• University of Bristol Featured Masters Courses
  • Birmingham City University Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Cardiff University Featured Masters Courses
  • University of Surrey Featured Masters Courses
  • Northumbria University Featured Masters Courses
  • University of Northampton Featured Masters Courses
London Metropolitan University Featured Masters Courses
Queen Mary University of London Featured Masters Courses
Cranfield University Featured Masters Courses
University of Leeds Featured Masters Courses
University of Bath Featured Masters Courses
"biofuels"×
0 miles

Masters Degrees (Biofuels)

We have 33 Masters Degrees (Biofuels)

  • "biofuels" ×
  • clear all
Showing 1 to 15 of 33
Order by 
Chemical Engineering is key in addressing global challenges relating to sustainable supply of clean energy, food and water, through the production of chemicals, functionalised products and fuels. Read more

Chemical Engineering is key in addressing global challenges relating to sustainable supply of clean energy, food and water, through the production of chemicals, functionalised products and fuels. The MSc in Advanced Chemical Engineering provides technical and management training that employers increasingly demand from chemical engineers. The programme offers a general Chemical Engineering option, which covers core chemical engineering subjects and a range of specialised optional modules; and a Biorefining option (formerly the Biofuels Process Engineering MSc), which provides advanced understanding of the production of bioenergy and biofuels while strengthening the knowledge on chemical engineering discipline.

Who is it for?

The course is suitable for engineering and applied science graduates who wish to embark on successful careers as chemical engineering professionals.

Our general Chemical Engineering route equips you with diversified skills in advanced engineering, which includes theoretical and practical elements in operation, design, and control of a wide range of chemical processes. The Biorefining route (formerly the Biofuels Process Engineering MSc) equips you with fundamental understanding of chemical engineering and solid skills to address the challenges of the rapidly growing and dynamic bioenergy sector. This option covers the sustainable production of heat, power and fuels from biomass within the biorefining framework. Both routes include training in management applied to the energy sector which enables engineers to effectively fulfil a wider role in a business organisation.

Why this course?

Chemical engineering is a continuously evolving discipline linked to a variety of industries. Chemical engineers lead the design of large-scale facilities in the chemical, petrochemical, and industrial biotechnology sectors.

A distinguished feature of this course is that it is not directed exclusively at chemical engineering graduates. This MSc will provide you with the training and knowledge skill set that employers actively seek in a desirable engineering graduate. We recognise the importance of an interdisciplinary approach; as such the core and optional modules and course contents have been carefully developed to meet the engineering skill shortage currently faced within industry. In particular, no other university in the UK offers a MSc in Advanced Chemical Engineering with a dedicated option in Biorefining. You will develop the professional profile required by the growing biobased sector (more than 480,000 jobs and annual turnover of about €50 million only in the European Union), with a high level of skills' transferability across the chemical and energy sectors.

Cranfield is an exclusively postgraduate university with distinctive expertise in technology and management. There are also numerous benefits associated with undertaking a postgraduate programme of study in here. These include:

  • Teaching activities involving bespoke pilot plant facilities
  • Undertaking projects in consultation with industry, government and its agencies, local authorities and consultants
  • Lecturing from leading academics and industrial practitioners
  • Dedicated support for off-campus learners including extensive information resources managed by our library.
  • Very well located for part-time students which enables students from all over the world to complete their qualification whilst balancing work/life commitments.
  • A Career Development Service, which is an accredited member of the Association of Graduate Careers Advisory Services (AGCAS) and provides a personalised service to Cranfield students and alumni, working to enhance careers and increase opportunities. 

Course details

The taught programme is delivered from October to February and is comprised of eight modules. The modules are delivered over one week of intensive delivery with the later part of the module being free from structured teaching to allow time for more independent learning and reflection. Students on the part-time programme will complete all of the modules based on a flexible schedule that will be agreed with the Course Director.

Group project

The Group Project, undertaken between February and April, enables you to put the skills and knowledge developed during the course modules into practice in an applied context, while gaining transferable skills in project management, teamwork and independent research. Projects are often supported by industry and potential future employers value this experience. The group project is normally multidisciplinary and shared across the Energy MSc programme, giving the added benefit of working with students with other backgrounds.

Each group is given an industrially relevant problem to solve. During the project you will develop a range of skills including learning how to establish team member roles and responsibilities, project management, and delivering technical presentations. At the end of the project, all groups submit a written report and deliver a poster presentation to industry partners. This presentation provides the opportunity to develop presentation skills and effectively handle questions about complex issues in a professional manner.

Part-time students are encouraged to participate in a Group Project as it provides a wealth of learning opportunities. However, an option of an individual dissertation is available if agreed with the Course Director.

Individual project

The individual research project allows students to investigate deeper into an area of specific interest. It is very common for industrial partners to put forward real world problems or areas of development as potential research project topics. The individual research project component takes place between May and September.

If agreed with the Course Director, part-time students have the opportunity to undertake projects in collaboration with their place of work, which would be supported by academic supervision.

Individual research projects undertaken may involve feasibility assessments, reviews, practical evaluations, designs, simulations, and experimental investigations.

Assessment

Taught Modules 40%, Group Project 20%, Individual Research Project 40%

Your career

Industry driven research makes our graduates some of the most desirable in the world for recruitment by companies competing in a range of industries, including chemicals, petrochemicals, biochemicals, conventional energy and bioenergy, food, materials, consultancy and management.

Those wishing to continue their education via PhD or MBA studies in the chemical or energy sectors will be greatly facilitated by the interdisciplinary, project-oriented profile that they will have acquired through this course.



Read less
Engineering organisms and processes to generate the products of the future. Many everyday products are generated using biological processes. Read more

Engineering organisms and processes to generate the products of the future

Many everyday products are generated using biological processes. Foods such as bread, yoghurt and beer rely upon microscopic organisms to generate their structure and flavour. Many drugs are made using cells, such as insulin used to treat diabetes and many anticancer chemotherapy drugs. In the future, more products will be made using biological processes as they are typically ‘greener’ than traditional chemical processes – they are less energy intensive and generate fewer harmful chemical by-products. Biological processes are also responsible for many environmentally-friendly biofuels, which aim to reduce fossil fuel use.

Biological processes are key to many UK companies, from small contract manufacturers of protein and DNA drugs to large companies making fuels, commodity chemicals, foods and plastics. Biochemical engineering is an area that is essential to UK, European and Worldwide industrial development.

This is a highly multidisciplinary subject, requiring the integration of engineering and bioscience knowledge. If you are interested in pursuing a career in industrial biotechnology, biochemical engineering, biotechnology or bioprocessing, then this programme will provide you with the basic knowledge and skills required. Optional modules expand your horizons to include specific product areas (such as pharmaceuticals) and other skills required for a career in the area (such as business skills).

Birmingham is a friendly School which has one of the largest concentrations of chemical engineering expertise in the UK. The School is consistently in the top five chemical engineering schools for research in the country.

It has a first-class reputation in learning, teaching and research, and is highly placed in both The Guardian and The Times league tables. 

Course details

Biochemical Engineering concerns the use of biological organisms or processes by manufacturing industries. It is a multidisciplinary subject, requiring the integration of engineering and bioscience knowledge to design and implement processes used to manufacture a wide range of products; from novel therapeutics such as monoclonal antibodies for treating cancer, vaccines and hormones, to new environmentally-friendly biofuels. It is also essential in many other fields, such as the safe manufacture of food and drink and the removal of toxic compounds from the environment..

This course will provide you with the skills you need to start an exciting career in the bioprocess industries, or continue research in the area of bioprocessing or industrial biotechnology.

Industry involvement

Academics working at Birmingham have strong links with industry, through collaborative projects, so allow students to make contact with companies. Graduates from the MSc programme have gone on to careers in biochemical engineering world-wide, in large and small companies working in diverse areas.

There are also guest lectures from academics working at other institutions.

Practical experience

You will gain practical experience of working with industrially applicable systems, from fermentation at laboratory scale to 100 litre pilot scale, in the Biochemical Engineering laboratories. Theory learned in lectures will be applied in practical terms. In addition, theoretical aspects will be applied in design case studies in a number of modules.

All MSc students complete a summer research project, working on a piece of individual, novel research within one of the research groups in the school. These projects provide an ideal experience of life as a researcher, from design of experimental work, practical generation of data, analysis and communication of findings. Many students find this experience very useful in choosing the next steps in their career.

Special Features

The lecture courses are supplemented with tutorials, seminars and experimental work. Industrial visits and talks by speakers from industrial and service organisations are also included in the course programme.

Pilot Plant

The Biochemical Engineering building houses a pilot plant with large-scale fermentation and downstream processing equipment. The refurbished facility includes state-of-the-art computer-controlled bioreactors, downstream processing equipment and analytical instruments

Course structure

The MSc is a 12-month full-time advanced course, comprising lectures, laboratory work, short experimental projects and a research project. You will take an introductory module, four core modules, and then choose 50 credits of optional themed modules. The course can also be taken on a part-time basis. The Postgraduate Diploma (PGDip) lasts for 8 months from the end of September until June. 

For the first eight months you have lectures, tutorials and laboratory work. Core module topics include:

  • Fermentation and cell culture
  • Bioseparations
  • Process monitoring and control
  • Systems and synthetic biology approaches

There are numerous optional modules available across three themes: 

  • Biopharmaceutical development and manufacture
  • Food processing
  • Business skills for the process industries

From June to September you gain research training on your own project attached to one of the teams working in the bioprocessing research section.

Related links

Learning and teaching

The MSc is a 12-month full-time advanced course, comprising lectures, laboratory work, short experimental projects and a research project. You will take an introductory module, four core modules, and then choose 50 credits of optional themed modules. The course can also be taken on a part-time basis. The Postgraduate Diploma (PGDip) lasts for 8 months from the end of September until June.  

For the first eight months you have lectures, tutorials and laboratory work. Topics include:

  • Fermentation and cell culture
  • Bioseparations
  • Process monitoring and control
  • Systems and synthetic biology approaches
  • Biopharmaceutical development and manufacture

You also have practical experience of working in the newly-refurbished pilot plant of the Biochemical Engineering building

From June to September you gain research training on your own project attached to one of the teams working in the bioprocessing research section.



Read less
Degree. Master of Science with a major in Energy and Environmental Engineering. The Sustainability Engineering and Management master’s programme deals with the multifaceted challenge of developing products, services and technical systems that contribute to increased resource-effectiveness and sustainability. Read more

Degree: Master of Science with a major in Energy and Environmental Engineering

The Sustainability Engineering and Management master’s programme deals with the multifaceted challenge of developing products, services and technical systems that contribute to increased resource-effectiveness and sustainability.

It is well-known that economic development and human welfare depend on the availability of raw materials and energy. However, the exploitation of such natural resources has many environmental implications such as climate change, resource scarcity and the uncontrolled dispersal of hazardous substances. In times of global environmental problems and concerns about the long-term availability of natural resources such as metals and minerals, incentives for using materials and energy in more intelligent and efficient ways are increasing among governments, companies and other organisations.

McKinsey, one of the largest management consultancy firms in the world, has emphasised the urgent need for a resource revolution. The aim is to address the anticipated economic and political implications of resource scarcity, steadily increasing pollution levels from primary production and the uneven distribution of natural resources among regions. Companies are thus facing the challenge of delivering increasing amounts of products and services, while at the same time preventing the depletion of natural resources, cutting costs and contributing to a sustainable society.

Combined research perspectives

This master’s programme offers a unique knowledge profile and aims to train future engineers who can contribute to such a societal transition towards the more efficient use of natural resources. More specifically, you will learn how to combine a multidisciplinary system perspective with skills in modern environmental and energy engineering. With this proactive and holistic approach, environmental problems can often be significantly limited or prevented, without jeopardising human well-being.

The programme combines the perspectives of two research groups – Energy Systems and Environmental Technology and Management – at the Department of Management and Engineering. These groups deal with system solutions and state-of-the-art research in areas like renewable energy and biofuels, energy efficiency, waste management, urban and landfill mining, corporate environmental management and integrated product-service offerings. Several renewable energy solutions have already been implemented in the region, which means that you will have the opportunity to see how such environmental technology works in practice. Moreover, there is a national research excellence centre on biogas production and utilisation located at the university, which involves a wide network of academic, industry-related and public actors.

Innovation courses included

The first semester features introductory courses in environmental engineering and energy systems, and courses in traditional engineering topics such as product development and project management. The second and third semesters involve specialisation in concepts, strategies and methods for achieving more efficient use of materials and energy, at business, inter-business and societal levels. These semesters also include courses on the development and implementation of sustainability concepts and strategies such as innovative entrepreneurship and innovation management.

Examples of courses within the programme are: Energy Systems, Large Technical Systems and the Environment, Energy Systems Analysis, Innovative Entrepreneurship, Biofuels for Transportation, Industrial Ecology, Management Systems and Sustainability, Innovation Management and Resource-Efficient Products.

The programme concludes with a degree project (30 ECTS) in the final semester.



Read less
Process systems engineering deals with the design, operation, optimisation and control of all kinds of chemical, physical, and biological processes through the use of systematic computer-aided approaches. Read more

Process systems engineering deals with the design, operation, optimisation and control of all kinds of chemical, physical, and biological processes through the use of systematic computer-aided approaches. Its major challenges are the development of concepts, methodologies and models for the prediction of performance and for decision-making for an engineered system.

Who is it for?

Suitable for engineering and applied science graduates who wish to embark on successful careers as process systems engineering professionals. 

The course equips graduates and practising engineers with an in-depth knowledge of the fundamentals of process systems and an excellent competency in the use of state-of-the-art approaches to deal with the major operational and design issues of the modern process industry. The course provides up-to-date technical knowledge and skills required for achieving the best management, design, control and operation of efficient process systems. 

Why this course?

Process systems engineering constitutes an interdisciplinary research area within the chemical engineering discipline. It focuses on the use of experimental techniques and systematic computer-aided methodologies for the design, operation, optimisation and control of chemical, physical, and biological processes, e.g. from chemical and petrochemical processes to pharmaceutical and food processes. 

A distinguished feature of this course is that it is not directed exclusively at chemical engineering graduates. Throughout the years, the course has evolved from discussions with industrial advisory panels, employers, sponsors and previous students. The content of the study programme is updated regularly to reflect changes arising from technical advances, economic factors and changes in legislation, regulations and standards.

By completing this course, a diligent student will be able to: 

  • Evaluate the technical, environmental and economic issues involved in the design and operation of process plants and the current practice in process industries.
  • Apply effectively the knowledge gained to the design, operation, optimisation and control of process systems via proper methodologies and relevant software.
  • Apply independent learning, especially via the effective use of information retrieval systems and a competent and professional approach to solving problems of industrial process systems.
  • Apply and critically evaluate key technical management principles, including project management, people management, technology marketing, product development and finance.
  • Apply advanced approaches and use effectively related tools in more specialised subjects related to process industries (for example risk management, biofuels or CFD tools).
  • Integrate knowledge, understanding and skills from the taught modules in a real-life situation to address problems faced by industrial clients; creating new problem diagnoses, designs, or system insights; and communicating findings in a professional manner in written, oral and visual forms.
  • Define a research question, develop aim(s) and objectives, select and execute a methodology, analyse data, evaluate findings critically and draw justifiable conclusions, demonstrating self-direction and originality of thought.
  • To communicate his/her individual research via a thesis and in an oral presentation in a style suitable for academic and professional audiences.

Accreditation

This MSc degree is accredited by Institution of Mechanical Engineers (IMechE).

Course details

The taught programme for the MSc in Process Systems Engineering is delivered from October to February and is comprised of six compulsory taught modules. There are four optional modules to select the remaining two modules from.

Group project

The Group Project, which runs between February and April, enables you to put the skills and knowledge developed during the course modules into practice in an applied context while gaining transferable skills in project management, teamwork and independent research. The group project is usually sponsored by industrial partners who provide particular problems linked to their plant operations. Projects generally require the group to provide a solution to the operational problem. Potential future employers value this experience. This group project is shared across the MSc in Process Systems Engineering and other courses, giving the added benefit of gaining new insights, ways of thinking, experience and skills from students with other backgrounds

During the project you will develop a range of skills including learning how to establish team member roles and responsibilities, project management, and delivering technical presentations. At the end of the project, all groups submit a written report and deliver a presentation to the industrial partner. This presentation provides the opportunity to develop interpersonal and presentation skills within a professional environment.

It is clear that the modern engineer cannot be divorced from the commercial world. In order to provide practice in this matter, a poster presentation will be required from all students. This presentation provides the opportunity to develop presentation skills and effectively handle questions about complex issues in a professional manner.

Part-time students are encouraged to participate in a group project as it provides a wealth of learning opportunities. However, an option of an individual dissertation is available if agreed with the Course Director.

Individual project

The individual research project allows you to delve deeper into a specific area of interest. As our academic research is so closely related to industry, it is very common for our industrial partners to put forward real-world problems or areas of development as potential research topics.

The individual research project component takes place between April/May and August for full-time students. For part-time students, it is common that their research projects are undertaken in collaboration with their place of work under academic supervision; given the approval of the Course Director.

Individual research projects undertaken may involve designs, computer simulations, feasibility assessments, reviews, practical evaluations and experimental investigations.

Typical research areas include:

  • Design, simulation and optimisation of process or energy systems.
  • Advanced process control methodologies.
  • Instrumentation and process measurement systems.
  • Multi-phase flow and processes.
  • Renewable energy systems.
  • Studies involving environmental issues.

Assessment

Taught modules 40%, Group project 20% (dissertation for part-time students), Individual Research Project 40%.

Your career

Graduates of the course have been successful in gaining employment in:

  • Engineering consultancies and design practices
  • Industry (oil and gas, petrochemical, chemical, food and drink, water and energy)
  • Research organisations
  • Central government departments
  • Local governments
  • Academic institutions.


Read less
How can biological processes and organisms be used in the development of new technologies? Biotechnology enables us to improve practices in diverse fields including genetics, agriculture, bioremediation, immunology, diagnostics, energy production, and age-assisted living. Read more
How can biological processes and organisms be used in the development of new technologies? Biotechnology enables us to improve practices in diverse fields including genetics, agriculture, bioremediation, immunology, diagnostics, energy production, and age-assisted living.

Our course provides you with knowledge, understanding and hands-on experience in modern biotechnology, and with practical insights into current commercial applications. It creates access to a broad range of career opportunities in this rapidly growing key technology.

You will learn about and appraise the approaches that can be used to address the challenges facing our planet, including:
-The development of biofuels, pharmaceuticals and crops to support and feed the growing human population
-Industrial, plant and medical biotechnology
-Gene and protein technology
-Synthetic biology
-Bioinformatics

The course has a very high proportion of practical work that provides valuable experience for your career, and in addition to this, our optional module Creating and Growing a New Business Venture challenges you to think creatively. This increases your value to organisations, including small enterprises, which are a growing part of the biotechnology sector.

Your research project is a major component of this course, for which you perform novel laboratory and/or bioinformatic research in one of our academic laboratories, or (subject to approval) carry out research in an industrial or hospital setting.

Two-thirds of our research is rated “world-leading” or “internationally excellent” (REF 2014), and you learn from and work alongside our expert staff.

Our expert staff

As one of the largest schools at our University, we offer a lively, friendly and supportive environment with research-led study and high quality teaching. You benefit from our academics’ wide range of expertise and research on important national and international problems using cutting-edge techniques.

The University of Essex has a Women's Network to support female staff and students and was awarded the Athena SWAN Institutional Bronze Award in November 2013 in recognition of its continuing work to support women in STEM.

Specialist facilities

Recent investment has provided modern facilities for functional genomics, computational biology, and imaging biological systems. On our course you have the opportunity to:
-Work in an open and friendly department, with shared staff-student social spaces
-Conduct your research alongside leading academics and PhD students in shared labs
-Learn to use state-of-the-art equipment

Your future

Our graduates are well placed to find employment in the ever-growing bio-based economy, and postgraduate study is often a requirement for becoming a researcher, scientist, academic journal editor and to work in some public bodies or private companies.

Many of our Masters students progress to study for their PhD, and we offer numerous studentships to support our students in their studies.

We work with our university’s Employability and Careers Centre to help you find out about further work experience, internships, placements, and voluntary opportunities.

Example structure

Postgraduate study is the chance to take your education to the next level. The combination of compulsory and optional modules means our courses help you develop extensive knowledge in your chosen discipline, whilst providing plenty of freedom to pursue your own interests. Our research-led teaching is continually evolving to address the latest challenges and breakthroughs in the field, therefore to ensure your course is as relevant and up-to-date as possible your core module structure may be subject to change.

Biotechnology - MSc
-Research Project: MSc Biotechnology
-Protein Technologies
-Gene Technology and Synthetic Biology
-Genomics
-Professional Skills and the Business of Biotechnology
-Creating and Growing a New Business Venture (optional)
-Industrial Biotechnology: Enzymes, Biochemicals and Biomaterials (optional)
-Molecular Medicine and Biotechnology (optional)
-Plant Biotechnology (optional)
-Rational Drug Design (optional)

Read less
This course is aimed at professional engineers aspiring to increased management responsibility in the building services sector or who have reached a stage in their careers when they are carrying increasing management responsibility. Read more

About the course

This course is aimed at professional engineers aspiring to increased management responsibility in the building services sector or who have reached a stage in their careers when they are carrying increasing management responsibility.

It caters to the worldwide demand for building services engineering managers who have a sound knowledge of engineering and management principles – and the ability to apply this knowledge to complex situations.

Management modules cover engineering finance and accounting, people management, business organisation and facilities and contract management.

Aims

Building Service Engineers help buildings to deliver on their potential by working with architects and construction engineers to produce buildings that offer the functionality and comfort we expect, with the minimum impact on our environment. They design the lighting appropriate for the space, the heating, cooling, ventilation and all systems that ensure comfort, health and safety in all types of buildings, residential commercial and industrial.

Building services engineering is an interdisciplinary profession. It involves the specification, design, installation and management of all the engineering services associated with the built environment.

With the growing complexity of engineering services in modern buildings and the significance of energy conservation and pollution control, the role of the building services engineer is becoming increasingly important.

As an interdisciplinary profession that involves the specification, design, installation and management of all the engineering services associated with the built environment, comfort and function also need to be combined – which calls for engineers with a wide range of knowledge and skills.

This MSc programme is for:

Recent engineering and technology graduates, moving into building services and related disciplines.
Established engineers and technologists, working in building services and faced with the challenge of new areas of responsibility.
Engineers who want to develop technical understanding and expertise across the multi-disciplines of building services engineering.
Managers and designers, who need to broaden their experience and require updating.
Lecturers in higher education, moving into or requiring updating in building services engineering.
Others with engineering and technology backgrounds, perhaps working in advisory or consultancy roles, who wish to familiarise themselves with building services engineering. However, choice of course will be dependent upon the type and extent of knowledge and skills required.

Course Content

Modes of Study
3-5 Years Distance Learning

The distance learning programme is designed to enable you to conduct most of your studies at home, in your own time and at your own pace.

There is no requirement to attend lectures at Brunel University and there is no set timetable of lectures, instead you follow a structured programme of self-study at home or at work. This gives you the freedom to arrange a work programme to suit yourself and you should usually allow about twelve hours each week for study.

There are set submission dates for assignments but we have tried to design the programme so that they are well-spaced, giving you the maximum flexibility in your study plans.

You can take between three and five years to complete the course. The average is three years, with students taking four modules in the first year, four modules in the second year and the dissertation in the third year. However, depending on your other commitments you can take longer up to a maximum of five years.

You are supplied with a study pack in the form of textbooks and CD-ROMs; you have assignments to submit and exams to sit each year.

Examinations can be taken either at Brunel University or in the country you are resident in. We have an extensive network of organisations (universities, colleges and British Council offices) throughout the world who will provide invigilation services.

The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Compulsory Modules

Building Heat Transfer and Air Conditioning
Electrical Services and Lighting Design
Acoustics, Fire, Lifts and Drainage
Engineering Finance and Accounting
Management of People in Engineering Activities
Organisation of Engineering Business
Management of Facilities and Engineering Contracts
Dissertation

Students should choose one of the two themes below:

Theme A - Traditional

Energy Conversion Technologies
This element provides a broad introduction to the principles of energy conversion and thermodynamic machines and demonstrates their application to energy conversion and management in buildings. Emphasis is placed on refrigeration plant, energy conversion plant and energy management.
Refrigeration covers the basic principles and components of vapour compression systems, heat pumps and absorption systems.
Energy Conversion considers power cycles, combined heat and power, combustion processes, boiler plant, thermal energy storage and environmental impacts of plant operation.

Theme B - Renewable

Renewable Energy Technologies
This element includes: energy sources, economics and environmental impact, energy storage technologies, the role of renewables, solar thermal, solar electricity, wind power generation, hydro, tidal and wave power, biofuels, building integrated renewables.

Special Features

There are several advantages in choosing Brunel's Building Services programme:

Award-winning courses: Building Services Engineering courses at Brunel have been awarded the Happold Brilliant Award for teaching excellence by the Chartered Institution of Building Services Engineers.

Relevance: it is well established within the building services industry, with sponsors of students that include major design and contracting organisations, area health authorities, local authorities and the British Council, as well as several national governments.

Applicability: emphasis on applications enables students and employers to benefit immediately from the skills and knowledge gained.

Responsiveness: Brunel's proximity to London, where large and innovative building developments have been taking place over the last decade, enables rapid infusion of new ideas and technological innovations into the programme content.

Excellent facilities

We have extensive and well-equipped laboratories, particular areas of strength being in fluid and biofluid mechanics, IC engines, vibrations, building service engineering, and structural testing. Our computing facilities are diverse and are readily available to all students. The University is fully networked with both Sun workstations and PCs. Advanced software is available for finite and boundary element modelling of structures, finite volume modelling of flows, and for the simulation of varied control systems, flow machines, combustion engines, suspensions, built environment, and other systems of interest to the research groups.

Accreditation

The course is approved by the Chartered Institute of Building Services Engineers (CIBSE) and the Institution of Mechanical Engineers (IMechE) as appropriate additional academic study (further learning) for those seeking to become qualified to register as Chartered Engineers (CEng).

Teaching

Students are supplied with a study pack in the form of text books and CD-ROMs; you have assignments to submit and exams to sit each year. Examinations can be taken either at Brunel University or in the country you are resident in.
We have an extensive network of organisations (Universities, Colleges and British Council Offices) throughout the world who will provide invigilation services. The cost of invigilation away from Brunel is your responsibility. Examinations are held in May each year.

Assessment

Each module is assessed either by formal examination, written assignments or a combination of the two. Cut-off dates for receipt of assignments are specified at the beginning of each stage. Examinations are normally taken in May.
Successful completion of the taught modules allows the student to proceed to the dissertation stage. To qualify for the award of the MSc degree, the student must submit a satisfactory dissertation.

Read less
One of major challenges of the last decade was to achieve a sustaniable energy supply - for now and in the future. At the same time, the amount of renewable energy has been increasing simultaneously and has, thus, raised the question of how to sucessfully integrate renewable energy in already existing energy systems. Read more

One of major challenges of the last decade was to achieve a sustaniable energy supply - for now and in the future. At the same time, the amount of renewable energy has been increasing simultaneously and has, thus, raised the question of how to sucessfully integrate renewable energy in already existing energy systems.

The part-time MSc Renewable Energy Systems is the first cross-border program in Europe dealing with the future issues of alternative energy production and the intregration of renewables. Since 2005, TU Wien, Energiepark Bruck/Leitha and further partner organisations across Europe have offered this practice-oriented international Master’s program.

Contents

This Master's program focuses on three aspects in particular: technological innovations, management of sustainable energy systems, and economic as well as legal frameworks.

  • Technological Innovations: Participants acquire a basic technical knowledge in the area of alternative energy production. The fast-changing nature and development of this sector are specifically considered. Focal points are solar energy, wind power, biomass, biogas, small hydropower stations, photovoltaics, bio fuel, and geothermal technology as well as issues, such as energy saving and energy efficiency.
  • Management of Sustainable Energy Systems: Conveys skills, such as project development, project financing, project operation, and knowledge on business management. Furthermore, participants obtain a detailed market overview on selected European countries.
  • General Economic and Legal Framework: Participants obtain knowledge on the general economic and legal frameworks of European Union as well as national directives and legal provisions of selected European countries.

Modules

  • Introduction on Renewable Energy
  • Biomass, Biofuels and Biogas
  • Solar Energy – Solar Heating and Photovoltaics
  • Geothermal Energy, Wind Power, and Small Hydro Power
  • Efficient Energy Use and Thermal Building Optimization
  • General Legal and Economical Frameworks
  • Integration of Renewable Energy Sources into the Energy System
  • Management and Soft Skills
  • Perspectives on the Use of Renewable Energy
  • Master´s Thesis

More details on the contents and modules can be found here.

Country Modules

To provide the participants with in-depth knowledge on energy markets in Europe, tailor-made country modules in selected European countries are an essential part of this MSc program. For more information in the country modules, please click here.

Target Group

Individuals within companies, organisations, and authorities who are engaged in planning, operating or evaluation of renewable energy or who are involved in financing, promotion, legal licensing, operation of facilities for the use of renewable energy or environmental issues.

Program Objectives/Goals

With the MSc Program you acquire knowledge and competence for

  • the design of plants for the use of renewable energy sources from economic and legal point-of-view
  • the operation of plants for the use of renewable energy sources,
  • the future assessment of environmental, technological and economic developments of renewable energy systems.


Read less
This is an advanced, specialist programme in the rapidly expanding area of renewable energy engineering with a clear Mechanical Engineering focus. Read more

This is an advanced, specialist programme in the rapidly expanding area of renewable energy engineering with a clear Mechanical Engineering focus. The programme is aimed at students wishing to develop critical understanding of the significant changes afoot in the energy system due to the development and integration of wind, marine, biomass and solar technologies. The programme will enable graduates to develop and implement creative solutions to the problems encountered in renewable energy capture, conversion, storage and management.

Students will gain the knowledge and skills to assess renewable energy resources, design appropriate renewable energy systems, evaluate the performance of these systems and assess the wider impacts of renewable energy development. The programme provides introductory courses to fundamental energy science and current energy issues, while the project-led courses focus on the design of renewable energy systems. The programme concludes with a research-led dissertation in the summer.

Renewable energy research focuses on six main areas:

  • Photovoltaics and Solar Energy
  • Wind and Marine Energy
  • Renewable Energy Systems
  • Minimising CO2 Emissions
  • Biofuels
  • Wind and Marine Energy


Read less
Visit our website for more information on fees, scholarships, postgraduate loans and other funding options to study Power Engineering and Sustainable Energy at Swansea University - 'Welsh University of the Year 2017' (Times and Sunday Times Good University Guide 2017). Read more

Visit our website for more information on fees, scholarships, postgraduate loans and other funding options to study Power Engineering and Sustainable Energy at Swansea University - 'Welsh University of the Year 2017' (Times and Sunday Times Good University Guide 2017).

The Master's course in Power Engineering and Sustainable Energy places strong emphasis on state-of-the-art semiconductor devices and technologies, advanced power electronics and drives, and advanced power systems. The Power Engineering and Sustainable Energy course also covers conventional and renewable energy generation technologies. Exciting new developments such as wide band gap electronics, energy harvesting, solar cells and biofuels are discussed and recent developments in power electronics are highlighted.

Key Features of MSc in Power Engineering and Sustainable Energy

The College of Engineering has an international reputation for electrical and electronics research for energy and advanced semiconductor materials and devices.

Greenhouse gas emission and, consequently, global warming are threatening the global economy and world as we know it. A non-rational use of electrical energy largely contributes to these.

Sustainable energy generation and utilisation is a vital industry in today’s energy thirsty world. Energy generation and conversion, in the most efficient way possible, is the key to reducing carbon emissions. It is an essential element of novel energy power generation system and future transportation systems. The core of an energy conversion system is the power electronics converter which in one hand ensures the maximum power capture from any energy source and on another hand controls the power quality delivered to grid. Therefore the converter parameters such as efficiency, reliability and costs are directly affecting the performance of an energy system.

Transmission and distribution systems will encounter many challenges in the near future. Decentralisation of generation and storage systems has emerged as a promising solution. Consequently, in the near future, a power grid will no longer be a mono-directional energy flow system but a bi-directional one, requiring a much more complex management.

The MSc in Power Engineering and Sustainable Energy is modular in structure. Students must obtain a total of 180 credits to qualify for the degree. This is made up of 120 credits in the taught element (Part One) and a project (Part Two) that is worth 60 credits and culminates in a written dissertation. Power Engineering and Sustainable Energy students must successfully complete Part One before being allowed to progress to Part Two.

Part-time Delivery mode

The part-time scheme is a version of the full-time equivalent MSc in Power Engineering and Sustainable Energy scheme, and as such it means lectures are spread right across each week and you may have lectures across every day. Due to this timetabling format, the College advises that the scheme is likely to suit individuals who are looking to combine this with other commitments (typically family/caring) and who are looking for a less than full-time study option.

Those candidates seeking to combine the part-time option with full-time work are unlikely to find the timetable suitable, unless their job is extremely flexible and local to the Bay Campus.

Modules

Modules on the MSc Power Engineering and Sustainable Energy course can vary each year but you could expect to study:

Advanced Power Electronics and Drives

Power Semiconductor Devices

Advanced Power Systems

Energy and Power Engineering Laboratory

Power Generation Systems

Modern Control Systems

Wide Band-Gap Electronics

Environmental Analysis and Legislation

Communication Skills for Research Engineers

Optimisation

Facilities

The new home of MSc in Power Engineering and Sustainable Energy is at the innovative Bay Campus provides some of the best university facilities in the UK, in an outstanding location.

Engineering at Swansea University has extensive IT facilities and provides extensive software licenses and packages to support teaching. In addition the University provides open access IT resources.

Our new WOLFSON Foundation funded Power Electronics and Power System (PEPS) laboratory well-appointed with the state-of the-art equipment supports student research projects.

Careers

Employment in growing renewable energy sector, power electronic and semiconductor sector, electric/hybrid vehicle industry.

The MSc Power Engineering and Sustainable Energy is for graduates who may want to extend their technical knowledge and for professional applicants be provided with fast-track career development. This MSc addresses the skills shortage within the power electronics for renewable energy sector.

Links with industry

BT, Siemens, Plessey, GE Lighting, Schlumberger, Cogsys, Morganite, Newbridge Networks, Alstom, City Technology, BNR Europe, Philips, SWALEC, DERA, BTG, X-Fab, ZETEX Diodes, IQE, IBM, TSMC, IR, Toyota, Hitachi.

As a student on the MSc Power Engineering and Sustainable Energy course, you will learn about numerical simulation techniques and have the opportunity to visit electronics industries with links to Swansea.

Research

The Research Excellence Framework (REF) 2014 ranks Engineering at Swansea as 10th in the UK for the combined score in research quality across the Engineering disciplines.

The REF assesses the quality of research in the UK Higher Education sector, assuring us of the standards we strive for.

World-Leading Research

The REF shows that 94% of research produced by our academic staff is of World-Leading (4*) or Internationally Excellent (3*) quality. This has increased from 73% in the 2008 RAE.

Research pioneered at the College of Engineering harnesses the expertise of academic staff within the department. This ground-breaking multidisciplinary research informs our world-class teaching with several of our staff leaders in their fields.

With recent academic appointments strengthening electronics research at the College, the Electronic Systems Design Centre (ESDC) has been re-launched to support these activities.

The Centre aims to represent all major electronics research within the College and to promote the Electrical and Electronics Engineering degree.

Best known for its research in ground-breaking Power IC technology, the key technology for more energy efficient electronics, the Centre is also a world leader in semiconductor device modelling, FEM and compact modelling.



Read less
Our Energy programmes allow you to specialise in areas such as bio-energy, novel geo-energy, sustainable power, fuel cell and hydrogen technologies, power electronics, drives and machines, and the sustainable development and use of key resources. Read more
Our Energy programmes allow you to specialise in areas such as bio-energy, novel geo-energy, sustainable power, fuel cell and hydrogen technologies, power electronics, drives and machines, and the sustainable development and use of key resources.

We can supervise MPhil projects in topics that relate to our main areas of research, which are:

Bio-energy

Our research spans the whole supply chain:
-Growing novel feedstocks (various biomass crops, algae etc)
-Processing feedstocks in novel ways
-Converting feedstocks into fuels and chemical feedstocks
-Developing new engines to use the products

Cockle Park Farm has an innovative anaerobic digestion facility. Work at the farm will develop, integrate and exploit technologies associated with the generation and efficient utilisation of renewable energy from land-based resources, including biomass, biofuel and agricultural residues.

We also develop novel technologies for gasification and pyrolysis. This large multidisciplinary project brings together expertise in agronomy, land use and social science with process technologists and engineers and is complemented by molecular studies on the biology of non-edible oilseeds as sources for production of biodiesel.

Novel geo-energy

New ways of obtaining clean energy from the geosphere is a vital area of research, particularly given current concerns over the limited remaining resources of fossil fuels.

Newcastle University has been awarded a Queen's Anniversary Prize for Higher Education for its world-renowned Hydrogeochemical Engineering Research and Outreach (HERO) programme. Building on this record of excellence, the Sir Joseph Swan Centre for Energy Research seeks to place the North East at the forefront of research in ground-source heat pump systems, and other larger-scale sources of essentially carbon-free geothermal energy, and developing more responsible modes of fossil fuel use.

Our fossil fuel research encompasses both the use of a novel microbial process, recently patented by Newcastle University, to convert heavy oil (and, by extension, coal) to methane, and the coupling of carbon capture and storage (CCS) to underground coal gasification (UCG) using directionally drilled boreholes. This hybrid technology (UCG-CCS) is exceptionally well suited to early development in the North East, which still has 75% of its total coal resources in place.

Sustainable power

We undertake fundamental and applied research into various aspects of power generation and energy systems, including:
-The application of alternative fuels such as hydrogen and biofuels to engines and dual fuel engines
-Domestic combined heat and power (CHP) and combined cooling, heating and power (trigeneration) systems using waste vegetable oil and/or raw inedible oils
-Biowaste methanisation
-Biomass and biowaste combustion, gasification
-Biomass co-combustion with coal in thermal power plants
-CO2 capture and storage for thermal power systems
-Trigeneration with novel energy storage systems (including the storage of electrical energy, heat and cooling energy)
-Engine and power plant emissions monitoring and reduction technology
-Novel engine configurations such as free-piston engines and the reciprocating Joule cycle engine

Fuel cell and hydrogen technologies

We are recognised as world leaders in hydrogen storage research. Our work covers the entire range of fuel cell technologies, from high-temperature hydrogen cells to low-temperature microbial fuel cells, and addresses some of the complex challenges which are slowing the uptake and impact of fuel cell technology.

Key areas of research include:
-Biomineralisation
-Liquid organic hydrides
-Adsorption onto solid phase, nano-porous metallo-carbon complexes

Sustainable development and use of key resources

Our research in this area has resulted in the development and commercialisation of novel gasifier technology for hydrogen production and subsequent energy generation.

We have developed ways to produce alternative fuels, in particular a novel biodiesel pilot plant that has attracted an Institution of Chemical Engineers (IChemE) AspenTech Innovative Business Practice Award.

Major funding has been awarded for the development of fuel cells for commercial application and this has led to both patent activity and highly-cited research. Newcastle is a key member of the SUPERGEN Fuel Cell Consortium. Significant developments have been made in fuel cell modelling, membrane technology, anode development and catalyst and fuel cell performance improvements.

Facilities

As a postgraduate student you will be based in the Sir Joseph Swan Centre for Energy Research. Depending on your chosen area of study, you may also work with one or more of our partner schools, providing you with a unique and personally designed training and supervision programme.

You have access to:
-A modern open-plan office environment
-A full range of chemical engineering, electrical engineering, mechanical engineering and marine engineering laboratories
-Dedicated desk and PC facilities for each student within the research centre or partner schools

Read less
Climate change is a major challenge for the 21st century, requiring an alternative supply of cleaner energy from renewable sources. Read more
Climate change is a major challenge for the 21st century, requiring an alternative supply of cleaner energy from renewable sources. This course is designed with an engineering focus that deals with applications, combined with the business element; applicable whether you work for a large organisation or a small to medium-size enterprise.

The MSc will meet, in part, the exemplifying academic benchmark requirements for registration as a Chartered Engineer. Accredited MSc graduates who also have a BEng(Hons) accredited for CEng, will be able to show that they have satisfied the educational base for CEng registration.

Key features
-The programme provides hands-on skills in 3D CAD and solid modelling, FEA and CFD analysis, Polysun and WindPRO simulations using industry-standard software.
-You can undertake a wide range of challenging and interesting sponsored and non-sponsored projects in the specific areas of wind power, solar power, biofuels and fuel-cells-related technologies.
-Excellent career progression and internship with leading renewable companies: around 80% of students who have graduated from this programme have been recruited by the relevant industries as a consultant such as Atkins, Alstom Power, Inditex, Vattenfall, Shell, SGS UK Ltd and many others.
-Completion of this programme would be an ideal progression to PhD level of research studies if you are interested in following an academic or research career in novel areas of renewable energy.

What will you study?

The course provides an in-depth knowledge of renewable energy systems design and development, commercial and technical consultancy and project management within the sustainable engineering environment.

You will gain technical skills in and knowledge of solar power, wind power, biofuel and fuel cell technologies, as well as renewable energy business and management. In addition, you will gain practical skills in up-to-date computer-aided simulation technologies such as Polysun for solar energy applications, WindPRO for wind farm applications and ECLIPSE for biomass applications.

Option modules enable you to specialise in project engineering and management, as well as risk management or engineering design and development. Advanced topics, such as 3D solid modelling, computer-aided product development and simulation, and computational fluid dynamics (CFD) analysis and simulation allow you to gain further practical and theoretical knowledge of analytical software tools used in product design.

Assessment

Coursework, exams, individual project.

Work placement scheme

Kingston University has set up a scheme that allows postgraduate students in the Faculty of Science, Engineering and Computing to include a work placement element in their course starting from September 2017. The placement scheme is available for both international and home/EU students.

-The work placement, up to 12 months; is optional.
-The work placement takes place after postgraduate students have successfully completed the taught portion of their degree.
-The responsibility for finding the placement is with the student. We cannot guarantee the placement, just the opportunity to undertake it.
-As the work placement is an assessed part of the course for international students, this is covered by a student's tier 4 visa.

Details on how to apply will be confirmed shortly.

Course structure

Please note that this is an indicative list of modules and is not intended as a definitive list.

If you start this course in January, you will complete the same modules as students who started in September but in a different format – please contact us at for more information.

Core modules
-Biomass and Fuel Cell Renewable Technology
-Solar Power Engineering
-Wind Power Engineering
-Project Dissertation

Option modules (choose one)
-Engineering Projects and Risk Management
-Computational Fluid Dynamics for Engineering Applications
-Computer Integrated Product Development

Read less
Have you ever wondered how the latest life science discoveries - such as a novel stem cell therapy - can move from the lab into commercial scale production?… Read more

Have you ever wondered how the latest life science discoveries - such as a novel stem cell therapy - can move from the lab into commercial scale production? Would you like to know whether it is possible to produce bio-polymers (plastics) and biofuels from municipal or agricultural waste? If you are thinking of a career in the pharma or biotech industries, the Biochemical Engineering MSc could be the right programme for you.

About this degree

Our MSc programme focuses on the core biochemical engineering principles that enable the translation of advances in the life sciences into real processes or products. Students will develop advanced engineering skills (such as bioprocess design, bioreactor engineering, downstream processing), state-of-the-art life science techniques (such as molecular biology, vaccine development, microfluidics) and essential business and regulatory knowledge (such as management, quality control, commercialisation).

Three distinct pathways are offered tailored to graduate scientists, engineers, or biochemical engineers.

Students undertake modules to the value of 180 credits.

The programme offers three distinct pathways tailored to: graduate scientists ("Engineering Stream"); graduate engineers from other disciplines ("Science Stream"); or graduate biochemical engineers ("Biochemical Engineering Stream"). The programme for all three streams consists of a combination of core and optional taught modules (120 credits) and a research or design project (60 credits).

Core modules

Students are allocated to one of the three available streams based on their academic background (life science/science, other engineering disciplines, biochemical engineering). The programme for each stream is tailored to the background of students in that stream. Core modules may include the following (depending on stream allocation). 

  • Advanced Bioreactor Engineering
  • Dissertation on Bioprocess Research
  • Fundamental Biosciences
  • Integrated Downstream Processing
  • Sustainable Industrial Bioprocesses and Biorefineries

Please go to the "Degree Structure" tab on the departmental website for a full list of core modules.

Optional modules

Optional modules may include the following (details will vary depending on stream allocation).

  • Bioprocess Management – Discovery to Manufacture
  • Bioprocess Microfluidics
  • Bioprocess Systems Engineering
  • Bioprocess Validation and Quality Control
  • Commercialisation and Bioprocess Research
  • Vaccine Bioprocess Development

Please go to the "Degree Structure" tab on the departmental website for a full list of optional modules

Research project/design project

Students allocated to the "Engineering" stream will have to complete a bioprocess design project as part of their MSc dissertation.

Students allocated to the "Science" and "Biochemical Engineering" streams will have to complete a research project as part of their MSc dissertation.

Teaching and learning

The programme is delivered through a combination of lectures, tutorials, and individual and group activities. Guest lectures delivered by industrialists provide a professional and social context. Assessment is through unseen written examinations, coursework, individual and group project reports, individual and group oral presentations, and the research or design project.

Further information on modules and degree structure is available on the department website: Biochemical Engineering MSc

Careers

The rapid advancements in biology and the life sciences create a need for highly trained, multidisciplinary graduates possessing technical skills and fundamental understanding of both the biological and engineering aspects relevant to modern industrial bioprocesses. Consequently, UCL biochemical engineers are in high demand, due to their breadth of expertise, numerical ability and problem-solving skills. The first destinations of those who graduate from the Master's programme in biochemical engineering reflect the highly relevant nature of the training delivered.

Approximately three-quarters of our graduates elect either to take up employment in the relevant biotechnology industries or study for a PhD or an EngD, while the remainder follow careers in the management, financial or engineering design sectors.

Recent career destinations for this degree

  • Biopharmaceutical Processing Engineer, Johnson & Johnson
  • Process Engineer, ExxonMobil
  • PhD Biochemical Engineering, UCL
  • Bio-Pharmaceutical Engineer, GSK (GlaxoSmithKline)
  • Research Analyst, CIRS (Centre for Innovation in Regulatory Science)

Employability

The department places great emphasis on its ability to assist its graduates in taking up exciting careers in the sector. UCL alumni, together with the department’s links with industrial groups, provide an excellent source of leads for graduates. Over 1,000 students have graduated from UCL with graduate qualifications in biochemical engineering at Master’s or doctoral levels. Many have gone on to distinguished and senior positions in the international bioindustry. Others have followed independent academic careers in universities around the world.

Careers data is taken from the ‘Destinations of Leavers from Higher Education’ survey undertaken by HESA looking at the destinations of UK and EU students in the 2013–2015 graduating cohorts six months after graduation.

Why study this degree at UCL?

UCL was a founding laboratory of the discipline of biochemical engineering, established the first UK department and is the largest international centre for bioprocess teaching and research. Our internationally recognised MSc programme maintains close links with the research activities of the Advanced Centre for Biochemical Engineering which ensures that lecture and case study examples are built around the latest biological discoveries and bioprocessing technologies.

UCL Biochemical Engineering co-ordinates bioprocess research and training collaborations with more than a dozen UCL departments, a similar number of national and international university partners and over 40 international companies. MSc students directly benefit from our close ties with industry through their participation in the Department’s MBI® Training Programme.

The MBI® Training Programme is the largest leading international provider of innovative UCL-accredited short courses in bioprocessing designed primarily for industrialists. Courses are designed and delivered in collaboration with 70 industrial experts to support continued professional and technical development within the industry. Our MSc students have the unique opportunity to sit alongside industrial delegates, to gain deeper insights into the industrial application of taught material and to build a network of contacts to support their future careers. 

Accreditation

Our MSc is accredited by the Institute of Chemical Engineers (IChemE).

The “Science” and “Biochemical Engineering” streams are accredited by the IChemE as meeting the further learning requirements, in full, for registration as a Chartered Engineer (CEng, MIChemE).



Read less
The world faces major challenges in meeting the current and future demand for sustainable and secure energy supply and use. Read more
The world faces major challenges in meeting the current and future demand for sustainable and secure energy supply and use. The one-year MPhil programme in Energy Technologies is designed for graduates who want to help tackle these problems by developing practical engineering solutions, and who want to learn more about the fundamental science and the technologies involved in energy utilization, electricity generation, energy efficiency, and alternative energy.

Energy is a huge topic, of very significant current scientific, technological, environmental, political and financial interest. The complexity and rapid change associated with energy technologies necessitates engineers with a very good grasp of the fundamentals, with exposure and good understanding of all main energy sources and technologies, but also with specialization in a few areas. This is the prevailing philosophy behind this MPhil, fully consistent with the prevailing philosophy and structure of the University of Cambridge Engineering Department as a whole.

See the website http://www.graduate.study.cam.ac.uk/courses/directory/egegmpmet

Course detail

The educational target of the MPhil in Energy Technologies is to communicate the breadth of energy technologies and the underpinning science. The objectives of the course are:

1. To teach the fundamental sciences behind technologies involved in energy utilization, electricity generation, energy efficiency, and alternative energy.

2. To develop graduates with an overall view of energy engineering, while offering specialization in a selected area through a research project.

3. To prepare students for potential future PhD research.

Learning Outcomes

Students will be expected to have developed fundamental knwoledge on primary and secondary energy sources, on energy transformation, and on energy utilisation technologies. They will also have developed proficiencies in project management, in research skills, in team work, and in advanced calculation methods concerning energy technologies.

Graduates from this MPhil will be excellent candidates for doctoral study (at Cambridge and elsewhere) and for employment in a wide variety of jobs (for example: in industrial Research and Development departments; in policy-making bodies; in the utilities industry; in the manufacturing sector; in energy equipment manufacturing).

Format

The course is centred around taught courses in core areas, covering basic revision and skills needed (such as Communication and Organisational Skills, Mathematical and Computational Skills, Review of Basic Energy Concepts, and Research Topics), various energy technologies (such as Clean Fossil Fuels, Solar, Biofuels, Wind etc), and energy efficiency and systems level approaches.

Elective courses may be chosen from a broad range, which includes topics such as Turbulence, Acoustics, Turbomachinery, Nuclear Power Engineering, Solar Panels, and Energy Efficiency in Buildings. Elective courses are delivered mainly by the Department of Engineering with input from the Department of Chemical Engineering and other departments in Cambridge.

Research projects are chosen from a list offered by members of staff and are linked to the principal areas of energy research in the respective departments.

Students can expect to receive reports at least termly on the Cambridge Graduate Supervision Reporting System. They will receive comments on items of coursework, and will have access to a University supervisor for their dissertation. All students will also have personal access to the Course Director and the other staff delivering the course.

Assessment

Students taking 12 elective modules will write a short thesis (up to 10,000 words). Students taking 10 elective modules will write a long thesis (up to 20,000 words). In both cases, 10% of the marks will be assigned through a pre-submission presentation, and 10% of the marks will be assigned through a post-submission presentation.

Students will take 5 core modules, and then either 5 elective modules (and a long thesis) or 7 elective modules (and a short thesis). All core modules are examined purely by coursework. Some of the elective modules are also examined wholly or partly by coursework.

Some of the elective modules are examined wholly or partly by written examination.

At the discretion of the Examiners, candidates may be required to take an additional oral examination on the work submitted during the course, and on the general field of knowledge within which it falls.

Continuing

Students wishing to apply for continuation to the PhD would normally be expected to attain an overall mark of 70%.

How to apply: http://www.graduate.study.cam.ac.uk/applying

Funding Opportunities

There are no specific funding opportunities advertised for this course. For information on more general funding opportunities, please follow the link below.

General Funding Opportunities http://www.graduate.study.cam.ac.uk/finance/funding

Read less
World-class microbiological research takes place in Newcastle in medical sciences, biological sciences, and civil engineering and geosciences. Read more
World-class microbiological research takes place in Newcastle in medical sciences, biological sciences, and civil engineering and geosciences. We welcome MPhil research proposals in all three of these fields. We are well funded and this creates a vibrant and dynamic environment for postgraduate study.

We offer MPhi supervision in:

Medical sciences

The Centre of Bacterial Cell Biology researches fundamental aspects of the cell biology and biochemistry of bacteria, providing scientific insights crucial for the discovery and development of new antibiotics, as well as providing solutions to a huge range of industrial and environmental problems. Other research interests include:
-Chromosome replication and segregation
-Transcription and translation
-Protein structure, function and engineering
-Cell envelope, growth and division
-Synthetic biology, development and gene regulation
-Bacterium-host interactions

Biological sciences

The Applied and Environmental Microbiology Group researches:
-Microbial biology in a range of habitats
-Discovery of natural products, eg antibiotics
-Reduction of food spoilage
-Production of biofuels, bioremediation of polluted environments
-Pathogens and host–pathogen interactions in a range of diseases including those in plants and coral reefs

Civil engineering and geosciences

The multidisciplinary research of Civil Engineering and Geosciences contributes fundamental advances in:
-Microbial ecology
-Environmental microbiology
-Environmental engineering and Earth systems
-Biogeochemistry
-Microbiological aspects of engineered and natural environments
-Anaerobic crude oil degradation in petroleum reservoirs
-Engineered biological treatment systems
-The microbial ecology of climatically significant processes such as methane cycling

Read less
This research course focuses on advanced concepts and technologies related to the molecular basis of plant and microbe functions. Read more

This research course focuses on advanced concepts and technologies related to the molecular basis of plant and microbe functions.

The backbone of the MRes in Molecular Plant and Microbial Sciences is a 12-month period of research starting in the first week of October.

It consists of two research projects performed in research groups focusing on plant genetic engineering, plant development, plant molecular biology, proteomics, plant biochemistry, plant-microbe interactions, transcriptomics and bioinformatics.

Career opportunities continue to expand as the potential of plant biotechnology is realised by employers, research companies and governments. A high proportion of our graduates are expected to enter further research leading to a PhD degree. There may be opportunities to join one of the Research Council-funded institutes, which develop and monitor a range of aspects of plant biotechnology.

Some graduates may gain employment in the food industry and agrochemical companies, which are increasingly focused on modern approaches to plant breeding. New developments in biofuels research offer future employment opportunities.

Further information

For full information on this course, including how to apply, see: http://www.imperial.ac.uk/study/pg/life-sciences/molecular-plant-microbial-sciences/

If you have any enquiries you can contact our team at:



Read less

Show 10 15 30 per page



Cookie Policy    X