• Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Loughborough University Featured Masters Courses
  • University of Leeds Featured Masters Courses
  • Queen Mary University of London Featured Masters Courses
  • Ulster University Featured Masters Courses
  • Arden University Featured Masters Courses
  • Loughborough University London Featured Masters Courses
  • Durham University Featured Masters Courses
Cranfield University Featured Masters Courses
Cass Business School Featured Masters Courses
University of Hertfordshire Featured Masters Courses
Institute for Advanced Architecture of Catalonia Featured Masters Courses
Bath Spa University Featured Masters Courses
"antenna"×
0 miles

Masters Degrees (Antenna)

  • "antenna" ×
  • clear all
Showing 1 to 15 of 20
Order by 
This MSc programme targets the needs of a rapidly evolving telecommunications sector and provides an industrially relevant and exciting qualification in the latest broadband and mobile technologies being employed and developed. Read more
This MSc programme targets the needs of a rapidly evolving telecommunications sector and provides an industrially relevant and exciting qualification in the latest broadband and mobile technologies being employed and developed.

Study the techniques and technologies that enable broadband provision through fixed and wireless/mobile networks, and that modernise the core networks to provide ultra-high bit-rates and multi-service support. The Broadband and Mobile Communication Networks MSc at Kent is well-supported by companies and research establishments in the UK and overseas.

The programme reflects the latest issues and developments in the telecommunications industry, delivering high-quality systems level education and training. Gain deep knowledge of next-generation wireless communication systems including antenna technology, components and systems, and fibre optic and converged access networks.

Visit the website https://www.kent.ac.uk/courses/postgraduate/247/broadband-mobile-communication-networks

About the School of Engineering and Digital Arts

The School of Engineering and Digital Arts (http://www.eda.kent.ac.uk/) successfully combines modern engineering and technology with the exciting field of digital media. The School was established over 40 years ago and has developed a top-quality teaching and research base, receiving excellent ratings in both research and teaching assessments.

The School undertakes high-quality research that has had significant national and international impact, and our expertise allows us to respond rapidly to new developments. Our 30 academic staff and over 130 postgraduate students and research staff provide an ideal focus to effectively support a high level of research activity. We have a thriving student population studying for postgraduate degrees in a friendly and supportive teaching and research environment.

We have research funding from the Research Councils UK, European research programmes, industrial and commercial companies and government agencies including the Ministry of Defence. Our Electronic Systems Design Centre and Digital Media Hub provide training and consultancy for a wide range of companies. Many of our research projects are collaborative, and we have well-developed links with institutions worldwide.

Modules

The following modules are indicative of those offered on this programme. This list is based on the current curriculum and may change year to year in response to new curriculum developments and innovation. Most programmes will require you to study a combination of compulsory and optional modules. You may also have the option to take modules from other programmes so that you may customise your programme and explore other subject areas that interest you.

EL872 - Wireless/Mobile Communications (15 credits)
EL873 - Broadband Networks (15 credits)
EL822 - Communication Networks (15 credits)
EL827 - Signal & Communication Theory II (15 credits)
EL849 - Research Methods & Project Design (30 credits)
EL871 - Digital Signal Processing (DSP) (15 credits)
EL891 - System and Circuit Design (15 credits)
EL892 - Satellite and Optical Communication Systems (15 credits)
EL890 - MSc Project (60 credits)

Assessment

The project module is examined by a presentation and dissertation. The Research Methods and Project Design module is examined by several components of continuous assessment. The other modules are assessed by examinations and smaller components of continuous assessment. MSc students must gain credit from all the modules. For the PDip, you must gain at least 120 credits in total, and pass certain modules to meet the learning outcomes of the PDip programme.

Programme aims

This programme aims to:

- educate graduate engineers and equip them with advanced knowledge of telecommunications and communication networks (including mobile systems), informed by insights and problems at the forefront of these fields of study, for careers in research and development in industry or academia

- produce high-calibre engineers with experience in specialist and complex problem-solving skills and techniques needed for the interpretation of knowledge and for systems level design in the telecommunications field

- provide you with proper academic guidance and welfare support

- create an atmosphere of co-operation and partnership between staff and students, and offer you an environment where you can develop your potential

- strengthen and expand opportunities for industrial collaboration with the School of Engineering and Digital Arts.

Research areas

- Communications

The Group’s activities cover system and component technologies from microwave to terahertz frequencies. These include photonics, antennae and wireless components for a broad range of communication systems. The Group has extensive software research tools together with antenna anechoic chambers, network and spectrum analysers to millimetre wave frequencies and optical signal generation, processing and measurement facilities.

Current main research themes include:

- photonic components
- networks/wireless systems
- microwave and millimetre-wave systems
- antenna systems
- radio-over-fibre systems
- electromagnetic bandgaps and metamaterials
- frequency selective surfaces.

Careers

We have developed the programme with a number of industrial organisations, which means that successful students will be in a strong position to build a long-term career in this important discipline.

School of Engineering and Digital Arts has an excellent record of student employability. We are committed to enhancing the employability of all our students, to equip you with the skills and knowledge to succeed in a competitive, fast-moving, knowledge-based economy.

Graduates who can show that they have developed transferable skills and valuable experience are better prepared to start their careers and are more attractive to potential employers. Within the School of Engineering and Digital Arts, you can develop the skills and capabilities that employers are looking for. These include problem solving, independent thought, report-writing, time management, leadership skills, team-working and good communication.

Building on Kent’s success as the region’s leading institution for student employability, we offer many opportunities for you to gain worthwhile experience and develop the specific skills and aptitudes that employers value.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
The School of Engineering and Digital Arts offers research-led degrees in a wide range of research disciplines, related to Electronic, Control and Information Engineering, in a highly stimulating academic environment. Read more
The School of Engineering and Digital Arts offers research-led degrees in a wide range of research disciplines, related to Electronic, Control and Information Engineering, in a highly stimulating academic environment. The School enjoys an international reputation for its work and prides itself in allowing students the freedom to realise their maximum potential.

Established over 40 years ago, the School has developed a top-quality teaching and research base, receiving excellent ratings in both research and teaching assessments.

We undertake high-quality research that has had significant national and international impact, and our spread of expertise allows us to respond rapidly to new developments. Our 30 academic staff and over 130 postgraduate students and research staff provide an ideal focus to effectively support a high level of research activity. There is a thriving student population studying for postgraduate degrees in a friendly and supportive teaching and research environment.

We have research funding from the Research Councils UK, European research programmes, a number of industrial and commercial companies and government agencies including the Ministry of Defence. Our Electronic Systems Design Centre and Digital Media Hub provide training and consultancy for a wide range of companies. Many of our research projects are collaborative, and we have well-developed links with institutions worldwide.

Visit the website https://www.kent.ac.uk/courses/postgraduate/262/electronic-engineering

Project opportunities

Some projects available for postgraduate research degrees (http://www.eda.kent.ac.uk/postgraduate/projects_funding/pgr_projects.aspx).

Research areas

- Communications

The Group’s activities cover system and component technologies from microwave to terahertz frequencies. These include photonics, antennae and wireless components for a broad range of communication systems. The Group has extensive software research tools together with antenna anechoic chambers, network and spectrum analysers to millimetre wave frequencies and optical signal generation, processing and measurement facilities. Current research themes include:

- photonic components
- networks/wireless systems
- microwave and millimetre-wave systems
- antenna systems
- radio-over-fibre systems
- electromagnetic bandgaps and metamaterials
- frequency selective surfaces.

- Intelligent Interactions:

The Intelligent Interactions group has interests in all aspects of information engineering and human-machine interactions. It was formed in 2014 by the merger of the Image and Information Research Group and the Digital Media Research Group.

The group has an international reputation for its work in a number of key application areas. These include: image processing and vision, pattern recognition, interaction design, social, ubiquitous and mobile computing with a range of applications in security and biometrics, healthcare, e-learning, computer games, digital film and animation.

- Social and Affective Computing
- Assistive Robotics and Human-Robot Interaction
- Brain-Computer Interfaces
- Mobile, Ubiquitous and Pervasive Computing
- Sensor Networks and Data Analytics
- Biometric and Forensic Technologies
- Behaviour Models for Security
- Distributed Systems Security (Cloud Computing, Internet of Things)
- Advanced Pattern Recognition (medical imaging, document and handwriting recognition, animal biometrics)
- Computer Animation, Game Design and Game Technologies
- Virtual and Augmented Reality
- Digital Arts, Virtual Narratives.

- Instrumentation, Control and Embedded Systems:

The Instrumentation, Control and Embedded Systems Research Group comprises a mixture of highly experienced, young and vibrant academics working in three complementary research themes – embedded systems, instrumentation and control. The Group has established a major reputation in recent years for solving challenging scientific and technical problems across a range of industrial sectors, and has strong links with many European countries through EU-funded research programmes. The Group also has a history of industrial collaboration in the UK through Knowledge Transfer Partnerships.

The Group’s main expertise lies primarily in image processing, signal processing, embedded systems, optical sensors, neural networks, and systems on chip and advanced control. It is currently working in the following areas:

- monitoring and characterisation of combustion flames
- flow measurement of particulate solids
- medical instrumentation
- control of autonomous vehicles
- control of time-delay systems
- high-speed architectures for real-time image processing
- novel signal processing architectures based on logarithmic arithmetic.

Careers

We have developed our programmes with a number of industrial organisations, which means that successful students are in a strong position to build a long-term career in this important discipline. You develop the skills and capabilities that employers are looking for, including problem solving, independent thought, report-writing, time management, leadership skills, team-working and good communication.

Kent has an excellent record for postgraduate employment: over 94% of our postgraduate students who graduated in 2013 found a job or further study opportunity within six months.

Building on Kent’s success as the region’s leading institution for student employability, we offer many opportunities for you to gain worthwhile experience and develop the specific skills and aptitudes that employers value.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
This programme will not have a 2016 intake as the content is being extensively improved. A one-year course that will provide engineering and science graduates with a thorough knowledge of modern radio and mobile communication systems. Read more

NOTE

This programme will not have a 2016 intake as the content is being extensively improved.

A one-year course that will provide engineering and science graduates with a thorough knowledge of modern radio and mobile communication systems.

AIM OF COURSE

Mobile radio encompasses a diversity of communications requirements and technical solutions including cellular mobile radio and data systems (eg GSM, GPRS, 3G, 4G, WiMax) and Personal Mobile Radio as well as various indoor radio systems including Bluetooth, WIFI, Wireless Indoor Networks (WINs or LANs). In view of the huge size of the market for these enhanced systems providing flexible personal communications, it is important that industry equips itself to meet this challenge. This MSc course aims to provide industry with graduates who possess a thorough knowledge both of actual modern radio systems and of the fundamental principles and design constraints embodied in those systems.

COURSE STRUCTURE

The course spans 50 weeks of full-time study and is divided into teaching and project modules. The teaching block is based on 6 modular courses, each comprising approximately 40 hours of lectures (or lecture equivalents) with additional directed study and practical work. All of these modules are augmented by specific case studies, applications and tutorials.

COURSE HIGHLIGHTS

Radio Systems Engineering
A radio receiver design is analysed in detail so that design compromises may be understood. Topics include gain, selectivity, noise figure, dynamic range, intermodulation, spurious output, receiver structures, mixers, oscillators, PLL synthesis, filters and future design trends. This course also includes familiarisation with industry - standard design packages. Introduces key concepts in conventional and novel antenna design. It incovers the following topics: basic antenna structures (eg wire, reflector, patch and helical antennas); design considerations for fixed and mobile communication systems; phased array antennas; conformal and volume arrays; array factor and pattern multiplication; mutual coupling; isolated and embedded element patterns; active match; true time delay systems; pattern synthesis techniques; adaptive antennas; adaptive beamforming and nulling.

Mobile Radio Systems and Propagation
The aim of this module is to investigate the nature of radio propagation in mobile radio environments. This will be achieved through the examination of several modern mobile radio systems. The effects of the propagation environment will also be considered.

Spectrum Management and Utilization
The electromagnetic spectrum is a finite resource which has to be properly managed. This module will address issues related to spectrum management. Topics covered will include: spectrum as a resource; space, time and bandwidth; international regulation organisations and control methods; definitions of spectrum utilisation and spectrum utilisation efficiency; spectrum-consuming properties of radio systems; protection ratio; frequency dependent rejection and the F-D curve; spectrum management tools, models and databases; spectrally-efficient techniques; efficient use of the spectrum.

Electromagnetic Compatability (EMC)
This module provides an introduction to EMC. Topics include fundamental EM interactions and how these give rise to potential incompatibilities between systems; current EMC legislation; test environments and test facilities.

Communication Systems and Digital Signal Processing
Students are introduced to a range of concepts underpinning communications system design. DSP topics include the theory and applications of: real-time DSP concepts/devices; specialist filter applications; A/D and D/A interface technology; review of Fourier/digital filter applicable to DSP; modem design: modulation, demodulation, synchronisation, equalisation; signal analysis and synthesis in time and frequency domain; hands-on experience of DSP tools and DSP applications.

Low Power/Low Voltage Design and VHDL
This module introduces the low power and low voltage design requirements brought about by increasingly small scale sizes of circuit integration. The module also introduces students to VHDL, which is widely used in industry today.

Design Exercise (RF Engineering)
This self-contained exercise aims to introduce the student to aspects of RF engineering, system specification, design and implementation. A design, such as a 2GHz receiver, will be taken through to practical implementation.

Radio Frequency and Microwave Measurements
This covers the theory of EM waves, propagation and scattering. It introduces the student to methods and instruments to measure important EM wave properties such as power and reflection coeffcients.

Active RF and Microwave Circuits
This module provides the student with an appreciation of; noise in microwave systems (basic theory, sources of noise, noise power and temperature, noise figure and measurement of noise); detectors and mixers (diodes and rectification, PIN diodes, single ended mixers, balanced mixers, intermodulation products); microwave amplifiers and oscillators (microwave bipolar transistors and FETs, gain and stability, power gain, design of single stage transistor amlifier, conjugate matching, low noise amplifier design and transistor oscillator design).

PROJECT MODULE
Following a course on research skills and project planning, each student carries out one major project from Easter to September focusing on a real industrial problem. Some projects are carried out ‘on-site’ with our local and national industrial partners. The basics of project planning and structure are taught and supervision will be given whilst the student is writing a dissertation for submission at the end of the course.

Read less
An MSc-level conversion programme for those with first degrees in numerate disciplines (e.g. Maths, Physics, others with some mathematics to pre-university level should enquire). Read more
An MSc-level conversion programme for those with first degrees in numerate disciplines (e.g. Maths, Physics, others with some mathematics to pre-university level should enquire). The programme targets producing engineers with the knowledge and skills required for working in the communications industry on programmable hardware, in particular. There is a high demand for people to fill such roles in communications and test & measure equipment vendors, and in many smaller companies developing devices for the internet of things.

The huge growth of interconnected devices expected in the Internet of Things and the goals of flexible, high-speed wireless connections for 5G mobile networks and beyond, require programmable, embedded electronics to play a vital role. From the development of small, intelligence sensors to the design of large-scale network hardware that can be functionally adaptive in software-defined networking, there is a huge demand for advanced embedded electronics knowledge and skills in the communications sector.

Visit the website https://www.kent.ac.uk/courses/postgraduate/1223/embedded-communications-engineering

About the School of Engineering and Digital Arts

The School of Engineering and Digital Arts successfully combines modern engineering and technology with the exciting field of digital media.

Established over 40 years ago, the School has developed a top-quality teaching and research base, receiving excellent ratings in both research and teaching assessments.

The School undertakes high-quality research that has had significant national and international impact, and our spread of expertise allows us to respond rapidly to new developments. Our 30 academic staff and over 130 postgraduate students and research staff provide an ideal focus to effectively support a high level of research activity. There is a thriving student population studying for postgraduate degrees in a friendly and supportive teaching and research environment.

Modules

The following modules are indicative of those offered on this programme. This list is based on the current curriculum and may change year to year in response to new curriculum developments and innovation. Most programmes will require you to study a combination of compulsory and optional modules. You may also have the option to take modules from other programmes so that you may customise your programme and explore other subject areas that interest you.

EL829 - Embedded Real-Time Operating Systems (15 credits)
EL849 - Research Methods & Project Design (30 credits)
EL893 - Reconfigurable Architectures (15 credits)
EL896 - Computer and Microcontroller Architectures (15 credits)
EL822 - Communication Networks (15 credits)
EL827 - Signal & Communication Theory II (15 credits)
EL871 - Digital Signal Processing (DSP) (15 credits)
EL872 - Wireless/Mobile Communications (15 credits)
EL873 - Broadband Networks (15 credits)
EL890 - MSc Project (60 credits)

Research areas

- Communications

The Group’s activities cover system and component technologies from microwave to terahertz frequencies. These include photonics, antennae and wireless components for a broad range of communication systems. The Group has extensive software research tools together with antenna anechoic chambers, network and spectrum analysers to millimetre wave frequencies and optical signal generation, processing and measurement facilities. Current research themes include:

- photonic components
- networks/wireless systems
- microwave and millimetre-wave systems
- antenna systems
- radio-over-fibre systems
- electromagnetic bandgaps and metamaterials
- frequency selective surfaces.

- Intelligent Interactions:

The Intelligent Interactions group has interests in all aspects of information engineering and human-machine interactions. It was formed in 2014 by the merger of the Image and Information Research Group and the Digital Media Research Group.

The group has an international reputation for its work in a number of key application areas. These include: image processing and vision, pattern recognition, interaction design, social, ubiquitous and mobile computing with a range of applications in security and biometrics, healthcare, e-learning, computer games, digital film and animation.

- Social and Affective Computing
- Assistive Robotics and Human-Robot Interaction
- Brain-Computer Interfaces
- Mobile, Ubiquitous and Pervasive Computing
- Sensor Networks and Data Analytics
- Biometric and Forensic Technologies
- Behaviour Models for Security
- Distributed Systems Security (Cloud Computing, Internet of Things)
- Advanced Pattern Recognition (medical imaging, document and handwriting recognition, animal biometrics)
- Computer Animation, Game Design and Game Technologies
- Virtual and Augmented Reality
- Digital Arts, Virtual Narratives.

- Instrumentation, Control and Embedded Systems:

The Instrumentation, Control and Embedded Systems Research Group comprises a mixture of highly experienced, young and vibrant academics working in three complementary research themes – embedded systems, instrumentation and control. The Group has established a major reputation in recent years for solving challenging scientific and technical problems across a range of industrial sectors, and has strong links with many European countries through EU-funded research programmes. The Group also has a history of industrial collaboration in the UK through Knowledge Transfer Partnerships.

The Group’s main expertise lies primarily in image processing, signal processing, embedded systems, optical sensors, neural networks, and systems on chip and advanced control. It is currently working in the following areas:

- monitoring and characterisation of combustion flames
- flow measurement of particulate solids
- medical instrumentation
- control of autonomous vehicles
- control of time-delay systems
- high-speed architectures for real-time image processing
- novel signal processing architectures based on logarithmic arithmetic.

Careers

The programme targets producing engineers with the knowledge and skills required for working in the communications industry on programmable hardware, in particular. There is a high demand for people to fill such roles in communications and test & measure equipment vendors, and in many smaller companies developing devices for the internet of things.

Kent has an excellent record for postgraduate employment: over 94% of our postgraduate students who graduated in 2013 found a job or further study opportunity within six months.

We have developed our programmes with a number of industrial organisations, which means that successful students are in a strong position to build a long-term career in this important discipline. You develop the skills and capabilities that employers are looking for, including problem solving, independent thought, report-writing, time management, leadership skills, team-working and good communication.

Find out how to apply here - https://www.kent.ac.uk/courses/postgraduate/apply/

Read less
This course provides an up-to-date view of communication systems and networking, including RF and microwave systems design. The syllabus covers. Read more
This course provides an up-to-date view of communication systems and networking, including RF and microwave systems design. The syllabus covers:
-Digital communication theory
-Signal processing tools
-Microwave and optical circuit design techniques
-System level design of sensors
-Mobile and optical communication networks

The course is aimed at those with some previous undergraduate knowledge of communication engineering wanting to enhance their skills to an advanced level for a career in the communications industry. The course also serves as an excellent introduction for those wanting to pursue a career in research or wanting to study for a PhD.

Course description

This course provides an up-to-date view of communication systems and networking, including RF and microwave systems design. The syllabus covers:
-Digital communication theory
-Signal processing tools
-Microwave and optical circuit design techniques
-System level design of sensors
-Mobile and optical communication networks

The course is aimed at those with some previous undergraduate knowledge of communication engineering wanting to enhance their skills to an advanced level for a career in the communications industry. The course also serves as an excellent introduction for those wanting to pursue a career in research or wanting to study for a PhD.

Course unit details

The first semester contains mainly fundamental material on communication theory, signal analysis, antenna and microwave circuit design principles. The second semester covers the advanced material on wireless and optical communication systems and networks.

The first semester course work is examined in January while the second semester work is examined in May. Course work marks also contribute to the assessment.

The final four months of the programme, during the summer, are devoted to the dissertation project. Projects with industrial involvement are encouraged.

Career opportunities

On graduating you will be able to enter directly all areas of the modern communications/telecommunications engineering industry, including the fast growing mobile and wireless technology sectors. You will also be well prepared to begin PhD research programmes, which may lead to careers in research establishments and universities.

Read less
This Masters in Telecommunications Engineering is accredited by IET and meets Chartered Engineer Status. Excel in the latest telecommunications technologies on this industry focused Liverpool John Moores University postgraduate course. Read more
This Masters in Telecommunications Engineering is accredited by IET and meets Chartered Engineer Status. Excel in the latest telecommunications technologies on this industry focused Liverpool John Moores University postgraduate course

•Complete this masters degree in one year (full time)
•Study at one the UK’s leading Engineering Schools
•Accredited by the Institution of Engineering and Technology (IET) and meets Chartered Engineer requirements
•Programme informed by internationally-acclaimed research in LJMU’s Electrical and Electronic Engineering Research Centre
•Close industry links
•Excellent career opportunities for positions including system designers, analysts, and senior engineers in the fields communications, computer networks and telecommunications

The MSc in Telecommunications Engineering is designed to develop engineers for the telecommunications industry who are able to design, commission, and manage telecommunications systems.

The programme benefits from being delivered by academics from LJMU’s School of Engineering, Technology and Maritime Operations, the General Engineering Research Institute (GERI) and the School of Computing and Mathematical Sciences.

The course team has strong industrial links and has established an international research profile. This is reflected in the programme securing accreditation by the Institution of Engineering and Technology (IET) - formerly the IEE - to meet its requirements for Chartered Engineer status.

The course covers radio frequency and microwave technologies, electronics and communications technologies, computer networks and wireless computing, and management.

The curriculum emphasises the application of the technologies and as such the course is supported by modern systems of modelling and simulation, an extensive laboratory programme and lectures from industrial experts.

You will have an opportunity to complete industrially-based projects and work experience in the areas of microwave, optical sensing, instrumentation, antenna design, etc.

Most of the MSc projects are undertaken in the Radio Frequency and Microwave research group within the General Engineering Research Institute. Research interests are concentrated into six main areas: Radio Frequency and Microwave (RFM) Applications, Underwater Communications, Radio Frequency Identification Technology (RFID) and wireless Applications, Sustainable Technologies, Non-destructive sensing and Terahertz laser sources.

LJMU’s international reputation in this field is reflected in the substantial research funds secured from the UK Engineering and Physical Sciences Research Council (EPSRC), Department of Trade and Industry, Envirolink, European Community and directly from industry including BP, United Utilities, Organon, Protensive, MercaChem and Biotage, Aspen Electronic, Anritsu and NEL.

Please see guidance below on core and option modules for further information on what you will study.
Level 7
Digital communications systems
Wireless networks and technologies
Telecommunications systems
Networks and protocols
Transmission media
Research skills
Modelling with Matlab and Simulink
MSc project
Advanced signal processing
Operations research
Safety and reliability
Project management
Programming for engineering
LabVIEW
Professional and leadership skills


Further guidance on modules
The information listed in the section entitled ‘What you will study’ is an overview of the academic content of the programme that will take the form of either core or option modules. Modules are designated as core or option in accordance with professional body requirements and internal Academic Framework review, so may be subject to change. Students will be required to undertake modules that the University designates as core and will have a choice of designated option modules. Additionally, option modules may be offered subject to meeting minimum student numbers.

Academic Framework reviews are conducted by LJMU from time to time to ensure that academic standards continue to be maintained. A review is currently in progress and will be operational for the academic year 2016/2017. Final details of this programme’s designated core and option modules will be made available on LJMU’s website as soon as possible and prior to formal enrolment for the academic year 2016/2017.

Please email if you require further guidance or clarification.

Read less
Study the dynamic field of efficient information transfer around the globe. We teach this course jointly with the Department of Computer Science so you get up-to-date knowledge and understanding. Read more

About the course

Study the dynamic field of efficient information transfer around the globe. We teach this course jointly with the Department of Computer Science so you get up-to-date knowledge and understanding.

Our graduates are in demand

Many go to work in industry as engineers for large national and international companies, including ARUP, Ericsson Communications, HSBC, Rolls-Royce, Jaguar Land Rover and Intel Asia Pacific.

Real-world applications

This is a research environment. What we teach is based on the latest ideas. The work you do on your course is directly connected to real-world applications.

We work with government research laboratories, industrial companies and other prestigious universities. Significant funding from UK research councils, the European Union and industry means you have access to the best facilities.

How we teach

You’ll be taught by academics who are leaders in their field. The 2014 Research Excellence Framework (REF) puts us among the UK top five for this subject. Our courses are centred around finding solutions to problems, in lectures, seminars, exercises and through project work.

Accreditation

All of our MSc courses are accredited by the Institution of Engineering and Technology (IET), except the MSc(Eng) Advanced Electrical Machines, Power Electronics and Drives and MSc(Eng) Bioengineering: Imaging and Sensing. We are seeking accreditation for these courses.

First-class facilities

Semiconductor Materials and Devices

LED, laser photodetectors and transistor design, a high-tech field-emission gun transmission electron microscope (FEGTEM), a focused ion beam (FIB) milling facility, and electron beam lithographic equipment.

Our state-of-the-art semiconductor growth and processing equipment is housed in an extensive clean room complex as part of the EPSRC’s National Centre for III-V Technologies.

Our investment in semiconductor research equipment in the last 12 months totals £6million.

Electrical Machines and Drives

Specialist facilities for the design and manufacture of electromagnetic machines, dynamometer test cells, a high-speed motor test pit, environmental test chambers, electronic packaging and EMC testing facilities, Rolls-Royce University Technology Centre for Advanced Electrical Machines and Drives.

Communications

Advanced anechoic chambers for antenna design and materials characterisation, a lab for calibrated RF dosimetry of tissue to assess pathogenic effects of electromagnetic radiation from mobile phones, extensive CAD electromagnetic analysis tools.

Core modules

Network and Inter-Network Architectures; Network Performance Analysis; Data Coding Techniques for Communications and Storage; Advanced Communication Principles; Mobile Networks and Physical Layer Protocols; (either) Foundations of Object-Orientated Programming (or) Object-Orientated Programming and Software Design; Major Research Project.

Examples of optional modules

Computer Security and Forensics; 3D Computer Graphics; Software Development for Mobile Devices; Cloud Computing; Advanced Signal Processing; Antennas, Propagation and Satellite Systems; Optical Communication Devices and Systems; Computer Vision; Broadband Wireless Techniques; Wireless Packet Data Networks and Protocols; System Design.

Teaching and assessment

We deliver research-led teaching from our department and Computer Science with individual support for your research project and dissertation. Assessment is by examinations, coursework and a project dissertation with poster presentation.

Read less
This is a research environment. What we teach is based on the latest ideas. The work you do on your course is directly connected to real-world applications. Read more

Real-world applications

This is a research environment. What we teach is based on the latest ideas. The work you do on your course is directly connected to real-world applications.

We work with government research laboratories, industrial companies and other prestigious universities. Significant funding from UK research councils, the European Union and industry means you have access to the best facilities.

How we teach

You’ll be taught by academics who are leaders in their field. The 2014 Research Excellence Framework (REF) puts us among the UK top five for this subject. Our courses are centred around finding solutions to problems, in lectures, seminars, exercises and through project work.

Accreditation

All of our MSc courses are accredited by the Institution of Engineering and Technology (IET), except the MSc(Eng) Advanced Electrical Machines, Power Electronics and Drives and MSc(Eng) Bioengineering: Imaging and Sensing. We are seeking accreditation for these courses.

First-class facilities

Semiconductor Materials and Devices

LED, laser photodetectors and transistor design, a high-tech field-emission gun transmission electron microscope (FEGTEM), a focused ion beam (FIB) milling facility, and electron beam lithographic equipment.

Our state-of-the-art semiconductor growth and processing equipment is housed in an extensive clean room complex as part of the EPSRC’s National Centre for III-V Technologies.

Our investment in semiconductor research equipment in the last 12 months totals £6million.

Electrical Machines and Drives

Specialist facilities for the design and manufacture of electromagnetic machines, dynamometer test cells, a high-speed motor test pit, environmental test chambers, electronic packaging and EMC testing facilities, Rolls-Royce University Technology Centre for Advanced Electrical Machines and Drives.

Communications

Advanced anechoic chambers for antenna design and materials characterisation, a lab for calibrated RF dosimetry of tissue to assess pathogenic effects of electromagnetic radiation from mobile phones, extensive CAD electromagnetic analysis tools.

Core modules

Semiconductor Materials; Principles of Semiconductor Device Technology; Packaging and Reliability of Microsystems; Nanoscale Electronic Devices; Energy Efficient Semiconductor Devices; Optical Communication Devices and Systems; Compound Semiconductor Device Manufacture; Major Research Project.

Teaching and assessment

Research-led teaching, lectures, laboratories, seminars and tutorials. A large practical module covers the design, manufacture and characterisation of a semiconductor component, such as a laser or light emitting diode. This involves background tutorials and hands-on practical work in the UK’s national III-V semiconductor facility. Assessment is by examinations, coursework or reports, and a dissertation with poster presentation.

Read less
If you have a general engineering and/or science background, this course will provide you with the additional knowledge and skills required to become a power engineer. Read more
If you have a general engineering and/or science background, this course will provide you with the additional knowledge and skills required to become a power engineer.

If you already have an electrical engineering or electronics background, the course enables you to update your knowledge to include the latest developments in renewable energy (including energy from the environment) and smart grids, making use of modern sensing, communication and signal- processing technologies.

The programme consists of five core taught modules, covering the fundamental aspects of the modern power systems and energy conversion technologies that are core in renewable generation and energy storage. You’ll also select three modules (from a choice of six options) to study ‘non-electrical’ technologies that are crucial to the safe and reliable operation of power and energy systems. Alongside the taught modules, you’ll carry out a supervised research/development project that is relevant to real-world industrial needs.

Course Structure

The MSc degree (totalling 180 credits) comprises:
-Eight taught modules (15 credits each), five core modules and three optional modules (see below)
-A research project worth 60 credits (see below)

Core modules

-Electrical Machines and Drives
-Fuel Cells and Energy Storage
-Operation and Control of Power Systems
-Power Electronic Converters and Devices
-Renewable Energy from the Environment

Optional modules (choose 3)

-ASICs, MEMS and Smart Devices
-Heat Transfer Theory and Design
-Optical Communication Systems
-Signal & Image Processing
-Systems Modelling and Simulation
-Antenna, Propagation and Wireless Communication Theory

Individual project

The individual research project is an in-depth experimental, theoretical or computational investigation of a topic chosen by you in conjunction with an academic supervisor.

Read less
Study the key design aspects of a modern wireless communication system, in particular cellular mobile radio systems. There is a current shortage of communications engineers with a comprehensive appreciation of wireless system design from RF through baseband to packet protocols. Read more

About the course

Study the key design aspects of a modern wireless communication system, in particular cellular mobile radio systems. There is a current shortage of communications engineers with a comprehensive appreciation of wireless system design from RF through baseband to packet protocols.

Our graduates are in demand

Many go to work in industry as engineers for large national and international companies, including ARUP, Ericsson Communications, HSBC, Rolls-Royce, Jaguar Land Rover and Intel Asia Pacific.

Real-world applications

This is a research environment. What we teach is based on the latest ideas. The work you do on your course is directly connected to real-world applications.

We work with government research laboratories, industrial companies and other prestigious universities. Significant funding from UK research councils, the European Union and industry means you have access to the best facilities.

How we teach

You’ll be taught by academics who are leaders in their field. The 2014 Research Excellence Framework (REF) puts us among the UK top five for this subject. Our courses are centred around finding solutions to problems, in lectures, seminars, exercises and through project work.

Accreditation

All of our MSc courses are accredited by the Institution of Engineering and Technology (IET), except the MSc(Eng) Advanced Electrical Machines, Power Electronics and Drives and MSc(Eng) Bioengineering: Imaging and Sensing. We are seeking accreditation for these courses.

First-class facilities

Semiconductor Materials and Devices
LED, laser photodetectors and transistor design, a high-tech field-emission gun transmission electron microscope (FEGTEM), a focused ion beam (FIB) milling facility, and electron beam lithographic equipment.

Our state-of-the-art semiconductor growth and processing equipment is housed in an extensive clean room complex as part of the EPSRC’s National Centre for III-V Technologies.

Our investment in semiconductor research equipment in the last 12 months totals £6million.

Electrical Machines and Drives

Specialist facilities for the design and manufacture of electromagnetic machines, dynamometer test cells, a high-speed motor test pit, environmental test chambers, electronic packaging and EMC testing facilities, Rolls-Royce University Technology Centre for Advanced Electrical Machines and Drives.

Communications

Advanced anechoic chambers for antenna design and materials characterisation, a lab for calibrated RF dosimetry of tissue to assess pathogenic effects of electromagnetic radiation from mobile phones, extensive CAD electromagnetic analysis tools.

Core modules

Advanced Signal Processing; Advanced Communication Principles; Antennas, Propagation and Satellite Systems; Mobile Networks and Physical Layer Protocols; Broadband Wireless Techniques; Wireless Packet Data Networks and Protocols; Major Research Project.

Examples of optional modules

Data Coding Techniques for Communication and Storage; Optical Communication Devices and Systems; Computer Vision; Electronic Communication Technologies; Data Coding Techniques for Communication and Storage.

Teaching and assessment

Research-led teaching and an individual research project. Assessment is by examinations, coursework and a project dissertation with poster presentation.

Read less
Electronic and Electrical Engineering is a broad and rapidly-expanding set of disciplines. Read more

About the course

Electronic and Electrical Engineering is a broad and rapidly-expanding set of disciplines. Building on core teaching in electrical machines, electronic materials, and the way that electronic circuits interact, this course will allow you to choose from a wide range of optional modules from all our active research areas to tailor your learning in a way that meets with your requirements.

Our graduates are in demand

Many go to work in industry as engineers for large national and international companies, including ARUP, Ericsson Communications, HSBC, Rolls-Royce, Jaguar Land Rover and Intel Asia Pacific.

Real-world applications

This is a research environment. What we teach is based on the latest ideas. The work you do on your course is directly connected to real-world applications.

We work with government research laboratories, industrial companies and other prestigious universities. Significant funding from UK research councils, the European Union and industry means you have access to the best facilities.

How we teach

You’ll be taught by academics who are leaders in their field. The 2014 Research Excellence Framework (REF) puts us among the UK top five for this subject. Our courses are centred around finding solutions to problems, in lectures, seminars, exercises and through project work.

Accreditation

All of our MSc courses are accredited by the Institution of Engineering and Technology (IET), except the MSc(Eng) Advanced Electrical Machines, Power Electronics and Drives and MSc(Eng) Bioengineering: Imaging and Sensing. We are seeking accreditation for these courses.

First-class facilities

Semiconductor Materials and Devices

LED, laser photodetectors and transistor design, a high-tech field-emission gun transmission electron microscope (FEGTEM), a focused ion beam (FIB) milling facility, and electron beam lithographic equipment.

Our state-of-the-art semiconductor growth and processing equipment is housed in an extensive clean room complex as part of the EPSRC’s National Centre for III-V Technologies.

Our investment in semiconductor research equipment in the last 12 months totals £6million.

Electrical Machines and Drives

Specialist facilities for the design and manufacture of electromagnetic machines, dynamometer test cells, a high-speed motor test pit, environmental test chambers, electronic packaging and EMC testing facilities, Rolls-Royce University Technology Centre for Advanced Electrical Machines and Drives.

Communications

Advanced anechoic chambers for antenna design and materials characterisation, a lab for calibrated RF dosimetry of tissue to assess pathogenic effects of electromagnetic radiation from mobile phones, extensive CAD electromagnetic analysis tools.

Core modules

Major Research Project.

Examples of optional modules

AC Machines; Advanced Control of Electric Devices; Energy Storage Management; Motion Control and Servo Drives; Permanent Magnet Machines and Actuators; Power Electronic Converters; Power Semiconductor Devices; Advanced Computer Systems; Advanced Integrated Electronics; Advanced Signal Processing; Semiconductor Materials; Principles of Semiconductor Device Technology; Packaging and Reliability of Microsystems; Nanoscale Electronic Devices; Energy Efficient Semiconductor Devices; Optical Communication Devices and Systems; Computer Vision; Electronic Communication Technologies; Data Coding Techniques for Communications and Storage; Principles of Communications; Antennas, Propagation and Satellite Systems; Mobile Networks and Physical Layer Protocols; System Design; Broadband Wireless Techniques; Wireless Packet Data Networks and Protocols.

Teaching and assessment

We deliver research-led teaching with individual support for your research project and dissertation. Assessment is by examinations, coursework and a project dissertation with poster presentation.

Read less
An MSc by Research will provide you with the necessary skills to undertake research, either in an academic or industrial environment. Read more
An MSc by Research will provide you with the necessary skills to undertake research, either in an academic or industrial environment. The expectation is that every graduate from the degree publishes at least one conference paper as part of the research. You will have the opportunity to develop further research and technical skills and to be able to demonstrate a level of independence that is greater than developed on a purely taught programme. The programme is suitable for outstanding students who have an interest in advanced research-based study in one of our research specialisms: Antenna and Electromagnetics; Centre for Digital Music (C4DM); Multimedia and Vision (MMV); Networks.

Programme Structure:
Core Modules- MSc by Research Project

Plus additional 4 modules from those available by the School of Electronic Engineering and Computer Science.

Read less
This course provides you with comprehensive training in the essential elements of information engineering and communications. Module options are topical and relevant, encompassing the design of application-specific integrated circuits, micro-electromechanical systems and optical engineering. Read more
This course provides you with comprehensive training in the essential elements of information engineering and communications. Module options are topical and relevant, encompassing the design of application-specific integrated circuits, micro-electromechanical systems and optical engineering.

You’ll also have the opportunity to tap into the world of Computer Science and explore ‘big data’, covering themes such as digital multimedia storage and communications technologies, data analytics and data mining in terms of algorithms, and goals in real-world problems. You’ll also pick up transferable skills for any future study or career, such as project planning and management, ethics, health and safety, report writing, library skills and career management.

Our recent graduates now occupy positions in industries ranging from core network provision through to logistics and software support, in addition to opportunities in data communication equipment and services.

Course description

The MSc degree (totalling 180 credits) comprises eight taught modules (15 credits each), five core modules and three optional modules (see below), along with a research project worth 60 credits (see below).

Core modules

-Advanced Wireless Systems and Networks
-Information Theory and Coding
-Antenna, Propagation and Wireless Communications Theory
-Optical Communication Systems
-Signal & Image Processing

Optional modules

ASICs, MEMS and Smart Devices
Optical Engineering
Data Mining (from Computer Science)
Foundations of Data Analytics (from Computer Science)
Multimedia Processing, Communications and Storage (from Computer Science)

Individual research project

The individual research project is an in-depth experimental, theoretical or computational investigation of a topic chosen by you in conjunction with your academic supervisor. Typical project titles include:
-Network coding for underwater communications.
-Nanoscale communication networks.
-Forward Error Correction for Spectrally Sliced Transmission.
-Routing Algorithm Design for Mobile Ad Hoc Networks.
-Logical Stochastic Resonance.
-Design of Radio Devices using Metamaterials.
-Nonlinear Effects in Optical Fibre Transmission.

Read less
Our MSc in Communications, Networks and Software covers the key aspects of the changing Internet environment, in particular the convergence of computing and communications underpinned by software-based solutions. Read more

Our MSc in Communications, Networks and Software covers the key aspects of the changing Internet environment, in particular the convergence of computing and communications underpinned by software-based solutions.

Some of our students undertaking their project are able to work on one of our wide range of testbeds, such as internet technologies, wireless networking, network management and control, and internet-of-things (IoT) applications.

We also have specialist software tools for assignments and project work, including OPNET, NS2/3, and various system simulators.

Read about the experience of a previous student on this course, Efthymios Bliatis.

Programme structure

This programme is studied full-time over 12 months or part-time from 24 to 60 months. It consists of eight taught modules and a project.

Example module listing

The following modules are indicative, reflecting the information available at the time of publication. Please note that not all modules described are compulsory and may be subject to teaching availability and/or student demand.

Educational aims of the programme 

The taught postgraduate degree programmes of the Department are intended both to assist with professional career development within the relevant industry and, for a small number of students, to serve as a precursor to academic research.

Our philosophy is to integrate the acquisition of core engineering and scientific knowledge with the development of key practical skills (where relevant).

To fulfil these objectives, the programme aims to:

  • Attract well-qualified entrants, with a background in Electronic Engineering, Physical Sciences, Mathematics, Computing and Communications, from the UK, Europe and overseas
  • Provide participants with advanced knowledge, practical skills and understanding applicable to the MSc degree
  • Develop participants' understanding of the underlying science, engineering, and technology, and enhance their ability to relate this to industrial practice
  • Develop participants' critical and analytical powers so that they can effectively plan and execute individual research/design/development projects
  • Provide a high level of flexibility in programme pattern and exit point
  • Provide students with an extensive choice of taught modules, in subjects for which the Department has an international and UK research reputation

A graduate from this MSc Programme should:

  • Know, understand and be able to apply the fundamental mathematical, scientific and engineering facts and principles that underpin communications, networks and software
  • Be able to analyse problems within the field of communications, networks and software and more broadly in electronic engineering and find solutions
  • Be able to use relevant workshop and laboratory tools and equipment, and have experience of using relevant task-specific software packages to perform engineering tasks
  • Know, understand and be able to use the basic mathematical, scientific and engineering facts and principles associated with the topics within communications, networks and software
  • Be aware of the societal and environmental context of his/her engineering activities
  • Be aware of commercial, industrial and employment-related practices and issues likely to affect his/her engineering activities
  • Be able to carry out research-and-development investigations
  • Be able to design electronic circuits and electronic/software products and systems

Facilities, equipment and support

We have a full range of software support for assignments and project work, including:

  • Matlab/Simulink, C, C++ and up-to-date toolboxes, systemsview, OPNET and NS2/3 (you will be able to access system simulators already built in-house, including 3GPP, BGAN, DVB-S2-RCS, GSM, UMTS, DVB-SH, WCDMA, GPRS, WiMAX, LTE, HSPA and HSDPA)
  • Our Rohde and Schwartz Satellite Networking Laboratory includes DVBS2-RCS generation and measurement equipment and roof-mounted antennas to pick up satellites (a security test-bed also exists for satellite security evaluation)
  • A fully equipped RF lab with network analyser, signal and satellite link simulations
  • A small anechoic chamber for antenna measurements (a wideband MIMO channel sounder is available for propagation measurements)
  • SatNEX is a European Network of Excellence in satellite communications, and a satellite platform exists to link the 22 partners around Europe (this is used for virtual meetings and to participate in lectures and seminars delivered by our partners)
  • A fully equipped UHF/VHF satellite ground-station facility is located on campus, which is being expanded to S-band and is supported by the ESA GENSO project (at present, the station tracks amateur satellites and CubeSats)
  • Our wide coverage experimental wireless network test-bed is based on IPv4, and IPv6 for testing new networking protocols for mobility, handover, security, cognitive radio and networking can be carried out (most networking protocol projects use this test-bed, with the help of PhD students and staff)
  • We are the only university in the UK that has an IP-Multimedia Subsystem (IMS) test-bed for developing and experimenting with advanced mobile/wireless services/applications – you can use this to carry out your services and application-based projects for mobile multimedia, such as multi-mode user interface, service mobility, service discovery and social networking services
  • Our wireless sensor test-bed is unique; advanced routing protocols, middleware architectures, air interface and networking protocols for wireless sensor networks can be developed and tested

Global opportunities

We often give our students the opportunity to acquire international experience during their degrees by taking advantage of our exchange agreements with overseas universities.

In addition to the hugely enjoyable and satisfying experience, time spent abroad adds a distinctive element to your CV.



Read less
The deployment of power electronic converters and electrical machines continues to grow at a rapid rate in sectors such as hybrid and all-electric vehicles, aerospace, renewables and advanced industrial automation. Read more

About the course

The deployment of power electronic converters and electrical machines continues to grow at a rapid rate in sectors such as hybrid and all-electric vehicles, aerospace, renewables and advanced industrial automation. In many of these applications, high performance components are combined into sophisticated motion control and energy management systems. This course will give you a rigorous and in-depth knowledge of the key component technologies and their integration into advanced systems.

Our graduates are in demand

Many go to work in industry as engineers for large national and international companies, including ARUP, Ericsson Communications, HSBC, Rolls-Royce, Jaguar Land Rover and Intel Asia Pacific.

Real-world applications

This is a research environment. What we teach is based on the latest ideas. The work you do on your course is directly connected to real-world applications.

We work with government research laboratories, industrial companies and other prestigious universities. Significant funding from UK research councils, the European Union and industry means you have access to the best facilities.

How we teach

You’ll be taught by academics who are leaders in their field. The 2014 Research Excellence Framework (REF) puts us among the UK top five for this subject. Our courses are centred around finding solutions to problems, in lectures, seminars, exercises and through project work.

Accreditation

All of our MSc courses are accredited by the Institution of Engineering and Technology (IET), except the MSc(Eng) Advanced Electrical Machines, Power Electronics and Drives and MSc(Eng) Bioengineering: Imaging and Sensing. We are seeking accreditation for these courses.

First-class facilities

Semiconductor Materials and Devices

LED, laser photodetectors and transistor design, a high-tech field-emission gun transmission electron microscope (FEGTEM), a focused ion beam (FIB) milling facility, and electron beam lithographic equipment.

Our state-of-the-art semiconductor growth and processing equipment is housed in an extensive clean room complex as part of the EPSRC’s National Centre for III-V Technologies.

Our investment in semiconductor research equipment in the last 12 months totals £6million.

Electrical Machines and Drives

Specialist facilities for the design and manufacture of electromagnetic machines, dynamometer test cells, a high-speed motor test pit, environmental test chambers, electronic packaging and EMC testing facilities, Rolls-Royce University Technology Centre for Advanced Electrical Machines and Drives.

Communications

Advanced anechoic chambers for antenna design and materials characterisation, a lab for calibrated RF dosimetry of tissue to assess pathogenic effects of electromagnetic radiation from mobile phones, extensive CAD electromagnetic analysis tools.

Core modules

Power Electronic Converters; AC Machines; Permanent Magnet Machines and Actuators; Motion Control and Servo Drives; Advanced Control of Electric Drives; Energy Storage and Management; MSc Individual Project; Major Research Project.

Examples of optional modules

Power Semiconductor Devices; Advanced Signal Processing; Packaging and Reliability of Microsystems; Electronic Communication Technologies; Systems Design.

Teaching and assessment

You’ll learn through research-led teaching, lectures, laboratories, seminars, tutorials and coursework exercises. Assessment is by examinations, coursework and a project dissertation with poster presentation.

Read less

Show 10 15 30 per page



Cookie Policy    X