• University of Glasgow Featured Masters Courses
  • Swansea University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of York Featured Masters Courses
  • University of Leeds Featured Masters Courses
London School of Hygiene & Tropical Medicine Featured Masters Courses
Leeds Beckett University Featured Masters Courses
Southampton Solent University Featured Masters Courses
FindA University Ltd Featured Masters Courses
Cardiff University Featured Masters Courses
"motion" AND "analysis"×
0 miles

Masters Degrees (Motion Analysis)

  • "motion" AND "analysis" ×
  • clear all
Showing 1 to 15 of 59
Order by 
This programme is delivered by the Institute of Motion Analysis & Research within the Department of Orthopaedic & Trauma Surgery at the TORT Centre. Read more
This programme is delivered by the Institute of Motion Analysis & Research within the Department of Orthopaedic & Trauma Surgery at the TORT Centre.

The Institute of Motion Analysis and Research (IMAR) was established in 2003 by combining the Foot Pressure Analysis Laboratory and the Dundee Gait Laboratory at the Orthopaedic and Trauma Surgery Department, University of Dundee. However, gait analysis has been at the forefront of development in this field for the past 25 years and foot pressure measurement for the past 16 years, which gives us a tremendous bank of knowledge on which to draw. IMAR's main goal is to promote excellence in teaching and research and to provide a comprehensive clinical service in the field of motion analysis.

A third laboratory dedicated to Sports Biomechanics is currently nearing completion to augment and support the current facilities of IMAR.

In the 2008 Research Assessment Exercise, to reflect the multi-disciplinary aspect of the research carried out, the respective staff at IMAR were returned into Unit of Assessment 25 (General Engineering - Biomedical Engineering) and Unit of Assessment 8 (Primary Care and Other Community Based Clinical Subjects) where 90% and 85% of our quality profile was deemed of international class. This is an excellent outcome taking into consideration that IMAR was only established in 2003.

Aims of the Programme

The programme is intended to provide students with an understanding and knowledge of the technological aspects, and the fundamental and advanced concepts of motion measurement and clinical analysis.

Programme Content

This is a modular course, which includes a foundation module, plus the following subjects:
Motion Measurement
Fundamentals in Motion Analysis
Advanced Motion Analysis
For more details, visit the course website.

In addition, those studying for an MSc undertake a research project in a relevant area.

Methods of Assessment

The modules are assessed by a combination of written examination and continuous assessment. In addition, the research project, undertaken by those studying towards an MSc, is assessed by dissertation and oral examination.

Coursework:
At the end of each unit you submit an assignment to your tutor for assessment, along with an assignment card containing a signed declaration that the work submitted is your own. A copy of the assignment is returned to you with your marks and the original is retained by the University. The assignments form the coursework element of the final assessment for both courses.

Examinations:
Written examinations are held during March/ April each year in Dundee. Under special circumstances exams can also be sat by arrangement at approved examination centres (for example, at British Council Offices) outside, and in the United Kingdom. If you sit an examination outside Dundee you will be responsible for paying any costs the examination centre may charge

You must complete all the modules in a module group, including the assignment, before you can sit the exam(s) for that particular group. You may choose to sit all the exams at one time or spread them throughout your course .

Dissertation:
The MSc project is assessed by dissertation and viva (oral examination). Vivas are held in Dundee.

Available Courses

MSc (distance learning) - Normally up to 36 months £8,650
PGDip (distance learning) - Normally up to 36 months* £5,650
PGCert (distance learning) - Normally up to 18 months £2,825
MSc (in house) 12 months - £10,000

If taken in-house, the start date for this course is September. The distance learning start date can be at any point in the year.
*PG Dip to be normally completed in 24 months if the MSc is being considered.

Read less
The MCh Orth Course in Dundee (accredited by the Royal College of Surgeons of England) is a clinically-based Masters degree that encompasses taught, clinical attachment and research elements, which provide orthopaedic surgeons with in-depth knowledge of the latest advances in surgical and biomechanical techniques. Read more
The MCh Orth Course in Dundee (accredited by the Royal College of Surgeons of England) is a clinically-based Masters degree that encompasses taught, clinical attachment and research elements, which provide orthopaedic surgeons with in-depth knowledge of the latest advances in surgical and biomechanical techniques.

In the 2008 Research Assessment Exercise, to reflect the multi-disciplinary aspect of the research carried out at IMAR, where the majority of the MCh Orth projects are conducted, the respective staff were returned into Unit of Assessment 25 (General Engineering - Biomedical Engineering) and Unit of Assessment 8 (Primary Care and Other Community Based Clinical Subjects) where 90% and 85% of our quality profile was deemed of international class. This is an excellent outcome taking into consideration that IMAR was only established in 2003 in support of the MCh Orth course.

Why study Orthopaedic Surgery at Dundee?

There are six key reasons:
- Course accredited by the Royal College of Surgeons of England
- Best lecturing faculty drawn from specialists across the entire UK
- Best research experience in clinical and biomechanics in association with the Institute of Motion Analysis and Research, one of the leading facilities in biomechanics and motion analysis worldwide
- Associated clinical attachment with a consultant orthopaedic surgeon with no need for GMC registration
- Our MCh Orth philosophy is to recruit ambitious orthopaedic surgeons with career aspirations that encompass leadership, academic excellence and the highest levels of skill and expertise
- Our successful MCh Orth graduates value education and recognise the need for professional reflection and lifelong learning to deepen their understanding, and to enhance their ability and develop a sound professional judgement

We have been successfully educating orthopaedic surgeons for 20 years and to date we have over 350 graduates. We continue to offer the highest standard of visiting external lecturer and orthopaedic lecture topics to be found anywhere and on any other similarly titled course; arthritis, foot and ankle, gait and motion analysis, hand and wrist, biomechanics, hip and knee, paediatrics, imaging techniques, shoulder and elbow, trauma, wheelchairs and seating systems, spine, research, statistical analysis and many other associated specialities.

What's so good about studying Orthopaedic Surgery at Dundee?

This programme is delivered by the Department of Orthopaedic & Trauma Surgery and the Institute of Motion Analysis & Research within the School of Medicine.

"It was a great learning experience. Coming here, my overall personality has changed. I have learnt the right way to write thesis and also got to know the recent advancements in field of Orthopaedic surgery."
International Student Barometer, 2009

How you will be taught

You will be taught via lectures, tutorials, multi-media demonstrations, dry bone workshops, anatomy demonstrations, clinical and operating theatre attachments, and hands-on latest surgical techniques using Thiel embalming cadavers, which is unique to Dundee in the whole of the UK.

What you will study

Bioengineering material will provide you with basic science and permitting you, as clinicians, to associate with clinical engineering materials to compliment your clinical knowledge. A formal programme of lectures, tutorials, multi-media demonstrations, dry bone workshops, anatomy demonstrations, clinical and operating theatre attachments, and hands on latest surgical techniques (using

Thiel Embalming cadavers, which is unique to Dundee in the whole of the UK) are provided and these include:
Foot and Ankle
Hand and Wrist
Hip and Pelvis
Knee
Paediatric Orthopaedics
Shoulder and Elbow
Spine
Trauma
Tumour
Infection
Pathology
Disability Medicine
Biomechanics
Implants
Introduction to Mechanics
Orthopaedic Technology
Statistics in Medical Research
Mechanics of Materials
Orthotics
Prosthetics
Seating and Wheelchairs
Foot Pressure Analysis
Gait Analysis
Motion Analysis
Sports Injury

How you will be assessed

The programme assessment is made up of three elements: two written MCQs (one per semester) using the latest e-assessment technology and iPads, OSCE and a thesis. Candidates will be examined orally on the subject of thesis by a committee consisting of a convenor, an external and internal examiners. Students are required to pass each element to qualify for the award of the degree. There is no resit facility.

Careers

Many of our MCh Orth graduates have gone on to highly successful careers once returned to their own countries with many taking up new challenges and opportunities within the UK up to Consultant position. Several have published widely in journals and at conferences and have even gone onto Fellowships throughout Europe and employment in the UK.

This unique MCh Orth course offers a truly wide ranging curriculum that will help you to achieve your career goals no matter what your speciality. Our distinguished visiting lecturers are specialists at the forefront of innovative orthopaedics and continue to return each year to teach as they understand the value and benefit of this course to working surgeons. They care deeply about the course and what it has achieved over the last twenty years and without their support we would not have been able to be so successful.

Read less
This UK masters in Sports and Biomechanical Medicine programme is designed to cover a wide variety of sport-related topics including. Read more
This UK masters in Sports and Biomechanical Medicine programme is designed to cover a wide variety of sport-related topics including:

research design and medical statistics
measurement systems in motion analysis
biomechanics in sport
sports injury management and rehabilitation
dissertation on a substantive laboratory-based or focused research project in the field of sports rehabilitation and biomechanics

We offer you a wide ranging curriculum that will help you to achieve your career goals no matter what your speciality. Our distinguished visiting lecturers are specialists at the forefront of sport, sports injury, biomechanics, exercise physiology and other sports medicine related areas. You will have access to:

Fully equipped Sports Lab (Institute of Motion Analysis and Research)
Opportunities to publish your research in peer-reviewed sports journals
Lectures from leading multi-disciplinary teaching faculty from medicine, sports and biomechanics
Close working relationships with the University of Dundee's Institute of Sports & Exercise (ISE)
Facilities within Ninewells, a large, modern teaching hospital

Graduates from this sports MRes will be able to use their skills and knowledge to successfully increase their level of integration of sport and exercise medicine within their respective professions and disciplines at an advanced practitioner level. Graduates will be able to contribute to team work with a greater understanding of the inter-relationship between movement mechanisms, the fundamental nature of human performance at all levels and clinical outcome.

Aims of the programme

After completing the course, you will be able to demonstrate:

Expert knowledge on the roles of physical activity and sports exercise in rehabilitation.
The means and techniques to ensure athletes and sports people can perform to their maximum capacity whilst limiting the injury process.
The ability to use your skills and knowledge to successfully increase your level of integration of sport, biomechanics, exercise medicine and rehabilitation within your respective profession or discipline.
The skills and knowledge to undertake a substantive research project in your specialty. You will gain new insights and also the foundations for studying for a higher research degree.

What you will study

The MRes programme consists of five mandatory modules.

Taught modules: 90 credits

Research Project: 90 credits

Module 1: Research Design and Medical Statistics
Module 2: Biomechanics in Sport
Module 3: Measurement Systems in Motion Analysis
Module 4: Management of Soft Tissue and Sports Injuries and Rehabilitation
Module 5: Research Project
After completing the research project, the Master of Research (a minimum of 180 credits) will be awarded.

How you will be taught

Teaching of this MRes Sports Biomechanics and Rehabilitation will primarily be through a combination of flexible learning modules and formal lectures.

Assignments and coursework will foster the development of an enquiry-led, self-directed student approach to learning.

Assessment of modules 1-4 will be by examination upon completion of each individual module and a summative assessment on completion of all four modules. Assessment is weighted - 80% exam and 20% coursework.

During the research project, learning will be partly experiential, partly directed and partly self-directed. The research project will be assessed through the presentation of a dissertation, and the final mark will be moderated through an oral exam in Dundee (90 credits).

Careers

This MRes Sports Biomechanics and Rehabilitation will prepare graduates for a research-focused clinical graduate career in either the NHS or academia, and is particularly well positioned to prepare for entry into a clinical academic career path if you are a clinical graduate. Those students not already in academia or the NHS will broaden their scope of being able to do so and additionally benefit from the multitude of opportunities in the public and private sectors involving sport and exercise.

Read less
The programme is suitable for physiotherapists, osteopaths and doctors. This internationally renowned programme is open to doctors and physiotherapists. Read more
The programme is suitable for physiotherapists, osteopaths and doctors.

This internationally renowned programme is open to doctors and physiotherapists. As the longest-established Sports and Exercise Medicine MSc in the country, we have a prestigious history. The programme is based on the philosophy of total care for the athlete and the promotion of physical activity in the general population. Working in sport is a largely practical discipline and the programme's emphasis lies firmly on regular clinical experience. You will benefit from regular contact with members of the Centre for Sports and Exercise Medicine as well as visiting clinicians and lecturers who are experienced sport medicine specialists.

The Centre is ideally situated on the same campus as the sports injury, physiotherapy, podiatry and the interdisciplinary combined sports clinics. Additionally, you will have the opportunity to attend recognised external clinics around London, as well as the chance to attend sporting events and visits to national centres of excellence where possible.

Successful alumni have gone on to hold pivotal positions in sports medicine across the UK and internationally, including the Chief Medical Officer to the British Olympic Association and London 2012 and the Medical Director to the English Institute of Sport.

The Centre is renowned in the UK for its academic strength and excellence. Lectures are delivered by national experts; from cutting edge scientists to physiotherapists, doctors, and other health professionals working with world-class athletes.

An insightful video for prospective students interested in the Sports and Exercise Medicine programmes.

This programme will:

-Offer you mastery of foundation concepts and skills in Sports and Exercise Medicine.
-Give you the knowledge and skills to assess sports injuries and to understand their treatment options, as well as understanding the physiological and psychological benefits of exercise and its use as a health tool.
-Allow you regular clinical contact with athletes and sportspeople.
-Introduce you to visiting lecturers, who are experts in the field of Sports Medicine.

Why study your MSc in Sport and Exercise Medicine at Queen Mary?
The Centre for Sports and Exercise Medicine is based at the William Harvey Research Institute at Barts and The London School of Medicine and Dentistry.

Barts and the London School of Medicine and Dentistry is comprised of two world renowned teaching hospitals, St Bartholomew’s and The Royal London, which have made, and continue to make, an outstanding contribution to modern medicine. We were one of the top five in the UK for medicine in the 2008 Research Assessment Exercise.

It is unique in the UK for the delivery of integrated academic and practical tuition. Lectures are delivered by national experts.
Core clinician-scientists on staff consult to elite athletes, we have an international research profile in Sports and Exercise Medicine.
Our staff will work closely with you to nurture your research interests and to develop your clinical ability in Sports and Exercise Medicine.

Many students also go on to publish in peer-reviewed journals, a reflection of the quality of our student research output.
Facilities

You will have access to Queen Mary’s comprehensive libraries, including the Postgraduate Reading Room, and The British Library can also be accessed as a research resource. We subscribe to many journals in sport and exercise medicine. You can access electronic journals online.

The Human Performance Laboratory (HPL) at QMUL combines the expertise of sports medicine clinicians, surgeons, engineers and sports scientists with state-of-the-art physiological testing and motion analysis equipment. This collaborative venture offers clinical, educational, research and athlete support service applications in the laboratory or field based settings.

The capabilities of the HPL can be broadly divided into two areas: musculoskeletal biomechanics and physiological testing.

Musculoskeletal biomechanics
The HPL carries 4 Codamotion Cx1 infra-red scanning units that are used extensively for 3-dimensional motion analysis. This system is fully integrated with 2 ground embedded Kistler force plates and a 16 channel wireless EMG system. The integration of these systems allows for full analysis of movement, forces associated with movement and measuring muscular effort during movement. In addition, the HPL also boasts a 64 channel EMG system for multichannel work and an isokinetic dynamometer, which can be used for both research and rehabilitation.

Physiological testing
Detailed analysis of pulmonary gas exchange can be made using an online gas analysis system, in addition to cardiac monitoring using a 12-lead ECG system, during exercise on a treadmill or the electromagnetically braked cycle ergometer. Measures can also be made out in the field, from simple tests of flexibility, strength, speed, power and cardiorespiratory fitness, to comprehensive measurement of expired air using the portable on-line gas analysis system.

Papers of interest

-In Vivo Biological Response to Extracorpereal Shockwave Therapy in Human Tendinopathy (paper is called ESWT)
-The role of interventions directed at the foot for managing patellofemoral pain (paper is called InTouch Article)
-The biomechanics of running in athletes with previous hamstring injury: A case-control study (Hamstrings paper)
-The ‘Best Practice Guide to Conservative Management of Patellofemoral Pain’: incorporating level 1 evidence with expert clinical reasoning (PFP paper)
-Eccentric and Concentric Exercise of the Triceps Surae: An In Vivo Study of Dynamic Muscle and Tendon Biomechanical Parameters (JAB EL CL paper)

Read less
This conversion course is designed for students who intend to become professional psychologists. Read more
This conversion course is designed for students who intend to become professional psychologists. The main purpose of the course is to allow graduates in disciplines other than psychology, and psychology graduates whose undergraduate degree is not professionally recognised, to gain a qualification in psychology that confers eligibility for graduate membership of the British Psychological Society (BPS) and establishes the Graduate Basis for Chartered Membership (GBC).

See the website http://www.brookes.ac.uk/courses/postgraduate/psychology-msc/

Why choose this course?

- Oxford Brookes has one of the largest groups of developmental psychologists in the UK along with expertise in cognitive neuroscience and qualitative methods.

- Our professionally accredited courses allow chartered membership of the British Psychological Society.

- State-of-the-art facilities including a video observation lab, Babylab, perception and motion analysis (PuMA) lab and perception lab.

- A comprehensive programme of research seminars offered by the department as well as specialist seminars organised by individual research groups.

- Dedicated study and social-working space for postgraduate students.

Teaching and learning

The programme is taught through a combination of lectures, research seminars, workshops, tutorials, supervised seminar presentations, and independent reading and research. Diverse teaching methods are employed to aid the quality of learning opportunities for students' understanding of psychology.

Approach to assessment

Summative assessment methods include:
- coursework assessments
- individual and/or group presentations
- class tests
- exam grades.

Formative assessment methods include:
- coursework feedback processes
- informal tutor discussion
- peer feedback.

Specialist facilities

The Department of Psychology, Social Work and Public Health boasts state-of-the-art facilities including a video observation lab, Babylab, Perception and Motion Analysis (PuMA) labction research lab, visual perception lab (incorporating eye tracking technology), and an EEG suite. In addition, postgraduate students have a dedicated study and social working space to facilitate group projects and provide a venue for our research seminar series.

Careers

The department offers advice on future career opportunities including practical help with applications to future training and employment. For many of our students, their MSc is a stepping stone to professional training for careers in psychology (eg educational, occupational and clinical psychology). Some choose to continue their academic studies, progressing to PhD.

Free language courses for students - the Open Module

Free language courses are available to full-time undergraduate and postgraduate students on many of our courses, and can be taken as a credit on some courses.

Please note that the free language courses are not available if you are:
- studying at a Brookes partner college
- studying on any of our teacher education courses or postgraduate education courses.

Read less
This programme aims to provide you with further knowledge of the scientific concepts and procedures underpinning sport and exercise related musculoskeletal function, measurement, injury and treatment. Read more
This programme aims to provide you with further knowledge of the scientific concepts and procedures underpinning sport and exercise related musculoskeletal function, measurement, injury and treatment.

The programme will allow you to adopt a multidisciplinary approach to the scientific study of sport and exercise related musculoskeletal health and performance including anatomy, physiology, biomechanics, bioengineering, and kinesiology. You will have the opportunity to carry out in-depth and critical research in selected areas of interest.

Core study areas include orthopaedic biomechanics, neuromuscular function, physiology of exercise and sport, immediate and pre-hospital care of the injured athlete, research methods for sport and exercise, basic science and regenerative therapy, emerging technologies for health and wellbeing, motion analysis of human movement, developing computer models for sports biomechanics, sports injury, and a research project.

This course is delivered under the auspices of the National Centre for Sport and Exercise Medicine – East Midlands (NCSEM-EM), and is primarily taught at Loughborough University. The NCSEM-EM is an Olympic legacy funded project aimed at improving the health and wellbeing of the nation. The course is delivered in conjunction with The University of Nottingham with some teaching at the Queen’s Medical Centre.

See the website http://www.lboro.ac.uk/study/postgraduate/programmes/departments/ssehs/musculoskeletal-sport-science-health/

Programme modules

Programme Modules:
Semester 1
- Orthopaedic Biomechanics
- Neuromuscular Function
- Physiology of Exercise and Sport
- Immediate and Pre-Hospital Care of the Injured Athlete (continues into semester 2)
- Research Methods for Sport and Exercise

Semester 2
- Basic Science and regenerative therapy
- Emerging Technologies for Health and Wellbeing
- Motion analysis of human movement
- Developing Computer Models for Sports Biomechanics
- Sports Injury
- Research Project

Assessment

Coursework and examination, project reports and research project.

Careers and further study

Typical destinations include teaching in further and higher education, sports science support with the English Institute of Sport, working in rehabilitation and exercise therapy, working with professional sports organisations, research and PhD study.

Why choose sport, exercise and health sciences at Loughborough?

Staff within the School are renowned internationally for the quality of their teaching and research, which has influenced policy and practice around the world.

Knowledge gained from our research underpins the teaching and variety of learning experiences offered through the School’s comprehensive range of postgraduate taught and research degrees.

Our staff expertise, combined with on-going investment in buildings, teaching facilities, laboratories and equipment, makes the School of Sport, Exercise and Health Sciences a stimulating, multidisciplinary environment in which to study.

- Research
Research within the School is classified broadly into three themes: Performance in sport, Lifestyle for health and well-being, and Participation in sport and exercise.

- Career prospects
Over 92% of our graduates were in employment and/or further study six months after graduating. They go on to work with companies such as APR Psychology, Adidas, BUPA, Badminton England, British Red Cross, Ministry of Education, KPGM, Lucozade, NHS, Nuffield Health and Youth Sport Trust.

Find out how to apply here http://www.lboro.ac.uk/study/postgraduate/programmes/departments/ssehs/musculoskeletal-sport-science-health/

Read less
The programme is suitable for physiotherapists, osteopaths and doctors. This internationally renowned programme is open to doctors and physiotherapists. Read more
The programme is suitable for physiotherapists, osteopaths and doctors.

This internationally renowned programme is open to doctors and physiotherapists. As the longest-established Sports and Exercise Medicine MSc in the country, we have a prestigious history. The programme is based on the philosophy of total care for the athlete and the promotion of physical activity in the general population. Working in sport is a largely practical discipline and the programme's emphasis lies firmly on regular clinical experience. You will benefit from regular contact with members of the Centre for Sports and Exercise Medicine as well as visiting clinicians and lecturers who are experienced sport medicine specialists.

The Centre is ideally situated on the same campus as the sports injury, physiotherapy, podiatry and the interdisciplinary combined sports clinics. Additionally, you will have the opportunity to attend recognised external clinics around London, as well as the chance to attend sporting events and visits to national centres of excellence where possible.

Successful alumni have gone on to hold pivotal positions in sports medicine across the UK and internationally, including the Chief Medical Officer to the British Olympic Association and London 2012 and the Medical Director to the English Institute of Sport.

The Centre is renowned in the UK for its academic strength and excellence. Lectures are delivered by national experts; from cutting edge scientists to physiotherapists, doctors, and other health professionals working with world-class athletes.

This programme will:

-Offer you mastery of foundation concepts and skills in Sports and Exercise Medicine.
-Give you the knowledge and skills to assess sports injuries and to understand their treatment options, as well as understanding the physiological and psychological benefits of exercise and its use as a health tool.
-Allow you regular clinical contact with athletes and sportspeople.
-Introduce you to visiting lecturers, who are experts in the field of Sports Medicine.

Why study your MSc in Sport and Exercise Medicine at Queen Mary?
The Centre for Sports and Exercise Medicine is based at the William Harvey Research Institute at Barts and The London School of Medicine and Dentistry.

Barts and the London School of Medicine and Dentistry is comprised of two world renowned teaching hospitals, St Bartholomew’s and The Royal London, which have made, and continue to make, an outstanding contribution to modern medicine. We were one of the top five in the UK for medicine in the 2008 Research Assessment Exercise.

This programme is the longest-established Sports and Exercise Medicine MSc in the country.

It is unique in the UK for the delivery of integrated academic and practical tuition. Lectures are delivered by national experts.
Core clinician-scientists on staff consult to elite athletes, we have an international research profile in Sports and Exercise Medicine.
Our staff will work closely with you to nurture your research interests and to develop your clinical ability in Sports and Exercise Medicine.

Many students also go on to publish in peer-reviewed journals, a reflection of the quality of our student research output.
Facilities

You will have access to Queen Mary’s comprehensive libraries, including the Postgraduate Reading Room, and The British Library can also be accessed as a research resource. We subscribe to many journals in sport and exercise medicine. You can access electronic journals online.

The Human Performance Laboratory (HPL) at QMUL combines the expertise of sports medicine clinicians, surgeons, engineers and sports scientists with state-of-the-art physiological testing and motion analysis equipment. This collaborative venture offers clinical, educational, research and athlete support service applications in the laboratory or field based settings.

The capabilities of the HPL can be broadly divided into two areas: musculoskeletal biomechanics and physiological testing.

Musculoskeletal biomechanics

The HPL carries 4 Codamotion Cx1 infra-red scanning units that are used extensively for 3-dimensional motion analysis. This system is fully integrated with 2 ground embedded Kistler force plates and a 16 channel wireless EMG system. The integration of these systems allows for full analysis of movement, forces associated with movement and measuring muscular effort during movement. In addition, the HPL also boasts a 64 channel EMG system for multichannel work and an isokinetic dynamometer, which can be used for both research and rehabilitation.

Physiological testing

Detailed analysis of pulmonary gas exchange can be made using an online gas analysis system, in addition to cardiac monitoring using a 12-lead ECG system, during exercise on a treadmill or the electromagnetically braked cycle ergometer. Measures can also be made out in the field, from simple tests of flexibility, strength, speed, power and cardiorespiratory fitness, to comprehensive measurement of expired air using the portable on-line gas analysis system.

Read less
The MSc Applied Sports Performance Analysis has been specifically designed to provide you with the knowledge and skills demanded of Performance Analysts on entering employment. Read more
The MSc Applied Sports Performance Analysis has been specifically designed to provide you with the knowledge and skills demanded of Performance Analysts on entering employment.

In particular, you will find that you will be engaged in a wide range of applied activities and scenarios that require you to think creatively, solve problems, and utilise the knowledge you have gained as you progress through your studies. The development of applied skills in performance analysis forms the core of this programme with a significant part of the programme being vocationally based.

Key Features

- Full or part-time options, with a flexible modular scheme so that you can study at your own pace
- Heavy emphasis on development and application of the applied skills of a performance analyst
- Strong links to professional sports clubs and organisations
- Flexible approach to teaching and learning (amalgamation of online and face-to-face learning environments)
- Excellent facilities, including two performance analysis laboratories, Motion & Performance Centre, McClelland Health & Wellbeing Centre, 2,000-seat sports arena, two indoor sports centres, floodlit 3G astro, floodlit synthetic pitch, exercise physiology suite (BASES accredited), sports science laboratories, gymnasia and dance studio

This course is delivered through flexible and distributed learning which means that instead of meeting in a traditional face-to-face classroom over the course of this semester, a majority of our class time will be spent participating in small group, on-line discussions and activities.

These fortnightly, on-line discussions and activities require you to engage with both tutors and peers to support and guide your learning. The online activities are supplemented by two blocks of one-week intensive teaching here at UW (currently delivered in September and January). The remainder of the modules can be accessed, studied and assessed from anywhere in the World meaning you are not tied to one location, reflecting the demands of the modern day performance analyst.

Read less
Produce high quality original research in the areas of sport, exercise, nutritional and health sciences. This programme provides an excellent platform for progression to PhD-level study as well as other related career paths. Read more

Summary

Produce high quality original research in the areas of sport, exercise, nutritional and health sciences. This programme provides an excellent platform for progression to PhD-level study as well as other related career paths.

This programme is for students who want to focus on a research topic with a view to create new knowledge within the growing area of sport and exercise science. You will be guided by experts in the field who will support you to produce high quality original research.

You will have the opportunity to work with state-of-the-art equipment in the laboratories. Our expertise will allow students to employ the latest techniques in the pursuit of producing significant and original research that is publishable. Some of the techniques include modified ELISA’s, Real-Time PCR, Western Blot, isotope methodology for metabolism, 2-3D motion analysis using MaxTRAQ and Vicon, force analysis using Kistler force plates and isokinetic dynamometers, muscle ultrasound, and neuromuscular electrical stimulation.

You will automatically gain access to our research community in the Sport and Exercise Science Research Centre (SESRC) and Health Sciences Research Centre (HSRC). The research centres are active in researching diabetes, obesity, diseased and healthy metabolism, neuromuscular function, biomechanics in elite and pathological populations, environmental physiology, nutrition in athletic and chronic diseased populations, protein synthesis and muscle growth, sport & exercise psychology and performance and well-being.

Content

The key modules on this course revolve around you producing a high-level independent research project, which will prepare you for higher levels of research and study.

The course begins with a research methods module which will equip you with a comprehensive understanding of different approaches to research, allowing you to choose the correct method for your project, depending on your specific area of interest. You will study key philosophical questions as to the nature of science and knowledge, and develop a critical awareness of the principles and practice of qualitative and quantitative approaches and techniques. You will also be introduced to the management of ethical issues associated with collecting and analysing data on human participants.

You will also be guided on the development of your research proposal, and be invited to attend the Sport Science Seminars Series to frame your understanding of current sport-related research.

Other modules on the programme allow you to study more in-depth knowledge and gain relevant practical skill in biomechanics, psychology, and/or physiology that are invaluable for your dissertation project.

Read less
Running continuously for over 50 years, our Masters in Biomedical Engineering is one of the longest-established in the world, giving a breadth of expertise with a focus on solving real-world, biomedical problems. Read more
Running continuously for over 50 years, our Masters in Biomedical Engineering is one of the longest-established in the world, giving a breadth of expertise with a focus on solving real-world, biomedical problems.

You’ll benefit from access to world-leading experts and teaching in state-of-the-art facilities, such as the new £12m “Engineering for Health” facility.

PROGRAMME OVERVIEW

In the first semester of the programme, graduates from a range of backgrounds are brought up-to-speed on core knowledge in engineering, biology and research practice.

This is followed by specialist modules in the second semester on human movement analysis, prostheses, implants, physiological measurements and rehabilitation, as well as numerous computer methods applied across the discipline.

The course makes use of different approaches to teaching, including traditional lectures and tutorials, off-site visits to museums and hospitals, and lab work (particularly in the Human Movement and Instrumentation modules).

The core lecturing team is supplemented by leading figures from hospitals and industry.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time over two academic years. It consists of eight taught modules and a research project.

All modules are taught on the University main campus, with the exception of visits to the health care industry (e.g. commercial companies and NHS hospitals). The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.
-Human Biology Compulsory
-Instrumentation Compulsory
-Biomechanics Compulsory
-Professional and Research Skills
-Computer Methods in Biomedical Research
-Medical Implants and Biomaterial Applications
-Human Movement and Rehabilitation
-Biomedical Sensors and Signals
-Research Project

EDUCATIONAL AIMS OF THE PROGRAMME

The course aims:
-To educate engineering, physical science, life science, medical and paramedical graduates in the broad base of knowledge required for a Biomedical Engineering career in industry, healthcare or research in the United Kingdom, Europe and the rest of the world
-To underpin the knowledge base with a wide range of practical sessions including laboratory/experimental work and applied visits to expert health care facilities and biomedical engineering industry
-To develop skills in critical review and evaluation of the current approaches in biomedical engineering
-To build on these through an MSc research project in which further experimental, analytical, computational, and/or design skills will be acquired

PROGRAMME LEARNING OUTCOMES

The programme provides opportunities for students to develop and demonstrate knowledge and understanding, skills, qualities and other attributes in the following areas:

Knowledge and understanding
-Demonstrate breadth and depth of awareness and understanding of issues at the forefront of Biomedical Engineering
-Demonstrate broad knowledge in Human Biology, Instrumentation, Biomechanics, and Professional and Research skills
-Demonstrate specialist knowledge in Implants, Motion analysis and rehabilitation, and Medical signals
-Understand how to apply engineering principles to conceptually challenging (bio)medical problems
-Appreciate the limitations in the current understanding of clinical problems and inherent in adopted solutions
-Understand routes/requirements for personal development in biomedical engineering including state registration
-Understand key elements of the concept of ethics and patient-professional relationships, recognise, analyse and respond to the complex ethical issues

Intellectual / cognitive skills
-Evaluate a wide range of applied engineering and clinical measurement and assessment tools
-Design and implement a personal research project; this includes an ability to accurately assess/report on own/others work with justification and relate them to existing knowledge structures and methodologies, showing insight and understanding of alternative points of view
-Carry out such research in a flexible, effective and productive manner, optimising use of available support, supervisory and equipment resources, demonstrating understanding of the complex underlying issues
-Apply appropriate theory and quantitative methods to analyse problems

Professional practical skills
-Make effective and accurate use of referencing across a range of different types of sources in line with standard conventions
-Use/ apply basic and applied instrumentation hardware and software
-Correctly use anthropometric measurement equipment and interpret results in the clinical context
-Use/apply fundamental statistical analysis tools
-Use advanced movement analysis hardware and software and interpret results in the clinical context
-Use advanced finite element packages and other engineering software for computer simulation
-Program in a high-level programming language and use built-in functions to tackle a range of problems
-Use further specialist skills (laboratory-experimental, analytical, and computational) developed through the personal research project

Key / transferable skills
-Identify, select, plan for, use and evaluate ICT applications and strategies to enhance the achievement of aims and desired outcomes
-Undertake independent review, and research and development projects
-Communicate effectively between engineering, scientific and clinical disciplines
-Prepare relevant, clear project reports and presentations, selecting and adapting the appropriate format and style to convey information, attitudes and ideas to an appropriate standard and in such a way as to enhance understanding and engagement by academic/ professional audiences

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
Located within a European Centre of Excellence for Tissue engineering, and based on Keele University’s local hospital campus, the MSc in Cell and Tissue Engineering provides support and development to enhance your career within this rapidly expanding field. Read more

Overview

Located within a European Centre of Excellence for Tissue engineering, and based on Keele University’s local hospital campus, the MSc in Cell and Tissue Engineering provides support and development to enhance your career within this rapidly expanding field. The multidisciplinary environment enables close interaction with leading academics and clinicians involved in cutting-edge, and clinically transformative research.

Course Director: Dr Paul Roach ()

Studying Cell and Tissue Engineering at Keele

Our MSc Cell and Tissue Engineering programme has tracked alongside the strongly emergent global Regenerative Medicine industry and will prepare you for an exciting future within a range of medical engineering areas, be that in academic or industrial research, medical materials, devices, or therapeutics sectors, or in the clinical arena. The modular structure to the course enables flexibility and personalisation to suit your career aspirations, build upon strengths and interests and develop new understanding in key topics. The selection of modules on offer is professionally accredited by the Institute for Physics and Engineering in Medicine.

Graduate destinations for our students could include: undertaking further postgraduate study and research (PhD); pursuing a university-based, academic research career; providing technical consultancy for marketing and sales departments within industry; working within biomedical, biomaterials, therapeutic and regenerative medicine industries or working for a governmental regulatory agency for healthcare services and products.

See the website https://www.keele.ac.uk/pgtcourses/cellandtissueengineering/

‌The course provides support from the basics of human anatomy and physiology, through to development of novel nanotechnologies for healthcare. Due to the teaching and research involvement of clinical academic staff within the department, there are exciting opportunities to be exposed to current clinical challenges and state-of-the-art developments. Clinical visits and specialist seminars are offered and students will be able to select dissertation projects that span fundamental research to clinical translation of technologies – a truly ‘bench to bedside’ approach.

Learning and teaching methods include lectures and demonstrations from medical and engineering specialists, practical classes using state-of-the-art facilities and seminars with leading national and international researchers. Full-time study will see the course completed in 12 months; part-time study will allow you to complete it over two years.

About the department

Now delivered through the Keele Medical School and the Research Institute for Science and Technology in Medicine, the course dates as far back as 1999, when it was established in partnership with Biomedical Engineering and Medical Physics at the University Hospital. Most teaching now takes place in the Guy Hilton Research Centre, a dedicated research facility located on the hospital campus. The medical school is one of the top-ranked in the UK, and the research institute has an international reputation for world-leading research.

The centre was opened in 2006 and offers state-of-the-art equipment for translational research including newly-developed diagnostic instruments, advanced imaging modalities and additive manufacturing facilities. Its location adjacent to the university hospital ensures that students experience real-world patient care and the role that technology plays in that. Students also have access to advanced equipment for physiological measurement, motion analysis and functional assessment in other hospital and campus-based laboratories. The School embraces specialists working in UHNM and RJAH Orthopaedic Hospital Oswestry, covering key medical and surgical subspecialties.

The course runs alongside its sister course, the MSc in Biomedical Engineering, and an EPSRC-MRC funded Centre for Doctoral Training, ensuring a stimulating academic environment for students and many opportunities for engaging with further study and research.

Course Content

The aim of the course is to provide multidisciplinary Masters level postgraduate training in Cell and Tissue Engineering to prepare students for future employment in healthcare, industrial and academic environments. This involves building on existing undergraduate knowledge in basic science or engineering and applying it to core principles and current issues in medicine and healthcare.

Specifically, the objectives of the course are to:
- provide postgraduate-level education leading to professional careers in Cell and Tissue Engineering in industry, academia and a wide range of healthcare establishments such as medical organisations, medical research institutions and hospitals;

- provide an opportunity for in-depth research into specialist and novel areas of Biomaterials, and Cell and Tissue Engineering;

- expose students to the clinically translational environment within an active medical research environment with hands-on practical ability and supporting knowledge of up-to-date technological developments at the forefront of the field;

- introduce students to exciting new fields such as regenerative medicine, nanotechnology and novel devices for physiological monitoring and diagnostics.

Teaching and Learning Methods

The course is taught through subject-centred lectures and seminars, supported by tutorials and practical exercises. Collaborative learning and student-centred learning are also adopted giving widespread opportunity for group work and individual assignments. Students are required to conduct extensive independent study, and this is supported by full access to two libraries, online journal access and a suite of dedicated computers for exclusive use by MSc students on the course. In addition, students are supported by the guidance of a personal tutor within the department, as well as having access to university-wide support services. This includes English language support where appropriate.

Assessment

Modules will be assessed by a mixture of assessment methods, including lab reports, essays, and presentations, and final examination. This ensures the development of a range of transferrable employability skills such as time management and planning, written and verbal communication and numeracy as well as technical and subject-specific knowledge. The project dissertation forms a major component of the student’s assessed work.

Additional Costs

Apart from additional costs for text books, inter-library loans and potential overdue library fines we do not anticipate any additional costs for this postgraduate programme.

Find information on Scholarships here - http://www.keele.ac.uk/studentfunding/bursariesscholarships/

Read less
The MSc in Biomedical Engineering at Keele is a multidisciplinary course that will prepare you for an exciting career across a wide range of areas of engineering in medicine, be that in academic or industrial research, the medical devices sector or in the clinical arena. Read more

Overview

The MSc in Biomedical Engineering at Keele is a multidisciplinary course that will prepare you for an exciting career across a wide range of areas of engineering in medicine, be that in academic or industrial research, the medical devices sector or in the clinical arena. The course is professionally accredited and suitable for people with both engineering and life science backgrounds, including medicine and subjects allied to medicine.

Course Director: Dr Ed Chadwick ()

Studying Biomedical Engineering at Keele

The course will cover the fundamentals of engineering in medicine, introduce you to the latest developments in medical technology, and expose you to the challenges of working with patients through clinical visits. Learning and teaching methods include lectures and demonstrations from medical and engineering specialists, practical classes using state-of-the-art facilities and seminars with leading national and international researchers.

Graduate destinations for our students could include: delivering non-clinical services and technology management in a hospital; designing, developing and manufacturing medical devices in the private sector; working for a governmental regulatory agency for healthcare services and products; undertaking further postgraduate study and research (PhD); pursuing a university-based, academic research career; or providing technical consultancy for marketing departments.

See the website https://www.keele.ac.uk/pgtcourses/biomed/

Course Accreditation by Professional Body

The course is accredited by the Institute for Physics and Engineering in Medicine, whose aims are to ensure that graduates of accredited programmes are equipped with the knowledge and skills for the biomedical engineering workplace, be that in industry, healthcare or academic environments. Accreditation gives you confidence that the course meets strict suitability and quality criteria for providing Masters-level education in this field.‌‌‌

About the department

Now delivered through the Keele Medical School and the Research Institute for Science and Technology in Medicine, the course dates as far back as 1999, when it was established in partnership with Biomedical Engineering and Medical Physics at the University Hospital. Most teaching now takes place in the Guy Hilton Research Centre, a dedicated research facility located on the hospital campus. The medical school is one of the top-ranked in the UK, and the research institute has an international reputation for world-leading research.

The centre was opened in 2006 and offers state-of-the-art equipment for translational research including newly-developed diagnostic instruments, advanced imaging modalities and additive manufacturing facilities. Its location adjacent to the university hospital ensures that students experience real-world patient care and the role that technology plays in that. Students also have access to advanced equipment for physiological measurement, motion analysis and functional assessment in other hospital and campus-based laboratories. The School embraces specialists working in UHNM and RJAH Orthopaedic Hospital Oswestry, covering key medical and surgical subspecialties.

The course runs alongside its sister course, the MSc in Cell and Tissue Engineering, and an EPSRC and MRC-funded Centre for Doctoral Training, ensuring a stimulating academic environment for students and many opportunities for engaging with further study and research.

Course Aims

The aim of the course is to provide multidisciplinary Masters level postgraduate training in Biomedical Engineering to prepare students for future employment in healthcare, industrial and academic environments. This involves building on existing undergraduate knowledge in basic science or engineering and applying it to core principles and current issues in medicine and healthcare.

Specifically, the objectives of the course are to:
- provide postgraduate-level education leading to professional careers in biomedical engineering in industry, academia and a wide range of healthcare establishments such as medical organisations, medical research institutions and hospitals;

- provide an opportunity for in-depth research into specialist and novel areas of biomedical and clinical engineering;

- expose students to practical work in a hospital environment with hands-on knowledge of patient care involving technological developments at the forefront of the field;

- introduce students to exciting new fields such as regenerative medicine and novel technologies for physiological monitoring and diagnostics.

Teaching and Learning Methods

The course is taught through subject-centred lectures and seminars, supported by tutorials and practical exercises. Collaborative learning and student-centred learning are also adopted giving widespread opportunity for group work and individual assignments. Students are required to conduct extensive independent study, and this is supported by full access to two libraries, online journal access and a suite of dedicated computers for exclusive use by MSc students on the course. In addition, students are supported by the guidance of a personal tutor within the department, as well as having access to university-wide support services. This includes English language support where appropriate.

Assessment

Modules will be assessed by a mixture of assessment methods, including lab reports, essays, and presentations, and final examination. This ensures the development of a range of transferrable employability skills such as time management and planning, written and verbal communication and numeracy as well as technical and subject-specific knowledge. The project dissertation forms a major component of the student’s assessed work.

Additional Costs

Apart from additional costs for text books, inter-library loans and potential overdue library fines we do not anticipate any additional costs for this postgraduate programme.

Find information on Scholarships here - http://www.keele.ac.uk/studentfunding/bursariesscholarships/

Read less
Vision is the most useful sense we possess and as such accounts for about 30% of the sensing processing of the brain. Read more
Vision is the most useful sense we possess and as such accounts for about 30% of the sensing processing of the brain. The automation of visual processing (ie computer vision) has many applications in the modern world including medical imaging for better diagnosis, surveillance systems to improve security and safety, industrial and domestic robotics plus advanced interfaces for computer games, mobile phones and human-computer interfaces. The possibilities are only limited by our imagination.

Key features
-The unique combination of computer vision and embedded systems skills is highly desirable in state-of-the-art industrial applications.
-This course is accredited by BCS, The Chartered Institute for IT.
-You will have the opportunity to work on your project dissertation in the internationally recognised Digital Imaging Research Centre with groups on visual surveillance, human body motion, medical imaging and robotics and being involved in national and international projects or in collaboration with our industrial contacts.

What will you study?

The Embedded Systems (Computer Vision) pathway will equip you with the knowledge and skills required to specify and build computer vision embedded systems, choosing from different imaging devices and applying software that can process and understand images. You will study a range of option modules encompassing computing, engineering and digital media processing. It may also be possible for you to undertake a real-world project in an industrial placement or as part of high-quality research working alongside DIRC (Digital Imaging Research Centre) groups (eg visual surveillance, human body motion analysis, robotics, medical imaging).
The Embedded Systems (Computer Vision) MSc course can be combined with Management Studies enabling you to develop business and management skills so you can work effectively with business managers to develop innovative and imaginative ways to exploit computer vision and embedded systems for business advantage. This is a key skill for employability, particularly as organisations in the public, private and voluntary sectors grapple with austerity.

Assessment

Coursework and/or exams, research project/dissertation.

Work placement scheme

Kingston University has set up a scheme that allows postgraduate students in the Faculty of Science, Engineering and Computing to include a work placement element in their course starting from September 2017. The placement scheme is available for both international and home/EU students.

-The work placement, up to 12 months; is optional.
-The work placement takes place after postgraduate students have successfully completed the taught portion of their degree.
-The responsibility for finding the placement is with the student. We cannot guarantee the placement, just the opportunity to undertake it.
-As the work placement is an assessed part of the course for international students, this is covered by a student's tier 4 visa.

Details on how to apply will be confirmed shortly.

Course structure

The full MSc course consists of an induction programme, four taught modules, and project dissertation. Please note that this is an indicative list of modules and is not intended as a definitive list.

Embedded Systems (Computer Vision) MSc modules
-Digital Signal Processing
-Real-time Programming
-Artificial Vision Systems
-Project Dissertation
-One option module

Read less
Vision is the most useful sense we possess and as such accounts for about 30% of the sensing processing of the brain. Read more
Vision is the most useful sense we possess and as such accounts for about 30% of the sensing processing of the brain. The automation of visual processing (ie computer vision) has many applications in the modern world including medical imaging for better diagnosis, surveillance systems to improve security and safety, industrial and domestic robotics plus advanced interfaces for computer games, mobile phones and human-computer interfaces. The possibilities are only limited by our imagination.

Key features
-The unique combination of computer vision and embedded systems skills is highly desirable in state-of-the-art industrial applications.
-This course is accredited by BCS, The Chartered Institute for IT.
-You will have the opportunity to work on your project dissertation in the internationally recognised Digital Imaging Research Centre with groups on visual surveillance, human body motion, medical imaging and robotics and being involved in national and international projects or in collaboration with our industrial contacts.

What will you study?

The Embedded Systems (Computer Vision) pathway will equip you with the knowledge and skills required to specify and build computer vision embedded systems, choosing from different imaging devices and applying software that can process and understand images. You will study a range of option modules encompassing computing, engineering and digital media processing. It may also be possible for you to undertake a real-world project in an industrial placement or as part of high-quality research working alongside DIRC (Digital Imaging Research Centre) groups (eg visual surveillance, human body motion analysis, robotics, medical imaging).

The Embedded Systems (Computer Vision) MSc course can be combined with Management Studies enabling you to develop business and management skills so you can work effectively with business managers to develop innovative and imaginative ways to exploit computer vision and embedded systems for business advantage. This is a key skill for employability, particularly as organisations in the public, private and voluntary sectors grapple with austerity.

Assessment

Coursework and/or exams, research project/dissertation.

Work placement scheme

Kingston University has set up a scheme that allows postgraduate students in the Faculty of Science, Engineering and Computing to include a work placement element in their course starting from September 2017. The placement scheme is available for both international and home/EU students.

-The work placement, up to 12 months; is optional.
-The work placement takes place after postgraduate students have successfully completed the taught portion of their degree.
-The responsibility for finding the placement is with the student. We cannot guarantee the placement, just the opportunity to undertake it.
-As the work placement is an assessed part of the course for international students, this is covered by a student's tier 4 visa.

Details on how to apply will be confirmed shortly.

Course structure

The full MSc course consists of an induction programme, four taught modules, and project dissertation. Please note that this is an indicative list of modules and is not intended as a definitive list.

Embedded Systems (Computer Vision) MSc modules
-Digital Signal Processing
-Real-time Programming
-Artificial Vision Systems
-Project Dissertation
-One option module

Embedded Systems (Computer Vision) with Management Studies MSc modules
-Digital Signal Processing
-Real-time Programming
-Artificial Vision Systems
-Business in Practice
-Project Dissertation

Read less
We've developed this MRes Sport and Exercise course to help you make a difference to the lives of all those who take part in sport and exercise, whether that's at a professional or recreational level. Read more

Why choose this course

• We've developed this MRes Sport and Exercise course to help you make a difference to the lives of all those who take part in sport and exercise, whether that's at a professional or recreational level. To give you the best start, we've mapped our course against the quality standards of the Economic and Social Research Council (ESRC). Ours is the only MRes Sport and Exercise to have done this. As well as reassuring you of the standard of teaching and support you'll receive, we hope it will boost your employability opportunities.
• The MRes in Sport and Exercise has been designed to provide the finest possible preparation for you to undertake original research in sport and exercise.
• If you are a sport and exercise graduate or a professional working in the sector and you wish to progress and study for a doctoral degree, or enhance your career progression, then this research degree is for you.
• You will have an excellent choice of online modules so that you can tailor your study in sport and exercise.
• You'll have the opportunity to work alongside our academic team in the production of high quality research and use our state of the art facilities.
• This course opens up several career opportunities, such as consultancy, practitioner roles, sports marketing, communications, human resources, and public health. The course will also support you if you wish to progress to PhD study or work based research.

About the course

To give you the best start, we’ve mapped our course against the quality standards of the Economic and Social Research Council (ESRC). Ours is the only MRes Sport and Exercise to have done this. So as well as reassuring you of the standard of the teaching and support you’ll receive, we hope it will boost your career opportunities.

We take the view that your studies should support your current and future career aspirations and your potential. That’s why a core aspect of this course requires you to develop your own learning objectives and tailor your studies to your individual area of interest.

Professional opportunities
We have an enviable portfolio of individuals and organisations waiting to work with you across a broad spectrum of sporting practices. They include:
Derbyshire County Cricket Club
Derby County FC
West Bromwich Albion FC
The Derbyshire Institute of Sport.

Working with these and other respected organisations will provide you with unique insights and open up professional opportunities in the sport and exercise industry. We also offer the opportunity to work as a teaching assistant within the department to support the provision of our outstanding undergraduate programmes.

Excellent facilities
The facilities at Derby provide an excellent research environment. Our laboratories include technologies such as pulmonary gas and blood analysers, specialist strength and conditioning equipment, and physiological analysis and biomechanics motion analysis equipment.

You’ll have access to our new £10.8m Sports Centre, which comprises a fitness gym and associated strength and conditioning area, studios, squash and badminton courts, an internal climbing wall, sprint track, changing rooms, and treatment rooms.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X