• University of Bristol Featured Masters Courses
  • Northumbria University Featured Masters Courses
  • Birmingham City University Featured Masters Courses
  • University of Northampton Featured Masters Courses
  • University of Surrey Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Cardiff University Featured Masters Courses
University of Nottingham in China Featured Masters Courses
Queen Mary University of London Featured Masters Courses
Anglia Ruskin University Featured Masters Courses
University of Dundee Featured Masters Courses
University of the West of England, Bristol Featured Masters Courses
"industrial" AND "instrum…×
0 miles

Masters Degrees (Industrial Instrumentation)

We have 138 Masters Degrees (Industrial Instrumentation)

  • "industrial" AND "instrumentation" ×
  • clear all
Showing 1 to 15 of 138
Order by 
WHAT YOU WILL GAIN. - Skills and know-how in the latest and developing technologies in instrumentation, process control and industrial automation. Read more

WHAT YOU WILL GAIN:

- Skills and know-how in the latest and developing technologies in instrumentation, process control and industrial automation

- Practical guidance and feedback from industrial automation experts from around the world

- Live knowledge from the extensive experience of expert instructors

- Credibility and respect as the local industrial automation expert in your firm

- Global networking contacts in the industry

- Improved career choices and income

- A valuable and accredited Master of Engineering (Industrial Automation)** qualification

Next intake is scheduled for June 25, 2018. Applications now open; places are limited.

Now also available on Campus. (http://oncampus.eit.edu.au)

INTRODUCTION

The respected International Society of Automation (ISA) estimated that at least 15,000 new automation engineers are needed annually in the US alone. Many industrial automation businesses throughout the world comment on the difficulty in finding experienced automation engineers despite paying outstanding salaries.

The Master of Engineering (Industrial Automation) perfectly addresses this gap in the Industrial Automation industry. The program's twelve core units, and project thesis, provide you with the practical knowledge and skills required. Students with a background in electrical, mechanical, instrumentation and control, or industrial computer systems engineering can benefit from this program.

The content has been carefully designed to provide you with relevant concepts and the tools required in today’s fast-moving work environment. For example, Power Engineering covers major equipment and technologies used in power systems, including power generation, transmission and distribution networks. Programmable Logic Controllers covers in-depth principles of operation of programmable controllers, networking, distributed controllers, and program control strategies. Industrial Process Control Systems combines the process identification and feedback control design with a broad understanding of the hardware, system architectures and software techniques widely used to evaluate and implement complex control solutions. Industrial Instrumentation identifies key features of widely used measurement techniques and transducers combined with microprocessor devices to create robust and reliable industrial instruments. Process Engineering will enable students to evaluate and apply complex process calculations through application of control principles. Industrial Data Communications provides the requisite knowledge to manage modern field buses and industrial wireless systems. Safety Systems provides an introduction to the common safety philosophy of hazard identification, risk management and risk-based design of protection methods and functional safety systems. SCADA and DCS cover hardware and software systems, evaluation of typical DCS and SCADA systems and configuration of DCS controllers. Special Topics enable students to incorporate current technologies and the knowledge acquired from the entire course and thus solve complex Industrial Automation problems.

The Masters project, as the capstone of the course, requires a high level of personal autonomy and accountability, and reinforces the knowledge and skill base developed in the preceding subjects. As a significant research component of the course, this project will facilitate research, critical evaluation and the application of knowledge and skills with creativity and initiative, enabling students to critique current professional practice in the Industrial Automation industry.

ENTRANCE REQUIREMENTS

To gain entry into the Master of Engineering (Industrial Automation), applicants need one of the following:

a) a recognized 3-year bachelor degree in an engineering qualification in a congruent* field of practice with relevant work experience**.

b) a 4-year Bachelor of Engineering qualification (or equivalent), that is recognized under the Washington Accord or Engineers Australia, in a congruent*, or a different field of practice at the discretion of the Admissions Committee.

c) a 4-year Bachelor of Engineering qualification (or equivalent) that is not recognized under the Washington Accord, in a congruent* field of practice to this program.

AND

An appropriate level of English Language Proficiency equivalent to an English pass level in an Australian Senior Certificate of Education, or an IELTS score of 6.5 (with no individual band less than 6), or equivalent as outlined in the EIT Admissions Policy.

*Congruent field of practice means one of the following with adequate Industrial Automation content (fields not listed below to be considered by the Dean and the Admissions Committee on a case-by-case basis):

• Industrial Automation

• Industrial Engineering

• Instrumentation, Control and Automation

• Mechanical Engineering

• Mechanical and Material Systems

• Mechatronic Systems

• Manufacturing and Management Systems

• Electrical Engineering

• Electronic and Communication Systems

• Chemical and Process Engineering

• Robotics

• Production Engineering

**Substantial industrial experience in a related field is preferred, with a minimum of two years’ relevant experience.

PROGRAM STRUCTURE

Students must complete 48 credit points comprised of 12 core subjects and one capstone thesis. The thesis is the equivalent of one full semester of work. There are no electives in this course. The course duration is two years full time, or equivalent. Subjects will be delivered over 4 semesters per year. Students will take 2 subjects per semester and be able to complete 8 subjects per year. There will be a short break between semesters. Each semester is 12 weeks long.

LIVE WEBINARS

During the program you will participate in weekly interactive sessions with the lecturers and other participants from around the world. Each unit's weekly live tutorial will last 60 to 90 minutes. We take student availability into consideration wherever possible before scheduling webinar times. All you need to participate is an adequate Internet connection, speakers and a microphone. The software package and setup details will be sent to you at the start of the program.

Professional Recognition

This online Master's Degree is an academically accredited program by the Australian Government agency Tertiary Education Quality and Standards Agency (TEQSA) and provisionally accredited by Engineers Australia under the Sydney and Washington accords. This EIT Master's Degree is internationally recognised under the International Engineering Alliance (IEA) accords and the various signatories (http://www.ieagreements.org/accords/washington/signatories/).



Read less
WHAT YOU WILL GAIN. Skills and know-how in the latest and developing technologies in instrumentation, process control and industrial automation. Read more

WHAT YOU WILL GAIN:

  • Skills and know-how in the latest and developing technologies in instrumentation, process control and industrial automation
  • Practical guidance and feedback from industrial automation experts from around the world
  • Live knowledge from the extensive experience of expert instructors
  • Credibility and respect as the local industrial automation expert in your firm
  • Global networking contacts in the industry
  • Improved career choices and income
  • A valuable and accredited Master of Engineering (Industrial Automation)** qualification

Perth Campus next intake is scheduled for February 2019. Applications now open; places are limited.

INTRODUCTION

The respected International Society of Automation (ISA) estimated that at least 15,000 new automation engineers are needed annually in the US alone. Many industrial automation businesses throughout the world comment on the difficulty in finding experienced automation engineers despite paying outstanding salaries.

The Master of Engineering (Industrial Automation) perfectly addresses this gap in the Industrial Automation industry. The program's twelve core units, and project thesis, provide you with the practical knowledge and skills required. Students with a background in electrical, mechanical, instrumentation and control, or industrial computer systems engineering can benefit from this program.

The content has been carefully designed to provide you with relevant concepts and the tools required in today’s fast-moving work environment. For example, Power Engineering covers major equipment and technologies used in power systems, including power generation, transmission and distribution networks. Programmable Logic Controllers covers in-depth principles of operation of programmable controllers, networking, distributed controllers, and program control strategies. Industrial Process Control Systems combines the process identification and feedback control design with a broad understanding of the hardware, system architectures and software techniques widely used to evaluate and implement complex control solutions. Industrial Instrumentation identifies key features of widely used measurement techniques and transducers combined with microprocessor devices to create robust and reliable industrial instruments. Process Engineering will enable students to evaluate and apply complex process calculations through application of control principles. Industrial Data Communications provides the requisite knowledge to manage modern field buses and industrial wireless systems. Safety Systems provides an introduction to the common safety philosophy of hazard identification, risk management and risk-based design of protection methods and functional safety systems. SCADA and DCS cover hardware and software systems, evaluation of typical DCS and SCADA systems and configuration of DCS controllers. Special Topics enable students to incorporate current technologies and the knowledge acquired from the entire course and thus solve complex Industrial Automation problems.

The Masters project, as the capstone of the course, requires a high level of personal autonomy and accountability, and reinforces the knowledge and skill base developed in the preceding subjects. As a significant research component of the course, this project will facilitate research, critical evaluation and the application of knowledge and skills with creativity and initiative, enabling students to critique current professional practice in the Industrial Automation industry.

Entry Requirements

To gain entry into the Master of Engineering (Industrial Automation), applicants need one of the following:

a) a recognized 3-year bachelor degree in an engineering qualification in a congruent* field of practice with relevant work experience**.

b) a 4-year Bachelor of Engineering qualification (or equivalent), that is recognized under the Washington Accord or Engineers Australia, in a congruent*, or a different field of practice at the discretion of the Admissions Committee.

c) a 4-year Bachelor of Engineering qualification (or equivalent) that is not recognized under the Washington Accord, in a congruent* field of practice to this program.

AND

An appropriate level of English Language Proficiency equivalent to an English pass level in an Australian Senior Certificate of Education, or an IELTS score of 6.5 (with no individual band less than 6), or equivalent as outlined in the EIT Admissions Policy.

*Congruent field of practice means one of the following with adequate Industrial Automation content (fields not listed below to be considered by the Dean and the Admissions Committee on a case-by-case basis):

• Industrial Automation

• Industrial Engineering

• Instrumentation, Control and Automation

• Mechanical Engineering

• Mechanical and Material Systems

• Mechatronic Systems

• Manufacturing and Management Systems

• Electrical Engineering

• Electronic and Communication Systems

• Chemical and Process Engineering

• Robotics

• Production Engineering

**Substantial industrial experience in a related field is preferred, with a minimum of two years’ relevant experience.

Program Structure

Students must complete 48 credit points comprised of 12 core subjects and one capstone thesis. The thesis is the equivalent of one full semester of work. There are no electives in this course. The course duration is two years full time, or equivalent. Subjects will be delivered over 4 semesters per year. Students will take 2 subjects per semester and be able to complete 8 subjects per year. There will be a short break between semesters. Each semester is 12 weeks long.

Live Webinars

During the program you will participate in weekly interactive sessions with the lecturers and other participants from around the world. Each unit's weekly live tutorial will last 60 to 90 minutes. We take student availability into consideration wherever possible before scheduling webinar times. All you need to participate is an adequate Internet connection, speakers and a microphone. The software package and setup details will be sent to you at the start of the program.

Course Fees

EIT provides distance education to students located almost anywhere in the world – it is one of the very few truly global training institutes. Course fees are paid in a currency that is determined by the student’s location. A full list of fees in a currency appropriate for every country would be complex to navigate and, with today’s exchange rate fluctuations, difficult to maintain. Instead we aim to give you a rapid response regarding fees that is customized to your individual circumstances.

We understand that cost is a major consideration before a student commences study. For a rapid reply to your query regarding courses fees and payment options, please query via the below button and we will respond within 2 business days.



Read less
We worked with industry professionals to develop an MSc Applied Instrument and Control programme that is accredited by the Institute of Measurement and Control (InstMC). Read more

We worked with industry professionals to develop an MSc Applied Instrument and Control programme that is accredited by the Institute of Measurement and Control (InstMC). It covers both the latest developments in the field and the industry knowledge we've gained through years of experience.

You'll acquire a specialised skillset and expertise that's highly desirable to employers, making you a competitive candidate for rewarding careers in many industries, with oil and gas pathways available. The programme draws on relevant case studies with real-world implications, so you'll gain practical knowledge that you can apply on the job from day one.

The programme also fulfils the Engineering Council's further learning requirements for registration as a Chartered Engineer.

  • Gain a solid foundation in measurement science and control theory
  • Practise data acquisition and instrument networking
  • Study analysis of systems for condition monitoring
  • Investigate fault detection and control system design
  • Complete a hands-on project in the industry for experiential learning

At GCU, you'll find a welcoming community of people like yourself - hardworking, career-focused individuals with the vision and discipline to pursue meaningful work. We'll help you develop the tools to be successful, in your career and in your life.

We hope you'll use those tools to make a positive impact on your community and contribute to the common good through everything you do.

What you will study

The curriculum has been developed in consultation with industry and can be broadly grouped in three areas: the introduction of new facts and concepts in measurement and control; the application of facts and concepts to real measurement problems and systems; and subjects which are of general importance to the professional engineer, for example safety and safety management and management ethics and project planning.

Students complete eight taught modules - four in trimester A and four in trimester B; and a Masters project in trimester C.The MSc project will be carried out at the student's workplace; this can be in an area relevant to the company's production/maintenance function, thus providing maximum benefit to both the company and the individual.

Control Systems

Consolidates advanced classical and modern control design techniques emphasising the practical considerations in applying control design in an industrial environment. The appropriateness and difficulties encountered in applying various design techniques in practice will be explored. In particular system sensitivity, robustness and nonlinearity will be studied.

Data Acquisition and Analysis

Develops the ability to evaluate, in a given situation, the most appropriate strategy for acquiring data and understand the merits of this strategy with respect to other approaches. A range of modern time and frequency domain analysis techniques will also be discussed.

Industrial Case Studies

Following on from the foundation in measurement and instrumentation provided by the Measurement Theory and Devices module, students will now be equipped to study in depth instrumentation in industrial processes. This module will cover aspects of designing sensor systems for industrial measurements, instrument control, system troubleshooting and optimisation in industrial applications.

Distributed Instrumentation

Develops the ability to evaluate, in a given situation, the most appropriate strategy for acquiring and transmitting data and understand the merits of this strategy with respect to other approaches. A wide range of different instrument communication and networking techniques will be studied. In addition the module provides practical experience of hardware setup and software development, relating to these techniques.

Industrial Process Systems

Identification and system modelling from real data play an important role in this module. This approach thus leads to more complex and realistic models that can be used to design more robust and reliable controllers that take into account problematic physical effects such as time-delays and sensor noise. The module will cover more advanced aspects of control design such as feed forward and multivariable control.

Measurement Systems

A range of advanced measurement systems will be studied in depth. Sensors, signal processing, low-level signal measurements, noise-reduction methods and appropriate measurement strategies will be applied to industrial and environmental applications. The influence of environmental factors and operation conditions will be considered in relation to the optimisation of the measurement system.

Measurement Theory and Devices

Adopts a generalised approach to measurement theory and devices, allowing students to become familiar with the characteristics of measurement systems in terms of the underlying principles. In this way, the students will be able to develop a systems approach to problem solving. They should find this methodology to be a considerable benefit to them when they have to apply their expertise to solving more complex industrial measurement problems.

Professional Practice

Develops the students' ability to select, develop and plan an MSc research project, to research and critically analyse the literature associated with the project and to present research findings effectively, it will also provide students with the ability to apply a competent process of thinking to project planning and give them a critical understanding of safe and ethical working.

Accreditation

The programme is accredited by the Institute of Measurement and Control (InstMC) as meeting the Engineering Council’s further learning requirements for registration as a Chartered Engineer.

Graduate prospects

The MSc Applied Instrumentation and Control offers graduates a highly focused skillset that's valuable to an extremely wide range of industries - any business that benefits from the measurement of process variables and environmental factors. For instance, chemicals, pharmaceuticals, optics and optoelectronics, medical instrumentation and more.

Across these industries, you might focus on computer-controlled instrumentation systems, process instrumentation, technical management and sales, process control and automation, sensor development and manufacturing, instrument networking, industrial development or test and measurement systems.

You might also pursue a career with a company that designs and manufactures measurement systems.



Read less
WHAT YOU WILL GAIN. ·        Skills and know-how in the latest and developing technologies in electrical and instrumentation in oil and gas. Read more

WHAT YOU WILL GAIN:

·        Skills and know-how in the latest and developing technologies in electrical and instrumentation in oil and gas

·        Practical guidance and feedback from electrical and instrumentation experts from around the world

·        Live knowledge from the extensive experience of expert instructors, rather than from just theoretical information gained from books and college

·        Credibility and respect as the local electrical and instrumentation in oil and gas expert in your firm

·        Global networking contacts in the industry

·        Improved career choices and income

·        A valuable and accredited Master of Engineering (Electrical and Instrumentation in Oil and Gas)** qualification

Next intake is scheduled for 2019.

INTRODUCTION

The Master of Engineering (Electrical and Instrumentation in Oil and Gas) is a comprehensive qualification for Design, Installation, Commissioning and Maintenance Engineers who are looking for a career in the onshore and offshore oil and gas industry. The course addresses the specific core competencies and associated underpinning knowledge required for the position of Principal Engineer.

There are twelve units in the degree which cover electrical & instrumentation (E&I) engineering, its design and the management of E&I personnel. Other topics include process control, process safety lifecycle management and the safetyintegrity of facilities. Power engineering, maintenance management and specialist areas such as emergency shutdown systems, fire and gas are also covered. The course is rounded off with a unit on project management.

The Masters project thesis, as the capstone of the course, requires a high level of personal autonomy and purpose; it reinforces the knowledge gained during the degree. As a significant research component of the course, this project requires students to examine and explore their subjects, make critical evaluations and apply their knowledge and skill. It aims to prepare and enable students to critique and potentially enhance current professional practice in the Oil and Gas industry.

ENTRANCE REQUIREMENTS

Entry Requirements: Master of Engineering (Electrical and Instrumentation in Oil and Gas)

 To gain entry into this program, applicants need one of the following:

a) a recognized 3-year bachelor degree* in an engineering qualification in a congruent** field of practice.

b) an EIT Bachelor of Science (Engineering) degree* in a congruent** field of practice.

c) a 4-year Bachelor of Engineering qualification (or equivalent), that is recognized under the Washington Accord or Engineers Australia, in a congruent**, or a different field of practice at the discretion of the Admissions Committee.

d) a 4-year Bachelor of Engineering qualification (or equivalent)* that is not recognized under the Washington Accord, in a congruent** field of practice to this program.

AND

An appropriate level of English Language Proficiency equivalent to an English pass level in an Australian Senior Certificate of Education, or an IELTS score of 6.0 (with no individual band less than 6.0), or equivalent as outlined in the EIT Admissions Policy.HE

* With integrated compulsory 12-week professional industry experience, training or project work of which 6 weeks are directly supervised by a professional/eligible professional engineer as determined by EIT.

** Congruent field of practice means one of the following with adequate Electrical and Instrumentation in Oil and Gas content (fields not listed below to be considered by the Dean and the Admissions Committee on a case-by-case basis):

• Electronic and Communication Systems

• Instrumentation, Control and Automation

• Industrial Automation

• Industrial Engineering

• Electrical Engineering

• Chemical Engineering

• Process Engineering

• Mechatronic Systems

• Production Engineering

• Robotics

PROGRAM STRUCTURE

Students must complete 48 credit points comprised of 12 core subjects and one capstone thesis. The thesis is the equivalent of one full semester of work. There are no electives in this course. The course duration is two years full time, or equivalent. Subjects will be delivered over 4 semesters per year. Students will take 2 subjects per semester and be able to complete 8 subjects per year. There will be a short break between semesters. Each semester is 12 weeks long.

LIVE WEBINARS

During the program you will participate in weekly interactive sessions with the lecturers and other participants from around the world. Each unit's weekly live tutorial will last 60 to 90 minutes. We take student availability into consideration wherever possible before scheduling webinar times. All you need to participate is an adequate Internet connection, speakers and a microphone. The software package and setup details will be sent to you at the start of the program.

COURSE FEES

EIT provides distance education to students located almost anywhere in the world – it is one of the very few truly global training institutes. Course fees are paid in a currency that is determined by the student’s location. A full list of fees in a currency appropriate for every country would be complex to navigate and, with today’s exchange rate fluctuations, difficult to maintain. Instead we aim to give you a rapid response regarding fees that is customized to your individual circumstances.

We understand that cost is a major consideration before a student commences study. For a rapid reply to your query regarding courses fees and payment options, please query via the below button and we will respond within 2 business days.



Read less
Design and optimisation of instrumentation and operative technique to facilitate an established surgical approach to a specific foot and ankle surgical intervention. Read more

Design and optimisation of instrumentation and operative technique to facilitate an established surgical approach to a specific foot and ankle surgical intervention. There is a growing awareness of the impact of human factors and design phycology on the effectiveness and acceptance of instrumentation for surgical procedures. User experience with surgical instrumentation can impact surgeon confidence with a particular instrument set, and can influence purchasing choices for implants and instrumentation. Much of the development of recent years has focused on high volume procedures in the hip, knee and spine. This project proposes the investigation of the application of the designCORE approach to human centred design to the area of foot and ankle surgery, which has historically been underserved. Through the application of industrial design techniques the insights captured by this approach will be brought through to concept realisation and validation through simulation with qualified health care professionals (HCP) in University Hospital Waterford (UHW). A key objective of the project will be the development, through this case study, of a human centred design approach suitable for use in a design controlled environment.

Methodology proposed

Secondary research will be conducted to establish the state of the art in terms of surgical instrument design and to develop an understanding of the design factors specific to medical device design. Through discussion with contacts at UHW a candidate surgical intervention will be identified and the researcher will conduct in-depth research into this procedure. Following the desktop based research the researcher will gather design insights through contextual enquiry and ethnographic investigation. Working through the designCORE method of human centred design these insights will be brought through iterative design steps to develop viable design solutions to true user need. Design iterations will be tested through video analysis and human factors engineering. Design solutions will subsequently be validated through simulation with the identified HCPs.

Expected outcomes: (e.g. deliverables & strategic impacts)

From a design perspective the project aims to produce one or more improvements to the instrumentation or workflow of an existing foot and ankle surgical technique. The project will also provide a practice based case study for the application of the human centred design approach to medical device design. The project will also provide a platform to develop a research collaboration with University Hospital Waterford from which may lead to further postgraduate research opportunities. Through continued collaboration a South East regional hub for design in a healthcare setting may ultimately be developed between ITC and WUH. It is anticipated that the study outcomes could be reported in a joint publication between ITC and the participants at WUH.



Read less
Why this course?. Civil engineering develops and improves facilities and services that society needs – from the supply of clean water and energy to the design and construction of roads, railways and stations. Read more

Why this course?

Civil engineering develops and improves facilities and services that society needs – from the supply of clean water and energy to the design and construction of roads, railways and stations. Solving problems of air, land and water pollution and protecting society against natural disasters are also important aspects of civil engineering.

Engineering graduates are in high demand from recruiting companies worldwide.

This 18-month MSc course has been designed to meet the needs of a broad range of engineering industries. As a Masters student, you’ll gain the specialist and generic skills necessary to lead future developments, with practical experience provided by the industrial placement.

The course has a significant design element based on the most up-to-date specialist design guidelines. This includes a major design project that integrates acquired knowledge and acts as a platform for structured self-learning.

This MSc in Civil Engineering with Industrial Placement is suitable for graduates with a background in any discipline of civil engineering. Applicants with a degree in environmental engineering, earth science, mathematics, physics and mechanical engineering may also be considered.

The MSc in Civil Engineering with Industrial Placement has four optional specialist streams:

  • Structural Engineering & Project Management
  • Geotechnical Engineering & Project Management
  • Geoenvironmental Engineering & Project Management
  • Water Engineering & Project Management

Industrial placement or industry-linked project

You'll complete an industry-linked project or industrial placement in the period from June to August. The Department will support you in making applications for industry internships, and will provide project topics with industry partners, for industry-linked projects. Industry-linked projects generally involve a short secondment to industry as part of the project.

You’ll study

You'll take the compulsory module Civil Engineering Design Projects. This module gives you the opportunity to work on real projects. Students currently undertake a renewable energy project. You’ll develop comprehensive and innovative designs that involve structural engineering, geotechnical engineering and water engineering, management, environmental and financial planning.

In additional to the industrial placement you'll also take the compulsory module Research Protocols for Science & Engineering which supports the dissertation project. You also have a wide choice of optional modules.

Following successful completion of the taught component, you’ll undertake a dissertation. If you’re on one of the specialist streams you’ll undertake a research project on a topic related to that stream. The dissertation can be linked to the industrial placement and worked on together with the industrial partner.

New class

Starting in session 2017-18, a new class on Building Information Modelling (BIM) will be available as an option for students who register for this MSc. Knowledge of BIM, a process for creating and managing information on a construction project across the project lifecycle, is sought after by employers.

Facilities

Our £6 million state-of-the-art laboratory facilities are well-equipped with high-technological instrumentation and available space to investigate:

  • environmental & molecular microbiology
  • environmental chemistry
  • analytical chemistry
  • geomechanics & soil quality
  • structural design & material science

Accreditation

The MSc Civil Engineering programme (including the specialist streams except for the water engineering stream) has been fully accredited by Joint Board of Moderators (JBM) as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired a partial CEng accredited undergraduate first degree.

The accreditation of MSc in Civil Engineering with Water Engineering & Project Management will be applied three years after initial launch in 2016.

Course structure

You'll take 210 credits made up of 120 credit taught modules, 30 credits industrial placement and 60 credits dissertation. The 18 months full-time MSc course spans three semesters as follows:

  • Semester 1 – Year 1, January to May - 60 credits of taught classes
  • Industrial placement – Year 1, June to September - 30 credits
  • Semester 2 – Year 1, October to December - Research methods and design project classes and 30 credits of taught classes
  • Semester 3 – Year 2, January to June - 60 credits dissertation

Learning & teaching

Some classes involve fieldtrips and/or lab work. For fieldtrips, you need to wear warm clothing, waterproof jacket/trousers and sturdy shoes/boots (e.g. hiking boots or non-slip wellington boots).

Careers

High-calibre civil engineers are in demand throughout the world. As a graduate you'll have many different career options including:

  • engineering consultancies, where the work normally involves planning and designing projects
  • contractors, where you’ll be managing and overseeing works on-site
  • working for utilities or local authorities
  • working for large companies such as those within oil & gas production, mining, power generation, renewable energy & sustainable infrastructure

For lab work, you’ll need a lab coat.



Read less
IN THIS INTENSIVE, PART-TIME, 18-MONTH ONLINE PROGRAM YOU WILL GAIN. - Skills and know-how in the latest technologies in E & I oil and gas engineering. Read more

IN THIS INTENSIVE, PART-TIME, 18-MONTH ONLINE PROGRAM YOU WILL GAIN:

- Skills and know-how in the latest technologies in E & I oil and gas engineering

- Tremendous boost to your E & I oil and gas career – no matter whether you are a new graduate or a technician

- Decades of real experience distilled into the course presentations and materials

- Guidance from real E & I oil and gas experts in the field

- Hands-on practical knowledge from the extensive experience of instructors, rather than the theoretical information from books and colleges

- Credibility as the local expert in E & I oil and gas

- Networking contacts in the oil and gas industry

- Improved career prospects and income

- An Advanced Diploma in Electrical & Instrumentation Engineering for Oil and Gas

Next intake is scheduled for September 3, 2018. Applications are now open; places are limited.

INTRODUCTION

There is a growing shortage, and hence opportunity, for Electrical and Instrumentation (E & I) technicians, technologists and engineers in the oil and gas industry. This is due to an increasing need for higher technology methods of obtaining and processing oil and gas as it is a finite declining resource. The technical challenges of extracting oil and gas are becoming ever more demanding, with increasing emphasis on more marginal fields and previously inaccessible zones such as deep oceans, Polar regions, Falkland Islands and Greenland. The aim of this 18-month e-learning program is to provide you with core E & I engineering skills so that these opportunities may be accessed, to enhance your career, and to benefit your firm.

This advanced diploma is presented by lecturers who are highly experienced engineers from industry, having 'worked in the trenches' in the various E & I engineering areas. When doing any course today, a mix of both extensive experience and teaching prowess is essential. All our lecturers have been carefully selected and are seasoned professionals.

This advanced diploma course provides a practical treatment of electrical power systems and instrumentation within the oil, gas, petrochemical and offshore industries. Whilst there is some theory this is used in a practical context giving you the necessary tools to ensure that the Electrical and Instrumentation hardware is delivering the results intended. No matter whether you are a new electrical, instrumentation or control technician/technologist/graduate engineer or indeed, even a practicing facilities engineer, you will find this course beneficial in improving your understanding, skills and knowledge of the whole spectrum of activities ranging from basic E & I engineering to advanced practice including hazardous areas, data communications along with a vast array of E & I equipment utilized in an oil and gas environment.

WHO SHOULD COMPLETE THIS PROGRAM?

This program would be ideal for you if you are seeking to get know-how and expertise in the oil and gas business and are an:

- Instrument and process control technician or technologist

- Instrument fitter

- Chemical or mechanical engineer

- Electrical engineer currently working in a different area to oil and gas

- Experienced electrician

- A recent graduate electrical, instrumentation or mechanical engineer

Even if you are highly experienced you will find this a great way to become familiar with the oil and gas technology as quickly as possible.

COURSE CONTENT

The valuable oil and gas program has five main streams:

- Electrical engineering

- Instrumentation and Control engineering

- General Oil and Gas engineering

- Subsea Instrumentation and Control

- Floating Production, Storage and Offloading (FPSO) Facilities

COURSE FEES

EIT provides distance education to students located almost anywhere in the world – it is one of the very few truly global training institutes. Course fees are paid in a currency that is determined by the student’s location. A full list of fees in a currency appropriate for every country would be complex to navigate and, with today’s exchange rate fluctuations, difficult to maintain. Instead we aim to give you a rapid response regarding fees that is customized to your individual circumstances.

We understand that cost is a major consideration before a student commences study. For a rapid reply to your query regarding courses fees and payment options, please query via the below button and we will respond within 2 business days.



Read less
This course is accredited by the Institute of Measurement and Control. You’ll specialise in control and instrumentation, and develop the skills and knowledge you’ll need to apply for registration as a Chartered Engineer (CEng) when you graduate. Read more

About this course

This course is accredited by the Institute of Measurement and Control. You’ll specialise in control and instrumentation, and develop the skills and knowledge you’ll need to apply for registration as a Chartered Engineer (CEng) when you graduate.

The course is flexible, so you’ll have lots of choice in the specialist subject modules you take and the ways you learn. You’ll be taught by experienced and supportive tutors, who will help you reach your full potential and you’ll develop the skills and knowledge employers are looking for in areas such as automotive, aerospace, petrochemical, scientific or manufacturing applications.

You'll focus on advanced aspects of control and instrumentation, alongside broader engineering topics. You'll deepen your knowledge of control and instrumentation while addressing current engineering issues and technological advanced across a broad spectrum of subjects.

You’ll study modules such as:

Research Methods: Application and Evaluation
Intelligent Instrumentation Systems
Embedded Systems Design
CPD and Strategic Management
Modern Control System Design
Industrial Electronics
Negotiated Technical Module
Independent Engineering Scholarship

Read less
This course has been developed in consultation with the nuclear engineering industry to provide advanced theoretical and practical knowledge to work with modern control and instrumentation technologies. Read more

This course has been developed in consultation with the nuclear engineering industry to provide advanced theoretical and practical knowledge to work with modern control and instrumentation technologies. This course offers an opportunity not only to specialise in nuclear engineering control, instrumentation and standards for operation and maintenance but also provides sufficient scope for students wishing to develop advanced skills in modern automation and in working with large industrial networks.

You may build valuable skills through a selection of option units and a project to gain advanced knowledge in sustainable energy systems and smart technologies for power system applications or in specialising in embedded systems as well as in applied digital signal processing for industrial applications. The course will also offer opportunities for those interested in combining engineering skills with management practice.

You will learn advanced concepts in the principles and operation of instrumentation for control, including control system architectures, communications, open systems security, hazard analysis, system reliability, safety and protection.

The course enables the appreciation of the practical aspects of control design and maintenance and offers hands-on experience in designing and developing solutions for control problem-solving using the IEC61131-3 standard. The course covers specialist and intelligent sensor systems, PLC-based control, Profibus and Profinet.

Accredited by the Institution of Engineering and Technology on behalf of the Engineering Council as meeting the requirements for Further Learning for registration as a Chartered Engineer. Candidates must hold a CEng accredited BEng/BSc (Hons) undergraduate first degree to comply with full CEng registration requirements.

Features and benefits of the course

-Research in the School of Engineering was rated 'internationally excellent' in the Research Excellence Framework (REF).

-Many of our academic staff who teach worked in their industry sector and have well-established links and contacts, ensuring that our curriculum is relevant for future employment.

-Engineering facilities are excellent with a dedicated £4m heavy engineering workshop for research and teaching in surface engineering, materials and dynamics, and state-of-the-art kit including rapid prototyping machines and water jet cutters

About the Course

Our engineering Masters programmes are designed to meet the needs of an industry which looks to employ postgraduates who can learn independently and apply critical thinking to real-world problems. Many of the staff who teach in the School also have experience of working in industry and have well-established links and contacts in their industry sector, ensuring your education and training is relevant to future employment.

Assessment details

Assessment is though a combination of written reports, oral presentations, practical assignments and written examinations.



Read less
About the course. This option will not only teach you about the fundamental and advanced concepts of modelling, simulation, control, optimisation and systems engineering, but also provides you with a range of management techniques, including. Read more

About the course

This option will not only teach you about the fundamental and advanced concepts of modelling, simulation, control, optimisation and systems engineering, but also provides you with a range of management techniques, including: project management, risk management, professional skills and effective management of innovative development.

Our world-leading research and our partnerships with industry give you an advantage in a competitive careers market. You’ll learn about the very latest developments in systems, control, computational intelligence and robotics – effectively preparing you for a future in engineering.

[Push yourself further]]

We have cutting edge facilities and technology, including: advanced control and systems software, modelling, simulation and controller design tools, robotics and a flexible manufacturing systems laboratory, evolutionary computing laboratory and clean facilities for the assembly of satellite instrumentation.

Make your mark

You could pursue a career with a large international organisation or government department. Our graduates work in sectors such as manufacturing, power generation and sustainable energy, with companies including British Airways, Jaguar Land Rover, NASA, IBM, Rolls-Royce and Unilever.

A masters from Sheffield is the mark of someone with the skills to apply their knowledge in industry, anywhere in the world. Our MSc in Advanced Control and Systems Engineering is accredited by the Engineering Council UK, IET and InstMC. These marks of assurance mean our degrees meet the high standards set by the engineering profession.

A Sheffield masters is a strong foundation for a career in industry or research.

Industry links

We have strong links with industrial partners such as Rolls-Royce and BAE Systems. Our industrial partners help us to design our courses, making sure you learn the right skills.

Rolls-Royce has a research and development centre here, using our expertise to explore today’s challenges. Our masters students often work side by side with researchers at these facilities.

A stimulating environment

The 2014 Research Excellence Framework (REF) rates us No 1 in the UK for research output, ahead of Oxford and Cambridge, and No 3 for overall research excellence. Our world-class reputation attracts highly motivated staff and students.

You’ll be taught by staff who work on real-world projects, developing new ideas – for submarines, robots, Formula One and even space exploration. Their approach to teaching is just as innovative: ideas like the award-winning take-home lab kit and e-puck mobile robotics activities help you develop the problem-solving skills you need for a trailblazing career.

Core Modules

Foundations of Control Systems; State-Space, Optimal Control and Nonlinear Systems; Signal Processing and Estimation; Embedded Systems and Rapid Control Prototyping; Managing Engineering Projects and Risk; Design Innovation Toolbox; Professional Responsibilities of the Engineer; Control Systems Project and Dissertation.

Examples of optional modules

Advanced Industrial Control; Robotic and Autonomous Systems; Intelligent and Vision Systems; Multisensor and Decision Systems; Nonlinear and Hybrid Systems.

Teaching and Assessment

There are lectures, tutorials, laboratory work and individual assignments. You will be assessed on examinations, coursework assignments and a project dissertation.



Read less
This MSc provides advanced training and enhances your skills in the specialised area of electronics, communications and computer engineering. Read more

This MSc provides advanced training and enhances your skills in the specialised area of electronics, communications and computer engineering.

The course aims to provide you with a comprehensive coverage of the skills required by an engineer working in instrumentation, electronic systems, wireless and wired telecommunications, computer hardware, and software aspects of computer engineering.

The programme provides an excellent basis for engineers wishing to update their knowledge, students who wish to embark a career in advance research and development, or for students wishing to enhance their training and qualifications.

Key facts

Particular features of the programme include:

  • incorporating 6 months industrial internship as part of the curriculum
  • teaching informed by active leading-edge researchers in the field
  • innovative and engaging teaching methods
  • one-to-one project consultation with expert members of staff
  • access to many online resources and flexibility in course content. This is a highly flexible course, which gives you the opportunity to choose modules according to your specific interests and requirements.

Course content and structure

After completing the taught components of the course, you will undertake an industrial internship placement with the major industry players in the field of electronics, communications and computer engineering. Subsequently, with knowledge/skills gained through industrial internship period, you will proceed with highly industry-oriented research project supervised by our expert members of faculty staffs.

This course operates on a modular basis and consists of a series of taught modules (worth 120 credits), followed by 6 months of non-credit bearing industrial internship. During the industrial internship, you will explore your interest in a specific research topic/project dissertation which will be beginning right after your industrial placement. The project dissertation will be 60-credit worth, and will begin in the following spring period.

You will be taught using the latest advances in teaching methods and electronic resources, as well as small-group and individual tutorial.

Tutors provide feedback on assignments. Our objective is to help you develop the confidence to work as a professional academic, at ease with the conventions of the discipline, and ready to tackle any area of research in electronic communications and computer engineering.

Modules offered

  • Instrumentation and Measurement
  • Engineering Ultrasonics
  • Optical Communications and Networks
  • HDL for Programmable Logic
  • Applied Computational Engineering
  • Integrated Photonics: Design and Technology
  • Control Systems Design
  • Electronic Design
  • Solid State Devices
  • Digital Communications
  • Power Electronic Design
  • Embedded Computing
  • Digital Signal Processing for Telecommunication Multimedia and Instrumentation
  • RF Microelectronics
  • Mobile Communications
  • VLSI Design
  • Telecommunication Electronics
  • Web Based Computing
  • Optical Communications
  • Applied Computational Engineering

Internship programme​

The internships are with IC design, solid-state electronics, automotive electronics or semiconductor industries that are mainly located in Ningbo/Shanghai. Our partners are either international or locally-bred, such as Ningbo Advanced Memory Technology Corporation, Atmel, Sondrel, AMD and Bosch. We may expand our internship programme in Hong Kong, South Korea, etc in the future.



Read less
IUP’s new two-year interdisciplinary graduate degree prepares you for an emerging trend in the job market. A combination of science coursework and professional skills courses in management, marketing, and communications will advance your career to new heights. Read more
IUP’s new two-year interdisciplinary graduate degree prepares you for an emerging trend in the job market. A combination of science coursework and professional skills courses in management, marketing, and communications will advance your career to new heights.

Following completion of science proficiency courses, you’ll take professional development courses designed to augment your scientific knowledge with communication, business, and management skills to better prepare you to meet the technology challenges of a company.

The PSM internship allows you to gain hands-on industry experience and lets you earn your degree while working full time. The internship gives you experience in managing the breakthroughs created by your company’s research teams. You’ll interact with scientific researchers and business managers, especially in the marketing, finance, and legal departments.

The PSM in Applied and Industrial Chemistry provides the skill set necessary for linking scientific operations with management decisions and marketing strategies.

The PSM degree will prepare you to:
-Master non-science subjects in business, communications, and information technology.
-Interact with scientific researchers and business managers through your internship, especially in the marketing, finance, and legal departments.
-Access a wide assortment of modern instrumentation for research and to fulfill IUP coursework requirements.

Read less
The School of Engineering and Digital Arts offers research-led degrees in a wide range of research disciplines, related to Electronic, Control and Information Engineering, in a highly stimulating academic environment. Read more
The School of Engineering and Digital Arts offers research-led degrees in a wide range of research disciplines, related to Electronic, Control and Information Engineering, in a highly stimulating academic environment. The School enjoys an international reputation for its work and prides itself in allowing students the freedom to realise their maximum potential.

Established over 40 years ago, the School has developed a top-quality teaching and research base, receiving excellent ratings in both research and teaching assessments.

We undertake high-quality research that has had significant national and international impact, and our spread of expertise allows us to respond rapidly to new developments. Our 30 academic staff and over 130 postgraduate students and research staff provide an ideal focus to effectively support a high level of research activity. There is a thriving student population studying for postgraduate degrees in a friendly and supportive teaching and research environment.

We have research funding from the Research Councils UK, European research programmes, a number of industrial and commercial companies and government agencies including the Ministry of Defence. Our Electronic Systems Design Centre and Digital Media Hub provide training and consultancy for a wide range of companies. Many of our research projects are collaborative, and we have well-developed links with institutions worldwide.

Visit the website https://www.kent.ac.uk/courses/postgraduate/262/electronic-engineering

Project opportunities

Some projects available for postgraduate research degrees (http://www.eda.kent.ac.uk/postgraduate/projects_funding/pgr_projects.aspx).

Research areas

- Communications

The Group’s activities cover system and component technologies from microwave to terahertz frequencies. These include photonics, antennae and wireless components for a broad range of communication systems. The Group has extensive software research tools together with antenna anechoic chambers, network and spectrum analysers to millimetre wave frequencies and optical signal generation, processing and measurement facilities. Current research themes include:

- photonic components
- networks/wireless systems
- microwave and millimetre-wave systems
- antenna systems
- radio-over-fibre systems
- electromagnetic bandgaps and metamaterials
- frequency selective surfaces.

- Intelligent Interactions:

The Intelligent Interactions group has interests in all aspects of information engineering and human-machine interactions. It was formed in 2014 by the merger of the Image and Information Research Group and the Digital Media Research Group.

The group has an international reputation for its work in a number of key application areas. These include: image processing and vision, pattern recognition, interaction design, social, ubiquitous and mobile computing with a range of applications in security and biometrics, healthcare, e-learning, computer games, digital film and animation.

- Social and Affective Computing
- Assistive Robotics and Human-Robot Interaction
- Brain-Computer Interfaces
- Mobile, Ubiquitous and Pervasive Computing
- Sensor Networks and Data Analytics
- Biometric and Forensic Technologies
- Behaviour Models for Security
- Distributed Systems Security (Cloud Computing, Internet of Things)
- Advanced Pattern Recognition (medical imaging, document and handwriting recognition, animal biometrics)
- Computer Animation, Game Design and Game Technologies
- Virtual and Augmented Reality
- Digital Arts, Virtual Narratives.

- Instrumentation, Control and Embedded Systems:

The Instrumentation, Control and Embedded Systems Research Group comprises a mixture of highly experienced, young and vibrant academics working in three complementary research themes – embedded systems, instrumentation and control. The Group has established a major reputation in recent years for solving challenging scientific and technical problems across a range of industrial sectors, and has strong links with many European countries through EU-funded research programmes. The Group also has a history of industrial collaboration in the UK through Knowledge Transfer Partnerships.

The Group’s main expertise lies primarily in image processing, signal processing, embedded systems, optical sensors, neural networks, and systems on chip and advanced control. It is currently working in the following areas:

- monitoring and characterisation of combustion flames
- flow measurement of particulate solids
- medical instrumentation
- control of autonomous vehicles
- control of time-delay systems
- high-speed architectures for real-time image processing
- novel signal processing architectures based on logarithmic arithmetic.

Careers

We have developed our programmes with a number of industrial organisations, which means that successful students are in a strong position to build a long-term career in this important discipline. You develop the skills and capabilities that employers are looking for, including problem solving, independent thought, report-writing, time management, leadership skills, team-working and good communication.

Kent has an excellent record for postgraduate employment: over 94% of our postgraduate students who graduated in 2013 found a job or further study opportunity within six months.

Building on Kent’s success as the region’s leading institution for student employability, we offer many opportunities for you to gain worthwhile experience and develop the specific skills and aptitudes that employers value.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
This one-year full-time taught MSc programme (or up to six years part-time) will equip you for a career in any industry involving radiation and radiation detectors. Read more
This one-year full-time taught MSc programme (or up to six years part-time) will equip you for a career in any industry involving radiation and radiation detectors.

We cover basic radiation principles, the use of detection systems and associated instrumentation applications, and modelling. There’s a strong focus on practicals and laboratory-based techniques.

You’ll be able to carry out a project, often in industry, making you even more employable in sectors such as nuclear power, medicine, environmental protection, oil and mining, and health and safety.

The programme consists of a number of one-week modules which you can select to best meet your needs. These modules are organised into four groups:-

Foundation
Basic
Applied
Project and Dissertation.

For your MSc you must complete your chosen modules and one major project to a value of 180 credits. Diploma (120 credits) and Certificate (60 credits) may also be available if you don’t want to submit a dissertation.

Key Facts

REF 2014
We're 15th in UK for 4* and 3*research (world leading and internationally excellent), and we achieved 100% excellence in a research environment.

Why Department of Physics?

Excellent facilities

We're a major centre for research and recieve around £35m of funding per year from the research councils, the University and other sources.

Exciting, rigorous research environment

Study for a Physics PhD, MPhil, MRes or pursue one of our taught MSc programmes.

Read less
Electrical and electronic engineering are the foundation of 21st century innovations. from digital communications to robotics systems, from sustainable energy to smart environments. Read more

Electrical and electronic engineering are the foundation of 21st century innovations: from digital communications to robotics systems, from sustainable energy to smart environments. With the MSc Electrical and Electronic Engineering from GCU, you'll develop the skills to work at the forefront of these exciting fields. Through discovery and invention, you can build a better future for humanity and contribute to the common good.

Accredited by the Institution of Engineering and Technology (IET), the programme also meets the Engineering Council's further learning requirements to become a Chartered Engineer. It offers advanced study and ideal preparation so you can enter the next stage of your career. You'll also find professional development opportunities for your continued growth as a successful engineer.

The curriculum offers a comprehensive exploration of electrical and electronic engineering, with particular emphasis on today's fast-growing fields of energy engineering and renewable technologies.

  • Expand your understanding of power systems and instrumentation systems
  • Investigate telecommunications systems and technologies
  • Solidify your personal skills and practise collaborating with a team
  • Connect your learning to the real world with industry case studies and on-the-ground assignments

The MSc Electrical and Electronic Engineering offers two options for specialisation.

  • Digital Systems and Telecommunications - Master communication technologies and systems
  • Mechatronics - Study the electronic control of mechanical and intelligent robotic systems

What you will study

In addition to the knowledge and understanding of electrical and electronic engineering the programme will provide an integrated understanding of power systems, instrumentation systems, telecommunications systems and business operations, reinforced with personal and inter-personal skills.

Electrical Power Systems

The module examines topics relating to electric power generation, transmission, distribution and utilisation. This will include examination of individual power system components such as generators, transformers, overhead lines, underground cables, switchgears and protection systems as well as analysis of load flow and system fault conditions which are required for power system design and operation.

Advanced Industrial Communication Systems

Aims to provide a comprehensive knowledge and understanding of modern industrial communications systems. The operation of a wide range of state-of-the-art advanced communications systems will be studied, e.g. SCADA, satellite systems, digital cellular mobile networks and wireless sensor networks.

Measurement Theories and Devices

The generalised approach to measurement theory and devices adopted in this module will allow students to become familiar with the characteristics of measurement systems in terms of the underlying principles. Students should find this methodology to be a considerable benefit to them when they apply their expertise to solving more complex industrial measurement problems.

Measurement Systems

A range of advanced measurement systems will be studied in depth. Sensors, signal processing, low-level signal measurements, noise reduction methods and appropriate measurement strategies will be applied to industrial and environmental applications. The influence of environmental factors and operation conditions will be considered in relation to the optimisation of the measurement system.

Energy, Audit and Asset Management

Focuses on techniques for auditing and managing the amount of energy used in a range of industrial processes. The module will provide an understanding of the strategies and procedures of energy audit and energy asset management. Using case studies throughout, the module will present energy audit, managing energy usage, factors affecting energy efficiency on plant, and cost benefit analysis of introducing alternative strategies and technologies.

Professional Practice

Focuses on two themes, the first aims to develop student moral autonomy within a professional technology framework. It will examine moral issues and moral decision processes through evaluative enquiry and application of professional codes of conduct specifically in relation to design, information technology and the Internet. The second theme enhances the student's knowledge of concepts, methods and application of technology and environmental management as applied to a new or existing venture.

Renewable Energy Technologies

Renewable energy is regarded as an integral part of a sustainable development strategy. This module concentrates on the renewable energy technologies most likely to succeed in the UK and other temperate countries, i.e. solar energy, energy from waste, wind, hydro and biomass.

Condition Monitoring

Aims to provide an understanding of both Mechanical and Electrical Condition monitoring and associated instrumentation requirements for successful condition monitoring. The main focus in Mechanical Condition Monitoring is vibration monitoring since this is the most popular method of determining the condition and diagnosing faults in rotational machines, although other techniques used in condition monitoring are also covered.

Accreditation

MSc Electrical and Electronic Engineering is accredited by the Institution of Engineering and Technology (IET) and its students meet the UK Engineering Council’s further learning requirements for registration as a Chartered Engineer.

Assessment methods

Students will be assessed via a combination of examinations, coursework, presentations,case study analysis, reports and the final dissertation.

Graduate prospects

Your degree and specialist knowledge will guarantee you excellent career opportunities around the world. You might find work in the electrical power industry, the renewable energy sector, the offshore industry, transport engineering, electronic engineering or telecommunications.



Read less

Show 10 15 30 per page



Cookie Policy    X