• Swansea University Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Imperial College London Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • University of York Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
King’s College London Featured Masters Courses
University of Birmingham Featured Masters Courses
Southampton Solent University Featured Masters Courses
University of Leeds Featured Masters Courses
University of London International Programmes Featured Masters Courses
"architectural" AND "envi…×
0 miles

Masters Degrees (Architectural Environment)

  • "architectural" AND "environment" ×
  • clear all
Showing 1 to 15 of 243
Order by 
The MSc in Architecture and Sustainable Environment (MASE) is a taught course aimed at professionals and academics world-wide with an interest in sustainability in the built environment, including architects, engineers, geographers, surveyors, historians and urban designers. Read more
The MSc in Architecture and Sustainable Environment (MASE) is a taught course aimed at professionals and academics world-wide with an interest in sustainability in the built environment, including architects, engineers, geographers, surveyors, historians and urban designers.

The MSc is offered by Centre for Architecture and Sustainable Environment, a new research centre in the Kent School of Architecture that promotes a cross-disciplinary approach to research in the field of sustainability in the built environment, bridging the traditional boundaries between the arts and the sciences, research and practice. The course content ranges from the development of the design skills and the technical and scientific understanding required to develop sustainable solutions for new and existing buildings, the analysis of historic buildings and past environment technologies, to a critical exploration of the historical and cultural context of sustainability and environmental design.

The course, which can be studied full-time or part-time, offers an academically rigorous and intellectually challenging learning environment, which aims to enhance career development within the field for professionals and academics. The over-arching aim of the programme is to provide participants with a systematic understanding of core and advanced areas of sustainable design through a combination of taught courses, research assignments and project work. Students will be asked to conduct rigorous technical and historical research and to explore the practical application of their findings in the context of design and technology.

Visit the website https://www.kent.ac.uk/courses/postgraduate/182/architecture-and-the-sustainable-environment

Course structure

The programme is aimed at professionals and academics with an interest in sustainability in the built environment, including architects, engineers, geographers, surveyors, historians and urban designers. The MSc promotes a cross-disciplinary approach to research in the field of sustainability in the built environment, bridging the traditional boundaries between architecture and the sciences, research and practice.

The course content ranges from the development of the technical and scientific understanding required to develop sustainable design solutions for new and existing buildings, the analysis of past environment technologies, to a critical exploration of the context of sustainability and environmental design.

The programme may lead to a postgraduate diploma, if taken without the dissertation.

Modules

The following modules are indicative of those offered on this programme. This list is based on the current curriculum and may change year to year in response to new curriculum developments and innovation. Most programmes will require you to study a combination of compulsory and optional modules. You may also have the option to take modules from other programmes so that you may customise your programme and explore other subject areas that interest you.

AR827 - Principles of Environmental Design (30 credits)
AR828 - Rediscovery - Understanding Historic Buildings and Past Environmental T (30 credits)
AR829 - Monitoring and Modelling of Environmental Performance (30 credits)
AR830 - Sustainable Design Project (30 credits)
AR899 - Dissertation: Architecture and the Sustainable Environment (60 credits)

Assessment

Assessment is mostly based on coursework, with presentations, case-study analyses, design proposals, essays and the dissertation.

Programme aims

This programme aims to:

- enable students to develop systematic understanding of the effect of the built environment on the environmental performance and energy consumption of buildings, while optimising comfortable conditions for the occupants

- develop your understanding of the sustainability drivers for the built environment

- develop your in-depth knowledge of the theoretical principles of low carbon design

- develop the ability to analyse the environmental behaviour of historic structures and the efficiency of past environmental technologies, using modern scientific methods

- promote creativity in the integration of sustainable solutions in the built environment at different scales

- enable you to develop skills for physical monitoring and digital modelling of the environmental and energy performance of buildings

- provide you with the ability to work in multidisciplinary design teams

- promote and support independent research skills.

- enable you to develop the skills required for both autonomous practice and team-working.

- support you, so that you can fulfil your full potential in the programme.

Research areas

- Research centres

KSA incorporates the Centre for Research in European Architecture (CREAte), which focuses on research in architectural humanities and design, and Centre for Architecture and Sustainable Environment (CASE), which promotes research in the field of sustainable architecture.

- CREAte

The Centre provides a focus for research in architecture in the European context. Its emphasis is on the role and contribution of humanities to architecture and urban design in the context of urban and regional regeneration, nationally and internationally.

CREAte provides a platform for evening lectures by contemporary architects and scholars; hosting debates and events that are in the heart of architectural agenda of today.

The Centre builds upon its staff specialisms, interests and skills in the following areas: regional studies, contemporary architectural and urban theory and design, architectural history and theory (ranging from antiquity to contemporary European cities), sustainability, European topographies (landscape, urban, suburban and metropolitan) etc. Staff participate in the activities of AHRA – Architecture Humanities Research Association and are internationally published authors.

- CASE

The Centre promotes research in the field of sustainable environment regionally, nationally and internationally.

Its research focus encompasses different aspects and scales of the sustainable built environment from the individual building to the urban block, promoting the wider environmental agenda and keeping the School at the forefront of research and development in the field. CASE also pursues research into the historical and cultural dimension of environmental design to foster links between the sciences, arts and humanities. There is a strong interest in understanding the environmental behaviour of historic buildings and the strategies originally deployed to manage the internal environment.

The Centre has already secured funding from various sources. This includes three EPSRC projects on climate change weather data for a sustainable built environment, sustainability of airport terminal buildings and design interventions in the public realm for affecting human behaviour, and two TSB-funded projects on Building Performance Evaluation. CASE is also involved with the recent EPSRC large-scale network on Digital Economy Communities and Culture.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
The Programme, entirely offered in English, prepares high-level professionals that can work in the field of the built environment, and in particular of high energy performance, low environmental impact buildings, thanks to a multi-disciplinary training and to the acquisition of specialist engineering skills. Read more

Mission and goals

The Programme, entirely offered in English, prepares high-level professionals that can work in the field of the built environment, and in particular of high energy performance, low environmental impact buildings, thanks to a multi-disciplinary training and to the acquisition of specialist engineering skills.

The Programme offers two tracks with specific characteristics:
- Architectural Engineering (offered in Lecco), giving students the ability to manage – and take part in – the integrated design process of complex construction projects;
- Building Engineering (offered in Milano Leonardo), giving students the ability to design, model and predict the physical, mechanical, and energy behaviour of complex building components and systems, services and structures.

See the website http://www.polinternational.polimi.it/educational-offer/laurea-magistrale-equivalent-to-master-of-science-programmes/building-and-architectural-engineering/

Career opportunities

The Building and Architectural Engineer is a professional that can effectively practice in complex, multi-disciplinary and multi-scale projects, and in particular in the following fields:
- design of complex new buildings, in particular in the areas of technology, structures, energy efficiency and environmental quality;

- refurbishment and retrofit of existing buildings, in particular in the areas of technology, energy upgrade and structural consolidation;

- management of the multi-disciplinary, multi-scalar design process, with the help of specific design and information tools;

- technological innovation of building components and systems;

- advanced performance modelling of complex building components and systems, services and structures;

- management of global performances, with the goal of reducing the environmental impact of buildings.

More information on the programme website: http://www.ccsarcheng.polimi.it/

Presentation

See http://www.polinternational.polimi.it/uploads/media/Architectural_Engineering_Lecco.pdf
This track of the Master of Science in Building and Architectural Engineering trains Architectural Engineers that can manage and take part in the integrated design process of complex construction projects. An interdisciplinary approach to design and construction, and the related teamwork, are widely recognized as the essential tools to deliver buildings with high performances, reliable sustainability credentials, and a balanced life cycle cost.
The Architectural Engineer is a professional ready to work in complex, multidisciplinary and multi-scalar projects. The programme trains students through two parallel approaches:
- Giving them the tools, from the fields of both engineering and architecture, to be
effective members of design teams;
- Involving them in integrated studios where they can apply the principles of
integrated design to specific projects.

The programme prepares students to approach, among others, the fields of multiscale energy-efficient design, innovative construction technology and refurbishment of existing buildings, with a strong focus on the different scales of intervention (from the city and territory to the building and construction components). The programme is also strongly rooted in the European and Italian tradition which has created cities and buildings celebrated worldwide.

Subjects

- Architectural Design
- History of Architecture
- Building Physics
- Building Services
- Conservation
- Integrated Project Management
- Refurbishment and Energy Retrofit
- Structural Design
- Sustainable Building Technologies
- Sustainable Multidisciplinary Design Process
- Urban Design

See the website http://www.polinternational.polimi.it/educational-offer/laurea-magistrale-equivalent-to-master-of-science-programmes/building-and-architectural-engineering/

For contact information see here http://www.polinternational.polimi.it/educational-offer/laurea-magistrale-equivalent-to-master-of-science-programmes/building-and-architectural-engineering/

Find out how to apply here http://www.polinternational.polimi.it/how-to-apply/

Read less
The MSc in Architectural Conservation is a taught course aimed at professionals and academics world-wide with an interest in architectural heritage including architects, engineers, archaeologists, art historians, geographers and surveyors. Read more
The MSc in Architectural Conservation is a taught course aimed at professionals and academics world-wide with an interest in architectural heritage including architects, engineers, archaeologists, art historians, geographers and surveyors.

This course is fully recognised by The Institute of Historic Building Conservation (IHBC). The course provides both a thorough understanding of architectural heritage and the skills required to contribute to the preservation and development of historic sites. Benefiting from its location in the historic town of Canterbury, the programme combines the study of conservation theory and philosophy with an exploration of the technical aspects of repair and reconstruction. The city’s stunning Cathedral provides students with an education resource, giving them the opportunity to learn from the conservation of a World Heritage Site.

Open to students and professionals with an interest in architectural heritage, the course represents an ideal gateway to a career in demanding professional fields, such as conservation-oriented architectural practice, conservation consultancy and heritage management. As the future leaders in these fields, the course’s graduates are expected to play a central role in disciplines that lie at the centre of the current economic, environmental and social agendas.

This programme is offered jointly within two faculties, Humanities and Sciences.

Visit the website https://www.kent.ac.uk/courses/postgraduate/362/architectural-conservation

About Kent School of Architecture

Research at Kent School of Architecture achieves excellence in both the history and theory of architecture and in sustainable urban, peri-urban and environmental design. School staff have design expertise and specialist knowledge; they are at the forefront of current architectural issues, including sustainability, technology, professional practice and research. Our staff are active at academic and professional conferences, both nationally and internationally, and appear and publish in local and national media. The School promotes innovative and interdisciplinary research, emphasising sustainable design.

Much of the project work involved in the Kent School of Architecture is located on 'live' sites in the local region, using real clients and engaging challenging issues. Students in all stages of the school have been introduced to real urban and architectural design challenges in Lille, Margate, Folkestone, Dover, Rye, Chatham and, of course, Canterbury. Much of this work involves liaising with external bodies, such as architects, planners, council and development groups.

Course structure

The MSc is composed of four taught modules (two modules per term full-time, one module per term part-time) and a dissertation on the topic of your own choice.

The programme has a varied curriculum which reflects the multidisciplinary nature of conservation. The autumn term cultivates a critical understanding of historic buildings and provides an introduction to conservation philosophy and policy. The acquisition of a strong theoretical background is the basis for the study of practical techniques for the survey and preservation of architectural heritage.

Case studies and workshops carried out in collaboration with Canterbury Cathedral introduce you to the properties of historic building materials and the techniques employed in the repair of historic buildings. This aspect of the programme benefits from cutting-edge survey equipment and the use of conservation laboratories. A conservation project offers you the opportunity to design an intervention to an existing historic site in the historic centre of Canterbury. The dissertation that concludes the programme invites you to study an aspect of the conservation cycle of your choice, employing a high standard of scholarship.

Modules

The following modules are indicative of those offered on this programme. This list is based on the current curriculum and may change year to year in response to new curriculum developments and innovation. Most programmes will require you to study a combination of compulsory and optional modules. You may also have the option to take modules from other programmes so that you may customise your programme and explore other subject areas that interest you.

AR841 - Structural Appraisal of Historic Buildings (30 credits)
AR842 - The Legislative Framework (30 credits)
AR843 - Intervention at Historic Buildings (30 credits)
AR844 - Conservation Principles (30 credits)
AR898 - Dissertation: MSc in Architectural Conservation (60 credits)

Assessment

Assessment is mostly through coursework, with essays, reports, projects and the dissertation.

Programme aims

The programme aims to:

- ensure you are equipped with academic, professional, and personal skills and qualities that enable you to make a positive contribution related to the preservation of historic buildings.

- cultivate an appreciation of the different values that people can attach to historic buildings and places.

- promote an awareness of traditional building crafts as a valuable cultural resource.

- develop a thorough understanding of the processes that maintain and enhance historic places and the activities that change them.

- develop knowledge of the theoretical, historical, and professional context of architectural conservation.

- promote multidisciplinary collaboration and interaction with a wide range of professional bodies and individuals who have a role to play in the development of the built environment.

- ensure graduates develop the knowledge and confidence necessary to provide informed and specialist advice and to cultivate an awareness of their responsibility as consultants in the field of architectural conservation.

- understand the role that architectural conservation has to play as part of the modern ecological agenda.

- encourage the observation of the historic environment as a whole and its use as an educational resource.

- provide teaching informed by research and scholarship.

- develop an understanding of how the boundaries of knowledge are advanced through research.

- enable you to develop strategies for self-improvement and commitment to research and learning.

- build on close ties within Europe and elsewhere, reflecting Kent’s position as the UK’s European university.

- promote the understanding and preservation of local and national architectural heritage.

Careers

Our Master’s programmes have been devised to enhance your prospects in a competitive world. Professionals in the architectural, planning, environmental design and conservation fields who develop higher-level skills, accredited by relevant bodies, will find themselves well-placed to progress in their field. Our students have gone on to work for major public agencies and universities, as well as leading practitioners in the private sector.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
Make global connections on this Masters course in Architectural Engineering at Liverpool John Moores University. Learn about sustainable technologies and improving building performance through design at postgraduate level to enhance your career. Read more
Make global connections on this Masters course in Architectural Engineering at Liverpool John Moores University. Learn about sustainable technologies and improving building performance through design at postgraduate level to enhance your career.

•Course available to study full time (1 year) and part time (2 years)
•Designed as a specialist Masters course for holders of first degrees in architecture and architectural technology, construction management, engineering and related built environment disciplines
•Part time option if you are already in employment
•Opportunity to engage in multi-disciplinary project work
•Internationally recognised research in our Built Environment and Sustainable Technologies (BEST) Research Institute

This new MSc programme aims to develop your range of knowledge, understanding and practical skills, including CAD software. Your Masters skills will help you progress in a variety of roles within the built environment sector.

You will have the training to become a problem-solving architectural engineer or architectural technologist who is able to work in a multi-disciplinary environment and produce creative, sustainable design solutions to an advanced standard.

You will:

•extend your understanding of current and emerging sustainable technology and practices
•develop analytical, critical and problem solving skills appropriate to evaluating and improving building performance with design solutions
•have clear career development opportunities in areas allied to architectural engineering, technology and management
•develop your skills as an independent researcher and creative problem solver in the architectural engineering sector

When you graduate you will be able to:

•demonstrate knowledge of the fundamental concepts and principles of architectural engineering as a sustainable built environment discipline
•demonstrate critical understanding of the implications of design, environmental and management issues of information modelling that are relevant to architectural engineers
•apply appropriate technical solutions following the analysis and evaluation of complex design problems
•use CAD software proficiently for architectural engineering purposes

Please see guidance below on core and option modules for further information on what you will study.
Level 7

Building Design Suite
Building Engineering and Detailing
Sustainable Design
Integrated BIM Theory
Collaborative BIM Project
Integrated BIM in Practice
Research Methods
Dissertation

Further guidance on modules

The information listed in the section entitled ‘What you will study’ is an overview of the academic content of the programme that will take the form of either core or option modules. Modules are designated as core or option in accordance with professional body requirements and internal Academic Framework review, so may be subject to change. Students will be required to undertake modules that the University designates as core and will have a choice of designated option modules. Additionally, option modules may be offered subject to meeting minimum student numbers.

Academic Framework reviews are conducted by LJMU from time to time to ensure that academic standards continue to be maintained. A review is currently in progress and will be operational for the academic year 2016/2017. Final details of this programme’s designated core and option modules will be made available on LJMU’s website as soon as possible and prior to formal enrolment for the academic year 2016/2017.

Please email if you require further guidance or clarification.

Read less
This Interior Design course will suit recent graduates who already have some academic knowledge of interior design or interior products, but wish to deepen their design skills and understanding of the wide range of the interior design workfield. Read more
This Interior Design course will suit recent graduates who already have some academic knowledge of interior design or interior products, but wish to deepen their design skills and understanding of the wide range of the interior design workfield.

WHY CHOOSE THIS COURSE?

In this MA course the student has the possibility to focus on a specific field where their strength lies. The course interior design explores the human scale and relationship in the continuously changing context of the spatial environments.

You will be given the opportunity to learn to develop and design within a broad range of spatial environments, while considering the scale of the environment, manufacturing processes and exclusivity.

WHAT WILL I LEARN?

The MA Course Interior design covers the wide scope of the work-field expressed in the axiom SMLXL (Small, Medium, Large, Extra Large).

Within the modules there is the possibility to explore the specific scale of the work field of interior design while learning specific skills in one of the fields of SMLXL.

Small: development and research in specific skills for the production of interior products such as e.g. furniture, lighting, interior fabrics, carpets and paints, this in close relationship with local and national industry and manufacturers. The students have the possibility to deepen their knowledge about manufacturing and developing Interior products.

Medium: development and research in specific skills for medium interior projects such as e.g. domestic design, small shops, car interiors and small events, this by developing trends, brands and prognoses. The students have the possibility to deepen their skills of architectural and planning and knowledge about brand identity.

Large: development and research in specific skills for large Interior projects such as e.g. hotels, offices, boat interiors, train interiors, this by developing complex proposals for interiors within brand Identity, new media, the architectural context and (urban) spatial context. The students have the possibility to deepen their knowledge about complex planning in a architectural environment with a complex brand and new media identity.

Extra large: development and research in specific skills for extra large interior design projects such as e.g. university campus, hospitals, cruise ships, airports, this by developing managements skills in developing, designing and planning within an architectural environment with a complex management structure.

TEACHING CONTACT HOURS

The average teaching contact hours will be 18 hours per week. We do not offer a part-time evening or weekend pattern of delivery, but if you wish to study part time during the day, please contact the course director to explore further.

HOW WILL THIS COURSE ENHANCE MY CAREER PROSPECTS?

The knowledge gained by the CU interior design graduates will enable them to find employment internationally as well as nationally and the nature of the course will provide strong international recruitment.

OPPORTUNITIES FOR AN INTERNATIONAL EXPERIENCE

The course will have strong connections with industry and other universities in Europe as well as other overseas territories like Asia, and Northa and South America. Collaborations in China are already being developed as well as associations with academia and industry in The Netherlands.

GLOBAL LEADERS PROGRAMME

Centre for Global Engagement logoTo prepare students for the challenges of the global employment market and to strengthen and develop their broader personal and professional skills Coventry University has developed a unique Global Leaders Programme.

The objectives of the programme, in which postgraduate and eligible undergraduate students can participate, is to provide practical career workshops and enable participants to experience different business cultures.

Read less
The programme is co-organised by Vrije Universiteit Brussel (VUB) and Universite Libre de Bruxelles (ULB), offering students the possibility to obtain a double master's degree at the end of the programme. Read more

About the programme

The programme is co-organised by Vrije Universiteit Brussel (VUB) and Universite Libre de Bruxelles (ULB), offering students the possibility to obtain a double master's degree at the end of the programme. The first year of courses is taught at the ULB Engineering Campus in Brussels, while the second year is taught at VUB.

The Master of Science in Architecture trains designers to realize the synergy between the engineering and the architecture disciplines.

The programme provides students with an advanced level of knowledge and insight and makes them proficient in the creative and inventive use of the engineering and architectural knowledge in a complex architectural design.

The training is characterized by the integration of scientific research in education. The design studio acts as a crystallization point in the application of knowledge with respect to architectural design, structural design, installation techniques and urban planning. Given the complex and more advanced nature of architectural design at Master level, it requires the interaction between various disciplines combined with a scientific attitude.

The programme prepares students to a wide range of job profiles such as architectural and structural engineer, project manager, consultant, employee or executive in an architectural or engineer office, supervisor of the built heritage, policy maker for urban planning, researcher and others.

The programme consist of a fixed number of compulsory courses and a number of optional courses . The second year also includes a master thesis. In this master thesis it is requested to realize a synergy between a research study and an architectural design.

Curriculum

Available on http://www.vub.ac.be/en/study/architectural-engineering/programme

Tuition fees

• €837 per year for EEA students
• €2500 per year for non-EEA students (student who require a student visa)

Student profile

You are looking for a career which is creative, challenging and fulfilling
You are driven by architectural and constructional design
You are looking for an engineering degree which combines the challenges and inventiveness of the modern building industry with a flair for originality and creativity
You are interested to study in an international environment

Admission requirements

Applicants should have acquired the following knowledge during their undergraduate studies:

For architectural science: to be able to make use of the knowledge concerning architectural theory and history in project proposals and to discourse on architectural subjects in a reasoned and critical way;

For engineering sciences: to posses the more specialized knowledge for the calculation and simulation of all technical aspects related to the execution of a project, ranging from the stability of structures, foundation techniques, building physics, building acoustics, heating, durability, lighting to the use of new materials, lightweight constructions, the re-use and renovation of existing buildings and the 4D-design;

For design: to have insight into complex problems, to be able to formulate and define a problem, to integrate multi-disciplinary knowledge in the design, to justify the steps taken in a design process, to implement design insights on a distinctive way and to present and communicate, including critical reflection.

Additionally, applicants should be proficient in English

Read less
The MSc in Architectural Design is run by Professor Neil Spiller and Head of Department Nic Clear; the programme encourages students to develop a speculative and experimental approach to architectural design through the use of advanced digital tools and techniques. Read more
The MSc in Architectural Design is run by Professor Neil Spiller and Head of Department Nic Clear; the programme encourages students to develop a speculative and experimental approach to architectural design through the use of advanced digital tools and techniques. It is aimed at students of architecture and related disciplines, who wish to continue their academic, intellectual and professional skills beyond the requirements of their professionally recognised qualification.

The programme aims to address and redefine new trends and knowledge in the field of architecture and offers a postgraduate design framework strongly supported by theoretical components. Teaching is by members of the AVATAR (Advanced Virtual and Technological Architecture Research) group students who are encouraged to develop a personal focus and independent research position within the programme framework. It is particularly geared towards students who wish to go on to study at MPhil/PhD.

The programme is not validated by a professional body and does not provide exemption from the Royal Institute of British Architects (RIBA) Part 2 professional examination or from the Architects' Registration Board (ARB) Part 2 prescript.

The Department is based in a new state of the art building designed by the award winning architects Heneghan Peng; it is equipped with fourteen rooftop landscapes, cutting edge digital workshops, extensive design studios, a world-class library and two gallery spaces.

Our building is located in the heart of Greenwich, the newest addition to a suite of magnificent buildings that occupy the UNESCO World Heritage site and the location of the Greenwich Prime Meridian.

The aims of the programme are:

- To develop research concerning the impact of advanced technology on architectural design, and to contribute on a discussion on issues such as aesthetics, philosophy and cybernetics

- To concern itself with the technologies of virtuality (exploring fully immersed, mixed and augmented environments); time based digital media (film, video and animation), nano and bio technology (micro-landscapes and architecture, ethics, sustainability and ecology) including reflexive environments and cybernetic systems.

Visit the website http://www2.gre.ac.uk/study/courses/pg/arc/arcdes

Architecture and Landscape

We need tools to help us create a built environment that is responsive rather than obstructive to its users and to the world around it. At Greenwich we encourage both students and staff to embrace the interconnectedness of design, construction and building management, of landscape architecture and graphic design, and to constantly look at new ways of exploring these areas.

All architecture programmes focus on the urgent necessity to change our living habits in order to design and build a sustainable urban environment.

The construction management programmes are designed to provide students with a high level of understanding of the design, function, construction and statutory requirements for buildings of all classes, and to prepare them for more advanced employment within the construction industry.

What you'll study

Full time
- Year 1:
Students are required to study the following compulsory courses.

Master Project (60 credits)
Advanced Architectural Design 01 (Project Themes) (40 credits)
Architectural Thesis (40 credits)
Theories of Architectural Design (20 credits)
Future Representations (20 credits)

Part time
- Year 1:
Students are required to study the following compulsory courses.

Advanced Architectural Design 01 (Project Themes) (40 credits)
Theories of Architectural Design (20 credits)
Future Representations (20 credits)

- Year 2:
Students are required to study the following compulsory courses.

Master Project (60 credits)
Architectural Thesis (40 credits)

Fees and finance

Your time at university should be enjoyable and rewarding, and it is important that it is not spoilt by unnecessary financial worries. We recommend that you spend time planning your finances, both before coming to university and while you are here. We can offer advice on living costs and budgeting, as well as on awards, allowances and loans.

Assessment

Students are assessed through coursework, thesis and design portfolio.

Career options

This programme is suitable for those aiming to develop advanced design skills for use in architectural practice, and for those aiming to enhance their academic skills and/or go on to doctoral study.

Find out about the teaching and learning outcomes here - http://www2.gre.ac.uk/__data/assets/pdf_file/0005/644423/MA-Advanced-Architectural.pdf

Find out how to apply here - http://www2.gre.ac.uk/study/apply

Read less
The Postgraduate Certificate in Architectural History covers English architectural history from the Anglo-Saxon period to the present day. Read more
The Postgraduate Certificate in Architectural History covers English architectural history from the Anglo-Saxon period to the present day. It will be of interest to those seeking to develop their
• knowledge of the broad sweep of English architecture
• understanding of the evolution of the historic environment more widely
• practical skills of recording and analysing buildings.

Visit the website https://www.conted.ox.ac.uk/about/postgraduate-certificate-in-architectural-history

What the course offers

The Architectural History course is part-time and consists of three taught units and a dissertation. The taught units are delivered in association with the MSc in Historic Conservation course at Oxford Brookes University. The first two units, Historical Studies, are taught at OUDCE, Rewley House, 1 Wellington Square, Oxford, and the third unit, Site Evaluation and Survey, is taught at Oxford Brookes in Headington. The dissertation is supervised within OUDCE.

Teaching takes place on Monday mornings, from 9.30am to 1pm, over three terms commencing in the autumn each year. Some sessions in Unit 3 will be held on Monday afternoons between 2pm and 5.30pm, and one continues on to a Tuesday.

The number of Certificate students is normally limited to10 in each year. There may be up to a further 25 students in each class from Oxford Brookes University.

Although it offers a qualification in its own right, the course is designed to enable successful students to progress to the Oxford Brookes MSc in Historic Conservation with exemption from the three taught units, subject to the admission requirements of Oxford Brookes University.

Programme details

Units 1 and 2 are linked and taught in consecutive terms. Their aim is to enable students to acquire an understanding of the evolution of England's architecture, and of different approaches to the history of buildings.

Unit 1: Historical Studies 1
Settlement, Landscape and Medieval Buildings

Unit 1 concentrates on the medieval period. It provides an introduction to the evolution of the landscape and the major elements of architectural history in England up to the sixteenth century.

The aim of the unit is to enable a student to acquire a sound understanding of the basic development of medieval buildings and their context.

Teaching is by means of lectures and field trips. Students also need to ensure they have sufficient time for directed reading and private study. Tutorials are available by request.

Assessment: three essays each of 1,500 words.

Unit 2: Historical Studies 2
Post-Medieval Buildings

The unit will continue the themes introduced in Historical Studies 1 and will analyse the major architectural developments from the sixteenth century to the present century.

The unit will seek to build on the achievements of Historical Studies 1 to enable students to acquire a sound understanding of the development of English architectural history and its broader context down to the present century in a manner which is relevant to historic conservation.

Teaching is by means of lectures. Students also need to ensure they have sufficient time for directed reading and private study. Tutorials are available by request.
Assessment: two essays each of 2,000 words.

Unit 3: Site evaluation and survey: Local Historic Building Survey
Held at Oxford Brookes University, Headington.

This is a skill-based unit designed to develop expertise in understanding the special architectural and historical characteristics of a particular site, building (or group of buildings) and to develop techniques for its representation through research, measurement, and drawn/photographic recording.

This unit will develop the skills necessary to plan, prepare and execute a programme for the recording of structures and sites, and will create an awareness of the main sources of archive material for investigations into historic buildings, sites and monuments. It provides an introduction to the making of a competent analytical record of a site through text, photographic and measured surveys, and drawn representation.

Teaching is by means of lectures, field trips and practical sessions, which need to be supplemented by private study and individual fieldwork.

Assessment: portfolio record of a selected building to be submitted by mid-May 2017.

Unit 4: Individual dissertation
To provide an opportunity for an extended exploration of a single topic based on primary and secondary research to demonstrate the skills and knowledge gained in the other elements of the course.

An 8,000-word dissertation on a subject relevant to architectural history, chosen in consultation with the course tutor and due for submission by the end of August 2017. Dissertations are supervised within OUDCE.

Dissertation topics are chosen during Hilary Term, and all students make a short initial presentation of their subject in the last session of that term. There may be another class seminar in June, by agreement with the students. Individual supervisions are given at mutually convenient times from May to the end of July. Dissertations are submitted by the end of August.

Programme outcome

By the end of the course students should have achieved:

• a broad understanding of English architectural history
• an awareness of the critical literature relating to the subject
• the ability to make a record of a building
• the ability to conduct independent research.

Assessment methods

Assessment will be by coursework. The three units and the dissertation will each count for 25% of the final mark. To be successfully awarded the Certificate, you will need to attend 80% of the taught classes and achieve an overall mark of 50%. Full regulations and examination conventions can be obtained from the Registry, OUDCE, Rewley House, 1 Wellington Square, Oxford OX1 2JA.

Find out how to apply here - http://www.ox.ac.uk/admissions/graduate/courses/pgcert-architectural-history

Read less
Architectural conservation - the action of conserving built heritage while maintaining its values - is practiced differently across the world; sometimes not at all due to cultural and economic constraints. Read more

Why this course?

Architectural conservation - the action of conserving built heritage while maintaining its values - is practiced differently across the world; sometimes not at all due to cultural and economic constraints.

It is an emerging area of work which requires specialist training and knowledge to deal with its multidisciplinary and interdisciplinary nature. It also requires the development of a critical approach for the analysis and design of the intervention, informed by the shared international principles and the specific nature and context of the historic building to be conserved.

We need to attract new talent to the field of architectural conservation. To work with historic buildings is an enriching experience, which combines the creative aspects of designing a new building with the in-depth research required to understand in full the building and its context. Working with historic buildings is also a great training to improve the design of new buildings, as you learn a great deal about the importance of design ideas, innovation, durability and care. It is also a very sociable work, interacting with a variety of people from all backgrounds, joining forces in helping current generations to enjoy historic buildings, to create community identities around them, and to transmit the buildings and their values to the future.

Glasgow and its surrounding area provide an excellent location for the course, with architectural heritage from all periods, from Roman to Medieval, Georgian, Victorian and contemporary, without forgetting the better known C. R. Mackintosh and Alexander ‘Greek’ Thomson’s buildings. Strathclyde has a lively international community of staff and students and we enjoy a privileged position in the centre of Glasgow.

Study mode and duration:
- MSc: 12 months full-time; 24 months part-time
- PgDip: 9 months full-time; 18 months part-time
- PgCert: 5 months full-time; 9 months part-time

See the website https://www.strath.ac.uk/courses/postgraduatetaught/architecturaldesignfortheconservationofbuiltheritage/

You’ll study

The course is a platform for:
- collaboration with both practice and research partners
- architectural critique
- discussion and debate

All full-time students take instructional classes and a design project in the first two semesters. MSc students then complete a dissertation project.

Compulsory taught classes are delivered intensively, making them more accessible to part-time students and Continuing Professional Development (CPD). Areas explored in classes include:
- theory
- history
- survey
- investigations
- legislation
- materials
- structures

The course is informed by the outcomes of the research being carried out at the Architectural Design and Conservation Research Unit (ADCRU). It is a platform for collaboration with both practice and research partners; architectural critique, discussion and debate are fundamental parts of the course.

Open Access

Open Access modules are offered on individual modules from the MSc programme. They can be taken as stand-alone CPD options or gradually built towards a qualification.

Open Access students may transfer onto a part-time MSc or PgDip programme to complete their studies (subject to a maximum period of time).

Guest Lecturers/speakers

You’ll benefit from a large number of government, local authority and industry partners, who’ll lecture on up-to-date current practices, with a diverse point of views.

Facilities

- Studios
There are two fully-networked design studios; one dedicated to student self-study, the other to interactive design teaching.

- Library
In addition to the main University library, we have our own, on-site, reference library. Our collection is developed in direct response to the teaching delivered in the department.

- Workshop
A full range of hand and portable power tools are available (complete with instruction).

- PC Lab
Our lab computers have AutoCad and InDesign.

We also offer plotter printing, scanning and laser cutting services.

Accreditation

The course is fully recognised by the Institute of Historic Building Conservation (IHBC). The IHBC is the principal professional body for building conservation practitioners and historic environment specialists working in United Kingdom.

The course also conforms to the internationally recognised Guidelines for Education and Training in the Conservation of Monuments, Ensembles and Sites adopted by the International Council on Monuments and Sites (ICOMOS). These criteria are used by professional institutes for the assessment of evidence and professional accreditation in conservation.

Learning & teaching

The course is balanced between theory and practice. It’s delivered through:
- lectures
- workshops
- studio-based, and seminar-led learning, by staff and visiting experts from the UK and overseas

The course is a platform for collaboration with both practice and research partners; architectural critique, discussion and debate are fundamental parts of the course.

Assessment

Formative assessment will take place throughout the course.
You’ll be assessed through lectures, seminars, interim Studio Reviews and workshops, supported by student presentations, symposia and peer feedback.
Methods of teaching vary; some subjects are formally taught using lectures and seminars, others use a mix of methods which may incorporate small projects.
The main architectural conservation project is a studio based project which involves one-to-one tuition and appraisals in review seminars. Team teaching techniques are used in several projects and increasing use is made of student peer group reviews. Summative assessment will be through:
- studio reviews
- individual written essays and reports
- oral presentations
- dissertation - directly linked to the conservation project

Careers

Areas of employment for graduates are numerous. They can work as independent professionals in conservation or for architectural firms all over the worlds. The completion of the Masters will give a variety of opportunities:
- IHBC affiliate member with option to progress to full membership
- RIBA Conservation Registrant (CR) and/or RIAS Accredited Conservation Architect
- progress to RIBA Conservation architect (CA), RIBA Specialist Conservation architect (SCA) and/or RIAS Accredited or Advance Conservation Architect
- progress to Conservation Accreditation Register for Engineers (CARE), the joint register between the Institution of Civil Engineers (ICE) and Institution of Structural Engineers (IStructE)

"We work with a large number of government, local authority and industry partners, offering potential placement opportunities for students to work after their postgraduate degree study."

Heritage is recognised as a sector of international strategic importance. Local authorities and communities are also very interested in preserving their heritage. The conservation of historic buildings becomes more and more a day to day activity for architects and engineers.

Potential careers include:
- conservation architect in architectural firms
- conservation engineer in engineering firms
- conservation Officer in local authorities
- work in UK government agencies: Historic Scotland, English Heritage, CadW and the Environment and Heritage Service in Northern Ireland
- architect/conservation officer in other countries for government and local authorities
- work in UK and internationally architect/conservation officer for conservation organisations and charities such as UNESCO, ICOMOS, Council of Europe, ICCROM

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/

Read less
This MA is unique in architectural history, theory and criticism postgraduate study, providing a coherent and intensive forum in which students develop independent approaches to the subject. Read more
This MA is unique in architectural history, theory and criticism postgraduate study, providing a coherent and intensive forum in which students develop independent approaches to the subject. Graduates progress to academic, journalistic, curatorial and architectural professions with diverse skills in established and emerging subjects, theories and methodologies.

Degree information

The programme examines architecture and cities from early-modern 16th-century to contemporary 21st-century contexts. Rather than focusing on the work of individuals, stylistic classification or normative categories, the programme locates architecture within social, ideological, creative, political and urban processes, exploring the boundaries of what constitute legitimate architectural objects and sites of study.

Students undertake modules to the value of 180 credits.

The programme consists of two core modules (60 credits), four optional modules (60 credits) and a report (60 credits). A Postgraduate Diploma, two core modules (60 credits), four optional modules (60 credits), full-time nine months is offered.

Core modules:
-Critical Methodologies of Architectural History
-Research and Dissemination of Architectural History

Optional modules - students choose four of the following:
-Architecture in 19th- and 20th-Century Britain
-The Representation of Cities
-Theorising Practices: Architecture, Art and Urbanism
-History and Theory of Digital Design
-Materialist Ecological Architectures
-Multiple Modernities Architecture
-Practices of Criticism

Dissertation/report
All MA students undertake an independent research project which culminates in a 10,000-word dissertation and an oral examination.

Teaching and learning
The programme is delivered through a combination of seminars, lectures, building and gallery visits, film screenings, group working and one-to-one tutorials, and a field trip (optional). Assessment is through coursework, consisting of short exercises, classroom presentations, and longer essays for individual modules, a 10,000-word report and oral examination, and verbal presentations.

Careers

Graduates from the UCL Bartlett are very successful in gaining subsequent employment in the UK and internationally. At present there is a growing demand for our Master's graduates from a wide range of both public and private employers. Many graduates from the programme have gone on to research, teach and publish at universities and other institutions worldwide, including national media, publishing and heritage organisations, art galleries and museums.

Top career destinations for this degree:
-PhD in Architectural Visual Arts, University of East London
-Master in Design Studies, Harvard University
-Sub-Editor, Architects Journal
-Architect, Design Group

Employability
Postgraduate study at the UCL Bartlett Faculty of the Built Environment is situated within a vibrant graduate and research environment, including a large cohort of PhD students and an extensive range of faculty members with interests in architectural history and theory. Students on the Architectural History MA are immersed in one of the world's largest and most innovative centres for architectural history and theory, and are able to engage in innumerable seminars, research representations and other events. Our graduates are highly sought after. Some choose to continue with academic research or teaching, others go on to roles in the visual arts, education, publishing, heritage, design and architecture.

Why study this degree at UCL?

The UCL Bartlett is the UK's largest multidisciplinary built environment faculty, bringing together scientific and professional specialisms required to research, understand, design, construct and operate the buildings and urban environments of the future.

Located in London, it is at the heart of a large cluster of creative architects and engineering firms and has all the resources of a world city at hand.

This MA is the UK's longest established programme in its field, and prioritises the exploration of new and existing methodologies and critical theories as they might be applied to the study of architecture and cities.

Read less
The Built Environment consists of buildings and all other things that have been constructed by human beings. The programme therefore examines the key contemporary issues in the built envirnonment sector. Read more

What is this course about?

The Built Environment consists of buildings and all other things that have been constructed by human beings. The programme therefore examines the key contemporary issues in the built envirnonment sector. It blends theory and practice to ensure that the learner will be able to provide practical ability underpinned with theoretical foundations. In addition, learners will be able to feed into and drive built environment developments, practice and research in the future.

What will I be able to do when I finish the course?
By studying modules in Leadership Strategy & Self-Management, Construction Project Management, BIM Management and Building Economics & Life Cycle Cost Analysis, Research Methods and a Dissertation as well as two electives from the options of Legal Aspects of Management in the Built Environment, Public Procurement of Construction, Energy & Buildings, Retrofitting & Building Fabric and Facilities Management, a graduate will be well placed to take up management positions across the full built environment sector.

Potential employment for graduates:
The course is aimed at improving management competency in the built environment, both on the developer/design team side and contracting side. Graduates of the programme will be ideally qualified to work anywhere across the built environment sector from development, design, procurement, construction and managemet of new buildings or the refurbishment of existing structures.

What follow-on study opportunities are available?

Graduates may pursue Level 10 (PhD) study opportunities upon successful completion of this programme.

What subjects will I study?
Leadership Strategy & Self-Management
Construction Project Management
BIM Management
Building Economics & Life Cycle Cost Analysis
Legal Aspects of Management in Built Environment
Public Procurement of Construction
Retrofitting & Building Fabric
Energy & Buildings
Facilities Management
Research Methods
Dissertation

What are the entry requirements?

A minimum 2nd class Honours Degree in Civil Engineering, Quantity Surveying, Facilities Management, Architectural Technology, Construction Management, Building Surveying, Architecture, Architectural Science or equivalent Degree. Chartered members of built environment professional bodies such as: Chartered Institute of Building, Engineers Ireland, Royal Institute of Architects of Ireland, Society of Chartered Surveyors Ireland.

Candidates with significant experience in the built environment sector (as determined through the Institute’s Recognition of Prior Learning Policy), in addition to an honours primary degree in another discipline area may also be considered for entry.

Applicants applying for entry via routes other than that listed above will be considered on a case-by-case basis through IT Carlow’s RPL system.

For further information contact

Anthony Dempsey
MSc, CPM, HDip, GIS, BEng(Hons), CE, CEng, MIEI
Chartered Engineer
Programme Director
E:
T: 059-9175403

Read less
The hunger for the digital visualisation of architecture and urban environments has grown exponentially in both the Architectural and Film Industries. Read more
The hunger for the digital visualisation of architecture and urban environments has grown exponentially in both the Architectural and Film Industries. As the need for skilled modellers and animators with an awareness of architectural, as well as cinematic, issues increases in both Architecture and Film, the MA in Architectural Visualisation builds on the connections between these two industries. This MA programme develops skills to communicate architecture and urbanity for a variety of applications and audiences.

The MA in Architectural Visualisation is jointly taught by Kent School of Architecture (http://www.kent.ac.uk/architecture/) and the School of Engineering and Digital Arts (http://www.eda.kent.ac.uk/).

The School of Engineering and Digital Arts successfully combines modern engineering and technology with the exciting new field of digital media. The School was established over 40 years ago and has developed a top-quality teaching and research base, receiving excellent ratings in both research and teaching assessments.

Kent School of Architecture is a young school that has built an excellent reputation, based on high quality teaching and excellent resources. For architecture graduate employment prospects, Kent was ranked 6th in the UK in The Times Good University Guide 2014 and 7th in the UK in The Guardian University Guide 2015.

Visit the website https://www.kent.ac.uk/courses/postgraduate/245/architectural-visualisation

Course structure

The MA in Architectural Visualisation is jointly taught by Kent School of Architecture and the School of Engineering and Digital Arts. Building on the successful Master's programmes in Computer Animation and Digital Visual Effects, this MA enables students to develop at an advanced level the skills, knowledge and understanding of digital simulation and 3D modelling which will equip them to become highly skilled professionals in architectural visualisation.

Drawing influence from both architecture and film, this programme offers a progression route into both industries, highlighting the different requirements needed for each profession while exploring the similarities of these markets. In this programme, the professions of architecture, film and animation fuse together, providing students with the ability and understanding to work in each or all of them.

Modules

Stage 1
AR821 - Film and Architecture (15 credits)
AR822 - Virtual Cities (30 credits)
AR823 - Digital Architecture (15 credits)
AR846 - Architectural Photography (15 credits)
EL837 - Professional Group Work (15 credits)
EL868 - High Definition Compositing (15 credits)
EL869 - Film and Video Production (15 credits)
Stage 2
Either
EL870 - Visual Effects Project (60 credits)
OR
AR845 - Independent Research Project (60 credits)

Assessment

Modules are taught over three terms, concluding with a Major Project Visualisation, which accounts for one third of the programme. The content of the visualisation is agreed with programme staff and you build a showreel to a professional standard. Each module is assessed by practical assignments. The project work is assessed on the outcome of the project itself.

Programme aims

This programme aims to:

- enable you to develop advanced level skills, knowledge and understanding of digital simulation and 3D modelling, which will equip you to become a highly skilled professional in architectural visualisation

- train you in the requirements and skills needed for work in high definition

- produce professionally-trained architectural visualisers who are highly skilled in using state-of-the-art 3D modelling and visual effects software

- provide proper academic guidance and welfare support for all students

- create an atmosphere of co-operation and partnership between staff and students, and offer you an environment where you can develop your potential.

Research areas

- Digital Media

The Digital Media group is a multidisciplinary group with interests in many areas including social computing (eg, social networking, computer mediated communication), mobile/ubiquitous computing, human-computer interaction and digital arts (eg, computer games, 3D animation, digital film). Our work is applied across a wide range of domains including e-health, cultural heritage and cyber influence/identity.

Current research themes include:

- interface/interaction design and human-computer interaction
- cyber behaviour/influence
- social computing and sociability design
- natural user interfaces
- virtual worlds
- online communities and computer-mediated communication
- mobile applications
- digital film-making and post-production.

Careers

We have developed our programmes with a number of industrial organisations, which means that successful students are in a strong position to build a long-term career in this important discipline. You develop the skills and capabilities that employers seek, including problem solving, independent thought, report-writing, time management, leadership skills, team-working and good communication.

Building on Kent’s success as the region’s leading institution for student employability, we offer many opportunities for you to gain worthwhile experience and develop the specific skills and aptitudes that employers value.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
Discover how you can shape the environment around you by studying a combination of the technology and the design of the buildings we live and work in. Read more
Discover how you can shape the environment around you by studying a combination of the technology and the design of the buildings we live and work in. This course gives you the flexibility to do just that, at a time and pace convenient to you.

You will have the opportunity to tailor your study to your career ambitions and personal interests as you focus on several projects throughout your course. You could choose to explore commercial or residential buildings or any structures of interest to you. We will help you engage with the creative and technical aspects of the building industry using specialist software including AutoCAD, Revit, Photoshop and Google Sketch Up.

The requirements of buildings for different purposes and in different parts of the world vary hugely - you will study construction technology, construction law and building regulations, enabling you to create comprehensive specifications for the design projects you propose. Your projects will allow your individual design flair to emerge and you will produce a portfolio of work that highlights your skills and knowledge as an architectural technologist.

Visit the website http://courses.leedsbeckett.ac.uk/architecturaltechnology_msc

Mature Applicants

Our University welcomes applications from mature applicants who demonstrate academic potential. We usually require some evidence of recent academic study, for example completion of an access course, however recent relevant work experience may also be considered. Please note that for some of our professional courses all applicants will need to meet the specified entry criteria and in these cases work experience cannot be considered in lieu.

If you wish to apply through this route you should refer to our University Recognition of Prior Learning policy that is available on our website (http://www.leedsbeckett.ac.uk/studenthub/recognition-of-prior-learning.htm).

Please note that all applicants to our University are required to meet our standard English language requirement of GCSE grade C or equivalent, variations to this will be listed on the individual course entry requirements.

Careers

You will graduate with the industry recognised skills and knowledge expected by The Chartered Institute of Architectural Technologists (CIAT). This and your portfolio of work will demonstrate your abilities to prospective employers. You could go on to start your own practice or progress in your current architecture or building surveying role, leading projects of all sizes from start to finish by offering a full architectural design service.

- Architectural Technologist

Careers advice:
The dedicated Jobs and Careers team offers expert advice and a host of resources to help you choose and gain employment. Whether you're in your first or final year, you can speak to members of staff from our Careers Office who can offer you advice from writing a CV to searching for jobs.

View the careers site - https://www.leedsbeckett.ac.uk/employability/jobs-careers-support.htm

Course benefits

A great opportunity to explore your capabilities as an architectural technologist, this course allows you to balance the demands of studying with your everyday commitments so you can continue working while you learn. As a Leeds Beckett student you will be able to register for some software for free and other packages will be available at a discount.

You will be able to complete your projects independently using this specialist software, taking part in regular design review sessions where you can discuss your work as it progresses and seek early feedback and advice from your tutors. All the teaching materials you need will be available on our MyBeckett system to support you as a distance learning student.

Your learning will be mapped against the requirements of The Chartered Institute of Architectural Technologists (CIAT) and what they expect from architectural technology graduates, meaning you will graduate with the high level of skills and knowledge expected in the industry.

Dr Anna Pepe

Senior Lecturer

"If you have a passion for architecture and design, as well as construction and technical drawing, our course is a great option for you. We will help you develop your creativity and communication skills, enhance your problem solving abilities and explore your interests."

Anna joined our University in 2007, having previously studied and worked in Venice and Milan, and has a background in both architecture and architectural technology. Her teaching expertise includes history and theory of architecture, and the design, construction and communication of building projects. Anna’s research activities and interests are related to design and sustainability, the impact of new media on the technical information for construction industry professionals and the way architecture is envisioned and communicated.

Facilities

- Online Library
Global access to Leeds Beckett's extensive online library, plus free eBooks to supercharge your study.

- Dedicated Support Team
Just because you aren't learning on campus doesn't mean you'll have to cope on your own - you'll have the support of a personal tutor along with the University's Student Hub and Wellbeing Centre. They are on hand to offer you advice about everything from academic issues to stress and anxiety.

- Virtual Learning Environment
The VLE gives you access to course materials such as videos, e-books and other documents. You also use it to submit your assignments and to receive feedback.

Find out how to apply here - http://www.leedsbeckett.ac.uk/postgraduate/how-to-apply/

Read less
The MSc in Project Management in the Built Environment is designed to meet the growing demand for project managers in the construction industry who can oversee the entire life cycle of any project, including unique and specialist developments. Read more
The MSc in Project Management in the Built Environment is designed to meet the growing demand for project managers in the construction industry who can oversee the entire life cycle of any project, including unique and specialist developments. It is ideal for anyone with ambitions for project management within the construction sector.

We consult extensively with people from a wide spectrum of companies and organisations in order to make sure that the course content remains practically relevant. For example, prominent companies in the industry are represented in our Professional Liaison Group.

The MSc is available as a one-year, full-time programme or as an open learning programme (a combination of distance learning with intensive on-campus study periods) which is normally taken over two years. There are two entry points: September and January.

See the website http://www.brookes.ac.uk/studying-at-brookes/courses/postgraduate/2015/project-management-in-the-built-environment/

Why choose this course?

- Accreditation by the Chartered Institute of Building (CIOB) and the Royal Institution of Chartered Surveyors (RICS) demonstrates professional recognition of the quality of our programme.

- Strong links with prominent companies in the sector, such as Mace, Willmott Dixon and BAM Construction who are all represented in our Professional Liaison Group (PLG), which exists to provide advice on existing and proposed courses of study, on research activities and consultancy work.

- The programme adopts a problem-based learning (PBL) approach to ensure that it is real-world focused and holistic. Not only is this more effective, it is more fun than the traditional study and examination approach.

- Students develop a whole range of management skills and knowledge including project finance, technology, law and contract by working on real-life or realistic problems as experienced by the construction industry, consultants and clients. They are also exposed to behavioural aspects of managing projects, which most project managers only experience when their careers in the construction industry are well-advanced.
- There are four intensive study weeks during the programme where full-time and open-learning students come together on campus to attend lectures, seminars and workshops and share experiences.

- Our students come from a wide range of backgrounds and locations. Many have originally studied subjects outside the realm of the built environment such as law, psychology, architecture and geography, and others have been or still are (in the case of our open-learning students) employed in project management roles. As a result, there are great opportunities to share experiences, to gain a better understanding of the industry and the range of challenges that project managers face and also to benefit from the many different approaches to problem solving that is a feature of such a diverse group of students.

- Our graduates span the globe, working in countries including Malaysia, India and USA.

- Our teaching is backed up by strong research activity. Many of our academic staff are involved in academic research and/or professional or commercial consultancy work. In the 2008 Research Assessment Exercise, approximately 80% of our research, with our colleagues in other Built Environment areas, was judged to be of ‘international’ quality, with approximately 40% rated as ‘internationally excellent’ or ‘world leading’.

- Many members of staff are part of Brookes' Oxford Institute of Sustainable Development (OISD), a leading research and promotional organisation noted for its work on sustainable technology in buildings and sustainable urban form.

Teaching and learning

Teaching, learning and assessment methods are to a considerable degree determined by the use of problem-based learning (PBL) which leads to a more challenging and industrially relevant course than the traditional lecture approach. Learning takes place through groups of students puzzling through problems, often adapted from real situations with much of the complexity and context intact, using published resources, or reference to experts who are available to offer advice.

Assessment is 100% coursework, which includes a great variety of types of work, including quizzes taken remotely on Moodle (Brookes online learning environment). Material can be downloaded from our virtual learning environment and closed discussions can take place. It also enables on-campus and open-learning students to remain in contact with each other.

In full-time mode, the delivery of new material is generally bi-weekly with intermediate tutorial or seminar sessions. The intensive study weeks and a European field trip, when students in both modes of study come together, complement this delivery pattern. Outside these periods, online learning is the primary mode of learning for distance-learning study. Communication with distance-learning students will be supplemented by email and telephone during the periods off-campus.

Field trips

A European field trip is a compulsory element of the PGCert modules. It typically takes place over a five-day period towards the end of January and is heavily subsidised by the department.

The aim of this field trip is to consolidate the knowledge gained in the early part of the course and to develop team and other relationships through exposing our students to European project management practices and to assess their ability to observe and report on the different approaches to project management in the UK and in a European country.

The field trip normally consists of visits to prominent construction/engineering projects and sites, plus architectural attractions, both en route and at the destination. You are introduced to the development and planning practices at the destination, as well as having the opportunity to visit major complex projects.

Student body

The programme attracts students from diverse backgrounds and locations.

Many of our current students already hold degrees in fields outside the realm of the built environment including law, psychology and geography, and have decided to contribute to the development of the built environment around us by effectively managing projects. They hail from as far afield as Nigeria and India, with backgrounds ranging from languages to architecture.

This diverse group of students bring with them individual responses to the PBL approach that is at the core of our course delivery.

Typically the distance-learning students are employed by a number of different organisations from the private and public sectors in different countries. They have the opportunity to share their experiences in order to gain better understanding of the industry, the range of challenges that project managers face, and therefore the breadth of skills that they need to develop in order to perform successfully.

Our full-time students benefit from contact with the open-learning students engaged in project management roles in a variety of built environment projects across many countries.

Careers

Graduates of the Department of Real Estate and Construction have an outstanding employment record. Local and national construction companies, developers, project managers, house builders, surveyors and housing associations regularly recruit our graduates.

Many of these companies visit the department annually to meet students for graduate positions. Our graduates are recognised as having an excellent level of communication, presentation and problem-solving skills.

All of our open-learning students are employed full-time by prominent companies in the sector.

Full-time students find similar employment shortly after graduation. They typically hold (Assistant) Project Manager positions. However, the breadth of knowledge that our students gain gives them the flexibility to function effectively in a number of different roles.

Free language courses for students - the Open Module

Free language courses are available to full-time undergraduate and postgraduate students on many of our courses, and can be taken as a credit on some courses.

Please note that the free language courses are not available if you are:
- studying at a Brookes partner college
- studying on any of our teacher education courses or postgraduate education courses.

Research highlights

Our teaching is backed by strong research activity. Many of our academic staff are involved in academic research and/or professional/commercial consultancy work.

Areas of interest include:
- sustainability, adaptation and resilience to climate change
- collaborative supply networks for procurement and delivery of project
- building economics
- forecasting techniques
- risk management
- social networks in project environments
- managing complex projects
- management of knowledge and innovation as a source of competitive advantage/li>
- adaptive re-use of existing buildings
- facilities management
- health and safety.

Many members of staff are part of the Oxford Institute of Sustainable Development (OISD). This research and promotional organisation is noted for its work on sustainable technology in buildings and sustainable urban form among many on-going projects.

A recent HEFCE report into sustainable development in higher education in England suggests that the OISD is one of the key players in sustainable development research.

Read less
With extensive experience analysing and controlling the physical phenomena affecting buildings, practitioners of Architectural Science have a profound impact on the function, aesthetics and efficiency of architectural spaces. Read more
With extensive experience analysing and controlling the physical phenomena affecting buildings, practitioners of Architectural Science have a profound impact on the function, aesthetics and efficiency of architectural spaces.

Architectural Science courses can be taken as single or double streams. In the double stream program, the core units from the secondary degree are taken as the electives in the primary degree. The double stream program is completed as 96 credit points over two years, allowing you to draw expertise from an aligned Architectural Science stream and prepare to pursue or develop your career within a wide range of areas in the built environment.

PRIMARY STREAM

The High Performance Buildings program at the University of Sydney is unique in Australia. It offers the opportunity to pursue or develop an exciting career in the built environment field within a wide range of areas including building services, facilities management, architectural practice, business, sustainable design commercial development, property management and more. It is open to graduates from a range of disciplines including science, engineering, architecture, building and planning.

Created in close consultation with industry stakeholders, the program will train professionals who can collaborate with designers, construction teams and facilities managers to achieve sustainable outcomes that raise the bar for world's best practice. Studying with us, you will have access to world-class equipment and facilities, including the Indoor Environment Quality (IEQ) laboratory for research into the interaction of temperature, humidity, air movement and quality, ventilation, daylight, artificial lighting, sound and acoustics. You will be equipped with the professional skills to ensure maximum operational efficiencies, optimal comfort and ideal health outcomes for occupants of corporate and residential environments.

SECONDARY STREAM

Sustainable design involves an approach to creating buildings that meets the world's need to reduce our impact on ecological systems. The built environment professions - including architects, engineers, urban designers and planners - are increasingly held responsible for the performance of their designs and projects, including accordance with promised environmental principles. Sustainable design skills are highly demanded by the construction and design industries, environmental consultancies, government agencies and in the day-to-day operation and management of commercial buildings. This program is tailored for design and related built-environment professionals who wish to improve their knowledge and skills in sustainable design.

Our integrated approach to Sustainable Design provides you with the knowledge you need to address sustainability considerations without compromising building functionality or profitability. You will combine the aesthetic approaches to design with a thorough understanding of energy efficiency, analysis and performance metrics. You will be exposed to ratings systems, myriad testing methods and will come to understand energy and resource use from ecological, economic and governance perspectives, as well as the storage and release of energy and how to design for both performance and comfort.

To ask a question about this course, visit http://sydney.edu.au/internationaloffice/

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X