• University of Glasgow Featured Masters Courses
  • New College of the Humanities Featured Masters Courses
  • University of Derby Online Learning Featured Masters Courses
  • Coventry University Featured Masters Courses
  • St Mary’s University, Twickenham Featured Masters Courses
  • Goldsmiths, University of London Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Cardiff University Featured Masters Courses
Middlesex University Featured Masters Courses
Imperial College London Featured Masters Courses
Institute for Advanced Architecture of Catalonia Featured Masters Courses
Barcelona Executive Business School Featured Masters Courses
Bath Spa University Featured Masters Courses
"bolton"×
0 miles

Masters Degrees (Bolton)

  • "bolton" ×
  • clear all
Showing 1 to 15 of 71
Order by 
This programme is for artists who want to develop their specialist studio practice to a higher level. The course will give you the opportunity to enhance your practical and creative skills as a practicing artist, underpinned by a contextual research-based programme of critical studies. Read more
This programme is for artists who want to develop their specialist studio practice to a higher level.

The course will give you the opportunity to enhance your practical and creative skills as a practicing artist, underpinned by a contextual research-based programme of critical studies. You will be given a personal supervisor at the start of the programme, and you will also work in the studio alongside your fellow MA Fine Art students.

It builds upon the distinctive approach to arts practice currently offered on the undergraduate fine art programme at the University. The course combines the use of established media and techniques with an ethos of open learning and experimentation using new and alternative media.
You will enhance your practice through a critical and contextual understanding of your creative methods, enabling you to develop and broaden your work in the formulation and articulation of your ideas.

Through contacts with external partners and arts-based agencies you will engage directly with the world of contemporary fine art, extending your knowledge of the commercial side of the art world. This aspect of your practice will also be supported by learning business management skills such as creating a business plan and writing proposal briefs for commission, exhibition and project work.

The course is taught by practitioners with extensive experience of creative media and the broader art world. In addition to studio work, (which will take up the bulk of your time here), you will learn through lectures, master classes, field trips, seminars, presentations, group work, tutorials and independent study.

The fine art department has excellent facilities for a variety of creative practices. These include a fully-equipped wood workshop; a fully-equipped metal workshop with facilities to work with a wide variety of metals, including a small aluminium foundry; a printmaking studio; a ceramics and casting studio with two large kilns; and a digital studio equipped with the latest AppleMac computers, a range of high end software and printing facilities up to A1 size.

Special features

The open nature of the fine art studio means you will have the opportunity to apply a multi-disciplinary approach to your work and make use of the high level facilities available within the studio set-up.

The fine art department has established strong links with a number of arts organisations and groups within the region, including Bolton Metropolitan Borough Council, Bolton At Home, Queens Park and Bolton Landscape Department, Bolton Schools Liaison Network, Bolton Museum and Art Gallery, Hospital Arts, and a large number of private organisations who regularly commission our students.

Students from the undergraduate programme have successfully set up three large studio groups in the region and studio spaces are available for students to rent in these studios at very reasonable rates. Two new contemporary art galleries have also been set up by our students in the past three years.

The department has also set up an undergraduate programme in fine art in Athens and students from the programme have an opportunity to spend some time at the art school in the centre of this historic city.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
The Centre for Research for Health and Wellbeing welcomes expressions of interest in postgraduate research degrees in areas of study related to health and wellbeing. Read more
The Centre for Research for Health and Wellbeing welcomes expressions of interest in postgraduate research degrees in areas of study related to health and wellbeing. The centre draws together expertise from across the University within an inter-disciplinary framework, and provides a vibrant and fertile environment for postgraduate research studies. We undertake research, evaluation and needs assessment into service user involvement, participation and innovation, 'hard to reach groups' and service improvement, drawing from areas such as sociology, social policy, leisure studies, nursing, physiotherapy, public health and many more.

We offer a number of research routes for those wishing to increase their research experience and develop their academic and professional profile. These include ‘traditional’ postgraduate programmes such as MPhil and PhD, as well as new routes to PhDs such as our PhD by Practice and PhD by Published Work (prospective and retrospective). We are also in the process of developing a Professional Doctorate in Health Research.

Available projects

Current and recent students include:

Alison – Health Services Management

Alison is an occupational therapist and NHS manager by background. Her research has been funded by a local PCT to develop a working model for world class commissioning. She spends three days a week in the PCT and two days a week in the University developing the academic framework for her studies.

Abdul – Social Policy

Abdul has been exploring questions and issues related to community cohesion. He has worked with members of a local Asian community and explored what some of the buzz-words around community cohesion mean to them. As a local Imam, Abdul is well-connected to the community within which he has undertaken his research and he has been able to gain insights into the experiences of those members of Asian communities that are often excluded from or mistrustful of other research studies.

Bimpe – Health Care

The University, in partnership with NHS Bolton and Bolton Council, is presently building a new Centre for Health and Wellbeing, known as Bolton One. Bolton One will provide a range of services to the people of Bolton, and Bimpe’s research project is focused on how service users’ views can be incorporated into this development. Bimpe has a masters in public health and a strong background of working with local community groups, including those from refugee and asylum seeker communities.

Susan - Physiotherapy

Sue is a clinical lead and consultant physiotherapist and is undertaking a PhD by Practice at the centre. During the course of her career, she has found that physiotherapists encounter patients who have a serious spinal pathology that has previously gone undiagnosed. Sue has worked to develop and identify case material and a schema of ‘red flags’ that can be used by professionals working in clinical settings.

Ana – Occupational Therapy

Ana is an occupational therapist by background and a teacher of ‘circle dance’. She is currently researching methods of meas

Read less
The University of Bolton Professional Graduate Diploma in Education (Level 6 Diploma in Teaching in the Lifelong Learning Sector) is a teacher training… Read more
The University of Bolton Professional Graduate Diploma in Education (Level 6 Diploma in Teaching in the Lifelong Learning Sector) is a teacher training course for graduates who wish to teach in the post-compulsory sector of education; for example, in adult and community education, further education, sixth form colleges, the prison and probation services, pre-employment training and work-based learning. Your choice of study will depend on the subject and area in which you wish to teach. For teaching in a vocational and/or academic curriculum area you will choose the Generic pathway.

For teaching ESOL/literacy or numeracy you will choose the Skills for Life pathway. For teaching learners with additional needs you will choose the Teaching Learners with Additional Needs pathway. You should select your specialist area at the time of your application. The full PGDE awards equate to the DTLLS qualifications.

You may study the Generic pathway at either the University of Bolton or at a partner college. If you wish to study at a partner college, you will need to contact the college directly for timetable information. Full contact details of our partner colleges are available by visiting our 'related links' section and selecting our 'partner colleges' web page. Please note: the Skills for Life pathways are only available for study at the University of Bolton; Bury College offers (ESOL/Literacy specialism route).

The Teaching Learners with Additional Needs pathway is only available at the University of Bolton. As part of your studies you will be required to carry out a teaching placement equivalent to two days a week. This may involve daytime or evening teaching or both. The university or partner college at which you are studying may find your placement for you or it may be possible for you to organise your own placement. If you organise your own placement this must be agreed in advance with your tutor who will need to confirm that the placement is suitable.

For more information pleae visit http://www.bolton.ac.uk/postgrad

Read less
The University of Bolton Professional Diploma in Education (Level 5 Diploma in Teaching in the Lifelong Learning Sector) is a teacher training course for… Read more
The University of Bolton Professional Diploma in Education (Level 5 Diploma in Teaching in the Lifelong Learning Sector) is a teacher training course for non-graduates who wish to teach in the post-compulsory sector of education; for example, in adult and community education, further education, sixth form colleges, universities, the prison and probation services, pre-employment training and work-based learning. Your choice of study will depend on the subject and area in which you wish to teach. For teaching in a vocational and/or academic curriculum area you will choose the Generic pathway.

For teaching ESOL/literacy or numeracy you will choose the Skills for Life pathway. For teaching learners with additional needs you will choose the Teaching Learners with Additional Needs pathway. You should select your specialist area at the time of your application. The full PDE awards equate to the DTLLS qualifications.

You may study the Generic pathway at either the University of Bolton or at a partner college. If you wish to study at a partner college, you will need to contact the college directly for timetable information. Full contact details of our partner colleges are available by visiting our 'related links' section and selecting our 'partner colleges' web page. Please note: the Skills for Life pathways are only available for study at the University of Bolton; Bury College offers (ESOL/Literacy specialism route).

The Teaching Learners with Additional Needs pathway is only available at the University of Bolton. As part of your studies you will be required to carry out a teaching placement equivalent to two days a week. This may involve daytime or evening teaching or both. The university or partner college at which you are studying may find your placement for you or it may be possible for you to organise your own placement. If you organise your own placement this must be agreed in advance with your tutor who will need to confirm that the placement is suitable.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering. Read more
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering.

The 18 month, three semester course can be undertaken as either a single award or a dual award. The single award is studied entirely at the University of Bolton. In the dual award mode, you will normally study at the University of Bolton in semester 1 (October to February) and at South Westphalia University of Applied Sciences, Soest, Germany, in semester 2 (March to July). The third semester (October to February) will be assigned to a project, and this will normally be undertaken at the University of Bolton.

Entry to the course is also available in semester 2 (February) in the case of the dual award scheme, the second semester (to be spent at South Westphalia University of Applied Sciences, Soest Germany) will be undertaken during October to January.

In the dual award mode the successful student will obtain two separate MSc awards, one from each university. In the single award mode the student will receive the award of an MSc from the University of Bolton only.

What you will study

You are required to successfully complete 180 credits of study to gain the MSc. The course comprises eight taught modules, each with a credit value of 15, making a total of 120 taught credits. In each of the two taught semesters, you will study four modules. The third semester is dedicated to a 60 credit individual project. Where possible, the project will involve a work placement or an industrially-related project, based at one of the two universities. During the project phase it is the intention to find, where possible, some form of work experience for all of the students enrolled on the MSc.

Electronic pathway modules
Control Engineering: Intelligent Systems (EEM4010); Advanced Control Technology (EEM4015).

Engineering Management: Business in Engineering (EEM4013); Technical Publications and Presentations (EEM4014); Project Management (EEM4017); Integrated Management (EEM4020).

Electronic Engineering: Microprocessor-based Systems (EEM4016) or Microcontrollers (AMI4655); Signal Processing (EEM4011) or Digital Signal Processing (AMI4622).

Project (EEM5001).

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering. Read more
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering.

The 18 month, three semester course can be undertaken as either a single award or a dual award. The single award is studied entirely at the University of Bolton. In the dual award mode, you will normally study at the University of Bolton in semester 1 (October to February) and at South Westphalia University of Applied Sciences, Soest, Germany, in semester 2 (March to July). The third semester (October to February) will be assigned to a project, and this will normally be undertaken at the University of Bolton.

Entry to the course is also available in semester 2 (February) in the case of the dual award scheme, the second semester (to be spent at South Westphalia University of Applied Sciences, Soest Germany) will be undertaken during October to January.

In the dual award mode the successful student will obtain two separate MSc awards, one from each university. In the single award mode the student will receive the award of an MSc from the University of Bolton only.

What you will study

You are required to successfully complete 180 credits of study to gain the MSc. The course comprises eight taught modules, each with a credit value of 15, making a total of 120 taught credits. In each of the two taught semesters, you will study four modules. The third semester is dedicated to a 60 credit individual project. Where possible, the project will involve a work placement or an industrially-related project, based at one of the two universities. During the project phase it is the intention to find, where possible, some form of work experience for all of the students enrolled on the MSc.

Mechanical pathway modules
Control Engineering: Intelligent Systems (EEM4010); Advanced Control Technology (EEM4015).

Engineering Management: Business in Engineering (EEM4013); Technical Publications and Presentations (EEM4014); Project Management (EEM4017); Integrated Management (EEM4020).

Mechanical Engineering: Monitoring of Mechanical Systems (EEM4018); Advanced Production Engineering (EEM4019).

Project (EEM5001).

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering. Read more
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering.

The 18 month, three semester course can be undertaken as either a single award or a dual award. The single award is studied entirely at the University of Bolton. In the dual award mode, you will normally study at the University of Bolton in semester 1 (October to February) and at South Westphalia University of Applied Sciences, Soest, Germany, in semester 2 (March to July). The third semester (October to February) will be assigned to a project, and this will normally be undertaken at the University of Bolton.

Entry to the course is also available in semester 2 (February) in the case of the dual award scheme, the second semester (to be spent at South Westphalia University of Applied Sciences, Soest Germany) will be undertaken during October to January.

In the dual award mode the successful student will obtain two separate MSc awards, one from each university. In the single award mode the student will receive the award of an MSc from the University of Bolton only.

What you will study

You are required to successfully complete 180 credits of study to gain the MSc. The course comprises eight taught modules, each with a credit value of 15, making a total of 120 taught credits. In each of the two taught semesters, you will study four modules. The third semester is dedicated to a 60 credit individual project. Where possible, the project will involve a work placement or an industrially-related project, based at one of the two universities. During the project phase it is the intention to find, where possible, some form of work experience for all of the students enrolled on the MSc.

Mechanical pathway modules

Control Engineering: Intelligent Systems (EEM4010); Advanced Control Technology (EEM4015).

Engineering Management: Business in Engineering (EEM4013); Technical Publications and Presentations (EEM4014); Project Management (EEM4017); Integrated Management (EEM4020).

Mechanical Engineering: Monitoring of Mechanical Systems (EEM4018); Advanced Production Engineering (EEM4019).

Project (EEM5001).

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering. Read more
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering.

The 18 month, three semester course can be undertaken as either a single award or a dual award. The single award is studied entirely at the University of Bolton. In the dual award mode, you will normally study at the University of Bolton in semester 1 (October to February) and at South Westphalia University of Applied Sciences, Soest, Germany, in semester 2 (March to July). The third semester (October to February) will be assigned to a project, and this will normally be undertaken at the University of Bolton.

Entry to the course is also available in semester 2 (February) in the case of the dual award scheme, the second semester (to be spent at South Westphalia University of Applied Sciences, Soest Germany) will be undertaken during October to January.

In the dual award mode the successful student will obtain two separate MSc awards, one from each university. In the single award mode the student will receive the award of an MSc from the University of Bolton only.

What you will study

You are required to successfully complete 180 credits of study to gain the MSc. The course comprises eight taught modules, each with a credit value of 15, making a total of 120 taught credits. In each of the two taught semesters, you will study four modules. The third semester is dedicated to a 60 credit individual project. Where possible, the project will involve a work placement or an industrially-related project, based at one of the two universities. During the project phase it is the intention to find, where possible, some form of work experience for all of the students enrolled on the MSc.

Mechatronic pathway modules

Control Engineering: Intelligent Systems (EEM4010); Advanced Control Technology (EEM4015).

Engineering Management: Business in Engineering (EEM4013); Technical Publications and Presentations (EEM4014); Project Management (EEM4017); Integrated Management (EEM4020).

Electronic Engineering: Microprocessor-based Systems (EEM4016) or Microcontrollers (AMI4655).

Mechanical Engineering: Advanced Production Engineering (EEM4019).

Project (EEM5001).

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering. Read more
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering.

The 18 month, three semester course can be undertaken as either a single award or a dual award. The single award is studied entirely at the University of Bolton. In the dual award mode, you will normally study at the University of Bolton in semester 1 (October to February) and at South Westphalia University of Applied Sciences, Soest, Germany, in semester 2 (March to July). The third semester (October to February) will be assigned to a project, and this will normally be undertaken at the University of Bolton.

Entry to the course is also available in semester 2 (February) in the case of the dual award scheme, the second semester (to be spent at South Westphalia University of Applied Sciences, Soest Germany) will be undertaken during October to January.

In the dual award mode the successful student will obtain two separate MSc awards, one from each university. In the single award mode the student will receive the award of an MSc from the University of Bolton only.

What you will study

You are required to successfully complete 180 credits of study to gain the MSc. The course comprises eight taught modules, each with a credit value of 15, making a total of 120 taught credits. In each of the two taught semesters, you will study four modules. The third semester is dedicated to a 60 credit individual project. Where possible, the project will involve a work placement or an industrially-related project, based at one of the two universities. During the project phase it is the intention to find, where possible, some form of work experience for all of the students enrolled on the MSc.

Mechatronic pathway modules

Control Engineering: Intelligent Systems (EEM4010); Advanced Control Technology (EEM4015).

Engineering Management: Business in Engineering (EEM4013); Technical Publications and Presentations (EEM4014); Project Management (EEM4017); Integrated Management (EEM4020).

Electronic Engineering: Microprocessor-based Systems (EEM4016) or Microcontrollers (AMI4655).

Mechanical Engineering: Advanced Production Engineering (EEM4019).

Project (EEM5001).

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
The MSc in Renewable Energy Systems and Technologies is a unique course for graduates, scientists and technologists who are either working in a research role within the renewable energy and technologies field or who are looking to begin their career in the sector. Read more
The MSc in Renewable Energy Systems and Technologies is a unique course for graduates, scientists and technologists who are either working in a research role within the renewable energy and technologies field or who are looking to begin their career in the sector.

What you will study

Studying on the course will enhance your range of knowledge and expertise and support your personal and career development. You will examine current issues in global energy, consider energy use in different areas of society and consider possible scenarios for energy consumption in the future. You will develop a full understanding of the key materials used in renewable energy systems, learn about their functionalities and look at processes for the fabrication of energy conversion devices and systems.

You will study the principles of operation, design, performance and installation of the key renewable technologies of solar, wind, biomass, wave and tidal and also consider energy storage options and the environmental and socio-economic effects of these technologies.

You will carry out a personal research project in which you will use your knowledge and skills to carry out a relevant and original study in an area that will be agreed with your course tutor. This research will be carried out either in your workplace or at the University of Bolton.

The course is offered by the University of Bolton’s Institute for Materials Research and Innovation (IMRI).

IMRI is a multidisciplinary centre in which research and innovation is carried out in collaboration with industry and other academic institutions. It is the leader in the UK – and is known internationally – for its research and applications development in the field of applied materials science and engineering.

Teaching for each module is carried out at the University of Bolton and will be delivered as a short course lasting no more than 2 weeks. The rest of your study is very flexible and may be carried out away from the University.

Special features

Teaching for each module is delivered as a short course that will last no more than two weeks. The rest of your study is very flexible and may be carried out away from the University.

Class sizes are small which means you will be able to work closely with your fellow students and your tutor.

Your subject of study and your personal project means you have the opportunity to work in an area that is of personal interest or that is related to your career.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering. Read more
This course focuses on systems engineering and engineering management, and offers three different system engineering pathways, these are electronic, mechanical and mechatronic engineering.

The 18 month, three semester course can be undertaken as either a single award or a dual award. The single award is studied entirely at the University of Bolton. In the dual award mode, you will normally study at the University of Bolton in semester 1 (October to February) and at South Westphalia University of Applied Sciences, Soest, Germany, in semester 2 (March to July). The third semester (October to February) will be assigned to a project, and this will normally be undertaken at the University of Bolton.

Entry to the course is also available in semester 2 (February) in the case of the dual award scheme, the second semester (to be spent at South Westphalia University of Applied Sciences, Soest Germany) will be undertaken during October to January.

In the dual award mode the successful student will obtain two separate MSc awards, one from each university. In the single award mode the student will receive the award of an MSc from the University of Bolton only.

What you will study

You are required to successfully complete 180 credits of study to gain the MSc. The course comprises eight taught modules, each with a credit value of 15, making a total of 120 taught credits. In each of the two taught semesters, you will study four modules. The third semester is dedicated to a 60 credit individual project. Where possible, the project will involve a work placement or an industrially-related project, based at one of the two universities. During the project phase it is the intention to find, where possible, some form of work experience for all of the students enrolled on the MSc.

Electronic pathway modules

Control Engineering: Intelligent Systems (EEM4010); Advanced Control Technology (EEM4015).

Engineering Management: Business in Engineering (EEM4013); Technical Publications and Presentations (EEM4014); Project Management (EEM4017); Integrated Management (EEM4020).

Electronic Engineering: Microprocessor-based Systems (EEM4016) or Microcontrollers (AMI4655); Signal Processing (EEM4011) or Digital Signal Processing (AMI4622).

Project (EEM5001).

Read less
The well-established and challenging MBA programme at the University of Bolton is designed to inspire and support you in the development of your business and managerial skills. Read more
The well-established and challenging MBA programme at the University of Bolton is designed to inspire and support you in the development of your business and managerial skills. It will enhance your awareness of the many different perspectives relating to the study and practice of management.

What the Course offers

The Bolton MBA will give you the knowledge, skills and detailed understanding that will enable you to develop as a bold, creative business leader – and make a positive and valuable contribution to business performance in whatever roles you undertake.

The course is designed to provide a comprehensive grounding in all the key aspects of personal business skills and managerial development. You will be challenged to analyse and examine the business environment and understand different business models. You will also be given the opportunity to apply theoretical concepts to your personal and organisational settings by examining many of the challenges that businesses face on a day-to-day basis.

Whatever industry or business sector you work in, the MBA course will support you in gaining a critical understanding of the challenging business and management concepts and frameworks that will allow you to contribute to business success. You will be provided with the tools to enhance both your professional and managerial capabilities and your life-long career prospects.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
The Postgraduate Diploma (PgDip) in Psychological Studies is a conversion course for graduates who wish to pursue a professional career in psychology; for instance, in educational, occupational or clinical psychology. Read more
The Postgraduate Diploma (PgDip) in Psychological Studies is a conversion course for graduates who wish to pursue a professional career in psychology; for instance, in educational, occupational or clinical psychology. If your first degree was in a different subject, or you hold an honours degree in psychology that did not confer eligibility for the Graduate Basis for Chartership (GBC) of the British Psychological Society (formerly known as the Graduate Basis for Registration or GBR) then this course is for you.

This course has replaced the Graduate Diploma (GradDip) in Psychology previously offered by the University of Bolton.

It is assumed that you will have some knowledge of psychology with a minimum of 60 credits in the subject from your first degree studies. If you do not have 60 credits in psychology you may complete the Graduate Foundation Studies in Psychology course here at the University of Bolton (please follow the link in the 'related courses' section below for details) or complete an equivalent 60 credit course. On completion of the foundation course with an average mark of at least 50% over the three modules you will be eligible to enrol for the PgDip in Psychological Studies.

The course provides a curriculum that covers specifically identified areas in psychology, equivalent to those areas covered in the British Psychological Society‘s qualifying examination in psychology. The modules that you study will give you a strong grounding in core areas of psychology and in research methods, as well as an understanding of the science of psychology.

What you will learn

You will build on your studies at undergraduate level, and where appropriate your previous knowledge of psychology, to develop a strong foundation in understanding the science of psychology. You will learn about the core theories and concepts of psychology that apply to a wide range of human behaviour including language acquisition, learning, personality and relationships and gain an understanding of the philosophical, historical and social issues that have influenced the study and practice of psychology.

You will learn the methods of psychological research, for example collecting and analysing data and you will also be taught key skills such as accessing and evaluating information and effective communication.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
The MSc in Construction Management is a long standing and successful course. It is designed to meet the needs and requirements of managers, engineers, surveyors, designers and others working in construction-related companies. Read more
The MSc in Construction Management is a long standing and successful course. It is designed to meet the needs and requirements of managers, engineers, surveyors, designers and others working in construction-related companies. It aims to give you a competitive edge.

The programme offers close contact with industry and has an emphasis on problem solving. You will learn to use the latest, most appropriate management theory and information technology systems to solve industrial problems.

The University of Bolton’s unique links with business and industry mean that the programme has the backing of employers, and provides management learning that will contribute to personal career development and progression. It fulfils professional development requirements and can enhance your membership status with professional bodies and institutions.

Managing a construction project from design through to occupation requires a wide range of skills and involves many people. This course will help you develop the general business management and construction specific skills required for site management of major complex construction projects.

The University of Bolton leads the way in offering professional courses which are designed with the current and future needs of employers and your career in mind. Our MSc in Construction Management is designed to give you the edge in a demanding marketplace.

What you will study

The course focuses on the activities of business management and project management. The Research Methods module allows you to examine a problem of your choice in the workplace. It acts as an introductory module enabling you to develop many of the skills required for academic study in subsequent parts of the programme. These skills include information retrieval and analysis. You will be encouraged to make judgments about problems based upon examination of evidence. A further option module allows you to select a topic related to your own interest, or a priority of your employer. The completion of a dissertation allows you to deepen your knowledge in a particular area, and to apply your research and subject related skills to analyse a situation and develop an appropriate solution.

You will learn key management skills including critical analysis, high level presentation skills, project collaboration and consensus, and team working. You will take responsibility for your own learning and will also learn and collaborate in a small group environment.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less
The MSc Accountancy (Advanced Standing) is an advanced qualification for professionals wishing to pursue financially-oriented careers in UK public and private sector businesses or international organisations. Read more
The MSc Accountancy (Advanced Standing) is an advanced qualification for professionals wishing to pursue financially-oriented careers in UK public and private sector businesses or international organisations. To be eligible to join this course you must have already completed a relevant professional qualification linked with the CCAB.

By studying on this course you will develop a systematic understanding of the tools and techniques of accounting and financial analysis and gain a critical understanding of the principal research traditions and research methods used in accountancy.

What will you learn?

You will learn to apply knowledge and a critical understanding by undertaking a research project in an area of accounting in the global business context. This will help you to develop a comprehensive understanding of research techniques that will benefit you both practically and academically. This will be particularly valuable if you choose to continue on to doctoral-level studies.

The MSc Accountancy will fine-tune your personal effectiveness in terms of self-awareness, self-reflection and self-management, time management, sensitivity to diversity in people and different situations, and the ability to continue to learn through reflection on practice and experience. The course will enhance your lifelong learning and transferable skills so that you are able to work with self-direction and originality and contribute to business, the professions and society at large.

Special features

The MSc Accountancy offers you the chance to join a well-established, vibrant and multi-cultural postgraduate community engaged in preparing themselves for a career in accounting and financial strategy.

Teaching and supervision is by a well qualified and dedicated team of experienced staff drawn from business and academia.

The University of Bolton offers an excellent library and 24/7 IT facilities, WiFi and learning areas.
The University has a long standing reputation for working closely with industry and professional bodies, such as the ACCA, IFA and CIMA.

For more information please visit http://www.bolton.ac.uk/postgrad

Read less

Show 10 15 30 per page



Cookie Policy    X