• Jacobs University Bremen gGmbH Featured Masters Courses
  • Anglia Ruskin University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Ross University School of Veterinary Medicine Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Goldsmiths, University of London Featured Masters Courses
  • University of Southampton Featured Masters Courses
University of Manchester Featured Masters Courses
Imperial College London Featured Masters Courses
University of Reading Featured Masters Courses
Barcelona Technology school Featured Masters Courses
University of Cambridge Featured Masters Courses
"measurement"×
0 miles

Masters Degrees (Measurement)

We have 435 Masters Degrees (Measurement)

  • "measurement" ×
  • clear all
Showing 1 to 15 of 435
Order by 
The MERM Program is dedicated to advancing the science and practice of measurement, program evaluation, and research methodology in the social and behavioral sciences (e.g., Psychology, Education, Quality of Life Studies, Health Studies). Read more
The MERM Program is dedicated to advancing the science and practice of measurement, program evaluation, and research methodology in the social and behavioral sciences (e.g., Psychology, Education, Quality of Life Studies, Health Studies). For more than 25 years, the faculty and students of the MERM program have been contributing to its international reputation as a leader in the field. Our students and faculty have done research in human and health services, psychological, educational, community and health settings. The essential difference between the MA and MED in MERM is that the MED is wholly course based whereas the MA requires two fewer courses but the completion of a master's thesis. As such completion of a master's thesis is viewed as a prerequisite for the pursuit of doctoral studies in most institutions.

Quick Facts

- Degree: Master of Arts (research-based), Master of Education (course-based)
- Specialization: Measurement, Evaluation and Research Methodology
- Subject: Education
- Mode of delivery: On campus
- Faculty: Faculty of Education

Program Overview

The graduate program in Measurement, Evaluation, and Research Methodology (MERM) offers Ph.D., M.A., and M.Ed. degrees. The MERM area focuses on the preparation of graduate students to be methodological and measurement specialists. We strive to promote in our research, student supervision, and teaching the highest standards of measurement and research methodology in our discipline. Upon degree completion, our master's and Ph.D. students are employed as university faculty, data analysts, research scientists, test developers, directors of research in school districts or government, research consultants, assessment and testing specialists in business, industry, and education, certification and credentialing professionals, and psychometricians at research and testing organizations.

MERM students generally fit into one of three categories:
1. Students who have an applied interest in educational and psychological measurement, program evaluation, or data analysis. Although they may have some preparation in measurement and data analysis in their undergraduate studies, this is not always the case. These students are more oriented toward the use of measurement, program evaluation, or data analysis techniques in fields such as education, psychology, or health.

2. Students who have strong theoretical interests in technical problems related to areas such as test theory, item response theory, assessment, statistics, factor analysis, and multi-level modeling. Although some of these students come to the Program with some statistical and/or mathematical background, often obtained while studying in another social science discipline such as psychology or sociology, other students arrive with degrees in statistics or mathematics as well.
3. Students who find it compatible with their career goals to give equal attention to both applied and theoretical aspects of this program.

Read less
The Certificate of Competence in Environmental Noise Measurement (CCENM) is designed for professionals working in acoustics, including environmental health officers, sound engineers and event managers who are looking to further their specialist knowledge and skills. Read more
The Certificate of Competence in Environmental Noise Measurement (CCENM) is designed for professionals working in acoustics, including environmental health officers, sound engineers and event managers who are looking to further their specialist knowledge and skills.

This five-day course seeks to provide delegates with a basic knowledge of the methodology of environmental noise measurement, including the use and accuracy requirements of sound level meters and analysers and to enable them be aware of the significance of measurement data against the framework of standards and legislation for environmental noise.

The aims of the course are to:

• Provide candidates with a basic knowledge of the methodology of environmental noise measurement, including, in particular, the use and of sound level meters and analysers.
• Provide candidates with an appreciation of the role of measurement data within the framework of standards and legislation for environmental noise.

After successfully completing the course, candidates should be able to:

• Make reliable measurements of background noise and noise from a variety of sources, according to the requirements of the relevant British Standard or guidance document.
• Present and interpret measurement data in a form suitable for inclusion in a report.
• Identify in outline the principle methods of noise control to mitigate the impact of noise on the community.
• Explain measurement methodology and the data acquired, appreciate the measurement content of reports and environmental appraisals and comment on proposals for noise impact mitigation.

This course is accredited by the Institute of Acoustics. Find out more:

http://www.lsbu.ac.uk/courses/course-finder/acoustics-certificate#course_tab_overview

LSBU has been offering courses in Acoustics for over 35 years, and houses the only centre for study with this level of facilities in the South-East of England, including full-size reverberant and anechoic chambers and an exceptionally well equipped and staffed laboratory, with access to the very latest instrumentation and technology.

The teaching team is mostly comprised by senior lecturers of the IOA courses and university postgraduate degrees in Acoustics, and you'll have access to our extensive on-site and electronic library and Learning Resource Centre to support your learning.

Modules

The course will cover:

Basic concepts and noise units
Instrumentation for environmental noise measurement
Noise indices and measurement methodology for environmental noise measurement
Environmental noise measurement in practice
Basic aspects of noise propagation
Exam assessment

Professional links

The certificate satisfies the educational requirements for Technician membership of the Institute of Acoustics (TechIOA).

Membership of this professional body can provide you with contacts and networking opportunities, and it's a good platform on which to build your career.

Employability

Students on this course will normally be in employment, but the course offers an opportunity to gain specialist knowledge that could help you stand out from your peers and provide you with skills that you can start using straight away in your day-to-day work.

Measurement of environmental noise is an increasingly important job for planning and regulating noise in a variety of areas, particularly in London, thanks to the wide range and speed of new infrastructure development.

LSBU offers both the IOA Diploma in Acoustics and Noise Control and MSc Environmental and Architectural Acoustics for those students wishing to pursue further study.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

• Direct engagement from employers who come in to interview and talk to students
• Job Shop and on-campus recruitment agencies to help your job search
• Mentoring and work shadowing schemes.

Read less
Further your knowledge, right now!. As one of the largest economic sectors in Australia, the construction industry seeks graduates with distinctive skills, knowledge and practical experience across a variety of fields. Read more

Further your knowledge, right now!

As one of the largest economic sectors in Australia, the construction industry seeks graduates with distinctive skills, knowledge and practical experience across a variety of fields. By studying a Master of Construction Practice at Bond, Australia, graduates are equipped with the necessary knowledge in management and skills to deliver complex construction projects. Graduates will gain a professionally recognised qualification and in turn, enhance their career potential in the field of construction practice.

Gain professional recognition

The Master of Construction Practice is professionally recognised by some of Australia’s leading professional bodies. This allows graduates to differentiate themselves within the industry. Graduates are internationally recognised by the Royal Institution of Chartered Surveyors (RICS) as well as the Chartered Institute of Building (CIOB). They are also nationally accredited with the Australian Institute of Quantity Surveyors (AIQS), and meets the educational requirement set by the Queensland Building and Construction Commission (QBCC) for the granting of an Open Builders Licence.

Further, the program is also delivered in intensive mode. Intensive Mode Delivery is a compact and time efficient way to complete a postgraduate qualification with minimal impact on professional and personal lifestyles. Each subject is delivered over two weekends during the semester. There are two sets of three-day sessions per subject, generally scheduled Thursday to Saturday (approximately six to eight contact hours per day) with a break of four or five weeks between session one and session two of each subject.

Participants will receive 40 hours of combined lectures, discussion groups, case studies and workshops during contact hours. International students are required to be on campus every week.

About the program

The Master of Construction Practice covers a comprehensive range of subjects in the field of construction practice, focusing on the management and delivery of complex construction projects. The curriculum addresses a range of topics including building plans and processes, building structures and soil mechanics, construction techniques, contract administration, finance and cost planning, project management, refurbishment and retrofitting, and risks. It also contains a strong sustainability theme which equips graduates with distinctive skills that are highly sought after in the built environment. 

Industry overview

Construction is a fast paced and evolving industry, with sustainability a prominent concern for both the private and government sectors. Roles within the construction industry can be applied to practitioners such as estimators or contract managers, or as professionals such as quantity surveyors or project managers. Graduates equipped with the skills to apply innovative and adaptable solutions within complex environments are highly sought after.

Structure and subjects

View the Master of Construction Practice - Program Structure and Sequencing

The structure of the Master of Construction Practice is based on both theoretical and practical subjects. This program is designed in close consultation with prominent industry professional boards to ensure the integrity and contemporary relevance of the degree.

This program enables you to exit after four subjects with a graduate certificate, after eight subjects with a graduate diploma or complete 12 subjects for a master’s degree.

Graduate Certificate in Construction Practice (4)

The Graduate Certificate in Construction Practice program comprises 4 subjects, as follows:

Required Subjects (1)

Optional Subjects (2 + 1)

Choose 2 from the below subjects:

Plus choose 1 from the following:

Graduate Diploma in Construction Practice (8)

You must complete the following two subjects:

And select six subjects from the following options:

Master of Construction Practice (12)

To complete a Master of Construction Practice, you must complete all of the subjects below:

And select two subjects from the following options:



Read less
Gain technical membership to the Institute of Acoustics upon successful competition of this course. Develop the skills to undertake environmental noise measurements in the field and assess and report upon them confidently. Read more

Why choose this course:

• Gain technical membership to the Institute of Acoustics upon successful competition of this course
• Develop the skills to undertake environmental noise measurements in the field and assess and report upon them confidently
• Study at one of the leading centres in delivering short courses in noise, with over 20 years’ experience

About this course

Accredited course
This course is accredited by the Institute of Acoustics. With over 20 years’ experience of delivering short courses in acoustics, we’re confident that you will find the standard of teaching excellent.

If you’re employed in a technical or scientific role by local authorities, environmental consultancies or other organisations where environmental noise measurement features, this course is ideal for you.

Skilled practitioner
The course is just five days in length, so you’ll be brought up-to-date quickly with current measurement practices for environmental noise assessment. You’ll take a practical and a written exam to evidence your learning and development.

This is a hands-on course that will develop your skills in both undertaking noise measurements and the successful interpretation of results. It’s therefore designed to be practical and highly relevant to the job you do.

As we know that many of you will be working and will be taking this course as part of your professional development, we may be able to hold the course at your place of work to make it more convenient.

Career building
This course offers a great opportunity to boost your knowledge quickly, and gain a recognised qualification that will look great on your CV.


The course will start on a Monday and will take five days to complete. You'll take a practical exam on the Friday. There's also a written exam that is normally held on a Friday about two weeks after the course.

We usually run the course twice a year in April and September at our Kedleston Road site in Derby. However, it may be possible, by special arrangement, to hold the course at your place of work.

Read less
Designed in consultation with industry, the MSc Applied Instrumentation and Control gives you a structured approach to the implementation of recent developments whilst embedding the knowledge we have acquired through many years of experience. Read more
Designed in consultation with industry, the MSc Applied Instrumentation and Control gives you a structured approach to the implementation of recent developments whilst embedding the knowledge we have acquired through many years of experience.

Using case studies throughout, you build up knowledge that is instantly applicable to industry, ensuring an efficient and relevant knowledge transfer into the work place.

Accredited by the Institute of Measurement and Control.

This course has several available start dates and modes of study - please view the relevant web-page for more information:
JANUARY 2017 (Distance Learning) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00725-1DLAB-1617/Applied_Instrumentation_&_Control_(January)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

JANUARY 2018 (Full Time) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00927-1FTAB-1718/Applied_Instrumentation_and_Control?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

SEPTEMBER 2017 (Distance Learning) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00725-1DLA-1718/Applied_Instrumentation_and_Control_(Distance_Learning)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

JANUARY 2018 (Distance Learning) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00725-1DLAB-1718/Applied_Instrumentation_and_Control_(Distance_Learning)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

Programme Description

Accredited by the Institute of Measurement and Control, the MSc Applied Instrumentation and Control provides a solid foundation in measurement science and control theory, practical experience of data acquisition and instrument networking, analysis of systems for condition monitoring, fault detection and control system design.

Designed in consultation with industry, the programme provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience.

Using case studies throughout, the programme provides you with knowledge that is instantly applicable to industry, thus ensuring efficient and relevant knowledge transfer. The programme will include a project which may be industrially based.

Accreditation

The programme is accredited by the Institute of Measurement and Control (InstMC) as meeting the Engineering Council’s further learning requirements for registration as a Chartered Engineer.

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of process variables and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems.

The range of sectors includes: petrochemicals, agrochemicals, pharmaceuticals, optics and optoelectronics, medical instrumentation, power generation and the food, environmental and water industries. The employment areas within these sectors include: computer controlled instrumentation systems; process instrumentation; technical management and sales; process control and automation; sensor development and manufacture; instrument networking; instrument development; and test and measurement systems.

Read less
Fascinated by the science of sound? Southampton Solent University’s applied acoustics masters programme can provide you with the skills and knowledge required to work in a range of acoustics fields. Read more

Overview

Fascinated by the science of sound? Southampton Solent University’s applied acoustics masters programme can provide you with the skills and knowledge required to work in a range of acoustics fields. Suitable graduate destinations include consultancy, engineering, environmental health, built environment work or further study at PhD level.

Taught by experts with experience in both research and industry, you can get hands-on experience and learn to use the latest measurement, simulation and modelling technology. You will also study important acoustics principles including how humans respond to sound, acoustic physics, and how sound interacts with our environment.

- Students learn from industry experts with strong backgrounds in industry, research and consultancy roles.
- Southampton Solent’s on-campus acoustics consultancy provides students with the opportunity to work with real clients.
- The curriculum is informed by industry partners and Solent’s strong track record of acoustics research.
- Solent has a 10-year history of successful graduate employment in the acoustic industries.
- Students are given the opportunity to tailor the programme to their own career ambitions by picking from a range of optional units.
- Students have free access to the latest industry-standard technology including a state-of-the-art 3D digital Cinema with Dolby Atmos; a Hemi-anechoic chamber; CadnaA, EASE and CATT software; and a wide variety of lab and field test equipment.

The industry -

Acoustics offers an intellectual and practical challenge across a wide range of sectors - from manufacturing or construction to architecture, telecommunications and engineering.

Acousticians could be involved in designing and planning exciting new infrastructure projects such as airports, motorways and sports arenas; could be responsible for making aeroplanes and cars quieter; or could work on improving the sound quality of consumer electronics. Acousticians are also involved in the design of new buildings – from flats and houses through to skyscrapers and concert halls.

The programme -

Taught by experts with strong research and industry backgrounds, MSc Applied Acoustics offers students the chance to gain hands-on experience with the latest measurement, simulation and modelling technology. Students also study relevant scientific principles such as how humans respond to sound, acoustic physics, and how sound interacts with our environment.

We have excellent links with the Institute of Acoustics (IoA) and the Association of Noise Consultants, as well as a number of commercial companies across the sector. These include KP Acoustics, with whom we have a formal partnership for work placement and mentoring. The course has also been designed to meet the requirements for professional IoA registration.

To aid study and help perfect techniques, students have full access to the University’s laboratory and studio facilities. Students will be able to undertake acoustic measurement and laboratory projects using a wide range of test equipment such as sound level meters, a 16-channel data acquisition system, head and torso simulators, a laser vibrometer and ambisonic microphones. Students will also have access to cutting-edge simulation and modelling software, including MATLAB, NI Labview, CadnaA, CATT Acoustic, and EASE.

The University also offers access to specialist facilities for the testing and demonstration of acoustic and electro-acoustic principles, including a hemi-anechoic chamber, audio isolation booths for sound recording and audiometric testing, and the University’s own digital 3D cinema.

Thanks to the course team’s strong industry connections, students have access to guest speakers from a range of relevant organisations. Previous speakers have included Mark Murphy and Jim Griffiths (Vanguardia Consulting), Nicholas Jones (Hilson Moran) and Phil McIlwain (Westminster City Council).

Course Content

Programme specification document - http://mycourse.solent.ac.uk/course/view.php?id=6152

Teaching, learning and assessment -
The course is taught through classroom seminars/lectures, laboratory sessions and independent learning, as well as your supervised research project. While some laboratory sessions entail working in a group, all assessment is individual.

Partial credit can be awarded to holders of the Institute of Acoustics diploma in acoustics and noise control against equivalent taught modules of the MSc. Please contact the course team for further information.

Work experience -

There are a number of opportunities for work experience with professional partners and contacts, as well as through the University’s own Solent Acoustics consultancy.

Past students have worked on a range of projects, including for Truck Festival, Isle of Wight Festival, Westminster City Council and KP Acoustics.

Additionally, the Professional Skills and Practice unit involves organising your own work placement with an external company, supported by staff and making use of the course team’s industry contacts.

Assessment -

The course is assessed through a mixture of coursework, projects, presentations and practical and written examinations.

Our facilities -

On the master’s course you will have access to a wide range of specialist equipment and facilities, including:

- Hemi-anechoic chamber with 16-channel National Instruments data acquisition system.
- NTi Flexus electroacoustic analysis system with turntable.
- Wide range of Class 1 and 2 Sound level meters.
- Cirrus Research Dosebadge workplace noise assessment kits.
- Building acoustics systems including conical and dodecahedral loudspeakers and tapping machine.
- B&K Head and Torso Simulators (HATS).
- Environmental noise measurement kits.
- Polytec Laser Vibrometer.
- Larson Davis Hand Arm vibration measurement system.
- Siemens Unity and Amplivox audiometers and Larson Davis Audiometer calibration system.
- Computer suites with EASE, CATT and CadnaA acoustic modelling software.

Web-based learning -

Solent’s virtual learning environment provides quick online access to assignments, lecture notes, suggested reading, discussion forums and other course information.

You will also receive a subscription to the online video tutorial resource Lynda.com, to help learn extra professional skills.

The Professional Skills and Practice optional module is a distance/online module, supported through the virtual learning environment.

Why Solent?

What do we offer?

From a vibrant city centre campus to our first class facilities, this is where you can find out why you should choose Solent.

Facilities - http://www.solent.ac.uk/about/facilities/facilities.aspx

City living - http://www.solent.ac.uk/studying/southampton/living-in-southampton.aspx

Accommodation - http://www.solent.ac.uk/studying/accommodation/accommodation.aspx

Career Potential

Acoustics offers an intellectual and practical challenge across a wide range of sectors, from manufacturing or construction to architecture, telecommunications or various engineering industries.

Acousticians could be involved in designing and planning exciting new infrastructure projects such as airports, motorways and sports arenas, or could be responsible for making airplanes and cars quieter, or improving the sound quality of a television or computer.

Acousticians are also involved in the design of new buildings – from flats and houses through to skyscrapers and concert halls.

Career destinations -

Examples of career destinations include:

- acoustic engineer
- audio system designer
- recording studio and concert hall designer
- environmental health officer
- environmental consultant
- audio engineer
- health and safety officer
- building control officer.

Links with industry -

We have excellent links with the Institute of Acoustics and the Association of Noise Consultants, as well as a number of companies across the sector, including KP Acoustics (with whom we have a formal partnership for work placement and mentoring).

Guest speakers from a range of different organisations regularly present seminars and workshops, which have recently included Mark Murphy and Jim Griffiths (Vangardia Consulting), Nicholas Jones (Hilson Moran) and Phil McIlwain (Westminster City Council).

The University also hosts regular industry events and conferences to which students are invited.

Transferable skills -

The MSc in Applied Acoustics offers students a wide variety of transferable skills, such as using software to analyse and present complex data, use of Geographical Information Systems (GIS) and architectural CAD modelling, problem solving, mathematics, project management and research skills.

Further study -

If you are particularly interested in research, the course offers opportunities to continue on to PhD study.

You will also have the chance to gain additional qualifications while you study, such as the Institute of Acoustics (IoA)’s certificates of competence in building acoustics measurement or environmental noise measurement, at significantly reduced cost.

There is also the opportunity to register to take the assessment for the IoA Diploma in Acoustics and Noise Control while taking the MSc (registration fee applies).

Examples of employment obtained by recent graduates -

Solent graduates have gone on to work in acoustics roles for Apple (acoustic engineer), Accon UK, Samsung (audio engineer), Cole Jarman Associates, Hilson Moran, Mott Macdonald, KP Acoustics, Hann Tucker Associates, Hoare Lea, Vangardia Consulting and Clarke Saunders Associates, among others.

Next steps

Looking to hone your knowledge of acoustics while boosting your employability? With top-of-the-line facilities, an experienced teaching team and a history of delivering world-class acoustics tuition, Southampton Solent University’s MSc Applied Acoustics will help equip you with the skills you need to thrive in a range of exciting careers.

Read less
Designed in consultation with industry, MSc Applied Instrumentation and Control provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience. Read more
Designed in consultation with industry, MSc Applied Instrumentation and Control provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience. Using case studies throughout, the programme provides you with knowledge that is instantly applicable to industry, thus ensuring efficient and relevant knowledge transfer.

Accredited by the Institute of Measurement and Control.

Programme Description

Accredited by the Institute of Measurement and Control, the MSc Applied Instrumentation and Control provides a solid foundation in measurement science and control theory, practical experience of data acquisition and instrument networking, analysis of systems for condition monitoring, fault detection and control system design.

Designed in consultation with industry, the programme provides a structured approach to the implementation of recent developments whilst maintaining a secure underpinning identified through many years of experience.

Using case studies throughout, the programme provides you with knowledge that is instantly applicable to industry, thus ensuring efficient and relevant knowledge transfer. The programme will include a project which may be industrially based.

Accreditation

The programme is accredited by the Institute of Measurement and Control (InstMC) as meeting the Engineering Council’s further learning requirements for registration as a Chartered Engineer.

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of process variables and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems.

The range of sectors includes: petrochemicals, agrochemicals, pharmaceuticals, optics and optoelectronics, medical instrumentation, power generation and the food, environmental and water industries. The employment areas within these sectors include: computer controlled instrumentation systems; process instrumentation; technical management and sales; process control and automation; sensor development and manufacture; instrument networking; instrument development; and test and measurement systems.

Read less
2-year master's programme provides thorough knowledge and skills in the areas of laboratory and technological measurements, testing and chemical analysis methods, quality systems, metrology and related economic and legal aspects. Read more

2-year master's programme provides thorough knowledge and skills in the areas of laboratory and technological measurements, testing and chemical analysis methods, quality systems, metrology and related economic and legal aspects. Studies are carried out in the “Physicum” and “Chemicum” buildings in Tartu – among the top research and education facilities in Northern Europe.



Read less
Advance your career. Construction was the first and is still the dominant sector of the economy where project management is practised. Read more

Advance your career

Construction was the first and is still the dominant sector of the economy where project management is practised. It is also an international endeavour, where the cost and complexity of major buildings is ever increasing.

Further your expertise and industry experience for a global career through the combined the Master of Construction Practice/Master of Project Management. Graduates will gain an internationally recognised qualification and in turn, enhance their career potential in the field of construction practice.

Internationally recognised qualification

The Master of Construction Practice/ Master of Project Management is professionally recognised by some of Australia’s leading professional bodies. This allows graduates to differentiate themselves within the industry and further their career potential.

About the program

The combined Masters degree in Construction Practice and Project Management enables students interested in being a construction project manager to gain specialised knowledge related to the delivery of complex buildings. Construction was the first and is still the dominant sector of the economy where project management is practised. It is also an international endeavour, where the cost and complexity of major buildings is ever increasing. Therefore, a combined understanding of the construction process together with the generic principles of successful management of scope, time, cost, risk, human resources, quality, procurement, stakeholders and environmental impact, and their balanced integration, is most valuable. Construction project managers demand salaries at the top of the professional range, and may be involved in commercial, residential, industrial and civil developments, including in the energy and resources sector. Students graduate with a Master of Construction Practice and a Master of Project Management upon completion.This degree is internationally recognised by the Project Management Institute (PMI).

Structure and subjects

View the Master of Construction Practice / Master of Project Management - Program Structure and Sequencing

You must complete all of the following subjects:



Read less
Further your knowledge, right now!. As one of the largest economic sectors, the construction industry seeks graduates with distinctive skills, knowledge and practical experience across a variety of fields. Read more

Further your knowledge, right now!

As one of the largest economic sectors, the construction industry seeks graduates with distinctive skills, knowledge and practical experience across a variety of fields. The Master of Construction Practice (Professional) at Bond equips graduates with the necessary knowledge in management and skills to deliver complex construction projects. Graduates will gain a professionally recognised qualification and in turn, enhance their career potential in the field of construction practice.

Intensive mode delivery

The Master of Construction Practice (Professional) is professionally recognised by some of Australia’s leading professional bodies. This allows graduates to differentiate themselves within the industry.

Further, the program is also delivered in intensive mode. Intensive Mode Delivery is a compact and time efficient way to complete a postgraduate qualification with minimal impact on professional and personal lifestyles. Each subject is delivered over two weekends during the semester. There are two sets of three-day sessions per subject, scheduled generally Thursday to Saturday (approximately six to eight contact hours per day) with a break of four or five weeks between session one and session two of each subject.

Participants will receive 40 hours of combined lectures, discussion groups, case studies and workshops during contact hours. International students are required to be on campus every week.

About the program

The Master of Construction Practice (Professional) covers a comprehensive range of subjects in the field of construction practice, focusing on the management and delivery of complex construction projects. The curriculum addresses a range of topics including building plans and processes, building structures and soil mechanics, construction techniques, contract administration, finance and cost planning, project management, refurbishment and retrofitting, and risks. It also contains a strong sustainability theme which equips graduates with distinctive skills that are highly sought after in the built environment. Professional Portfolio is a 20 week, 45 credit point subject available to Master of Construction Practice (Professional) students in the Faculty of Society & Design. This subject is strongly experientially oriented and encourages students to develop their professional skills in a real world environment. The subject will ensure that students combine self-analysis and reflective learning skills with professional methodologies, so as to expand analytic and strategic thinking capabilities. It will provide practical experience for students to develop their skills in a profession relevant to their Master specialisation. All students will complete a 2,000-word scoping document, and either undertake a work placement in Australia for 210 hours (which includes an employer’s report) and reflective journal (up to 5,000 words) OR complete a collaborative research project totalling up to 15,000 words OR students may choose to undertake a Workshop program. The workshop incorporates, lab work, site visits, guest industry lectures and practical assessment pieces equating to the same number of hours as a placement. The workshop offers students a mix of classroom learning and practical experiences. Students will meet and work with industry professionals and undertake assessment that is practical in nature. All students will submit a final professional portfolio collection of documents, highlighting their practical and theoretical expertise in their profession of choice.

Structure and subjects

View the Master of Construction Practice (Professional) - Program Structure and Sequencing.

The structure of the Master of Construction Practice (Professional) is based on both theoretical and practical subjects. This program is designed in close consultation with prominent industry professional boards to ensure the integrity and contemporary relevance of the degree.

Master of Construction Practice (Professional) comprises 13 subjects, as follows: 

* Please note that the Professional Portfolio subject can only be commenced once all coursework subjects have been completed.

And select two (2) subjects from the following options:



Read less
To be admitted to the Second Cycle Degree (MSc) Programme in Economics and Finance students must possess an appropriate academic preparation and meet specific… Read more
To be admitted to the Second Cycle Degree (MSc) Programme in Economics and Finance students must possess an appropriate academic preparation and meet specific curricular requirements, represented by a First Cycle Degree (or other qualification awarded abroad and determining eligibility) and 60 university credits (CFUs) related to specific Educational Sector Codes (in Italian Settori Scientifico Disciplinari, abbreviated as “SSD”) in the following disciplines: management, economics, mathematics, statistics, law.

Unlimited entry, with assessment of minimum curricular requirements.

Quotas (i.e. reserved places) for non-EU students residing abroad: 66 places, 50 of which reserved for Chinese students residing in China as part of the Marco Polo Programme.

Course description

Ca’ Foscari University is now offering a curriculum completely taught in English (LM-77 - Scienze economico-aziendali - Management) in the MSc (Master of Science/Laurea Magistrale) degree in "Economia e Finanza – Economics and Finance".

This Master's Degree Programme specialising in finance involves two years of full-time study. It aims to prepare experts with proficiency in dealing with the main issues related to financial markets, brokerage management, financial investment management and financial risk measurement and management, financial consultancy and insurance, supplementary allowance and retirement funds management, internal organisation processes and administrative management of banks and financial institutions in general.

The Master's Degree Programme also offers the opportunity of participating in adouble degree programme in cooperation with the University Aix Marseille (France) and of obtaining a Double Master’s Degree in Economics, Econometrics and Finance (MEEF), for which scholarships are available. The programme draws upon a balanced blend of economic and mathematical methods to form specialists capable of contributing to the sustainable development of society and of providing prompt responses to economic crises. The Double Master’s Degree Programme has obtained official MOY (Mediterranean Office for Youth) recognition.

The two universities aim to provide a thorough preparation for students wishing to work in financial institutions where they will be required to solve quantitative problems in economic and financial fields.

Curricula available

1. Curriculum Economia e Finanza (taught in Italian)
Contact Professor: Prof. Monica Billio (e-mail: )
This curriculum trains second cycle graduates, equipping them for the main areas of financial intermediary management and to thoroughly and skillfully tackle specific issues such as the measurement and management of financial risks.

2. Curriculum Economics and Finance (taught completely in English)
Contact Professor: Prof. Antonella Basso (e-mail: )
This curriculum uses a blend of theoretical and practice-oriented training to provide international students with the knowledge and skills required by financial institutions and markets. The programme covers a wide range of contents, with particular emphasis on: risk measurement, financial markets, financial investment management, financial consultancy and insurance.

Learning outcomes

This Master Degree Programme aims to train experts with proficiency in dealing with the main financial issues related to financial markets, brokerage management, financial investment management and financial risk measurement and management, financial consultancy and insurance, supplementary allowance and retirement funds management, internal organisation processes and administrative management of banks and financial institutions in general.

Employment profiles

Second cycle graduates will acquire the necessary knowledge to access financial institutions (trade banks, savings management companies, insurance companies) and to operate professionally as risk managers and controllers, analysts and consultants in financial fields, as well as insurance and reinsurance brokers.

Attendance: Open attendance

Examination assessment and graduation

The educational activities include lectures, workshops and internships (also abroad) to allow students to acquire wide-ranging skills that are readily transferable into the world of work. The skills and knowledge acquired by students will be assessed throughout the programme by means of written and oral examinations.

The final master's thesis

The programme is completed with a final master's thesis requiring students to work intensively on a topic of their choice with the support of regular meetings with their supervisor. Students will defend their master's thesis, which must be original and backed by exhaustive documentation and scientific investigation, before a committee of professors and experts.

Admission to further studies: Specialist Master’s Programmes (1st and 2nd level) and Research Doctorates

Applying to the programme

To enter the programme applicants need to have the equivalent to an Italian three-year undergraduate degree (Laurea) such as a BSc (Bachelor of Science) degree as well as the necessary academic preparation.

When and how to apply

Classes start in September. You are advised to apply as early as possible. Applications are to be made directly to Ca’ Foscari University. For full details go to How to apply, or contact Prof. Antonella Basso ().

Subject area:

This curriculum provides international students with the knowklege and the skills required by financial institutions and markets, through a blend of theoretical and practice-oriented training. The programme covers a wide range of contents, with particular emphasys on: risk measurement, financial markets, financial investments management, financial consultancy and insurance.

Read less
The optoelectronics market is expected to grow significantly in coming years. This specialist optoelectronics Masters course will give you access to optoelectronics expertise, so you can take advantage of new opportunities in this field. Read more
The optoelectronics market is expected to grow significantly in coming years. This specialist optoelectronics Masters course will give you access to optoelectronics expertise, so you can take advantage of new opportunities in this field.

Optoelectronics includes electronic devices that source, detect and control light. On this course you will benefit from high-level vocational training in lasers, LED lighting and semiconductors, tailored to the needs of the optoelectronics and optical communications industries.

As part of your studies, you will also benefit from the latest research within the field. You will be able to attend relevant research seminars and departmental seminars that are held regularly throughout the year. These events reflect the most up-to-date thinking from academics and specialists from industry.

The teaching team, many of whom have published research in optoelectronics, lead the University’s Wireless and Optoelectronics Research and Innovation Centre This informs our teaching, so you will benefit from cutting-edge Course Content that embodies the latest research.

Routes of study:
The course is available to study via two routes:
- MSc Optoelectronics (with internship)
- MSc Optoelectronics (without internship)

Please note: *Internships are optional and available to full-time students only. Internship places are limited. Students have the opportunity to work in a participating UK company or within a Research Centre at the University. You can also opt to study the course without an internship which will reduce your course length.

What you will study

You will study the following modules:
- Physics in Modern Optics
- Optoelectronics Devices for Telecommunications
- Optoelectronics Devices for Life Science & Measurement
- Applied Digital Signal Processing
- Embedded System Design
- Product Innovation and Entrepreneurship
- Six month Internship
- Masters Major Individual Project

Learning and teaching methods

The optoelectronics course offers an intensive but flexible learning pattern, with two start points each year – February and September. There are three major blocks during the 18 months’ study (full-time), which includes 12 months of teaching and a possible six months of internship*. Throughout your studies you will complete a 15-week final research project.

You will be taught through lectures, tutorials and workshops involving hands-on systems modeling and simulations using state-of-the-art hardware and software facilities (Zemax, Lightools etc). Students will also engage in supervised research supported by full access to world-class online and library facilities.

You are also expected to regularly attend relevant research seminars and departmental colloquia, which reflect the up-to-date research interests of the Wireless and Optoelectronics Research and Innovation Centre (WORIC).

The optoelectronics course is available to study via two main routes, you can opt to add further value to your studies by undertaking an internship or simply focus on building your academic knowledge through a on-campus study as detailed below:

- MSc Optoelectronics (with internship):
Delivery: Full-time only | Start dates: September and February

If you choose to undertake an internship, your course will be delivered in four major blocks that offer an intensive but flexible learning pattern. Six taught modules are completed during two teaching blocks featuring 12 contact hours per week. This is followed by 6 month period of internship, after which the student returns to undertake a 16-week major research project. Please note: Course length may vary dependent on your chosen start date.

- MSc Optoelectronics (without internship):
Delivery: Full-time and Part-time | Start dates: September and February

The study pathway available without internship is available full-time and part-time. The full-time route is delivered in three major blocks. Six taught modules are completed during two teaching blocks featuring 12 contact hours per week followed by a 16-week major research project. The full-time course duration is about 12 months, if you study part-time then you will complete the course in three years. Part-time study involves completing three modules in each of the first two years and a major research project in the final year. The use of block-mode delivery in this way allows flexible entry and exit, and also enables practising engineers to attend a single module as a short course.

Work Experience and Employment Prospects

Many industries need specialists in optoelectronics systems design. Careers are available in industrial and technology sectors such as automotives, computers, consumer electronics, communications, industrial optical sensing equipment and medical laser equipment.

The major project gives you a great opportunity to deepen your knowledge and hone your skills in a specialist topic informed by your planned career, and the period of internship gives you an industrial experience that can set you apart from others immediately upon graduation.

Internship

Internships are only available to students studying full-time: Following successful completion of six taught modules, you will be competitively selected to join participating UK companies or University Research Centres on a six-month period of unpaid work placement before returning to undertake your major research project. All students who have an offer for the MSc Optoelectronics (with internship) are guaranteed an internship either in industry or in a University Research Centre.

There are 25 internship places available. Students who wish to undertake an internship must apply for the MSc Optoelectronics (with internship). It is anticipated that there will be significant demand for this programme and applicants are advised to apply as soon as possible to avoid disappointment. Applications will be considered on a first come first served basis and the numbers of students offered a place on the programme with internship will be capped.

If the course is already full and we are unable to offer you a place on the Masters course with internship, we may be able to consider you for the standard MSc Optoelectronics (without internship) which is a shorter programme.

Assessment methods

Each of the six taught modules is typically assessed through 50% coursework and 50% closed-book class test. The major project is assessed through presentation to a panel of examiners, viva and written report. Work for lecture modules is assessed largely through examinations whereas the laboratory work is assessed in a continuous manner. Lecture courses are examined at the end of each teaching block.

Facilities

There are two optoelectronics and two RF laboratories equipped with £1million worth of experimental equipments and modeling facilities. These state-of-the-art facilities are home to:

The Innova® Sabre® MotoFreD™ ion laser
Newfocus TLM-8700 fast sweep tunable laser source
Agilent 8164B Lightwave Measurement System
RENISHAW ML-10 Measurement Systems
Beam profilers: Thorlabs BC106-VIS – CCD Camera Beam Profiler, Thorlabs BP109-IR – Beam Profiler
Scanning Fabry-Perot Spectrum Analyzer. e.g. Thorlabs SA200-5B, Coherence 0464H08
Anritsu MS9710B Optical Spectrum Analyzer
Ocean Optics spectrometers. e.g. HR4000 and USB4000
Edwards E306A Coating System Thermal Vacuum Evaporator
SCS G3-8 Spin Coater
ZEPTO laboratory plasma cleaner ZEPTO
FUJIKURA FSM-40S ARC FUSION SPLICER
National Instruments FPGA and Digitizer
Signal generator: TG210 2MhZ function Generator
Oscilloscopes: HP infinium Oscilloscope, HM507 Combiscope
Anechoic Chamber suitable for frequencies above 1 GHz.
Various measurement systems for 2, 10, 20, 40, & 60 GHz links
VubiQ 60 GHz development kits
Three 60 GHz Backhaul links (Sub10 Systems)
Antenna radiation patterns measurement system
Two equipped vans for outdoor measurements
Programmable or Reconfigurable Platform (DSPs, FPGAs, GPPs)
The modeling facilities include high performance computing facilities (e.g. a 24-core cluster) equipped with various optoelectronic and EM modeling packages such as FDTD solutions, Zemax, FEKO, and VPI Photonics suites. We also in-house novel RF Ray-tracing and Physical Optics EM planning tools developed by members of WORIC.

Teaching

The academic staff teaching on the MSc Optoelectronics are the same people who lead and work in the WORIC. This international centre has a significant track record of innovation in lasers, sensors, nanophotonics, wireless communications, telecommunications, and optical communications and aims to provide industry with access to cutting edge innovative ideas and knowledge. WORIC has won many grants from EPSRC, TSB, EADS, as well as A4B is keen to solve real industrial problems with innovation that provides enormous market.

Read less
The oil and gas industry instrumentation professional must be equipped to understand the principles and implementation of instrumentation, the importance of efficient and reliable measurement and control systems and have a suitably wide perspective of the subject area so that a number of different approaches to a problem can be identified. Read more
The oil and gas industry instrumentation professional must be equipped to understand the principles and implementation of instrumentation, the importance of efficient and reliable measurement and control systems and have a suitably wide perspective of the subject area so that a number of different approaches to a problem can be identified. This programme addresses these requirements.

The MSc Applied Instrumentation and Control (Oil & Gas) is available to study full-time beginning in September and January.

Programme Description

The oil and gas industries are widely affected by a growing range of factors, including shifting global economics, an evolving global energy mix and environmental issues.

There is an increasing demand for those working in the industries to develop an intelligent awareness of this complex business environment and to grasp the ways in which these changes will affect organisations.

Developed in conjunction with industry, the School of Engineering and Built Environment at GCU offers a suite of programmes designed to provide the knowledge required for a range of professional careers within the oil and gas industry.

The oil and gas industry instrumentation professionalmust be equipped to understand the principles andimplementation of instrumentation, the importanceof efficient and reliable measurement and controlsystems and have a suitably wide perspective of thesubject area so that a number of different approachesto a problem can be identified. This programmeaddresses these requirements.

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of processes and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems. The range of industrial sectors includes: petrochemical, agrochemical, the food industry, pharmaceutical, environmental, optics and optoelectronics, medical instrumentation, power generation and the water industry. The employment areas within these sectors include: computer controlled instrumentation systems, process instrumentation, technical management and sales, process control and automation, sensor development and manufacture, instrument working and test and measurement systems.

Assessment

The taught modules are assessed by coursework only or a combination of coursework and examination. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Read less
Course structure. This Master's will help you enhance your skills and knowledge, and advance your career. Read more

Course structure

This Master's will help you enhance your skills and knowledge, and advance your career. You will gain a competitive edge by acquiring an advanced and critical understanding of theoretical frameworks and applied aspects of banking, financial regulation, financial markets, bank management and corporate financial management.

Our courses focus on providing you with practical application of banking and finance knowledge and techniques. This will allow you to develop the ability to research issues, analyse and solve problems and operate effectively in the context of modern banking and finance environments.

Industry ready

Recognising that the banking industry and financial markets are highly globalised and dynamic, this Master's has been developed so that it incorporates a study of different banking systems, international financial markets and emerging global trends and developments in banking in its core content. 

Our innovative courses offer you a chance to explore in depth cutting edge developments in areas such as risk measurement and modelling, business and corporate banking and Islamic banking.

Dissertation

The dissertation element will give you an unique chance to develop your research abilities and deepen your expertise in an area of banking and finance in which you have developed a specific interest. 

Rankings

Our accounting and finance subjects at the University of Greenwich are ranked:

  • Third in London for student satisfaction in the Complete University Guide 2017
  • Third in London for course satisfaction in the Guardian University Guide 2016.

Greenwich is one of the top two most globally diverse universities in the UK, US, Australia and New Zealand, by Hotcourses Diversity Index.

We have also been named as one of the "most international" universities on the planet by Times Higher Education magazine.

Outcomes

This degree aims to:

  • Provide you with the key theoretical underpinnings and applied elements of banking, financial markets and financial institutions and offer opportunities to engage with related areas of specialism
  • Develop your understanding and appreciation of contemporary and defining issues faced by bankers and finance professionals through reflective, critical and evaluative thinking and teaching which is enhanced by research and professional practice
  • Enable you to become a competent practitioner in the field of banking and finance by equipping you with a blend of knowledge, technical skills, creativity and ethical values required to perform effectively in key management and strategic roles.

What you'll study

Full-time

Year 1

Students are required to study the following compulsory courses.

Students are required to choose 1 course from this list of options.

Part-time

Year 1

Students are required to study the following compulsory courses.

Students are required to choose 60 credits from this list of options.

Year 2

Students are required to study the following compulsory courses.

Students are required to choose 75 credits from this list of options.

Assessment

Students are assessed through:

  • Examinations
  • Coursework
  • Dissertation.

Careers

Graduates have management opportunities in the banking and finance areas. In recent years employers of our students and graduates include:

  • Barclays Financial Services
  • HSBC
  • Interamerican Bank
  • Merit Broker House
  • AXA
  • National Bank of Greece
  • Reserve Bank of Malawi
  • Vietcombank
  • Bank of Africa Group.

Helping graduates into careers is a very important part of our mission as a university. Job prospects for Greenwich graduates have been improving rapidly, with 93 per cent of 2014/15 Greenwich graduates looking for work were already in jobs or further study by January 2016 (according to latest national figures).

Employability

You will have frequent networking opportunities: Industry experts provide guest lectures, career development advice and curriculum input. Sector professionals are involved in developing content and teaching on various courses.

As part of our continuing Big Picture guest seminar series, senior executives from organisations including Northern Trust and Barclays are invited to pass on their insights and experience.

We have developed strong relations with companies in London's financial centres, including in the City, Canary Wharf and Fenchurch Street. This offers you networking, mentoring and internship opportunities in a perfect location to develop your career.

You can also reach out to top employers through our dedicated Business School Employability Office (BSEO). The BSEO team develops your employment skills through CV support, careers fairs, interview skills workshops and guidance through mentors to progress in the industry. 

The BSEO team was shortlisted for the Times Higher Education Leadership and Management Awards which shows its dedication to actively support your career development.

Extracurricular activities

We encourage you to join societies such as the Trading and Investment Society and take part in student competitions like the UK Trading Challenge. We are proud that our team of first year Greenwich students won the competition, beating teams from many other universities.



Read less
The oil and gas industries are widely affected by a growing range of factors, including shifting global economics, an evolving global energy mix and environmental issues. Read more
The oil and gas industries are widely affected by a growing range of factors, including shifting global economics, an evolving global energy mix and environmental issues.

There is an increasing demand for those working in the industries to develop an intelligent awareness of this complex business environment and to grasp the ways in which these changes will affect organisations.

Developed in conjunction with industry, the School of Engineering and Built Environment at GCU offers a suite of programmes designed to provide the knowledge required for a range of professional careers within the oil and gas industry.

The oil and gas industry instrumentation professional must be equipped to understand the principles and implementation of instrumentation, the importance of efficient and reliable measurement and control systems and have a suitably wide perspective of the subject area so that a number of different approaches to a problem can be identified. This programme addresses these requirements.

This course can also be taken in January 2018 - see the web-page for more details: http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P02555-1FTAB-1718/Applied_Instrumentation_and_Control_(Oil_&_Gas)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

Career Opportunities

The programme caters for an extremely wide range of industries and services for which the measurement of processes and environmental factors are vital to their business performance. It will also be of interest to companies that manufacture and supply such measurement systems. The range of industrial sectors includes: petrochemical, agrochemical, the food industry, pharmaceutical, environmental, optics and optoelectronics, medical instrumentation, power generation and the water industry. The employment areas within these sectors include: computer controlled instrumentation systems, process instrumentation, technical management and sales, process control and automation, sensor development and manufacture, instrument working and test and measurement systems.

Assessment

The taught modules are assessed by coursework only or a combination of coursework and examination. The MSc project is assessed by project reports, practical operation and an electronic presentation.

Read less

Show 10 15 30 per page



Cookie Policy    X