• University of Edinburgh Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • University of York Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Imperial College London Featured Masters Courses
London Metropolitan University Featured Masters Courses
University of St Andrews Featured Masters Courses
Cass Business School Featured Masters Courses
University of Kent Featured Masters Courses
University College London Featured Masters Courses
"meng"×
0 miles

Masters Degrees (Meng)

  • "meng" ×
  • clear all
Showing 1 to 15 of 88
Order by 
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). Read more
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). The MEng is a course-based program designed for working professionals or recent graduates who want to increase their knowledge in multiple, advanced topics. The MASc program is a research-based program that allows students to progress to the PhD level upon successful completion. Graduates of the MEng program can apply to UWindsor's fast-track MASc program, which provides them with additional research-specific training and education. Program transfers are possible between the MASc and MEng programs.

MEng students will be required to complete a minimum of eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialization. Full-time students must complete this program in 3-5 semesters. Part-time students must complete within 15 semesters.

Read less
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). Read more
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). The MEng is a course-based program designed for working professionals or recent graduates who want to increase their knowledge in multiple, advanced topics. The MASc program is a research-based program that allows students to progress to the PhD level upon successful completion. Graduates of the MEng program can apply to UWindsor's fast-track MASc program, which provides them with additional research-specific training and education. Program transfers are possible between the MASc and MEng programs.

MEng students will be required to complete a minimum of eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialization. Full-time students must complete this program in 3-5 semesters. Part-time students must complete within 15 semesters.

Read less
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). Read more
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). The MEng is a course-based program designed for working professionals or recent graduates who want to increase their knowledge in multiple, advanced topics. The MASc program is a research-based program that allows students to progress to the PhD level upon successful completion. Graduates of the MEng program can apply to UWindsor's fast-track MASc program, which provides them with additional research-specific training and education. Program transfers are possible between the MASc and MEng programs.

MEng students will be required to complete a minimum of eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialization. Full-time students must complete this program in 3-5 semesters. Part-time students must complete within 15 semesters.

Read less
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). Read more
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). The MEng is a course-based program designed for working professionals or recent graduates who want to increase their knowledge in multiple, advanced topics. The MASc program is a research-based program that allows students to progress to the PhD level upon successful completion. Graduates of the MEng program can apply to UWindsor's fast-track MASc program, which provides them with additional research-specific training and education. Program transfers are possible between the MASc and MEng programs.

MEng students will be required to complete a minimum of eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialization. Full-time students must complete this program in 3-5 semesters. Part-time students must complete within 15 semesters.

Read less
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). Read more
The University of Windsor offers two master-level engineering programs — the Master of Engineering (MEng) and the Master of Applied Science (MASc). The MEng is a course-based program designed for working professionals or recent graduates who want to increase their knowledge in multiple, advanced topics. The MASc program is a research-based program that allows students to progress to the PhD level upon successful completion. Graduates of the MEng program can apply to UWindsor's fast-track MASc program, which provides them with additional research-specific training and education. Program transfers are possible between the MASc and MEng programs.

MEng students will be required to complete a minimum of eight graduate-level courses, including five from their area of specialization plus one more engineering course (from any department) and no more than two non-engineering courses. Alternatively, a student may choose to complete all eight courses within their area of specialization. Full-time students must complete this program in 3-5 semesters. Part-time students must complete within 15 semesters.

Read less
The master of engineering program at Binghamton University provides students with the balance of theory and practical knowledge necessary to be successful in the profession and is intended for students who are working full time and attending graduate school part time. Read more
The master of engineering program at Binghamton University provides students with the balance of theory and practical knowledge necessary to be successful in the profession and is intended for students who are working full time and attending graduate school part time. Students may pursue the Master of Engineering (MEng) degree in either Industrial Engineering (MEngIE) or in Systems Engineering (MEngSE). These programs can be taken entirely online via EngiNet.

Utilizing the industrial resources available in the Binghamton community, students are able to develop a realistic approach to integrating both engineering and non-engineering systems such as those found in manufacturing, healthcare, and transportation. In this way, students have the opportunity to use a wide variety of industrial and systems engineering tools such as those related to modeling and simulation, statistical process control, scheduling, human factors, and supply chain management, among others.

Graduate Degrees Offered

- MEng in Industrial Engineering
- MEng in Systems Engineering

All applicants must submit the following:

- Online graduate degree application and application fee
- Transcripts from each college/university you have attended. Note: MEng Industrial Engineering and Systems Engineering applicants should have an undergraduate major in engineering or a related field.
- Two letters of recommendation
- Personal statement (2-3 pages) describing your reasons for pursuing graduate study, your career aspirations, your special interests within your field, and any unusual features of your background that might need explanation or be of interest to your program's admissions committee.
- Resume or Curriculum Vitae (max. 2 pages)
- Official GRE scores

And, for international applicants:
- International Student Financial Statement form
- Official bank statement/proof of support
- Official TOEFL, IELTS, or PTE Academic scores

Read less
Do you want to lead society towards a more energy-efficient future, enhance your business acumen, and further develop your technical and design ability? The MEng course develops your communication and entrepreneurial skills, and prepares you for a range of high-end careers in electrical and electronic engineering. Read more
Do you want to lead society towards a more energy-efficient future, enhance your business acumen, and further develop your technical and design ability? The MEng course develops your communication and entrepreneurial skills, and prepares you for a range of high-end careers in electrical and electronic engineering. This course, which meets the full academic requirements for Chartered Engineer status, is accredited by The Institution of Engineering and Technology (IET).

Key features

Benefit from outstanding teaching: in the 2015 National Student Survey 91 per cent of our final year students said that “Overall, I am satisfied with the quality of the course”.

Draw on our strong industry links and benefit from industry participation in course development, delivery and project sponsorship.

Take part in our final year student project open day showcasing the excellence of the engineering skills development and the high levels of achievement of our undergraduates, with many industrially sponsored prizes awarded.

Develop highly practical skills and learn through doing.

Take advantage of our flexible course, allowing you to switch between electronics and robotics until your final year, as your interests develop.

Immerse yourself in a degree accredited by the Institution for Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as a Chartered Engineer (CEng).

Benefit from free IET membership (whilst at University) as the University is an IET Academic Partner.

Joining our MEng course means working towards an honours degree that provides the shortest route to professional and chartered status.

Challenge yourself. Final year MEng students work in groups to undertake a major design project that will give them the opportunity to experience a broad selection of strategic, ethical, environmental, management, operational, logistical, technical, financial, contractual and team-working challenges.

Further your knowledge with a placement after successfully completing stage 2 or between the final two years of the MEng course.

Receive an Apple iPad mini along with your core e-text books to support your learning.

Access one of the largest undergraduate laboratory spaces in the country, which you can use to further your own understanding of communications, electronics and renewable energy technologies.

Course details

In the first year you'll use our well-equipped laboratories to develop your knowledge and practical problem solving skills. From the start of your studies you'll find that there is an emphasis on learning by doing, and group project work will enable you to develop your problem solving and communication skills. An integrating project will encompass business and technical skills, and focus on activities that are typical of a start-up company.

In year 2 you'll develop a greater understanding of underlying engineering principles and circuit design methods in the second year. Again, we place an emphasis on team work and you'll have the opportunity to do both group and individual presentations of your projects. You'll use industrial standard software tools for design and simulation in preparation for your final year individual project or for your optional placement year.

You can enhance your studies with relevant experience by taking an optional placement year in the UK, France, Germany and Japan. Placements give you the opportunity to put theory into practice, and are excellent opportunity to seek final year sponsorship. Many of our graduates have been offered permanent jobs with their placement company.

Year 3 (or Year 4 if you took an optional placement year) is an exciting opportunity to develop an individual project. You'll consolidate your knowledge, explore and evaluate new technologies, and demonstrate your communication skills in the oral and written presentation of your project. Previous project have included a landmine detection system, CreatoBot (a modular robotic system) and DishDynamics (Global Ordinance And Targeting System [GOATS]).

Your final year includes additional technical modules and a large interdisciplinary design project. Past projects have included designing a product that involved a local company and a central government department, the challenge was to build a prototype system, which was showcased at the Project Open Day. This project will most likely result in the formation of a real company (later in the year). You also have the possibility of continuing your studies to MSc level in the same academic year.

Read less
The School of Engineering is proud to offer several graduate degree choices. Our research is diverse and multi-disciplinary. We are fortunate that our research has created collaboration opportunities within the University of Guelph, the Guelph community, the academic community, government, and with industry. Read more
The School of Engineering is proud to offer several graduate degree choices. Our research is diverse and multi-disciplinary. We are fortunate that our research has created collaboration opportunities within the University of Guelph, the Guelph community, the academic community, government, and with industry.

MASc Program

The MASc program offers opportunities for advanced research in the areas of Biological Engineering, Environmental Engineering, Engineering Systems and Computing and Water Resources Engineering. The MASc graduate program is research thesis based and is available in full-time as well as part-time studies. The research option provides advanced training in the engineering sciences and research methodology through a variety of applied and basic research topics and courses.

MEng Program

The MEng program offers opportunities for advanced training in the areas of Biological Engineering, Environmental Engineering, Engineering Systems and Computing and Water Resources Engineering. The MEng is coursework-based and can be taken as a full-time or part-time program of study. The coursework option provides graduates with a fuller understanding of engineering principles and a better grasp of their application to the solution of complex, practical problems.

Read less
As a graduate student in the Department of Chemical and Petroleum Engineering, you'll have the opportunity to make a difference in the world by being part of an active research community that conducts valuable research on practical problems. Read more
As a graduate student in the Department of Chemical and Petroleum Engineering, you'll have the opportunity to make a difference in the world by being part of an active research community that conducts valuable research on practical problems.

Our department attracts over $15 million each year in research funding and is internationally recognized for its research in biomedical engineering, chemical processing, energy, environment, and advanced materials.

The Schulich School of Engineering is located in Calgary, the energy capital of Canada, which gives us a strong connection to the oil and gas industry. Our professors understand the needs and challenges of the industry and can prepare students for successful careers in this growing and evolving sector.

What degree programs are offered?

Master of Science
The MSc is a research-based degree that usually takes two years of full-time study beyond a bachelor's degree.

Master of Engineering (course based)
This MEng program can be taken on either a full time or part time basis. However, it is normally expected that those enrolled in the Petroleum Specialization will complete all of their course requirements in two terms of full time study. Part time students typically require four to six years of study beyond a bachelor's degree in order to complete their course requirements.

Master of Engineering (thesis based)
This MEng program is a thesis-based degree that usually takes two years of full-time study beyond a bachelor’s degree. Note: the MEng thesis based program is temporarily suspended. This program is only offered in exceptional cases.

Read less
Taking BEng (Hons) Robotics to the next level, this MEng course digs deeper into the robotic technologies that are shaping today and tomorrow. Read more
Taking BEng (Hons) Robotics to the next level, this MEng course digs deeper into the robotic technologies that are shaping today and tomorrow. Providing an extra year of insight and training, your learning will be informed by robotics research pushing boundaries worldwide led by our very own teaching staff. You’ll build technical and managerial skills that you can put into practice daily, through a final group project that will set your course for success when you graduate.

Key features

Benefit from outstanding teaching: in the 2015 National Student Survey 91 per cent of our final year students said that “Overall, I am satisfied with the quality of the course”.

Immerse yourself in a degree accredited by the Institution for Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as a Chartered Engineer (CEng).

Keep pace with the fast-moving world of robotics, on a course that cuts a path through the latest research across technologies and disciplines.

Take the fastest route to Chartered Engineer status.

Experience learning that meets the highest standard academic requirements set by The Institution of Engineering and Technology (IET).

Undertake a major robotics design and implementation in your final project, showcasing your technical and managerial skills. Develop your technical content, legal and business skills as well as team working and project planning.

Capitalise on the opportunity to take a work placement in your second or third year, putting your robotics skills into action in the real world.

Rise to the challenge as part of the Plymouth Humanoids team, battling it out in a variety of international robot competitions.
Develop professional writing skills as well as strengthening your technical design skills.

Refine your professional project management skills, with dedicated professional support from staff across the entire final year on every different aspect of your project.

Work alongside internationally-renowned staff in a leading service and cognitive robotics research environment.

Draw on unique opportunities to engage in world-class robotics research, and in a variety of activities (for example, in the humanoid robot football, Federation of International Robot-soccer Association (FIRA) competition).

Course details

In your first year you'll learn through doing, developing your knowledge and practical problem solving skills in our dedicated robotics and communications laboratories. From analogue and digital electronics to engineering mathematics, you'll build up the essential foundations of robotics. Group project work will also help you develop your communication skills and you'll learn structured design procedures for hardware and software all brought together in an integrating robotics project.

Throughout your second year, you'll develop a greater understanding of underlying engineering principles and circuit design methods. Again there's an emphasis on team-work, with the opportunity to do both group and individual presentations of your projects. You'll use industrial standard software tools for design and simulation, data monitoring and control, all valuable preparation for your final year individual project or for a placement year.

Your optional work placement experience gives opportunities to put theory into practice, grow your understanding of robotics in the real world and showcase your growing expertise. We can help you find industrial placement opportunities in the UK, France, Germany or even Japan. Placements will complement your studies with on-the-ground experience and could lead to final year sponsorship. Many of our graduates are offered permanent jobs with their placement company.

Year 4 is when your skills, expertise and know how come into their own. Through your individual project you'll consolidate your knowledge, explore and evaluate new technologies and showcase your potential. You'll demonstrate your communication skills in an oral and written presentation of your project. Refining the independent learning skills you've developed throughout the course, you'll build a proactive, imaginative and dynamic approach to learning, vital for your future robotics career.

In your final year the MEng includes additional technical modules and a large interdisciplinary design project. There is also the possibility of continuing your studies to MSc level in the same academic year.

How to apply

All applications for undergraduate courses are made through UCAS (Universities and Colleges Admissions Service).

UCAS will ask for the information contained in the box at the top of this course page including the UCAS course code and the institution code.

To apply for this course and for more information about submitting an application including application deadline dates, please visit the UCAS website.

Support is also available to overseas students applying to the University from our International Office via our how to apply webpage or email .

Read less
Open the door to a successful future. Our graduates have gone on to work for Ferrari, Honda, British Cycling, Rolls-Royce, Williams Grand Prix Engineering, Activa, Babcock Marine, Princess Yachts and more. Read more

Key features

Open the door to a successful future. Our graduates have gone on to work for Ferrari, Honda, British Cycling, Rolls-Royce, Williams Grand Prix Engineering, Activa, Babcock Marine, Princess Yachts and more.

Primed for your career: 93 per cent of our students are in a professional or managerial job six months after graduation. (Source: unistats)
Benefit from an optional 48 week paid work placement.

Distinguish yourself professionally with a degree accredited by the Institution of Mechanical Engineers (IMechE) and the Institute of Materials, Minerals and Mining (IoM3) for Chartered Engineer status. You can apply to either of these institutions for membership as a Chartered Engineer.

Develop a strong foundation in mechanical engineering principles and materials science.

Choose from specialist modules in composites engineering, design and manufacture.

Experience modern laboratory facilities for practical work which is a core part of the degree.

Benefit from working on industrially relevant problems within composite materials and design of composite structures.

Course details

In Year 1, you’ll acquire a sound foundation in design, mechanics, materials, electrical principles, thermo-fluids, mathematics and business, learning by active involvement in real engineering problems. You‘ll undertake a popular hands-on module in manufacturing methods. Modules are shared with the MEng and BEng (Hons) in Mechanical Engineering and the MEng and BEng (Hons) Marine Technology.

In Year 2, you’ll build your knowledge of composite materials in preparation for specialist modules in the final year. The central role of design integrates with other modules like structures and materials. You'll also study modules on thermodynamics, fluid mechanics, business dynamics, mathematics and control and quality management.

In Year 3, you're strongly encouraged to do a year’s work placement to gain valuable paid professional experience. We will support you to find a placement that is right for you. Our students have worked for a variety of companies from BMW Mini, Bentley, Babcock Marine to NASA. A successful placement could lead to sponsorship in your final year, an industrially relevant final year project, and opportunities for future employment.

In Year 4, you’ll specialise in composites design, engineering and manufacture. You’ll undertake an group design project. Additional modules of study include statistics and quality management. You'll also develop your knowledge and skills through an in-depth project on a topic of your choice.

In your final year, you'll extend your existing skills in engineering design, analysis and control theory. Broaden your knowledge by studying subjects such as entrepreneurship, advanced information technology, robotics and marine renewable energy. You’ll also work in a design team with students from other engineering disciplines working on projects such as design, materials and environmental issues related to bioenergy production, gas/nuclear power stations, energy from the sea and eco villages.

Read less
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Read more
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Faculty expertise encompasses a wide cross-section of specialties and backgrounds; many faculty members have broad industrial experience and complement their teaching and research programs with consultancy services.

The graduate programs offered by the Faculty of Engineering and Applied Science have grown tremendously in the past few years, both in terms of student strength and variety of courses and programs. Our faculty members are increasingly engaged in major research programs supported by NSERC, AIF, CRC and CFI, providing students unique opportunities to work alongside investigators of prestigious projects. Research funding is distributed across the disciplines and graduate students have access to all research facilities and resources. The faculty encourages students to combine two or more traditional disciplines to develop unique and challenging individual programs.

The MEng program involves courses and a thesis, and can be completed in two years of full-time study.

Read less
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Read more
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Faculty expertise encompasses a wide cross-section of specialties and backgrounds; many faculty members have broad industrial experience and complement their teaching and research programs with consultancy services.

The graduate programs offered by the Faculty of Engineering and Applied Science have grown tremendously in the past few years, both in terms of student strength and variety of courses and programs. Our faculty members are increasingly engaged in major research programs supported by NSERC, AIF, CRC and CFI, providing students unique opportunities to work alongside investigators of prestigious projects. Research funding is distributed across the disciplines and graduate students have access to all research facilities and resources. The faculty encourages students to combine two or more traditional disciplines to develop unique and challenging individual programs.

The MEng program involves courses and a thesis, and can be completed in two years of full-time study.

Read less
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Read more
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Faculty expertise encompasses a wide cross-section of specialties and backgrounds; many faculty members have broad industrial experience and complement their teaching and research programs with consultancy services.

The graduate programs offered by the Faculty of Engineering and Applied Science have grown tremendously in the past few years, both in terms of student strength and variety of courses and programs. Our faculty members are increasingly engaged in major research programs supported by NSERC, AIF, CRC and CFI, providing students unique opportunities to work alongside investigators of prestigious projects. Research funding is distributed across the disciplines and graduate students have access to all research facilities and resources. The faculty encourages students to combine two or more traditional disciplines to develop unique and challenging individual programs.

The MEng program involves courses and a thesis, and can be completed in two years of full-time study.

Read less
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Read more
The Faculty of Engineering and Applied Science offers the graduate diploma and MASc, MEng, and PhD degrees in the various engineering disciplines, including Civil, Computer, Electrical, Mechanical, Ocean and Naval, Oil and Gas, Process, and Safety and Risk engineering. Faculty expertise encompasses a wide cross-section of specialties and backgrounds; many faculty members have broad industrial experience and complement their teaching and research programs with consultancy services.

The graduate programs offered by the Faculty of Engineering and Applied Science have grown tremendously in the past few years, both in terms of student strength and variety of courses and programs. Our faculty members are increasingly engaged in major research programs supported by NSERC, AIF, CRC and CFI, providing students unique opportunities to work alongside investigators of prestigious projects. Research funding is distributed across the disciplines and graduate students have access to all research facilities and resources. The faculty encourages students to combine two or more traditional disciplines to develop unique and challenging individual programs.

The MEng program involves courses and a thesis, and can be completed in two years of full-time study.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X