the department and selected from the following:
Applications: CS 528, CS 535, CS 557, CS 560, CS 609, CS 615
Software: CS 503, CS 507, CS 515, CS 516, CS 534, CS 600, CS 603, CS 607, CS 614, CS 630
Systems: CS 526, CS 538, CS 567, CS 606, CS 613, CS 618
Theory: CS 500, CS 570, CS 575, CS 601, CS 602, CS 612

- No more than 12 hours from CS 511, CS 512, CS 591, CS 592, CS 691, CS 692 and non-CS courses may be counted towards the coursework requirements for the master’s degree. Courses taken outside of CS are subject to the approval of the student’s advisor.

- Additional Requirements -

- The student will select a thesis advisor and a thesis committee. The committee must contain at least four members, including the thesis advisor. At least two members are faculty of the Computer Science department, and at least one member must be from outside the Department of Computer Science.

- The student will develop a written research proposal. This should contain an introduction to the research area, a review of relevant literature in the area, a description of problems to be investigated, an identification of basic goals and objectives of the research, a methodology and timetable for approaching the research, and an extensive bibliography.

- The student will deliver an oral presentation of the research proposal, which is followed by a question-and-answer session that is open to all faculty members and which covers topics related directly or indirectly to the research area. The student’s committee will determine whether the proposal is acceptable based upon both the written and oral presentations.

- The student will develop a written thesis that demonstrates that the student has performed original research that makes a definite contribution to current knowledge. Its format and content must be acceptable to both the student’s committee and the Graduate School.

- The student will defend the written thesis. The defense includes an oral presentation of the thesis research, followed by a question-and-answer session. The student’s committee will determine whether the defense is acceptable.

- The student will complete an oral comprehensive exam. This exam is scheduled with the Department Head prior to the semester in which the student intends to graduate.

- Other requirements may be specified by the Graduate School (http://graduate.ua.edu/) and by the College of Engineering.

Degree Requirements Prior to Fall 2011

Credit hours

The student must successfully complete 30 total credit hours, as follows:

- 6 hours of CS 599 Master’s Thesis Research

- 24 hours of CS graduate-level course work with a grade of A or B, including the following courses completed at The University of Alabama:
At least 3 hours of theory courses (CS 500 Discrete math, CS 601 Algorithms, CS 602 Formal languages, CS 612 Data structures)

At least 3 hours of software courses (CS 600 Software engineering, CS 603 Programming languages, CS 607 Human-computer interaction, CS 614 Compilers, CS630 Empirical Software Engineering)

At least 3 hours of systems courses (CS 567 Computer architecture, CS 606 Operating systems, CS 613 Networks, CS 618 Wireless networks)

At least 3 hours of applications courses (CS 535 Graphics, CS 560 or 591 Robotics, CS 591 Security, CS 609 Databases)

- Additional Requirements -

- The student will select a thesis advisor and a thesis committee. The committee must contain at least four members, including the thesis advisor. At least two members are faculty of the Computer Science department, and at least one member must be from outside the Department of Computer Science.

- The student will develop a written research proposal. This should contain an introduction to the research area, a review of relevant literature in the area, a description of problems to be investigated, an identification of basic goals and objectives of the research, a methodology and timetable for approaching the research, and an extensive bibliography.

- The student will deliver an oral presentation of the research proposal, which is followed by a question-and-answer session that is open to all faculty members and which covers topics related directly or indirectly to the research area. The student’s committee will determine whether the proposal is acceptable based upon both the written and oral presentations.

- The student will develop a written thesis that demonstrates that the student has performed original research that makes a definite contribution to current knowledge. Its format and content must be acceptable to both the student’s committee and the Graduate School.

- The student will defend the written thesis. The defense includes an oral presentation of the thesis research, followed by a question-and-answer session. The student’s committee will determine whether the defense is acceptable.

- The student will complete an oral comprehensive exam. This exam is scheduled with the Department Head prior to the semester in which the student intends to graduate.

- Other requirements may be specified by the Graduate School (http://graduate.ua.edu/) and by the College of Engineering.

MASTER OF SCIENCE–NON-THESIS OPTION (PLAN II):

30 CREDIT HOURS
Each candidate must earn a minimum of 30 semester hours of credit for coursework, which may include a 3-hour non-thesis project under the direction of a faculty member. Unlike the general College of Engineering requirements, graduate credit may not be obtained for courses at the 400-level.

Degree Requirements Effective Fall 2011

The student must successfully complete 30 total credit hours, as follows:

- Completion of at least one 500-level or 600-level course in each of the four core areas (applications, software, systems and theory).
Applications: CS 528, CS 535, CS 557, CS 560, CS 609, CS 615
Software: CS 503, CS 507, CS 515, CS 516, CS 534, CS 600, CS 603, CS 607, CS 614, CS 630
Systems: CS 526, CS 538, CS 567, CS 606, CS 613, CS 618
Theory: CS 500, CS 570, CS 575, CS 601, CS 602, CS 612

- No more than 12 hours from CS 511, CS 512, CS 591, CS 592, CS 691, CS 692 and non-CS courses may be counted towards the coursework requirements for the master’s degree. Courses taken outside of CS are subject to the approval of the student’s advisor.

- The student may elect to replace 3 hours of course work with 3 hours of CS 598 Research Not Related to Thesis: Non-thesis Project. This course should be proposed in writing in advance, approved by the instructor, and a copy placed in the student’s file. The proposal should specify both the course content and the specific deliverables that will be evaluated to determine the course grade.

- Additional Requirements -

- The student will complete an oral comprehensive exam. This exam is scheduled with the Department Head prior to the semester in which the student intends to graduate.

- Other requirements may be specified by the Graduate School and by the College of Engineering.

Degree Requirements Prior to Fall 2011

Credit hours

The student must successfully complete 30 total credit hours of CS graduate-level course work with a grade of A or B, as follows:

- The following courses will be completed at The University of Alabama:
At least 3 hours of theory courses (CS 500 Discrete math, CS 601 Algorithms, CS 602 Formal languages, CS 612 Data structures)

At least 3 hours of software courses (CS 600 Software engineering, CS 603 Programming languages, CS 607 Human-computer interaction, CS 614 Compilers, CS630 Empirical Software Engineering)

At least 3 hours of systems courses (CS 567 Computer architecture, CS 606 Operating systems, CS 613 Networks, CS 618 Wireless networks)

At least 3 hours of applications courses (CS 535 Graphics, CS 560 or 591 Robotics, CS 591 Security, CS 609 Databases)

- The student may elect to replace 3 hours of course work with 3 hours of CS 598 Research Not Related to Thesis: Non-thesis Project. This course should be proposed in writing in advance, approved by the instructor, and a copy placed in the student’s file. The proposal should specify both the course content and the specific deliverables that will be evaluated to determine the course grade.

- Additional Requirements -

- The student will complete an oral comprehensive exam. This exam is scheduled with the Department Head prior to the semester in which the student intends to graduate.

- Other requirements may be specified by the Graduate School and by the College of Engineering.

TIMETABLE FOR THE SUBMISSION OF GRADUATE SCHOOL FORMS FOR AN MS DEGREE
This document identifies a timetable for the submission of all Graduate School paperwork associated with the completion of an M.S. degree

- For students in Plan I students only (thesis option) after a successful thesis proposal defense, you should submit the Appointment/Change of a Masters Thesis Committee form

- The semester before, or no later than the first week in the semester in which you plan to graduate, you should “Apply for Graduation” online in myBama.

- In the semester in which you apply for graduation, the Graduate Program Director will contact you about the Comprehensive Exam.

Find out how to apply here - http://graduate.ua.edu/prospects/application/

Read less
Humber’s Information Technology Solutions graduate certificate program is carefully designed to support students without an information technology (IT) background. Read more
Humber’s Information Technology Solutions graduate certificate program is carefully designed to support students without an information technology (IT) background. Our program offers an introductory first semester with an introduction to software development, database concepts and web development preparing students to engage in advanced study following their own selection of options in areas including database development, database administration, enterprise software development (.NET/Java), web development, and mobile application development (Android and/or iOS) in subsequent semesters of study.

This program provides the concepts, skills and knowledge required to work as a mobile (Android or iOS) application developer, Java/.NET application developer, DBAs for Oracle/SQL Server, as well as back-end or front-end web developers.

Working on team projects and individually, you will create commercial applications that apply theories to the creation, administration and development of databases as well as database-driven mobile, web and desktop applications. Project management and presentation skills are a key component of the program.

Professional Accreditations

Upon completion of the certificate, graduates may have the skills necessary to quality them to write industry certification examinations in their area of specialization.

Course detail

Upon successful completion of the program, a graduate will:

• Install, configure, program and maintain IT applications (including operating systems, database management systems).
• Create customized software.
• Debug, document and repair bugs in applications.
• Identify, analyze and document the client’s business and system requirements.
• Interpret, create, and present work-related documents and information effectively and accurately.
• Create and manage normalized and relational data tables including constraints.
• Write programs that communicate with other computers over a network.
• Develop and implement dynamic web applications using appropriate programming language, databases and data sources.
• Identify, analyze and apply object oriented (O-O) model and concepts including objects, classes, encapsulation, inheritance, abstraction, polymorphism, behaviour, and interfaces.
• Plan and execute successful IT and project development activities utilizing project management skills and software.
• Design, develop and implement authentication and secure applications.
• Identify ethical issues in Information Technology projects and propose strategies to address these issues.
• Implement personal and professional development strategies to improve job performance and promote professional growth.
• Identify the underlying architectural system structures and components for a given enterprise software application.
• Describe current trends and challenges in Information Technology projects.

Modules

Semester 1
• ITC 5101: Operating Systems
• ITC 5102: Java Programing 1
• ITC 5103: Web Programming and Design
• ITC 5104: Introduction to Database and SQL
• ITC 5105: Requirement Analysis and Process Modelling

Semester 2
• ITC 5201: Database Programming using Java
• ITC 5202: XML and Java Script

Semester 3
• ITC 5301: Career Connections
• ITC 5302: Project Management

Semester 4
• ITC 5401: Employee Engagement
• ITC 5402: Capstone Project

Work Placement

This program does not have a work placement component. However, in conjunction with the Career Connections course, we provide graduates with job search assistance at the end of the program. Students are encouraged to market themselves to prospective employers.

Your Career

Graduates will qualify for full-time and freelance employment as enterprise software developers; junior and intermediate software developers; enterprise programmers for e-commerce; web programmers; intranet, extranet and database developers; or database administrators in corporate, small- and medium-sized businesses, government, entertainment, education, healthcare and the not-for-profit sectors.

How to apply

Click here to apply: http://humber.ca/admissions/how-apply.html

Funding

For information on funding, please use the following link: http://humber.ca/admissions/financial-aid.html

Read less
Humber’s Wireless Telecommunications graduate certificate program prepares you with electronics, computer engineering, physics and telecommunications skills for work on the cutting-edge technologies in the wireless telecommunications industry. Read more
Humber’s Wireless Telecommunications graduate certificate program prepares you with electronics, computer engineering, physics and telecommunications skills for work on the cutting-edge technologies in the wireless telecommunications industry.

Students will become familiar with the infrastructure of communications systems and how to be successful in the communications industry. This wireless program focuses on three main outcomes: RF/optical test and measurement, networking, and troubleshooting a number of wireless telecommunications systems.You will learn to use engineering tools and equipment for testing of systems including LTE/UMTS/GSM drive test tools, spectrum analyzers, network analyzers, optical time domain reflectometers. You will also learn how to troubleshoot and configure local- and wide-area networks (LAN/WANs) at the device and at the protocol levels. Our courses cover additional networking topics relevant to telecom carriers such as MPLS, VPNs, QoS and VoIP. You will be prepared to understand the technology roadmap leading into Internet of Things (IoT), 5G and data center virtualization technologies.

This program is an established program with industry with over two decades of expertise. Students will have access to learn on some of the best equipment available. Curriculum is kept current with the collaboration of our industry partners in the wireless field. Students utilize the latest technologies in small classes taught by experienced faculty and industry leaders.

Course detail

Upon successful completion of the program, a graduate will:

• Analyze, test, measure and troubleshoot RF (radio frequency) signals, attenuation and antenna systems, and test and troubleshoot linear and non-linear circuit modules.
• Manage network performance issues and problems against user needs through the design, implementation, testing, and troubleshooting of a variety of current and relevant protocols.
• Build wired and/or wireless networks using design documentation, and measure the performance of both the wired and wireless networks’ components and the networks’ applications using basic and advanced network management tools and applications.
• Design, install and configure networks - implementing various network configurations using different standard protocols, and upgrade network hardware (e.g. workstations, servers, wireless access points, routers, switches, firewalls etc.) and related components and software according to the best practices in the industry.
• Monitor and evaluate network security issues and perform basic security audits on both wired and wireless networks.
• Utilize change control, issue documentation and problem escalation procedures and processes, generate and maintain “as-built” network documentation following industry best practices.
• Apply RF analog and digital circuit analysis and design concepts to analyze voice and data communication using different modulation techniques.
• Use simulation tools to mathematically model and solve RF (radio frequency) electrical and electronics networks which are essential components of telecommunications and wireless technologies.
• Install, or use existing, operating systems & its components and manage users, processes, memory management, peripheral devices, telecommunication, networking and security, and troubleshoot hardware and software components of computer and operating systems using system level commands and scripts.
• Assist in the design and development of a wide area of networks using a variety of network layer-one, layer-two and layer-three protocols, microwave communication links, and fiber optics links.
• Describe the infrastructures, components, and protocols of a wide range of wireless technologies.
• Develop the infrastructure required for VoIP transport through IP networks, and be able to configure VoIP clients such as IP telephones and soft phones.

Modules

Semester 1
• WLS 5000: Applied Electromagnetics
• WLS 5002: RF Technology
• WLS 5003: Telecommunication Systems
• WLS 5004: Data Networks
• WLS 5500: Microwave and Fibre Optics

Semester 2
• WLS 5501: Broadband Communications and Security
• WLS 5503: Mobile Technologies
• WLS 5505: Wireless Data Networks
• WLS 5506: LTE Core
• WLS 5507: Wireless Project and ITIL

Your Career

The Canadian wireless industry supports over 280,000 jobs with sector salary average more than Canada’s average salary. In addition, the international wireless telecommunications market is growing. There are numerous employment opportunities in the planning, developing, manufacturing, co-ordinating, implementing, maintaining and managing of telecommunications systems for businesses and government.

As the rate of technology adoption increases in Canadian industry, the Wireless Telecommunications program is preparing graduates for these new markets. A 2015-2019 labour market report by the Information and Communications Technology Council (ICTC) indicates that by 2019, over 182,000 critical ICT positions will be left unfilled.

Graduates of the program work at cell phone service providers, equipment manufacturers, in house information technology (IT) departments, sales departments, and specialized telecommunication and networking companies.

How to apply

Click here to apply: http://humber.ca/admissions/how-apply.html

Funding

For information on funding, please use the following link: http://humber.ca/admissions/financial-aid.html

Read less
Are you excited by the impact of technology on our everyday lives and are keen to forge a successful career in the field? From day one, you will be immersed in an exciting, innovative environment where you will develop broad knowledge and skills in the main areas of computing and information technology which will be directly relatable to your future career. Read more
Are you excited by the impact of technology on our everyday lives and are keen to forge a successful career in the field? From day one, you will be immersed in an exciting, innovative environment where you will develop broad knowledge and skills in the main areas of computing and information technology which will be directly relatable to your future career.

You will take core modules covering areas of computing in programming, databases, systems analysis and design, and computer networks and web development. Designed in consultation with partners from industry, you will develop the most up-to-date computing knowledge, desired by employers across the industry.

This course fully meets the educational requirements for BCS Chartered IT Professional registration.

This course has several available starts and study options - for more information, please view the relevant web-page:
16 months full time - https://www.northumbria.ac.uk/study-at-northumbria/courses/computing-and-information-technology-dtfcin6/

Part time study - https://www.northumbria.ac.uk/study-at-northumbria/courses/computing-and-information-technology-dtpcin6/

3 years distance learning - https://www.northumbria.ac.uk/study-at-northumbria/courses/computing-and-information-technology-dtdciy6/

Learn From The Best

You will be taught by a range of academic staff who bring a wealth of professional experience. They are experts in specialist areas such as Strategic Management, Computer Science and Web Based Information Retrieval.

In a dynamic learning environment with an expert team of staff, you will be taught theoretical and practical research skills such as information literacy, as well as problem solving skills, self-directed learning and communication skills.

Teaching And Assessment

On this course, you will have the opportunity to independently research topics to deepen your learning and understanding, while learning the skills to communicate your research and investigations.

Assessment methods will include reports, presentations, individual, group and project work, alongside regular feedback on your summative assessment.

Module Overview
KC7013 - Database Modelling (Core, 20 Credits)
KF7010 - Programme Design & Implementation (Core, 20 Credits)
KF7011 - Systems Analysis & Design with UML (Core, 20 Credits)
KF7013 - Website Development and Deployment (Core, 20 Credits)
KF7023 - Computer Networks & Operating Systems (Core, 20 Credits)
KF7028 - Research Methods and Project Management (Core, 20 Credits)
KF7029 - MSc Computer Science & Digital Technologies Project (Core, 60 Credits)

Learning Environment

Throughout the duration of your course you will have access to our state-of-the-art facilities including our dedicated computing suite, Pandon Basement.

Pandon Basement houses specialist facilities and studios with industry-standard software.

You will also have access to dedicated computing areas, which can be used during free periods and into the evenings and weekends.

When you want to get hands-on with technology our range of specialist facilities will support you.

You will also have access to the University’s award winning library (online and on campus). The library achieved the second highest score in the UK in the Times Higher Student Satisfaction Survey 2015.

Research-Rich Learning

You will be immersed in a research-rich environment supported by our rapidly expanding Computer Science and Information Science Research Groups.

Northumbria’s BCS-accredited MSc has been designed to ensure you learn the most up-to-date computing knowledge required by employers across the industry. We offer research-informed teaching, industry-standard software and a strong community of like-minded students.”

You will be taught by staff with a strong academic background in areas such as Web Programming who promote innovative and excellent learning and teaching practice.

You will develop an understanding of important research methods and approaches which could be directly applicable to the demands of your future career.

Give Your Career An Edge

Industry practice has strongly influenced the design of the programme to give you the computing knowledge to work within a variety of roles in the sector.

Learning independently, working collaboratively on projects, evaluating and reflecting upon practitioner experience, are all essential skills of the computing profession. Your modules will enable you to do all of this and more as you develop the qualities needed for a career in computing.

This programme will prepare you to meet the educational requirements for BCS, the Chartered Institute for IT, Chartered IT Professional (CITP) registration.

Your Future

Upon graduating from this course, you will have an in-depth knowledge and critical understanding of the main areas of Computing and Information Technology, including the key areas of systems analysis, systems development, operating systems, networking, databases and the internet .

We place a real emphasis on developing the transferable skills that will open doors to a range of careers. These include communication, analytical and problem solving skills, technical skills and the ability to work independently and as part of a team.

Graduates are expected to work in a number of career opportunities across a wide range of computer areas including software engineering, systems analysis and design, computer networks, database development and management, software testing and project management.

Read less
Forensic information technology (FIT) is the scientific use or application of information technology (IT) in the generation and presentation of digital evidence to be used in courts, legal or other formal proceedings. Read more

Why take this course?

Forensic information technology (FIT) is the scientific use or application of information technology (IT) in the generation and presentation of digital evidence to be used in courts, legal or other formal proceedings.

This course will enable you to develop your understanding and application of security issues and cybercrime for the purpose of forensic computing and investigation.

What will I experience?

On this course you can:

Learn how to investigate hacking, fraud and deception using a range of digital forensic tools
Practise identifying intruders' trails and suspected inappropriate use of internet applications in order to compile scientific evidence to prosecute
Manage a real-life computer engineering project using appropriate techniques for writing and reasoning about security policies

What opportunities might it lead to?

Many police investigations or civil disputes involve investigation of computer systems, mobile phones or other information devices, and there are an increasing number of UK companies that undertake investigations as consultants. You can expect to find career opportunities in such companies as well as in law enforcement and other services.

Accredited by BCS, The Chartered Institute for IT for the purposes of fully meeting the further learning academic requirement for registration as a Chartered IT Professional (CITP). This course also partially meets the academic requirement for registration, either as a Chartered Scientist (CSci) or (on behalf of the Engineering Council) as a Chartered Engineer (CEng)*.

*On condition that the Master's Engineering Project is successfully completed.

Module Details

You will study four key topics which will collaboratively develop your knowledge and ability to carry out forensic IT investigations as well as an introduction on how to build protected specification software for data and other web applications. You will also get to build your own test system as part of your final project.

Here are the units you will study:

Computer Forensic Investigation and Cryptography: This unit covers the practical aspects of conducting a forensic investigation of digital evidence. In order for the students to develop a critical understanding of computer forensics, a holistic approach of the forensics investigation process is adopted, with a full investigation ‘life cycle’ from seizure of evidence through to giving evidence in court as an expert witness. We look at a range of tools, operating systems and devices.

Computer Security: The unit provides an introduction to computer security concepts and their practical application, in both closed and interconnected networks. Students are expected to both understand and be able to critically evaluate different approaches to securing complex computer systems.

Cybercrime Security and Risk Management: This unit provides opportunities for participants to develop skills and knowledge in the understanding of corporate cyber threats. Drawing upon a range of practical examples, students will examine how rapid technological development and expansion in access to the internet has impacted upon crime (e.g. how anonymity and unfounded trust encourage deception), mapping out the terrain of information technology, and identifying the emerging areas of cyber crime. Areas explored will include the crossing of established boundaries into spaces over which control has already been established such as cyber-intrusion and cyber-theft, but also 'new cyber crimes' in the form of virtual trespass, Denial of Service attacks, and the development of opportunities for offending in the context of social networking websites.

Master's Project: You will undertake either an engineering unit or a study project, during the summer period. The project offers students the opportunity to apply the taught material in the solution of a real-world problem directly related to their course. The engineering project usually involves building a piece of software to solve a problem. An example of the sort of thing you might do would be building a tool to address a specific forensics requirement. The study project usually involves undertaking a study of an IT domain relevant to forensics. To prepare for this the project includes a number of preparatory sessions, which contribute to part of your final mark.

Specialist optional units include:

Systems, Security and Data Analysis: The first part of the unit provides an overview of computer organisation, operating systems and network design, with a strong focus on security considerations and aspects relevant to computer and digital forensics. The early part of the unit will provide an introduction to relevant issues in system architecture and file system organisation. Threats to computer systems will be considered. The first half of the unit is concluded with studying in some depth current technologies for securing real computer networks. The second part of the unit deals with the important topic of data analytics.

Advanced Programming Skills for the Web: This unit draws together a number of system development skills, focusing on how they can be applied to the development specifically of web applications. Topics covered include web programming, connecting databases to web applications, software tools, testing and security.

Programme Assessment

You will be taught through a combination of practical exercises, simulations, lectures, guest lectures and formative assessments, and will be expected to use a wide range of on and offline learning tools.

You will encounter a range of assessment styles depending on the content and nature of the unit topic. This can include written assignments, presentations as well as group and individual lab-based assessments. However, the most significant assessment element is the final dissertation, which reports and reflects on your final project.

Student Destinations

On completing this course, you will be equipped to seek employment in the following areas: IT auditing, information security, independent investigation, Computer Emergency Response Teams (CERT) and law enforcement agencies. Some of our previous graduates have been successful in finding employment within high-tech crime units, commercial investigation and national security bodies, while others go on to further research study at PhD level.

This course will also appeal to already practising professionals in related areas such as law enforcement, system administration, corporate security, IS auditing or security analysis and management for the commercial sector.

Read less
​This broad programme enables students to develop their skills in a range of computing areas. Read more

Course Overview

​This broad programme enables students to develop their skills in a range of computing areas. Graduates of this programme will have detailed knowledge of the state of the art in computing ranging from requirements engineering and programming through to developments in computer architecture and operating systems.​

See the website https://www.cardiffmet.ac.uk/management/courses/Pages/Computing---MSc.aspx

​Course Content​

The programme has nine taught modules:

Four foundational 10 credit modules:​​
- Technology Adoption
- Technology Project Management
- Legal Applications in Technology
- Team Software Development Project

Four specialist 20 credit modules:
- Requirements Engineering
- Object-Oriented Programming
- Architectures and Operating Systems
- Plus one option from the MSc Mobile Technologies programme​​

​In addition, one 20 credit module, 'Research Methods for Technology Dissertations' is undertaken in preparation for the self-managed element.

120 credits from these may result in the award of PgD; 60 credits from these may result in the award of PgC. The MSc requires all nine modules and completion of a 40 credit project.

Modules are delivered through lectures, tutorials, practical workshops and invited speakers.

Employability & Careers​

This programme is broad in scope, enabling a student to enhance their existing skills in anticipation of meeting the increasing commercial demand for advanced computing graduates.​​​

Find information on Scholarships here https://www.cardiffmet.ac.uk/scholarships

Find out how to apply here https://www.cardiffmet.ac.uk/howtoapply

Read less
This course is aimed at Computing graduates who wish to specialise further in Computer Science improving their knowledge, understanding, skills and capabilities. Read more

Description

This course is aimed at Computing graduates who wish to specialise further in Computer Science improving their knowledge, understanding, skills and capabilities. Our postgraduate courses are concerned with vocational education, and it is anticipated that the majority of MSc graduates will either enter employment (or continue) as IT/Computing professionals, or progress to doctoral work with a probable view to pursuing academic or research careers.

You will study four specialist, advanced units including High Performance Computing and Big Data and Advanced Computer Networks and Operating Systems. A wide-range of optional units allow you to tailor your course to specialise in areas of your choice. A third of your MSc will consist of a solo project with individual supervision. This is supported by a series of seminars/workshops, but the emphasis is on student-centred learning and recognises expectations about student autonomy, typical of postgraduate level and also is part of the strategy to enhance your employability through the development of confidence, self-awareness and self-sufficiency.

We are a member of the Oracle Academy and highly rated in terms of research. Our supervision and facilities are also excellent.

Core units

- High Performance Computing and Big Data
- Advanced Computer Networks and Operating Systems
- Masters Project

Option units

- Introduction to Data Science
- Enterprise Programming
- Cryptography and Encryption
- Mobile and Ubiquitous Computing
- Data Management and Machine Learning

Career prospects

This course will equip you for a range of IT positions in the private and public sectors and is also a good foundation for further study. Our MSc graduates have entered a wide range of industries or gone onto PhDs, including in the School of Computing, Mathematics and Digital Technology.

Careers support is available from the moment you join us, throughout your time here, and for up to three years after the completion of your course. We have a range of services available through the School of Computing, Mathematics and Digital Technology and the University Careers Service including dedicated careers and employability advisors.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X