• Regent’s University London Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • Imperial College London Featured Masters Courses
  • University of York Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
University of Birmingham Featured Masters Courses
University of St Andrews Featured Masters Courses
Cardiff University Featured Masters Courses
University of Birmingham Featured Masters Courses
Loughborough University Featured Masters Courses
"air" AND "condition"×
0 miles

Masters Degrees (Air Condition)

  • "air" AND "condition" ×
  • clear all
Showing 1 to 5 of 5
Order by 
The Water Technology programme is a two year programme with a joint degree. The programme is offered jointly by Wageningen University, University Twente and University of Groningen with education being provided at the Technological Top Institute for Water technology (TTIW Wetsus), in Leeuwarden. Read more

MSc Water Technology

The Water Technology programme is a two year programme with a joint degree. The programme is offered jointly by Wageningen University, University Twente and University of Groningen with education being provided at the Technological Top Institute for Water technology (TTIW Wetsus), in Leeuwarden

Programme summary

There are a lot of new and existing global problems related to the availability and quality of water for personal, agricultural and industrial use. And these problems require sustainable solutions with a minimal impact on the environment. Water technology has unfortunately not been a focal point of most academic research and education programmes, despite its enormous importance to society. Instead, the expertise of various research groups is usually concentrated on other processes and in some cases, only later dedicated to water treatment in spin-off projects. New technologies will be necessary to develop new concepts for the treatment of waste water. And also for the production of clean water from alternative sources like salt (sea) water, waste water or humid air in order to minimise the use of precious groundwater. These challenges require academically trained experts who can think out-of-the-box and help to find practical solutions in the near future. A dedicated joint Master Water Technology programme has been created to train and educate these experts.

The MSc Water Technology is situated in Leeuwarden, the capital of water technology, and is offered jointly by three Dutch universities: Wageningen University, the University of Twente and the University of Groningen. A combined technological approach, based on state-of-the-art universities in science and technology, will search for solutions to several developments within business and society; with a worldwide impact on the demand for and use of water. One dedicated Master programme with joint degree allows for flexibility and can be adapted to the changing needs of the labour market. Wageningen University offers a strong focus on environmental sciences, the University of Twente on science and technology, and the University of Groningen on fundamental sciences. Students will be educated in the multidisciplinary laboratory of the technological top institute for water technology called Wetsus.

The MSc Water Technology programme specifically targets students interested in beta science and technology. The programme offers a unique combination of scientific insights and technological applications from the field of Biotechnology and Chemical Engineering. This combined approach for problem solving within the global framework of water problems is an asset to the programme. The programme is a valuable addition for postgraduate students with a completed bachelor degree in Environmental Engineering, Chemical Engineering and Biotechnology; or in related fields with a strong knowledge of mathematics, physics, chemistry and/or biology, and with affinity of water processes. Students are challenged with examples and case studies of real (research) problems that they might encounter as water professionals.

Students apply for the MSc Water Technology programme at Wageningen University, but will be registered at the other two universities as well. They will have access to the facilities of all three universities. Upon the successful completion of the programme, students receive one joint degree MSc Water Technology issued by all participating universities.

Specialisations

There are no official specialisations within the programme Water Technology. Students specialise themselves by doing a thesis within one of the research fields. Some examples are: Priority compounds, Virus Control, Applied water physics, Desalination, Concentrates, Biofouling, Aquatic worms, Advanced waste water treatment, Algae, Separation at source, Resource recovery, Membrane processes and operation for wastewater treatment and reuse and Sensoring.

Your future career

This study domain is becoming more and more relevant due to the urgent need for new technologies to meet global water problems. Water technology for public drinking water production and sewage water treatment is a very large market. Furthermore, the largest use of fresh water is for irrigation purposes. The industrial water supply and industrial waste water treatment also represent a significant market. There is no question that businesses involved in water technology will grow tremendously. Besides this, human capital is a basic condition to guarantee the success and continuity of the development of sustainable technologies. In many EU countries, the lack of talented technological professionals is becoming an increasingly limiting factor. The programme prepares students for a professional position in the broad area of water technology. Graduates have good national and international career prospects in business and research.

Student Stefanie Stubbé.
"Wetsus gave me the opportunity to get personalized education: teachers that take the time for you and fellow students that challenge and collaborate with you at the same time. Water technology is going to be huge in the future; I already experienced that at several companies when I searched for an internship. Although it is sometimes hard work and far away from the "city-life" in the Netherlands; I've never regretted my choice to start this Master!"

Related programmes:
MSc Biotechnology
MSc Environmental Sciences

Read less
WHAT YOU WILL GAIN. - Skills and know-how in the latest technologies in mechanical engineering. - Hard hitting know-how in pumps, compressors, piping, seals and machinery safety. Read more
WHAT YOU WILL GAIN:

- Skills and know-how in the latest technologies in mechanical engineering
- Hard hitting know-how in pumps, compressors, piping, seals and machinery safety
- Guidance from experts in the field of mechanical engineering technology
- Networking contacts in the industry
- Improved career prospects and income
- A world recognized EIT Advanced Diploma in Mechanical Engineering Technology

Next intake is scheduled for October 02, 2017. Applications now open; places are limited.

There are limited places in all of our courses to ensure great interaction can be achieved between the presenters and the students.

Contact us now to receive help from experienced Course Advisors!

INTRODUCTION

Whilst there is probably not a serious shortage of theoretically oriented practitioners in mechanical engineering, there is a shortage of highly skilled practically oriented mechanical technologists and engineers in the world today, due to the new technologies only recently becoming a key component of all modern plants, factories and offices. The critical shortage of experts in the area has been accentuated by retirement, restructuring and rapid growth in new industries and technologies. This is regardless of the recession in many countries.

Many businesses throughout the world comment on the difficulty in finding experienced mechanical engineers and technologists despite paying outstanding salaries. For example, about two years ago a need developed for mechanical technologists and engineers in building process plants. The interface from the traditional SCADA and industrial automation system to the web and to mechanical equipment has also created a new need for expertise in these areas. Specialists in these areas are few and far between.

The aim of this 18 month e-learning program is to provide you with core skills in working with mechanical engineering technology and systems and to take advantage of the growing need by industry here.

The five threads running through this program are:

- Fundamentals of Mechanical Engineering Technologies
- Applications of Mechanical Engineering Technologies
- Energy Systems
- Industrial Automation
- Management

WHO SHOULD ATTEND

- Plant operations and maintenance personnel
- Design engineers
- Process technicians, technologists and engineers
- Process control engineers and supervisors
- Mechanical technicians, technologists and engineers
- Mechanical equipment sales engineers
- Pump and mechanical equipment operators
- Contract and asset managers

COURSE STRUCTURE

The course is composed of 21 modules, which cover 5 main threads, to provide you with maximum practical coverage in the field of Mechanical Engineering Technology:

FUNDAMENTALS OF MECHANICAL ENGINEERING

Fundamentals of Mechanical Engineering
Structural Mechanics
Mechanical Drive Systems
A C Electrical Motors and Drives
Rotating Equipment Balancing, Alignment and Condition Monitoring
Hydraulics
Pneumatics
Lubrication Engineering

APPLICATIONS OF MECHANICAL ENGINEERING TECHNOLOGY

Heating, Ventilation and Air-conditioning
Process Plant Layout and Piping Design
Pipeline Systems
Pumps and Compressors
Mechanical Seals
Safe Lifting
Machinery Safety

ENERGY SYSTEMS

Energy Efficiency
Renewable Energy Systems

INDUSTRIAL AUTOMATION

Industrial Automation
Measurement and Control Systems
Management of Hazardous Areas

MANAGEMENT

Project Management

COURSE FEES

What are the fees for my country?

The Engineering Institute of Technology (EIT) provides distance education to students located almost anywhere in the world – it is one of the very few truly global training institutes. Course fees are paid in a currency that is determined by the student’s location. A full list of fees in a currency appropriate for every country would be complex to navigate and, with today’s exchange rate fluctuations, difficult to maintain. Instead we aim to give you a rapid response regarding fees that is customised to your individual circumstances.

We understand that cost is a major consideration before a student commences study. For a rapid reply to your enquiry regarding courses fees and payment options, please enquire via the below button and we will respond within 2 business days.

Read less
This course is aimed at those who wish to study advanced topics in mechanical engineering with a focus on materials. It's been developed to provide you with an in-depth technical understanding of advanced mechanical engineering topics. Read more

Why this course?

This course is aimed at those who wish to study advanced topics in mechanical engineering with a focus on materials.

It's been developed to provide you with an in-depth technical understanding of advanced mechanical engineering topics. You’ll also develop generic skills that allow you to contribute effectively in developing company capabilities.

The course is designed to make you more employable and also satisfies the Further Learning requirements necessary to obtain Chartered Engineer status.

This course is particularly suitable for graduate engineers in these sectors:
- chemical, petrochemical & process engineering
- design engineering
- power generation
- manufacturing
- oil & gas
- renewable energy

See the website https://www.strath.ac.uk/courses/postgraduatetaught/advancedmechanicalengineeringwithmaterials/

You’ll study

You’ll have the opportunity to select technical and specialist classes.

- Compulsory classes
You’ll study three compulsory classes:
- Engineering Composites
- Polymer & Polymer Composites
- Industrial Metallurgy

- Other specialist instructional modules
These focus on different technical aspects allowing you to tailor learning to your individual needs. When choosing technical modules, you’ll discuss the options with the course co-ordinator. These include:
- Pressurised Systems
- Aerodynamic Performance
- Aerodynamic Propulsion Systems
- Systems Engineering 1 & 2
- Machine Dynamics
- Machinery Diagnosis & Condition Monitoring
- Mathematical Modelling in Engineering Science
- Spaceflight Mechanics
- Advanced Topics in Fluid Systems Engineering
- Spaceflight Systems
- Advanced Boiler Technologies 1 & 2
- Materials for Power Plant
- Gas & Steam Turbines

- Faculty-wide generic instructional modules
You’ll choose three faculty-wide generic modules which satisfy the broader learning requirements for Chartered Engineer status. You'll choose from:
- Design Management
- Project Management
- Sustainability
- Information Management
- Finance
- Risk Management
-Environmental Impact Assessment
- Knowledge Engineering & Management for Engineers

- Individual project
MSc students take on an individual project which allows study of a selected topic in-depth. This may be an industry-themed project or one aligned to engineering research at Strathclyde.

Facilities

Our facilities include many laboratories and research centres including:
- Advanced Space Concepts Laboratory
- Energy Systems Research Unit
- Future Air-Space Transportation Technology
- James Weir Fluids Laboratory
- Mechanics & Materials Research Centre

We have local access to a 3500-node region supercomputer.

Accreditation

As this is a new course starting in 2014/15, accreditation by IMechE is expected (as has been obtained for the Advanced Mechanical Engineering course), after it has been operational for one year.

English language requirements for international students

IELTS - minimum overall band score of 6.5 (no individual test score below 5.5) or TOEFL iBT minimum total score of 95 (minimum scores of Listening-17, Writing-19, Reading and Speaking-20). Both tests are valid for two years.

Learning & teaching

Teaching methods include lectures and practical exercises. Site visits are also arranged.

Careers

Engineering graduates, particularly Mechanical Engineers, are in demand from recruiting companies. This course is designed to meet industrial demand for qualified staff in the area of Mechanical Engineering. This course is particularly suitable for Graduate Engineers in the following sectors:
- Chemical, Petrochemical & Process Engineering
- Design Engineering
- Power Generation
- Manufacturing
- Oil & Gas
- Renewable Energy

Find information on Scholarships here http://www.strath.ac.uk/search/scholarships/

Read less
Engineers are the key to the development of society and solving the problems the world currently faces. They have the power to make the world fundamentally different. Read more
Engineers are the key to the development of society and solving the problems the world currently faces. They have the power to make the world fundamentally different.

The Master of Advanced Engineering is the key transitional stage in your career, transforming you into a global leader. Gain a depth of knowledge, mastering the crucial skills to become a leading contributor in your field.

Customise your degree - the Master of Advanced Engineering offers flexibility to complete your Master degree in just one year, or you can choose a two year option.

This course is designed to extend your knowledge in your chosen specialisation area and advance your leadership and complex problem-solving skills in a cross cultural environment.

Understand, reflect critically upon and apply methods in at least one specialist engineering area to design solutions to complex, multifaceted engineering problems.

Common core units will develop crucial skills in areas such as data analysis and entrepreneurship, translating theory into engineering practice. In discipline core units you will identify, interpret and critically appraise current developments and technologies within your specialisation.

Enhancement units are designed to provide breadth and are taken from either another engineering specialisation or in complementary areas such as information technology and business.

In addition, the two year version of the program offers a range of technical electives that will deepen your understanding of a specific topic, and two, year- long engineering project units. You will work closely with an academic on a topic of your choice and immerse yourself in a multidisciplinary design project.

The Master of Advanced Engineering could also be your stepping stone to a research degree. All of this in highly interactive, expert led classes.

Visit the website http://www.study.monash/courses/find-a-course/2016/advanced-engineering-e6001?domestic=true

Overview

Please select a specialisation for more details:

Chemical engineering

Your qualification will be a Master of Advanced Chemical Engineering

Please note that this specialisation is available only in Clayton.

The Master of Advanced Chemical Engineering allows you to engage in the areas of study including advanced reaction engineering, process design and optimization, conversion of bioresources into fuel, materials and specialty chemicals, and nanostructured membranes for sustainable separations and energy production with an emphasis on the latest developments in the field. In this course, you will develop specialised knowledge and skills that are important to Chemical Engineers in industry and research. This course provides graduates with enhanced opportunities for advancement in their careers.

Civil engineering (Infrastructure systems)

Your qualification will be a Master of Advanced Civil Engineering (Infrastructure Systems)

The Master of Advanced Civil Engineering (Infrastructure Systems) will equip graduates to work with in the area of infrastructure engineering and management. It will provide the fundamental knowledge associated with interfacing both structural and geotechnical designs for infrastructure systems. The program is designed to equip you with advanced skills necessary for managing the challenges posed by ageing and leading designs of new complex infrastructure systems. The course is suitable for new graduates, professionals and managers who are keen to upgrade their existing design and management skills, as well as to develop theoretical and applied knowledge in the area of infrastructure engineering and management.

Civil engineering (Transport)

Your qualification will be a Master of Advanced Civil Engineering (Transport)

Please note that this specialisation is available only in Clayton.

The Master of Advanced Civil Engineering (Transport) program deals with the fundamental knowledge associated with transport engineering and management, traffic engineering, intelligent transport systems and transport planning. The program in is a response to the growing need for engineers with broad awareness of the characteristics and significance of transport, including its technological, economic and social impact. At the same time, the program outlines the state-of-the-art of transport engineering, as it may be applied to the solution of real problems in the planning, design, management and operation of transport facilities. The course is suitable for new graduates, professionals and managers who are keen to upgrade their existing design and management skills as well as to develop theoretical and applied knowledge in the area of transport engineering and management.

Civil engineering (Water)

Your qualification will be a Master of Advanced Civil Engineering (Water)

Please note that this specialisation is available only in Clayton.

The Master of Advanced Civil Engineering (Water) allows you to major in water resources engineering and management. This program deals with the fundamental knowledge associated with surface and ground water flow, stormwater management, water quality, flood forecasting and mitigation. The program is designed to equip you with advanced skills necessary for managing the challenges posed by changing climatic condition on water resource management. The course is suitable for new graduates, professionals and managers who are keen to upgrade their existing design and management skills as well as to develop theoretical and applied knowledge in the area of water resources engineering and management.

Electrical engineering

Your qualification will be a Master of Advanced Electrical Engineering

Please note that this specialisation is available only in Clayton.

The Master of Advanced Electrical Engineering will give you a broad introduction to advanced techniques in signal processing, communications, digital systems and electronics. The units have been chosen around the common theme of embedded systems: special purpose computing systems designed for specific applications. They are found just about everywhere including in consumer electronics, transportation systems, medical equipment and sensor networks. The course will mix theory and practice and will contain a significant amount of hands-on learning in laboratories and team-based design projects.

Energy and sustainability engineering

Your qualification will be a Master of Advanced Engineering (Energy and Sustainability)

Please note that this specialisation is available only in Malaysia.

The Master of Advanced Engineering (Energy and Sustainability) is designed for qualified engineers keen to deepen their knowledge in the energy and sustainability area. The course provides foundations in general engineering through engineering analysis and entrepreneurship units. Students can major in this program by examining energy and sustainability area from a multi-disciplinary perspective. Students can also choose elective units such as environment and air pollution control and smart grids to further enhance their knowledge in this area or undertake a minor research work to pursue a topic of interest related to this area.

Materials engineering

Your qualification will be a Master of Advanced Materials Engineering

Please note that this specialisation is available only in Clayton.

The Master of Advanced Materials Engineering encompasses practical aspects of the key classes of materials such as metals, polymers, biomaterials, nanomaterials and energy-related materials. This program particularly focuses on the most up-to-date aspects of the field, along with the utilisation of materials and their electronic, chemical and mechanical properties as underpinned by the microstructures that are revealed by modern characterisation techniques. This program is designed to prepare students to appreciate and exploit the central role of materials in addressing the present technical, economic and environmental problems involved in the design and construction of engineering structures, processes and devices. This course is ideally suited for new graduates as well as professional engineers who are eager to advance their applied knowledge in the area of Materials Engineering.

Mechanical engineering

Your qualification will be a Master of Advanced Mechanical Engineering

Please note that this specialisation is available only in Clayton.

Most modern engineering projects are multidisciplinary in nature and require a broad range of skills, proficiencies and perspectives to accomplish the task. The Master of Advanced Mechanical Engineering takes a systems approach to the design, monitoring and performance of complex mechanical engineering systems in the fields of renewable energy, aerospace, buildings, transportation, and biomedical devices. The systems approach also permeates the design of the course: four discipline-based core units are vertically integrated so that common problems are examined from different perspectives, culminating in a sustainable systems unit.

For more information visit the faculty website - http://www.study.monash/media/links/faculty-websites/engineering

Find out how to apply here - http://www.study.monash/courses/find-a-course/2016/advanced-engineering-e6001?domestic=true#making-the-application

Read less
Goods are produced for consumers. But how do those goods become finished products and get to where they need to go? Supply chain management masterminds the flow of goods. Read more
Goods are produced for consumers. But how do those goods become finished products and get to where they need to go? Supply chain management masterminds the flow of goods. Raw materials must be stored and catalogued, transformed into usable inventory, and, once finished and given the stamp of approval, must be moved from the point of origin to the point of consumption. The movement of goods is a skillfully designed labyrinth of interlinking networks, channels, and connecting points, with the customer situated at the end of that supply chain. The goal is to satisfy customer demand and optimize the number of organizations in satisfying that demand, while reducing managerial control of daily logistics operations. Less control and more supply-chain partners led to the original concept of supply chain management. The consumer expects dependable and efficient service and assumes the product will arrive in good time and in perfect condition. The manager of the supply chain must ensure that the journey from product inception to customer reception runs without a hitch.

The Master of Science (M.S.) in Management is offered by the Department of Management in the Jennings A. Jones College of Business. This program, with three concentrations, offers students planning, communication, and ethical decision-making skills through experiential learning in which they will find themselves in the trenches of the real-world work environment. Each concentration—Supply Chain Management, Social Innovation and Not-for-Profit Management, and Organizational Leadership—includes a capstone project in which students will partner with an organization in the industry or non-profit sector.

Career

It was once noted that supply chain management deals with a product from cradle to the grave. Supply chain management borrowed from the process known as logistics, which emerged as a procedure in World War II as part of an effort to deliver the right amount of supplies to the troops in the trenches. The supply chain concept, however, focused on the inception of the product, as far back as the design stage, and followed that product all the way through marketing and customer service. The largest Fortune 500 Company, Wal-Mart, owes much of its success to making supply chain management a science. Examples of career opportunities include areas such as:

Corporate upper-level management
Customer relations
Distribution
Government
Healthcare
Logistics
Manufacturing
Procurement
Sourcing
Transportation/trucking/railroad/air/ocean freight/private carrier
Warehousing/inventory

Because this program is relatively new, employer information is still being compiled. Following are examples of employers of Management graduates and Career Fair participants:

American Cellular
Automatic Data Processing
CalsonicKansei North America
Chick-Fil-A Murfreesboro
Consolidated Electrical Distributors, Inc.
Enterprise
Ettain Group
Insight Global, Inc.
Internal Data Resources
Liberty Mutual
Modern Woodmen of America
Nissan North America
Northwestern Mutual Financial Network
PepsiCo Foodservice
Sherwin-Williams
State Farm Insurance
Target Stores
Tennessee Valley Healthcare System (VA)
The Hershey Company
Walter Meier Manufacturing

Read less

  • 1
Show 10 15 30 per page


Share this page:

Cookie Policy    X