• University of Bristol Featured Masters Courses
  • Northumbria University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of Leeds Featured Masters Courses
  • Jacobs University Bremen gGmbH Featured Masters Courses
  • University of Derby Online Learning Featured Masters Courses
  • Aberystwyth University Featured Masters Courses

Postgrad LIVE! Study Fair

Birmingham | Bristol | Sheffield | Liverpool | Edinburgh

University College London Featured Masters Courses
University of Reading Featured Masters Courses
University of Bedfordshire Featured Masters Courses
Durham University Featured Masters Courses
London School of Economics and Political Science Featured Masters Courses
"engineering" AND "projec…×
0 miles

Masters Degrees (Engineering And Project Management)

We have 1,928 Masters Degrees (Engineering And Project Management)

  • "engineering" AND "project" AND "management" ×
  • clear all
Showing 1 to 15 of 1,928
Order by 
The Masters in Civil Engineering & Management introduces you to contemporary business and management issues while increasing your depth of knowledge in your chosen civil engineering speciality. Read more
The Masters in Civil Engineering & Management introduces you to contemporary business and management issues while increasing your depth of knowledge in your chosen civil engineering speciality.

Why this programme

◾Civil engineering at the University of Glasgow is ranked 4th in the UK and 1st in Scotland (Guardian University Guide 2017).
◾With a 93% overall student satisfaction in the National Student Survey 2016, Civil Engineering at Glasgow continues to meet student expectations combining both teaching excellence and a supportive learning environment.
◾The University has a long history of research in Civil Engineering. The UK's first Chair of Civil Engineering was established at the University in 1840 and early occupants such as William J. M. Rankine set a research ethos that has endured.
◾You will be taught jointly by staff from the School of Engineering and the Adam Smith Business School. You will benefit from their combined resources and expertise and from an industry-focused curriculum.
◾If you are a graduate engineer looking to broaden your knowledge of management while also furthering your knowledge of civil engineering, this innovative programme is designed for you.
◾You will gain first-hand experience of managing an engineering project through the integrated systems design project, allowing development of skills in project management, quality management and costing.
◾You will be able to apply management to engineering projects, allowing you to gain an advantage in today’s competitive job market and advance to the most senior positions within an engineering organisation.
◾This programme has a September and January intake.

Programme structure

There are two semesters of taught material and a summer session during which you will work on an individual supervised project and write a dissertation on its outcomes. Students entering the programme in January are restricted to civil engineering (i.e. excluding management) topics only.

Semester 1

You will be based in the Adam Smith Business School, developing knowledge and skills in management principles and techniques. We offer an applied approach, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.
◾Contemporary issues in human resource management
◾Managing creativity and innovation
◾Managing innovative change
◾Marketing management
◾Operations management
◾Project management.

Semester 2

You will study engineering courses, which aim to enhance your group working and project management capability at the same time as improving your depth of knowledge in chosen civil engineering subjects.
◾Integrated systems design project.

Optional courses

Select a total of 4 courses from Lists A and B, at least 1 must be from List A:

List A

◾Advanced soil mechanics 5
◾Advanced structural analysis and dynamics 5
◾Computational modelling of non-linear problems 5
◾Introduction to wind engineering
◾Principles of GIS.

List B

◾Geotechnical engineering 3
◾Ground engineering 4
◾Recycling urban land
◾Structural analysis 4
◾Transportation systems engineering 4.

Project or dissertation

You will undertake an individual project or dissertation work in the summer period (May–August). This will give you an opportunity to apply and consolidate the course material and enhance your ability to do independent work, as well as present results in the most appropriate format. Project and dissertation options are closely linked to staff research interests. September entry students have a choice of management dissertation topics in addition to civil engineering projects, and January entry students have a choice of civil engineering projects.

Projects

There are two semesters of taught material and a summer session during which you will work on an individual supervised project and write a dissertation on its outcomes. Students entering the programme in January are restricted to civil engineering (i.e. excluding management) topics only.

Semester 1

You will be based in the Adam Smith Business School, developing knowledge and skills in management principles and techniques. We offer an applied approach, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.
◾Contemporary issues in human resource management
◾Managing creativity and innovation
◾Managing innovative change
◾Marketing management
◾Operations management
◾Project management.

Semester 2

You will study engineering courses, which aim to enhance your group working and project management capability at the same time as improving your depth of knowledge in chosen civil engineering subjects.
◾Integrated systems design project.

Optional courses

Select a total of 4 courses from Lists A and B, at least 1 must be from List A:

List A
◾Advanced soil mechanics 5
◾Advanced structural analysis and dynamics 5
◾Computational modelling of non-linear problems 5
◾Introduction to wind engineering
◾Principles of GIS.

List B
◾Geotechnical engineering 3
◾Ground engineering 4
◾Recycling urban land
◾Structural analysis 4
◾Transportation systems engineering 4.

Project or dissertation

You will undertake an individual project or dissertation work in the summer period (May–August). This will give you an opportunity to apply and consolidate the course material and enhance your ability to do independent work, as well as present results in the most appropriate format. Project and dissertation options are closely linked to staff research interests. September entry students have a choice of management dissertation topics in addition to civil engineering projects, and January entry students have a choice of civil engineering projects.

Industry links and employability

◾The programme makes use of the combined resources and complementary expertise of the civil engineering and business school staff to deliver a curriculum which is relevant to the needs of industry.
◾You, as a graduate of this programme, will be capable of applying the extremely important aspect of management to engineering projects allowing you to gain an advantage in today’s competitive job market and advance to the most senior positions within an engineering organisation.
◾The School of Engineering has extensive contacts with industrial partners who contribute to several of their taught courses, through active teaching, curriculum development, and panel discussion. Recent contributions in Civil Engineering include: Arup and Mott MacDonald.
◾During the programme students have an opportunity to develop and practice relevant professional and transferable skills, and to meet and learn from employers about working in the civil engineering industry.

Read less
Competency in project management has become a key part of the skills-set of every construction professional and executive, with many construction project managers functioning in a strategic and co-ordinating role in the delivery of the client’s physical development and investment programme. Read more
Competency in project management has become a key part of the skills-set of every construction professional and executive, with many construction project managers functioning in a strategic and co-ordinating role in the delivery of the client’s physical development and investment programme.

Society continues to value and shape the built environment resulting in both public and private investment in construction assets and the successful completion of construction projects. As these projects become more socially and technically complex in a changing world dominated by a concern for sustainability, there has been a growing challenge to develop existing and new skills and expertise in construction project management. This challenge is not only national but global as the need for construction project management skills continues to grow internationally. Indeed, our student cohorts reflect this global challenge with students from across multiple continents.

We have been running programmes in MSc Construction Project Management for nearly 20 years. This arose from the need to extend the managerial remit to those activities that fall outside the construction phase to include areas such as financing, design and hand-over. The programme is therefore tailored for construction professionals looking for a more holistic perspective of construction project processes and the challenge of project management in complex building and infrastructure projects.

Accreditation of the programme is provided by the UK’s Royal Institution of Chartered Surveyors (RICS), the Engineering Council and The Chartered Institute of Building (CIOB).

Core study areas include: Building Information Modelling, Design Management and Sustainability in the Built Environment.

Key facts

- An outstanding place to study. The School of Civil and Building Engineering is ranked 2nd in the UK for Building in the Times Good University Guide 2015
- Research-led teaching from international experts. 75% of the School’s research was rated as world-leading or internationally excellent in the latest Government Research Excellence Framework.
- Fully accredited by the UK's Royal Institution of Chartered Surveyors (RICS), the Engineering Council and The Chartered Institute of Building (CIOB).

See the website http://www.lboro.ac.uk/study/postgraduate/programmes/departments/civil/construction-project-management/

Programme modules

- ICT for Construction Projects
This module introduces managers to a wide range of tools and technologies appropriate for their role and projects. The module covers a range of topics including project information flows, e-business, database technologies, emerging technologies, building information modelling technologies, groupware and collaborative systems.

- Research and Communication
The aims of this module are to provide the student with an overview of sources of information in construction; to explain to students how to conduct a literature review and introduce students to the principal methods of investigation in construction research; and provide an opportunity for each student to develop professional and academic skills in oral and written communication.

- Principles of Design and Construction
This module teaches students the fundamental principles of managing a project during the design and construction phases. The module develops knowledge and understanding of the role and principles of the estimating, tendering and planning of construction projects and the importance of health and safety in relation to design and construction activities.

- Principles of Project Management
Students will gain an understanding of construction project management principles and theory. Specific areas covered include management responsibility for running construction projects; contemporary issues facing the construction industry; cultural complexity and the impact of behaviour and motivation on performance; and applying appropriate project management techniques for the different project phases.

- Design Management
This module introduces various Design Management techniques and approaches. These include process mapping techniques for design; ways to analyse and optimise the design process; and students will gain an understanding of the internal workings of a design office and their relationship with the construction team.

- Sustainability and the Built Environment
Students will gain an understanding of sustainability issues that relate to the built environment; ways in which these issues can be managed and effective communication of both strategic and technical information.

- Management of Construction Processes
This module introduces students to cutting edge contemporary management concepts and innovations; complexities of setting up and managing logistics on large construction sites; and essential project management techniques such as risk management.

- Postgraduate Research Project
The aim of this module is to provide the student with experience of the process and methodology of research by defining and studying (on an individual basis) a complex problem in a specialised area relating to Construction Project Management.

Option Module (part-time students only)
- Management and Professional Development 1
The aim of this module is to enable students to plan, develop and demonstrate progress against a suitable professional development framework, such that they become equipped with a range of transferable management and professional development skills.

Option Modules One
Choose one from
- Strategic Management in Construction
The aim of this module is to introduce students to the fundamental concepts of strategic management and the tools for formulating and implementing strategies within the construction sector. The application of strategic management tools to develop appropriate change strategies will be explored and fundamental skills in communication, negotiation and leadership will be developed.

- People and Teams
Students will gain a knowledge and understanding of the key fundamental management principles and theory (such as motivation, teamwork, leadership, task management) and how they can be applied to managing people within the context of the construction project environment. Students will also be able to analyse current theoretical approaches to people management, appreciate importance of ethics and cultural issues and evaluate the key factors driving HRM systems.

- Procurement and Contract Procedure
This module aims to develop students understanding of procurement methods, different forms of contract and contract practice. The module is designed to give students key practical skills including advising clients on appropriate procurement and tendering methods; selecting the most appropriate form of construction contract; and manage a construction contract effectively.

- Business Economics and Finance
Students will gain a sound understanding of macro, meso and micro economics and types, sources and management of finance relating to construction organisations and projects. This will allow students to analyse the policies and operations of construction organisations and projects from an economic perspective to determine likely performance consequences and analyse corporate financial data for investment prospects and business management decisions.

- Federated 3D Building Information Modelling (BIM)
The creation, deployment and use of aggregated and integrated models are key goals of collaboration through BIM. This module aims to deliver hands-on practical skills on the use of BIM technologies (i.e. design software and collaboration tools) for real-time co-creation and data sharing of federated/aggregated 3D BIM models. The concept of shared situational awareness within design teams/processes will be explored.

Careers and further study

Previous students have gone on to work for a variety of organisations nationally and internationally. These include Arup, Atkins, BAM Nuttall Ltd, Balfour Beatty, Kier Group, Morgan Sindall, Skanska and Transport for London. Many of these organisations engage with the University in both collaborative research and in delivering lectures on the courses. This provides an ideal opportunity for students to engage in discussions about employment opportunities.

Scholarships and bursaries

The University offers over 100 scholarships each year to new self-financing full-time international students who are permanently resident in a county outside the European Union. These Scholarships are to the value of 25% of the programme tuition fee and that value will be credited to the student’s tuition fee account.
You can apply for a scholarship once you have received an offer for a place on this programme.

Accreditation

This degree is accredited as meeting the requirements for further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) undergraduate first degree.
The course is also accredited by the UK's Royal Institution of Chartered Surveyors (RICS), the Engineering Council and The Chartered Institute of Building (CIOB).

Why choose civil engineering at Loughborough?

As one of four Royal Academy of Engineering designated Centres of Excellence in Sustainable Building Design, the School of Civil and Building Engineering is one of the largest of its type in the UK and holds together a thriving community of over 60 academic staff, 40 technical and clerical support staff and over 240 active researchers that include Fellows, Associates, Assistants, Engineers and Doctoral Students.

Our world-class teaching and research are integrated to support the technical and commercial needs of both industry and society. A key part of our ethos is our extensive links with industry resulting in our graduates being extremely sought after by industry and commerce world-wide,

- Postgraduate programmes
The School offers a focussed suite of post graduate programmes aligned to meet the needs of industry and fully accredited by the relevant professional institutions. Consequently, our record of graduate employment is second to none. Our programmes also have a long track record of delivering high quality, research-led education. Indeed, some of our programmes have been responding to the needs of industry and producing high quality graduates for over 40 years.

Currently, our suite of Masters programmes seeks to draw upon our cutting edge research and broad base knowledge of within the areas of contemporary construction management, project management, infrastructure management, building engineering, building modelling, building energy demand and waste and water engineering. The programmes are designed to respond to contemporary issues in the field such as sustainable construction, low carbon building, low energy services, project complexity, socio-technical systems and socio-economic concerns.

- Research
Drawing from our excellent record in attracting research funds (currently standing at over £19M), the focal point of the School is innovative, industry-relevant research. This continues to nurture and refresh our long history of working closely with industrial partners on novel collaborative research and informs our ongoing innovative teaching and extensive enterprise activities. This is further complemented by our outstanding record of doctoral supervision which has provided, on average, a PhD graduate from the School every two weeks.

- Career Prospects
Independent surveys continue to show that industry has the highest regard for our graduates. Over 90% were in employment and/or further study six months after graduating. Recent independent surveys of major employers have also consistently rated the School at the top nationally for civil engineering and construction graduates.

Find out how to apply here http://www.lboro.ac.uk/study/postgraduate/programmes/departments/civil/construction-project-management/

Read less
Are you keen to develop your existing engineering skills and knowledge to master’s level?. The MSc Engineering Management course has been specifically designed to allow you to update, extend and deepen your understanding of engineering and management. Read more
Are you keen to develop your existing engineering skills and knowledge to master’s level?

The MSc Engineering Management course has been specifically designed to allow you to update, extend and deepen your understanding of engineering and management.

You will build on your current knowledge of subjects such as solid modelling and prototyping, computer aided design and engineering data analysis, whilst developing management and entrepreneurial skills that will enhance your career opportunities within engineering and the broader business environment.

In the second year, for one semester, you’ll undertake an internship, study in another country or join a research group. This valuable experience will enhance your employability and further develop your theoretical and practical skills.

Internship

This option offers the opportunity to spend three months working full-time in one of the many companies/industries with which we have close links. You may be able to extend this over more than one semester in cases where it is adjacent to a vacation period. We will endeavour to help those who prefer this option to find and secure a suitable position but ultimately we are in the hands of the employers who are free to decide who they take into their organisation.

Research

If you take this option, you will be assigned to our Engineering, Physics and Materials Research Group. There is every possibility that you may contribute to published research and therefore you may be named as part of the research team, which would be a great start to a research career.

Study Abroad

We have exchange agreements with universities all over the world, including partners in Europe, Asia, the Americas and Oceania. If you take the Study Abroad option you will spend a semester at one of these partners, continuing your studies in English but in a new cultural and learning environment. Please note that this option may require you to obtain a visa for study in the other country.

With the increasing complexity of the engineering sector there is a requirement for engineering managers to be specialised not just in engineering, but also in wider business and management. This course has been specifically designed to meet the demands of today’s employers and provide a solid foundation for you to progress to management level.

Learn From The Best

You’ll be taught by tutors who have many years of experience in the various aspects of the engineering industry. Their experience, combined with their on-going active research, will provide an excellent foundation for your learning.

The quality of their research has put Northumbria University among the UK’s top 25% of universities for the percentage of research outputs in engineering that are ranked as world-leading or internationally excellent. (Research Excellence Framework 2014.)

Our reputation for quality is reflected by the range and depth of our collaborations with industry partners. We’ve built up numerous industrial links during the 50+ years that we’ve been offering engineering courses. These links help ensure high quality placements and collaborative projects.

Northumbria has the advantage of being located in the North East of England, which is a centre of manufacturing and technical innovation. As well as Nissan, the region’s #1 company, there is a strong concentration of automotive, engineering, chemicals, construction and manufacturing companies.

Teaching And Assessment

The structure of this course has been designed to focus on engineering issues and processes, and how they apply to those in management positions.

This course incorporates six taught modules: research methods, project, programme and portfolio management; project change, risk and opportunities management; technology entrepreneurship and product development; engineering management data analysis and sustainable development for engineering practitioners.

Throughout the duration of this course you will build core skills in key areas such as management, business, finance and computing, providing you with a strong understanding of the day-to-day processes that underpin the smooth running of a successful organisation.

This course is primarily delivered by lectures and supporting seminars such as guided laboratory workshops or staffed tutorials. Assessments are undertaken in the form of exams, assignments, technical reports, presentations and project work. The Advanced Practice semester will be assessed via a report and presentation about your internship, study abroad or research group activities.

On completion of all taught modules you will undertake a substantial piece of research around a subject of particular interest to you and your own career aspirations.

Module Overview
Year One
KB7030 - Research Methods (Core, 20 Credits)
KB7031 - Project, Programme and Portfolio Management (Core, 20 Credits)
KB7033 - Project change, risk and opportunities management (Core, 20 Credits)
KB7040 - Sustainable Development for Engineering Practitioners (Core, 20 Credits)
KB7044 - Engineering Management Data Analysis (Core, 20 Credits)
KB7046 - Technology Entrepreneurship & Product Development (Core, 20 Credits)

Year Two
KB7052 - Research Project (Core, 60 Credits)
KF7005 - Engineering and Environment Advanced Practice (Core, 60 Credits)

Learning Environment

Throughout the duration of your course you will have access to our dedicated engineering laboratories that are continuously updated to reflect real-time industry practice.

Our facilities include mechanical and energy systems experimentation labs, rapid product development and performance analysis, materials testing and characterisation, 3D digital design and manufacturing process performance.

You will be given the opportunity to get hands-on with testing, materials processing, moulding, thermal analysis and 3D rapid manufacture to help you create the products and systems required for the projects you will work on during your course.

Your learning journey will also be supported by technology such as discussion boards and video tutorials. You will also participate in IT workshops where you will learn how to use the latest industry-standard software.

Videos of lectures will on many occasions be made available through Panopto video software to further support teaching delivery.

You will also have access to all Northumbria University’s state-of-the-art general learning facilities such as dedicated IT suites and learning areas.

Research-Rich Learning

When studying at Northumbria University you will be taught by out team of specialist staff who boast a wealth of multi-dimensional expertise. The programme is designed to be research-led, delivering up-do-date teaching that is often based on current research undertaken by our team.

Our teaching team incorporates a dynamic mix of research-active industrial practitioners, renowned researchers and technologists, whose combined knowledge ensures you leave with an in-depth understanding of key engineering management practice and research.

You will be encouraged to undertake your own research–based learning, where you will evaluate and critique scientific papers and write research-based reports based on the information gathered.

The department of Mechanical and Construction Engineering is a top-35 Engineering research department with 79% of our outputs ranked world-leading or internationally excellent according to the latest UK-wide research assessment exercise (REF2014, UoA15). This places us in the top quartile for world-leading publications among UK universities in general engineering.

Give Your Career An Edge

With the increasing complexity of the engineering industry there is a requirement for managers to be specialised not just in engineering, but also the general business and management aspects of a company.

This course has been specifically designed to allow you to update, extend and deepen your knowledge to further enhance your career opportunities in both industry and entrepreneurship.

The MSc Engineering Management course will equip you with skills, tools, techniques and methods that are applicable to engineering companies and many other businesses in the UK and abroad.

The Advanced Practice semester will help you develop a track record of achievement that will help you stand out from other job applicants.

A two-year master’s course, like this one, will carry particular weight with employers. They’ll understand that you’ll have a deeper understanding of topics as well as more hands-on practical experience.

On completion of this course you will possess a deep understanding of engineering data analysis, research and project management, programme and portfolio management, project risk management and technology entrepreneurship.

Industry practice and subject benchmarking have strongly influenced the design of this course to ensure you will leave equipped with the skills that are required by today’s employers.

Your Future

The broad range of subjects covered on this course will prepare you for an array of careers within the engineering sector or a general business environment.

You may decide to pursue a career within general engineering, or a more specialised engineering sector.

This course emphasises entrepreneurship and enterprise, developing and enhancing the management and strategic skills that will prepare you for running your own business, should this be your aspiration. These core business skills will also prepare you for management jobs within engineering or another sector.

This course also sets a solid foundation for those wishing to pursue further study or a career within research or teaching.

Read less
The MSc Project Management degree is fully accredited by the APM and PMI and can be studied full time or online. Read more
The MSc Project Management degree is fully accredited by the APM and PMI and can be studied full time or online.

This reflects the quality of the structure and content in the course which is transferable to a variety of industries including oil and gas, engineering, construction, information technology, healthcare, and many other industries.

The Project Management MSc is suitable for those already in the profession as well as those at the start of their career. It is also suitable for those who are aspiring for career change and development. It can be studied either full-time or online.

Delivering a world class Project Management learning experience in conjunction with diverse industry practitioners and professional bodies to develop emerging and career driven individuals seeking to manage a variety of projects.

Visit the website https://www.rgu.ac.uk/business-management-and-accounting/study-options/postgraduate-taught-full-time/project-management

Stage 1

•Project Management Fundamentals
•Project Information, Organisation and Behaviour
•Project Planning and Control
•Project Commercial Integrity

Exit Award: PgCert Project Management

Stage 2

•Safety, Health, Environmental and Risk Management
•Project Strategy, Leadership and Governance
•Project Management Body of Knowledge

•Plus 1 * module from:

•Quality and Environmental Management Systems
•Supply Chain Management
•Oil & Gas Management
•Performance, Planning and Decision Making
•Leadership And Strategic Management

Exit Award: PgDiploma Project Management

Stage 3 (MSc Full Time On Campus Mode)

•Project Management Consultancy Project and Portfolio Development
•Research Project

Stage 3 (MSc Part Time by Distance Learning Mode)

•Project Management Dissertation

Award: MSc Project Management

* Elective modules will only run where there are sufficient numbers.

Full-time Study

In full time mode, you will learn through a combination of lectures, seminars and workshop sessions. These comprise of a mix of group study, discussion, simulation and presentations of findings by teams and individuals. You will work as an individual and also as part of a team on case studies, team activities, presentations and discussions.

Access to our virtual learning environment, CampusMoodle, is also provided giving you access from home to learning materials (including videos, e-books and journals).

Distance Learning

Our supported distance learning mode of delivery allows you to study online from any location and is designed to fit in around your work commitments. You will be taught and supported by experienced industry professionals who will recreate the same challenging interactive format of the on-campus courses for those studying at a distance.

Our virtual learning environment, CampusMoodle offers students flexibility of where and when they can study, offering full and open access to tutors and other class members. Students have the benefit of being part of a group of learners with the invaluable opportunity to participate in active, group-related learning within a supportive online community setting. The online campus provides students with course materials and depending on the course it also includes:

•Virtual tutorials
•Live chat
•Discussion forums - student and tutor led
•Up-to-date web technology for delivery methods
•User friendly material
•Access to our online library

As online learners, students are part of a 'virtual cohort' and the communication and interaction amongst members of the cohort is a significant aspect of the learning process.

Consultancy Project (full-time only)

For full-time students, there is a consultancy project opportunity which will help you gain valuable experience in real-life project management. The consultancy project will normally last between 6-8 weeks and run during the final semester, July to September.

Your consultancy project will enable you to put into practice and apply the knowledge you have gained during the course. Our students have found this aspect of the course to be an invaluable networking opportunity, allowing them to build and extend upon their theoretical knowledge by gaining an understanding of client expectations. You should use the opportunity to make business contacts for networking in your future and career.

Accreditation

Our highly innovative degree was the first in the UK to receive full accreditation by the Association for Project Management. We are one of institutions spanning globally to be accredited by the Project Management Institute (PMI) Global Accreditation Centre for Project Management Education Programs (GAC), and the first UK University to achieve this overall. This stamp of quality ensures high standards of excellence and relevance and so you can be confidence about gaining a recognised qualification which will truly enhance your professional and personal development.

Graduates of GAC accredited programmes are awarded 1,500 hours of project management experience which counts towards those required to achieve the PMI Project Management Professional (PMP) and Program Management Professional (PgMP) credentials. The GAC is a member of the Association of Specialised and Professional Accreditors (ASPA), the unified, national voice supporting professional education.

Aberdeen Business School itself is also recognised by the Project Management Institute (PMI) as a Global Registered Education Provider. Registered Education Providers (R.E.P.) are those organisations who are approved by PMI to offer project management training for Professional Development Units (PDU).

You will have the opportunity to take up membership with the APM and PMI during your studies and this can provide excellent networking and career opportunities.

Upon successful completion of the Professional Body of Knowledge in Project Management module, you will be equipped with the knowledge and expertise to go on and complete the professional exams. Our staff are able to provide information and advice about these exams.

Careers

You will have the opportunity to take up membership with the APM and PMI during your studies and this can provide excellent networking and career opportunities.

Our strong links with industry enable us to implement practical and innovative delivery, offering students an exceptional learning experience. Course content is relevant to industry needs and our project management graduates are effectively prepared for the workplace. Our reputation is built on providing employers with professional individuals who have a relevant and transferable skill set.

Our graduates have gone on to successful careers a variety of industry sectors. These include oil and gas, energy, engineering, built environment, construction, education, film, research and development, local government and financial services. Some of the roles they have gone into are -
• project engineer
• quality manager
• finance manager
• web design manager
• contracting manager
• procurement/purchasing manager
• project/programme coordinator

How to apply

To find out how to apply, use the following link: http://www.rgu.ac.uk/applyonline

Funding

For information on funding, including loans, scholarships and Disabled Students Allowance (DSA) please click the following link: http://www.rgu.ac.uk/future-students/finance-and-scholarships/financial-support/uk-students/postgraduate-students/postgraduate-students/

Read less
The Masters in Mechanical Engineering & Management offers you the opportunity to develop the knowledge and skills needed for modern engineering or technology management. Read more

The Masters in Mechanical Engineering & Management offers you the opportunity to develop the knowledge and skills needed for modern engineering or technology management. The programme content includes design engineering and other mechanical engineering disciplines.

Why this programme

  • The University of Glasgow’s School of Engineering has been delivering engineering education and research for more than 150 years and is the oldest School of Engineering in the UK.
  • You will be taught jointly by staff from the School of Engineering and the Adam Smith Business School. You will benefit from their combined resources and expertise and from an industry-focused curriculum.
  • Mechanical Engineering is a core engineering discipline that has a long history in the University of Glasgow, dating back to the 1760’s and includes famous people as James Watt.
  • If you have a mechanical engineering background, but with little management experience and are wanting to develop your knowledge of management while also furthering your knowledge of mechanical engineering, this programme is designed for you.
  • You will learn to understand management principles and practices in an engineering environment, evaluate engineering information, and apply business and management tools. You will combine engineering and management knowledge and skills in projects and problem solving.
  • The programme is split into two semesters and a summer session. One semester will be based in the Adam Smith Business School and is aimed at developing knowledge and skills of management principles and techniques. An applied approach is adopted, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.
  • During the other semester there will be a combination of compulsory and optional courses that will combine to provide the required credits in Mechanical Engineering.
  • In the summer session, a project will be undertaken by MSc students. The topic of the project can be either in Management, or Mechanical Engineering, in which case the topic will usually be closely allied with the research interests of the Discipline.
  • This programme has a September and January intake.

Aims of the programme:

  • To understand management principles and practices in an engineering environment.
  • To evaluate engineering information, and subsequent application of business and management.
  • To combine engineering and management knowledge and skills in projects and problem solving.

Programme structure

There are two semesters of taught material and a summer session working on a project or dissertation for MSc students. September entry students start with management courses and January entry students with engineering courses.

Semester 1   

You will be based in the Business School, developing knowledge and skills in management principles and techniques. We offer an applied approach, with an emphasis on an informed critical evaluation of information, and the subsequent application of concepts and tools to the core areas of business and management.

Core courses

  • Contemporary issues in human resource management 
  • Managing creativity and innovation 
  • Managing innovative change 
  • Marketing management 
  • Operations management 
  • Project management.

Semester 2

You will study engineering courses, which aim to enhance your group working and project management capability at the same time as improving your depth of knowledge in chosen mechanical engineering subjects.

Core course

  • Integrated systems design project.

Optional courses

  • Desalination technology
  • Dynamics
  • Materials engineering
  • Vibration.

Project or dissertation

You will undertake an individual project or dissertation work in the summer period (May–August). This will give you an opportunity to apply and consolidate the course material and enhance your ability to do independent work, as well as present results in the most appropriate format. Project and dissertation options are closely linked to staff research interests. September entry students have a choice of management dissertation topics in addition to mechanical engineering projects, and January entry students have a choice of mechanical engineering projects.

Career prospects

Career opportunities include positions in project management, engineering design, materials & mechanics, dynamics, control and desalination technology.

Graduates of this programme have gone on to positions such as:

Technology Engineer at Procter and Gamble

Quality Engineer at Worcester Bosch.



Read less
Engineers are the key to the development of society and solving the problems the world currently faces. They have the power to make the world fundamentally different. Read more
Engineers are the key to the development of society and solving the problems the world currently faces. They have the power to make the world fundamentally different.

The Master of Advanced Engineering is the key transitional stage in your career, transforming you into a global leader. Gain a depth of knowledge, mastering the crucial skills to become a leading contributor in your field.

Customise your degree - the Master of Advanced Engineering offers flexibility to complete your Master degree in just one year, or you can choose a two year option.

This course is designed to extend your knowledge in your chosen specialisation area and advance your leadership and complex problem-solving skills in a cross cultural environment.

Understand, reflect critically upon and apply methods in at least one specialist engineering area to design solutions to complex, multifaceted engineering problems.

Common core units will develop crucial skills in areas such as data analysis and entrepreneurship, translating theory into engineering practice. In discipline core units you will identify, interpret and critically appraise current developments and technologies within your specialisation.

Enhancement units are designed to provide breadth and are taken from either another engineering specialisation or in complementary areas such as information technology and business.

In addition, the two year version of the program offers a range of technical electives that will deepen your understanding of a specific topic, and two, year- long engineering project units. You will work closely with an academic on a topic of your choice and immerse yourself in a multidisciplinary design project.

The Master of Advanced Engineering could also be your stepping stone to a research degree. All of this in highly interactive, expert led classes.

Visit the website http://www.study.monash/courses/find-a-course/2016/advanced-engineering-e6001?domestic=true

Overview

Please select a specialisation for more details:

Chemical engineering

Your qualification will be a Master of Advanced Chemical Engineering

Please note that this specialisation is available only in Clayton.

The Master of Advanced Chemical Engineering allows you to engage in the areas of study including advanced reaction engineering, process design and optimization, conversion of bioresources into fuel, materials and specialty chemicals, and nanostructured membranes for sustainable separations and energy production with an emphasis on the latest developments in the field. In this course, you will develop specialised knowledge and skills that are important to Chemical Engineers in industry and research. This course provides graduates with enhanced opportunities for advancement in their careers.

Civil engineering (Infrastructure systems)

Your qualification will be a Master of Advanced Civil Engineering (Infrastructure Systems)

The Master of Advanced Civil Engineering (Infrastructure Systems) will equip graduates to work with in the area of infrastructure engineering and management. It will provide the fundamental knowledge associated with interfacing both structural and geotechnical designs for infrastructure systems. The program is designed to equip you with advanced skills necessary for managing the challenges posed by ageing and leading designs of new complex infrastructure systems. The course is suitable for new graduates, professionals and managers who are keen to upgrade their existing design and management skills, as well as to develop theoretical and applied knowledge in the area of infrastructure engineering and management.

Civil engineering (Transport)

Your qualification will be a Master of Advanced Civil Engineering (Transport)

Please note that this specialisation is available only in Clayton.

The Master of Advanced Civil Engineering (Transport) program deals with the fundamental knowledge associated with transport engineering and management, traffic engineering, intelligent transport systems and transport planning. The program in is a response to the growing need for engineers with broad awareness of the characteristics and significance of transport, including its technological, economic and social impact. At the same time, the program outlines the state-of-the-art of transport engineering, as it may be applied to the solution of real problems in the planning, design, management and operation of transport facilities. The course is suitable for new graduates, professionals and managers who are keen to upgrade their existing design and management skills as well as to develop theoretical and applied knowledge in the area of transport engineering and management.

Civil engineering (Water)

Your qualification will be a Master of Advanced Civil Engineering (Water)

Please note that this specialisation is available only in Clayton.

The Master of Advanced Civil Engineering (Water) allows you to major in water resources engineering and management. This program deals with the fundamental knowledge associated with surface and ground water flow, stormwater management, water quality, flood forecasting and mitigation. The program is designed to equip you with advanced skills necessary for managing the challenges posed by changing climatic condition on water resource management. The course is suitable for new graduates, professionals and managers who are keen to upgrade their existing design and management skills as well as to develop theoretical and applied knowledge in the area of water resources engineering and management.

Electrical engineering

Your qualification will be a Master of Advanced Electrical Engineering

Please note that this specialisation is available only in Clayton.

The Master of Advanced Electrical Engineering will give you a broad introduction to advanced techniques in signal processing, communications, digital systems and electronics. The units have been chosen around the common theme of embedded systems: special purpose computing systems designed for specific applications. They are found just about everywhere including in consumer electronics, transportation systems, medical equipment and sensor networks. The course will mix theory and practice and will contain a significant amount of hands-on learning in laboratories and team-based design projects.

Energy and sustainability engineering

Your qualification will be a Master of Advanced Engineering (Energy and Sustainability)

Please note that this specialisation is available only in Malaysia.

The Master of Advanced Engineering (Energy and Sustainability) is designed for qualified engineers keen to deepen their knowledge in the energy and sustainability area. The course provides foundations in general engineering through engineering analysis and entrepreneurship units. Students can major in this program by examining energy and sustainability area from a multi-disciplinary perspective. Students can also choose elective units such as environment and air pollution control and smart grids to further enhance their knowledge in this area or undertake a minor research work to pursue a topic of interest related to this area.

Materials engineering

Your qualification will be a Master of Advanced Materials Engineering

Please note that this specialisation is available only in Clayton.

The Master of Advanced Materials Engineering encompasses practical aspects of the key classes of materials such as metals, polymers, biomaterials, nanomaterials and energy-related materials. This program particularly focuses on the most up-to-date aspects of the field, along with the utilisation of materials and their electronic, chemical and mechanical properties as underpinned by the microstructures that are revealed by modern characterisation techniques. This program is designed to prepare students to appreciate and exploit the central role of materials in addressing the present technical, economic and environmental problems involved in the design and construction of engineering structures, processes and devices. This course is ideally suited for new graduates as well as professional engineers who are eager to advance their applied knowledge in the area of Materials Engineering.

Mechanical engineering

Your qualification will be a Master of Advanced Mechanical Engineering

Please note that this specialisation is available only in Clayton.

Most modern engineering projects are multidisciplinary in nature and require a broad range of skills, proficiencies and perspectives to accomplish the task. The Master of Advanced Mechanical Engineering takes a systems approach to the design, monitoring and performance of complex mechanical engineering systems in the fields of renewable energy, aerospace, buildings, transportation, and biomedical devices. The systems approach also permeates the design of the course: four discipline-based core units are vertically integrated so that common problems are examined from different perspectives, culminating in a sustainable systems unit.

For more information visit the faculty website - http://www.study.monash/media/links/faculty-websites/engineering

Find out how to apply here - http://www.study.monash/courses/find-a-course/2016/advanced-engineering-e6001?domestic=true#making-the-application

Read less
The complex challenges faced in modern engineering have created a growing need for highly motivated graduates who understand project infrastructure planning, construction, management and maintenance issues. Read more

About the course

The complex challenges faced in modern engineering have created a growing need for highly motivated graduates who understand project infrastructure planning, construction, management and maintenance issues.

This MSc course equips you with the knowledge, creativity and transferable skills required by project managers in the industry – developing your independent learning abilities and providing a foundation for your ongoing professional development.

You will learn current theories and practices for managing contemporary engineering projects from inception to completion – and for maintaining the resulting infrastructure throughout its lifetime.

Aims

Engineering is at the core of a successful economy and the infrastructure it develops directly affects the wellbeing of its citizens and the environment. Skilled, qualified project managers have a key role in this vital work.

There are two main challenges facing the engineering and construction industry:

1. Clients are increasingly requiring contractors to deliver projects using limited resources, at low cost, in short duration and to a high level of quality and safety
2. Much existing infrastructure is under severe strain due to a legacy of inadequate maintenance and rapid population growth.

The course examines these commercial pressures and will provide opportunities for students to develop and demonstrate knowledge and understanding of:

- The principles of strategic planning and risk analysis in successful project and infrastructure management
- The theoretical basis for the organisation of project infrastructure development and how management of budgets, human resources and supply chains can affect overall project success
- The interplay between engineering project, infrastructure management and sustainability in the complex real-world situations.

The programme develops students' technical knowledge and transferable skills sought by employers, equipping them with the compulsory attributes to flourish in senior roles within the engineering and construction sector.

Course Content

The taught element of the course includes eight modules which approximates to 150 learning hours. For full-time mode of study, the programme is taken over 12 months. The eight modules will be taught over the first eight months (from October to May) and during the final four months (June to September), students will undertake a project dissertation.

The individual project gives you the opportunity to undertake original research in the field of engineering project and infrastructure management. The preparatory work for the project is undertaken together with the taught modules over the first two semesters, under a research methods module, whilst the summer period is being devoted to the actual project dissertation.

Typical Modules:

Sustainable Project Management
Quality Management and Reliability
Financial Management Risk and Financial Management
Managing People and Organisation
Infrastructure Management
Procurement and Contract Management
Geo-Environmental Management for Civil Engineers
Research Methods and Professional Development
Project Dissertation

Teaching

Formal lectures are used to deliver course materials and are supported by structured seminars and problem solving sessions to develop your knowledge and cognitive skills. The lectures give a broad overview of the main concepts and principles you need to understand, providing you with a framework on which to build and expand your knowledge on through private studies.

The application of theory and strengthening of knowledge of taught material is achieved through computing sessions, field trips and group projects. The latter is aimed particularly at enhancing your teamwork skills.

Our well resourced computing laboratories allow you to develop your knowledge and experience of appropriate planning and management software packages - and to apply this to project and infrastructure management problems. You also have access to computers outside scheduled laboratory sessions to allow you to learn at your own pace and time.

Learning from real-world examples forms a significant part of the course. You will visit project sites to understand the challenges and solutions of modern engineering projects.

Our staff are active in research and maintain close contact with industry to ensure that course materials are up-to date with commercial needs. We also invite leading industry figures to the University as guest speakers.

You will also be allocated a personal tutor who will be available to provide academic and pastoral support during the whole duration of your course.

Assessment

Each of the taught modules is assessed either by formal examination, an assignment, or a balanced combination of the two. Methods of assessing assignments include essay, individual/group report, oral presentation and short test.

Information on assignments in terms of the aims, learning outcomes, assessment criteria and submissions requirements are clearly specified at the beginning of the academic year. Detailed feedback on assignment is provided to students to assist them in achieving the required learning outcomes.

The research project is assessed by dissertation and oral presentation. You will be assigned to a project supervisor who will provide you with a one-to-one supervision on your work. The research project gives you the opportunity to take what you have learnt and to explore and develop specific interests by applying it to your own piece of research, which makes it possibly the most fulfilling aspect of the course.

Special Features

This MSc programme has been specially designed to develop graduates and practising engineers and position them at the forefront of managing and leading these developments.

The course explores very current, 21st century issues around risk management, planning and programming, cost control, people and information management, contract/procurement management and sustainability. We receive input for the course from industrial partners and students get to understand project management at work through site visits.

Modules on project finance, risk, procurement and contract management, supply chain strategy, will underpin modules focusing on sustainable project, infrastructure and environmental management.

Students’ skills in gathering and understanding complex information from a variety of sources (including engineering, scientific and socio-economic information) will be developed in a module on advanced research methods. Issues relating to risk and health and safety will be developed in more specialist modules.

Women in Engineering and Computing Programme

Brunel’s Women in Engineering and Computing mentoring scheme provides our female students with invaluable help and support from their industry mentors.

Accreditation

This course has been designed in close consultation with industry and is accredited as a designated technical MSc degree by the Joint Board of Moderators (JBM) for entry years 2015 to 2017. The JBM is made up of Institution of Civil Engineers, the Institution of Structural Engineers, the Chartered Institution of Highways and Transportation, and the Institute of Highway Engineers.

Read less
Are you keen to develop your existing engineering skills and knowledge to master’s level?. The MSc Engineering Management course has been specifically designed to allow you to update, extend and deepen your understanding of engineering and management. Read more
Are you keen to develop your existing engineering skills and knowledge to master’s level?

The MSc Engineering Management course has been specifically designed to allow you to update, extend and deepen your understanding of engineering and management.

You will build on your current knowledge of subjects such as solid modelling and prototyping, computer aided design and engineering data analysis, whilst developing management and entrepreneurial skills that will enhance your career opportunities within engineering and the broader business environment.

With the increasing complexity of the engineering sector there is a requirement for engineering managers to be specialised not just in engineering, but also in wider business and management. This course has been specifically designed to meet the demands of today’s employers and provide a solid foundation for you to progress to management level.

This course can also be started in January - for more information, please view this web-page: https://www.northumbria.ac.uk/study-at-northumbria/courses/engineering-management-msc-ft-dtfegx6/

Learn From The Best

You’ll be taught by tutors who have many years of experience in the various aspects of the engineering industry. Their experience, combined with their on-going active research, will provide an excellent foundation for your learning.

The quality of their research has put Northumbria University among the UK’s top 25% of universities for the percentage of research outputs in engineering that are ranked as world-leading or internationally excellent. (Research Excellence Framework 2014.)

Our reputation for quality is reflected by the range and depth of our collaborations with industry partners. We’ve built up numerous industrial links during the 50+ years that we’ve been offering engineering courses. These links help ensure high quality placements and collaborative projects.

Northumbria has the advantage of being located in the North East of England, which is a centre of manufacturing and technical innovation. As well as Nissan, the region’s #1 company, there is a strong concentration of automotive, engineering, chemicals, construction and manufacturing companies.

Teaching And Assessment

The structure of this course has been designed to focus on engineering issues and processes, and how they apply to those in management positions.

This course incorporates six taught modules: research methods, project, programme and portfolio management; project change, risk and opportunities management; technology entrepreneurship and product development; engineering management data analysis and sustainable development for engineering practitioners.

Throughout the duration of this course you will build core skills in key areas such as management, business, finance and computing, providing you with a strong understanding of the day-to-day processes that underpin the smooth running of a successful organisation.

This course is primarily delivered by lectures and supporting seminars such as guided laboratory workshops or staffed tutorials. Assessments are undertaken in the form of exams, assignments, technical reports, presentations and project work.

On completion of all taught modules you will undertake a substantial piece of research around a subject of particular interest to you and your own career aspirations.

Learning Environment

Throughout the duration of your course you will have access to our dedicated engineering laboratories that are continuously updated to reflect real-time industry practice.

Our facilities include mechanical and energy systems experimentation labs, rapid product development and performance analysis, materials testing and characterisation, 3D digital design and manufacturing process performance.

You will be given the opportunity to get hands-on with testing, materials processing, moulding, thermal analysis and 3D rapid manufacture to help you create the products and systems required for the projects you will work on during your course.

Your learning journey will also be supported by technology such as discussion boards and video tutorials. You will also participate in IT workshops where you will learn how to use the latest industry-standard software.

Videos of lectures will on many occasions be made available through Panopto video software to further support teaching delivery.

You will also have access to all Northumbria University’s state-of-the-art general learning facilities such as dedicated IT suites and learning areas.

Research-Rich Learning

When studying at Northumbria University you will be taught by out team of specialist staff who boast a wealth of multi-dimensional expertise. The programme is designed to be research-led, delivering up-do-date teaching that is often based on current research undertaken by our team.

Our teaching team incorporates a dynamic mix of research-active industrial practitioners, renowned researchers and technologists, whose combined knowledge ensures you leave with an in-depth understanding of key engineering management practice and research.

You will be encouraged to undertake your own research–based learning, where you will evaluate and critique scientific papers and write research-based reports based on the information gathered.

The department of Mechanical and Construction Engineering is a top-35 Engineering research department with 79% of our outputs ranked world-leading or internationally excellent according to the latest UK-wide research assessment exercise (REF2014, UoA15). This places us in the top quartile for world-leading publications among UK universities in general engineering.

Give Your Career An Edge

With the increasing complexity of the engineering industry there is a requirement for managers to be specialised not just in engineering, but also the general business and management aspects of a company.

This course has been specifically designed to allow you to update, extend and deepen your knowledge to further enhance your career opportunities in both industry and entrepreneurship.

The MSc Engineering Management course will equip you with skills, tools, techniques and methods that are applicable to engineering companies and many other businesses in the UK and abroad.

On completion of this course you will possess a deep understanding of engineering data analysis, research and project management, programme and portfolio management, project risk management and technology entrepreneurship.

Industry practice and subject benchmarking have strongly influenced the design of this course to ensure you will leave equipped with the skills that are required by today’s employers.

Your Future

The broad range of subjects covered on this course will prepare you for an array of careers within the engineering sector or a general business environment.

You may decide to pursue a career within general engineering, or a more specialised engineering sector.

This programme emphasises entrepreneurship and enterprise, developing and enhancing the management and strategic skills that will prepare you for running your own business, should this be your aspiration. These core business skills will also prepare you for management jobs within engineering or another sector.

This course also sets a solid foundation for those wishing to pursue further study or a career within research or teaching.

Read less
MSc Engineering Project Management introduces you to the complete project management process; from developing a business case to planning, scheduling and evaluating project outputs. Read more
MSc Engineering Project Management introduces you to the complete project management process; from developing a business case to planning, scheduling and evaluating project outputs. Engineering projects are becoming increasingly complex, being undertaken by multi-disciplinary teams who collaborate to achieve project goals and so often require dedicated and qualified project managers. Project management has become the strategic focus of all successful organisations, and project management skills are considered a valuable attribute by employers.

The course will cover all aspects of engineering project management and is therefore suitable for engineering graduates wishing to develop a career in project management and non-engineers who are expected to manage projects in technology or engineering-related sectors. Individual modules can also be taken by practitioners as part of their CPD.

Block delivery

This course is taught in in block delivery, so you are able to work around existing work commitments. Each module is delivered over a three week period through lectures, tutorials and practical workshops.

Modules

Introduction to project management
Procurement and commercial contract management
Projects, organisation and innovation
Financial management of engineering projects
Quality project management in engineering
Risk management and technology evaluation
Research methods and professional development
MSc engineering project/dissertation

Modules are assessed through a range of exams and course assignments including reports, presentations and individual and group work.

Teaching and learning

•Online course material
•Study block attendance with lectures, tutorials and practical workshops

Academic support is provided through personal tutoring, one-to-one meetings with the course director and e-learning, including the University's moodle software which allows online access to key texts and resources.

Timetable

The taught modules are delivered in three-week blocks. Each module is typically 200 hours of study time. To complete the course in one year you must take four modules each semester.

If you wish to pursue a Master's qualification as part of your CPD you can take up to five years to complete the course.

Employability

This course is tailored towards market trends and demands for increased engineering-specific project management skills. The course would particularly suit:

Engineering graduates wishing to go into project management or as an add-on to their BEng studies;
Engineering practitioners who can undertake the course or individual modules as part of their CPD;
Non-engineers working in relevant sectors who are required to manage engineering projects.
Typical jobs you could expect to go into on graduation include engineering project manager, contracts manager, project planning lead engineer, mechanical engineering project manager, project engineer or engineering team leader.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

• Direct engagement from employers who come in to interview and talk to students
• Job Shop and on-campus recruitment agencies to help your job search
• Mentoring and work shadowing schemes.

Read less
This course provides consultants, operators, regulators and managers with the professional skills and training to contribute to the provision of environmentally sound and economically sustainable systems in the fields of clean water supply, wastewater treatment, and the management of solid waste, including wastes from the oil industry. Read more

This course provides consultants, operators, regulators and managers with the professional skills and training to contribute to the provision of environmentally sound and economically sustainable systems in the fields of clean water supply, wastewater treatment, and the management of solid waste, including wastes from the oil industry.

It is intended for those who find themselves in management positions with little experience of the techniques necessary to manage the range of projects for which they have responsibilities, or people with a background in management who feel they lack up-to-date technical knowledge in the rapidly changing field of environmental engineering.

You’ll build your knowledge of key issues such as water resource, solid waste or health management. Taught by experts in a research-intensive environment, you’ll gain an insight into the latest developments in this exciting field and prepare to meet the challenges they bring.

You’ll study a broad programme informed by an employers’ group and our Industrial Advisory Board, ensuring that we equip you with the skills you need in the modern engineering industry.

You’ll also benefit from using our specialist facilities, such as our public health labs with separate areas for solid waste, water and wastewater, and a class II microbiology lab and clean room. We have all the specialist software you’ll need for your programme, and you’ll have access to a dedicated study suite for Masters students.



Read less
The MSc in Engineering Project Management prepares students for a professional role in the management of engineering projects by providing students with an understanding of both the people-related and technical requirements necessary for the successful management of engineering projects, as well as the organisational and strategic aspects. Read more

The MSc in Engineering Project Management prepares students for a professional role in the management of engineering projects by providing students with an understanding of both the people-related and technical requirements necessary for the successful management of engineering projects, as well as the organisational and strategic aspects. The programme also stresses the processes that are used to produce, process and service engineering-based innovation projects from idea through relevant analyses to launch, relate innovation to improvements in products, processes and competitive advantage and explain how intellectual property is protected and exploited.

This MSc is one of four MSc courses within the Management of Projects Group of Programmes. The other MSc courses are: Management of Projects, Commercial Project Management and Construction Project Management.

The School of Mechanical, Aerospace and Civil Engineering has a long history of delivering project management related masters courses and the staff who deliver the programme are drawn for a wide variety of backgrounds and industrial experience.

Teaching and learning

The Engineering Project Management MSc is a full time course which is studied over 12 months, starting in September each year. The programme comprises eight taught course units, each worth 15 credits, and a research dissertation worth 60 credits. Students study four core units fundamental to project management, and which are shared by students on the other programmes within the group. In addition, the Innovation Management unit is programme specific unit where students will be required to collaborate in a project team to interpret information, make decisions, solve problems and overcome difficulties associated with teamwork and communication when managing an innovation project. Students must also select three option units and carry out an Engineering Project Management based dissertation.

Assessment of the taught part of the programme is via a combination of formal written examinations and coursework assignments, which will include group work and oral presentations. Some assessment is based on online material provided by the Association for Project Management (APM) and PRINCE2 (a process-based method for effective project management).

Disability support

Practical support and advice for current students and applicants is available from the Disability Advisory and Support Service. Email: 

Career opportunities

The MSc Engineering Project Management Programme acquaints students with the basic processes of project management but focuses more specifically on the application of these in an engineering and innovation context. Practical skills in engineering-based innovation projects and protection and exploitation of intellectual property are developed. Successful graduates of this programme find employment in a wide range of organisations such as High Speed Two (HS2) Ltd, Nissan Technical Center South East Asia, Worley Parsons India, Saudi Aramco.

Accrediting organisations

The MSc in Engineering Project Management is listed by the Joint Board of Moderators (JBM) as being Approved Further Learning Schemes for Chartered Engineer. The JBM represents the Institution of Civil Engineers, the Institution of Structural Engineers, the Institution of Highways and Transportation and the Institute of Highway Incorporated Engineers. This means that successful completion of the MSc will enable applicants with an accredited first degree at BEng level to become chartered engineers.

Students who successfully complete the unit MACE 60062 Conflict Management and Dispute Resolution optional unit are eligible for associate membership of the Chartered Institute of Arbitrators.



Read less
This course has been designed in line with the requirements of both the Project Management Institute (PMI) and the Association for Project Management (APM). Read more
This course has been designed in line with the requirements of both the Project Management Institute (PMI) and the Association for Project Management (APM).

Course overview

According to the PMI, project management is one of the fastest growing professions worldwide and the need for project management professionals is growing on every continent. Regardless of where you are from, our MSc in Project Management will equip you with both intellectual and practical skills to allow you to become a project management professional in virtually any field of work.

This course is designed to teach project management to people from any discipline. Unlike many other project management courses, you do not need an engineering or technical background to apply. A large number of our students are from business, arts and other backgrounds.

The course covers a comprehensive range of project management topics, utilising lectures, tutorials and practical sessions. You will also be given the chance to put your newly learnt skills into practice in an extended project management business game over a six-week period.

Various other modules ensure that you will develop a well-rounded set of project and general management skills, including International Project Management, Managing People and Project Leadership, Decision Support for Management and Project Risk and Quality Management. Speakers from outside the University also contribute to the course, providing real-world case studies.

When you have completed the course, you will be ready and confident to take place in the world of work and project management.

Course content

The course combines taught elements with independent projects and self-directed research. There is flexibility to pursue personal interests, with guidance and inspiration from Sunderland's supportive tutors.

Modules on this course include:
-Project Management and Control (30 Credits)
-Commercial and Contractual Issues (15 Credits)
-Research Skills and Academic Literacy (15 Credits)
-Managing People and Project Leadership (15 Credits)
-International Project Management and Practice (15 Credits)
-Decision Support for Management (15 Credits)
-Project Risk and Quality Management (15 Credits)
-Masters Project (60 Credits)

Teaching and assessment

We use a wide variety of teaching and learning methods which include lectures, group work, research, discussion groups, seminars, tutorials and practical laboratory sessions.

Compared to an undergraduate course, you will find that this Masters requires a higher level of independent working. Assessment methods include individual written reports and research papers, practical assignments and the Masters project.

Facilities & location

Sunderland’s outstanding IT facilities include the David Goldman Informatics Centre, which has hundreds of computers so it’s easy to find a free workstation with the software you need. We are an accredited Cisco Academy and have two laboratories packed with Cisco networking equipment including routers, switches, terminals and specialist equipment for simulating frame relay and ISDN links.

We host high-performance computing platforms, including a Big Data machine and a High Performance Computing Cluster system, for concurrent processing of complex computational tasks. We also have the equipment and licences for our own public mobile cellular network.

University Library Services
We’ve got thousands of books and e-books on computing topics, with many more titles available through the inter-library loan service. We also subscribe to a comprehensive range of print and electronic journals so you can access the most reliable and up-to-date academic and industry articles.

Employment & careers

Project managers have skills that are relevant to most industries. The sectors where project managers are most commonly employed include construction, engineering, digital media, IT and telecoms.

Potential roles include:
-Project manager
-Engineering manager
-Digital and print production manager
-IT manager
-Construction manager

Senior and experienced project managers can earn around £60,000, with potential for higher salaries depending on the situation.
A Masters degree will also enhance career opportunities within Higher Education and prepare you for further postgraduate studies.

Read less
The MSc in Commercial Project Management prepares students for a professional role in the management of commercial projects by providing students with an understanding of the both the people-related and technical requirements necessary for the successful management of projects, as well as the organisational and strategic aspects; it also stresses the commercial aspects of project management. Read more

The MSc in Commercial Project Management prepares students for a professional role in the management of commercial projects by providing students with an understanding of the both the people-related and technical requirements necessary for the successful management of projects, as well as the organisational and strategic aspects; it also stresses the commercial aspects of project management: for example, marketing and sales, financial management, procurement, bidding and contract management.

This MSc is one of four MSc courses within the Management of Projects Group of Programmes. The other MSc courses are: Management of Projects, Construction Project Management and Engineering Project Management.

The School of Mechanical, Aerospace and Civil Engineering has a long history of delivering project management related masters courses and the staff who deliver the programme are drawn for a wide variety of backgrounds and industrial experience.

Teaching and learning

The Commercial Project Management MSc is a full time course which is studied over 12 months, starting in September each year. The course comprises eight taught course units, each worth 15 credits, and a research dissertation worth 60 credits. Students on this particular MSc study four core units fundamental to project management, and which are shared by students on the other MSc courses. In addition, students on this course study Contract Management and programme specific unit, Commercial Management, where students work in teams to produce documents related to the buying and selling side of a case study activity. Students must also select two optional units and carry out a Commercial Project Management based dissertation.

Assessment of the taught part of the programme is via a combination of formal written examinations and coursework assignments, which will include group work and oral presentations. Some assessment is based on online material provided by the Association for Project Management (APM) and PRINCE2 (a process-based method for effective project management).

Disability support

Practical support and advice for current students and applicants is available from the Disability Advisory and Support Service. Email: 

Career opportunities

The MSc Commercial Project Management Programme acquaints students with the basic processes of project management but focuses more specifically on the commercial aspects of project management, the establishment of stable, profitable and low-risk exchange relationships for project procurement or sales and the management of the contracts that represent these relationships in a range of project settings. Practical skills in the buy and side project procurement, contract management and conflict and dispute resolution are developed. Successful graduates of this programme find employment in a wide range of commercial-related roles, from forensic delay analysis to quantity surveying to general project management in companies such as Blackrock, Costain, Parsons Brinckerhoff, Yendall Hunter, PwC.

Accrediting organisations

The MSc in Commercial Project Management is listed by the Joint Board of Moderators (JBM) as an Approved Further Learning Schemes for Chartered Engineer. The JBM represents the Institution of Civil Engineers, the Institution of Structural Engineers, the Institution of Highways and Transportation and the Institute of Highway Incorporated Engineers. This means that successful completion of the MSc will enable applicants with an accredited first degree at BEng level, to become chartered engineers.

Students who successfully complete the unit MACE 60062 Conflict Management and Dispute Resolution optional unit are eligible for associate membership of the Chartered Institute of Arbitrators.



Read less
This course has been designed in line with the requirements of both the Project Management Institute (PMI) and the Association for Project Management (APM). Read more
This course has been designed in line with the requirements of both the Project Management Institute (PMI) and the Association for Project Management (APM).

Course overview

This Masters course is based at our quality-assured partners around the world. According to the PMI project management is one of the fastest growing professions worldwide and the need for project management professionals is growing on every continent. Regardless of where you are from, our MSc in Project Management will equip you with both intellectual and practical skills to allow you to become a project management professional in virtually any field of work.

This course is designed to teach project management to people from any discipline. Unlike many other project management courses, you do not need an engineering or technical background to apply. A large number of our students are from business, arts and other backgrounds.

The course covers a comprehensive range of project management topics, utilising lectures, tutorials and practical sessions.
Various other modules ensure that you will develop a well-rounded set of project and general management skills including: International Project Management, Managing People and Project Leadership, Decision Support for Management and Project Risk and Quality Management.

When you have completed the course you will be ready and confident to take your place in the world of work and project management.

Course content

The course combines taught elements with independent projects and self-directed research. There is flexibility to pursue personal interests, with guidance and inspiration from Sunderland's supportive tutors.

Modules on this course include:
-Project Management and Control (30 Credits)
-Commercial and Contractual Issues (15 Credits)
-Research Skills and Academic Literacy (15 Credits)
-Managing People and Project Leadership (15 Credits)
-International Project Management and Practice (15 Credits)
-Decision Support for Management (15 Credits)
-Project Risk and Quality Management (15 Credits)
-Masters Project (60 Credits)

Teaching and assessment

You will learn through a combination of lectures, seminars, tutorials, project work and group work. On all courses you are encouraged to develop as an independent learner. Assessment methods include individual written reports and research papers, practical assignments and the Masters project.

Facilities & location

This course is available at our partner centres in Botswana, Kenya and Sri Lanka.

Employment & careers

Project managers have skills that are relevant to most industries. The sectors where project managers are most commonly employed include construction, engineering, digital media, IT and telecoms.

Potential roles include:
-Project manager
-Engineering manager
-Digital and print production manager
-IT manager
-Construction manager

Senior and experienced project managers can earn around £60,000, with potential for higher salaries depending on the situation. A Masters degree will also enhance career opportunities within Higher Education and prepare you for further postgraduate studies.

Read less
Are you interested in gaining a Masters qualification that is highly valued by employers and applicable to a range of industries? This course will give you project management skills that are widely transferable. Read more
Are you interested in gaining a Masters qualification that is highly valued by employers and applicable to a range of industries? This course will give you project management skills that are widely transferable.

Strong demand for project managers means the average salary for experienced professionals is £62,000 a year, or equivalent.

The course covers topics such as how to assess project feasibility, how to manage risks in projects, how to keep people working together, and how to develop a portfolio of projects. The curriculum is aligned with the academic requirements of the Association for Project Management (APM), which is the UK’s largest professional body for project managers.

The course is also available through part-time and distance learning modes, and with the option of an advanced practice element.

There’s no need to have completed previous studies in project management and we welcome applicants from a variety of academic backgrounds.

This course has several available start dates and study options - for more information, please view the relevant web-page:
18 months full time - https://www.northumbria.ac.uk/study-at-northumbria/courses/project-management-dtfpjz6/

Part time - https://www.northumbria.ac.uk/study-at-northumbria/courses/project-management-msc-pt-dtppjm6/

Distance learning - https://www.northumbria.ac.uk/study-at-northumbria/courses/project-management-dtdpjm6/

Learn From The Best

You’ll be taught by tutors whose wealth of practitioner and research expertise adds to the richness of the delivery of the course. Their expertise, combined with their on-going active research, will provide an excellent foundation for your learning.

The high quality of Northumbria’s research in Information Sciences is shown by the fact that 90% of our research impact has been judged to have very considerable reach and significance (Research Excellence Framework 2014).

Our reputation for quality is reflected by the range and depth of our collaborations with industry partners. These collaborations and links help inform our curriculums and ensure input from practitioners via guest lectures and master classes.

Teaching And Assessment

Our teaching methods include lectures, small group seminars, workshops, master classes and field visits. As this is a Masters course there is a significant element of independent learning and self-motivated reflection.

You’ll undertake a final Masters level research project that will hone your skills in evaluating and applying research techniques and methodologies. The topic of the project will reflect your own unique interests.

Assessments are designed to give feedback as well as to monitor your level of achievement. The assessed projects will enable you to test your skills in ways that relate to current industrial practice. Specific assessment methods include assignments, written reports, exams, group presentations and debates.

Module Overview
KB7030 - Research Methods (Core, 20 Credits)
KB7031 - Project, Programme and Portfolio Management (Core, 20 Credits)
KB7032 - Project Organisations & Information Management (Core, 20 Credits)
KB7033 - Project change, risk and opportunities management (Core, 20 Credits)
KB7036 - People in Project Management (Core, 20 Credits)
KB7037 - Project Feasibility and Economics (Core, 20 Credits)
KB7052 - Research Project (Core, 60 Credits)

Learning Environment

Technology Enhanced Learning (TEL) is embedded throughout the course with tools such as the ‘Blackboard’ eLearning Portal and electronic reading lists that will guide your preparation for seminars and independent research. Our use of lecture capture software will help you revise challenging material. You’ll have access to industry-standard software such as Microsoft Project, Asta Powerproject, IBM SPSS and NVivo.

Our library, which was ranked #2 in the UK in the Times Higher Education Student Experience Survey for 2015, has excellent digital resources with over 100 databases for independent learning as well as half a million electronic books and another 500,000 print books.

To facilitate group projects there are dedicated student working spaces, such as ‘The Hub’, an area that is well equipped for meetings and working with IT. The Zone is another area that’s popular with students undertaking group work or individual study.

Research-Rich Learning

As a Masters student you’ll develop your research skills to a new and higher level. Your research supervisor will support you in your final independent research project, where you choose to produce either a research paper or a dissertation. Your supervisor will provide guidance from its development through to completion.

Northumbria’s strong research ethos is an essential aspect of how you will develop as a critical, reflective and independent thinker. Your project-based learning will benefit from the research activities of the teaching team.

Our specialist interests include information management, process improvement strategies, lean production, project-driven organisations, innovation diffusion, 4D planning and scheduling, and construction project management. Northumbria University is particularly known for working on Building Information Management (BIM).

Give Your Career An Edge

The course meets a particular need for professional training in project management. Many of the modules involve field visits and guest lectures, allowing you to understand the processes being used to manage construction projects and to talk with experienced managers. This will give you extra insights that increase your competitive edge.

The course has the additional benefit of being aligned with the academic requirements of the Association for Project Management (APM). This will make it easier for you to become a full member of the UK’s largest professional body for project managers.

When it comes to applying for jobs, our Careers and Employment Service offers a range of resources as well as support that’s available online and on a one-to-one basis.

Your Future

This course will open up opportunities in project management roles in construction and many other industries. Past graduates have gone on to work for multinational companies such as BAE Systems, Volvo Car Group, NHS, Siemens, IBM, Hewlett-Packard, Shell and Virgin Money. Job roles have included project managers, programme managers, project portfolio managers, management consultants, business developers, entrepreneurs, quality managers and directors.

If you decide to start up your own business, it’s good to know that the combined turnover of our graduates’ start-up companies is higher than that of any other UK university.

The course could also lead you to a postgraduate research degree such as an MPhil, PhD or Professional Doctorate.

Whatever you decide to do, you will have the transferable skills that employers expect from a Masters graduate from Northumbria University. These include the ability to tackle complex issues through conceptualisation and undertaking research, the ability to contribute to new processes and knowledge, and the ability to formulate balanced judgements when considering incomplete or ambiguous data.

Read less

Show 10 15 30 per page



Cookie Policy    X