• Imperial College London Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • University of York Featured Masters Courses
King’s College London Featured Masters Courses
University of Southampton Featured Masters Courses
University of Leeds Featured Masters Courses
University of Leeds Featured Masters Courses
Coventry University Featured Masters Courses
"beng"×
0 miles

Masters Degrees (Beng)

  • "beng" ×
  • clear all
Showing 1 to 15 of 161
Order by 
The MSc in Civil Engineering builds on our renowned research expertise and industrial experience in current aspects of Civil Engineering. Read more
The MSc in Civil Engineering builds on our renowned research expertise and industrial experience in current aspects of Civil Engineering. It is designed both for people pursuing a higher degree soon or immediately after obtaining their first degree, and for those with considerable work experience.

Why study Civil Engineering at Dundee?

Dundee is a pre-eminent centre for Civil Engineering with internationally-renowned research groups in concrete technology, fluid mechanics, geotechnical engineering, lightweight and deployable structures, and construction management.

Professional Accreditation: ICE/IStructE
This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. Visit the Joint Board of Moderators homepage for further information.

What's so good about Civil Engineering at Dundee?

All our MSc programmes are accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

Civil Engineering at Dundee is ranked top in Scotland for research. You will have the opportunity to engage with leading edge research at Dundee, meaning we attract students of the highest calibre and our graduates are highly sought after by employers worldwide. Students studying on our masters programmes benefit from our renowned research expertise and industry experience.

Who should study this course?

This course is designed both for people pursuing a higher degree soon or immediately after obtaining their first degree, and for those with considerable work experience.

The start date is September each year, and lasts for 12 months.

How you will be taught

Modules are taught via lectures and tutorials.

What you will study

The programme lasts a full year and contains three main elements: Core Modules (22%)These provide skills generic to engineering and research:

Research Methods and Diploma Project
Health, Safety & Environmental Engineering
Specialist Modules (45%) These provide in-depth and advanced knowledge, and build upon our recognised expertise in Civil Engineering. Students take any four specialist modules that are available that year, subject to approval of the programme director and timetabling constraints. Examples of current modules include:

Advanced Structural Analysis
Earthquake Engineering & Concrete Assessment
Innovative Structures
Design for Durability Assessment and Repair
Construction Systems I and II
Sustainable Use and Environmental Impact Assessment
Offshore Geotechnical Engineering
Advanced Soil Mechanics and Geo-Environmental Engineering
Soil Dynamics and Earthquake Engineering
Project and Enterprise Management
Research Project (33%)

This gives you the opportunity to benefit from, and contribute to our research. At the end of the project students submit a dissertation based on their research.

How you will be assessed

The course is assessed by coursework, examination and dissertation.

Careers

There is a continuing demand for civil engineers particularly in the energy and water sectors and the skills of the civil engineer are highly portable in the multi-disciplinary engineering sectors. The latest Institution of Civil Engineers Salary Survey for the UK (2010) indicates that the average total income of its senior members is nearly £100k, while that of recent graduates is £27.5k.

We are proud of our achievements in graduate employment. The blend of science, technology and management education and training gained in a unique learning environment that is both challenging and friendly, makes our graduates attractive to employers in civil engineering and a wider range of sectors.

Graduates from Dundee have gone on to achieve high level positions in most sectors of the profession. These include consulting engineers and contractors, the offshore industry and research organisations.

Read less
Professional engineering institutions now require engineers to have at least an MEng or MSc qualification for Chartered Engineer status. Read more
Professional engineering institutions now require engineers to have at least an MEng or MSc qualification for Chartered Engineer status. And with many high-tech engineering companies now operating pan-European and globally, Master's level qualifications are often considered essential for career development.

Key benefits

This course is accredited by the Institution of Mechanical Engineers (IMechE) , which confirms it meets standards set by the Engineering Council for Professional Engineering Competence (UK-SPEC).

Course detail

The MSc Mechanical Engineering is designed to allow BEng and BSc (Hons) Mechanical Engineering graduates, and those from related disciplines, to top up qualifications through the MSc-route equivalent of an MEng Mechanical Engineering. The Department of Engineering Design and Mathematics has a longstanding reputation for offering IMechE-accredited BEng (Hons) and MEng Mechanical Engineering degrees, alongside a range of MSc programmes in related specialised subjects.

Graduates with an in-depth understanding of engineering design and analysis, and the ability to appreciate the challenges of managing complex operations, are in high demand. This course is designed to meet that demand, and to bridge the skills and knowledge gaps for BEng or BSc graduates, and make them more employable. With its foundations in mechanical engineering, this course is a great opportunity to learn how to develop advanced solutions to engineering problems using the latest computer tools and simulations. It also addresses a need for people who work well in project teams, and an extended piece of independent research is a significant part of the course.

Modules

Core modules include:

• Modelling and Simulation
• Computer Vision and Modern Control
• Innovations in Operations Management
• Masters Group Project

Optional modules include:

• Design of Fluid Systems
• Structural Integrity in Design
• Industrial Applications of Vision and Automation
• Robotics Fundamentals
• Intelligent and Adaptive Systems

Assessment

Assessment is through a combination of examinations and coursework, and your dissertation project.

Careers / Further study

An accredited Master's degree in Mechanical Engineering provides an essential stepping stone for any mechanical engineer aspiring to take their career to the highest level. Mechanical engineers are vital to society and the economy. For example, they're often involved in making maximum use of high-capital plants and operations such as power stations, oil refineries, chemical plants and hospitals.

How to apply

Information on applications can be found at the following link: http://www1.uwe.ac.uk/study/applyingtouwebristol/postgraduateapplications.aspx

Funding

- New Postgraduate Master's loans for 2016/17 academic year –

The government are introducing a master’s loan scheme, whereby master’s students under 60 can access a loan of up to £10,000 as a contribution towards the cost of their study. This is part of the government’s long-term commitment to enhance support for postgraduate study.

Scholarships and other sources of funding are also available.

More information can be found here: http://www1.uwe.ac.uk/students/feesandfunding/fundingandscholarships/postgraduatefunding.aspx

Read less
This course is for engineers who wish to develop their skills and knowledge in energy systems that will meet future energy needs. Read more
This course is for engineers who wish to develop their skills and knowledge in energy systems that will meet future energy needs. Such energy systems will need to be designed and implemented in accordance with principles of sustainability.

The course content is designed to be relevant to international, national and local government energy policies and strategies, and will be of value to anyone working in an energy related engineering discipline. The primary focus of the course is for graduates in building services, mechanical, electrical and chemical engineering.

The aims of the course are to:
- Present and take forward arguments for sustainability in the design and implementation of energy delivery systems

- Provide you with a broad basis of advanced understanding in the technologies that deliver high quality energy services with minimum environmental impact

- Design appropriate decentralised energy delivery systems, based on a range of criteria including environment, cost and engineering potential

- Develop your understanding of policy, market and institutional factors that promote or constrain innovation.

Excellent scholarship opportunity

Students who have accepted an offer for a full-time place on this course are encouraged to apply for LSBU's Kevin Herriott scholarship. Find out more about the Kevin Herriott scholarship.

Students on this course are also eligible to apply for a bursary from the Panasonic Trust fellowship scheme, worth £8,000.

See the website http://www.lsbu.ac.uk/courses/course-finder/sustainable-energy-systems-msc

Modules

An indicative list of topics covered on this course are:

- Renewable energy technologies 1
This module provides the necessary knowledge and skills to analyse the technical performance, environmental impact and economic feasibility of a variety of solar and wind powered systems. The module provides a systematic understanding of current knowledge, and a critical awareness of current problems and new insights at the forefront of professional practice; train students to evaluate critically current research and advanced scholarship in the field of solar and wind power; enables students to evaluate solar and wind power technologies, develop critiques of them and, where appropriate, to propose novel solutions.

- Renewable energy technologies 2
The module provides the necessary knowledge and skills to analyse the technical performance, environmental impact and economic feasibility of a number renewable energy technologies such as fuel cells, biofuels, geothermal, and micro-hydropower systems.

- Energy resource and use analysis
This module is designed to develop strategic and operational management skills in the fields of infrastructure asset management and project appraisal. It covers design life extensions, risk and asset management techniques for infrastructure, and techniques for physical appraisal of infrastructure, and their economic, environmental and social impacts.

- Electrical power
The module covers electrical power engineering as applied to the design of systems in buildings. In particular, this includes the connection of, and the effects of, small-scale embedded generation as might be employed to exploit renewable energy sources. The module aims to provide appreciation and understanding of electrical services design in buildings with particular reference to safety requirements and the effects of embedded generation on the supplier and the consumer.

- Sustainable refrigeration
The module introduces the principles of thermodynamics, and applies them to the study and design of energy efficient refrigeration systems. Vapour compression, absorption and other novel cycles are analysed and modelled Practical applications of sustainable refrigeration are investigated through case studies.

- Environmental management
The module is designed to develop understanding of the way in which human social and economic activities impact on the environment. The emphasis is on how managers can assess and influence the environmental impact of their particular organisation, with reference to key technologies and the political and legal constraints within which organisations must operate.

- Energy engineering project

Employability

The emergence of sustainable energy technologies, together with targets for implementation, mean that specialist engineers will increasingly be in demand to specify, design and install these systems. Many engineering consultancies and energy service companies are developing specialist sustainability teams, and already there is a shortage of skilled personnel.

Professional accreditation

The course provides the Masters level academic requirements leading to Chartered Engineer status when following on from an appropriate accredited BEng degree.

The course is accredited on behalf of the Engineering Council as meeting the requirements for Further Learning for registration as a Chartered Engineer. Candidates must hold a CEng accredited BEng/BSc (Hons) undergraduate first degree to comply with full CEng registration requirements.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

- direct engagement from employers who come in to interview and talk to students
- Job Shop and on-campus recruitment agencies to help your job search
- mentoring and work shadowing schemes.

Professional links

Accreditation:
This course is accredited by the Chartered Institution of Building Services Engineers (CISBE) and the Energy Institute as masters further learning to meet the academic requirements of becoming a Chartered Engineer (with a suitable first degree).

The course is accredited on behalf of the Engineering Council as meeting the requirements for Further Learning for registration as a Chartered Engineer. Candidates must hold a CEng accredited BEng/BSc (Hons) undergraduate first degree to comply with full CEng registration requirements.

The Chartered Institution of Building Services Engineers (CIBSE) is the standard setter and authority on building services engineering in the UK and overseas. It speaks for the profession and supports career development.

The Energy Institute is the professional members' body for the energy industry, delivering good practice and professionalism across the sector. Its purpose is to develop and disseminate knowledge, skills and good practice towards a safer, more secure and sustainable energy system.

Read less
Designed for students aspiring to senior management positions within the structural engineering field, this course focuses on applying engineering principles in structural engineering and on management. Read more
Designed for students aspiring to senior management positions within the structural engineering field, this course focuses on applying engineering principles in structural engineering and on management.

It aims to enable students from (but not limited to) BEng undergraduate degrees to develop their managerial skills, offering a balanced mix of Civil Engineering and management modules and can lead to Chartered Engineer (CEng) status.

For a full module list please visit our website: http://www.ntu.ac.uk/engineering

Professional accreditation
This degree is accredited as meeting the JBM requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate degree.

The JBM consists of the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Chartered Institution of Highways and Transportation (CHIT) and the Institute of Highway Engineers (IHE).

The course is also accredited by the Engineering Council. This accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC).

Postgraduate scholarships
The School will be offering a number of scholarships for students commencing on our postgraduate courses.

Find out more about these scholarships at http://www.ntu.ac.uk/adbe-pgscholarships

Postgraduate open events
Our postgraduate open events are a great opportunity to meet our postgraduate teaching staff and students, visit the University, find out about the courses we offer, bursaries and funding opportunities.

Find out more and book your place at http://www.ntu.ac.uk/adbe-pgevents
http://www.ntu.ac.uk/engineering

Read less
UEL has been offering postgraduate programmes in the area of civil engineering since 1964. The general aim of the programme is to provide graduate civil engineers with the opportunity to develop and gain additional expertise to meet higher demands of our profession and help you fast-track your career. Read more
UEL has been offering postgraduate programmes in the area of civil engineering since 1964.

The general aim of the programme is to provide graduate civil engineers with the opportunity to develop and gain additional expertise to meet higher demands of our profession and help you fast-track your career. This programme will enhance your knowledge in different areas of civil engineering, such as structural, geotechnical and coastal engineering, hydraulics, transportation, design and construction management. It will also provide you with deep understanding and skills in research methods.

Moreover, our MSc programmes in civil and structural engineering have a wide professional recognition, as they are accredited by the Joint Board of Moderators (JBM) of the Institutions of Civil, Structural, and Highways and Transportation Engineers. This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree (see http://www.jbm.org.uk for further information).

We also offer opportunities for those in work by providing part-time opportunities for study, and provide support to help balance work and study commitments.

Key Facts

Civil engineers with postgraduate qualifications find a wide range of career opportunities with consultancy, contactor and client organisations, as well as other related areas such as research and management.

Civil engineering at UEL was ranked 3rd in London (after UCL and Imperial College) and 4th amongst modern universities in the Guardian University Guide 2013's league table for civil engineering.

Why Choose Us?

We strive to provide you with learning opportunities and practical skills that will help you in your future employment. We will help you gain a comprehensive depth of knowledge and understanding of the most up-to-date practices and theories in civil engineering. There is a highly practical emphasis to the programme in the way it addresses many theoretical, design and professional issues. The programme continues to develop, becoming increasingly popular both in the UK and overseas.

Engineers employed in the construction industry find the part-time mode of the programme both flexible, adaptable and easily tailored to suit their personal requirements.

Read less
Are you a civil engineering graduate? Do you want to improve your technical knowledge and enhance your career prospects? Our MSc programme will deepen and broaden your understanding of civil engineering and help you fulfil your professional role in creating, improving and protecting the environment. Read more
Are you a civil engineering graduate? Do you want to improve your technical knowledge and enhance your career prospects? Our MSc programme will deepen and broaden your understanding of civil engineering and help you fulfil your professional role in creating, improving and protecting the environment. You’ll obtain advanced analytical skills in the core subject areas of structural analysis, geotechnics and hydraulics applying your knowledge in a range of project settings.

Key features

-Benefit from a postgraduate degree accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. See http://www.jbm.org.uk for further information.
-Take part in an integral work placement year and conduct the programme over two years.
-Be inspired by our new £19 million Marine Building, housing the acclaimed COAST laboratory which offers facilities for teaching water and coastal engineering as well as conducting world-class research.
-Explore our core content including advanced structural, geotechnical and hydraulic engineering analysis.
-Broaden your knowledge - other taught modules include project management and professional practice.
-Undertake a dissertation relating to the range of ongoing civil engineering research in the School of Marine Science and Engineering.
-Recent graduates work in a wide range of consultant, contractor and client organisations, including: Hyder Consulting, Babcock International Group plc, Manhire Associates Consulting Engineers and Maverick Ventures UK Ltd.

Course details

You’ll obtain advanced analytical skills in the core subject areas of geotechnics, structural analysis and hydraulics. You’ll also be introduced to the broader issues of project and process management in civil engineering. You’ll also have the opportunity to undertake a substantial research project on a topic of your choosing under the supervision of our academic staff. An optional placement year in industry is available for suitably successful participants.

Core modules
-ENBS542 Project Management and Professional Practice
-BPIE500 Masters Stage 1 Placement Preparation
-PRCE505 MSc Dissertation
-MGMT503 International Engineering Business Management
-GEEN501 Advanced Geotechnical Engineering
-STAD505 Advanced Structural Engineering
-MATH511 Advanced Engineering Analysis
-HYFM504 Advanced Hydraulic Engineering

Final year
-BPIE504 Civils Masters Industrial Placement

Every postgraduate taught course has a detailed programme specification document describing the programme aims, the programme structure, the teaching and learning methods, the learning outcomes and the rules of assessment.

Read less
This is an advanced postgraduate course specialising in structural engineering covering advanced structural analysis and design, structural computing simulation and also offering units linked with steel, concrete, timber and other structural designs. Read more
This is an advanced postgraduate course specialising in structural engineering covering advanced structural analysis and design, structural computing simulation and also offering units linked with steel, concrete, timber and other structural designs. It will also provide you with knowledge to design structures under dynamic and earthquake conditions.

The modules taught focus on learning advanced methods and techniques while developing analytic skills across a range of structural engineering topics.

Two modules, Finite Elements and Stress Analysis and Advanced Computing Structural Simulation, focus on learning advanced computing methods and commercial computing software for structures modelling and simulation.

Advanced Structural Analysis and Design and the Masonry and Timber Engineering modules will cover advanced structural theory and designing traditional structures, such as, steel, concrete, masonry and timbers. Earthquake Engineering will cover design of structures in seismic areas and analysis of structures under dynamic loading.

Soil-Structure Engineering will cover interaction of geotechnics and structures as well as foundation structures. Finally, you'll either conduct a structural related research project or a design project.

If you'd like any further information, please contact the course administrator, Ms. Jo Hillman: or call 020 7815 7106.

Accreditation:
Joint Board of Moderators (ICE, IStructE, IHE, CIHT)

See the website http://www.lsbu.ac.uk/courses/course-finder/structural-engineering-msc

Modules

Teaching techniques include: lectures, workshops, tutorials, laboratories, field trips and IT based blended learning. Visiting lecturers from industry contribute in some modules.

Module descriptions

- Advanced structural design
The module will deal with the design of structural elements and complex structural systems using the increasingly popular structural Eurocodes. It will cover engineering design principles and analytic techniques as well as the application of industrial standard software packages. There will also be an element of group and research work based on innovative design techniques.

- Soil-structure engineering
To acquaint the student with classical and modern methods for the analysis and design of structures that are embedded in the ground, specifically embedded retaining walls, piled foundations, and tunnels.

- Finite elements and stress analysis
The module will equip the student with linear elastic analysis of thin-walled sections, 2D and 3D stress analysis and transformations. It will introduce the Finite Element method theory and use ANSYS software.

- Masonry and timber engineering
This module introduces students to the materials, properties and design processes using timber and masonry construction. Eurocodes are used for the design of elements. Proprietary computer programmes are used alongside hand calculations. New techniques are introduced and discussed.

- Structural dynamics and earthquake engineering
The module aims to develop a thorough understanding of causes and nature of vibration in structures and to enable students to analyse the response of a structure under earthquake loadings.

- Advanced computing and structural simulation
The module will enable the students to use the advanced Finite Element Analysis (FEA) software (ANSYS) for modelling steel, reinforced concrete and composite structures. Both material and geometrical nonlinearities will be considered which link the complex structural system.

- Project / dissertation
This module is one third of the course and is an individually supervised piece of work that is typically either a research project or an innovative design exercise. The theme is related to topics covered on the course.

Employability

Employment prospects for graduates of Structural Engineering are strong. Successful students will enter into a variety of positions with employers which might include: structural engineer, consultant, project manager, government advisor and researcher.

LSBU Employability Services

LSBU is committed to supporting you develop your employability and succeed in getting a job after you have graduated. Your qualification will certainly help, but in a competitive market you also need to work on your employability, and on your career search. Our Employability Service will support you in developing your skills, finding a job, interview techniques, work experience or an internship, and will help you assess what you need to do to get the job you want at the end of your course. LSBU offers a comprehensive Employability Service, with a range of initiatives to complement your studies, including:

- direct engagement from employers who come in to interview and talk to students
- Job Shop and on-campus recruitment agencies to help your job search
- mentoring and work shadowing schemes.

Professional links

This degree is an accredited MSc (Technical) course by the Joint Board of Moderators as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

Read less
Running for over 35 years, this fully accredited MSc programme builds advanced capabilities in specialist aspects of bridge engineering. Read more
Running for over 35 years, this fully accredited MSc programme builds advanced capabilities in specialist aspects of bridge engineering.

Successful completion of this programme will aid you in pursuing a career as a bridge engineer with a consultancy, a specialist contractor or a local authority.

PROGRAMME OVERVIEW

Graduate students will find the programme of substantial use in developing their knowledge and skills base for bridge analysis, design and management.

The programme also offers the opportunity for practising bridge engineers to update their knowledge of current design and assessment codes and guidelines, become familiar with developments in new techniques for the design, construction and management of bridges.

The Bridge Engineering programme encompasses a wide range of modules addressing the whole life-analysis of bridge structures from design to end-of-life.

Optional modules from some of our other study streams are also offered, covering structural engineering, geotechnical engineering, water engineering, construction management, and infrastructure engineering and management.

Graduates are highly employable and may progress to relevant specialist PhD or EngD research programmes in the field.

PROGRAMME STRUCTURE

This programme is studied over either one year (full-time) or between two and five years (part-time or distance learning). It consists of eight taught modules and a dissertation project.

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.

Bridge Engineering Group Modules
-Bridge Deck Loading and Analysis
-Prestressed Concrete Bridge Design
-Durability of Bridges and Structures
-Steel and Composite Bridge Design
-Long-Span Bridges

Structural Engineering Group Modules
-Steel Building Design
-Space Structures
-Structural Mechanics and Finite Elements
-Subsea Engineering
-Concrete Building Design
-Structural Safety and Reliability
-Earthquake Engineering
-Design of Masonry Structures

Geotechnical Engineering Group Modules
-Advanced Soil Mechanics
-Energy Geotechnics
-Geotechnical Structures
-Soil-Structure Interaction
-Foundation Engineering

Construction Management Group Modules
-Construction Management and Law
-Construction Organisation
-Project and Risk Management

Infrastructure Engineering and Management Group Modules
-Infrastructure Investment and Financing
-Infrastructure Interdependencies and Resilience
-Infrastructure Asset Management
-Sustainability and Infrastructure

Water and Environmental Engineering Group Modules
-Environmental Health
-Water Treatment
-Wastewater Treatment
-Applied Chemistry and Microbiology
-Pollution Control
-Groundwater Control
-Regulation and Management
-Water Resources Management and Hydraulic Modelling
-Water Policy and Management
-Dissertation
-Dissertation Project

EDUCATIONAL AIMS OF THE PROGRAMME

The programme aims to provide graduates with:
-A comprehensive understanding of engineering mechanics for bridge analysis
-The ability to select and apply the most appropriate analysis methodology for problems in bridge engineering including advanced and new methods
-The ability to design bridge structures in a variety of construction materials
-A working knowledge of the key UK and European standards and codes of practice associated with the design, analysis and construction of bridge structures and the ability to interpret and apply these to both familiar and unfamiliar problems
-The necessary technical further learning towards fulfilling the educational base for the professional qualification of Chartered Engineer

PROGRAMME LEARNING OUTCOMES

The programme provides opportunities for students to develop and demonstrate knowledge and understanding, skills, qualities and other attributes in the following areas:

Knowledge and understanding
-A knowledge and understanding of the key UK and European standards and codes of practice relating to bridge engineering
-The ability to interpret and apply the appropriate UK and European standards and codes of practiceto bridge design for both familiar and unfamiliar situations
-A knowledge and understanding of the construction of different types of bridge structures using different types of materials (e.g. concrete and steel)
-A knowledge and understanding of the common and less common materials used in bridge engineering
-A comprehensive understanding of the principles of engineering mechanics underpinning bridge engineering
-The ability to critically evaluate bridge engineering concepts
-The ability to apply the appropriate analysis methodologies to common bridge engineering problems as well as unfamiliar problems
-The ability to understand the limitations of bridge analysis methods
-A knowledge and understanding to work with information that may be uncertain or incomplete
-A Knowledge and understanding of sustainable development related to bridges
-The awareness of the commercial, social and environmental impacts associated with bridges
-An awareness and ability to make general evaluations of risk associated with the design and construction of bridge structures including health and safety, environmental and commercial risk
-A critical awareness of new developments in the field of bridge engineering

Intellectual / cognitive skills
-The ability to tackle problems familiar or otherwise which have uncertain or incomplete data (A,B)
-The ability to generate innovative bridge designs (B)
-The ability to use theory or experimental research to improve design and/or analysis
-The ability to apply fundamental knowledge to investigate new and emerging technologies
-Synthesis and critical appraisal of the thoughts of others

Professional practical skills
-The awareness of professional and ethical conduct
-A Knowledge and understanding of bridge engineering in a commercial/business context
-Ability to use computer software to assist towards bridge analysis
-Ability to produce a high quality report
-Ability of carry out technical oral presentations

Key / transferable skills
-Communicate engineering design, concepts, analysis and data in a clear and effective manner
-Collect and analyse research data
-Time and resource management planning

Read less
This fully accredited MSc programme helps graduate engineers to acquire advanced capabilities and in-depth knowledge across a range of civil-engineering disciplines, including bridge engineering, construction management, and geotechnical, structural and water engineering. Read more
This fully accredited MSc programme helps graduate engineers to acquire advanced capabilities and in-depth knowledge across a range of civil-engineering disciplines, including bridge engineering, construction management, and geotechnical, structural and water engineering.

This well-established programme is delivered by experienced University staff, together with practising engineers from consultancies and local authorities.

PROGRAMME OVERVIEW

You can access six study streams on this Masters programme:
-Bridge Engineering
-Construction Management
-Geotechnical Engineering
-Structural Engineering
-Water Engineering and Environmental Engineering
-Infrastructure Engineering and Management

As well as supporting the career development of Civil Engineering graduates, this programme provides the necessary further learning for engineers working in the construction industry who hold related first degrees such as engineering geology or construction management.

It is also designed to update the technical skills of practising engineers engaged in the planning, design, construction and operation of civil-engineering works.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time / distance learning for between two to five academic years. It consists of eight taught modules and a dissertation. This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.

Structural Engineering Group Modules
-Steel Building Design
-Space Structures
-Structural Mechanics and Finite Elements
-Subsea Engineering
-Concrete Building Design
-Structural Safety and Reliability
-Earthquake Engineering
-Design of Masonry Structures

Bridge Engineering Group Modules
-Bridge Deck Loading and Analysis
-Prestressed Concrete Bridge Design
-Durability of Bridges and Structures
-Bridge Management
-Steel and Composite Bridge Design
-Long-Span Bridges

Geotechnical Engineering Group Modules
-Advanced Soil Mechanics
-Energy Geotechnics
-Geotechnical Structures
-Soil-Structure Interaction
-Deep Foundations and Earth Retaining Structures

Construction Management Group Modules
-Construction Management and Law
-Construction Organisation
-Project and Risk Management

Infrastructure Engineering Group Modules
-Infrastructure Investment and Financing
-Infrastructure Interdependencies and Resilience
-Infrastructure Asset Management
-Sustainability and Infrastructure

Water and Environmental Engineering Group Modules
-Environmental Health
-Water Treatment Optional
-Wastewater Treatment
-Applied Chemistry and Microbiology
-Pollution Control
-Groundwater Control
-Regulation and Management
-Water Resources

Dissertation
-Dissertation Project

EDUCATIONAL AIMS OF THE PROGRAMME

The Civil Engineering programme aims to provide graduate engineers with:
-Advanced capabilities and in-depth knowledge in a range of specialised aspects of civil engineering
-It is also designed to update the technical skills of practising engineers engaged in the planning, design, construction and operation of civil engineering works and to contribute to a personal professional development programme
-A working knowledge of some of the UK and European standards and codes of practice associated with the design, analysis and construction of civil engineering structures and the ability to interpret and apply these to both familiar and unfamiliar problems
-The necessary further learning towards fulfilling the educational base for the professional qualification of Chartered Engineer in both a technical or non-technical capacity dependent upon module selection

PROGRAMME LEARNING OUTCOMES

The programme provides opportunities for students to develop and demonstrate knowledge and understanding, skills, qualities and other attributes in the following areas:

Knowledge and understanding
-The mathematical principles necessary to underpin their education in civil engineering and to enable them to apply mathematical methods, tools and notations proficiently in the analysis and solution of multi-disciplinary open ended engineering problems
-The properties, behaviour and use of relevant materials
-The management techniques which may be used to achieve civil engineering objectives within that context
-Some of the roles of management techniques and codes of practice in design
-The principles and implementation of some advanced design and management techniques specific to civil engineering
-Mathematical and computer models relevant to civil engineering, and an appreciation of their limitations
-The role of the professional engineer in society, including health, safety, environmental, sustainability, ethical issues and risk assessment within civil engineering
-The wider multidisciplinary engineering context and its underlying principles
-Developing technologies related to civil engineering and the ability to develop an ability to synthesize and critically appraise some of them
-The framework of relevant requirements governing engineering activities, including personnel, health, safety, and risk issues (an awareness of)
-The advanced design processes and methodologies and the ability to adapt them in open ended situations.

Intellectual / cognitive skills
-Analyse and solve problems
-Think strategically
-Synthesis of complex sets of information
-Understand the changing nature of knowledge and practice in the management of culturally diverse construction environments
-Select and transfer knowledge and methods from other sectors to construction-based organisation
-Produce sound designs to meet specified requirements such as Eurocodes, deploying commercial software packages as appropriate
-Dynthesis and critical appraisal of the thoughts of others

Professional practical skills
-Awareness of professional and ethical conduct
-Extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools where appropriate
-Evaluate and integrate information and processes in project work
-Present information orally to others
-Show a capability to act decisively in a coordinated way using theory, better practice and harness this to experience
-Use concepts and theories to make engineering judgments in the absence of complete data
-Observe, record and interpret data using appropriate statistical methods and to present results in appropriate forms for the civil engineering industry

Key / transferable skills
-Communicate engineering design, concepts, analysis and data in a clear and effective manner
-Collect and analyse research data
-Time and resource management planning

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
This well-established and fully accredited MSc programme will develop the knowledge and skills acquired in your undergraduate programme. Read more
This well-established and fully accredited MSc programme will develop the knowledge and skills acquired in your undergraduate programme. It builds the advanced capabilities in analysis and codified design in specialised aspects of structural engineering that are required by industry.

PROGRAMME OVERVIEW

Our Structural Engineering postgraduate programme is delivered by the Faculty’s own staff, together with practising engineers from consultancies and local authorities.

For practising engineers engaged in the planning, design and construction of structural engineering works, this programme provides an opportunity to update their knowledge of current design practice and to become familiar with developments in codes and methods of analysis.

You will be able to choose from a rich and varied selection of specialist structural engineering subjects. The programme is offered in the standard full-time mode, in addition to part-time and distance learning options.

Graduates from the programme are highly employable and may progress to relevant specialist PhD or EngD research programmes in the field.

PROGRAMME STRUCTURE

This programme is studied full-time over one academic year and part-time or distance learning over two to five academic years. It consists of eight taught modules and a dissertation project.

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.

Structural Engineering Group Modules
-Steel Building Design
-Space Structures
-Structural Mechanics and Finite Elements
-Subsea Engineering
-Concrete Building Design
-Structural Safety and Reliability
-Earthquake Engineering
-Design of Masonry Structures

Bridge Engineering Group Modules
-Bridge Deck Loading and Analysis
-Prestressed Concrete Bridge Design
-Durability of Bridges and Structures
-Bridge Management
-Steel and Composite Bridge Design
-Long-Span Bridges

Geotechnical Engineering Group Modules
-Advanced Soil Mechanics
-Energy Geotechnics
-Geotechnical Structures
-Soil-Structure Interaction
-Deep Foundations and Earth Retaining Structures

Construction Management Group Modules
-Construction Management and Law
-Construction Organisation
-Project and Risk Management

Infrastructure Engineering Group Modules
-Infrastructure Investment and Financing
-Infrastructure Interdependencies and Resilience
-Infrastructure Asset Management
-Sustainability and Infrastructure

Water and Environmental Engineering Group Modules
-Environmental Health
-Water Treatment
-Wastewater Treatment
-Applied Chemistry and Microbiology
-Pollution Control
-Groundwater Control
-Regulation and Management
-Water Resources

Dissertation
-Dissertation Project

Apart from the usual full-time mode, there are also part-time options. The majority of Bridge, Geotechnical and Structural Engineering modules can be studied by distance learning through the use of an interactive web-based e-learning platform (SurreyLearn). This programme can be studied via distance learning, which allows a high level of flexibility and enables you to study alongside other commitments you may have.

EDUCATIONAL AIMS OF THE PROGRAMME

The programme aims to provide graduates with:
-A comprehensive understanding of engineering mechanics for structural analysis
-The ability to select and apply the most appropriate analysis methodology for problems in structural engineering including advanced and new methods
-The ability to design structures in a variety of construction materials
-A working knowledge of the key UK and European standards and codes of practice associated with the design, analysis and construction of civil engineering structures and the ability to interpret and apply these to both familiar and unfamiliar problems
-The necessary technical further learning towards fulfilling the educational base for the professional qualification of Chartered Engineer

PROGRAMME LEARNING OUTCOMES

Knowledge and understanding
-A knowledge and understanding of the key UK and European standards and codes of practice relating to structural engineering
-The ability to interpret and apply the appropriate UK and European standards and codes of practice to structural design for both familiar and unfamiliar situations
-A knowledge and understanding of the construction of different types of structures using different types of materials (e.g. concrete and steel)
-A knowledge and understanding of the common and less common materials used in structural engineering
-A comprehensive understanding of the principles of engineering mechanics underpinning structural engineering
-The ability to critically evaluate structural engineering concepts
-The ability to apply the appropriate analysis methodologies to common structural engineering problems as well as unfamiliar problems
-The ability to understand the limitations of structural analysis methods
-A knowledge and understanding to work with information that may be uncertain or incomplete
-A Knowledge and understanding of sustainable development related to structures
-The awareness of the commercial, social and environmental impacts associated with structures
-An awareness and ability to make general evaluations of risk associated with the design and construction of structures including health and safety, environmental and commercial risk
-A critical awareness of new developments in the field of structural engineering

Intellectual / cognitive skills
-The ability to tackle problems familiar or otherwise which have uncertain or incomplete data
-The ability to generate innovative structural designs
-The ability to use theory or experimental research to improve design and/or analysis
-The ability to apply fundamental knowledge to investigate new and emerging technologies
-Produce sound designs to meet specified requirements such as Eurocodes, deploying commercial software packages as appropriate
-Synthesis and critical appraisal of the thoughts of others

Professional practical skills
-The awareness of professional and ethical conduct
-A Knowledge and understanding of structural engineering in a commercial/business context
-Ability to use computer software to assist towards structural analysis
-Ability to produce a high quality report
-Ability of carry out technical oral presentations

Key / transferable skills
-Communicate engineering design, concepts, analysis and data in a clear and effective manner
-Collect and analyse research data
-Time and resource management planning

GLOBAL OPPORTUNITIES

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.

Read less
Modern civil engineering professionals often require an extensive understanding of construction management due to the strategic benefits it can bring to both individuals and project teams. Read more

Overview

Modern civil engineering professionals often require an extensive understanding of construction management due to the strategic benefits it can bring to both individuals and project teams.

As the industry becomes more competitive, organisations and their clients are increasingly demanding the combined time, cost and quality assurances that good project management practice provides. Furthermore, the industry now recognises that there is a need for engineers to gain specialist technical knowledge which compliments their academic and professional background.

These observations form the basis of the MSc/Postgraduate Diploma in Civil Engineering and Construction Management (See http://www.postgraduate.hw.ac.uk/prog/msc-civil-engineering-and-construction-management/ ); an essential core of construction management material augmented by a broad range of specialist civil engineering options.

Our students and graduates

Our students are recruited mainly from the civil engineering profession and are typically looking to broaden their knowledge base, extend their technical expertise or gain further learning to meet the needs of the professional institutions. Applicants from other backgrounds planning to develop a career in civil engineering and construction management will also be considered. Graduates of this programme are much sought after by employers, working in areas such as transport, water and wastewater engineering and the energy sector.

The Institute for Infrastructure and Environment (IIE)

This programme is delivered by Heriot Watt University’s Institute for Infrastructure and Environment (http://www.sbe.hw.ac.uk/research/institute-infrastructure-environment.htm) . As a Civil Engineering and Construction Management postgraduate student you will be part of the Institute’s Graduate School, connecting you with staff, research associates and fellow students engaging in cutting-edge research in areas such as water management, ultra-speed railways, construction materials, geomechanics and more.

Professional Recognition

This MSc degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. See http://www.jbm.org.uk for further information.

Industry links

This programme is supported by our Civil Engineering Industry Advisory Committee, which includes representatives from major multi-national employers AECOM, Arup, Atkins, Balfour Beatty, Halcrow, Jacobs and WSP Group. This committee convenes regularly and advises on the programme content and structure, ensuring quality, up-to-date content and relevance to industry needs.

Teaching and research excellence

Our teaching staff is engaged in a wide range of research within the field of civil engineering and construction management, with at least 90% of our overall research activity in General Engineering confirmed as world-leading or internationally excellent in the UK's Research Excellence Framework (REF) of 2014. Our track record in teaching civil engineering is strong, with our undergraduate programme ranked 1st in Scotland in the 2014 National Student Survey. Over half of our teaching staff are chartered engineers.

With a history dating back to 1821, Heriot-Watt is one of the UK’s leading universities, and Scotland’s most international. Find out more about Heriot-Watt University’s reputation, rankings and international profile http://www.hw.ac.uk/about/reputation/key-facts.htm .

Programme content

The MSc / Postgraduate Diploma in Civil Engineering and Construction Management provides students with a combination of courses designed to improve their knowledge and understanding of advanced civil engineering and modern construction management theory and practice. The programme structure consists of four mandatory construction management courses (CM) which all students must complete. Students must also choose four civil engineering courses (CE) from a list of specialist topics as detailed below. MSc students also complete two research projects.

Course Choice Semester 1
· Project Management: Theory & Practice (CM) - Mandatory
· Value & Risk Management (CM) – Mandatory
· Indeterminate Structures (CE) - Optional
· Sustainability in Civil Engineering (CE) - Optional
· Ground Engineering (CE) - Optional
· Environmental Geotechnics (CE) - Optional

Course Choice Semester 2
· Project Management: Strategic Issues (CM) – Mandatory
· Construction Financial Management (CM) – Mandatory
· Safety, Risk & Reliability (CE) - Optional
· Foundation Engineering (CE) - Optional
· Water and Waste Water Treatment (CE) - Optional
· Urban Drainage Design and Analysis (CE) - Optional
· Earthquake Engineering (CE) - Optional

Find out more about programme content here http://www.postgraduate.hw.ac.uk/prog/msc-civil-engineering-and-construction-management/

Career opportunities

This programme uses experience from an internally recognised postgraduate qualification, (MSc Construction Management from Heriot-Watt University) and combines it with the high profile Heriot-Watt University Civil Engineering Postgraduate Programme to provide an internationally acclaimed Masters programme.

Recent graduates have been employed by a variety of national and international employers.

English language requirements

If English is not the applicant’s first language a minimum of IELTS 6.5 or equivalent is required with all elements passed at 6.0 or above.

Applicants who have previously successfully completed programmes delivered in the medium of English language may be considered and will be required to provide documentary evidence of this. Examples would be secondary school education or undergraduate degree programme. A minimum of at least one year of full time study (or equivalent) in the medium of English language will be required.

We offer a range of English language courses (See http://www.hw.ac.uk/study/english.htm ) to help you meet the English language requirement prior to starting your masters programme:
- 14 weeks English (for IELTS of 5.5 with no more than one skill at 4.5);
- 10 weeks English (for IELTS of 5.5 with minimum of 5.0 in all skills);
- 6 weeks English (for IELTS 5.5 with minimum of 5.5 in reading & writing and minimum of 5.0 in speaking & listening)

Find information on Fees and Scholarships here http://www.postgraduate.hw.ac.uk/prog/msc-civil-engineering-and-construction-management/

Scholarships available

We have a number of fully funded Scottish Funding Council (SFC) scholarships available for students resident in Scotland applying for Civil Engineering and Construction Management. Find out more about this scholarship and how to apply http://www.hw.ac.uk/student-life/scholarships/postgraduate-funded-places.htm .

Read less
The MSc/Diploma in Structural and Foundation Engineering is designed for graduates and practising engineers who wish to improve their knowledge of structural and foundation engineering. Read more

Programme Background

The MSc/Diploma in Structural and Foundation Engineering is designed for graduates and practising engineers who wish to improve their knowledge of structural and foundation engineering. The structure and content of the programme has been carefully designed following liaison with a wide range of employers in the sector.

The staff members who deliver the programme have wide ranging expertise in specialist subjects which include reinforced concrete technology, dynamic and impact testing of materials, offshore engineering, structural safety, soil-structure interaction and numerical modelling.

The research activities of the programme involve combinations of experimental, numerical and theoretical work. The School has excellent practical facilities for static, dynamic, and impact testing and it has access to advanced computer and networking facilities that include a state-of-the-art parallel processing computer.

Professional Recognition

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) or an accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. See http://www.jbm.org.uk for further information.

Programme Content

The curriculum covers the specialist technical and computational skills necessary for today’s construction industry and therefore offers excellent preparation for employment across an industry that includes consulting and contracting engineers, public authorities and local government. In addition, the programme also provides a suitable springboard for graduates seeking a career in a research lead environment.

Both MSc and Diploma students undertake the eight taught courses listed below. MSc students also complete a Masters dissertation.

Semester 1:
Indeterminate Structures
Stability and Dynamics
Ground Engineering
FEA & Stress Analysis A

Semester 2:
Safety, Risk and Reliability
Earthquake Engineering
Foundation Engineering
FEA & Stress Analysis B

Dissertation

MSc students are also required to submit a research dissertation, the research topic normally aligns with the research interests of the staff in the School but can be tailored to suit the interests of the student or student’s employer. Distance learning and part time students are encouraged to suggest project topics based on their own work experience.

At the discretion of the Programme Leader, MSc students may choose to nominate a research project which enables them to investigate a problem they have encountered in their workplace or elsewhere. The research project can be undertaken in conjunction with a suitable industrial partner on campus or in industry if the industrial partner has the facilities to provide adequate supervision.

Mode of Study

The programme may be studied on a part-time basis and will therefore appeal to practising engineers. It is also delivered via distance learning which enables students from all around the globe to study without the need to interrupt their career and travel to Scotland. Examinations may be organised in each student’s country of residence to avoid unnecessary travel costs.

Read less
Water and Environmental Management aims to provide students with a multi-disciplinary understanding of water resources and environmental issues through the development of knowledge and skills necessary for the planning and management of these resources to meet the needs of society and the environment within the context of climate change. Read more
Water and Environmental Management aims to provide students with a multi-disciplinary understanding of water resources and environmental issues through the development of knowledge and skills necessary for the planning and management of these resources to meet the needs of society and the environment within the context of climate change.

About the programme

On-campus (full-time/part-time) students study eight courses from a range of optional courses. Independent Distance Learning (IDL) students can also choose courses from a range of options in both Semester 1 and 2.

The programme is delivered by experts in the field of water and environmental management, covering a wide range of relevant disciplines.

Topics covered:
=============
• Environmental Hydrology and Water Resources
• Computational Simulation of River Flows
• Water Supply and Drainage for Buildings
• Water Conservation
• Environmental Geotechnics
• Urban Drainage and Water Supply
• Water and Wastewater Treatment
• Marine Waste Water Disposal
• Environmental Statistics
• Innovative Technologies and Global Water Challenges
• Environmental Planning (on-campus only);
• Flood Inundation Modelling (on-campus only);
• Irrigation Water Management.

Career opportunities

Training is provided in water resources engineering, environmental engineering, flood risk management, integrated water resources management, environmental implications of water engineering schemes, and industrial software packages. On completion, graduates will be able to offer employers a broad range of skills and advanced knowledge in a number of important areas of water engineering.

Primary employment destinations include:
- Leading UK and international consultants (e.g. Jacobs, HR Wallingford, JBA, Halcrow, Hyder Consulting and Fairhursts)
- Local and National Government (in the UK and elsewhere)
- Environmental regulators (e.g. SEPA & EA)
- Academic institutions (including PhD study and research associate posts)
- Non-Governmental Organisations

Professional recognition

This MSc degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree. See http://www.jbm.org.uk for further information.

Part-time and Distance Learning study options

This programme can be studied full-time, part-time or via Independent Distance Learning (IDL), ideal for those in employment or with other commitments, providing flexible study options that fit around work or family. As an IDL student you will not be required to attend any lectures, tutorials or other events at any of Heriot-Watt University’s campuses.

Industry Links

Where possible MSc dissertation projects are set up in collaboration with industry, the aim being to encourage contact between the student and industry, and to underpin the industrial relevance of the projects.

This programme is supported by the Civil Engineering Industry Advisory Committee, which includes representatives from major multi-national employers AECOM, ARUP, Balfour Beatty, Halcrow, Jacobsand WSP Group. This committee convenes regularly and advises on the programme content and structure, ensuring quality, up-to-date content and relevance to industry needs.

English language requirements

If your first language is not English, or your first degree was not taught in English, we’ll need to see evidence of your English language ability. The minimum requirement for English language is IELTS 6.5 or equivalent.

We offer a range of English language courses: http://www.hw.ac.uk/study/english.htm

Read less
This course develops further understanding on advanced civil engineering. Professional accreditation. Read more
This course develops further understanding on advanced civil engineering.

Professional accreditation
The course is accredited by JBM as meeting the requirements for further learning for a Chartered Engineer (CEng) for candidates who already have an accredited CEng (partial) BEng(Hons) or an accredited IEng (full) BEng/BSc(Hons) undergraduate first degree.

Course structure
The MSc requires successful completion of six modules together with a thesis on an agreed subject; a PGDip does not require a thesis.

Areas of study
The course content reflects the professional expertise and research interests of the course team. Modules are appropriate for civil engineers wishing to wider their knowledge in core areas such as structural analysis, geotechnical engineering and hydraulics. The course also offers a degree of flexibility to undertake study in related subjects such as applied geology, water environmental management and construction management. The course has an emphasis on practical applications of advanced civil engineering concepts and much use is made of state-of-the-art laboratory, computational facilities and technical software.

Core modules cover geotechnical earthquake engineering, dynamics of structures with earthquake engineering applications, random vibrations of structures, rock mechanics, coastal engineering and wave loading, and hydrogeology.

Syllabus
Core modules cover geotechnical earthquake engineering, dynamics of structures with earthquake engineering applications, random vibrations of structures, rock mechanics, coastal engineering and wave loading, and hydrogeology.

Career and progression opportunities
The course is particularly appropriate for work in structural, geotechnical , and/or coastal engineering.

Read less
Accredited by the Chartered Institution of Building Services Engineers CIBSE and the Energy Institute EI, the building services masters degree is a great choice for any engineering graduate looking to take their career to the next level and become a Chartered Building Services Engineer. Read more
Accredited by the Chartered Institution of Building Services Engineers CIBSE and the Energy Institute EI, the building services masters degree is a great choice for any engineering graduate looking to take their career to the next level and become a Chartered Building Services Engineer.

The Building Services Engineering masters receives global recognition and graduates have enjoyed career success with construction firms around the world.

This course has several different available start dates and study methods - please view the relevant web-page for more information:
JANUARY 2017 (Part Time) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00781-1PTAB-1617/Building_Services_Engineering_(January)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

SEPTEMBER 2017 (Part Time) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00781-1PTA-1718/Building_Services_Engineering_(Part-time)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

JANUARY 2018 (Full Time) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00931-1FTAB-1718/Building_Services_Engineering?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

JANUARY 2018 (Part Time) - http://www.gcu.ac.uk/ebe/study/courses/details/index.php/P00781-1PTAB-1718/Building_Services_Engineering_(Part-time)?utm_source=ZZZZ&utm_medium=web&utm_campaign=courselisting

Programme description

The building services engineering profession is a vibrant and important component of both the construction and engineering sectors of industry. The MSc Building Services Engineering is aimed at engineering graduates to enable them to progress towards full chartered (CEng) status.

There is a strong demand for good quality chartered building services engineers who have the wide and multi-disciplinary knowledge that enables them to operate effectively on projects involving diverse technical challenges. Engineers now require a period of postgraduate study after achieving an Honours degree on an accredited BEng programme before they can become eligible for chartered (CEng) status. The MSc Building Services Engineering programme has been designed primarily as a period of further learning to follow an honours degree in building services engineering or environmental engineering.

The programme offers you the opportunity to broaden your knowledge and experience of all technical aspects of building services design as well as providing an understanding of building management.

Assessment

Various methods are used to assess the modules depending on the nature of the module. These include written examination, course work, and oral presentation. Normally there is more than one assessment component in each module.

Professional accreditation

The programme is approved by the Chartered Institution of Building Services Engineers (CIBSE) and the Energy Institute. The MSc and a suitable accredited BEng (Hons) degree will together form the educational base for full CEng status.

Career Opportunities

The design of mechanical and electrical services for buildings of all types is a typical job profile and is carried out within mechanical and electrical design consultancies or within design-and-build construction companies.

Management of building facilities is another common employment destination, or in some cases the management of merchant or naval shipping and associated installations. Equipment manufacturers offer design and marketing opportunities.

Installation and commissioning of equipment and systems also offers technical and management opportunities.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X