• Northumbria University Featured Masters Courses
  • Birmingham City University Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of Bristol Featured Masters Courses
  • Cardiff University Featured Masters Courses
  • University of Northampton Featured Masters Courses
  • University of Surrey Featured Masters Courses
King’s College London Featured Masters Courses
University of Warwick Featured Masters Courses
Birmingham City University Featured Masters Courses
Queen Mary University of London Featured Masters Courses
Ulster University Featured Masters Courses
"bioengineering"×
0 miles

Masters Degrees (Bioengineering)

We have 87 Masters Degrees (Bioengineering)

  • "bioengineering" ×
  • clear all
Showing 1 to 15 of 87
Order by 
The Medical Physics and Bioengineering MRes provides structured training in this diverse and multi-disciplinary field and students may subsequently progress to an MPhil/PhD as part of a Doctoral Training Programme. Read more
The Medical Physics and Bioengineering MRes provides structured training in this diverse and multi-disciplinary field and students may subsequently progress to an MPhil/PhD as part of a Doctoral Training Programme.

See the website http://www.ucl.ac.uk/prospective-students/graduate/taught/degrees/medical-physics-bioengineering-mres

Key Information

- Application dates
All applicants:
Open: 5 October 2015
Close: 29 July 2016

English Language Requirements

If your education has not been conducted in the English language, you will be expected to demonstrate evidence of an adequate level of English proficiency.
The English language level for this programme is: Standard
Further information can be found on http://www.ucl.ac.uk/prospective-students/graduate/life/international/english-requirements .

International students

Country-specific information, including details of when UCL representatives are visiting your part of the world, can be obtained from http://www.ucl.ac.uk/prospective-students/international .

Degree Information

The programme covers all forms of ionising and non-ionising radiation commonly used in medicine and applies it to the areas of imaging and treatment. The programme involves Master's level modules chosen from a wide range offered by the department and a research project. Good performance in the MRes will lead to entry into the 2nd year of the Doctoral Training Programme where the research project is continued.

Students undertake modules to the value of 180 credits.

The programme consists of four optional modules and a research project.

- Core Modules
There are no core modules for this programme.

- Options
Students choose four optional modules from the following:
Ionising Radiation Physics: Interactions and Dosimetry
Medical Imaging
Clinical Practice
Treatment with Ionising Radiation
Medical Electronics and Control
Bioengineering
Optics in Medicine
Computing in Medicine
Medical Devices and Applications
Foundations and Anatomy and Scientific Computing
Image Processing
Computational Modelling in Biomedical Imaging
Programming Foundations for Medical Image Analysis
Information Processing in Medical Imaging
Image-Directed Analysis and Therapy

- Dissertation/report
All students undertake a research project.

Further information on modules and degree structure available on the department web site Medical Physics and Bioengineering MRes http://www.ucl.ac.uk/medphys/prospective-students/phd/dtp

Funding

Scholarships relevant to this department are displayed (where available) below. For a comprehensive list of the funding opportunities available at UCL, including funding relevant to your nationality, please visit the Scholarships and Funding website http://www.ucl.ac.uk/prospective-students/scholarships .

Careers

Our graduates typically find work in academia, the NHS, and in industry

Why study this degree at UCL?

The department is one of the largest medical physics and bioengineering departments in Europe, with links to a large number of active teaching hospitals. We have arguably the widest range of research of any similar department, and work closely with other world-leading institutions.

Students on the programme will form part of an interactive network of researchers across many disciplines and will benefit from the strengths of UCL in the healthcare field.

Student / staff ratios › 144 staff including 110 postdocs › 107 taught students › 135 research students

Application and next steps

- Applications
Students are advised to apply as early as possible due to competition for places. Those applying for scholarship funding (particularly overseas applicants) should take note of application deadlines.

- Who can apply?
The programme is suitable either for students wishing to study for a stand-alone MRes in Medical Physics & Bioengineering or for students planning progression to a Doctoral Training Programme.

What are we looking for?
When we assess your application we would like to learn:
- why you want to study Medical Physics and Bioengineering at graduate level
- why you want to study Medical Physics and Bioengineering at UCL
- what particularly attracts you to this programme
- how your personal, academic and professional background meets the demands of a challenging programme
- where you would like to go professionally with your degree

Together with essential academic requirements, the personal statement is your opportunity to illustrate whether your reasons for applying to this programme match what the programme will deliver.

For more information see the Applications page http://www.ucl.ac.uk/prospective-students/graduate/apply .

Read less
Developed to prepare students for a bioengineering research career, this course equips you to analyse and solve problems using an integrated, multidisciplinary approach. Read more

Developed to prepare students for a bioengineering research career, this course equips you to analyse and solve problems using an integrated, multidisciplinary approach.

The Department offers a one-year full-time MRes in Bioengineering, which has been developed to prepare students for a research career in bioengineering.

The course involves lectures and practical work in the first term, followed by full-time work on a research project. A variety of seminars and workshops are provided to deepen and broaden students’ research skill base.

The course will prepare you to analyse and solve problems in bioengineering using an integrated, multidisciplinary approach.

You can also take this course as the first year of a four-year PhD programme. For further details contact the postgraduate administrator at: .

Careers

Our Master's course provides a solid foundation for those who go on to study for a PhD. The Department of Bioengineering works closely with industry to ensure courses are designed to equip graduates with technical knowledge, expertise and transferable skills valued in the workplace.

Whether you intend to take your studies forward and pursue a PhD or move in to the world of work, this Master's degree will ensure you have the knowledge and skills to do so.

Further information

For full information on this course, including how to apply, see: http://www.imperial.ac.uk/study/pg/bioengineering/bioengineering-mres/



Read less
The MSc in Bioengineering provides education and training to the next generation of biomedical engineers. Bioengineering is defined as the application of the principles of engineering to advancements in healthcare and medicine. Read more
The MSc in Bioengineering provides education and training to the next generation of biomedical engineers. Bioengineering is defined as the application of the principles of engineering to advancements in healthcare and medicine. Some of the most exciting work in biomedical engineering today takes place at the intersection of disciplines where the biological, physical and digital worlds intersect and have an impact on the human condition.

Students of the MSc in Bioengineering in Trinity College Dublin take lectures from experts in a variety of biomedical engineering subjects and carry out research in world class, state of the art research laboratories and facilities.

Students of the MSc in Bioengineering have the opportunity to specialise in one of three key research themes - neural engineering, tissue engineering and medical device design.

The MSc in Bioengineering with specialisation in Neural Engineering aims to provide students with the education needed to undertake neural engineering in research and clinical environments. Students receive a focused education on the key subjects of neural engineering such as Neural Signal Analysis, Implantable Neural Systems and Neuroimaging Technologies. Neural engineering has generated considerable scientific and clinical opportunities, not only for the development of interfaces between the brain and computers but also for its mostly untapped potential to help understand neurological disorders such as Parkinson's Disease or psychiatric disorders such as schizophrenia.

The MSc in Bioengineering with specialisation in Medical Device Design is designed to bring together clinicians, researchers and the medical device industry to produce new solutions for clinical needs. The field of medical device research is a fast moving area which can offer students a rewarding career in the global medical device market. Students will gain a specific education of the key topics in medical device design process and a knowledge of medical device regulation.

The MSc in Bioengineering with specialisation in Tissue Engineering provides students with an understanding of stem cells, animal/human cell culture processes, and strategies to regenerate or repair damaged tissues. This exiting multidisciplinary field of research holds significant potential in the treatment of many diseases and disorders.

Read less
The course aims to provide science or engineering graduates from a diversity of backgrounds with a solid grounding in modern bioengineering technologies, together with options to develop an emphasis in biomechanics and biomaterials, bioimaging and biosensing and digital modelling of various human systems which will prepare students for a career in an industrial, clinical or research environment. Read more
The course aims to provide science or engineering graduates from a diversity of backgrounds with a solid grounding in modern bioengineering technologies, together with options to develop an emphasis in biomechanics and biomaterials, bioimaging and biosensing and digital modelling of various human systems which will prepare students for a career in an industrial, clinical or research environment.

This course is one of a suite of four closely related bioengineering masters courses that comprise of a common core with the ability to focus on specific aspects of bioengineering.
The course has a broader scope than the three related courses, allowing students to select modules related to biomaterials, biomechanics, imaging and sensing and digital modelling.

This course may be appropriate for students who have yet to decide which area of bioengineering they wish to focus on. The principles of the course are highly relevant to the established medical device sector, the biotechnology and the emerging regenerative medicine industry.

This multidisciplinary masters covers practical and theoretical aspects of bioengineering, including:
-cell-biomaterial surface interactions
-materials characterisation
-functionalisation of surface
-biomechanics and mathematical modelling

Read less
This course aims to provide science or engineering graduates from a diversity of backgrounds with a solid grounding in modern bioengineering technologies, together with a strong emphasis in biomechanics and biomaterials. Read more
This course aims to provide science or engineering graduates from a diversity of backgrounds with a solid grounding in modern bioengineering technologies, together with a strong emphasis in biomechanics and biomaterials. This course will prepare students for a career in an industrial, clinical or research environment, independent learning, and postgraduate research or careers in industry or hospitals.

This course is one of a suite of four closely related bioengineering masters courses that comprise of a common core with the ability to focus on specific aspects of bioengineering.

The course covers material optimisation and engineering of biomedical devices while addressing biological considerations to optimise device performance. Such an approach has a wide application range, incorporating transitory invasive devices to permanent implants for repair, replacement and regenerative treatments. The principles of the course are highly relevant to both the established medical device sector and the emerging regenerative
medicine industry.

This multidisciplinary MSc covers practical and theoretical aspect of bioengineering, including:
-cell-biomaterial surface interactions
-materials characterisation
-functionalisation of surface
-biomechanics and mathematical modelling

Read less
This exciting interdisciplinary MSc programme focuses on providing advanced academic training in the cellular and molecular processes that relate to the production of biomedicines for use in healthcare. Read more

This exciting interdisciplinary MSc programme focuses on providing advanced academic training in the cellular and molecular processes that relate to the production of biomedicines for use in healthcare.

This is coupled with rigorous practical training in the design, production and characterisation of biomolecules using state-of-theart biotechnological and bioengineering analytical and molecular technologies.

You acquire practical, academic and applied skills in data analysis, systems and modelling approaches, and bioinformatics, together with transferable skills in scientific writing, presentation and public affairs. On successful completion of the programme, you will be able to integrate these skills to develop novel solutions to modern biotechnological issues from both academic and industrial perspectives.

Visit the website: https://www.kent.ac.uk/courses/postgraduate/213/biotechnology-and-bioengineering

About the School of Biosciences

The School of Biosciences is among the best-funded schools of its kind in the UK, with current support from the BBSRC, NERC, MRC, Wellcome Trust, EU, and industry. It has 38 academic staff, 56 research staff (facility managers, research fellows, postdoctoral researchers and technicians), approximately 100 postgraduate students and 20 key support staff. The school's vibrant atmosphere has expanded to become a flourishing environment to study for postgraduate degrees in a notably friendly and supportive teaching and research environment.

Research in the School of Biosciences revolves around understanding systems and processes in the living cell. It has a strong molecular focus with leading-edge activities that are synergistic with one another and complementary to the teaching provision. Our expertise in disciplines such as biochemistry, microbiology and biomedical science allows us to exploit technology and develop groundbreaking ideas in the fields of genetics, molecular biology, protein science and biophysics. Fields of enquiry encompass a range of molecular processes from cell division, transcription and translation through to molecular motors, molecular diagnostics and the production of biotherapeutics and bioenergy.

In addition to research degrees, our key research strengths underpin a range of unique and career-focused taught Master’s programmes that address key issues and challenges within the biosciences and pharmaceutical industries and prepare graduates for future employment.

Course structure

The MSc in Biotechnology and Bioengineering involves studying for 120 credits of taught modules, as indicated below. The taught component takes place during the autumn and spring terms, while a 60-credit research project take place over the summer months.

The programme is taught by staff from the Industrial Biotechnology Centre, an interdisciplinary research centre whose aim is to solve complex biological problems using an integrated approach to biotechnology and bioengineering. It is administered by the School of Biosciences who also contribute to the programme.

Modules

The following modules are indicative of those offered on this programme. This list is based on the current curriculum and may change year to year in response to new curriculum developments and innovation. Most programmes will require you to study a combination of compulsory and optional modules. You may also have the option to take modules from other programmes so that you may customise your programme and explore other subject areas that interest you.

BI830 - Science at Work (30 credits)

BI836 - Practical and Applied Research Skills for Advanced Biologists (30 credits)

BI851 Advanced Molecular Processing for Biotechnologists and Bioengineers  (30 credits)

BI852 - Advanced Analytical and Emerging Technologies for Biotechnology and Bio (30 credits)

BI857 - Cancer Research in Focus (15 credits)

CB612 - New Enterprise Startup (15 credits)

CB613 - Enterprise (15 credits)

BI840 - Cancer Therapeutics: From the Laboratory to the Clinic (15 credits)

BI845 - Research project (60 credits)

Assessment

Assessment is by coursework and the research project.

Programme aims

You will gain the following transferable skills:

- the ability to plan and manage workloads

- self-discipline and initiative

- the development of reflective learning practices to make constructive use of your own assessment of performance and use that of colleagues, staff and others to enhance performance and progress

- communication: the ability to organise information clearly, create and respond to textual and visual sources (eg images, graphs, tables), present information orally, adapt your style for different audiences.

- enhanced understanding of group work dynamics and how to work as part of a group or independently.

Research areas

Research in the School of Biosciences is focused primarily on essential biological processes at the molecular and cellular level, encompassing the disciplines of biochemistry, genetics, biotechnology and biomedical research.

The School houses a dynamic research community with five major research themes:

  • industrial biotechnology
  • infection and drug resistance
  • cancer and age-related diseases
  • cellular architecture and dynamics
  • reproduction, evolution and genomics

Each area is led by a senior professor and underpinned by excellent research facilities. The School-led development of the Industrial Biotechnology Centre (IBC), with staff from the other four other schools in the Faculty of Sciences, facilitates and encourages interdisciplinary projects. The School has a strong commitment to translational research, impact and industrial application with a substantial portfolio of enterprise activity and expertise.

Careers

A postgraduate degree in the School of Biosciences is designed to equip our graduates with transferable skills that are highly valued in the workplace. Our research-led ethos ensures that students explore the frontiers of scientific knowledge, and the intensive practical components provide rigorous training in cutting edge technical skills that are used in the modern biosciences while working in areas of world-leading expertise within the School.

Destinations for our graduates include the leading pharmaceutical and biotechnological companies within the UK and leading research institutes both at home and abroad.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/how-to-apply/



Read less
Our master’s program in bioengineering combines coursework in engineering theory, life sciences, and entrepreneurship to give you the analytical and practical tools to succeed in the biotechnology and bioengineering industries. Read more

Our master’s program in bioengineering combines coursework in engineering theory, life sciences, and entrepreneurship to give you the analytical and practical tools to succeed in the biotechnology and bioengineering industries. We incorporate both didactic classroom lecture and laboratory experience, infusing discipline-specific topics with hands-on research, workshops with leaders in the field, and professional networking opportunities.

The M.S. in Bioengineering focuses on the theory and development of medical devices and its practical application in the creation of new and novel devices. It is suitable for students with a variety of backgrounds including engineering, life sciences, and medicine.

Admission

Thanks for your interest in the Bioengineering, M.S. program.



Read less
Core modules. Compulsory modules on research methodology and research practice. Innovation, Management and Research Methods (15 credits). Read more
Core modules

Compulsory modules on research methodology and research practice
Innovation, Management and Research Methods (15 credits)
Bioengineering Research Method (15 credits)
Biomedical Engineering Principles (15 credits)
Biomedical Statistics (15 credits)
Dissertation (90 credits)

Optional modules

The two optional modules for each of the four offered streams are designed to suit students of different backgrounds. The optional modules are all designed to enhance the students’ knowledge or fill the student knowledge gaps on specific disciplines of bioengineering so that students are enabled to perform high quality research.

Stream A
Biomedical Imaging and Image Processing (15 credits)
Control Theory for Bioengineering (15 credits)

Stream B
Biofluid Mechanics (15 credits)
Advanced Biofluid Mechanical Research (15 credits)

Stream C
Biomechanics and Biomaterials (15 credits)
Tissue Engineering and Regenerative Medicine (15 credits)

Stream D
Advanced Separation Science and Industrial Case Studies (15 credits)
Process Instrumentation and Practice (15 credits)

The dissertation module starts early in the first year and last through the entire year. Students may not decide the specific dissertation title at the beginning of the year, but the desired research area (stream). The students can decide on the specific dissertation title at mid-term when they have gained further knowledge about the stream subject area. However, the intensive research activities only start from the second term once the exam period for the first term modules has finished.

Read less
Research profile. The Institute for Bioengineering (IBioE) connects Engineering, Physical Sciences, Biology and Medicine, for innovative diagnostic and therapeutic biomedical devices and technologies. Read more

Research profile

The Institute for Bioengineering (IBioE) connects Engineering, Physical Sciences, Biology and Medicine, for innovative diagnostic and therapeutic biomedical devices and technologies.

Research themes include:

Synthetic Biology - to design and construct (e.g. to ‘engineer’) biological devices and systems, often at cellular level. Applications range from therapeutic to environmental.

Tissue Engineering - the production of 3D or 2D scaffolds or guidance cues for biological cells. Applications are largely therapeutic and also include new forms of lab-on-chip technology.

Biomedical Modelling and Measurement - understanding biological materials through modelling and measurement for applications in, for example, prosthetics, prediction of failure in blood vessels and the behaviour of bone with ageing. We also study the behaviour of biological materials experimentally and in most cases, non-invasively (e.g. via Raman and CARS spectroscopy).

Biomedical Devices and Sensors - working with colleagues in chemistry, we develop sensors on silicon for simple biological parameters (e.g. oxygen concentration) along with sensors of specific biomarkers of disease and therapy.

Training and support

The development of transferable skills is a vital part of postgraduate training and a vibrant, interdisciplinary training programme is offered to all research students by the University’s Institute for Academic Development (IAD). The programme concentrates on the professional development of postgraduates, providing courses directly linked to postgraduate study.

Courses run by the IAD are free and have been designed to be as flexible as possible so that you can tailor the content and timing to your own requirements.

Our researchers are strongly encouraged to present their research at conferences and in journal during the course of their PhD.

Every year, the Graduate School organises a Postgraduate Research Conference to showcase the research carried out by students across the Research Institutes

Our researchers are also encouraged and supported to attend transferable skills courses provided by organisations such as the Engineering and Physical Sciences Research Council (EPSRC).

Masters by Research

An MSc by Research is based on a research project tailored to a candidate’s interests. It lasts one year full time or two years part time. The project can be a shorter alternative to an MPhil or PhD, or a precursor to either – including the option of an MSc project expanding into MPhil or doctorate work as it evolves. It can also be a mechanism for industry to collaborate with the School.



Read less
Course description. This exciting, two year MSc programme is concerned with a wide range of biomedical imaging and sensing science and technology. Read more

Course description

This exciting, two year MSc programme is concerned with a wide range of biomedical imaging and sensing science and technology. Biomedical Imaging and Sensing is, in a broad sense, a set of competencies from engineering and sciences to support future quantitative biology and personalised medicine.

It will provide you with theoretical and practical knowledge to develop methods and systems for disease understanding, diagnosis, prognosis and therapeutics where imaging and sensing play a key role.

Core modules

  • Interdisciplinary Seminars in Biomedical Imaging and Sensing
  • Mathematics of Imaging Sciences
  • Scientific Software Development for Biomedical Imaging

Departmental optional modules

  • Advanced Signal Processing
  • Computer Vision, Biomedical Signals and Systems
  • Physiological Signals and Sensing; Physics of Light Microscopy of Cells and Tissues
  • Physics of Medical Imaging with Ionising Radiation
  • Physical Principles of Imaging: Radiation-Matter Interaction
  • Medical Image Computing
  • Bioimaging with Light and Sound
  • Microscopy Image Analysis
  • Magnetic Resonance Imaging and Spectroscopy

Interdisciplinary optional modules

The programme allows you to explore some elective modules from interdisciplinary domains that relate to anatomy, physiology, cell biology, physics of the senses, and vision and neurosciences, among others.

Teaching and assessment

Research-led teaching from our department, and various interdisciplinary modules from other departments from the Faculty of Engineering and the Faculty of Medicine, Health and Dentistry.

Individual support for your research project and dissertation.

Assessment is by examination, a project, and coursework in the first year with future examinations and dissertation in your second year.



Read less
The one-year MRes Medical Device Design and Entrepreneurship is a unique programme which combines development of medical devices and biomedical engineering knowledge, alongside entrepreneurship skills. Read more

The one-year MRes Medical Device Design and Entrepreneurship is a unique programme which combines development of medical devices and biomedical engineering knowledge, alongside entrepreneurship skills.

The focus is on the intricate and unique field of medical device development and the key entrepreneurship and management skills required to get the device to market, from concept to business planning and market emergence.

In addition to specific training in medical device entrepreneurship, you will also develop research and analytical skills related to bioengineering. This provides a solid foundation for those intending to go into industry or on to study for a PhD.

This is a very hands-on course, with much of the training and assessment based around a year-long project aimed at developing an engineering developmental and start-up business plan around a medical device concept.

The programme is supplemented by a small amount of formal teaching, and a requirement to attend at least one seminar per week throughout the first two terms in the Department of Bioengineering.

Careers

This MRes was the first of its kind in the UK and aims to ensure the development of advanced medical devices.

Our course prepares you for an innovative research career in Bioengineering. The practical nature of the course, and the key training in business skills, sees you well-placed to seek a career in this area.

You are equally well-prepared to pursue further study and research at PhD level, with the research project element of this course accounting for three-quarters of the assessment.

Further information

For full information on this course, including how to apply, see: http://www.imperial.ac.uk/study/pg/bioengineering/medical-device-design-mres/

If you have any enquiries you can contact our team at:



Read less
Our one-year full-time MSc in Human and Biological Robotics is a wide-ranging course covering robotics for humans and society, service and social robotics, rehabilitation technology, as well as machine vision, artificial intelligence and machine learning. Read more

Our one-year full-time MSc in Human and Biological Robotics is a wide-ranging course covering robotics for humans and society, service and social robotics, rehabilitation technology, as well as machine vision, artificial intelligence and machine learning.

It focuses on the understanding of neuromechanics, biomimetics design, signal and image processing and the application of robotics in health and everyday life.

This new Master's course has a unique focus on engineering methods which investigate human and animal sensing and sensorimotor control, and on the design of biomimetic systems and assistive devices for humans. It builds upon the unique strengths of the Department of Bioengineering and the wider College in this new field. 

You will be well supported by the Imperial Robotics Forum, which groups together robotics researchers at Imperial doing multidisciplinary research at the cutting edge of several disciplines. 

The course is taught by the Department of Bioengineering, where you will spend most of your study time, with additional input from the Departments of Aeronautics, Computing, Electrical and Electronic Engineering, Mechanical Engineering, and the Dyson School of Design Engineering.

Careers

You will follow an exciting programme of study at the forefront of an emerging discipline, which aims to ensure graduates develop a deep understanding of human and biological robotics.

There is also an emphasis entrepreneurship and collaboration with other disciplines, which makes sure graduates are highly employable across many types of organisations.

Our graduates are well placed for the following fields:

  • Further research in universities, research institutes, industry and healthcare
  • Design and production (of medical devices and biomimetic systems)
  • Freelancing, entrepreneurship and start-ups
  • Technical and commercial consulting

Further information

For full information on this course, including how to apply, see: http://www.imperial.ac.uk/study/pg/bioengineering/human-and-biological-robotics-msc/

If you have any enquiries you can contact our team at: http://www.imperial.ac.uk/study/pg/bioengineering/human-and-biological-robotics-msc/



Read less
The Musculoskeletal Science MSc covers a broad spectrum of musculoskeletal topics, including basic science and clinical aspects. Read more

The Musculoskeletal Science MSc covers a broad spectrum of musculoskeletal topics, including basic science and clinical aspects. It aims to give students, in a multidisciplinary setting, a holistic view of musculoskeletal science, orthopaedic bioengineering and medicine, and provides an in-depth knowledge of specific areas appropriate to each student's individual interests.

About this degree

Students on this MSc programme acquire essential scientific knowledge, improve their basic research skills, and are equipped with the ability to solve the musculoskeletal problems emphasised within the NHS framework. The programme emphasises the four major areas as identified by the Bone and Joint Decade - arthritis, osteoporosis, trauma and spinal disorders, and transferable skills and research methodology in orthopaedic bioengineering.

Students undertake modules to the value of 180 credits. The programme consists of eight taught modules (120 credits), and a research project (60 credits).

Students will be awarded an MSc on successful completion of all taught modules and research project; a Postgraduate Diploma on successful completion of eight taught modules (all core modules plus any four from options); and a Postgraduate Certificate on successful completion of four taught modules.

A Postgraduate Diploma (120 credits, full-time nine months and flexible study up to five years) is offered.

A Postgraduate Certificate (60 credits, full-time three months and flexible study up to two years) is offered.

Core modules

  • Clinical Aspects of Musculoskeletal Medicine and Surgery, Part I
  • Musculoskeletal Tissue Biology - Form and Function
  • Musculoskeletal Biomechanics and Biomaterials, Part I
  • Research Methodology and Generic Skills

Optional modules

Up to 60 credits of optional modules (4 modules) drawn from the following:

  • Clinical Aspects of Musculoskeletal Medicine and Surgery, Part II
  • Musculoskeletal Tissue Biology - Disease and Dysfunction
  • Musculoskeletal Biomechanics and Biomaterials, Part II
  • Research Governance
  • Clinical Experience in Musculoskeletal Surgery
  • Surgical Skills in Orthopaedic Surgery

Dissertation/report

All MSc students undertake an independent research project that will contribute to cutting-edge scientific, clinical and industrial research, and culminates in a dissertation and oral examination.

Teaching and learning

The programme is delivered through a combination of taught lectures, seminars, tutorials, group project work and workshops. Assessment is through online MCQs, coursework, and the dissertation and viva voce. Candidates are examined in the year in which they complete the programme.

The programme will be taught mostly at the Royal National Orthopaedic Hospital in Stanmore, London. Some teaching will also take place in Bloomsbury.

Further information on modules and degree structure is available on the department website: Musculoskeletal Science MSc

Careers

This programme offers students from a wide variety of disciplines the opportunity to gain a higher degree in an exciting and rapidly developing field, and equips them to make a strong contribution to the development of musculoskeletal services. The students can develop their careers in the healthcare sector, medical device industry and bio-industry, regenerative medicine, regulatory bodies, as well as the academic community.

Recent career destinations for this degree

  • PhD, University of Oxford
  • Occupational Therapy Assistant, Watford General Hospital (NHS)
  • Orthopaedic Surgeon, Assaswa International Hospital
  • Medical Research on Replacement Joints, Cardiff University (Prifysgol Caerdydd)

Careers data is taken from the ‘Destinations of Leavers from Higher Education’ survey undertaken by HESA looking at the destinations of UK and EU students in the 2013–2015 graduating cohorts six months after graduation.

Why study this degree at UCL?

The Division of Surgery & Interventional Science is part of one of the most prestigious medical schools in Europe, with a team of nearly 400 people, from surgeons, biologists, bioengineers and material scientists and oncologists, to clinical trials specialists and researchers. Our aim is to understand the causes of human musculoskeletal disease and develop innovative therapies and technology to improve the quality of life.

Students on this MSc will gain an unparalleled grounding in musculoskeletal science and orthopaedic bioengineering, including a holistic view of clinical care as well as orthopaedic sciences and bioengineering. The programme is run at the internationally renowned Royal Orthopaedic Hospital in Stanmore.

Research Excellence Framework (REF)

The Research Excellence Framework, or REF, is the system for assessing the quality of research in UK higher education institutions. The 2014 REF was carried out by the UK's higher education funding bodies, and the results used to allocate research funding from 2015/16.

The following REF score was awarded to the department: Division of Surgery & Interventional Science

80%: Clinical Medicine subjects; 95%: General Engineering subjects rated 4* (‘world-leading’) or 3* (‘internationally excellent’)

Learn more about the scope of UCL's research, and browse case studies, on our Research Impact website.



Read less
The Musculoskeletal Science MSc covers a broad spectrum of musculoskeletal topics, including basic science and clinical aspects. Read more

The Musculoskeletal Science MSc covers a broad spectrum of musculoskeletal topics, including basic science and clinical aspects. It aims to give students, in a multidisciplinary setting, a holistic view of musculoskeletal science, orthopaedic bioengineering and medicine, and provides an in-depth knowledge of specific areas appropriate to each student's individual interests.

About this degree

Students on this MSc programme acquire essential scientific knowledge, improve their basic research skills, and are equipped with the ability to solve the musculoskeletal problems emphasised within the NHS framework. The programme emphasises the four major areas as identified by the Bone and Joint Decade - arthritis, osteoporosis, trauma and spinal disorders, and transferable skills and research methodology in orthopaedic bioengineering.

Students undertake modules to the value of 180 credits.

The programme consists of four core modules (60 credits), four optional modules (60 credits) and a research project (60 credits).

A Postgraduate Diploma (120 credits, full-time nine months and flexible study up to five years) is offered.

A Postgraduate Certificate (60 credits, full-time three months and flexible study up to two years) is offered.

Core modules

  • Clinical Aspects of Musculoskeletal Medicine and Surgery, Part I
  • Musculoskeletal Tissue Biology - Form and Function
  • Musculoskeletal Biomechanics and Biomaterials, Part I
  • Research Methodology and Generic Skills

Optional modules

Up to 60 credits of optional modules (four modules) drawn from the following:

  • Clinical aspects of Musculoskeletal Medicine and Surgery, Part II
  • Musculoskeletal Biology, Part II
  • Musculoskeletal Biomechanics and Biomaterials, Part II
  • Musculoskeletal Epidemiology and Research Methodology, Part II
  • Clinical Experience in Musculoskeletal Surgery

Dissertation/report

All MSc students undertake an independent research project, which can be carried out at their own institution or hospital, and culminates in a dissertation and oral examination. The project thesis has an upper word limit of 12,000 words (40-50 pages). 

Teaching and learning

The programme is delivered through a combination of web-based taught lectures, seminars, tutorials, online research forum, group project work and workshops. Assessment is through unseen written examination, coursework, and the dissertation and viva voce. Candidates are examined in the year in which they complete the programme.

Further information on modules and degree structure is available on the department website: Musculoskeletal Science (by Distance Learning) MSc

Careers

This programme offers students from a wide variety of disciplines the opportunity to gain a higher degree in an exciting and rapidly developing field, and equips them to make a strong contribution to the development of musculoskeletal services. The students can develop their careers in the healthcare sector, medical device industry and bio-industry, regenerative medicine, regulatory bodies, as well as the academic community.

Recent career destinations for this degree

  • Trauma and Orthopaedics, NHS Bradford Teaching Hospitals NHS Foundation Trust and studying Engineering, Open University

Careers data is taken from the ‘Destinations of Leavers from Higher Education’ survey undertaken by HESA looking at the destinations of UK and EU students in the 2013–2015 graduating cohorts six months after graduation.

Why study this degree at UCL?

The UCL Division of Surgery & Interventional Science is part of one of the most prestigious medical schools in Europe, with a team of nearly 400 people, from surgeons, biologists, bioengineers and material scientists and oncologists to clinical trials specialists and researchers. Our aim is to understand the causes of human musculoskeletal disease and develop innovative therapies and technology to improve the quality of life of the people around us.

Students on this MSc will gain an unparalleled grounding in musculoskeletal science and orthopaedic bioengineering including a holistic view of clinical care as well as orthopaedic sciences and bioengineering. The programme is run at the internationally renowned Royal Orthopaedic Hospital in Stanmore.

Research Excellence Framework (REF)

The Research Excellence Framework, or REF, is the system for assessing the quality of research in UK higher education institutions. The 2014 REF was carried out by the UK's higher education funding bodies, and the results used to allocate research funding from 2015/16.

The following REF score was awarded to the department: Division of Surgery & Interventional Science

80%: Clinical Medicine subjects; 95%: General Engineering subjects rated 4* (‘world-leading’) or 3* (‘internationally excellent’)

Learn more about the scope of UCL's research, and browse case studies, on our Research Impact website.



Read less
This MSc will equip you with state-of-the-art knowledge of biomaterials, bioengineering, tissue engineering, medical engineering and related management topics. Read more

This MSc will equip you with state-of-the-art knowledge of biomaterials, bioengineering, tissue engineering, medical engineering and related management topics. Delivered by experts from across UCL and eminent visiting lecturers from industry and medical charities, this interdisciplinary programme attracts physical sciences, engineering and life sciences graduates, including those with qualifications in medicine.

About this degree

You will develop an advanced knowledge of topics in biomaterials and tissue engineering alongside an awareness of the context in which healthcare engineering operates, in terms of safety, environmental, social and economic aspects. You will also gain a wide range of intellectual, practical and transferable skills necessary for a career in this field.

Students undertake modules to the value of 180 credits.

The programme consists of eight core modules (120 credits) and a research dissertation (60 credits).

Core modules

  • Biomaterials
  • Tissue Engineering
  • Biofluids and Medical Devices
  • Biomechanics and Biostructures
  • Applications of Biomedical Engineering
  • Bioengineering
  • Medical Imaging (ionising and non-ionising)
  • Evaluation and Planning of Business Opportunities

Optional modules

There are no optional modules for this programme.

Dissertation/report

Culminating in a substantial dissertation and oral presentation, the research project focuses your research interests and develops high-level presentation, critical thinking and problem-solving skills. The project can be based in any relevant UCL department.

Teaching and learning

This dynamic programme is delivered through lectures, tutorials, individual and group projects, and practical laboratory work. Assessment is through written, oral and viva voce examinations, the dissertation and coursework (including the evaluation of laboratory reports, technical and project reports, problem-solving exercises, assessment of computational and modelling skills, and oral presentations).

Further information on modules and degree structure is available on the department website: Biomaterials and Tissue Engineering MSc

Careers

There are many career opportunities and the programme is suitable for students wishing to become academics, researchers or professionals and for those pursuing senior management careers, in manufacturing or healthcare engineering

Recent career destinations for this degree

  • Dentist, Dental Life
  • Good Manufacturing Process Scientist, RMS (Regenerative Medical System)
  • Postgraduate Research Assistant, University of Cambridge
  • PhD in Biomaterials and Tissue Engineering, UCL
  • PhD in Surgery, UCL

Employability

Delivered by leading researchers from across UCL, as well as industrial experts, you will have plenty of opportunities to network and keep abreast of emerging ideas in biomaterials and tissue engineering. Collaborating with companies and bodies such as the NHS, JRI Orthopaedics and Orthopaedics Research (UK) is key to our success and you will be encouraged to develop networks through the programme itself and through the department’s careers programme which includes employer-led events and individual coaching. We equip our graduates with the skills and confidence needed to play a creative and leading role in the professional and research community.

Careers data is taken from the ‘Destinations of Leavers from Higher Education’ survey undertaken by HESA looking at the destinations of UK and EU students in the 2013–2015 graduating cohorts six months after graduation.

Why study this degree at UCL?

There are internationally renowned research groups in biomaterials and bioengineering in UCL Engineering and you will have access to a state-of-the-art research portfolio.

In recent years, UCL Mechanical Engineering has seen unprecedented activity in refurbishing and re-equipping our laboratories. For example, six new biomaterials and bioengineering laboratories have been set up with funding from the Royal Society and Wolfson Foundation. A new biomaterials processing and forming laboratory is also available in the Materials Hub in the Engineering Building.

The programme is also delivered by leading researchers across UCL's Division of Medicine, Eastman Dental Institute, the Institute of Biomedical Engineering and visiting experts from other UK organisations.

Research Excellence Framework (REF)

The Research Excellence Framework, or REF, is the system for assessing the quality of research in UK higher education institutions. The 2014 REF was carried out by the UK's higher education funding bodies, and the results used to allocate research funding from 2015/16.

The following REF score was awarded to the department: Mechanical Engineering

90%: Aeronautical, Mechanical, Chemical and Manufacturing Engineering subjects; 95%: General Engineering subjects rated 4* (‘world-leading’) or 3* (‘internationally excellent’)

Learn more about the scope of UCL's research, and browse case studies, on our Research Impact website.



Read less

Show 10 15 30 per page



Cookie Policy    X