• University of York Featured Masters Courses
  • Regent’s University London Featured Masters Courses
  • Leeds Beckett University Featured Masters Courses
  • University of Edinburgh Featured Masters Courses
  • Xi’an Jiaotong-Liverpool University Featured Masters Courses
  • Swansea University Featured Masters Courses
  • Imperial College London Featured Masters Courses
King’s College London Featured Masters Courses
University of Sussex Featured Masters Courses
University of Leeds Featured Masters Courses
Coventry University Featured Masters Courses
University College London Featured Masters Courses
"accredited"×
0 miles

Masters Degrees (Accredited)

  • "accredited" ×
  • clear all
Showing 1 to 15 of 3,502
Order by 
3 Reasons to Apply for your SSM MBA Today. 1. Our MBA Degree is accredited in the USA and the EU. 2. Finish your MBA in 18 months!. Read more

Executive MBA - International Accredited MBA Program in Rome, Italy

3 Reasons to Apply for your SSM MBA Today:

1. Our MBA Degree is accredited in the USA and the EU.

2. Finish your MBA in 18 months!

3. Study in the beautiful historic center of Rome, Italy!


Accreditations:
•INSEEC is a University accredited under the laws of the Ministry of Public Education in France and the EU.
•SSM is a UNESCO/International Association of Universities approved school
•SSM is accredited through the IACBE
•SSM is a quality certified institution of higher education, certified by EduQua
•SSM is an accredited institution by the U.S. Department of Veterans Affairs


The Executive MBA Program at the Swiss School of Management is designed specifically for high-achieving business people that are looking to enhance their education. The program’s innovative curriculum and collaborative learning environment helps you apply your knowledge and skills to problems you face in today’s marketplace. An outstanding faculty exposes you to cutting-edge ideas and practices.

The program is based on a common core curriculum of 12 general management courses, 3 specialization courses and a thesis project or business plan. It is designed to equip students with the capabilities required for a successful career management level and beyond.

Common Core Curriculum
•Leadership and Organizational Behavior
•Human Resource Management
•International Negotiations Skills
•Strategic Financial Management
•See a full list of core classes on our website!

Students will graduate with a Master of Business Administration Degree. You can select one of the following specializations:

Global Management & Leadership, Finance, Marketing, Human Resource Management, Entrepreneurship, Luxury Management or Business Intelligence.

Entry Requirements:

You need a Bachelor Degree in order to apply for our MBA Program. If you don't hold a Bachelor Degree, we can also help you getting one through our fast-track Bachelor Study Program.

Program Intakes

The program has a duration of 12 - 18 months and has

intakes at the beginning of each month.

Entry Criteria & Application Procedure

Find a complete detailed list of entry criteria and application procedures on our Requirements page http://www.ssmrome.com/mba/index.php?page=Requirements


To apply, download an electronic application from our website http://www.ssmrome.com/index.php?page=Applynow and send to !

Read less
This course is highly relevant to the workplace and it is accredited by the Chartered Institute of Personnel and Development (CIPD). Read more
This course is highly relevant to the workplace and it is accredited by the Chartered Institute of Personnel and Development (CIPD).

Course overview

Are you looking to make a difference to the way that organisations improve motivation, foster career development and treat people well? This course provides specialist postgraduate training in Human Resource Management (HRM).

This Human Resource Management degree is accredited by the Chartered Institute of Personnel and Development (CIPD) and the Society for Human Resource Management (SHRM). These accreditations show that our postgraduate HRM courses fully align with the latest academic and professional advancements, both within the UK and internationally.

Successful completion* of the course fulfils part of the requirements for professional membership of the CIPD. Membership of a professional body such as this, will further boost individual employability and help students progress towards senior managerial roles.
The course explores the Human Resource Management in areas such as leadership, employment relations, recruitment, selection, training, development and managing. The teaching is informed by current academic debates and the latest research. Core modules include ‘Managing, Leading and Developing People’, ‘Investigating a Business Issue from an HR Perspective’, ‘Developing Skills for Business and Leadership’ and ‘Learning and Talent Development’. The Human Resource Reflective Project will focus on a strategic HRM issue within an organisation which students identify themselves with the support of an academic tutor.

The University will ensure that the student’s learning is rooted in a real-world context by inviting guest speakers to share their practical HRM business experience together with arranging an external organisational visit.

Sunderland Business School is ranked Best in the Noth East for Course Satisfaction, according to The Guardian University Guide 2015. Our teaching is informed by the latest research and up-to-date approaches and in the recent Research Excellence Framework (REF) research in the business area was rated 'world-leading'.

* Please note that students must achieve a 50% pass mark in all CIPD related areas to gain Associate Membership of the CIPD.

Course content

The course mixes taught elements with self-directed research. You can negotiate the topic of the project to fit both your personal interests and the supervisory expertise of Sunderland's tutors. Modules on this course include:
-Developing Skills for Business and Leadership (15 Credits)
-Human Resource Management in Context (15 Credits)
-Managing, Leading and Developing People (15 Credits)
-Learning and Talent Development (15 Credits)
-Leadership and Management Development (15 Credits)
-Resourcing and Talent Management (15 Credits)
-Investigating a Business Issues from a Human Resource Management Perspective (30 Credits)
-Human Resource Reflective Project (30 Credits)

Plus choose one module from the following list of three modules:
-Employee Relations (15 Credits)
-Employment Law (15 Credits)
-Organisational Development and Change (15 Credits)

Plus choose one further module from the following list of five modules:
-International HRM (15 Credits)
-Managing Diversity (15 Credits)
-Employee Relations (15 Credits)
-Employment Law (15 Credits)
-Organisational Development and Change (15 Credits)

Teaching and assessment

The University uses a wide variety of teaching and learning methods which include lectures, case studies and workshops all of which are supported by the University’s virtual learning environment, Sunspace.

Compared to an undergraduate course, you will find that this Masters course requires a higher level of independent reading and research.

Assessment methods include individual and group assignments, business reports, presentations, case study analysis, portfolios of work and time-constrained activities as well as the Masters Reflective Project.

Facilities & location

This course is based on the banks of the River Wear at The Sir Tom Cowie Campus at St Peter’s. Recently the University developed a Student Learning Space that is specifically designed to facilitate collaboration and team-based projects. It includes a board room as well as bookable areas to hold meetings and to meet with staff and visitors from outside the University.

University Library Services
The St Peter’s Library contains over 31,000 books related to business, economics, management, human resources, marketing, strategy and tourism.

Added to this, students benefit from a wide range of journals and periodicals in the St Peter’s library, many of them in online format. To help you make the most of the wealth of resources there’s a full-time librarian who is dedicated to the Business and Tourism sections.

Further resources are available at the main Murray Library, which has a total of over 430,000 books with many more available through the inter-library loan service. The University spends around £1 million every year on new books and resources.

IT provision
When it comes to IT provision students can choose from over a hundred PCs in the St Peter’s Library, three computer laboratories, and wireless access zones. If you have any problems, just ask the friendly helpdesk team.

Learning environment
The University of Sunderland is a vibrant learning environment with an international dimension thanks to the presence of students from around the world. At the same time, the University is fully plugged into the world of business as a result of strong links with industry organisations.

Employment & careers

This Masters course equips students with advanced skills and knowledge that will help you progress rapidly to more senior roles in Human Resource Management. It is accredited by the CIPD and SHRM, which means that students have access to additional HR research, conferences, training and development.

The average salary of a HR officer is £25,000 and HR directors typically earn between £75,000 and £100,000 (source: Hudson 2013 Salary & Employment Insights). CIPD-accredited qualifications can significantly enhance your career opportunities.

Previous Sunderland graduates are now working at senior and strategic levels in HRM in a wide range of industries including Caterpillar, BT and Nissan.

Your Masters degree will also enhance opportunities for academic roles or further study towards a PhD.

Read less
3 Reasons to Apply for your SSM MBA Today. 1. Earn an international accredited MBA Degree!. 2. Finish your MBA in 1 year!. 3. Study in the beautiful historic center of Rome, Italy!. Read more

Master of Business Administration in Rome, Italy

3 Reasons to Apply for your SSM MBA Today:

1. Earn an international accredited MBA Degree!

2. Finish your MBA in 1 year!

3. Study in the beautiful historic center of Rome, Italy!



Accreditations:
•INSEEC is a University accredited under the laws of the Ministry of Public Education in France and the EU.
•SSM is a UNESCO/International Association of Universities approved school
•SSM is accredited through the IACBE

•SSM is a quality certified institution of higher education, certified by EduQua

•SSM is an accredited institution by the U.S. Department of Veterans Affairs


The SSM MBA is based on a core curriculum of 12 general management courses, 3 specialization courses and a thesis project or business plan. It is designed to equip students with the capabilities required for a successful career management level and beyond.

Core Curriculum
•Leadership and Organizational Behavior
•Human Resource Management
•International Negotiations Skills
•Strategic Financial Management
•See a full list of core classes on our website! http://www.ssmrome.com/mba/index.php?page=Coreclassesandconcentrations


Students will graduate with a Master of Business Administration Degree. You can select one of the following specializations:

Global Management & Leadership, Finance, Marketing, Human Resource Management, Luxury Management, Business Intelligence or Entrepreneurship.

Entry Requirements:

You need a Bachelor Degree in order to apply for our MBA Program. If you don't hold a Bachelor Degree, we can also help you getting one through our fast-track Bachelor Study Program.

Program Intakes

The program lasts 1 year and has four intakes: October, January, April and June.

Entry Criteria & Application Procedure

Find a complete detailed list of entry criteria and application procedures on our Requirements page http://www.ssmrome.com/mba/index.php?page=Requirements


To apply, download an electronic application from our website http://www.ssmrome.com/index.php?page=Applynow and send to !

Read less
4 Reasons to Apply for your SSM MBA Today. 1. Earn an international accredited dual MBA Degree. 2. Finish your Dual MBA in 12 months!. Read more

Dual MBA - Paris and Rome

4 Reasons to Apply for your SSM MBA Today:

1. Earn an international accredited dual MBA Degree

2. Finish your Dual MBA in 12 months!

3. Study in two main Capital of Europe- Paris and Rome!

4. Get the opportunity to apply for a paid Internship

Accreditations:
•INSEEC is a University accredited under the laws of the Ministry of Public Education in France and the EU.
•SSM is a UNESCO/International Association of Universities approved school
•SSM is accredited through the IACBE
•SSM is a quality certified institution of higher education, certified by EduQua
•SSM is an accredited institution by the U.S. Department of Veterans Affairs


Dual Master of Business Administration

In keeping with our commitment to innovation and academic adventure, the Swiss School of Management offers a joint dual MBA program with partner, INSEEC in Paris.

Visit our website http://www.ssmrome.com/mba/index.php?page=DualMBA for more info on the Dual MBA with INSEEC!


Core Curriculum
•Leadership and Organizational Behavior
•Human Resource Management
•International Negotiations Skills
•Strategic Financial Management
•See a full list of core classes on our website! http://www.ssmrome.com/mba/index.php?page=Coreclassesandconcentrations

Students will graduate with a Master of Business Administration Degree. You can select one of the following specializations:

Global Management & Leadership, Finance, Marketing, Human Resource Management, Luxury Management, Business Intelligence or Entrepreneurship.

Entry Requirements:

You need a Bachelor Degree in order to apply for our MBA Program. If you don't hold a Bachelor Degree, we can also help you getting one through our fast-track Bachelor Study Program.

Program Intakes

The program lasts 12 months and has four intakes: October, January, April and June.

Entry Criteria & Application Procedure

Find a complete detailed list of entry criteria and application procedures on our Requirements page http://www.ssmrome.com/mba/index.php?page=Requirements


To apply, download an electronic application from our website http://www.ssmrome.com/index.php?page=Applynow and send to !

Read less
The MSc in Urban Planning. Developing and Transitional Regions is concerned with the theory and practice of urban planning in societies undergoing rapid economic, social, technological, environmental and spatial change. Read more
The MSc in Urban Planning: Developing and Transitional Regions is concerned with the theory and practice of urban planning in societies undergoing rapid economic, social, technological, environmental and spatial change.

The emphasis of the course is on institutional aspects of planning and management interventions in the urban sector and the scope of various policy instruments and planning modes to manage the emerging spatial patterns, impacts and processes of urban growth.

The MSc is RICS- and RTPI-accredited.

See the website http://www.brookes.ac.uk/studying-at-brookes/courses/postgraduate/2015/urban-planning-developing-and-transitional-regions/

Why choose this course?

In choosing to study the MSc Urban Planning: Developing and Transitional Regions at Oxford Brookes, you will:
- Be on a fully accredited RTPI and RICS course which is viewed as the first choice for urban and development planning training by a range of employers throughout the world - especially governments, local authorities, development and planning consultancies.

- Join and engage with scholars and tutors from diverse intellectual and global backgrounds.

- As well as being one of the world's most famous centres for learning, Oxford is a city with a great urban heritage and is within easy reach of London and other urban centres. Its excellent transport links make it a convenient place to take up a day release part- time course.

- Engage with and benefit from teaching staff who are active in research and practice; drawn primarily from the Department of Planning but with some contributions from the wider university community. Visiting speakers from business and industry, local government, and consultancies and research bodies also provide a major contribution to the teaching programme.

- Benefit from the success of our courses in delivering highly skilled professionals. Our graduates get employment in the private and public sector, international development institutions, NGOs, research institutions and consultancy.

- Study in our brand new £132 million redevelopment of Headington campus, ultra modern spaces and facilities in Abercrombie building and John Henry Brookes building; access to top of the range studios, IT suites and computer programs, library and 24/7 online databases.

Professional accreditation

The MSc Urban Planning: Developing and Transitional Regions is fully accredited by:
- the Royal Town Planning Institute (RTPI).
- the Royal Institution of Chartered Surveyors (RICS). This means that on successful completion of the MSc, graduates can register for - the Assessment of Professional Competence procedures of RICS and RTPI and work towards becoming full members.

Teaching and learning

Learning methods include lectures, directed reading, workshops, seminars, and practical and project work. Some modules include site visits and fieldwork, which provide you with direct experience of practical and current issues.

Teaching is organised on a module-credit basis, each module involving approximately 200 hours of student input and approximately 36 hours of staff contact, normally delivered through three-hour teaching blocks over a 12-week period.

Each course module is assessed individually, generally on the quality of written or design work, and to some extent on verbal presentations. Assessment methods may include essays, seminar papers, formal written examinations, in-class tests, project work, design and verbal presentations, workshops, simulations and practical exercises.

Field trips

Field trips include an international field trip to Europe in the Autumn plus a range of national and local site and institutional visits especially to London throughout the academic year.

Careers

Not only is the MSc Urban Planning: Developing and Transitional Regions a RICS and RTPI professionally recognised qualification, it is also widely regarded as providing the transferable skills, critical knowledge and understanding necessary in many fields of work in the built and natural environment. Today our alumni can be found in senior positions in some of the largest international planning and environmental consultancies, in government agencies, in large NGOs and campaigning organisations across the globe.

The long-standing reputation of the Department of Planning in producing highly skilled, enthusiastic and very capable professional planners aids the employability of our graduates. We are the first port of call for many employers when they are seeking new graduate planners.

Free language courses for students - the Open Module

Free language courses are available to full-time undergraduate and postgraduate students on many of our courses, and can be taken as a credit on some courses.

Please note that the free language courses are not available if you are:
- studying at a Brookes partner college
- studying on any of our teacher education courses or postgraduate education courses.

Research highlights

With more than 600 students engaging a wide range of research topics in our undergraduate, postgraduate and research degree programmes, including master's by research, the department is widely recognised as a leading educator in environment, design and development subjects. With a complement of over 60 teaching, administrative, technical and research staff, the department performs a leading role in research and consultancy, with clients and projects covering subjects from local concerns to multinational organisations, government and industry.

Read less
*Accredited by the British Psychological Society. *Aimed at. Psychology graduates wishing to specialise in Sport and Exercise Psychology. Read more

Overview

*Accredited by the British Psychological Society
*Aimed at: Psychology graduates wishing to specialise in Sport and Exercise Psychology
*Successful completion confers Stage 1 of training to become a Chartered (and HCPC-accredited) Sport and Exercise Psychologist
*Engaging course team with a wealth of teaching, practitioner and research experience

Modules

Research Methods and Data Analysis (45 credits)
Research and Application in the Psychology of Sports Performance (15 credits)
Social Processes in Sport and Exercise (15 credits)
Psychological Skills for Practitioners (15 credits)
Individual Differences in Sport and Exercise (15 credits)
Dissertation (60 credits)

Performance Lifestyle (15 credits) OR
Professional Development (15 credits)

Highlights

*Outstanding Postgraduate Taught Experience Survey (NSS equivalent) ratings
*Commended for the range of facilities underpinning the programme
*Commended for the knowledge base, research expertise and applied experience of the programme team
*Commended for the range of pedagogies and approaches to learning and teaching
*Commended for the approachability and supportive nature of the programme team
*2014: 100% of student respondents would recommend the course to another prospective student
(Formal commendations from BPS re-accreditation report, 2013)

Read less
Take advantage of one of our 100 Master’s Scholarships to study Computer Modelling in Engineering at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Read more
Take advantage of one of our 100 Master’s Scholarships to study Computer Modelling in Engineering at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Postgraduate loans are also available to English and Welsh domiciled students. For more information on fees and funding please visit our website.

This MRes in Computer Modelling in Engineering programme consists of two streams: students may choose to specialise in either structures or fluids. The taught modules provide a good grounding in computer modelling and in the finite element method, in particular.

Key Features of MRes in Computer Modelling in Engineering

Computer simulation is now an established discipline that has an important role to play in engineering, science and in newly emerging areas of interdisciplinary research.

Using mathematical modelling as the basis, computational methods provide procedures which, with the aid of the computer, allow complex problems to be solved. The techniques play an ever-increasing role in industry and there is further emphasis to apply the methodology to other important areas such as medicine and the life sciences.

The Zienkiewicz Centre for Computational Engineering, within which this course is run, has excellent computing facilities, including a state-of-the-art multi-processor super computer with virtual reality facilities and high-speed networking.

This Computer Modelling in Engineering course is suitable for those who are interested in gaining a solid understanding of computer modelling, specialising in either structures or fluids, and taking the skills gained through this course to develop their career in industry or research.

If you would like to qualify as a Chartered Engineer, this course is accredited with providing the additional educational components for the further learning needed to qualify as a Chartered Engineer, as set out by UK and European engineering professional institutions.

Modules

Modules on the Computer Modelling in Engineering programme typically include:

• Finite Element and Computational Analysis
• Numerical Methods for Partial Differential Equations
• Solid Mechanics
• Advanced Fluid Mechanics
• Dynamics and Transient Analysis
• Communication Skills for Research Engineers
• MRes Research Project

Accreditation

The MRes Computer Modelling in Engineering course is accredited by the Joint Board of Moderators (JBM).

The Joint Board of Moderators (JBM) is composed of the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Chartered Institution of Highways and Transportation (CIHT), and the Institute of Highway Engineers (IHE).

The MRes Computer Modelling in Engineering degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

The MRes Computer Modelling in Engineering degree has been accredited by the JBM under licence from the UK regulator, the Engineering Council.

Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

Links with Industry

The Civil and Computational Engineering Centre has an extensive track record of industrial collaboration and contributes to many exciting projects, including the aerodynamics for the current World Land Speed Record car, Thrust SSC, and the future BLOODHOUND SSC, and the design of the double-decker super-jet Airbus A380.

Examples of recent collaborators and sponsoring agencies include: ABB, Audi, BAE Systems, British Gas, Cinpress, DERA, Dti, EADS, EPSRC, European Union, HEFCW, HSE, Hyder, Mobil, NASA, Quinshield, Rolls-Royce, South West Water, Sumitomo Shell, Unilever, US Army, WDA.

Student Quotes

“I was attracted to the MRes course at Swansea as the subject matter was just what I was looking for.

I previously worked as a Cardiovascular Research Assistant at the Murdoch Children’s Research Institute in Melbourne. My employer, the Head of the Cardiology Department, encouraged me to develop skills in modelling as this has a lot of potential to help answer some current questions and controversies in the field. I was looking for a Master’s level course that could provide me with computational modelling skills that I could apply to blood flow problems, particularly those arising from congenital heart disease.

The College of Engineering at Swansea is certainly a good choice. In the computational modelling area, it is one of the leading centres in the world (they wrote the textbook, literally). A lot of people I knew in Swansea initially came to study for a couple of years, but then ended up never leaving. I can see how that could happen.”

Jonathan Mynard, MRes Computer Modelling in Engineering, then PhD at the University of Melbourne, currently post-doctoral fellow at the Biomedical Simulation Laboratory, University of Toronto, Canada

Careers

Employment in a wide range of industries, which require the skills developed during the Computer Modelling in Engineering course, from aerospace to the medical sector. Computational modelling techniques have developed in importance to provide solutions to complex problems and as a graduate of this course, you will be able to utilise your highly sought-after skills in industry or research.

Research

The Research Excellence Framework (REF) 2014 ranks Engineering at Swansea as 10th in the UK for the combined score in research quality across the Engineering disciplines.

World-leading research

The REF shows that 94% of research produced by our academic staff is of World-Leading (4*) or Internationally Excellent (3*) quality. This has increased from 73% in the 2008 RAE.

Research pioneered at the College of Engineering harnesses the expertise of academic staff within the department. This ground-breaking multidisciplinary research informs our world-class teaching with several of our staff leaders in their fields.

Highlights of the Engineering results according to the General Engineering Unit of Assessment:

Research Environment at Swansea ranked 2nd in the UK
Research Impact ranked 10th in the UK
Research Power (3*/4* Equivalent staff) ranked 10th in the UK

Read less
The psychology of human performance in sport and exercise environments is fundamental to helping individuals to realise their physical, technical and health performance potential. Read more

Why take this course?

The psychology of human performance in sport and exercise environments is fundamental to helping individuals to realise their physical, technical and health performance potential.

This course aims to train you to understand how the mind can impact human behaviour and performance within competitive sport and everyday physical activity settings.

What will I experience?

On this course you will:

Be taught by our BPS Chartered Psychologists and BASES Accredited Sport and Exercise Scientists who have a wealth of experience in research and applied practice in sport and exercise psychology
Use specialist facilities and benefit from our strong links with UK Sport and the Fuchs Foundation

What opportunities might it lead to?

The global sport industry is estimated to be worth in excess of £110 billion and is growing rapidly. You can expect to find a career in many specific areas such as teaching, research, sport science support, or the health and fitness sectors.

This course is accredited by the British Psychological Society, which means that graduates are eligible to apply for the Graduate Basis for Chartered Membership (GBC). It also opens up a wide range of training and development opportunities.

Here are some routes our graduates have pursued:

UK Sport
NHS
Sport governing bodies
Health and fitness companies
Private healthcare companies

Module Details

You can choose to study for this course in either full-time or part-time mode. You will study several key topics and have the valuable opportunity to complete a professional practice placement, where you will be required to perform the role of a trainee sport and/or exercise scientist within a related setting.

Here are the units you will study:

Psychology of Elite Performance: This unit will provide an advanced theoretical, research and practical insight into the psychology of expertise and the role of psychology in optimising performance across a range of elite domains.

Applied Sport Psychology: For this unit you will study contemporary approaches to applied practice and develop a range of professional skills associated with the theory to practice transfer in sport and exercise.

Psychology of Exercise and Physical Activity: This unit covers the emerging field of psychology in physical activity and exercise settings. You will study topics relevant to understanding how psychological theory can influence the promotion and prescription of exercise and physical activity to optimise health and wellbeing.

Applied Research Methods: This unit will provide you with an opportunity to independently investigate a particular topic related to sport/exercise psychology.

Research Project: This unit will provide you with an opportunity to independently investigate a particular topic related to sport/exercise psychology.

Programme Assessment

Our teaching approaches include lectures, seminars, laboratory workshops, and tutorials.

The varying teaching formats are reflected in the assignments. Here’s how we assess you:

Essays
Scientific reports
Reflective accounts
Product development
Presentations
Projects

Student Destinations

Specific careers directly related to this qualification include becoming an applied practitioner, and a researcher and/or a lecturer in sport and/or exercise psychology. Researchers tend to be employed by commercial companies and academic institutions. Lecturers in this field are employed by further and higher educational establishments.

Given the range of general employability skills developed throughout the programme, you could go on to a variety of careers in other sectors, for example, business, the police and the armed services.

Roles our graduates have taken on include:

Sports and exercise scientist
Lecturer in sport and/or exercise psychology
Researcher in sport and/or exercise psychology

Read less
This Masters is professionally accredited by the Chartered Institute of Public Relations. This course is for people who want a Masters with a focus on practical skills in Public Relations. Read more
This Masters is professionally accredited by the Chartered Institute of Public Relations.

Course overview

This course is for people who want a Masters with a focus on practical skills in Public Relations. PR is about reputation. It’s about telling people the ‘what’ and ‘why’ of an organisation, charity, rock band, sports club or fashion brand. It involves a mix of journalism, business and marketing, social networking and communication theory.

Professionally accredited by the Chartered Institute of Public Relations, our Masters course gives you a competitive edge in this fast-moving industry. As part of the course, you will develop a major PR project and undertake related research and contextual studies.
Through rapid development of skills, you will be ready to move seamlessly into a job with a PR agency or in-house communications department.

An important benefit of a Masters at Sunderland is the relevance of our research expertise, which includes web writing and social media. Sunderland hosts the Centre for Research in Media and Cultural Studies (CRMCS) and the Media Department has been recognised for producing some world-leading and internationally excellent research.

To find out more about the part time version of this course, please view this web-page: http://www.sunderland.ac.uk/courses/artsdesignandmedia/postgraduate/publicrelations-part-time/

Course content

The content of the course is shaped by your personal interests with guidance and inspiration from Sunderland's supportive tutors. Modules on this course include:

Public Relations 1 (60 Credits)
-Public Relations: Theory and Practice 1 (30 Credits)
-PR and Society: Ethics and Critical Concepts (15 Credits)
-PR and Marketing Communications (15 Credits)

Public Relations 2 (60 Credits)
-Public Relations: Theory and Practice 2 (30 Credits)
-Social Media and PR (15 Credits)
-Media Research (15 Credits)

Public Relations 3 (60 Credits)
-Dissertation

Teaching and assessment

Compared to an undergraduate course, you will find that this Masters requires a higher level of independent working. The course aims to stretch your creativity and maximise your sense of personal fulfilment.

We use a wide variety of teaching and learning methods which include lectures, seminars, critiques, workshops and practical demonstrations. These are supported by a range of guest speakers from diverse academic and industry backgrounds. You will also have high levels of contact with tutors who give regular feedback and support.

Facilities & location

The facilities at the David Puttnam Media Centre help you gain skills in areas such as writing, page design, online research, managing production, IT, and time management and presentation skills.

The mediaHUB
Throughout your time in Sunderland, you will have an outlet for your creative talents in the mediaHUB, a bustling multimedia newsroom on the top floor of our David Puttnam Media Centre that will give you a real taste of life as a working journalist. The mediaHUB runs websites covering sport, news, entertainments and fashion, provides the content for news bulletins on our award-winning Spark Radio and is responsible for writing and editing Spark magazine.

Journalism/PR suites
We have four journalism suites, each with 18 Apple Mac workstations with design applications and video editing. There’s an additional open access project completion suite with 20 more workstations and colour laser printing.

Broadcast Journalism Newsroom
The Broadcast Journalism Newsroom has 20 workstations plus a Sky feed with two 40” plasma screens. Each workstation has industry-standard software including NewsCutter, Burli and ENPS.

Technical support
The Journalism Newsroom has another 20 Mac workstations and offers drop-in sessions run by a rota of working journalists who can advise on projects, assignments and your personal portfolio. These sessions are available every day of the week during term time. In addition, technicians are available to help you use all the software and equipment.

Radio studios
We have six radio studios including a transmission suite for 107 Spark FM, our student-run community radio station and a city centre hub.

TV studios
We have two broadcast-quality TV studios complete with green room and changing facilities. Equipment includes four Steadicam rigs plus dolly, track and mini crane. We have over 40 full HD tapeless field camera systems.

Other media facilities
We have a live Sky feed and off-air recording facility, including DVD and Blu-ray recording, plus extensive footage archive/library. There is also a 203-seat cinema with full HD projection, 7.1 surround sound facility and the capability to play 3D feature films.

University Library Services
We’ve got a wide range of books, journals and e-books on relevant topics, with many more available through the inter-library loan service. Some useful resources for your studies include:
-Lexis, which provides full-text newspaper articles as well as access to legal information
-JSTOR (short for ‘Journal Storage’), which provides access to important journals across the humanities, social sciences and sciences
-Archival Sound Recordings with over 12,000 hours of recordings
-British Universities Film and Video Council (BUFVC), which provides resources for the production, study and use of film and related media in higher education and research

Employment & careers

Postgraduates are highly employable and, on average, earn more than individuals whose highest qualification is an undergraduate degree. On completing this course you will be equipped for roles throughout the PR and communications industries.

Recent Sunderland graduates are now working in PR consultancies as well as in the PR departments of organisations such as the Environment Agency, Tyne and Wear Sports and AA Press Office.

During the course we encourage you to gain industry experience which will enhance your skills, build up a valuable network of contacts and boost your employability.

A Masters degree will also enhance career opportunities within Higher Education and prepare you for further postgraduate studies.

Read less
Take advantage of one of our 100 Master’s Scholarships to study Computer Modelling and Finite Elements in Engineering Mechanics at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Read more
Take advantage of one of our 100 Master’s Scholarships to study Computer Modelling and Finite Elements in Engineering Mechanics at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Postgraduate loans are also available to English and Welsh domiciled students. For more information on fees and funding please visit our website.

Swansea University has been at the forefront of international research in the area of computational engineering. Internationally renowned engineers at Swansea pioneered the development of numerical techniques, such as the finite element method, and associated computational procedures that have enabled the solution of many complex engineering problems. As a student on the Master's course in Computer Modelling and Finite Elements in Engineering Mechanics, you will find the course utilises the expertise of academic staff to provide high-quality postgraduate training.

Key Features: Computer Modelling and Finite Elements in Engineering Mechanics

Computer simulation is now an established discipline that has an important role to play in engineering, science and in newly emerging areas of interdisciplinary research.

Using mathematical modelling as the basis, computational methods provide procedures which, with the aid of the computer, allow complex problems to be solved. The techniques play an ever-increasing role in industry and there is further emphasis to apply the methodology to other important areas such as medicine and the life sciences.

This Computer Modelling and Finite Elements in Engineering Mechanics course provides a solid foundation in computer modelling and the finite element method in particular.

The Zienkiewicz Centre for Computational Engineering, within which this course is run, has excellent computing facilities, including a state-of-the-art multi-processor super computer with virtual reality facilities and high-speed networking.

Modules

Modules on the Computer Modelling and Finite Elements in Engineering Mechanics course can vary each year but you could expect to study:

Reservoir Modelling and Simulation
Solid Mechanics
Finite Element Computational Analysis
Advanced Fluid Mechanics
Computational Plasticity
Fluid-Structure Interaction
Nonlinear Continuum Mechanics
Computational Fluid Dynamics
Dynamics and Transient Analysis
Computational Case Study
Communication Skills for Research Engineers
Numerical Methods for Partial Differential Equations

Accreditation

The MSc Computer Modelling and Finite Elements in Engineering Mechanics course is accredited by the Joint Board of Moderators (JBM).

The Joint Board of Moderators (JBM) is composed of the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Chartered Institution of Highways and Transportation (CIHT), and the Institute of Highway Engineers (IHE).

The MSc Computer Modelling and Finite Elements in Engineering Mechanics degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

The MSc Computer Modelling and Finite Elements in Engineering Mechanics degree has been accredited by the JBM under licence from the UK regulator, the Engineering Council.

Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

Facilities

Our new home at the innovative Bay Campus provides some of the best university facilities in the UK, in an outstanding location.

Hardware includes a 450 cpu Cluster, high-end graphics workstations and high-speed network links. Extensive software packages include both in-house developed and 'off-the-shelf' commercial.

Links with Industry

The Zienkiewicz Centre for Computational Engineering has an extensive track record of industrial collaboration and contributes to many exciting projects, including the aerodynamics for the current World Land Speed Record car, Thrust SSC, and the future BLOODHOUND SSC, and the design of the double-decker super-jet Airbus A380.

Careers

Employment in a wide range of industries, which require the skills developed during the Computer Modelling and Finite Elements in Engineering Mechanics course, from aerospace to the medical sector. Computational modelling techniques have developed in importance to provide solutions to complex problems and as a graduate of this course in Computer Modelling and Finite Elements in Engineering Mechanics, you will be able to utilise your highly sought-after skills in industry or research.

Research

The Research Excellence Framework (REF) 2014 ranks Engineering at Swansea as 10th in the UK for the combined score in research quality across the Engineering disciplines.

The REF assesses the quality of research in the UK Higher Education sector, assuring us of the standards we strive for.

World-Leading Research

The REF shows that 94% of research produced by our academic staff is of World-Leading (4*) or Internationally Excellent (3*) quality. This has increased from 73% in the 2008 RAE.

Research pioneered at the College of Engineering harnesses the expertise of academic staff within the department. This ground-breaking multidisciplinary research informs our world-class teaching with several of our staff leaders in their fields.

Read less
Engineering is constantly changing, and graduates often need to deepen their technical skills and understanding. This course is especially relevant for mechanical and manufacturing engineers and technicians wishing to broaden their industrial and managerial skills. Read more
Engineering is constantly changing, and graduates often need to deepen their technical skills and understanding.

This course is especially relevant for mechanical and manufacturing engineers and technicians wishing to broaden their industrial and managerial skills. It is ideal for continuing professional development and updating technical skills.

You study eight taught modules drawn from a wide choice of technical and management modules. This gives you advanced tuition in areas of engineering tailored to your career needs such as design, manufacturing, materials, networking or electronics and telecommunications.

We emphasise applying knowledge to relevant workplace skills in areas such as:
-Design, manufacture, electronics, telecommunications and information technology, networking and materials.
-Core management disciplines of quality, finance and marketing and others.

The international product development module involves working in multidisciplinary teams to design and develop a product in the global market.

This flexible course helps you to develop your career based your needs, and helps you on your path towards Chartered Engineer status.

For more information, see the website: https://www.shu.ac.uk/study-here/find-a-course/msc-advanced-engineering

Professional recognition

Accredited by the Institute of Materials, Minerals and Mining (IOM3).

Accredited by the Institution of Mechanical Engineers (IMechE) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as a Chartered Engineer. Accredited MSc graduates who also have a BEng (Hons) accredited for CEng, will be able to show that they have satisfied the educational base for CEng registration. It should be noted that graduates from an accredited MSc programme, who do not also have an appropriately accredited Honours degree, will not be regarded as having the exemplifying qualifications for professional registration as a Chartered Engineer with the Engineering Council; and will need to have their first qualification individually assessed through the Individual Case Procedure if they wish to progress to CEng.

This programme is CEng accredited by the Institution of Engineering and Technology (IET) and fulfils the educational requirements for registration as a Chartered Engineer when presented with an CEng accredited Bachelors programme.

Course structure

Full time – 12 to 18 months.
Part time – typically 3 years, maximum 6 years.
Starts September and January.

Course design
You choose a combination of management, technical and optional modules from a choice of 36. Your choice must total eight 15-credit modules and be agreed with your course leader. At least four must be technical modules.

Optional management modules
-Finance and marketing
-Project and quality management
-Management of strategy, change and innovation
-Lean operations and six sigma
-Manufacturing systems

Optional technical modules
-Group project - international product development
-Competitive materials technology
-Advanced CAD/CAM
-Competitive design for manufacture
-Advanced manufacturing technology
-Advanced metallic materials
-Sustainability, energy and environmental management
-Computer networks
-Communication media
-Network applications
-Communication engineering
-Digital signal processing
-Applicable artificial intelligence
-Microprocessor engineering
-Software engineering
-Operating systems
-Object oriented methods
-Digital electronic system design
-VLSI design
-Industrial applications of finite element methods
-Industrial automation
-Robotics
-Machine vision
-Equipment engineering and design
-Control of linear systems
-Advanced investigatory techniques for materials engineers
-Advanced control methods
-Advanced vibration and acoustics

MSc
-Project and dissertation (60 credits)

Assessment: by final examination; coursework and project reports.

Other admission requirements

Overseas applicants from countries whose first language is not English must normally produce evidence of competence in English. An IELTS score of 6.0 with 5.5 in all skills (or equivalent) is the standard for non-native speakers of English. If your English language skill is currently below an IELTS score of 6.0 with a minimum of 5.5 in all skills we recommend you consider a Sheffield Hallam University Pre-sessional English course which will enable you to achieve an equivalent English level.

Read less
This course is for engineers or graduates who want to become technical specialists or managers in industrial and manufacturing companies. Read more
This course is for engineers or graduates who want to become technical specialists or managers in industrial and manufacturing companies.

It increases your career potential by improving your:
-Knowledge and experience of engineering.
-Technical and problem solving skills.
-Management skills.
-Ability to take on greater responsibility.

This course helps you understand concepts and theories behind developing, manufacturing and managing engineering products and systems. You learn to explore and apply developments in engineering and management academic thinking and industrial practice.

You study:
-Two management modules.
-Two technical modules.
-Four optional modules.

There is a wide range of optional modules including:
-Lean operations and six sigma.
-Advanced manufacturing technology.
-Applicable artificial intelligence.
-Computer-aided design/computer-aided manufacture.
-Advanced computer system architecture.
-Network applications.

The international product development module involves working in multidisciplinary teams to develop a new product in a global market. This allows you to develop much sought after advanced technical and business skills and improves your career prospects in engineering industry, and public service. This project also develops your particular interest in a supported environment.

For more information, see the website: https://www.shu.ac.uk/study-here/find-a-course/msc-advanced-engineering-and-management

Professional recognition

This course is accredited by the Institute of Materials, Minerals and Mining (IOM3).

This course is accredited by the Institution of Mechanical Engineers (IMechE) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as a Chartered Engineer. Accredited MSc graduates who also have a BEng (Hons) accredited for CEng, will be able to show that they have satisfied the educational base for CEng registration. It should be noted that graduates from an accredited MSc programme, who do not also have an appropriately accredited Honours degree, will not be regarded as having the exemplifying qualifications for professional registration as a Chartered Engineer with the Engineering Council; and will need to have their first qualification individually assessed through the Individual Case Procedure if they wish to progress to CEng.

This programme is CEng accredited by the Institution of Engineering and Technology (IET) and fulfils the educational requirements for registration as a Chartered Engineer when presented with an CEng accredited Bachelors programme.

Course structure

Full time – 12 to 18 months.
Part time – typically 3 years, maximum 6 years.
Starts September and January.

Core management modules
-Finance and marketing
-Project and quality management

Core technical modules
-Group project – international product development
-Sustainability, energy and environmental management

Optional modules (two from)
-Lean operations and six sigma
-Management of strategy, change and innovation
-Manufacturing systems

Plus two from:
-Advanced control methods
-Advanced investigatory techniques for materials engineers
-Advanced manufacturing technology
-Advanced metallic materials
-Advanced vibration and acoustics
-Applicable artificial intelligence
-Computer-aided design/computer-aided manufacturing
-Communication engineering
-Communication media
-Computer networks
-Competitive design for manufacture
-Competitive materials technology
-Control of linear systems
-Digital electronics system design
-Digital signal processing
-Embedded systems
-Equipment engineering and design
-Industrial applications of finite element methods
-Industrial automation
-Machine vision
-Microprocessor engineering
-Advanced computer system architecture
-Network applications
-Object-oriented methods
-Operating systems
-Robotics
-Software engineering
-VSLI

MSc
-Project and dissertation

Assessment: examination; coursework; project reports.

Other admission requirements

International students
If English is not your first language you typically need an IELTS 6.0 score with a minimum of 6.0 in writing and 5.5 in all other skills or equivalent. If your English language skill is currently below IELTS 6.0 we recommend you consider a Sheffield Hallam University Pre-sessional English course which will enable you to achieve an equivalent English score.

India
-A first class BE in an relevant discipline, or a good second class BE with a strong performance in mechanical and manufacturing subjects.
China
-A four year Bachelors degree in an relevant discipline, with an overall average of at least 80 per cent or equivalent.
Other countries
-A good honours degree or equivalent in an relevant subject.

Read less
Take advantage of one of our 100 Master’s Scholarships to study Civil Engineering at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Read more
Take advantage of one of our 100 Master’s Scholarships to study Civil Engineering at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Postgraduate loans are also available to English and Welsh domiciled students. For more information on fees and funding please visit our website.

Swansea University has an excellent reputation for civil engineering, the department is recognised as one of the top 200 departments in the world (QS World Subject Rankings).

Key Features of MSc in Civil Engineering

The MSc Civil Engineering course aims to provide advanced training in civil engineering analysis and design, particularly in modelling and analysis techniques.

As a student on the MSc Civil Engineering course you will be provided with in-depth knowledge and exposure to conventional and innovative ideas and techniques to enable you to develop sound solutions to civil engineering problems.

Through the MSc Civil Engineering course, you will also be provided with practical computer experience through the use of computational techniques, using modern software, to provide a solution to a range of current practical civil engineering applications. This will enable you to apply the approach with confidence in an industrial context.

Civil Engineering at Swansea University is recognised as one of the top 200 departments in the world (QS World Subject Rankings).

As a student on the Master's course in Civil Engineering, you will find the course utilises the expertise of academic staff to provide high-quality postgraduate training.

Modules

Modules on the MSc Civil Engineering course typically include:

Water and Wastewater Infrastructure
Finite Element Computational Analysis
Advanced Structural Design
Fluid-Structure Interaction
Entrepreneurship for Engineers
Computational Plasticity
Numerical Methods for Partial Differential Equations
Computational Case Study
Reservoir Modelling and Simulation
Dynamics and Transient Analysis
Coastal Engineering
Coastal Processes and Engineering
Flood Risk Management

Accreditation

The MSc Civil Engineering course at Swansea University is accredited by the Joint Board of Moderators (JBM).

The Joint Board of Moderators (JBM) is composed of the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Chartered Institution of Highways and Transportation (CIHT), and the Institute of Highway Engineers (IHE).

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

See http://www.jbm.org.uk for further information.

This degree has been accredited by the JBM under licence from the UK regulator, the Engineering Council.

Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

Facilities

Our new home at the innovative Bay Campus provides some of the best university facilities in the UK, in an outstanding location.

Hardware includes a 450 cpu Cluster, high-end graphics workstations and high-speed network links. Extensive software packages include both in-house developed and 'off-the-shelf' commercial.

Links with Industry

Strong interaction and cooperation is forged with the construction industry and relevant member institutions of the Joint Board of Moderators (JBM), particularly the Institution of Civil Engineers (ICE) and the Institution of Structural Engineers (IStructE).

These companies actively engaged with Civil Engineering at Swansea University: Atkins, Arup, Balfour Beatty Civil Engineering Ltd, Black and Veatch Ltd, City and Council of Swansea, Dean and Dyball, Halcrow UK, Hyder (Cardiff), Interserve Ltd, the Institution of Civil Engineers (ICE), Laing O’Rourke, Mott MacDonald Group Ltd, Veryard Opus.

Career Prospects

The civil engineering sector is one of the largest employers in the UK and demand is strong for civil engineering graduates. Thie MSc Civil Engineering course also equips you with the skills to be involved in other engineering projects and provides an excellent basis for a professional career in structural, municipal and allied engineering fields.

The MSc Civil Engineering is suitable for those who would like to prepare for an active and responsible career in civil engineering design and construction. Practising engineers will have the chance to improve their understanding of civil engineering by attending individual course modules.

Student Quotes

“I decided to study at the College of Engineering as it is a highly reputable engineering department.

My favourite memories of the course are the practical aspects and the lab work. Group projects have given me the opportunity to work in a team to overcome engineering-based problems. Studying at the College of Engineering has given me a good knowledge of engineering principles and has helped me to apply this to real life problems.

As part of my time here, I took part in the IAESTE programme. I worked with the Department of Civil Engineering at the University of Manipal, Southern India, on a development project involving an irrigation system.

My future plan is to get some experience in an engineering firm, and hopefully, this experience will allow me to work abroad for an NGO on further development projects."

Thomas Dunn, MSc Civil Engineering

Read less
Take advantage of one of our 100 Master’s Scholarships to study Computational Mechanics at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Read more
Take advantage of one of our 100 Master’s Scholarships to study Computational Mechanics at Swansea University, the Times Good University Guide’s Welsh University of the Year 2017. Postgraduate loans are also available to English and Welsh domiciled students. For more information on fees and funding please visit our website.

Swansea University has gained a significant international profile as one of the key international centres for research and training in computational mechanics and engineering. As a student on the Master's course in Erasmus Mundus Computational Mechanics, you will be provided with in-depth, multidisciplinary training in the application of the finite element method and related state-of-the-art numerical and computational techniques to the solution and simulation of highly challenging problems in engineering analysis and design.

Key Features of Erasmus Mundus Computational Mechanics MSc

The Zienkiewicz Centre for Computational Engineering is acknowledged internationally as the leading UK centre for computational engineering research. It represents an interdisciplinary group of researchers who are active in computational or applied mechanics. It is unrivalled concentration of knowledge and expertise in this field. Many numerical techniques currently in use in commercial simulation software have originated from Swansea University.

The Erasmus Mundus MSc Computational Mechanics course is a two-year postgraduate programme run by an international consortium of four leading European Universities, namely Swansea University, Universitat Politècnica de Catalunya (Spain), École Centrale de Nantes (France) and University of Stuttgart (Germany) in cooperation with the International Centre for Numerical Methods in Engineering (CIMNE, Spain).

As a student on the Erasmus Mundus MSc Computational Mechanics course, you will gain a general knowledge of the theory of computational mechanics, including the strengths and weaknesses of the approach, appreciate the worth of undertaking a computational simulation in an industrial context, and be provided with training in the development of new software for the improved simulation of current engineering problems.

In the first year of the Erasmus Mundus MSc Computational Mechanics course, you will follow an agreed common set of core modules leading to common examinations in Swansea or Barcelona. In addition, an industrial placement will take place during this year, where you will have the opportunity to be exposed to the use of computational mechanics within an industrial context. For the second year of the Erasmus Mundus MSc Computational Mechanics, you will move to one of the other Universities, depending upon your preferred specialisation, to complete a series of taught modules and the research thesis. There will be a wide choice of specialisation areas (i.e. fluids, structures, aerospace, biomedical) by incorporating modules from the four Universities. This allows you to experience postgraduate education in more than one European institution.

Modules

Modules on the Erasmus Mundus MSc Computational Mechanics course can vary each year but you could expect to study the following core modules (together with elective modules):

Numerical Methods for Partial Differential Equations
Continuum Mechanics
Advanced Fluid Mechanics
Industrial Project
Finite Element Computational Analysis
Entrepreneurship for Engineers
Finite Element in Fluids
Computational Plasticity
Fluid-Structure Interaction
Nonlinear Continuum Mechanics
Computational Fluid Dynamics
Dynamics and Transient Analysis
Reservoir Modelling and Simulation

Accreditation

The Erasmus Mundus Computational Mechanics course is accredited by the Joint Board of Moderators (JBM).

The Joint Board of Moderators (JBM) is composed of the Institution of Civil Engineers (ICE), the Institution of Structural Engineers (IStructE), the Chartered Institution of Highways and Transportation (CIHT), and the Institute of Highway Engineers (IHE).

This degree is accredited as meeting the requirements for Further Learning for a Chartered Engineer (CEng) for candidates who have already acquired an Accredited CEng (Partial) BEng(Hons) or an Accredited IEng (Full) BEng/BSc (Hons) undergraduate first degree.

See http://www.jbm.org.uk for further information.

This degree has been accredited by the JBM under licence from the UK regulator, the Engineering Council.

Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

Links with Industry

On the Erasmus Mundus MSc Computational Mechanics course, you will have the opportunity to apply your skills and knowledge in computational mechanics in an industrial context.

As a student on the Erasmus Mundus MSc Computational Mechanics course you will be placed in engineering industries, consultancies or research institutions that have an interest and expertise in computational mechanics. Typically, you will be trained by the relevant industry in the use of their in-house or commercial computational mechanics software.

You will also gain knowledge and expertise on the use of the particular range of commercial software used in the industry where you are placed.

Careers

The next decade will experience an explosive growth in the demand for accurate and reliable numerical simulation and optimisation of engineering systems.

Computational mechanics will become even more multidisciplinary than in the past and many technological tools will be, for instance, integrated to explore biological systems and submicron devices. This will have a major impact in our everyday lives.

Employment can be found in a broad range of engineering industries as this course provides the skills for the modelling, formulation, analysis and implementation of simulation tools for advanced engineering problems.



Student Quotes

“I gained immensely from the high quality coursework, extensive research support, confluence of cultures and unforgettable friendship.”

Prabhu Muthuganeisan, MSc Computational Mechanics

Read less
Spatial data play an increasingly important role in many areas of our lives. environmental protection, forecasting, agriculture, and local and regional planning. Read more
Spatial data play an increasingly important role in many areas of our lives: environmental protection, forecasting, agriculture, and local and regional planning. Understanding Geographical Information Systems and GI science is essential for effective management and analysis of spatial data.

Core
• Introduction to GIS
• Spatial Information Science
• Earth Observation and Remote Sensing
• GIS Research Methods Field Trip
• Dissertation tutorial
• Geographical Visualization
• Programming for Spatial Scientists
• Plus a 60 credit master’s dissertation

We recognise the need for challenging and diverse methods of assessment. Our methods vary from traditional examinations, individual oral presentations, reports, web pages, research proposals, literature reviews and posters. We also include an amount of field-based teaching and computer practical sessions in our courses. As well as being taught subject knowledge, you will also receive training on how to plan, develop and execute a programme of individual research. We feel that the development of group skills is very important and a number of pieces of coursework involve a team of people. Coursework feedback is given
promptly and in considerable detail, enabling you to improve continuously.

• The MSc in Geographical Information Science at the University of Leicester is the longest running MSc in GIS in England and offers comprehensive training in GI Science and Systems.
• The MSc in GIS has been recently been accredited by the Royal Institution of Chartered Surveyors (RICS).
• The course is overseen by an employer panel of representatives from industry, government, research and environmental agencies in order to maintain the relevancy of the course content and direction.

Read less

Show 10 15 30 per page


Share this page:

Cookie Policy    X