Teesside is a major European centre for the chemical and petroleum processing sector and our MSc helps you gain knowledge and develop skills with industrial relevance. Petroleum reservoir engineering, well drilling, petroleum chemistry and economics of the oil and gas sector are just some of the topics covered.
There are three routes you can select from to gain a postgraduate Master’s award:
The one-year programme is a great option if you want to gain a traditional MSc qualification – you can find out more here. This two-year master’s degree with advanced practice enhances your qualification by adding to the one-year master’s programme an internship, research or study abroad experience.
The MSc Petroleum Engineering (with Advanced Practice) offers you the chance to enhance your qualification by completing an internship, research or study abroad experience in addition to the content of the one-year MSc.
The programme of lectures and project work encompasses a range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems.
Our one-year MSc Petroleum Engineering course is accredited by the Energy Institute under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC.
By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification. The earning potential of chartered petroleum engineers can exceed £100,000 a year.
The two-year MSc Petroleum Engineering with Advanced Practice incorporates all the elements of the one-year MSc and adds to these the advanced practice module. The new title is being prepared for formal recognition as accredited title.
Teesside University Society of Petroleum Engineering student chapter
Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase industrial networking opportunities for students.
For the MSc with advanced practice, you complete 120 credits of taught modules, a 60-credit master’s research project and 60 credits of advanced practice.
You select your master’s research project from titles suggested by either industry or our academic staff but you may also, with your supervisor’s agreement, suggest your own titles.
Here are some examples of the Major Project module developed by our MSc Petroleum Engineering students.
Advanced Practice options
Modules offered may vary.
This course provides specialist education tailored to the upstream and downstream petroleum industry. The relevance of this education, combined with our careful selection of candidates, has encouraged oil and gas companies to target our graduates for recruitment over the years.
The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists.
It is widely recognised that a steady influx of fresh people and ideas is vital for the longer-term success and stability of an organisation. As a result, it is expected that recruitment will continue, especially if you have the motivation and appropriate qualifications.
Study petroleum and subsurface geoscience in Ireland and benefit from a modern interdisciplinary training delivered by leading researchers and industry specialists at University College Dublin.
UCD School of Earth Sciences provides a one-year full-time Petroleum Geoscience MSc. The course offers bright and motivated geoscience graduates a vocational training in the range of technical fields associated with hydrocarbon exploration and production, as a prelude to a career in the petroleum industry or to further studies at PhD level.
The UCD training experience:
· Covers all aspects of exploration, appraisal and development geoscience from pore to basin scale.
· Involves substantial field-based instruction (23 days) in classic outcrop locations including the Clare Basin, Ireland; Bristol Channel, UK; Pyrenees, Spain.
· Provides first-hand experience of typical industry workflows, experience with key industry software and a dedicated workstation for each student during the course.
· Involves problem-based learning drawing on a wide range of geophysical, subsurface, outcrop and ‘behind-outcrop’ datasets.
· Includes a three-month applied research project and possible industry placement.
Students accepted on to the course can apply for the Woodside Energy Masters Scholarship in Petroleum Geoscience (€15,000) and MSc Scholarship Opportunities in Petroleum-Related Courses from the Department of Communications, Climate Action and Environment (up to €12,000). Please see here for further details.
Graduates from the course will be equipped with all the necessary technical and transferable skills for a career in the petroleum industry or further studies at PhD level. Past students have found employment with exploration and production companies (including Shell, Petronas and Providence). Ireland is an EU country, and has a 24-month stay-back option allowing non-EU MSc graduates to remain in Ireland, working or seeking employment, for two years following graduation.
Semester 1 covers modules in Petroleum Systems, Basin Analysis and Modelling, Seismic Techniques, Petrophysics, Depositional Systems and Structural Geology.
Semester 2 then focusses on Exploration Geology and Production Geoscience with team-based exercises mimicking industry asset-team projects. Geological field excursions are a key component of the course with three trips to see classic outcrops of the Clare Basin (western Ireland), Bristol Channel and Wessex Basins (southern England) and the Ebro Basin (Pyrenees, Spain).
During the final semester students undertake a three-month independent research project on an exploration or development related theme with opportunities for summer internships working on company data.
The course builds on significant in-house research expertise in frontier exploration, rift and hyper-extended basin evolution, reservoir sedimentology, geophysical imaging techniques, fault analysis and reservoir and fluid flow modelling. Teaching is delivered by highly experienced academic staff, many of who have previously worked within industry and are recognised international leaders in a variety of petroleum geoscience disciplines.
The UCD School of Earth Sciences has an internationally recognised reputation for excellence in teaching and research. It is the lead participant and host for the Irish Centre for Research in Applied Geosciences (iCRAG) which conducts research in hydrocarbons, geophysics, 3D modelling and marine geoscience, as well as in geochemistry, geophysics, groundwater and raw materials.
Founded in 1854, University College Dublin is Ireland’s Global University with 235,000 alumni across 165 countries. The university is ranked number 1 in Ireland for Earth & Marine Sciences (QS World University Subject Rankings 2017).
Application can be made via the UCD webpage here. There is a rolling deadline for this course until such time as all places have been filled; therefore early application is advised. Course entry will generally require a minimum 2.1 Honours degree or equivalent in Geology, Geoscience, Earth Science, Geophysics or a cognate discipline but relevant industrial experience will also be taken into account.
Click here to visit the MSc Petroleum Geoscience page on the University College Dublin website to find out more and apply!
The MSc in Petroleum Engineering is designed to equip students with the knowledge and skills to tackle the oil and gas industry’s most challenging problems. Upon graduating students will be able to understand, frame and solve the most complex of upstream problems in today’s petroleum industry.
These courses provide specialist education tailored to the requirements of the upstream petroleum industry. The relevance of this education, combined with careful selection of candidates, has encouraged oil and oilfield service companies to target Heriot-Watt for recruitment of graduates since 1976.
The Petroleum Engineering degree is delivered by the Institute of Petroleum Engineering, a world-leading Institute committed to delivering research and training programmes that meet the needs of the international petroleum industry. Students have been attending the Institute of Petroleum Engineering at Heriot-Watt University to study for the MSc programme in Petroleum Engineering since 1975.
The MSc in Petroleum Engineering is a programme of lectures and project work, encompassing a wide range of petroleum engineering fundamentals, relevant to the current petroleum engineering industry.
Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The courses on this programme are applied in nature and have been specifically designed so that our students are technically well prepared for, and have a sound knowledge of, the industry.
If your first language is not English, or your first degree was not taught in English, we’ll need to see evidence of your English language ability. The minimum requirement for English language is IELTS 6.5 or equivalent.
We offer a range of English language courses
Petroleum engineering is key to the functioning of the modern world, providing both energy and materials for industry. Teesside is a major European centre for the chemical and petroleum processing sector, making it an ideal location for individuals seeking to study for an MSc with industrial relevance.
The programme of lectures and project work, encompasses a wide range of petroleum fundamentals, pertinent to the modern petroleum industry. Project work provides an opportunity for ideas and methods, assimilated through lectures and tutorials, to be applied to real field evaluation and development design problems. The course is applied in nature and has been designed so that on completion, you are technically well prepared for a career in industry.
Our MSc Petroleum Engineering is accredited by the Energy Institute, under licence from the Engineering Council. This means that it meets the requirements for further learning for Chartered Engineer (CEng) under the provisions of UK-SPEC.
By completing this professionally accredited MSc you could benefit from an easier route to professional membership or chartered status, and it can help improve your job prospects and enhance your career. Some companies show preference for graduates who have a professionally accredited qualification, and the earning potential of chartered petroleum engineers can exceed £100,000 a year.
Teesside University Society of Petroleum Engineering student chapter
Our Society of Petroleum Engineering (SPE) student chapter is one of only nine in the UK. SPE is the largest individual member organisation serving managers, engineers, scientists and other professionals worldwide in the upstream segment of the oil and gas industry. Through our SPE chapter we can invite professional speakers from industry, and increase the industrial networking opportunities for students.
For the Postgraduate Diploma (PgDip) award you must successfully complete 120 credits of taught modules. For an MSc award you must successfully complete 120 credits of taught modules and a 60-credit master's research project.
You select your master’s research projects from titles suggested by either industry or our academic staff, but you may also, with your supervisor’s agreement, suggest your own titles.
Here are some examples of the Major Project module developed by our MSc Petroleum Engineering students.
Modules offered may vary.
How you learn
The course is delivered using a series of lectures, tutorials and laboratory sessions.
Our MSc Petroleum Engineering is supported by excellent laboratory and engineering machine workshop facilities including fluid flow measurement, computer modelling laboratories, other laboratories and workshops, an excellent library and computing facilities. We have invested around £150,000 in laboratory equipment particularly in within core analysis and enhanced oil recovery.
We have several computer laboratories equipped with specialised and general-purpose software. This generous computing provision gives you extended access to industry-standard software – it allows you to develop skills and techniques using important applications. For upstream processes, Teesside University has access to educational software packages like Petrel, Eclipse, CMG, PIPESIM and Ecrin to simulate the behaviour of oil reservoirs, calculating oil in situ, and oil and gas production optimisation. As for downstream processes, you can use HYSYS to test different scenarios to optimise plant designs.
Petroleum Experts Ltd has donated to Teesside University a network system and 10 educational licences for the IPM suite (Integrated Production Modelling software) which includes Prosper, Gap, Mbal, Pvtp, Reveal and Resolve. This £1.3m system and software is used by our students to design complete field models including the reservoir tanks, all the wells and the surface gathering system.
Petroleum laboratory facilities
Enhanced oil recovery and core analysis laboratory
The flow through porous media, enhanced oil recovery techniques and core analysis is done in the core flooding lab. The lab is equipped with core plugging and trimming, core preparation and conventional core properties measurement equipment. At a higher level, the lab is also equipped to perform some special core analysis measurements such as fluid relative permeabilities as well as rock surface wetting quantification.
The petrophysics lab allows you to study the properties of rocks, particularly the measurement of porosity and evaluation of permeability. The lab is equipped with sieve analysis equipment to investigate grain sorting and its effect on permeability and the porosity of rocks. You are able to gauge saturation and fluid flow through porous media.
Surface characterisation laboratory
The rock surface characterisation lab is equipped with a zeta analyser to measure the rock surface electric charge. You study the rock surface wetting state, adsorption and desorption potential using digitised contact angle apparatus and thermos-gravimetric apparatus respectively.
The drilling lab is equipped with mud measurement equipment including mud density, mud rheology and mud filtration systems to enable you to measure mud cake and formation damage. The lab highlights the importance of oilfield drilling fluids.
How you are assessed
Assessment varies from module to module. The assessment methodology could include in-course assignments, design exercises, technical reports, presentations or formal examinations. For your MSc project you prepare a dissertation.
These courses provide specialist education tailored to the requirements of both the upstream and downstream petroleum industry. The relevance of this education combined with careful selection of candidates has encouraged oil and gas companies to target our graduates for recruitment over the years.
The petroleum industry is subject to dramatic changes of fortune over time, with the oil price capable of very rapid rates of change in either direction. Petroleum, however, remains the dominant source of energy, with current world production of oil and gas at record rates. In this environment, companies face increasing technological and commercial challenges to keep their wells flowing and are increasingly dependent on input from petroleum engineers and geoscientists.
The hydrocarbon industry is crucial to provide us with domestic energy, transportation, plastics and other everyday needs. Petroleum Geoscience by Distance Learning with the University of London lets you earn a Masters degree in this booming sector which fits around your work or family commitments.
Choose from a range of course modules to tailor your learning, studying online over a period of years to earn your MSc. This flexible programme lets you choose between the standard course structure, a postgraduate diploma or a series of individual taught courses, letting you fit your studies around your daily life.
You’ll graduate with a Masters degree from the University of London by studying with the University of London International Programmes featuring academic direction from the renowned Royal Holloway Department of Earth Sciences, which is consistently ranked among the UK’s top 10. The programme finishes with a one-week field trip and research project, letting you contribute to our leading research culture while you develop your skills and knowledge.
Royal Holloway is recognised as one of the world’s premier training centres for the hydrocarbon industry, and has run a Petroleum Geoscience MSc programme since 1985. We’ve established invaluable links within the industry while helping over 600 graduates from 32 countries progress into rewarding careers in the Earth Sciences. Study Petroleum Geoscience (by Distance Learning) to enhance your career development without the need for full-time study.
Full details of the assessment process can be found on the University of London International Programmes website.
This course may be studied up to 5 years part-time.
Petroleum Geoscience (by Distance Learning) lets you earn a desirable Masters degree while studying part-time alongside employment. You’ll graduate with excellent employment prospects in a sector with many well-paid career opportunities in the UK and abroad, as well as the option to progress into further postgraduate study.
Royal Holloway, University of London has taught a Petroleum Geoscience programme since 1985, and it’s now recognised as one of the premier training facilities in the hydrocarbon industry. You’ll benefit from strong industry links, and a track record of helping 600 graduates from 32 countries progress to rewarding careers in the Earth Sciences.
PLEASE NOTE: All applications must be made through the University of London International Programmes website University of London application.
This is a practical production-focused course, ideally for Engineers who already have some oil and gas industry experience, and wish to enhance their employability by moving their career forward in this specialist direction.
The course has been developed and is supported by experienced industry professionals, using authentic industry applications software, technical standards and engineering practices. It combines academic study with current real-world industry practice to bring you an interesting, challenging learning experience which will prepare you to manage production issues both today, and in the future.
The core modules provide a solid understanding of the whole petroleum production process, from the reservoir to the process facility. After looking at the subsurface aspects of a system, you will learn how wells are drilled and completed, followed by the surface facilities where the hydrocarbons are processed.
The specialist modules that come later in the programme are very relevant to the every-day work of the Production Engineer, where you will have the opportunity to work with design, optimisation and modelling software, as well as analyse data and solve problems.
In Stage 1, you will study topics such as Subsurface, Wells, Facilities, and Business Essentials. On completion, you could exit this stage with a Pg Cert Oil and Gas Engineering.
In Stage 2 you will study; Production System Modelling, Production Operations, Well Completions and Subsea Systems, Petroleum Economics & Asset Management. On completion you could exit this stage with a Pg Dip Petroleum Production Engineering.
Stage 3 is the final stage, where you will focus on the Individual Project Report. Successful completion will award the MSc Petroleum Production Engineering.
You can study for this course full-time at our campus in Aberdeen or part-time online via the university's virtual learning environment CampusMoodle. Each module comprises up to 52 hours of lectures and tutorials.
Significant additional private study is expected during each module. You’ll work autonomously and take responsibility for your own learning and professional and academic development. The suggested hours-of-study-per-week and other information is detailed in each Module Descriptor.
STAFF DELIVERING ON THIS COURSE
As we’re located in the oil and gas capital of Europe, on-campus students can benefit from the knowledge and skills of industry specialists and a number of industrial visits.
Course links to the oil and gas industry have enabled us to develop a course which provides our graduates with excellent opportunities for employment and we attract students from all over the world. Our graduates hold positions as Petroleum Engineers and Managers in the upstream oil and gas industry, specialising in the productions discipline.
Please visit the website to find out how to apply.
The hydrocarbon industry is one of our most important sectors, helping to cater for needs as diverse as domestic energy, transportation and plastics manufacturing. Our flexible MSc in Petroleum Geoscience provides you with the ideal training for a career in the hydrocarbon industry and related sectors.
Our teaching on Petroleum Geoscience at Royal Holloway, University of London is informed by leading research and links to the international oil industry, meaning that you’ll benefit from the most relevant, up-to-date learning. The programme lets you select from a range of course modules to tailor your learning to your own preferences and ambitions.
You’ll study in the renowned Department of Earth Sciences, which is consistently ranked among the UK’s top 10 (The Complete University Guide and The Guardian 2016) – contributing towards our leading research culture with your own Independent Research Project. You’ll become a part of a vibrant international graduate community, and make use of our extensive range of modern facilities as you work towards a rewarding future career.
Our Petroleum Geoscience MSc has run since 1985, and has become recognised as one of the world’s premier training centres for the hydrocarbon industry. We’ve established excellent industry links, and have helped over 600 graduates from 32 countries progress into rewarding careers. Study Petroleum Geoscience at Royal Holloway and you’ll graduate with excellent employment prospects in a well-paid sector with job opportunities across the globe.
In addition to these mandatory course units there are a number of optional course units available during your degree studies. The following is a selection of optional course units that are likely to be available. Please note that although the College will keep changes to a minimum, new units may be offered or existing units may be withdrawn, for example, in response to a change in staff. Applicants will be informed if any significant changes need to be made.
The taught course units are assessed by a combination of written exams and coursework. Each of the six units comprises 10% of the total assessment for the MSc course. The remaining 40% of the assessment comes from the Independent Research Project.
Petroleum Geoscience at Royal Holloway, University of London was first established in 1985, giving us ample time to build valuable links with the international oil industry. We’re now recognised worldwide as one of the hydrocarbon industry’s premier training facilities, having helped more than 600 graduates from 32 countries progress into rewarding careers in the Earth Sciences.
This flexible Masters programme will equip you with a range of skills and knowledge necessary to achieve a fulfilling career in a sector with many well-paid career opportunities in the UK and abroad. There is huge demand for well qualified petroleum geoscientists, and as we’re considered world leaders in the field, you’ll graduate as a highly desirable candidate for employers in a variety of sectors.
Primarily suited to hydrocarbon industry professionals who wish to further develop their knowledge and skills while working, this online version of the well-established Royal Holloway MSc course has an international reputation for excellence in the petroleum industry.
Finding new reserves is becoming ever more challenging and the enhanced recovery of reserves from existing fields is becoming increasingly important. Well-trained Petroleum Geoscientists with the ability to integrate geological and geophysical data, and to apply it on a variety of scales, have a vital role to play.
This MSc in Petroleum Geoscience provides training in the practical and technical skills to address a range of exploration and production challenges, from predicting the likely distribution of hydrocarbons in a frontier sedimentary basin, to quantifying the complex structural, stratigraphic and sedimentological architecture of individual reservoirs.
Royal Holloway, University of London is one of the leading centres for Earth Science research in the UK. It has excellent links with the international oil industry and a strong programme of industry-funded petroleum geology research, which ensures that this Masters is up-to-date, focused and commercially relevant.
Royal Holloway staff provide tutorial support for each module, plus guidance for your dissertation and for project work, which is based on industry data.
- Comprehensive learning materials delivered via a dedicated web portal: video clips, animations, audiovisual presentations, fully illustrated manuals, self-assessment quizzes, exercises and computer-based practicals including examples of subsurface data such as seismic and well-log data
- A field trip and intensive study seminars held in the UK as part of the final module on the course
- Option to be awarded a Postgraduate Diploma in Petroleum Geoscience if you choose not to undertake the project.
The programme has been developed by academics within the Department of Earth Sciences at Royal Holloway using the material and experience from the campus-based Petroleum Geoscience MSc course that has been running since 1985. The Royal Holloway Earth Sciences Department achieved an 'excellence' rating for teaching quality and 70% of our research was graded as world-leading or internationally excellent in the 2008 Research Assessment Exercise.
Many graduates of the campus-based MSc are now well-established, successful industry professionals with careers ranging from national oil companies to geoscience IT and consultancy to academia.
This course is offered online with each module running with tutor support for a three month period during the academic year, and available the rest of the time for preview and revision. This online structure enables you to fit your studies around work and family commitments. To complete an MSc in a three year period you will need to study an average of 20 hours per week during the academic session.
Fully supported by a Virtual Learning Environment, you will have the opportunity for interaction with online tutors to discuss course material and exercises; a virtual student cafe allows you to interact and network with other students.
If you have any questions, please contact our Student Advice Centre.
Please visit the school website for detailed information about the course.
Please vist the school website for further information.
The course unit details given below are subject to change, and are the latest example of the curriculum available on this course of study.
Please visit the school website for information on funding opportunities.
Practical support and advice for current students and applicants is available from the Disability Advisory and Support Service. Email: [email protected]
The petroleum industry is the largest employer of earth science graduates, with good employment prospects in the United Kingdom and overseas in oil companies, consultancies, service companies, government bodies, the financial sector, and in teaching and research. During the research project students normally have the opportunity to work within sponsor oil company offices, gaining valuable industrial experience. The MSc course has a very strong track record for employability.
In semester 1, we typically have oil companies visiting the School to provide careers information and seek applications (typically BG, BP, Shell, ConocoPhillips, Exxon, Hess, Talsiman, Neftex, Fugro etc). Some also interview in the University. This is in addition to the University career fairs and other employment events.
Petroleum Geoscience and Engineering at the University of Manchester has well-established links with the petroleum industry. Research is funded by a large number of international oil companies. Guest speakers are invited on a regular basis to the department. There is also an AAPG Student Chapter , PESGB Student Chapter, SPE Chapter and EAGE Chapter, which arrange meetings throughout the year.
Many of the academic staff teaching on the course have considerable petroleum industry experience or consult for the oil industry. In addition the teaching team has a very strong group of external lecturers, who are all active consultants or employees in the petroleum industry, and who bring considerable expertise and industrial links.
BP staff teach on the course, Shell teaches the Malampaya oil game which offers an insight into the industry.